Ohsung Electronics URCMX-3000 User Manual

Test Report No.: GETEC-E3-05-068

FCC Part 15 Subpart B

APPENDIX I

: USER’S MANUAL

Class II Permissive Change

EUT Type: RF Transmitter Universal Remote Control

FCC ID: OZ5URCMX-3000

MX-3000

Owners Manual

This remote control was
Custom Programmed for you by:

For questions about your Custom
Programming call:

Custom Programming of a complex home theater and/or a
multi-room system is one of the most challenging tasks
within an audio/video installation. It involves an intimate
knowledge of how the components interact and exact details
on the proper sequences of control.

Only a Home Theater Master dealer has the requisite
experience and training to quickly and effectively customize a
remote control for true automated operation.

Congratulations on your choice!

MX-3000 Owners Manual © 2004 Universal Remote Control, Inc.

The information in this manual is copyright protected. No part of this manual may
be copied or reproduced in any form without prior written consent from Universal
Remote Control, Inc.

UNIVERSAL REMOTE CONTROL, INC. SHALL NOT BE LIABLE FOR OPERATIONAL,
TECHNICAL OR EDITORIAL ERRORS/OMISSIONS MADE IN THIS MANUAL.

The information in this manual may be subject to change without prior notice.

Home Theater Master is a registered trademark of Universal Remote Control, Inc.
Entertainment Made Simple is a trademark of Universal Remote Control, Inc.

All other brand or product names are trademarks or registered trademarks of their
respective companies or organizations.

500 Mamaroneck Avenue, Harrison, NY 10528

Phone: [phone] Fax: [phone]

TABLE OF CONTENTS

Congratulations 1

Connecting the Battery Pack 1

Using the Charging Base 2

Programming the MX-3000 2

No More Pointing! 3

Operating Your System 4

Displaying the Settings Screen 5

Adjusting Backlighting 5

Adjusting Brightness 5

Button Light Settings 5

Sound 6

Setting Time and Date 6

Power Settings 6

System 6

Pickup Settings 7

Calibration 7

Factory Default 7

Exit 7

Maintaining Your MX-3000 8

Warranty 8

Specifications 8

Information To The User 9

Warning 9

Page 1

MX-3000 COLOR TOUCH SCREEN

Congratulations

You’ve purchased a unique synthesis of
hardware and software engineering, the
Home Theater Master MX-3000. The twin
goals of the design team were to improve
the elegance and usability of touch screens
through the physical design while providing
a new standard in brightness, clarity and
animation for the touch screen itself.

Easy Operation

By assigning the important home theater operational buttons to the natu­ral resting place of the end users thumbs, the MX-3000 achieves a new
standard in use and comfort.

Automatic Backlighting

The integral motion sensor detects any movement of the touch screen and
automatically backlights the screen. You do not have to press any button
to display the screen. Any movement of the MX-3000 renews the
backlighting. To adjust the backlighting, see page 5.

Connecting the Battery Pack

Unlock the rear cover by using a coin to move the locking screw to the
Unlock position.

Remove the cover. For shipment from the fac­tory, the battery cable is left unplugged. Plug
the cable into the socket next to the battery.
The connector is slotted to prevent plugging it
in the wrong way, so don’t force it.

Replace the cover and lock it into place with
a coin.

Locked

Battery Cable Plugged In

Un-Locked

Page 2

MX-3000 COLOR TOUCH SCREEN

Using the Charging Base

Plug the 5V DC adapter into a
power outlet and into the back of
the charging base.

Gently place the MX-3000 into the
cradle of the charging base.

Push down on the base of the
MX-3000 until you hear and feel a
firm “click”.

The Status light should immediately
light. Red indicates that it is
charging. Blue shows that it is fully
charged. There is no harm in leaving the MX-3000 on its charging base
whenever it is not in use.

Programming the MX-3000

The MX-3000 is programmed via a windows PC equipped with a USB
port (we include a programming cable in the box), using our proprietary
software, MX-3000 Editor. You can download this software from our
website:

www.universalremote.com

Basic setup takes only a few minutes with this software. However, to fully
automate an audio/video system the user must have a detailed knowledge
of how the system is connected and operated. We highly recommend that
you use a professional audio/video installer to program your MX-3000 if
you would like to enjoy one touch operation via macros.

The MX-3000 on it’s Charging Base.