Ohsung Electronics URCMX6000I Users Manual

Test Report No.: GETEC-E3-08-053

FCC Part 15 Subpart C

APPENDIX I

: USER’S MANUAL

EUT Type: RF Remote Controller

FCC ID.: OZ5URCMX6000I

Operating Your System

With The MX-6000i

Two Way Touch Screen

OCE-0026J(MX-6000i).QXD 12/16/08 4:43 PM Page 1

Page 2

MX-6000i T

WO WAY TOUCH SCREEN

This remote control was Custom Programmed for you by:

For questions about your Custom Programming call:

Custom Programming of a complex home theater and/or
a multi-room system is one of the most challenging tasks
within an audio/video installation. It involves an intimate
knowledge of how the components interact and exact
details on the proper sequences of control.

Only a Complete Control dealer has the requisite
experience and training to quickly and effectively cus­tomize a remote control for true automated operation.

Congratulations on your choice!

MX-6000i Owners Manual © 2008 Universal Remote Control, Inc.

The information in this manual is copyright protected. No part of this manual may
be copied or reproduced in any form without prior written consent from Universal
Remote Control, Inc.

UNIVERSAL REMOTE CONTROL, INC. SHALL NOT BE LIABLE FOR OPERATIONAL,
TECHNICAL OR EDITORIAL ERRORS/OMISSIONS MADE IN THIS MANUAL.

The information in this manual may be subject to change without prior notice.

Complete Control is a registered trademark of Universal Remote Control, Inc.
Entertainment Made Simple is a trademark of Universal Remote Control, Inc.

All other brand or product names are trademarks or registered trademarks of their
respective companies or organizations.

500 Mamaroneck Avenue, Harrison, NY 10528

Phone: [phone] Fax: [phone]

OCE-0026J(MX-6000i).QXD 12/16/08 4:43 PM Page 2

Page 3

MX-6000i T

WO WAY TOUCH SCREEN

Table of Contents

Introduction 4

Connecting the Battery Pack 5

Using the Charging Base 5

Two Way via WiFi 5

Optional RF “No Rules” Operation 6

Operating Your System 7

Using Two Way Personal Server Features 8

Displaying the Settings Screen 11

Sleep Settings 11

Brightness 11

Button Light 11

Sound 12

Date and time 12

System 12

Pickup Settings 13

Network 13

Calibration 13

Factory Default 13

Exit 13

USA Limited Warranty Statement 14

Federal Communication Commission Interference
Statement 14

Specifications 15

Regulatory Information to the user 16

Precautions and Information Concerning

Rechargeable Lithium-lon Batteries 18

OCE-0026J(MX-6000i).QXD 12/16/08 4:43 PM Page 3

Page 4

MX-6000i T

WO WAY TOUCH SCREEN

Congratulations

You’ve purchased a unique synthesis
of hardware and software engineer­ing, the Complete Control MX-6000i.
The twin goals of the design team
were to improve the elegance and
usability of touch screens through the
physical design while providing a
new standard in brightness, clarity
and animation for the touch screen
itself.

Easy Operation

By assigning the important home theater operational buttons to the
natural resting place of the end users thumbs, the MX-6000i
achieves a new standard in use and comfort.

Automatic Backlighting

The integral motion sensor detects any movement of the touch
screen and automatically backlights the screen. You do not have to
press any button to display the screen. Any movement of the MX­6000i renews the backlighting. To adjust the backlighting, see page

11.

Programming the MX-6000i

To fully automate an audio/video system and integrate two way
automation of servers etc. the programmer must have a detailed
knowledge of each component, LAN configuration, WiFi optimiza­tion and how the system is connected and operated. Only a trained
and certified professional audio/video installer can install an MX­6000i automation system in a timely and efficient manner.

Integrated Stylus

Stowed away in the top right hand corner storage slot, is a custom
made stylus for your convenience.

OCE-0026J(MX-6000i).QXD 12/16/08 4:43 PM Page 4

Page 5

MX-6000i T

WO WAY TOUCH SCREEN

Connecting the Battery Pack

Unlock the rear cover by pressing down on the two locking tabs
and sliding the battery cover forward.

Remove the cover. For shipment from the factory, the battery is left
out of the MX-6000i. Place the battery into the battery compart­ment, making sure you align the contacts on the battery to the con­tacts on the MX-6000i. The battery will snap into place when
aligned properly.

Replace the cover and snap it into place.

Using the Charging Base

Plug the 6V DC adapter into a power outlet and into the back of
the charging base.

Gently place the MX-6000i
into the cradle of the charging
base. It automatically aligns
itself to the contacts on the
charging base.

The Status light should imme­diately light. Red indicates
that it is charging. Blue shows
that it is fully charged. There is
no harm in leaving the MX­6000i on its charging base
whenever it is not in use.

Two Way via WiFi

To use the MX-6000i with any two way companion product, the
MX-6000i must be configured by your installer to be part of a LAN
(local area network) via a WiFi b/g access point or router. This is
not user configurable. If you have any questions, consult with your
custom installer.

Red indicates charging, Blue that the remote is fully
charged.

OCE-0026J(MX-6000i).QXD 12/16/08 4:43 PM Page 5

Page 6

MX-6000i T

WO WAY TOUCH SCREEN

Optional RF “No Rules” Operation

In combination with an MSC-400 Master System Controller, or an
RF Base Station, the MX-6000i can control your system without
being in line-of-sight of the equipment.

The MSC-400 enhances the capabilities of the MX-6000i by storing
and issuing Smart Macros to your main system components. It is
triggered by RF Smart Macro commands via RF (radio frequency).
In addition, your MX-6000i can control components in secondary
rooms and systems via MRF-350i or MRF-260i RF base stations.

4. Self-adhesive “Flashers” affix to the
Infrared sensors on the front panels of
your components. Uniquely, all
Complete Control base stations can also
connect to components with rear panel
IR Inputs via adjustable IR Line
Outputs. The MSC-400 offers RS-232
control via rear panel connections as
well.

3. The MSC-400 can control IR, RS232 and Relay con­trolled devices.

1. The MX-6000i sends
radio waves in every direc­tion, so you don’t have to
point the remote anymore!

2. The RFX-250i RF Sensor can be
freely positioned for optimal recep­tion.

OCE-0026J(MX-6000i).QXD 12/16/08 4:44 PM Page 6