3
POWER
O
N
O
FF
MIC VOLUM
E
DISCONNECT
PAIRE
D
MASTE
R
VOLUM
E
BEA
T
PARTYPOWE
R
PART Y
ROCKER
O
FF
LIGHT
MOD
E
User Guide (English)
Support
For product registration, latest product information,
and additional product support visit numark.com
WARNING: DO NOT splash or immerse in water or other liquids.
Not for use in rain. Use only in dry locations.
WARNING: DO NOT look directly into the dome light. Do not sit,
stand, or apply pressure on the dome light.
Quick Setup / Connection Diagram
1. Make sure all items listed in Box Contents at the beginning of this guide are included in the box.
2. READ SAFETY INSTRUCTION BOOKLET BEFORE USING THE PRODUCT.
3. For optimal performance, place House Party in the center of the room so it is unobstructed by walls,
furniture, etc.
4. Move Light Mode switch to OFF
5. Turn down the Master Volume on the Party Rocker.
6. Turn on Party Rocker.
7. Connect your music player with an audio cable or Bluetooth (see Connecting with a Bluetooth Device
for more details on this)
8. Adjust the volume on your music player and on Party Rocker as needed.
9. Adjust the Light Mode switch on Party Rocker as needed.
10. Turn off Party Rocker when not in use.
Diagram and Parts Description
1. Microphone Input with Volume
Control (1/4"): This mono input
accepts a 1/4" input such as a
microphone, guitar, or other
musical instrument.
2. Auxiliary input: This stereo 1/8”
input can be used to connect a
smartphone, MP3 player, or other
audio source.
3. Bluetooth®: The Paired LED will
be lit when a device is paired to
PARTY ROCKER. This LED will
not be lit when PARTY ROCKER is first powered on
(unless it was previously paired with a device). Press
the Disconnect button to disconnect a paired
Bluetooth device.
BOX CONTENTS
PARTY ROCKER
Microphone with mic cable
Audio Cable with 1/8” (3.5mm)
connectors
Power Cable (standard IEC)
User Guide
Safety Instructions & Warranty
Information Booklet
TOP PANEL
MP3 PLAYER
(not included)
MICROPHONE
REAR PANEL
POWER
*WARNING: Do not look directly into the
dome light. Do not sit, stand, or apply
pressure on the dome light.