Oakley 512MB, 256MB User Manual

MANUAL

©2004 OAKLEY, INC. ONE ICON FOOTHILL RANCH CA 92610 WWW.OAKLEY.COM 70N810 8/04 REV. A

®

®

™

1

TABLE OF CONTENTS

Getting Started 1
Setting Up OAKLEY THUMP

™

to Play Music 2-4
Supported Music File Formats 5
Store Any Kind of File 6
Charging the Battery 7
Accessories 8
Troubleshooting 9-10
Safety and Handling 11-13
Cleaning 14
Specifications 15-17
Service and Support 18-22
Communication Regulation Information 243-245

3

SETTING UP OAKLEY THUMP TO PLAY MUSIC

To set up OAKLEY THUMP, first charge the battery. The battery will reach 80% charge after one
hour, but a full three-hour charge is recommended. Then with OAKLEY THUMP connected to your
computer, drag-and-drop files from your computer hard drive to the OAKLEY THUMP drive icon or
folder. OAKLEY THUMP will play song files in MP3, WMA or WAV file format.

STEP 1: CHARGE THE BATTERY.

With the USB cable, connect OAKLEY THUMP directly to your computer’s USB port. OAKLEY
THUMP will draw a small amount of electricity from your computer to charge its internal battery.
(The USB cable can also connect OAKLEY THUMP to an optional Wall Charger, or you can use your
OAKLEY THUMP Car Charger, both sold separately. See the Accessory card for more information.)
The USB cable plugs into the bottom of OAKLEY THUMP, behind the ear boom on the right side.
Be sure the earphone extender is pushed in (fully forward) to expose the Mini-B USB receptacle
in the eyewear frame. Release the protective cover from the connection port. When plugging in
the USB cable, be sure to align the plug correctly. If the plug will not go in, try flipping it over. Use
only the USB cable included with OAKLEY THUMP and be sure you have the right connection port
on your computer.

2

GETTING STARTED

OAKLEY THUMP™allows you to transfer MP3, WMA and WAV files from your computer and listen
to music anywhere. You can also use OAKLEY THUMP to backup important files and transport any
kind of file from one computer to another.
OAKLEY THUMP combines a digital music player with Oakley’s world-class sunglass technology.
Patented XYZ Optics

®

maintains critical clarity at all angles of vision, even at the periphery of
raked-back lens contours that maximize protection against sun, wind and side impact.
Lightweight O Matter

®

frame material offers all-day comfort. The flip-up lenses are made of pure

Plutonite®, a material that blocks 100% of all UVA, UVB, UVC and harmful blue light.

WHAT YOU NEED TO GET STARTED

Your OAKLEY THUMP comes with the following components:

To use OAKLEY THUMP with a Microsoft®Windows®PC, you must have:

• Windows XP, Windows 2000 or Windows ME. Windows 98SE users must download the USB Mass
Storage Device Driver from www.oakley.com/thump or call Oakley in the U.S. at 1 [phone]
and arrange to have a CD sent. Customers outside of the U.S. should contact their local corporate
office. See the end of this manual for international contact information. (Note that OAKLEY THUMP
cannot be used with Windows NT.)

• A USB 2.0 or USB 1.1 connection port

To use OAKLEY THUMP with a Macintosh

®

, you must have:

• Mac®OS 9.2.2, Mac OS 10.1.5, Mac OS 10.2 or Mac OS 10.3

• A USB 2.0 or USB 1.1 connection port

Mini-B

USB Cable

USB Connector

OAKLEY THUMP

USB PORT

5

STEP 3: DISCONNECT WITH “EJECT”.

Because your computer recognizes OAKLEY THUMP as a removable disk drive, you must “eject”
OAKLEY THUMP from the computer using a software command. Unplugging the USB cable
without ejecting OAKLEY THUMP may result in data loss.

•For Windows: In the Windows Task Bar (the row of small icons which is usually located at
the bottom right of the screen), double-click the icon for Safely Remove Hardware ( ). A list
of connected devices will appear. Select your OAKLEY THUMP from the list then click the Stop
button. Finish by clicking the Close button.

• For Macintosh: Go to the Finder and click on “File” (for OS 9, click on “Special”), then Eject

“OAKLEY THUMP.”

Alternative method:

Click on the “OAKLEY THUMP” icon on the Mac Desktop and drag it to the

“Eject” icon on the Dock. (For OS 9, Drag it to the “Trash” icon on the Desktop.)

STEP 4: PLAY MUSIC.

After OAKLEY THUMP has been properly “ejected” from your computer, disconnect the USB
cable. Adjust the earphone extenders to fit your ears. Note that the earphones pivot in and out,
and each earphone is mounted on a telescoping boom for moving forward and back. Press and
hold the

Play / Pause

button until the power-up tone is heard. THUMP will begin playing the first

song. See the Quick Reference guide for information on controls.

4

STEP 2: TRANSFER THE MUSIC FILES.

If your OAKLEY THUMP is not already attached to your computer, attach it now with the USB
cable. In Windows Explorer, OAKLEY THUMP will show up as a removable disk drive. Double-Click
the disk drive called “THUMP256” or “THUMP512”. This will show songs that come preloaded in
the OAKLEY THUMP memory.

Open a second folder window that shows the MP3, WMA or WAV music files currently stored on
your computer. (See “Transferring Music from CDs” for information on how to convert CD music
to these compressed file formats.) Now drag-and-drop the files from your hard drive folder to the
OAKLEY THUMP folder window. The songs will play back in the order in which you drag-and-drop
them. You can also play them at random. See the Quick Reference guide for more information.