Oki C5100N SETUP GUIDE

C5100/C5300 2

Installation Instructions

Oki 42158501 Second Paper Tray

Paper Tray

Install the Tray

1. Unpack the tray and remove the shipping materials.

2. Turn off the printer and unplug the power cord.

3. Remove the interface cable.

4. Note the location of the pins (1), connector (2) and tray opening (3).

5. Lower the printer onto the auxiliary tray, aligning the printer with the tray and lowering the holes/plug in the bottom of the printer onto the pins/connector on the tray.

6. Reattach the interface cable.

7. Plug in the power cord and turn on the printer.

8. Print out the Menu Map.

Tray 2 is secure, then reprint and recheck the MenuMap.

10. Check the MEDIA MENU settings shown on the MenuMap and make any needed changes for

•TRAY2 PAPERSIZE

• TRAY2 MEDIATYPE

• TRAY2 MEDIAWEIGHT to match the print media you will

normally use in Tray 2. (If you need help with this, see “How to Make Changes in the Menus” in your on-line User’s Guide, or refer to “Changing Default Media Weight Settings” in your Handy Reference Guide.)

Load Paper

1. Pull out the tray.

2. Fan the paper

3. Position the paper guides in the tray.

4. Load paper (up to 530 sheets, 20-lb. US Bond), keeping the stack below the full line (1).

BACK ENTER

a. Press

b. Press

9. Look for TRAY2 in the information at the top of the first page of the MenuMap and under the MEDIA MENU listing. If it isn’t there, check to be sure that the connection between the printer and

+ one or more times until

INFORMATION MENU appears

on the display.

ENTER twice.

The MenuMap prints.

OLN INE

CANCEL

5. Push the tray back into the printer.

(continued on back)

Activate the Tray in the Printer Driver

Windows

PCL Driver, C5300

1. Click [

Printers and Faxes for XP].

The Printers (Printers and Faxes) dialog box opens.

2. Right click the PCL printer icon, then click

3. Click the Device Option(s) tab.

4. For

Available Tray, select 2.

5. Click (Printers and Faxes) dialog box.

Postscript Emulation Driver, C5300

1. Click

Printers and Faxes for XP].

[

The Printers (Printers and Faxes) dialog box opens.

2. Right click the Postscript emulation printer icon, then click

Properties.

3. Next:

– Windows XP, 2000 and NT 4.0:

click the

– Windows Me and 98: click the

Device Options tab.

4. Then:

– Windows XP, 2000, NT 4.0 and

Me: under click

– Windows 98: under

setting for Available Tray 2 (1 Optional Tray).

5. Click (Printers and Faxes) dialog box.

Start → Settings → Printers

Properties

OK, then close the Printers

Start → Settings → Printers

Device Settings tab.

Installable Options,

Available Tray and select 2.

Change

, select

OK, then close the Printers

Hiper-C Driver, C5100

1. Click

Start → Settings → Printers

[

Printers and Faxes for XP].

The Printers (Printers and Faxes) dialog box opens.

2. Right click the printer icon, then click

Properties.

3. Next:

– Windows XP, 2000 and NT 4.0:

click the

Device Option(s) tab.

– Windows Me and 98: click the

Printer Properties tab, then click

the

Device Option tab.

Available Tray, select 2.

4. For

5. Click

OK, then close the Printers

(Printers and Faxes) dialog box.

Macintosh

OS 8.x and 9.x, C5300

1. Activate

Chooser from the Apple

menu.

2. Select

3. Click

4. Click

5. Change the

6. Click

7. Close

LaserWriter 8. Printer → Setup. Configure.

Available Tray setting

2 (1 Optional Tray).

OK twice.

Chooser.

OS X to X.1, C5300

No activation is required.

OS X.2, C5300

1. Activate

Hard Utilities → Print Center.

Print Center from Local

Drive → Applications →

2. Highlight the printer name and select from the menu

Show Info

3. Click the

Available Tray

drop-down menu and select

Optional Tray)

4. Click

Apply Changes and exit to

Printers →

2 (1

the desktop.