This Personal Com put er line is highly mod ular. The diff erent mo dels of this prod uct line, in fact ,
are the result of the combinat ion of two differ ent board versions (ENTRY and ENHANCED),
different CPUs (i486 SX, i486 SX2, i486DX2 and Intel DX4) and two diff er ent cases (T IN BO X and
SLIM TIN BOX). The mode ls of this produc t line are listed in the following table.
CASEMOTHER-
BOARD
TIN BOXENTRYi486SX @ 33 MHzMODULO M4-422KPT44 S33
ENHANCEDi486SX @ 33 MHzMODULO M4-424KPT45 S33
SLIM TIN BOXENTRYi486SX @ 33 MH zMO DULO M4-422 S KPS44 S33
Intel DX4100 MHz33 MHz
Architectur eISA / VESA
Memory RAM: minimum 4 MB, m aximum 64 MB
The mother boar d has two memor y sock et s
arranged in two ba nks ca pable of
accomodat ing the following SIMM s :
EXM 28-004 N
EXM 28-008 N
EXM 28-016 N
EXM 28-032 N
EXM 40-004 * N
EXM 40-008 * N
o
1 1MB x 36 (4 MB) SIMM
o
1 2MB x 36 (8 MB) SIMM
o
1 4MB x 36 (16 MB) SIMM
o
1 8MB x 36 (32 MB) SIMM
o
1 1MB x 32 (4 MB) SIMM
o
1 2 MB x 32 (8 MB) SIMM
* SIMMs without parity
8 MB, 16 MB, 32 MB or 64 MB ba nks can
be obtained. Th e syst em sup por ts mixed
configur atio ns.
Memory access70 ns
Cache-!
st
level cache:
8 KB integrated in th e process or
-Secondary level cache:
128 KB or 256 KB capacity
Floppy DisksPanasonic JU 257 A1.44 MB
Sony MP-F17 W1.44 MB
Sony MPF420-11.44 MB
Mitsubishi MF 3551.44 MB
EPSON SMD 1040 -41 81.44 MB
Mitsumi D359T31.44 MB
TEAC FD235HF1.44 MB
Y-E DATA YD-702B / Y-E DATA
YD-702D1.44 MB
Toshiba ND08 DE1.2 MB
Panasonic JU 475- 3 / JU 475- 4
JU 475-51.2 MB
Hard Disks170 MBCONNER CFA 170 A
170 MBQUANTUM LPS 170 AT
210 MBCONNER CFS 210 A
210 MBW.D. AC1210F
210 MBSeagate ST 3250 A
340 MBQUANTUM LPS 340 AT
340 MBW.D. AC 2340
340 MBCONNER CFA 340 A
420 MBW.D. AC 2420 F
420 MBSeagate ST 3491 A
420 MBCONNER CFS 420 A
540 MBCONNER CFA 540 A
1 GBMICROPOLIS 4110A
CASE
SLIM BOX
EUT9A
MOTHERBOARD
ENTRY
BA2109
BA2148 (Italy)
BA2135 (derived)
BA2142 (derived)
ENHANCED
BA2110 (Italy)
BA2114 (S ingapo re)
BA2133 (Italy)
BA2132 (S ingapo re)
EXPANSION BUS
TIN BOXIN2024
SLIM BOXIN2025
POWER SUPPLY
TIN BOX Case
ASTEC SA201 3450
200 W, 120 - 240 V
SLIM BOX Case
ASTEC SA100 3430
100 W, 120 - 240 V
Continues
4-2M4-4x4 / M4-4x 4S / M4-4x2 / M4-4x 2S / PCS42P
Page 3
Streaming TapesIrwin 31250A 80/120 MBFloppy inter face
Wangtek 5159ES 150 MB SCSI interface
Wangtek 5525ES - 5525ES-ACA 320 M B
SCSI interface
CONNER 2525 320 MB SCSI int er face.
STUs with SCSI interface requir e the ASC-2
or ASC-2F controller.
Slots on systems w ith
TIN BOX case
-Expansion slots on the CARD RISER
bus expansion board:
- Two ISA AT / VESA Full Size slots
- Two ISA AT Full Size slots
- One ISA AT Half Size slot
-Expansion slots on the motherbo ard :
One AT slot in which the audio
subsystem boa rd is installed.
Slots on systems w ith
SLIM TIN BOX case
-Expansion slots on the CARD RISER
bus expansion board:
- Two ISA AT / VESA Full Size slots
- One ISA AT Half Size slot
-Expansion slots on the motherbo ard :
One AT slot in which the audio
subsystem boa rd is installed.
Video contoller ENTRY version motherboard
CIRRUS 5424 integrated video controller
with 512 KB of video RAM expandab le to
1 MB.
ENHANCED version mother boar d
CIRRUS 5428 integrated video con troller
with 1 MB of video RAM expandable to
2 MB.
Audio subsystemThe following boards can be installed in the
motherboa rd’s AT slot .
-MOZART AUDIO BOARD
-MPC MOZART AUDIO BOARD
-MODEM/FAX/AUDIO (MI 2047) BOARD
HDU and FDU
controllers
ENTRY version motherboard
SMC37C651 compo nent
Floppy controller and har d disk interf ac e for
AT IDE HDUs.
ENHANCED version mother boar d
-SMC37C655 component
Floppy controlle r and hard disk inte rface
for AT IDE HDUs.
-82C611 component
Hard disk interfac e for Local bus I D E
VESA HDUs.
MousePS/2- and AT-compatible
Keyboard101/102-key ANK 27-10 1/ N, ANK 27-102 /N
Compact keyboard
101/102-key ANK 28-101, ANK 28-102
Super compact keyboard
BIOS
The ROM BIOS is a
Flash EPROM. The
BIO S c o d e is p ro v ided
on diskettes an d mu st
be copied into Flash
EPROM.
Last le vel:
Rev. 1. 11
4
M4-4x4 / M4-4x4S / M4-4x2 / M4-4x2S / PCS42P4-3
Page 4
MOTHERBOARD
LEVELD.R.S.
Nasc.
BA2109
Lev. 01
Nasc.
Lev. 01
BA2148
CODE
ROM BIO SNOTES
The ROM BIOS
is a Flash
EPROM. The
ENTRY version moth erb oar d.
The follow ing ta ble lists the co mp onen ts on this
board.
BIOS code is
provid ed on
disket t es and
This board has been r eplace d by the boa rds
described in this sect ion.
must be copied
into Flash
EPROM.
Componen t 82C493 Ver . AH at location U 10 4 has
been replaced by 82C493 Ver . BH.
The 0 Ohm resis to r at location R112 1 has be en
removed. These modifications correct the fault with
the DMA FIFO in the AH versio n of com pone nt
82C493.
Since this board is no longer being produc ed,
this modification has effect at field level only.
ENTRY version mo th erb oar d ma nuf act ured in Italy.
Componen t 82C493 Ver . AH at location U 10 4 has
been replaced by 82C493 Ver . BH
The 0 Ohm resis to r at location R112 1 has be en
removed. These modifications correct the fault with
the DMA FIFO in the AH versio n of com pone nt
82C493.
Lev. 02
Lev. 03
Lev. 04
BA2135
BA2142
New printed cir cuit that implement s the
modifications made to the HARDWARE RESET
and FLASH EPROM.
Modification t o the pr in ted circu it which ch ange s to
LEVEL 01.
This modifica tion was necessar y to in cor por ate th e
corrections to the problem con cerning t he
SHUTDOWN 286.
Feature connector installed on the ENTRY version
motherboard.
560327 EThis board derived f ro m BA2148 and inclu des the
same modification s.
560327 EThis board derived f ro m BA2148 and inclu des the
same modification s.
4-4M4-4x4 / M4-4x 4S / M4-4x2 / M4-4x 2S / PCS42P
Page 5
LEVELD.R.S.
CODE
Nasc.
ROM BIOSNOTES
ENHANCED version motherboa rd manu fa ct ure d in
Italy.
Lev. 01
BA2110
Lev. 02
Lev. 03
Nasc.
Lev. 01
BA2114
Lev. 02
To correct the problem with the video’s vertical
sync and to incorporate some of the cuts and
wirings made, a new printe d circu it is used wh ich
includes resistors to eliminat e some jumper s.
4
Component 82C4 93 Ver . AH at location U104 has
been replaced by 82C493 Ver. BH.
The 0 Ohm resistor at locat ion R1121 has been
removed. These m odif icat ions co rec t the fault w ith
the DMA FIFO in the AH version of comp onen t
82C493.
Since this board is no longer being produce d,
this modification has effect at field level only.
To improve the pa rallel in te rface ’s fun ctio nal
margins, compon ent 74ALS2 45 is adde d to delay
the IOW signal connect ed to the SM C37C66 5 I/O
controller.
ENHANCED version motherboa rd manu fa ct ure d in
Singapore.
To correct the problem with the video’s vertical
sync and to incorporate some of the cuts and
wirings made, a new printe d circu it is used wh ich
includes resistors to eliminat e some jumper s.
Component 82C4 93 Ver . AH at location U104 has
been replaced by 82C493 Ver. BH.
The 0 Ohm resistor at locat ion R1121 has been
removed. These m odif icat ions co rrect th e fault wi t h
the DMA FIFO in the AH version of comp onen t
82C493.
Since this board is no longer being produce d,
this modification has effect at field level only.
Lev. 03
To improve the pa rallel in te rface ’s fun ctio nal
margins, compon ent 74ALS2 45 is adde d to delay
the IOW signal connect ed to the SM C37C66 5 I/O
controller.
M4-4x4 / M4-4x4S / M4-4x2 / M4-4x2S / PCS42P4-5
Page 6
LEVELD.R.S
Nasc.
Lev. 01
BA2133
Lev. 02
Lev. 03
ROM BIO SNOTES
CODE
560360 TENTRY version motherb oar d ma nuf act ur ed in I ta ly .
Componen t 82C493 Ver . AH at location U 10 4 has
been replaced by 82C493 Ver . BH.
The 0 Ohm resis to r at location R112 1 has be en
removed. These modifications correct the fault with
the DMA FIFO in the AH versio n of com pone nt
82C493.
New printed cir cuit that implement s the
modifications made to the HARDWARE RESET
and FLASH EPROM.
Modification t o the pr in ted circu it which ch ange s to
LEVEL 01.
This modifica tion was necessar y to in cor por ate th e
corrections to the problem con cerning t he
SHUTDOWN 286.
Lev. 04
Nasc.
Lev. 01
BA2132
Lev. 02
Lev. 03
To improve the para llel interfac e’s fu nct ional
margins, compo nent 74AL S245 is add ed to delay
the IOW signal connect ed to the SMC37C6 65 I /O
contro ller .
560360 TENHANCED version motherboard manufactured in
Singapore.
Componen t 82C493 Ver . AH at location U 10 4 has
been replaced by 82C493 Ver . BH.
The 0 Ohm resis to r at location R112 1 has be en
removed. These modifications correct the fault with
the DMA FIFO in the AH versio n of com pone nt
82C493.
New printed circuit which includes the following
modifications made to BA2133:
-HARDWARE RESET
-FLASH EPROM
-SHUTDOWN 286
To improve the para llel interfac e’s fu nct ional
margins, compo nent 74AL S245 is add ed to delay
the IOW signal connect ed to the SMC37C6 65 I /O
contro ller .
4-6M4-4x4 / M4-4x 4S / M4-4x2 / M4-4x 2S / PCS42P
Page 7
MOTHERBOARD INTEGRATED CO NTROL LERS
MOTHER-
INTEGRATED CONTROLL E RS
BOARD
ENTRYIntel OverDr ive Ready Socket 3 : This socket can hos t the following
82C491Chip Set component integr at ing the f o llow ing fu nctions:
-System processor support
-VESA local bus control
-AT bus control
-Interface between the proces sor and coprocessor
- Secondary level cache control
-System memory refresh control
-System memory control
-Chip select the keyboar d contr ol ler and Real Time Clock
-DMA control
-Interrupt control
-Real Time Clock
-CMOS RAM powered by a lithium batter y
82C493Chip Set component integr at ing the f o llow ing fu nctions:
-Support for the arbitrat ion logic of the VESA local bus
-Three 74F138 multiplexers
-One 74F138 decoder
-AND, OR, NAND, INVERTER gates
Socket for the Secondary Level Cache M odu le
The secondary level cach e mo dule can have a 128 KB or 256 KB capacit y.
28F001BX1 MB BIOS Flash EPRO M
8042Keyboard an d mouse co nt roller
SMC 37C651 ENTRY version motherb oard Super I/O con troller. This controller
has the fo llo w ing functions:
-Floppy disk control
-Interface for two serial por ts
-Interface for a parallel port
-Interface for intelligent AT IDE hard disks
ICD2023Clock generator
CL-GD5424 Video controller supporting from 512 KB to 1 MB of video RAM
74HC393Speake r controller
ENHANCEDThe differences of this mot her boa rd with res pect to the ENTRY ver sion ar e the
following:
SMC 37C655 I/O controller for the ENHANCED version mother boa rd - This
controller has the following f unct ions :
-Floppy disk control
-Interface for two serial por ts
-Interface for a multi-mode parallel port
-Interface for intelligent AT IDE hard disks
82C611Hard disk controller for Fast Local BUS IDE VESA HDUs
CL-GD5428 Video controller supporting from 1 MB to 2 MB of video RAM.
4
M4-4x4 / M4-4x4S / M4-4x2 / M4-4x2S / PCS42P4-7
Page 8
AUDIO BOAR D
BOARDLEVELNOT E S
Mozart Audio
Nasc.Audio board.
Board
MPC Mozart
Nasc.Audio board with joystick inte rface .
Audio Board
Audio /
Nasc.
Modem / Fax
Board
(MI2047)
Lev. 01To avoid the chance s of noise dist ur banc e, the modem /fax
connectors on the DAA boar d have been r eplace d.
USER DISKETTE
LEVELNOTES
Rev. 1. 01
This version require s BIOS 1. 09 at least.
Rev. 1. 05
upd 1
This version require s BIOS 1. 10 at least.
In this update modifica tion s were made to the following tests:
-CPU tests ( PIC test and Cache test)
-Memory test
-Hard disk test so that hard disks with more tha n 2048 cylinder s can be teste d
-Floppy disk test
-Keyboard test
-Parallel port test
-Mouse te st
SYSTEM TEST
LEVELNOTES
Rev. 1. 03
Rev. 1. 07
upd 1
This version require s BIOS 1. 09 at least.
This version require s BIOS 1. 10 at least.
In this update modifica tion s were made to the following tests:
-CPU tests ( PIC test and Cache test)
-Memory test
-Hard disk test so that hard disks with more tha n 2048 cylinder s can be teste d
-Floppy disk test
-Keyboard test
-Parallel port test
-Mouse te st
-CPU operation in Protected Mode t est
-The serial port RTS to RI test is added
4-8M4-4x4 / M4-4x 4S / M4-4x2 / M4-4x 2S / PCS42P
Page 9
POWER SUPPLY
POWER SUPPLYLEVELDESCRIPTION
ASTEC SA201 - 3450
Nasc
200 W power supply f or TIN BO X case s.
D.R.S. CODE: 5880 68 F
Lev. 01
To reduce EMI nois e, the BEAD PN 35052B ferr ite is
installed on the center pin of mosfet Q1, and diod e D2 is
removed.
ASTEC SA100 - 3430
D.R.S. CODE: 5603 61 Q
Lev. 02
Lev. 03
Lev. 04
Nasc.
Lev. 01
To :
-comply with ENERGY STAR (EPA) requirem ent s, and
-ensure that power supply powe rs off cor rec tly
the modificat ions wer e made:
-Components D8 - Q4 - R46 - C9 were added
to the already preset pr inte d circu it.
-A 33 K 1/6 W resistor was added to the primary of the
primary of the power supply .
A new supplier for the 2.2 00 uF- 16V C23 capac itor is
used. Besides NCC, also RUBI CO N w ill now supply this
component.
-The layout of the Power Goo d boar d is optimize d
so that capacit ors C125 and C126, pre viously vo latile,
can now be installed on the pr int ed circ uit.
-Renewed motherboar d prin ted circu it so that the R62
and Z5 components can be added.
-New alternative suppliers for the following com po nent s:
C1 - C2 (ISKRA and RIFA) - C12 (EVOX and
ARCOTRONICS) - T1 (EDT39).
Some power su pply com po nent s wer e remo ved t o cut
produ ct io n cost s.
100 W power supply f or SLIM BOX cases .
Modification m ade to t he fan re gulat ion circ uit. Fr om a
High Speed model, the fa n now becom es a Medium
Speed model.
This modificat ion was implement ed to corr ect the pro blem s
with the systems supplied t o MERCEDES.
4
Lev. 02
To correct:
-Excessive ripple on the +12 V
-Low power supply yield
-Power Good problems
the following modificat io ns were ma de:
-The SGS THOMSON altern at iv e for the IC3 reg ulat or
was eliminated
-Zener Z102 was changed from HZ11C2 to HZ11C3
-Capacitor C64 was changed from 470 pF to 2,200 pF
This level does not include the mo difica tion s made in level
01 (specific for MERCEDES).
Lev. 03
Modified fan circ uitr y to include t he leve l 01 modificat ions
on all the power supplies.
M4-4x4 / M4-4x4S / M4-4x2 / M4-4x2S / PCS42P4-9
Page 10
DRIVERNOTES
EVD Driver Ver. 1.01
EVD Driver Ver. 1.02
BIOS
LEVELNOTES
Rev. 1. 09
Rev. 1. 10
This BIOS version inclu des the f ollowing m odif icat ions:
-New multilingual Setup Utilities
-LAN board failures are corrected
-32-bit transfer rate failures ar e cor rec te d
Rev. 1. 11
This BIOS version correct s the pr oblem s wit h the SEAG ATE har d disk fai lures .
BUS EXPANSION BOARD
NAMELEVELD.R.S.
NOTES
Code
IN2024Nasc588758 P For TIN BOX cases
IN2025Nasc
Lev. 01
588759 Q For SL IM TIN BO X cases
New printed circuit which allows the cor re ct routing of
cables to the magnetic periph era ls.
SOFTWARE COMPAT IBILI TY
OPERATING SYSTEMS
DR-DOS, Version 7.00 **1
IBM PC-DOS 5. 0
IBM PC-DOS, Version 6.1
IBM OS/2 EXTENDED EDITION, Version 1.30 **2
IBM OS/2, Version 2. 0 **3
MS-DOS, Ver sion 5.0
MS-DOS, Version 6. 00
**1 The IDE Block mode in the BIOS Set up
program must be disabled before using
the Fdisk com m and.
**2 Systems using the DX4 and DX2/6 6
processor ma y crash at boot st ra p
**3 The EVD Cirrus 5428 dr iver s ver. 1.02
are installed on the M4- 4x4 / M4-4x 4S /
PCS42P Enhanced models. Non-blitter
16-c o lor drives ar e n ot inst a l led.
WINDOWING APPLICATION
ALDUS PAGEMAKER, Version 5.0
AMI PRO for WI NDO WS, Version 2.0
COREL DRAW for Windows , Version 4. 0
DESQVIEW /386, Version 2. 62
LOTUS 1-2-3 for WINDOW S, Ver sion 4.01
LOTUS FREELANCE for Windows, Version 2.0
MS WINDOW S, Versio n 3.0
MS WORD FOR WI NDO WS, Ver sion 2.0
MS WORD FOR WI NDO WS Ve rsion 6.0
MS WORKS for WINDO W S, Version 3.0
MS POWERPO INT , Version 3.00
WORDPERFECT for WINDOWS, Version 5.1
LOTUS AMI PRO for OS/2, Version 3.0
ARTS & LETTERS, Version 3.1
DISPLAYWRITE 4 fo r DOS, Version 1.5
DISPLAYWRITE 5/ 2 for OS/ 2, Version 1.0
MS-WORD for DO S, Versio n 6.0
ALDUS PAGEMAKER, Version 4.0
ALDUS PAGEMAKER for OS/2, Version 3.0
GEM/3 DESKTOP PUBLI SHER, Ver sion 2.0
VENTURA PUBLISHER DOS/GEM Edit ion,
Version 3.0
MS-WORD for OS/ 2, Versio n 5.5
WORD PERFECT for DOS, Vers ion 6.0a
WORD PERFECT for OS/2, Versio n 5.1
WORDSTAR, Vers ion 7. 0
GRAPHICS PRODUCTS
AUTOCAD, Version 11
AUTOCAD for DOS, Version 12. 0
AUTOCAD for WINDOW S, Version 12 .0
AUTODESK 3D STUDIO, Vers ion 3.0
LOTUS FREELANCE PLUS, Version 4.0
MICROGRAFX DESIG NER Ver sion 3.1
MS CHART, Version 3.00 **
PC PAINTBRUSH V PLUS, Version 1.0
CHARISMA, Version 2.1
DR. HALO IV, Ver sion 1. 0
HARVARD GRAPHICS, Version 3.0
LOTUS FREELANCE for OS/2, Version 2.0
** The EVD Cirrus 54 28 driv ers ver. 1.02
are instal led on t he M4-4x4 / M4-4x4S /
PCS42P Enhanced models. Non-bl itter
16-color drive s are not installed .
HARDWARE COMPATIBIL ITY
MODEMS PRODUCTSGRAPHICS PRODUCTS
HAYES SMARTMODEM, 2400 B
INTEL SatiFAXtion Modem / 200
INTEL SatiFAXtion Modem / 400
DIGICOM MODEM FAX Mod. SNM41PC
INFOTRONIC XGC
NUMBER NINE GXi
MATROX HIPER VGA CA D
MATROX MGA IMPRESSI ON 3Z/ A
ROBOTI CS World Port 1200
INTELLIGENT MULTIPORT PRODUCTSDISPLAY PRODUCTS
CHASE AT 16+ Serial I/O Control ler
DIGIBOARD MULTIPORT PC/8
SPECIALIX SI/8
IBM PS/2 COLOR DISPL AY 8518
SONY CPD-1730
SONY GDM-2038
MOUSE PRODUCTSCONTROLLER DEVICES
IBM PS/2 MOUSE
LOGITECH MOUSEMAN BUS MOUSE
LOGITECH MOUSEMAN RADIO MOUSE
MS BALL POINTER MOUSE
MS BUS MOUSE
MS PS2 SERIAL MOUSE
ADAPTEC 1540C SCSI HOST ADAPTER
ADAPTEC 1540CF SCSI HOST ADAPTER
ADAPTEC 1542B SCSI HOST ADAPTER
HORNET VL-BUS IDE CACHING & MULTI I/O
VL-230
SONY COR-334 KIT
SONY OPA-474 KIT
MINISCSI PLUS-HIGH PERFOMANCE
PARALLEL TO SCSI ADAPTER
MPC BOARDSCD-ROM
LOGITECH AUDIOMA N
PRO AUDIO SPECTRUM 16 -SDLC
PRO AUDIO SPECTRUM PAS2
PRO AUDIO SPECTRUM 16 PL US CARD
SONY CD ROM DRIVER, CDU 33A
SONY CD ROM DRIVER, CDU 541
SONY CD ROM DRIVER, CDU 561
SONY CD ROM DRIVER, CDU 7305
SOUND BLASTER PRO
SOUND BLASTER 16 APS
4
M4-4x4 / M4-4x4S / M4-4x2 / M4-4x2S / PCS42P4-11
Page 12
NETWORK and LAN PRODUCT SO FTW AR E
BANYAN VINES Version 5.53
DEC PATHWORKS FOR OS/ 2, Version 2.0
IBM PC LAN PROGRAM, Version 1.30
IBM PC LAN SUPPORT PROGRAM, Ver. 1.2
IBM OS/2 LAN SERVER, Version 3.0
MICROSO FT LAN MAN for OS/ 2, Ver. 2. 1
NETWORK and LAN PRODUCTHARDW ARE ISA
COM ETHERLINK 16 ADAPTER (3C507)
COM ETHERLINK II ADAPTER (3C503)
COM ETHERLINK PLUS ADAPTER (3C505)
COM ETHERLINK ADAPTER (3C501)
COM ETHERLINK I II ADAPTER (3 C509)
COM TOKENLINK PLUS ADAPTER (3C603)
COM TOKENLINK I II 16/ 4 ( 3C619 )
DEC ETHERWORKS TURBO TP ADAPTER
DC ETHERWORKS TURBO ADAPTER DE200
D-LINK DT-220 ADAPTER
NOVELL NE2000 ETHERNET ADAPTER
ETHERNET SCHNEIDER & KOCH SK-net g16 TP
IBM TOKEN RING 16/4 ADAPTER
IBM TOKEN RING 16/4 ADAPTER II
IBM TOKEN RING PC ADAPTER II
INTEL ETHER EXPRESS 16 ETHERNET
ADAPTER (EPCLA8120)
INTEL TOKEN EXPRESS ISA 16S TOKE N
RING ADAPTER
MADGE AT RING NO DE ADAPTE R
NOVELL NE1000 LAN ADAPTER
NETWORK and LAN PRODUCT HARDWARE VESA
ACCTON 32-BIT ETHERCOM BO ADAPTER
MULTIMEDIA ENVIRONM ENT SOFT WARE
MULTIMEDI A TO OLBOOK, Versio n 1.53
AUTHOWARE STAR, Ver sion 1. 0A
IM-AGE Version 3. 0
MPC SAMPLER
MS VIDEO for Windows, Ver sion 1.0
MS WINDOWS SOUND SYSTEM, Version 1.0
MS WINDOWS SOUND SYSTEM, Version 2.0
POTO STYLER, Version 1.1
MULTIMEDIA ENVIRONM ENT HARDW ARE
ACTIONMEDIA II CAPTURE MODULE ** 1
INTEL SMART VIDEO RECORDER
SCREEN MACHINE (ISA) Mod 1
SUPER VIDEO Windows & Super Motion Compres sion CM Ver. 1.3B (I SA) **2
VIDEO BLASTER **2
VIDEOLOGIC DVA 4000 /ISA **2
WIN/TV **2
**1 In order to work prope rly t he boa rd requir es
the feature co nnec tor which is not presen t
on Entry M4-4x2 / M4-4x 2S / PCS42P
systems. It is present on all ot her models.
If the EMM386 drive r is insta lled w ith the
NOEMS opt ion as request ed by the
bundled software program, the ActionMedia
board will not work correct ly. Rem ove the
EMM386 driver.
**2 In order to work prope rly t he boa rd requir es
the feature co nnec tor which is not presen t
on Entry M4-4x2 / M4-4x 2S / PCS42P
systems. It is present on all ot her models.
ACOUSTIC DEVIC EVIDEO DEVICE
SRS 170 ACTIVE SPEAKER SYSTEM
SONY SRS 77G ACTIVE SPEAKERS SYSTEM
PIONEER LASER DISC CLD-V2300D
PIONEER LASER DISC V4300D
SONY LASER DISC PLAYER LDP3600
Position 1-2Disables mouse interru pt 12
Position 2-3Enables mouse interrupt 12 (De fault)
Jumper J21 & J25 - Enable/ disa bl e boot st rap from the ser i al port s
Position 1-2Disables bootstrap f rom the se rial por ts
Position 2-3Enables bootstrap from the serial port s (Defa u lt)
Jumper J26 - Enabl e/di sab le floppy dis k write protect
Position 1-2Enables floppy disk write protectio n
Position 2-3Disables floppy disk write protec tion (Default )
Jumper J45 - Enabl e/ disab le on-b oar d video c o ntr ol ler
Position 1-2Disables the on-boa rd vide o contr ol ler
Position 2-3Enables the on-board video con troller ( Def ault )
Jumper J47 - Type of process or inst al l ed in the syst em
Position INDX, DX2 or DX4 proc esso r
Position OUTSX or SX2 processor
Jumper J48 - Enabl e/di sab le access to co nfigu rat ion ut ili ties via keybo ard
Position 1-2Disables acc ess to con figu ration ut i lities via ke yboa rd
Position 2-3Enables access to configuration util ities via keyboa rd (Def ault )
Jumper J56 - Select paral lel por t DMA chann el
Position 1-2DMA channel DRQ1 is used
Position 2-3DMA channel DRQ3 is used (Default)
Jumper J57 - Select pa rall el por t DMA ackno wle dge ch anne l
Jumper J58 - Select paral lel por t interr upt channel
Position 1-2DMA channel DACK1 is used
Position 2-3DMA channel DACK3 is used (Default )
Position 1-2Interrupt channel IRQ5 is used
Position 2-3Interrupt channel IRQ7 is used (Def au lt)
Jumper J67 - Flash EPRO M write en abl e
Position 1-2Enables flash EPROM writes
Position 2-3Disables flash EPRO M write s (Defau lt)
NOTE:Alwa ys in position 2- 3 in case of an EPROM
Connector J95 - Select CPU voltage (3.45 V / 5 V)
The following figure shows the loca tion of this con nect or .
To select a voltage of 3.45 V, install an adapt er board in place of the 5 V jumpered co nnec to r. See
the following figure.
Jumper J96 - Enabl e/ di sabl e IDE AT / ISA inter fa ce
(for SOLE ENHANCED boards only)
Position 1-2Enables the IDE AT ISA interface
Position 2-3Disables the IDE AT ISA interface - The VESA interface is available for local
bus hard disk driv es.
Jumper s J50 & J49 - System proc esso r clock
JUMPER J50JUMPER J49PRO CESSO R CLO CK
ININ25 MHz
OUTIN33 MHz
INOUT40 MHz
Jumper J79 - VL BUS (VESA local bus) clock
JUMPER J79CPU CLOCK (ID3)VL BUS CLOCK
Position 1-2Greater than 33 MH z50 MHz
Position 2-3Greater than 33 MH z40 MHz
Position 1-2Less than or equal to 33 MHz33 MHz
Position 2-3Less than or equal to 33 MHz25 MHz
Never chang e the posit ion of this jumpe r.
INTERRUPT LEVELS
4
LEVELNAMECONTROLLER FUNCTION
1IRQ01Channel 0 timer OU T
2IRQ11Keyboard
3 to 10 *IRQ21Interrupt issued from contr oller 2 to con troller 1
3IRQ82Real time clock
4IRQ92Free
5IRQ102Free
6IRQ112Free
7IRQ122Mouse
8IRQ132Coprocessor
9IRQ142Hard disk controller
10IRQ152Free
11IRQ31Serial port 1
12IRQ41Serial port 2
13IRQ51Parallel port 2
14IRQ61Floppy disk controller
15IRQ71Parallel port 1
* The priority level depe nds on the inter ru pt select ed. For example, if int errup t IRQ 11 is selec te d
the priority leve l is 6, or if interru pt IRQ1 5 is selected t he pr iorit y level is 10.
M4-4x4 / M4-4x4S / M4-4x2 / M4-4x2S / PCS42P4-15
Page 16
DMA CHANNELS
CHANNELNUMBER OF BITSFUNCTION
0
1
2
3
4
5
6
7
8 or 16
8 or 16
8 or 16
8 or 16
16
16
16
16
Reserved f or the audio sub syst em (if pre sent )
Reserved f or the audio sub syst em (if pre sent )
Floppy disk transf er s
IDE hard disks (if DMA mode is select ed )
Used for the cascad e conn ect ion of DMA1
Free
Free
Local bus VESA IDE hard disk con troller
I/O ADDRESS MAP
ADDRESSFUNCTIONADDRESSFUNCTION
0000 - 000F hDMA contro ller00F0 hReset for numeric error
0020 - 0021 hInterrupt controller0170 - 0177 hSecondary IDE channel
0040 - 0043 hTimer 101F0 - 01F7 hPrimary IDE channel
0048 - 004B hTim er 20278 - 027B hParallel port 2
0060 hKeyboard data controller02F8 - 02FF hMotherboar d serial port 2
0061 hNMI, speaker control ler0376 hSecondary IDE channel
command s por t
0064 hKeyboard commands
controller
0377 hSecondary IDE channe l
status port
0070 h (bit 7)NMI enable0378 - 037F hParallel port 1
0070 h (bit 6:0)RTC addresses03BC - 03BF hParallel port 3
0071 hRTC data 03E8 - 03EF hSeria l port 3
0073 hReserved - board
03F0 - 03F5 hFloppy channel 1
configuration
0075 hReserved - board
configuration
03F6 hPrimary IDE channel
command s por t
0078 hBIOS timer03F7 h (scrittura) Floppy channel 1 comm ands
0080 - 008F hDMA page register03F7 h (bit 7)Floppy channel 1 exchange
00A0 - 00A1 hInterrupt con troller 203F7 h (bit 6:0)Primary IDE channel status
port
00C0 - 00DE hDMA controller 203F8 - 03FF hMotherboar d serial port 1