Ohsung Electronics URC-MX900I User Manual

Order Number : GETEC-C1-12-376 FCC Part 15 subpart C
Test Report Number : GETEC-E3-12-136 Page 1 / 1

APPENDIX H

: USER’S MANUAL

EUT Type: RF REMOTE CONTROLLER

FCC ID.: OZ5URC-MX900i

Operating Your System

With The MX-900i

This remote control was
Custom Programmed for you by:

For questions about your Custom Programming call:

Custom Programming of a complex home theater and/or a multi-room
system is one of the most challenging tasks within an audio/video instal­lation. It involves an intimate knowledge of how the components interact
and exact details on the proper sequences of control.

Only a Complete Control dealer has the requisite experience and training
to quickly and effectively customize a remote control for true automated
operation.

Congratulations on your choice!

MX-900i Owners Manual © 2006 Universal Remote Control, Inc.
Front Cover Photo courtesy of Robert Ridenour of Connected Technologies,

www.connected-technologies.com

The information in this manual is copyright protected. No part of this manual may be
copied or reproduced in any form without prior written consent from Universal
Remote Control, Inc.

UNIVERSAL REMOTE CONTROL, INC. SHALL NOT BE LIABLE FOR OPERATIONAL,
TECHNICAL OR EDITORIAL ERRORS/OMISSIONS MADE IN THIS MANUAL.

The information in this manual may be subject to change without prior notice.

Complete Control is a registered trademark of Universal Remote Control, Inc.
Entertainment Made Simple is a trademark of Universal Remote Control, Inc.

All other brand or product names are trademarks or registered trademarks of their
respective companies or organizations.

Universal Remote Control, Inc.

500 Mamaroneck Avenue, Harrison, NY 10528

Phone: [phone] Fax: [phone]

TABLE OF CONTENTS

Congratulations! 1

Custom Labeled Buttons 1

Optional RF “No Rules” Operation 2

Installing Batteries 3

Programming the MX-900i 4

Selecting a New “Activity” 5

Using the MX-900i to Control an “Activity” 6

Displaying the Setup Screen 7

Selecting from the Setup Screen 7

Setting the LCD 8

Light Settings 10

Sound Volume 10

System Settings 11

Version Information Displays 11

USA Limited Warranty Statement 12

Specifications 13

Federal Communication Commission Interference Statement 14

Declaration of Conformity 15

MX-900i OWNERS MANUAL

Congratulations!

You’ve purchased a unique synthesis of hardware and software engineering, the
Complete Control MX-900i. The MX-900i achieves a magnificent combination of
power and flexibility, simplifying and automating operation of even the most
complex system.

One Touch Blue Backlighting

Simply press the LIGHT button to backlight the screen.

Integrated Sound Signaling

The MX-900i incorporates a small speaker for beeps. Anytime you press a
button, the MX-900i signals that it has understood your command with a
beep sound.

Custom Labeled Buttons

The MX-900i is equipped with a bright easy to read LCD screen which
labels the six buttons to the right of the screeen. These button labels
change based on what you are watching or listening to. Thus, if you have
selected Watching TV, you will see a list of buttons that are useful to that
activity, while if you select DVD, the buttons will control the DVD.

LIGHT Button

Press the Light button on the
side of the MX-900i to backlight
the LCD display and all of the
buttons.

Page 1

Page 2

MX-900i OWNERS MANUAL

Optional RF “No Rules” Operation

In combination with a Complete Control RF Base Station, the MX-900i can
control your system without being in line-of-sight of the equipment.

3. The MRF-350i’s built-in Front Blaster sends commands to
components in the same cabinet space as the MRF-350i.

4. Self-adhesive “Flashers” affix to the
Infrared sensors on the front panels of your
components. The Flashers relay commands
to components out of sight of the MRF­350i’s Front Blaster. The flashers plug in to
the MRF-350i’s rear flasher line outputs via
their 10 foot cables. Uniquely, the MRF-350i
can also connect to rear panel IR Inputs via
its adjustable IR Line Outputs.

2. The RFX-250i RF Sensor can be freely
positioned for optimal reception.

Either the MRF-350i or the RFX-250i RF base station is compatible with the
MX-900i. Both incorporate RF addressing. RF Addressing gives you the ability to
control equipment locations throughout your home, even if they are concealed
in other rooms or are behind closed doors.

1. The MX-900i sends radio waves
in every direction, so you don’t
have to point the remote any­more!

Installing Batteries

Open the battery cover by pressing
the release and pulling back the
cover on the back of the control.
Remove the cover.

Observe the + and - polarity
indications inside the battery
compartment.

Place the four AAA batteries into
their positions in the battery com­partment observing the + and ­polarity indicators on the batteries.

Now, replace the battery cover by
inserting the hinged end in first,
then snapping the cover back into
place.

Page 3

MX-900i OWNERS MANUAL

+

+

-

-