Omega Products CN351-JC2 User Manual

P-31

1

⁄16 DIN Temperature Controllers

The CN350, CN360, and CN370
Series controllers are economical
and easy to use. Models are
available with digital, deviation,
or non-indicating display, for
J, K, R, and S thermocouples or
100 Ω platinum RTD input. The
small 48 mm (1.88") square face,
45 mm (1.77") square cutout
(1⁄16 DIN), and short 90 mm (3.54")

CN370 Series

Starts at

$

199

CN360 Series

Starts at

$

159

CN350 Series

Starts at

$

139

⻬ Economical, Easy-to-Use
⻬1⁄16 DIN Panel Cutout
⻬ Input Types:

J, K, R, S Thermocouples
and 100 Ω Platinum RTD

⻬ Fixed Proportional Band

(4%) with Manual Reset

⻬ Fixed Cycle Time:

30 s for Mechanical
Relay and 3 s for
DC Solid State Output

⻬ User Convertible for

Proportional or
On/Off Control

Specifications

Accuracy:

Thermocouple Input:

±1.5% FS + 1 digit

RTD Input: ±1.0% + 1 digit

Resolution: 1°C or °F

(P2CX range: 0.1°C)
Output Types: SPDT mechanical relay,

240 Vac, 2.5 A resistive load
(1 A inductive load) solid state voltage
driver, 12 Vdc, 20 mA max—reverse
action (NO) for heating

Power Supply: 115/230 Vac ±10%,
50/60 Hz; optional 24 Vdc
(relay models only)

Input:

3-Wire RTD (Pt100):

0.00385 Ω/Ω/°C excitation, 2 mA
lead wire resistance, 2 Ω max
per wire (approximately 190' of
20-gage copper wire)

Thermocouple J, K, R*, S*
(*Non-Indicating Models Only):

Input resistance, 200 kΩ; lead
wire resistance, 100 Ω max;
up-scale protection circuit standard

Control Mode: Proportional band, 4%
FS fixed; manual reset, adjustable from
front face on/off; deadband/hysteresis,

0.3% FS fixed

KTSS-316G-6, $19, molded transition
joint thermocouple probe.
See page A-74.

Shown larger than
actual size.

depth behind the panel helps
conserve space and cut installation
costs. All models have a digital
thumbwheel for adjusting the setpoint.

The CN370 Series models provide
continuous digital display of the
process temperature. The CN360
Series models indicate whether the
process temperature is within ±1.5%
FS of the setpoint or above or below
setpoint. The CN350 Series models
are non-indicating.

These controllers are time
proportional with manual reset,
and can be converted to on/off
control by changing internal
jumpers. The proportional band
is fixed at 4%.

Two types of outputs are available.
A 2.5 A (SPDT) mechanical relay is
for use with systems that can use a
30-second cycle time. With
an external solid state relay, loads
to 5 A can be accommodated.

For systems that require a faster
cycle time, the DC solid state driver
output should be used. This has
a cycle time of approximately
3 seconds and can control high
AC loads by using a DC-controlled
solid state relay.

P-32

P

To Order

(Specify Model Number)

Relay Output Models

DC Pulse Output Models Input

Indicating Deviation Non-Indicating Indicating Deviation Non-Indicating

$199 $159 $139 $199 $159 $139 Sensor Range

CN371-JC2 CN361-JC2 CN351-JC2 CN372-JC2 CN362-JC2 CN352-JC2 0 to 399°C
CN371-JF3 CN361-JF3 CN351-JF3 CN372-JF3 CN362-JF3 CN352-JF3 0 to 499°F
CN371-JF4 CN361-JF4 CN351-JF4 CN372-JF4 CN362-JF4 CN352-JF4 0 to 799°F
CN371-KC2 CN361-KC2 CN351-KC2 CN372-KC2 CN362-KC2 CN352-KC2 0 to 399°C
CN371-KC5 CN361-KC5 CN351-KC5 CN372-KC5 CN362-KC5 CN352-KC5 0 to 999°C

— — CN351-KC6 — — CN352-KC6 0 to1199°C

CN371-KF5 CN361-KF5 CN351-KF5 CN372-KF5 CN362-KF5 CN352-KF5 0 to 999°F

— — CN351-KF8 — — CN352-KF8 0 to 1999°F
——

CN351-RC7

——

CN352-RC7 0 to 1699°C

——

CN351-RF9

——

CN352-RF9 0 to 2999°F

——

CN351-SC7

——

CN352-SC7 0 to 1699°C
CN371-P1C1 CN361-P1C1 CN351-P1C1 CN372-P1C1 CN362-P1C1 CN352-P1C1 -99 to 99°C
CN371-P2CX CN361-P2CX CN351-P2CX CN372-P2CX CN362-P2CX CN352-P2CX 0 to 99.9°C
CN371-P1C2 CN361-P1C2 CN351-P1C2 CN372-P1C2 CN362-P1C2 CN352-P1C2 0 to 399°C
CN371-P1F2 CN361-P1F2 CN351-P1F2 CN372-P1F2 CN362-P1F2 CN352-P1F2 0 to 399°F
CN371-P1F4 CN361-P1F4 CN351-P1F4 CN372-P1F4 CN362-P1F4 CN352-P1F4 0 to 799°F

Comes with complete operator’s manual.
For low-voltage, 24 Vdc power, add suffix "-24VDC", no extra charge. Low-voltage power is not available on DC pulse series
CN372, CN362 or CN352 models.

Ordering Example: CN371-JC2-24VDC, digital-indicating, proportional or on/off controller,
thermocouple type, range 0 to 399°C, with 24 Vdc power, $199.

45

(1.722)

45

(1.722)

Controller Panel Cutout

Rear Screw

Terminal

Connections

Shown smaller
than actual size.

Transition Joint Probes

Sold Separately.

See Page A-75

Dimensions: mm (in)

Rear Screw Terminal Connections

MOST POPULAR MODELS HIGHLIGHTED!

Companion Limit

Controllers

CN375 and CN355

Available.

See Page P-106

Cycle Time:

Mechanical Relay:

Approximately 30 s fixed

DC Solid State Relay Driver:

Approximately 3 s fixed

Power Consumption: Approximately
3 VA

Operating Ambient Range:

5 to 45°C (40 to 112°F), 90% RH
Insulation Resistance: 500 Vdc,

20 MΩ min between input and power
supply terminals

Connection: Screw terminals
Installation: Lock-in mounting type

(no mounting hardware necessary)

Dimensions (

1

⁄16 DIN):

45 mm (1.77") square panel cutout,
48 mm (1.88") square face,
90 mm (3.54") depth behind panel

Panel Thickness: 1 to 3.5 mm
(0.04 to 0.14")

Weight: 210 g (0.463 lb)