Oasis PWSBF User Manual

BARRIER-FREE VERSACOOLER® II
PWSBF (VersaFiller Retrofit kit)
VersaFiller
alcove is tall
enough to
accommodate
most sizes of
refillable water
bottles on the
market.
Suggested Specification
When retrofitted to either the P8AC or P8AM, the PWSBF Bottle Filler has independent manual activation. VersaFiller alcove and activation button contain Freshield, WHICH UTILIZES a silver-based antimicrobial compound that reduces the growth of micro-organisms and mildew to protect the surfaces from discoloration, odors and degradation. VersaFiller cabinet finish is Brushed Stainless Steel.
When retrofitted to either the P8AC or P8AM the VersaFiller
models satisfy CABO/ANSI A117.1 and these water coolers comply with ADA requirements when properly installed. Units also meet guidelines for children’s accessibility providing the floor to orifice height is 30 inches and proper clear floor space is provided for frontal approach.
Standard Features
> Waterways Are Lead-Free In Materials & Construction > Heavy Duty Steel Frame > Surface Mount Frame Assembly > VersaFiller has Independent Mechanical Activation
Finishes
> VersaFiller Cabinet Finish is Brushed Stainless Steel
Installation
> Prior to roughing consult with local, state, and federal codes for proper mounting height. > Shipped with complete instructions and wall mounting brackets.
The PWSBF Versafiller is designed to retrofit on existing Oasis P8AC and P8AM pressure cooler models
Models that this unit will not retrofit to: electric eye P8AC and P8AM units. Units with optional glass fillers must have the glass filler disconnected and removed.
ADA Compliant when retrofitted to either the P8AC or P8AM
Components in this fountain are lead free as defined by the Safe Drinking Water Act Amendments of 1986, and the Lead Contamination Control Act of 1988.
Limited 1-Year Warranty (Continental limits of the United States and Canada): 1 year on most component parts Detailed warranty certificate enclosed with each water cooler; sample available upon request.
Export Warranty: One year on component parts. Detailed warranty certificate enclosed with each drinking fountain; sample copy available upon request.
Product Certified to NSF/ANSI Standard 61, Annex G (weighted average lead content of <=0.25%) and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953). Models covered by this specification comply with all known Plumbing Codes. Listed by Underwriters’ Laboratories to U.S. and Canadian standards.
50° F Drinking Water
90° F Ambient Air Temp*
Model
PWSBF No No No Yes 10 Lbs.
* Industry Standard Rating Condition 80° F inlet water temperature. *NSF Pending.
Rated Capacity
GPH
Base Rate
GPH
Pre-Cooler Hot ’N Cold™
Model
Compr.
HP
115 Volts, 60 HZ
Full Load
Amps
Rated Watts
**Specifications subject to change without notice
Glass Filler Acc. Option
Cabinet
Color Finish
Net Wt. Approx.
Oasis® PWSBF VersaFiller Retrofit kit with P8AC (not included).
Rough-in drawing
is shown with a
P8AC unit in order
to show the proper
height of the unit
when retrofitted to
the parent unit and
height from the
floor in order to
comply with ADA
standards. THE
P8AC UNIT IS NOT
INCLUDED WITH
THE PURCHASE
OF THE PWSBF.
Form 3992 | Rev. 06/10 Oasis International | 222 East Campus View Blvd. | Columbus, OH 43235 For Customer Service and Technical Helpline assistance call: 800.950.3226
www.oasiscoolers.com
OASIS is a trademark of Oasis International
2010 Oasis International
Loading...