Olympus D-555 ZOOM Basic Manual

DIGITAL CAMERA

D-555 ZOOM

B

M

a

a

s

n

c

i

u

a

l

ENGLISH

FRANÇAIS

ESPAÑOL

2

30

58

• Thank you for purchasing an Olympus digital camera. Before you start to use your
new camera, please read these instructions carefully to enjoy optimum performance
and a longer service life.

• This manual explains shooting and playback basics. For details on functions, read the
advanced manual. Keep this manual in a safe place for future reference.

• We recommend that you take test shots to get accustomed to your camera before
taking important photographs.

• The screen and camera illustrations shown in this manual were produced during the
development stages and may differ from the actual product.

For customers in North and South America

For customers in USA

Declaration of Conformity
Model Number : D-555 ZOOM
Trade Name : OLYMPUS
Responsible Party :

En

Address : Two Corporate Center Drive, P.O. Box 9058, Melville, NY

Telephone Number : 1-631-844-5000

Tested To Comply With FCC Standards
FOR HOME OR OFFICE USE

This device complies with Part 15 of the FCC rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may

cause undesired operation.

For customers in Canada

This Class B digital apparatus meets all requirements of the Canadian Interference­Causing Equipment Regulations.

11747-9058 U.S.A.

Trademarks

• IBM is a registered trademark of International Business Machines Corporation.

• Microsoft and Windows are registered trademarks of Microsoft Corporation.

• Macintosh is a trademark of Apple Computer Inc.

• ImageLink/Easyshare are trademarks of the Eastman Kodak Company.

• xD-Picture Card™ is a trademark.

• All other company and product names are registered trademarks and/or
trademarks of their respective owners.

• The standards for camera file systems referred to in this manual are the “Design
Rule for Camera File System/DCF” standards stipulated by the Japan
Electronics and Information Technology Industries Association (JEITA).

2

Manual Contents

Safety Precautions....................................................... 4

UNPACKING THE BOX CONTENTS

LOADING THE BATTERIES............................. 13

INSERTING THE MEMORY CARD ..................... 16

TURNING THE CAMERA ON ........................... 19

TAKING A PICTURE...................................... 21

REVIEWING A PICTURE ................................ 23

TURNING THE CAMERA OFF ..........................24

Enjoy the camera more.............................................. 25

Things you can do with this camera............................. 25

Things you can do with the IMAGELINK PRINTER ..... 26

................... 11

En

Installing OLYMPUS Master Software.......................... 27

Specifications............................................................. 28

3

Safety Precautions

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED OLYMPUS SERVICE PERSONNEL.

Lightning flash with an arrowhead, enclosed in a tria ngle, alerts you to the presence of uninsulated voltage
points inside the product which could cause a s erious electrical shock.

An exclamation mark enclosed in a triangle alerts you to important operating and maintenance instructions in
the documentation provided with the product.

WARNING!
TO AVOID THE RISK OF FIRE OR ELECTRICAL SHOCK, NEVER EXPOSE THIS PRODUCT TO WATER OR

En

OPERATE IN A HIGH HUMIDITY ENVIRONMENT.

General Precautions

Read All Instructions — Before you use the product, read all operating

instructions.

Save These Instructions — Save all safety and operating instructions for future

reference.

Heed Warnings — Read carefully and follow all warning labels on the product and

those described in the instructions.

Follow Instructions — Follow all instructions provided with this product.
Cleaning — Always unplug this product from the wall outlet before cleaning. Use

only a damp cloth for cleaning. Never use any type of liquid or aerosol cleaner,
or any type of organic solvent to clean this product.

Attachments — For your safety, and to avoid damaging the product, use only

accessories recommended by Olympus.

Water and Moisture — Never use this product around water (near a bathtub,

kitchen sink, laundry tub, wet basement, swimming pool or in the rain). For
precautions on products with weatherproof designs, read the weatherproofing
sections of their manuals.

4

Safety Precautions

Location — To avoid damage to the product and prevent personal injury, never

place this product on an unstable stand, tripod, bracket, table or cart. Mount
only on a stable tripod, stand, or bracket. Follow the instructions that describe
how to safely mount the product, and use only the mounting devices
recommended by the manufacturer.

Power Sources — Connect this product only to the power source described on

the product label. If you are not sure about the type of power supply in your
home, consult your local power company. Refer to your operating instructions
for information on using the product with a battery.

Grounding, Polarization — If this product can be used with a specified AC

adapter, the adapter may be equipped with a polarized alternating current line
plug (a plug with one blade wider than the other). This safety feature allows the
plug to fit into the power outlet only one way. If you cannot insert the plug into
the wall outlet, pull it out, reverse it, and then reinsert it. If the plug still fails to
fit, contact an electrician and have the receptacle replaced.

Protecting the Power Cord — The power supply cord should be placed so it will

not be walked on. Never put a heavy object on the power cord or wrap it around
the leg of a table or chair. Keep the area around the power cord connection
points, at the power outlet, and at the product connection, free of all AC adapter
or accessory power cords.

Lightning — If a lightning storm occurs while using a specified AC adapter,

remove it from the wall outlet immediately. To avoid damage from unexpected
power surges, always unplug the AC adapter from the power outlet and
disconnect it from the camera when the camera is not in use.

Overloading — Never overload wall outlets, extension cords, power strips, or

other power connection points with too many plugs.

Foreign Objects, Liquid Spillage — To avoid personal injury caused by fire or

electrical shock from contact with internal high voltage points, never insert a
metal object into the product. Avoid using the product where there is a danger
of spillage.

Heat — Never use or store this product near any heat source such as a radiator,

heat register, stove, or any type of equipment or appliance that generates heat,
including stereo amplifiers.

Servicing — Refer all servicing to qualified personnel. Attempting to remove the

covers or disassemble the product, could expose you to dangerous high
voltage points.

En

5

Safety Precautions

Damage Requiring Service — If you notice any of the conditions described below

while using a specified AC adapter, unplug it from the wall outlet and refer
servicing to qualified service personnel:
a) Liquid has been spilled onto the product or some other object has fallen into

the product.
b) The product has been exposed to water.
c) The product does not operate normally despite following operating

instructions. Adjust only the controls described in the operating instructions

as improper adjustment of other controls could damage the product and

require extensive repair work by a qualified technician.
d) The product has been dropped or damaged in any way.
e) The product exhibits a distinct change in performance.

Replacement Parts — When replacement parts are required, make sure that the

service center uses only parts with the same characteristics as the originals, as
recommended by the manufacturer. Unauthorized substitution of parts could

En

result in fire, electrical shock, or create other hazards.

Safety Check — Upon completion of servicing or repairs, ask the service

technician to perform safety checks to determine that the product is in good
working order.

If the product is used without observing the information given under this

DANGER

WARNING

CAUTION

symbol, serious injury or death may result.

If the product is used without observing the information given under this
symbol, injury or death may result.

If the product is used without observing the information given under this
symbol, minor personal injury, damage to the equipment, or the loss of
valuable data may result.

Handling the Camera

WARNING

( Do not use the camera near flammable or explosive gases.

• To avoid causing a fire or explosion, never use the camera near flammable
or explosive gases.

( Do not use the flash on people (infants, small children, etc.) at

close range.

• Use caution when taking flash pictures at close range. When you fire the
flash, you must be at least 1 m (3 ft.) away from the faces of your subjects,
especially when taking pictures of infants and small children. Firing the flash
too close to the subject’s eyes could cause a momentary loss of vision.

6

Safety Precautions

( Keep young children and infants away from the camera.

• Always use and store the camera out of the reach of young children and
infants to prevent the following dangerous situations which could cause
serious injury:

• Becoming entangled in the camera strap, causing strangulation.

• Accidentally swallowing the battery, cards or other small parts.

• Accidentally firing the flash into their own eyes or those of another child.

• Accidentally being injured by the moving parts of the camera.

( Do not look at the sun or strong lights with the camera.

• To avoid damaging your eyes, never aim the camera directly into the sun,
or any other extremely bright light source.

( Do not touch charging batteries (included in some areas) or the

battery charger until charging is finished and the batteries have
cooled.

• The batteries and battery charger become hot while charging. A specified
AC adapter also becomes hot during long use. At these times, they may
cause minor burns.

( Do not use or store the camera in dusty or humid places.

• Using or storing the camera in dusty or humid places may result in a fire or
electric shock.

( Do not cover the flash with a hand while firing.

• Do not cover the flash with a hand while firing or touch it after it has just been
fired. It may be hot and cause minor burns. Avoid using the flash for
extended periods.

( Do not take apart or modify the camera.

• Never attempt to disassemble the camera. The internal circuits contain high
voltage points which could cause serious burns or electrical shock.

( Do not let water or foreign objects inside the camera.

• If the camera is accidentally dropped in water, or if liquid is spilled into the
camera, stop using it, allow it to dry, and then remove the batteries. Contact
the nearest authorized Olympus service center.

En

CAUTION

( Stop using the camera immediately if you notice any unusual

odors, noise, or smoke around it.

• If you notice any unusual odors, noise, or smoke around the camera during
operation, switch it off immediately – and disconnect a specified AC adapter
(if attached). Allow the camera to sit idle for a few minutes to cool. Take the
camera outdoors, away from flammable objects, and carefully remove the
batteries. Never remove the batteries with bare hands, which may cause a
fire or burn your hands. Contact the nearest Olympus service center
immediately.

7

Safety Precautions

( Do not use the camera with wet hands.

• To avoid dangerous electrical shock, never hold or operate the camera with
wet hands.

( Do not leave the camera in places where it may be subject to

extremely high temperatures.

• Doing so may cause parts to deteriorate and, in some circumstances, cause
the camera to catch fire. Do not use the charger or AC adapter if it is covered
(such as a blanket). This could cause overheating, resulting in fire.

( Handle the camera with care to avoid getting a low-temperature

burn.

• When the camera contains metal parts, overheating can result in a low­temperature burn. Pay attention to the following:

• When used for a long period, the camera will get hot. If you hold on to the

camera in this state, a low-temperature burn may be caused.

En

• In places subject to extremely cold temperatures, the temperature of the

camera’s body may be lower than the environmental temperature. If
possible, wear gloves when handling the camera in cold temperatures.

( Be careful with the strap.

• Be careful with the strap when you carry the camera. It could easily catch
on stray objects – and cause serious damage.

( Use only the AC adapter specified by Olympus.

• Never use any AC adapter except one specified by Olympus. Using a
different AC adapter may damage the camera or power source, or result in
accidents or fire. Ensure the adapter used is designed for your region or
country. For more information, contact the nearest Olympus service center
or the store of purchase. Olympus makes no representations or warranties
regarding any damages caused by AC adapters not recommended by
Olympus.

( Do not damage the power-supply cord.

• Never pull or modify the power-supply cord of the AC adapter or
accessories. Make sure only the plug is securely held during insertion and
removal from the outlet. Stop using the camera immediately, and contact the
nearest Olympus service center or the store of purchase if:

• The power-supply cord becomes hot, or it gives off smoke or unusual

odors.

• The power-supply cord is cut or damaged, or the plug has a faulty

contact.

8

Safety Precautions

Battery handling precautions

Follow these important guidelines to prevent batteries from leaking,
overheating, burning, exploding, or causing electrical shocks or burns.

DANGER

• When using NiMH batteries (included in some areas), use only the Olympus
brand NiMH batteries and fitting charger.

• Never heat or incinerate batteries.

• Take precautions when carrying or storing batteries to prevent them from
coming into contact with any metal objects such as jewelry, pins, fasteners, etc.

• Never store batteries where they will be exposed to direct sunlight, or subjected
to high temperatures in a hot vehicle, near a heat source, etc.

• To prevent causing battery leaks or damaging their terminals, carefully follow all
instructions regarding the use of batteries. Never attempt to disassemble a
battery or modify it in any way, by soldering, etc.

• Never attempt to connect a battery directly to a power outlet, or to a cigarette
lighter in a vehicle.

• If battery fluid gets into your eyes, flush your eyes immediately with clear, cold
running water and seek medical attention immediately.

• Always store batteries out of the reach of small children. If a child accidentally
swallows a battery, seek medical attention immediately.

WARNING

• Keep batteries dry at all times. Never allow them to come into contact with fresh
or salt water.

• To prevent batteries from leaking, overheating, or causing a fire or explosion,
use only batteries recommended for use with this product.

• Never mix batteries (old and new batteries, charged and uncharged batteries,
batteries of different manufacture or capacity, etc.).

• Never attempt to charge alkaline, lithium or CR-V3 lithium battery packs.

• Insert the battery carefully as described in the operating instructions. Never load
the battery with its +/- terminals reversed. Never force the battery into the battery
compartment.

• Do not use batteries if their body is not covered by the insulating sheet or if the
sheet is torn, as this may cause fluid leaks, fire, or injury. Do not use these
batteries even if they were purchased in this condition.

En

9

Safety Precautions

• The following AA (R6) batteries cannot be used.

Batteries whose
bodies are only
partially or not at all
covered by an
insulating sheet.

En

• If NiMH batteries (included in some areas) are not charged within the specified

time, stop charging them and do not use them.

• Do not use a battery if it is cracked or broken.

• If a battery leaks, becomes discolored or deformed, or becomes abnormal in

any other way during operation, stop using the camera and consult your dealer
or an authorized Olympus service center. Continued use may result in fire or
electric shock.

• If a battery leaks fluid onto your clothing or skin, remove the clothing and flush

the affected area with clean, running cold water immediately. If the fluid burns
your skin, seek medical attention immediately.

• Never attempt to modify the battery compartment on the camera, never insert

anything (other than the recommended battery) into the battery compartment.

• Never subject batteries to strong shocks or continuous vibration.

Batteries whose ­terminals are raised,
but not covered by an
insulating sheet.

Batteries whose
terminals are flat and
not completely covered
by an insulating sheet.
(Such batteries cannot
be used even if the
terminals are partially
covered.)

CAUTION

• Before loading, always inspect the battery carefully for leaks, discoloration,

warping, or any other abnormality.

• The batteries may become hot during prolonged use. To avoid minor burns, do

not remove it immediately after using the camera.

-

10

UNPACKING THE BOX CONTENTS

If you find any contents missing or damaged, contact the place of
purchase.

Digital Camera

AA (R6) Alkaline

Batteries (two)

Printer Paper Tray AC Adapter Power Cord

Ink ribbon cartridge

for 4 × 6 printing

Strap Card Camera Insert

Warranty Card

Basic Manual

(this manual)

Advanced Manual

USB Cable

4 × 6 Paper

OLYMPUS Master

CD-ROM

Printer Warranty Card

Instruction Manual

Registration Card

Note

Be sure to carefully read the instruction manual for the printer in addition to

this one.

Camera

En

(CD-ROM)

11

UNPACKING THE BOX CONTENTS

Attaching the strap

Attach the strap as shown.

1

Â

En

Strap eyelet

Pull the strap tight so that it does not come loose.

Note

Be careful with the strap when you carry the camera, as it can easily catch on

stray objects, causing injury or damage.

Attach the strap correctly as shown above. Olympus is not responsible for any

damages resulting from the strap coming loose due to incorrect attachment.

12

LOADING THE BATTERIES

Make sure the camera is turned off.

1

The POWER switch is located at OFF.

Open the battery compartment cover.

2

Lift

o

Slide

n

Insert the batteries.

3

En

Battery compartment
cover

The battery insertion direction is indicated in the battery compartment

and on the bottom of the camera.

13

LOADING THE BATTERIES

Close the battery compartment cover.

4

Close

n

Slide

o

Press down on the center of the cover when sliding.

En

The battery

In addition to the batteries provided with the camera, the following types of
battery can be used. Choose the power source best suited to the situation.

(AA (R6) alkaline batteries

When you need batteries in a hurry, you can use AA (R6) alkaline batteries, which are
easy to obtain anywhere. However, the number of pictures that you can take may vary
considerably depending on the battery manufacturer, shooting conditions, etc.
This camera uses two AA (R6) alkaline batteries.

(NiMH batteries (rechargeable batteries)

Olympus NiMH batteries are rechargeable and economical. However, repeatedly charging
the batteries before using up their capacity will shorten the life of the batteries per charge.
The batteries are not fully charged at the time of purchase. Charge the batteries with the
battery charger specified by Olympus before use. For details, refer to the instruction
manual for your charger.
This camera uses two NiMH batteries.

(Lithium battery pack (CR-V3)

The Olympus CR-V3 lithium battery pack has a long service life
allowing you to use the camera longer than with alkaline
batteries. However, it cannot be recharged. Do not remove the
label on the battery pack.
This camera uses one lithium battery pack.

Important
Manganese (zinc-carbon) batteries cannot be used.

14

LOADING THE BATTERIES

Note

Power consumption by the camera varies depending on which functions are

used.

Power is consumed continuously during the conditions described below

causing batteries to become exhausted quickly.

The monitor is turned on.
The monitor is on in playback mode for an extended period of time.
The zoom is used repeatedly.
The shutter button is pressed halfway repeatedly in shooting mode,

activating the auto focus.

The camera is connected to a computer or printer.

Battery life varies depending on the type of battery, manufacturer, shooting

conditions, etc.

Using exhausted batteries or alkaline batteries may cause the camera to turn

off without displaying the battery level warning.

En

15

INSERTING THE MEMORY CARD

Make sure the camera is off.

En

1

2

The POWER switch is located at OFF.

Card cover

Open the card cover.

Card cover

16

Insert the card.

3

To remove the card

Push the card all the way in and
release slowly.

Note

The card may not record properly if it is not inserted all the way in.
Releasing your finger quickly after pushing the card all the way in may

cause it to eject forcefully out of the slot.

Close the card cover.

4

INSERTING THE MEMORY CARD

Notch

Contact area

Make sure that the card is

oriented correctly and
insert while keeping it
straight, otherwise the
contact area on the card
may be damaged or the
card may get stuck.

Grasp and remove.

Â

En

17

INSERTING THE MEMORY CARD

The card

This camera uses an xD-Picture Card (16MB – 1GB).

Index area

You can use this space to write the contents of the card.

Contact area

The part where the data transferred from the camera
enters the card.

Note

En

This camera may not recognize a non-OLYMPUS card or a card that was

formatted on another device (such as a computer, etc.). Before use, be sure
to format the card on this camera.

Do not press on the card with hard or pointed items such as ballpoint pens.
Never open the battery compartment cover or the card cover, or remove the

card or the battery while the camera is turned on. Doing so could destroy the
data stored on the card. Once destroyed, data cannot be restored.

Do not place a sticker or label on the card as this could prevent the card from

being ejected.

18

TURNING THE CAMERA ON

Slide the POWER switch to K, pressing and
holding the lock button.

1

POWER switch

Lock button

Battery check indicator

Shooting mode

The camera turns on when the

POWER switch is set to shooting
mode.

The lens extends and the monitor

turns on.

Note

To save battery power, the camera automatically enters sleep mode and stops

operating after about 3 minutes of non-operation. The camera activates again
as soon as you lightly press the shutter button or zoom lever.

4 hours after the camera enters sleep mode, the camera turns off

automatically. Turn the camera on to use.

En

19

TURNING THE CAMERA ON

When you first turn on the camera

Languages available on the camera

Available languages may vary according to
where you purchased the camera. The
instructions given in this manual and the
Advanced Manual apply to the camera
screens in English. See "Changing the
display language" in Chapter 6 of the
Advanced Manual.

Setting the date and time

It is recommend that you set the date and
time on the camera the first time you use it.

En

See "Setting the date and time" in Chapter
6 of the Advanced Manual. The camera can
be operated without making this setting.

Battery check indicator

The battery check indicator changes according to how much power is
remaining.

ef

Lit (green)

(Disappears after a

while.)

Ready to shoot.

Blinking (red)

Only a little power is
remaining. Have some new
batteries ready or recharge
the batteries.

[BATTERY EMPTY]

is displayed.

No power is left. Replace with
new batteries or recharge the
batteries.

20

TAKING A PICTURE

Compose your picture.

1

AF target mark

Focus on your subject.

2

Shutter button

Position the AF target mark on your

subject using the monitor.

Number of storable still pictures

Press the shutter button halfway and

hold.

En

Green lamp

# mark

The green lamp on the monitor lights

when the focus and exposure are
locked. (focus lock)

The # mark lights when the flash is

about to fire.

21

TAKING A PICTURE

Take the picture.

3

Press the shutter button fully.

The camera takes the picture. The

memory gauge lights while the
picture is stored on the card.

Memory gauge

En

Note

Press the shutter button gently. If it is pressed forcefully, the camera may

move causing the picture to blur.

Recorded pictures are saved in the camera regardless of whether the camera

is turned off or the batteries are replaced or removed.

Never open the card cover, remove the battery, or disconnect the AC adapter

while the memory gauge lights. Doing so could destroy stored pictures and
prevent storage of pictures you have just taken.

When taking pictures against strong backlight, the area of the picture in

shadow may appear colored.

Memory gauge

Every time you press the shutter button, the memory gauge lights
indicating that the picture you have just taken is being recorded. The
memory gauge changes according to how many pictures the camera is
processing. This indicator is not displayed while recording movies.

Shoot Shoot Shoot

a b c d

Before taking

any pictures

(Off)

22

After taking
one picture

(Lit)

After taking

several pictures

(Lit)

Wait

Maximum reached

Wait until the indicator
turns off again before
taking more pictures.

(All lit)

REVIEWING A PICTURE

Press the QUICK VIEW button.

1

QUICK VIEW button

Playback mode is enabled while still

in Shooting mode, and the last
picture taken is displayed.

Press the QUICK VIEW button

again, or press the shutter button
halfway, to return to shooting mode.

Use the arrow pad to display the picture you want.

2

10 pictures back

En

10 pictures forward

Next picturePrevious picture

23

TURNING THE CAMERA OFF

Slide the POWER switch to OFF.

1

POWER switch

En

The monitor turns off.
The lens retracts.

Now that you have mastered how to point and
shoot, refer to the Advanced Manual for
additional camera features and applications.
And to get the most out of your digital images, be
sure to install the OLYMPUS Master software on
the supplied CD-ROM for enhanced editing,
storing, and sharing of your images.

24

Enjoy the camera more

Things you can do with this camera

Using the card...

A high-capacity xD-Picture card will
allow you to take and store many
pictures. By storing the relevant print
reservation data with the images on
the card, you can print pictures at a
photo store or on a PictBridge­compatible printer.

Using the printer...

You can easily print pictures
stored in the camera by
connecting it to the ImageLink
compatible printer.
You can also print using a
PictBridge compatible printer.

En

Using the arrow pad
and

Z

button...

The arrow pad and Z
button are for selecting
and setting menu options
as well as viewing pictures
frame by frame.
As well, you can select
settings such as
PROGRAM AUTO or m
to match your shooting
conditions.

25

Enjoy the camera more

Things you can do with the IMAGELINK PRINTER

Direct Printing from
Digital Camera

Connect the camera directly to the
printer and print pictures on the
camera by issuing instructions
through by following the instructions
on the monitor. No cable required.

En

Printing from PictBridge-compatible digital cameras

The common standard for the camera and the printer is supported by the
software “PictBridge”.The camera and the printer both compatible with
PictBridge are connected by USB cable to print pictures from camera.

Printing from PC

The printer and the PC are
connected by USB cable to
print pictures from PC.

IMAGELINK Print System compatible

For use with OLYMPUS Imagelink Print system ILP-100 IMAGELINK compatible KODAK
Color Cartridge & Photo Paper Kit / PH-40 (40 prints) or PH-80 (80 prints) is available.

26

Enjoy the camera more

Installing OLYMPUS
Master Software

The supplied CD-ROM contains OLYMPUS Master
software for installing and managing image files. Install
it on your computer to enjoy the pictures you have taken. For details,
refer to the online help after installing the OLYMPUS Master software.

Download images from the
camera or other media

Make panoramic images

You can make panoramic images using
pictures taken in panorama mode.

View images and movies

You can enjoy slideshows and
play back sound.

En

Manage images

You can organize your images
using the calendar display.
Search the image you want by
date or keyword.

Edit images

You can rotate images, trim them and
change the size.

Print images

You can print images and make
indexes, calendars and postcards.

User Registration

After installing the OLYMPUS Master software, we recommend that you fill out
the user registration for your camera. By making your registration, you will
receive information on software and firmware updates from Olympus.

27

Specifications

Camera

Product type : Digital camera (for shooting and displaying)
Recording system

Still picture : Digital recording, JPEG (in accordance with Design rule

Applicable
standards

Movie : QuickTime Motion JPEG support
Memory : xD-Picture Card (16 MB - 1 GB)
Image size : 2,592 × 1,944 pixels (SHQ/HQ)

No. of storable pictures
When a 16 MB card

used

En

No. of effective pixels : 5,100,000 pixels
Image pickup device :
Lens : Olympus lens 6.2 mm to 17.4 mm, f3.0 to 5.0

Photometric system : Digital ESP metering
Aperture : f3.0 to f7.1
Shutter speed : 1 to 1/2,000 sec. (NIGHT SCENE mode : 2 sec.)
Shooting range :

Viewfinder : Optical real image viewfinder
Monitor : 1.8" TFT color LCD display, 85,000 pixels
Auto focus : Contrast Detection Method
Outer connector : DC-IN jack, USB connector (mini-B), Printer connector
Automatic calendar system
Operating environment

Temperature : 0°C to 40°C (32°F to 104°F) (operation)/

Humidity : 30% to 90% (operation)/10% to 90% (storage)
Power supply :

Dimensions : 102.5 mm (W) × 55.5 mm (H) × 36.5 mm (D)

Weight : 150 g (0.3 lb.) without battery and card

Design and specifications subject to change without notice.

for Camera File system (DCF))

: Exif 2.2, Digital Print Order Format (DPOF), PRINT Image

Matching III, PictBridge

2,592 × 1,728 pixels (3:2 SHQ/HQ)
1,600 × 1,200 pixels (SQ1)
640 × 480 pixels (SQ2)

: Approx. 4 frames (SHQ : 2,592 × 1,944)

Approx. 4 frames (SHQ : 2,592 × 1,728)
Approx. 12 frames (HQ : 2,592 × 1,944)
Approx. 14 frames (HQ : 2,592 × 1,728)
Approx. 32 frames (SQ1 : 1,600 × 1,200)
Approx. 165 frames (SQ2 : 640 × 480)

1/2.5" CCD solid-state image pickup, 5,360,000 pixels (gross)

(equivalent to 38 mm to 106 mm on a 35 mm camera)

0.5 m (1.6 ft.) to ) (W), 0.9 m (3.0 ft.) to ) (T) (normal)

0.2 m (0.7 ft.) to 0.5 m (1.6 ft.) (W),

0.5 m (1.6 ft.) to 0.9 m (2.9 ft.) (T) (macro mode)

: 2000 up to 2099

-20°C to 60°C (-4°F to 140°F) (storage)

Two AA (R6) alkaline batteries or two NiMH batteries/
One lithium battery pack (CR-V3)/ Olympus AC adapter (optional)

(4.1" × 2.4" × 1.4") excluding protrusions

28

MEMO

Specifications

En

29