Omega Products CN2516-R1 User Manual

1
16 DIN Temperature/Process
Limit Controllers
CN2516 Series
FM
APPROVED
Dual Display Universal Input High/Low Limit Limit Relay Output
(Fixed)
Additional Modular
Outputs (Optional)
RS485 (Optional) Remote Reset (Optional)
The CN2516 Series is part of a range of new generation of limit controllers that incorporate numerous product specification, communication, display interface and software improvements that surpass competitive limit device offerings in ease of use and programming. By adding more versatile features and user-friendly functionality like digital inputs, an easy-to-use HMI, jumperless and auto-hardware configuration, 24 Vdc transmitter power supply and MODBUS® communicationacross the range, the CN2516 limit controllertransform the complicated into the simple while saving you time (as much as 50% on product set-up), reducing inventory stock and virtually eliminating the likelihood of operator errors. The CN2516 limit controllers are affordable, well-featured, easy to use and adaptable with performance features that work for you to make limit control simple. The CN2516 is a fail-safe protection device to prevent damage toequipment or products. It will shut down process when a preset temperature is reached and cannot be reset by the operator until the process has returned to a safe condition.
Specifications
Environmental Characteristics
Operating Temperature: 0° to 55°C
(32° to 131°F) Storage Temperature: -20° to 80°C
(-4° to 176°F)
Humidity:
Electrical
Supply Voltage: 100 to 240 V, 50/60 Hz,
optional 20 to 48 Vac 50/60 Hz or 22 to 65 Vdc
Power Consumption: 5 W/7.5 VA maximum
Inputs
Thermocouples: J, T, K, L, N, B, R, S, C;
Pt Rh 20% vs. Pt 40% Rh RTD: 3-wire, PT100 DC linear (scalable
-1999 to +9999)
Volts: 0 to 5V, 1 to 5V, 0 to 10V, 2 to 10V DC Milliamps: 0 to 20 mA or 4 to 20 mA DC Millivolts: 0 to 50mV, 10 to 50mV
Outputs
Output 1: (Limit relay) fixed; outputs Output 2 and 3: (Alarm relay) are
user-selectable and customized based on desired application; choose from the following output types
20 to 95% non-condensing RH
P-1
CN2516
Maximum # of Outputs: 3 for alarm,
24 Vdc transmitter power supply or retransmit of process value/limit trip setpoint
Limit Relay: SPDT; 240 Vac 5 A resistive; lifetime >100,000 operations at rated voltage/current
Alarm Relay: Optional SPDT; 240 Vac 2 A resistive; lifetime >500,000 operations at rated voltage/current
SSR Drive: Optional Drive Capability:
>10 Vdc nominal into 500 Ω minimum DC Linear: Optional 0 to 20 mA,
4 to 20 mA into 500 Ω max; 0 to 10V, 1 to 5V, 2 to 10V, 0 to 5V into 500 Ω min; outputs have 2% over/under drive applied; accuracy ±0.25% (mA into 250 Ω load, V into 2k Ω load); degrading linearity to ±0.5% for increasing burden to specified limits
Triac: Optional 0.01 to 1 A AC, 20 to 280 Vrms, 47 to 63 Hz (limit 2)
Transmitter Power Supply: Optional 24 Vdc (limit 1)
P
Impedance: >10M Ω for the thermocouple and mV ranges, 47 kΩ for V ranges and 5 Ω for mA ranges
Output Functions
Process Alarm: (Reverse or direct)
modes (alarm 1 and 2): high/low, band, deviation, logical OR/AND
Retransmit: Process value or limit setpoint
Electrical Performance
Accuracy: ± 0.1% of input range
±1 LSD (thermocouple CJC better than 1°C)
Input Sample Rate: 4 per second, 14-bit resolution
Sensor Break Detection: <2 seconds (except zero based DC ranges), limit output opens, low alarms activate for RTD, mA or V ranges
Communications Interface
User-Selectable: 2-wire, RS485 serial
communications option with choice of MODBUS RTU or ASCII protocol; 1200 to 19200 baud
PC Configuration: Offline configuration from serial port to dedicated configuration socket (comms option not required)
Protection
IEC IP66 (NEMA 4X) front panel IEC IP20 (behind the panel protection)
Dimensions
Panel Cutout: 45 x 45 mm
(1.77 x 1.77")
Height: 48 mm (1.89") Width: 48 mm (1.89") Depth: 110 mm (4.33") Weight: 0.21 kg (0.46 lb) Mounting: Plug in panel with
fixing strap
Input Type Range
-328 to 1399°F (-200 to 1373°C) 32 to 1401°F (0 to 761°C)
-328 to 503°F (-200 to 262°C) 32 to 2550°F (0 to 1399°C) 32 to 3002°F (0 to 1650°C) 32 to 3000°F (0 to 1649°C) 211 to 3315°F (100 to 1824°C) 32 to 1403°F (0 to 762°C) 32 to 4208°F (0 to 2320°C) Pt 100 RTD (0.00385) -328 to 1472°F (-199 to 800°C) 0 to 20 mA, 4 to 20 mA -1999 to 9999 0 to 10 Vdc, 0 to 5 Vdc, 0 to 50 mVdc -1999 to 9999
CN2516
SM
Extended Warranty
Program
OMEGACARESM extended warranty program is available for models shown on this page. Ask your sales representative for full details when placing an order. OMEGACARESM covers parts, labor and equivalent loaners.
To Order Visit omega.com/cn2516 for Pricing and Details
Model No. Description CN2516-R1 Single output, relay CN2516-R1-LV Single output, relay, low voltage
Output and Communications Options (Field Installable modules) Output 2 and 3 Slot
2500X-R Relay module 2500X-DC DC pulse module 2300X-F2 Linear DC module 2500X-T Triac module (output 2 only) 2300X-TPS Transmitter power supply (output 3 only)
Option A Slot
2300X-485 RS485 communications 2300X-DI Digital input
Model No. Description CN2500-SOFT Configuration software CNQUENCHARC Noise suppression kit, 110 to 230 Vac
Comes complete with mounting bracket and operator's manual.
Ordering Example: CN2516-R1, single output controller and operator’s manual. OCW-2, OMEGACARE
SM
extends standard 3-year warranty to a total of 5 years.
P-2
P
Loading...