Page 1
QUICK-START
GUIDE
NUMARK
MIXTRACK PRO III
Page 2
Installation and Setup
The Numark Mixtrack Pro III requires drivers for both Mac and Windows.
You will nd these on the installation CD that is provided with your Numark
Mixtrack Pro III, or go to http://www.numark.com
NOTE: Please ensure you have the latest available drivers AND rmware
updates, which may be required in order to be compatible with Serato DJ.
Please go to http://serato.com/support or visit the Numark website.
1. Download and install the latest version of Serato DJ from http://serato.
com/dj/downloads
2. Connect your Numark Mixtrack Pro III to an available USB Port.
3. Open Serato DJ.
Serato DJ Activation
To nd out how to activate Serato DJ by either starting your free 14 day
trial, or purchasing a license for Serato DJ, click here for the most up to
date information.
Page 3
Controller
3 4 5 6 8 9 10 1211 13
2
7
1514
16
17
1 18
24
23
2022
1921
Page 4
NOTE: The SHIFT button is used with other buttons that have shift modier functions.
# Mixtrack Pro III Serato DJ Function Shift
1 PERFORMANCE PADS SEE PERFROMANCE PAD SECTION FOR MORE INFORMATION
2 PAD MODE Change Performance Pad mode
3 PITCH NUDGE - Pitch nudge backward
4 PITCH NUDGE + Pitch nudge foreward
5 TOUCH STRIP Adjust FX parameter Skip search through track
6 SCRATCH Turn Scratch mode on for the platters
7 SHIFT Used with other controls that have shift modier functions
8 PFL CUE Enable to monitor the channel through the headphones
9 HP/LP FILTER Channel HP/LP lter
10 MASTER GAIN Adjust master output gain
11 BROWSE Scroll to browse library or crate lists. Push to go Back
12 LOAD DECK Load currently highlighted track to respective deck
13 CHANNEL EQ Adjust channel EQ
14 FX 1-3 FX 1-3 On/Off. Adjust parameters in Single FX mode. FX select
15 BEATS MULTIPLIER Adjust beats multiplier timing. Tap tempo.
16 PLATTER Adjust currently loaded track
17 TEMPO FADER Adjust playback tempo of currently loaded track
18 PLAY/PAUSE Play or pause currently loaded track Stutter play
19 CUE Set/play from temporary cue
20 CUE MIX Adjust Cue Mix
21 CROSSFADER Fade audio between channels
22 CUE GAIN Adjust headphone volume
23 CHANNEL FADER Adjust channel volume
24 SYNC SYNC On SYNC Off
Page 5
1 2
3 4
5
# Numark Mixtrack Pro III Function
1 1/4” HEADPHONES Connect your 1/4” headphones to this output for cueing
2 1/8” HEADPHONES Connect your 1/8” headphones to this output for cueing
3 MIC GAIN Adjust the input volume of the Mic
4 MIC Connect an TRS or 1/4” jack microphone to this input
5 MASTER RCA OUTPUT Use standard RCA cables to connect this output to a speaker or powered monitors
6 USB Connect USB cable to this port from computer
6
Page 6
Performance Pads
DJ-FX
The DJ-FX in Serato DJ are powered by iZotope™. Click the FX tab
to open the FX panel. Select either 1, 2 or M to assign the
selected effect bank to a deck or Master Output.
There are two available modes in the DJ-FX. Single FX Mode allows you
to select one effect per FX bank, and has multiple parameters that can be
adjusted. Multi FX Mode allows you to select up to three effects per FX bank,
and adjust only one parameter, the FX Depth. The same effects available
in Single FX mode are available in Multi FX mode, as well some additional
presets.
The bottom row of pads is dedicated to Cue Points:
• CUES 1-4: Pressing the bottom 4 pads will add and play up to 4 Cue
Points. Holding SHIFT and pressing a pad will delete the specic Cue
Points.
The top row of performance pads have different modes you can select. They
are Manual Loop mode, Auto Loop mode and Sampler mode. Hold the PAD
MODE button and press pads 1-3 to enable each performance pad mode.
• AUTO 1/Manual Loop mode: Pressing pad 1 will start and set a Manual
Loop In point, pad 2 will set the Loop Out point and pads 3 and 4 will
turn the Loop On/Off and Retrigger the loop.
• AUTO 2/Auto Loop mode: When pressing pads 1-4 you can activate Auto
Loops of different sizes. Hold Shift and press pads 1-4 to enable Loop
Rolls of that size.
• AUTO 3/Sampler Mode: Pads 1-4 will trigger samples loaded in slots 1-4
of your Sample Banks. Holding SHIFT and pressing pads 1-4 will stop
the sample playing. When a sample slot is empty, pressing the pads
1-4 will load the currently selected track in library to the corresponding
sample slot.
You can select between the two FX modes by clicking either the Single FX
mode button or Multi FX mode button in the software.
Mixtrack
Pro III
Control
FX 1 Turn FX slot On Turn FX slot 1 On Select next FX in slot
FX 2 Adjust FX
FX 3 Adjust FX
TAP Tap DJ-FX tempo Tap DJ-FX tempo Change FX mode
BEATS Adjust beats
TOUCH
STRIP
Single FX Mode Multi FX Mode Shift
(Multi FX only)
Turn FX slot 2 On Select next FX in slot
parameter 1
Turn FX slot 3 On Select next FX in slot
parameter 2
Adjust beats
timing multiplier
Adjust FX depth Adjust FX depth Skip search track
timing multiplier
(Multi) FX only
(Multi FX only)
(Single/Multi)
N/A
Page 7
MIDI
Using the Tool Tips
The MIDI feature in Serato DJ provides the ability to remap Serato DJ
software functions to your primary Serato DJ controller, interface or mixer.
You can also assign controls to a secondary MIDI controller to further
enhance your performance.
For more information on MIDI mapping with Serato DJ click here.
To remap your supported Serato DJ device, open the SETUP screen and
click the MIDI tab. If your Serato DJ device supports hardware remapping it
will show up in the MIDI Devices list at the top.
Select your connected device from the MIDI Devices list and make sure the
“Allow Serato Hardware Remapping” option is checked.
Once checked, the MIDI assign button at the top of the screen will become
available for you to start remapping.
You can save, edit or delete MIDI presets in the MIDI tab of the SETUP
screen. Clicking ‘Restore Defaults’ will erase any custom mappings for all
connected devices and revert their functions back to default.
Download the Serato DJ software manual for further information.
NOTE: Ofcial Serato Accessories do not currently support user remapping.
Hardware features that cannot be remapped at this stage are Jogwheels/
Platters, Input Switches, Shift buttons and Performance Pad Mode buttons.
Re-mapping any pad(s) in Hot Cue mode will also re-map the same pad in
Saved Flip mode and vice versa.
Click on the icon to enable Tool Tips. This is located in between
the MIDI and setup button in the top right hand corner of the screen.
Tool Tips provide a handy way to learn the various features of Serato
DJ.
Move the mouse over a section of the screen to bring up a context
sensitive tool tip. Holding the mouse over the button with Tool
Tips turned on will show you a list of all keyboard shortcuts.
For more information about how to use Serato DJ, please go to our
website www.serato.com or refer to the Serato DJ Software Manual.
For more information on your controller, please refer to the hardware
manual.
For further help, please contact support@serato.com or go to
www.serato.com/support
Loading...