Ocean Optics JAZ-EXT-BP50WH Instructions Manual

Page 1
The Jaz Battery Pack includes the following accessories:
AC wall charger Car charger Holster and belt clip One universal cable with a 5.5mm jack
for connecting to the 12V power supply
Jaz Battery Pack (JAZ-EXT-BP-
50WH) Instructions
Description
The Jaz Battery pack (JAZ-EXT-BP-50WH) is an accessory 5V power supply for Jaz, a community of stackable optical sensing instruments. This battery pack is a multi-purpose, rechargeable Lithium-ion external battery that connects to the JAZ-DPU module and prolongs uptime by 3X.
Package Contents
013-30000-510-05-201510 1
Page 2
Jaz Battery Pack Instructions
One universal cable with 3.5mm jack that
connects to the 3V/8.4V power supply (always use this cable when interfacing with Jaz)
Cable adapters
Ensure that the switch is set all the way to the right for 5V operation as indicated on label
Set-up and Operation
Charging the Battery
Charge the battery pack using either the included AC adapter or the included car adapter. Always follow the manufacturers recommended instructions for charging the external battery pack.
Connecting the Battery Pack to Jaz
Procedure
1. Make sure that the selector switch on the back of the battery pack is set to 5V.
2. Insert the cable mating plug into the DC jack adapter with the 3.5mm output as shown below:
2 013-30000-510-05-201510
Page 3
Jaz Battery Pack Instructions
3. Connect the end of the cable with the right-angle plug to the 3.5mm socket on the side of the
battery pack.
4. Connect the output of the DC jack adapter to the 5V input connector on the JAZ-DPU module.
5. Now that the battery pack is connected to Jaz, you can monitor the charge state of the battery
pack using the power Test button on the top of the battery pack as follows:
228-70000-000-05-0106 3
Page 4
Jaz Battery Pack Instructions
Specification
Value
Battery Type
Rechargable Lithium-Ion
Included Chargers
Quick AC charger; car kit charger
Battery Gauge
4-stage LED charge level indicator
Charge Time
3 hours (from fully discharged)
Charge Current
2000 mA
Jaz Interface
Connects directly to DC jack on JAZ-DPU module via universal cable (with 3.5mm jack)
Size
58.5 x 41 x 82 mm
Weight
300g
4 LEDs = 75 – 100% charged 3 LEDS = 50 – 75% charged 2 LEDS = 25 – 50% charged 1 LED = < 25% charged Charge time is typically 3 hours (from fully discharged).
Specifications
4 013-30000-510-05-201510
Loading...