Following pr oblem solved: the system f ai ls to
switch on if the print er conne cted is switc hed on
befor e the syst em . Occu rs espec ia lly on print er s
shared wi t h ot her syst em s . A zen er diode and
resistor have been adde d to the fan drive circuit to
improve the power sup ply’s immu nity to exte rna l
voltages
The box and lid have be en cha nged
Improved RESET signal
Noise reduce d
Temperat ur e prob le ms solved
Noise with MITSUBISHI fans reduce d
Extended magnetic peripheral cables
Changed pcb mat er ials t o impro ve t ra nspo rtab ilit y
This power supply has ev olved in t he sam e way as
the 220 V model
22-4M290-30
Page 5
MOUSE
CONNECTOR
KEYBOARD
CONNECTOR
BUS BOARD
CONNECTORS
Personal Com puter - Pocket Service G uide
COMPONENTS AND JUMPERS ON THE MO THERBO AR D
VIDEO
CONNECTOR
80286
PARALLEL
CONNECTOR
WD90C11
CHIP SET
CHIP SET
SERIAL
CONNECTOR
PC87310
P1
8742
BIOS
BANK A
BANK 2
BANK 1
FGC2A
This Persona l Comp ut er has a jumper (P1) used t o disable the passwo rd ; all settin gs can be made
via User Diskette or BUILT-I N- SETUP or EXTENDED SET UP progr ams which are de scribed in the
following pages.
M290-3 022-5
22
Page 6
Personal Comp ut er - Pock et Se rv ice G uide
BUILT IN SETUP PROGRAM
When changing sy stem conf igur ation, or when installing t he sys te m for the f irst time , a
BUILT IN SETUP screen wi ll appear aut om atically at the end of Power On Diagno stic s. This
program is stored in RO M BIOS and allows the user to chang e some PC configu ra tion param eter s.
Exit
Select
SPACE
Confirm
CR
Restart
BS
Drive
TAB
Messages
Press
To change config ur atio n par amet er s: pr ess the fun ctio n key which corre spon ds to the par am et er t o
be changed (the func tion keys are indica te d in the me nu that appe ar s on the scr ee n). Th er e are
fields in which to insert values. Press space until the correc t value appe ars. The follow ing par ameters can be changed:
F1Changes hour, minutes and seconds
F2Changes day, month an d year
F3Changes hard disk type. When the re are two hard disks, two fields are pres ent .
To move from one field to anot her , pr ess the TAB ke y. The fo llow ing ta ble lists the
hard disks that can be inst al led in the system :
TYPEMODELCAPACITYCYLTSETINT
02
05
Quantum LPS 53 AT
CONNER CP3046
W.D. AC 140
W.D. AC 2120
CONNER CP30126
40 MB
40 MB
40 MB
120 MB
120 NB
1219
1219
1219
1524
1524
2
2
2
4
4
512
512
512
512
512
1
1
1
1
1
Where: CYL: No. of disk cylinde rs T:No. of disk he ads
SET: No. of disk sec to rs INT:Int er leave factor.
F4 Changes floppy disk type . When there are two floppy disks, two fields are pres ent .
To move from one field to anot her , pr ess the TAB ke y
F5Changes video format at system powe r on
Another four icons are displa yed f or user information only:
Indicates that memory size has been change d
22-6M290-30
Page 7
Personal Com puter - Pocket Service G uide
Indicates that a coprocess or is installed
Indicates that system bat teries are low
Indicates a real time clock fa ilure
EXTENDED SETUP PROGRAM
Extended SETUP pro gram menu includ es all BUILT IN SETUP program func tion s, and icons that
identify advanc ed f unct ions . To change th ese pa ram et ers, after selec ting the funct ion, press the
space bar.
The progr am ca n be recalled at any time by pres sing t he SHI FT, CTRL, ALT, DEL keys simultan eously.
EXTENDED SETUP
Exit
The follow ing par am et ers ca n be cha nged :
F1 Changes hour, minu te s and second s
F2 Changes day, month and year
F3 Changes hard disk type and hard disk he ads in landing zone.
To move fro m one fie ld to anot her , pre ss the TAB key
F4Changes floppy disk type. When ther e are two hard disks, two fields are prese nt .
To move fro m one fie ld to anot her , pre ss the TAB key
F5Changes video format at system power on
M290-3 022-7
Select
When there are two hard disks, two fields are present.
Confirm
CR
Restart
Messages
Press
22
Page 8
Personal Comp ut er - Pock et Se rv ice G uide
F6Memory - There are 3 fields that indicate respect ively:
- Memory portion de dicat ed t o shadow RAM
- Duration of the PO D me m ory te st
- Extended and expan ded mem o ry sizes
To move from one field to anot her , pr ess the TAB ke y
F7System speed. A field allowing to select the speed at whic h data is exchange d between
memor y and CPU; anot he r field allows to select th e speed at wh ich data exc hang eed
between CPU and per ipher als. To move from one field to anothe r, press the TAB key
F8Selects 3 fields that allow the following paramet ers to be change d:
- Character repeat speed
- Buzzer volum e
- Parallel port operat ion m ode se tting (The par al lel port is not bidire ctio nal; it can be set in
either Input or Output)
F9 Stores a system or network passwor d
F10 Selects country keyboa rd
I/O ADDRESS MAP
ADDRESSFUNCTIONADDRESSFUNCTION
000-01F
020-021 F
040-043
060
061
064
070-071
080-08F
0A0-0A1
0C0-0DF
0EC-0ED
0F9 and 0FB
DMA contro ller
Interrupt controller 1
Timer
Data keyboard controller
Control port B
Comands keyboard controller
RTC, NMI regist er s and
CMOS RAM
DMA page regist er
Interrupt controller 2
DMA channe ls 4-7
TOPCAT chip set
TOPCAT chip set
VGA controller
Parallel port 2
Serial port 2
Parallel port 1
Video ada pt er
Video ada pt er
Video ada pt er
Video ada pt er
Video ada pt er
Floppy disk controller
Serial port 1
VGA control registers
Timer
Keyboard controller
Interrupt from interrupt controller 2
Serial port 2
Serial port 1
Parallel port 2
Floppy disk controller
Parallel port 1
RTC
Available
Available
Available
Mouse
80287
Hard disk contro ller
Available
DMA CHANNELS
CHANNELFUNCTION
DMA0
DMA1
DMA2
DMA3
DMA4
DMA5
DMA6
DMA7
8-BIT
8-BIT
8-BIT
8-BIT
16-BI T
16-BI T
16-BI T
16-BI T
Page 9
Personal Com puter - Pocket Service G uide
SOFTWARE COMPAT IBILITY
OPERATING SYSTEMSNOTES
IBM DISK Operating Syst em , Ve r. 3. 30
IBM DISK Operating Syst em , Ve r. 4. 01
IBM Operat ing Syst em /2, Ver . 1.1 0 and 1.20
During installation on ha rd disk, a
formatted DSDD disk is requir ed.
PS/2 mouse not recognised
IBM Operat ing Syst em /2 Ext en ded Edit ion, Ver . 1.10
and 1. 20
INTERACTIVE 386 /ix, Ver. 2.02
SCO UNIX Syst em V/386, Rev. 3. 2
SCO XENIX 386, Rev. 2.3
WINDOWS
GEM/3 desktop, IBM-PC Ver. 3.02
MS-WINDO W S / 286 Ver . 2.1 1
PS/2 mouse not recognised
MS-WINDO W S / 386 Ver . 2.1 1
MS-WINDO W S 3 Ver . 3.0
M290-3 022-9
22
Page 10
Personal Comp ut er - Pock et Se rv ice G uide
HARDWARE COMPATIBI LITY
MODEMSMEMORY EXPANSIONS
HAYES SMARTMODEM (120 0B)
QUADRAM QUADMODEM II (QM2024)
TELENETICS EXPRESSDATA 24i (24i-1 2i)
VEN-TEL PC MODEM HALF-CARD (PCM XT)
AT&T 2200 SERIES M ODEM (2224- CD0)
HAYES SMARTMODEM 12 00
DISPLAY UNITSMOUSE
IBM COLOR GRAPHI CS DISPLAY ( 515 3)
IBM ENHANCED GRAPHICS MONITO R (5154 )
IBM MONOCHROME MONITOR (5151)
IBM PS/2 COLO R DISPL AY (85 12)
NEC MULTISYNC MONI TOR ( APC-H431)
PRINCETON RGB DI SPLAY (HX- 12 )
ZENITH RGB/COMPOSITE DISPLAY
(ZVM-135)
NETWORKING & LAN PRODUCTSI/O INTERFACE PRODUCTS
AT&T STARLAN NETWOR K
IBM PC NETWOR K
IBM TOKEN RI NG NETWORK
NOVELL NETWORK
3COM NETWORK
AST RAMPAGE/286 ( RAM P286)
BOCARAM/AT
IBM 128 KB/512 KB EXPANSION M EM OR Y
OPTION (6450338)
IBM 512 KB/2 MB EXPANSION MEMORY
OPTION (6450343)
IBM ENHANCED MEMORY EXPANSION
ADAPTER (74X8635)
INTEL ABOVEBOARD/2 86 (PCM B4020 )
AT&T BUS MOUSE (459420 )
LOGITECH BUS MOUSE (P7- 3F)
MICROSOF T BUS MO USE, REV. C
MICROSOF T SERIAL MOUSE
MOUSE SYSTEMS PC MOUSE (M 1)
APPARAT PARALLEL/SERIAL CARD
(7950), REV. 1
IBM ASYNCHRONOUS COMM UNICATIONS
CARD (1502074)
IBM MONO DISPLAY/PRINTER ADAPTER
(1504900)
IBM PRINTER ADAPTER (1505200)
IBM SERIAL/PARALLEL CARD ( 6450215)
GRAPHICS PRODUCTS
AST RESEARCH AST-3G PLUS
ATI EGA WONDER
GENOA SUPER EGA HIRES
HERCULES COLOR CARD (GB200)
HERCULES GRAPHICS CARD (GB102)
IBM ENHANCED GRAPHICS ADAPTER
(5154001)
IBM VGA ADAPTER
PARADISE EGA 480
PARADISE MODULAR GRAPHICS CARD
(06-1, Revision 02)
PARADISE MULTI-DISPLAY CARD (05-1)
QUADRAM QUAD EGA PLUS
TECMAR GRAPHICS MASTER BOAR D
(20037, REV. C)
VIDEO-7 VEGA DELUXE
325 INC. ADVANTAGE GRAPHIC S
INTERFACE (325 SHADOW)
■
22-10M290-30
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.