Ohsung Electronics URCMX810I Users Manual

Test Report No.: GETEC-E3-07-085

FCC Part 15 Subpart B,C

APPENDIX I

: USER’S MANUAL

EUT Type: RF Remote Controller

FCC ID.: OZ5URCMX810I

Operating Your System

With the MX-810i

This remote control was
Custom Programmed for you by:

For questions about your Custom Programming call:

Custom Programming of a complex home theater and/or a multi-room
system is one of the most challenging tasks within an audio/video instal­lation. It involves an intimate knowledge of how the components interact
and exact details on the proper sequences of control.

Only a Complete Control dealer has the requisite experience and training
to quickly and effectively customize a remote control for true automated
operation.

Congratulations on your choice!

MX-810i Owners Manual © 2007 Universal Remote Control, Inc.
Front Cover Photo courtesy of Robert Ridenour of Connected Technologies,

www

.connected-technologies.com

The information in this manual is copyright protected. No part of this manual may
be copied or reproduced in any form without prior written consent from Universal
Remote Control, Inc.

UNIVERSAL REMOTE CONTROL, INC. SHALL NOT BE LIABLE FOR OPERATIONAL,
TECHNICAL OR EDITORIAL ERRORS/OMISSIONS MADE IN THIS MANUAL.

The information in this manual may be subject to change without prior notice.

Complete Control is a registered trademark of Universal Remote Control, Inc.
Entertainment Made Simple is a trademark of Universal Remote Control, Inc.

All other brand or product names are trademarks or registered trademarks of their
respective companies or organizations.

Printed in Korea

Universal Remote Control, Inc.

500 Mamaroneck Avenue, Harrison, NY 10528

Phone: [phone] Fax: [phone]

Introduction to the MX-810i 1

Optional RF “No Rules” Operation 2

Installing and Charging the Battery 3

Programming the MX-810i 4

Using the MX-810i to Manually Control a “Device” 5

Using the MX-810i to Automate an “Activity” 6

Using the Help System for Automated Activities 7

Accessing the MX-810i’s Setup Menus 7

Selecting from the Setup Menus 8

Setting the Color Screen 8

Setting the Button Lighting 9

System Menu 10

Setting the Button Beep Volume 11

Date and Time Menus 12

Erasing and Resetting 13

USA Limited Warranty Statement 13

Specifications 14

Contact Us 14

Your Programming Notes - Devices 15

Your Programming Notes - Activities 16

TABLE

OF CONTENTS

MX-810i O

WNERS MANUAL

MX-810i O

WNERS MANUAL

Page 2Page 1

Congratulations!

You’ve purchased a unique synthesis of hardware and software engineering,
the Complete Control MX-810i. The MX-810i achieves a magnificent combina­tion of power and flexibility, simplifying and automating operation of even the
most complex system.

User Configurable Screen and Button Lighting

A built in pick up sensor can be set to light the screen and/or the buttons
automatically. Additionally, a dedicated LIGHT button enables the user to
backlight the buttons if the pick up sensor is turned off.

Integrated Sound Signaling

The MX-810i incorporates a small speaker for beeps. Anytime you press a
button, the MX-810i signals that it has understood your command with a
beep sound.

Custom Labeled Buttons

When you pick up the MX-810i, it automatically lights up the color LCD
screen which labels the six buttons to either side of the screeen. These
button labels change based on what you are watching or listening to.
Thus, if you have selected Watch TV, you will see a list of buttons that
are useful to that activity, while if you select Watch DVD, the buttons
will control the DVD.

LIGHT Button

Press the Light button on the
side of the MX-810i to back­light all of the buttons. Of
course, you could opt to set
the buttons to light automati­cally via the pick up sensor.

Optional RF “No Rules” Operation

In combination with a Complete Control RF Base Station, the MX-810i can
control your system without being in line-of-sight of the equipment.

Either the MRF-350i or the MRF-260i RF base station is compatible with the
MX-810i. Both incorporate RF Addressing. RF Addressing gives you the abili­ty to control equipment locations throughout your home, even if they are
concealed in other rooms or are behind closed doors.

3. The MRF-350i’s built-in Front Blaster sends commands to
com

p

onents in the same cabinet space as the MRF-350i.

1. The MX-810i sends radio waves
in every direction, so you don’t
have to point the remote any­more!

4. Self-adhesive “Flashers” affix to the
Infrared sensors on the front panels of your
components. The Flashers relay commands
to components out of sight of the MRF-350i’s
Front Blaster. The flashers plug in to the
MRF-350i’s rear flasher line outputs via their
10 foot cables. Uniquely, the MRF-350i can
also connect to components with rear panel
IR Inputs via its adjustable IR Line Outputs.

2.The RFX-250i RF Sensor can be freely
positioned for optimal reception.

MX-810i O

WNERS MANUAL

MX-810i O

WNERS MANUAL

Page 3 Page 4

Installing and Charging the Battery

Open the battery cover by pressing
on the release clip and removing
the cover.

Note that the three contacts on the
battery must connect to the three
spring-loaded contacts in the MX­810i. Angle the battery into the bat­tery compartment, contacts first,
then gently fit the rear of the battery
into the compartment as well.
Replace the battery cover by insert­ing the hinged end in first, then
snapping the cover back into place.

You can charge the Lithium Ion bat­tery by simply plugging the includ­ed charger into the base of the
remote as shown here.

The MX-810i can be used while
charging.

Programming the MX-810i

The MX-810i is programmed via a Windows PC equipped with a USB port
(programming cable included), using our proprietary software, MX-810i
Setup. You can download this software from our website:

www

.universalremote.com

Basic setup takes only a few minutes with this software. However, to fully
automate an audio/video system the programmer must have a detailed
knowledge of each component and how the system is connected and
operated. We highly recommend that you use a professional audio/video
installer to program your MX-810i so you will be able to enjoy all the
benefits of the MX-810i as well as one touch operation via Activities.

If you do opt to do some programming on your own, fill out the NOTES at
the end of this manual before beginning. This will greatly speed the
process of programming.