Omega Products CN9-SW-GRAFIX User Manual

⻬ Communications Software

Designed for Either
RS232 or RS485

⻬ Remote Setpoint

Adjustment

⻬ Instrument Configuration
⻬ Settings Saved to File
⻬ Instrument Program

Cloning

⻬ Logging and Charting
⻬ Log-On Change Feature
⻬ Real-Time and Historical

Mode with Zoom Facility

⻬ Live Display
⻬ Password Security
⻬ Print Options
⻬ Software Can Support Up

to 128 CN9300, CN9400 or
CN9500 Controllers

Software

For CN9300, CN9400 and
CN9500 Series Controllers

Screen displaying alarm condition on instrument 1.
Software alarms provide a screen indication if the measured value falls

below the low alarm and/or rises above the high alarm settings.

CN9-SW
Starts at

$

159

Software for Windows 95,

98, NT, or XP

Hardware Requirements
⻬ Pentium Processor with a

Minimum of 16 Meg of RAM

⻬ A Minimum of 20 MB Free

Hard Disk Space is
Recommended

⻬ Graphic Display Adaptor

Capable of Displaying
256 Colors (VGA)

⻬ Serial Port for Single

RS232 Instrument
(or RS485 Adaptor for
Multiple Instruments)

⻬ MS Mouse and Keyboard
⻬ CN9300, CN9400, CN9500

Fitted with RS232 or
RS485 Communications

The CN9-SW software is
designed to interface with the
CN9300, CN9400 and CN9500
Series controllers with optional
communication hardware. The
CN9-SW takes up approximately
1 MB. The size is dependent on
the number of controllers and
the frequency that they are being
logged. A very approximate figure
is per reading: 12 bytes date/time
plus 4 bytes for each instrument
being logged. Designed for use
on laptops or PC’s, this new
development provides the
user with:

• Time saving benefit and
convenience of remotely
configuring and adjusting units.

• Saving and retrieving settings

to and from files.

• Cloning settings to other

instruments.

• Highly flexible logging and

“real time” charting capability for
providing hard copy QA records
for ISO-9000 and other
management purposes.

P-37

1

⁄

16

DIN

CN9300

shown smaller

than actual size

Sample of graph displaying “real-time
charting.” Software is capable of logging
readings from up to 128 instruments
which it stores in data files. The data can
be exported into text files in C.S.V.
(Comma Separated Variable) format. In
addition, up to 12 controllers can be
displayed on a single chart, or individual
charts can be set up for each instrument.
Virtual full color chart recorder can log
process variables such as: °C, °F, Bar,
PSI, pH, or rH. User definable engineering
unit “Set” can be selected on the
controller to log other process variables.

The CN9-SW software
is a powerful process
development tool for
the OEM customer or
process engineer. With
compatible modems and
PC computers, remote site
supervisory control and data
acquisition can take place to
facilitate periodic or continuous
monitoring and troubleshooting.

Data is stored to file in a tamper
resistant format to ensure the integrity
of reports for quality monitoring
requirements. Build your own multi-loop
system with the CN9300/CN9400/
CN9500 series controllers and CN9-SW
software. Allows both local and remote
adjustment. The CN9-SW software
can be used as a production tool for
the OEM. Downloading menu settings
to controllers during production saves
time and eliminates errors.

Screen depicting the setup of the cloning
function for multiple controllers. When a
satisfactory instrument configuration has
been achieved, these settings can be
cloned to other instruments on
the network or saved to
a file for later use.

To Order

(Specify Model Number)

Model No. Price Description
CN9-SW $159 Software
CN9-SW-GRAFIX 299 Software*

Ordering Example: CN9-SW, software for
CN9300, CN9400, CN9500 Series Controller, $159.

Molded transition joint

thermocouple probe

KTSS-316G-12, $19.

See page A-83.

For Additional Controllers

and Indicators, See Section M

P-38

P

*

CN9-SW-GRAFIX includes the CN9-SW
features plus supports ramp/soak profiles
of the CN9600 controllers with graphic
program building, dynamic data exchange,
and enhanced trending/charting. Network
and OPC compatible client/server software
available on special request.

1

⁄

16

DIN

CN9400

1

⁄

32

DIN

CN9500

Shown smaller

than actual size.

Shown smaller

than actual size.

AVAILABLE FOR FAST DELIVERY!