Oasis R1P User Manual

REMOTE WATER CHILLERS

R1P

Suggested Specification

Remote drinking water chiller shall deliver at least 1.0 gph of
water at 50° F cooled from 80° F inlet water at 90° F ambient.
Evaporator shall be copper evaporator tube on stainless steel
water storage tank and both shall be encapsulated in insulation.
Total water system shall be stainless steel. R-134a refrigerant
system shall be hermetically sealed and refrigerant flow shall be
capillary tube controlled. An adjustable thermostat having an off
position shall control refrigeration system. Potable water system
components shall comply with Safe Drinking Water Act Amend­ments, the 1988 Lead Contamination Control Act and shall be
Certified to ANSI 61 Section 9. Cooler shall be Listed by
Underwriters Laboratories Inc. to U.S. and Canadian safety
standards. Drinking water chiller shall be Oasis model R1P.

Standard Features

> Powder coated galvanized steel cabinet with plastic front
> Air-cooled; designed to fit under a sink
> Compact, economical and easily installed
> Four foot (4’) insulated power cord with NEMA 5-15 plug
> Stainless steel storage tank
> 1/4” OD stainless steel water tube connections
> Welded water lines to eliminate corrosion and
assure leakproof operation
> HFC Refrigerant R-134a
> Product Certified to NSF/ANSI Standard 61,
Annex G (AB1953)

Components in these water coolers are lead free as
defined by the Safe Water Act Amendments of 1986,
and the Lead Contamination Control Act of 1988.

Limited 1-Year Warranty (Continental limits of the United
States and Canada): One year from the date of installation.
Detailed warranty certificate enclosed with each drinking
fountain; sample copy available upon request.

Export Warranty: One year on component parts. Detailed
warranty certificate enclosed with each drinking fountain;
sample copy available upon request.

Product Certified to NSF/ANSI Standard 61, Annex G
(weighted average lead content of <=0.25%) and is in compli­ance with California's Health & Safety Code Section 116875
(commonly known as AB1953).

Model covered by this specification complies with all
known Plumbing Codes. Listed by Underwriters’ Laboratories
to U.S. and Canadian standards and conform to European
Union Directives.

50° F Drinking Water

90° F Ambient Air Temp*

Model

R1P 1 n/a n/a n/a 1/20 1.3 135 n/a

*Industry Standard Rating Condition 80° F inlet water temperature.

Cooling Capacity

GPH

Base Rate

GPH

Pre-Cooler Compr.

Hot ’N Cold™

Model

HP

115 Volts, 60 HZ

Full Load

Amps

Rated
Watts

Glass Filler
Acc. Option

**Specifications subject to change without notice

Cabinet

Color Finish

30 Lbs.

White/gray

Net Wt.
Approx.

Form 4061 | Rev. 06/09

Oasis International | 222 East Campus View Blvd. | Columbus, OH 43235

For Customer Service and Technical Helpline assistance call: 800.950.3226

OASIS

™

REMOTE WATER CHILLER R1P

www.oasiscoolers.com

OASIS is a trademark of Oasis International

2009 Oasis International