Oki PRO910 User Manual
pro910 Series
User’s Guide
Copyright Information
Copyright © 2009 by Oki Data. All Rights Reserved
Document Information ________________________________
pro910 User’s Guide
P/N 59320601
Revision 1.0
December, 2009
Disclaimer__________________________________________
Every effort has been made to ensure that the information in this document is
complete, accurate, and up-to-date. The manufacturer assumes no responsibility
for the results of errors beyond its control. The manufacturer also cannot guarantee
that changes in software and equipment made by other manufacturers and referred
to in this guide will not affect the applicability of the information in it. Mention of
software products manufactured by other companies does not necessarily
constitute endorsement by the manufacturer .
Whi le a ll re as o nabl e e f fort s h a ve be en made to m a ke th is d ocum en t as a cc u rate an d
helpful as possible, we make no warranty of any kind, expressed or implied, as to
the accuracy or completeness of the information contained herein.
The most up-to-date drivers and manuals are available from the web site:
http://www.okiprintingsolutions.com
Trademark Information _______________________________
Oki and Oki Printing Solutions are registered trademarks of Oki Electric Industry
Company Ltd.
Adobe and PostScript are registered trademarks of Adobe Systems.
Apple, Macintosh, Mac, and Mac OS are registered trademarks of Apple Computers
Inc.
Hewlett-Packard, HP, and LaserJet are registered trademarks of Hewlett-Packard
Company.
Fiery, and the Fiery logo are registered trademarks of Electronics for Imaging, Inc.
Microsoft, MS-DOS and Windows are either registered trademarks or trademarks of
Microsoft Corporation in the United States and/or other countries.
Other product names and brand names are registered trademarks or trademarks
of their proprietors.
pro910 User’s Guide >2
CONTENTS
Notes, cautions and warnings! . . . . . . . . . . . . . . . . 6
Safety warnings . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
About this guide. . . . . . . . . . . . . . . . . . . . . . . . . 14
Software supplied. . . . . . . . . . . . . . . . . . . . . . . . 15
Online usage. . . . . . . . . . . . . . . . . . . . . . . . . 16
Printing pages . . . . . . . . . . . . . . . . . . . . . . . . 16
Printer and paper overview . . . . . . . . . . . . . . . . . 18
Opening and closing the top cover . . . . . . . . . . . . 18
Identifying major components . . . . . . . . . . . . . . . 19
Paper recommendations . . . . . . . . . . . . . . . . . . . 25
Paper input and output information . . . . . . . . . . . 26
Trays and stackers . . . . . . . . . . . . . . . . . . . . . . . 27
Trays 1 to 5 . . . . . . . . . . . . . . . . . . . . . . . . . 27
MP tray. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Face-down stacker . . . . . . . . . . . . . . . . . . . . . 28
Face-up stacker. . . . . . . . . . . . . . . . . . . . . . . 28
Duplex unit (if installed) . . . . . . . . . . . . . . . . . 28
Tray and stacker examples . . . . . . . . . . . . . . . . . 29
Loading Trays 1 to 5 . . . . . . . . . . . . . . . . . . . 29
Using the MP Tray . . . . . . . . . . . . . . . . . . . . . 31
Using the stackers . . . . . . . . . . . . . . . . . . . . . 34
Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Buttons and lights . . . . . . . . . . . . . . . . . . . . . . . 36
Display Panel messages . . . . . . . . . . . . . . . . . . . 38
Status information . . . . . . . . . . . . . . . . . . . . . 38
Menu (Functions) information . . . . . . . . . . . . . 38
Configuration information . . . . . . . . . . . . . . . . 39
Help mode . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Display Panel messages . . . . . . . . . . . . . . . . . . . 39
Using the menus . . . . . . . . . . . . . . . . . . . . . . . . 39
Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Printer location . . . . . . . . . . . . . . . . . . . . . . . . . 41
Turning Off/On. . . . . . . . . . . . . . . . . . . . . . . . . . 42
Turning Off . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Turning On . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Changing the display language . . . . . . . . . . . . . . 44
Checking current settings . . . . . . . . . . . . . . . . . . 45
Interfaces and connection . . . . . . . . . . . . . . . . . . 46
pro910 User’s Guide> 3
Connecting the parallel interface . . . . . . . . . . . 47
Connecting the USB interface . . . . . . . . . . . . . 47
Connecting the network interface . . . . . . . . . . 48
Using the Drivers CD . . . . . . . . . . . . . . . . . . . . . 49
Consumables and maintenance . . . . . . . . . . . . . . 50
Checking consumable/maintenance item usage . . . 50
Replacement indications . . . . . . . . . . . . . . . . . . . 50
Replacing consumables/maintenance items . . . . . . 51
Cleaning the LED heads . . . . . . . . . . . . . . . . . . . 51
Cleaning the paper feed rollers . . . . . . . . . . . . . . 53
Cleaning the printer casing . . . . . . . . . . . . . . . . . 56
Emptying the punch chip box (Punch unit
optional accessory). . . . . . . . . . . . . . . . . . . . . . 57
Optional accessories. . . . . . . . . . . . . . . . . . . . . . . 60
Installing accessories . . . . . . . . . . . . . . . . . . . . . 61
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . 62
General. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Paper Jams . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Paper jams – printer. . . . . . . . . . . . . . . . . . . . . . 62
Open cover, paper jam, tttttt side cover . . . . . . 62
Open cover, paper jam, side cover. . . . . . . . . . 64
Open cover, paper jam, top cover . . . . . . . . . . 66
Paper jams – duplex unit (if installed) . . . . . . . . . 72
Check duplex unit, paper jam . . . . . . . . . . . . . 72
Paper jams – Finisher (optional accessory) . . . . . . 78
Check Finisher, paper jam/paper remains. . . . . 78
591, 592, 593, 599/ 643, 645 (paper jam
around Finisher) . . . . . . . . . . . . . . . . . . . . . 78
594, 597, 598/ 644, 646 (paper jam in Finisher) 81
590 (paper jam in Finisher/Punch unit) . . . . . . 84
Check Inverter, paper jam . . . . . . . . . . . . . . . 87
Avoiding paper jams. . . . . . . . . . . . . . . . . . . . . . 91
Dealing with unsatisfactory printing . . . . . . . . . . . 92
Staple jams – Finisher (optional accessory) . . . . . . 94
Check Finisher, Staple Jam . . . . . . . . . . . . . . . 94
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
pro910 User’s Guide> 4
Appendix A – Display Panel Messages . . . . . . . . 102
Appendix B – Menu system . . . . . . . . . . . . . . . . 104
Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . .105
Print Page Count . . . . . . . . . . . . . . . . . . . . . .105
Finisher Count. . . . . . . . . . . . . . . . . . . . . . . .105
Supplies Life . . . . . . . . . . . . . . . . . . . . . . . . .106
Network . . . . . . . . . . . . . . . . . . . . . . . . . . . .106
Paper Size in Tray . . . . . . . . . . . . . . . . . . . . .107
System. . . . . . . . . . . . . . . . . . . . . . . . . . . . .107
Configuration example – monochrome pages
printed . . . . . . . . . . . . . . . . . . . . . . . . . . . .108
Print Information . . . . . . . . . . . . . . . . . . . . . . . .109
Print Information example – demonstration
page. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110
Print Secure Job. . . . . . . . . . . . . . . . . . . . . . . . .111
Menus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112
Tray Configuration . . . . . . . . . . . . . . . . . . . . .112
System Adjust. . . . . . . . . . . . . . . . . . . . . . . .117
Menus example 1 – Tray 1 transparencies . . . .121
Menus example 2 – MP Tray paper size . . . . . .122
pro910 User’s Guide> 5
N
OTES, CAUTIONS AND WARNINGS
NOTE
A note provides additional information to supplement the main
text.
!
CAUTION!
A caution provides additional information which, if
ignored, may result in equipment malfunction or
damage.
WARNING!
A warning provides additional information which, if
ignored, may result in a risk of personal injury.
S
AFETY WARNINGS
Please be careful to read and understand the safety warnings on
the following pages before operating the printer.
Illustrations
Illustrations and components are representative only. Your unit
may differ slightly from those pictured in this document.
pro910 User’s Guide> 6
WARNING!
Ensure all warning and instruction labels on the
product are read, understood and followed in
order to prevent any risk of injury.
Ensure this and all other documentation is both
read carefully and retained for future
reference.
This printer unit weighs 167.5 lbs (76kg). 3
people are required to lift the printer safely and
prevent any risk of personnel injury.
The product must be placed on a flat solid
surface strong enough to support its weight to
prevent any risk of injury.
Ensure that there is adequate ventilation all
around the product to prevent overheating and
any risk of fire.
Keep the product away from direct heat
sources such as radiators and out of direct
sunlight to prevent any risk of overheating.
Ensure the power source matches the rating on
the product labelling. If in any doubt consult
your dealer or power provider to ensure no risk
of fire or shock exists.
Ensure both the printer and mains power
switches are in the OFF position before
connecting the AC power cable.
pro910 User’s Guide> 7
WARNING!
This product has an earthed plug as a safety
feature and will only connect to an earthed
socket. Do not attempt to defeat the earthing
or there is a risk of fire or shock.
If using an extension cable or power strip
ensure that the total current rating (amperes)
of all connected equipment is less than the
maximum rating of the extension cable, power
strip or wall outlet. Otherwise fire or shock
may occur.
Ensure the power cable is routed so as not to
be damaged or cause a trip hazard. If the cable
becomes frayed or damaged replace it
immediately to prevent any risk of shock.
Do not twist, constrict or knot the power cable
as this can cause overheating which may lead
to fire or electric shock.
Ensure the power socket to which the prin ter is
connected is easily accessible at all times.
Do not connect or disconnect the power plug
with a wet hand as this may cause electric
shock.
Always hold the power plug to connect/
disconnect the power cable to/from the mains
socket. Unplugging by pulling on the cable can
cause fraying and may lead to fire or electric
shock.
pro910 User’s Guide> 8
WARNING!
Use only the power cable supplied. Using a
power cable not intended for this product may
lead to fire or electric shock.
To avoid risk of fire and electric shock, do not
use the power cable supplied with this product
for any other electrical equipment.
If you do not connect the power cord or any
other cables only as directed in the User's
Guide, this may result in a fire.
Ensure loose clothing and hair are kept clear of
moving parts when printer is in operation to
prevent possible risk of injury.
When the printer cover is open, do not touch
the fuser unit as you may receive burns. Allow
it to cool before touching and always use the
handle to lift the fuser.
If the printer casing gets extremely hot or
smoke, unusual smells or abnormal noises are
emitted from the printer, there is a risk of fire.
Unplug the mains connector and contact your
dealer.
If the printer has been knocked over or
damaged, there is a risk of electric shock, fire
and/or injury. Unplug the mains connector and
contact your dealer.
pro910 User’s Guide> 9
WARNING!
If any liquid (for example water) is allowed to
enter the printer, there is a risk of fire. Unplug
the mains connector and contact your dealer.
Do not place containers containing liquid on the
printer as electric shock, fire and/or injuries
may occur.
If any foreign objects (for example clips) are
allowed to enter the printer, there is a risk of
electric shock, fire and/or injury. Unplug the
mains connector before removing the object.
Do not introduce foreign objects into the
ventilation holes or operate the printer with the
rear cover open as electric shock, fire and/or
injuries may occur.
Do not use an extremely flammable spray near
the printer as the printer contains high
temperature parts that may cause a fire.
Switch printer off before cleaning to prevent
any risk of injury. Clean using a damp cloth. Do
not use liquid or aerosol cleaners.
Do not carry out any operations on the printer
that are not specified in the User's Guide. This
may result in electric shock, fire and/or injury.
pro910 User’s Guide> 10
WARNING!
Risk of explosion if battery is replaced by an
incorrect type. Do not touch the battery. Printer
battery should not require replacement during
the life of the printer.
After installing additional memory or a hard
disk drive, the cover door must be closed and
secured to prevent risk of fire.
Take care with toner powder. If swallowed
induce vomiting and seek medical attention.
Never attempt to induce vomiting if person is
unconscious.
Take care with toner powder. If inhaled move
the person to an open area for fresh air. Seek
medical attention.
Take care with toner powder. If it gets into the
eyes flush with large amounts of water for at
least 15 minutes keeping eyelids open. Seek
medical attention.
Take care with toner powder. Spillages should
be treated with cold water and soap to help
reduce risk of staining skin or clothing.
Do not throw toner cartridges or image drum
cartridges into a fire as you may receive burns
from a dust explosion.
pro910 User’s Guide> 11
INTRODUCTION
Congratulations on buying an Oki color printer. Your new printer is
designed with advanced features to give you clear, vibrant color
prints and crisp black and white pages at high speed on a range of
print media for the office.
There are two different models available.
F
EATURES
The following features are standard on all models:
> Up to 31 pages per minute in full color for fast printing of
high impact color presentations and other documents
> Up to 36 pages per minute in black and white for fast and
efficient printing of all general purpose documents not
requiring color
> 1200 x 600 dpi (dots per inch) print resolution for high
quality image production showing the finest detail.pro930
model has 1200 x 1200 dpi resolution.
> Multilevel technology produces subtler tones and
smoother gradations of color to lend photographic quality to
your documents
> Single Pass Color Digital LED technology for high speed
processing of your printed pages
> 10Base-T, 100 Base-TX and 1000 Base-T network connection
lets you share this valuable resource among users on your
office network
> USB 2.0 and parallel (IEEE-1284) interfaces (C910 only)
> PCL5, PCL5c, PCL6, Postscript3 Emulations with direct PDF printing.
pro910 User’s Guide> 12
Additionally, the following features are available:
> Automatic two-sided (duplex) printing for economical use of
paper and compact printing of larger document
> Hard disk drive enables spooled and verified printing
NOTE
This is an optional feature on the pro910 model and is standard on
the pro930.
> Additional paper trays for loading a further 530 sheets at a
time to minimize operator intervention, or different paper
stocks for letterhead stationery, alternative paper sizes or
other print media:
• 2nd/3rd Tray (530 sheets each)
• High Capacity Feeder (HCF) (1590 sheets)
NOTE
Tray configurations are: Tray 1 only, Tray 1 + 2nd Tray, Tray 1 +
2nd Tray + 3rd Tray, Tray 1 + HCF, Tray1 + 2nd Tray + HCF
> Additional memory
> Finisher (for stapling printer output)
> Punch unit (to extend Finisher functionality)
pro910 User’s Guide> 13
A
BOUT THIS GUIDE
NOTE
Images used in this manual may include optional features that
your printer does not have installed.
This manual is your user’s guide (check the web site,
my.okidata.com, for the most up-to-date version) for your printer
and forms part of the overall user support listed below:
> Setup Poster: for quick step by step visual setup of your
printer
This is a paper document that is packaged with the printer.
> Safety, Warranty, Regulatory booklet: includes safety
warnings, product warranty, and regulatory information.
This is a paper document that is packaged with the printer.
> This User’s Guide: to help you to become familiar with your
printer and make the best use of its many features. Also
included are guidelines for troubleshooting and maintenance
to ensure that it performs at its best. Additionally,
information is provided for adding optional accessories as
your printing needs evolve.
This is an electronic document stored on the printer driver CD.
> Printing Guide for Windows users and Mac users: to help
you operate your printer effectively and efficiently.
This is an electronic document stored on printer driver CD.
> Network and Configuration Guide: to provide machine
configuration and network configuration information.
This is an electronic document stored on the Documentation
CD.
> Support and Supplies Guide: for quick reference to
product support resources and information on how to
purchase supplies.
This is a paper document that is packaged with the printer.
> Online Help: online information accessible from the printer
driver and utility software.
pro910 User’s Guide> 14
S
OFTWARE SUPPLIED
CDs:
> Drivers and Utilities
Contains drivers and application software for use by a general
user.
> Network and Administrator Utilities
Contains software for use by system administrators.
> Fiery® Drivers and Tools (pro930 only)
pro910 User’s Guide> 15
O
NLINE USAGE
This guide is intended to be read on screen using an Adobe Acrobat
Reader. Use the navigation and viewing tools provided in Acrobat.
You can access specific information in two ways:
> In the list of bookmarks down the left hand side of your
screen, click on the topic of interest to jump to the required
topic. (If the bookmarks are not available, use the “Contents”
on page 3
P
RINTING PAGES
The whole manual, individual pages, or sections may be printed. The
procedure is:
1. From the toolbar, select [File], then [Print] (or press the
Ctrl + P keys).
2. Choose which pages you wish to print:
(a) [All pages], (1), for the entire manual.
(b) [Current page], (2), for the page at which you are
looking.
1
2
3
pro910 User’s Guide> 16
(c) [Pages from] and [to], (3), for the range of pages you
specify by entering their page numbers.
3. Click on [OK].
pro910 User’s Guide> 17
P
RINTER AND PAPER OVERVIEW
O
PENING AND CLOSING THE TOP COVER
CAUTION!
To gain access to the inside of the printer, ensure that
the top cover is fully opened.
To open the top cover, squeeze the top cover handle (1) to release
the catch and raise the cover.
1
pro910 User’s Guide> 18
To close the top cover, push gently (1) until the cover stops midway
and then push harder (2) to close the cover completely. Ensure that
the cover is securely closed.
1
2
I
DENTIFYING MAJOR COMPONENTS
The major components of your printer are identified in the graphics
below.
1. Paper holding arm
2. Top cover (face-down stacker)
3. MP Tray (multi-purpose tray)
4. Tray 1 side cover
5. Paper size label
6. Paper gauge
7. Tray 1 (paper tray)
8. Control panel
pro910 User’s Guide> 19
9. Top cover handle
9
8
7
1
2
3
6
10. Face-down stacker
11. Power (on/off) switch
pro910 User’s Guide> 20
4
5
12. Fa ce-up stacker
12
10
11
13. Interface unit
14. Network interface connector
pro910 User’s Guide> 21
15. Par allel interface connector
16. USB interface connector
17. Power connector
18. Ve ntilation openings
14
15
18
13
17
19. Image drum cartridge and toner cartridge (Cyan)
20. Image drum cartridge and toner cartridge (Magenta)
pro910 User’s Guide> 22
16
21. Image drum cartridge and toner cartridge (Yellow)
22. Image drum cartridge and toner cartridge (Black)
23. Toner cartridge
24. Image drum cartridge
25. Fuser unit
26. LED heads
26
25
27. Belt unit
28. Drum basket handle
pro910 User’s Guide> 23
19
20
21
22
23
24
29. Drum basket
29
28
27
pro910 User’s Guide> 24
P
APER RECOMMENDATIONS
Your printer will handle a variety of print media, including a range of
paper weights and sizes, transparencies and envelopes. This section
provides some general advice on choice of media, and explains how
to use each type.
Specifications are quoted printing standard weight 20 – 24 lb (75 –
90 g/m²) paper designed for use in copiers and laser printers. Print
speed and feed paths can vary when using thick and specialty
media. Suitable types for all media paths include:
> OKI® Bright White, 32 lb US Bond
> HammerMill® Laser Print Radiant, White, 24 lb US Bond
> Xerox® 4024, 20 lb US Bond
Continuous use of heavily embossed or very rough textured paper is
not recommended.
Pre-printed stationery can be used, but the ink must not offset
when exposed to the high fuser temperatures used in the printing
process.
Envelopes should be free from twist, curl or other deformations.
They should also be of the rectangular flap type, with glue that
remains intact when subjected to hot roll pressure fusing used in this
type of printer. Window envelopes should be carefully checked for
fuser heat compatbility.
Transparencies and films should be of the type designed for use
in copiers and laser printers. In particular, avoid office
transparencies designed for use by hand with marker pens. These
will melt in the fuser and cause damage.
Labels should also be of the type recommended for use in copiers
and laser printers, in which the base carrier page is entirely covered
by labels. Other types of label stock may damage the printer due to
the labels peeling off during the printing process. Generally suitable
types are:
> Avery White Laser Label types 7162, 7664, 7666 (A4), or
5161 (Letter)
pro910 User’s Guide> 25
P
APER INPUT AND OUTPUT INFORMATION
The following table relates paper parameters to input trays (Tray 1
to Tray 5 (numbering from the top) and MP Tray) and to output
areas (Face-down stacker and Face-up stacker).
TYPE SIZE WEIGHT INPUT/
OUTPUT
Plain paper A3, A3 Nobi, A3 Wide,
Postcard – – Tray 1 or MP
Envelope 4.72 x 9.25 in
A4, A5, A6, B4, B5,
Letter, Legal 13,
Legal 13.5, Legal 14,
Executive, Tabloid,
Tabloid Extra
Custom
W: 3.94 – 12.91 in
L: 5.82 – 18 in
Custom
W: 3.12 – 12.91 in
L: 3.54 – 18 in
Banner
W: Letter width
L: 18 – 48 in
Index card:
3 x 5 in
3.54 x 8.07 in
9.25 x 4.72 in
9.25 x 4.13 in
9.45 x 13.07 in
8.50 x 10.91 in
4.69 x 7.76 in
8.27 x 11.69 in
64 – 216 gsm Any Tray
Any Stacker
64 – 216 gsm Any Tray
Face-up Stacker
64 – 300 gsm MP Tray
Face-up Stacker
up to 128
gsm
recommended
64 – 300 gsm MP Tray
64 – 105 gsm
recommended
MP Tray
Face-up Stacker
Face-up Stacker
Tray
Face-up Stacker
MP Tray
Face-up Stacker
12.76 x 9.02 in
9.02 x 6.38 in
8.66 x 4.33 in
8.88 x 3.88 in
9.5 x 4.13 in
7.5 x 3.88 in
Labels A4, Letter, B5 0.004 –
pro910 User’s Guide> 26
0.008 in
MP Tray
Face-up Stacker
TYPE SIZE WEIGHT INPUT/
OUTPUT
Transparencies
Glossy paper
T
RAYS AND STACKERS
T
RAYS1TO
5
A4, Letter 0.004 -
0.005in
Tray 1 or MP
Tray
Face-up Stacker
Tray 1 is the standard blank paper input tray and can hold up to 530
sheets of 20 lb (75 g/m²) paper. Additional trays, to give a total of
five, can be added as an option to give a total tray capacity of 2650
sheets of 20 lb (75 g/m²) paper.
If you have identical paper stock loaded in another tray (for example
Tray 2 or the MP Tray), you can have the printer automatically
switch to that other tray when the current tray runs out of paper.
This function can be enabled by driver settings when printing from a
Windows application or by a menu setting when printing from other
applications.
MP
TRAY
The multi-purpose tray is used for media sizes additional to those of
the standard trays, heavier media weights and special media.
The multi-purpose tray can handle the same sizes as the standard
trays but in weights up to 300 g/m². For very heavy paper stock use
the face-up paper stacker. This ensures that the paper path through
the printer is almost straight.
The multi-purpose tray can feed paper widths as small as 3in
(76.2 mm) and lengths up to 47.24 in (1200 mm). For banner
printing, recommended sizes are Letter wide, 35.43 in and 47.24 in
long and weight 128 g/m².
Use the multi purpose tray for printing on envelopes and
transparencies. Up to 100 sheets of transparencies or 25 envelopes
can be loaded at one time, subject to a maximum stacking depth of
1 in.
Paper or transparencies should be loaded print side up and top edge
into the printer. Do not use the duplex (two-sided printing) function
for transparencies.
pro910 User’s Guide> 27
F
ACE-DOWN STACKER
The face-down stacker on the top of the printer can hold up to 500
sheets of 20 lb (75 g/m²) standard paper, and can handle paper
stocks from 17 – 57 lb (64 – 216 g/m²). Pages printed in reading
order (page 1 first) will be sorted in reading order (last page on top,
facing down).
F
ACE-UP STACKER
The face-up stacker should be opened and the tray extension pulled
out when required for use. (With the face-up stacker either open or
closed, the driver setting of Face Down will successfully direct prints
to the Face-Down stacker.)
The face-up stacker can hold up to 200 sheets of 20 lb (75 g/m²)
standard paper and can handle stocks up to 300 g/m².
Always use this stacker and the multi-purpose feeder for paper
stocks heavier than 57 lb (216 g/m²).
D
UPLEX UNIT
This provides automatic two-sided printing on plain paper fed
from Trays 1 – 5 or the MP Tray. Applicable paper sizes are A6, A5,
B5, B5LEF, Executive, A4, A4LEF, Letter, LetterLEF, Legal 13 in,
Legal 13.5 in, Legal 14 in, B4, Tabloid, Tabloid Extra, A3, A3 Wide,
A3 Nobi, Custom size (3.9 – 12.9 in wide, 5.8 –18 in long), using
paper stocks in the range 64 – 188 g/m².
pro910 User’s Guide> 28
T
RAY AND STACKER EXAMPLES
L
OADING TRAYS
Tray 1 is used in the following example.
1. Pull out the tray.
2. Press the paper rear stopper tab (1) and adjust the tab to the
required paper size.
1 TO 5
1
3. Fan the paper to be loaded then tap the edges of the stack on
a flat surface to make it flush.
pro910 User’s Guide> 29
4. Load the paper (face down and top edge towards the right for
letterhead paper), press the tab (2) on the paper guide and
adjust the guides (3) for a snug fit to the paper.
To avoid paper jams:
• Do not leave space between the paper and the guides and
rear stopper.
• Do not overfill the paper tray. Capacity depends on the
paper type.
• Do not load damaged paper.
• Do not load paper of different sizes or types at the same
time.
3
2
pro910 User’s Guide> 30
Loading...