N-TRON 716TX Data Sheet

THE INDUSTRIAL NETWORK COMPANY

The N-TRON

® 716TX Industrial Ethernet switch combines
outstanding performance and ease of use. It is ideally suited for
connecting Ethernet enabled industrial and/or security equipment
and is a fully managed switch.

PRODUCT FEATURES

• Sixteen 10/100BaseTX RJ-45 Ports

• -40

• ESD and Surge Protection Diodes on all Ports

• Auto Sensing 10/100BaseTX, Duplex, and MDIX

• Store-and-forward Technology

• Rugged DIN-Rail Enclosure

• Redundant Power Inputs (10-30VDC)

• Confi gurable Alarm Contact & Bi-Color Fault Status LED

o

C to 70oC Operating temperature

Fully Managed Features:

• SNMP v1, v2, v3 and Web Browser Management

• Detailed Ring Map and Fault Location Charting

• N-Ring

• N-View

• N-Link

• Plug-and-play IGMP Support

• 802.1Q tag VLAN and Port VLAN

• 802.1p QoS and Port QoS

™

Technology with ~30ms Healing

™

OPC Monitoring

™

Redundant N-Ring Coupling

• EtherNet/IP™ CIP Messaging

• LLDP (Link Layer Discovery Protocol)

• Port Trunking

• Port Mirroring

• 802.1d, 802.1w, 802.1D RSTP

• DHCP Server, Option 82 relay, Option 61, IP Fallback

• Port Security—MAC Address Based

Management Features

The 716TX offers several management functions that can be easily
confi gured using a web browser.

IGMP Snooping - Internet Group Management Protocol is a feature that
allows the

VLAN - V irtual Local Area Network allows you to segment the switch
in order to create two or more separate local area network domains.

QoS - Quality of Service provides prioritization of network traffi c
in order to provide better network service. The primary goal of QoS
is to improve the latency of prioritized Ethernet packets required
for ring management, real-time, and other interactive applications.

Port Trunking - Trunking (link aggregation) enables multiple
physical ports to be linked together and function as one uplink to
another
manner, thereby increasing the bandwidth between switches. This
configuration can provide increased bandwidth and redundancy
to applications requiring high levels of fault tolerant operation.

Port Mirroring - This function allows the traffi c on one port to be
duplicated and sent to a designated mirror port. Port mirroring can be
used to monitor Ethernet traffi c on the designated source port using
the assigned mirror port.

DHCP-DHCP Server / Client automates the assignment of IP addresses.
DHCP Option 82 assures that if a device on a specifi c port is replaced,
the replacement receives the same IP address as the original device.

716TX

N-TRON

switch to forward and fi lter multicast traffi c intelligently.

trunking capable switch confi gured in the same

Rapid Spanning Tree Protocol

RSTP allows the switch to be confi gured in a ring or mesh topology,
and provides support for redundant path communications with high
speed (rapid) healing.

Remote Monitoring Options

For ease of confi guration and monitoring, the
browser management and N-View OLE for process control (OPC)
server software. The
popular HMI software packages to add network traffi c monitoring,
trending, and alarming to any application using
addition, SNMP is available for switch link and status monitoring. The
alarm contact and status LED can be confi gured to respond to power
failure on power input 1 or input 2,
high, partial break low, or if multiple ring managers are detected.

N-TRON N-View software can be combined with

N-Ring broken, partial break

716TX offers web

N-TRON switches. In

N-Ring Technology

N-TRON's 716TX

offers expanded ring size capacity, detailed fault diagnostics, and a
standard healing time of ~30ms. The
checks the health of the ring via packets. If the ring manager stops
receiving these health check packets, it converts the ring to a linear
topology within ~30ms.

ring manager using N-TRON's N-Ring technology

716TX ring manager periodically

When all switches in the ring are N-TRON
fully managed switches, a detailed ring map and fault location chart
will also be provided on the ring manager’s web browser and OPC
server to identfy the health status of the ring.

linking of two
can participate in

Industrial Packaging and Specifi cations

The

716TX is designed to operate in industrial environments. It is

housed in a rugged steel DIN-Rail enclosure. It has extended industrial
specifi cations and features to meet or exceed the operating parameters
of connected equipment. These include extended temperature ratings,
extended shock and vibration specs, redundant power inputs, and high
MTBF (greater than 2M hours).

Ease of Use

The 10/100BaseTX ports are auto sensing and auto confi guring.
Each copper port is automatically negotiated for maximum speed and
performance by default, but can also be hard coded through the user
interface. A high speed processor allows wire speed capability on all
100BaseTX ports simultaneously.

N-Ring. Up to 250 fully managed N-TRON

N-Ring topologies.

N-Link

™ allows the

switches

THE INDUSTRIAL NETWORK COMPANY

716TX Specifi cations
Switch Properties

Number of MAC Addresses: 8000
Aging Time: Programmable
Latency Typical: 2.6 μs
Switching Method: Store-and-Forward

Case Dimensions

Height: 2.3" (5.8 cm)
Width: 8.3" (21.0 cm)
Depth: 4.8" (12.1 cm)
Weight (max): 3.3 lbs (1.5 kg)
DIN-Rail Mount: 35mm

Electrical

Redundant Input Voltage: 10-30 VDC (Regulated)
Input Current (max): 620mA max. @ 24VDC
BTU/hr: 50.8@24VDC
N-TRON Power Supply: NTPS-24-1.3 (1.3A@24V)

Environmental

Operating Temperature: -40
Storage Temperature: -40
Operating Humidity: 5% to 95%

(Non Condensing)

Operating Altitude: 0 to 10,000 ft.

o

C to 70oC

o

C to 85oC

Network Media

10BaseT: >Cat3 Cable
100BaseTX: >Cat5 Cable

Connectors

10/100BaseTX: Sixteen (16) RJ-45 Copper

Ports

Recommended Wiring Clearance

Front: 4" (10.16 cm)
Side: 1" (2.54 cm)

Regulatory Approvals

FCC Title 47, Part 15, Subpart B - Class A;
ICES-003 - Class A

UL Listed (US and Canada) 1604; ANSI/ISA-12.12.01-2007
Class I, Div 2, Groups A, B, C, D, and T4A

CE: EN61000-6-2:2001: EN61000-4-2, 3, 4, 5, 6
EN5501 1:1998+A1:1999+A2:2002-Class A
EN50155 for Railway applications
GOST-R Certifi ed, RoHS Compliant

Shock and Vibration (bulkhead mounted)

Shock: 200g @ 10ms
Vibration/Seismic: 50g, 5-200Hz, Triaxial

Designed to comply with:

IEEE 1613 for Electric Utility Substations
NEMA TS1/ TS2 for Traffi c control

Reliability

MTBF: >2 Million Hours

Contact Information

N-TRON Corp. N-TRON Asia N-TRON Europe GmbH
820 S. University Blvd., Suite 4E Suite #: 2267, 22/F, One Lujiazui Alte Steinhauserstr 19
Mobile, AL 36609 USA 68 Yin Cheng Road Center, 6330 Cham / Zg Switzerland
TEL: [phone] Pudong New Area TEL: [phone]
FAX: [phone] 200120 Shanghai, P.R. China FAX: [phone]
Website: www.N-TRON.com Phone: [phone]
Email: [e-mail] Fax: [phone]

® 2010 N-TRON, Corp. N-TRON and the N-TRON logo are trademarks of N-TRON, Corp. Product names mentioned herein are for identifi cation purposes only and may be
trademarks and/or registered trademarks of their respective company. Specifi cations subject to change without notice. The responsibility for the use and application of N-TRON
products rests with the end user. N-TRON makes no warranties as to the fi tness or suitability of any N-TRON product for any specifi c application. N-TRON
be liable for any damage resulting from the installation, use, or misuse of this product. Printed in USA.

REV 100408

Corporation shall not