Ocean Optics Jaz Ethernet Ferrite User Manual
Jaz Ethernet Ferrite Installation
We here at Ocean Optics want you to know that we appreciate your business. To speak to a Technical
Support representative or an Ocean Optics Applications Scientist, please call (727) 733-2447. Our office
hours are 8 a.m. – 8 p.m. (Mon-Thu), 8 a.m. – 6 p.m. (Fri) EST.
Overview
A ferrite is provided with your JAZ-E Ethernet module to be used in the event that you experience
interference with any electronic devices.
Connecting the Ferrite to the Jaz Ethernet Cable
► Procedure
1. Find the Ethernet cable and the ferrite that you received in your Jaz package.
2. Open the ferrite.
3. Place the ferrite on the Ethernet cable as close to the connector for the computer as possible.
100-4000-028-01-0209 1
OmniDriver Installation Instructions
4. Loop the Ethernet cable through the ferrite twice.
5. Snap the ferrite closed to lock it in place.
6. Plug the Ethernet cable into the Ethernet connector on the JAZ-E module, and then to a
Power Over Ethernet (POE) bridge or switch to the network (e.g., an 8-port network hub).
For More Information
You can access complete documentation for Ocean Optics products on the Software and Technical
Resources CD or by visiting our website at
Instructions. Choose the appropriate document from the drop-down lists or use the Search by Model
Number field.
2 100-4000-028-01-0209
http://www.oceanoptics.com. Select Technical | Operating
Loading...