Item# 109088
8-Gallon Air-Operated Oil Changer
User’s Manual
Assembly and Operation Instructions
MADE IN CHINA
For technical questions and replacement parts, please call 1-800-556-7885.
Thank you very much for choosing a NORTHERN TOOL & EQUIPMENT CO., Product! For future reference, please complete the owner’s record below:
Model: _______________ |
Purchase Date: _______________ |
Save the receipt, warranty and these instructions. It is important that you read the entire instruction sheet to become familiar with this product before you begin using it.
This machine is designed for certain applications only. Northern Tool & Equipment strongly recommends that this machine is not modified and/or used for any application other than that for which it was designed. If you have any questions relative to a particular application, DO NOT use the machine until you have first contacted Northern Tool & Equipment to determine if it can or should be performed on the product.
Before using this product, please read the following instructions carefully.
WARNING!
Do not extract caustic or flammable products. Do not expose the reservoir to any source of heat. While extracting high temperature oils, keep hands and face protected. Only use the device for the purpose for which it has been designed. Do not modify any component of the equipment. Only use original spare parts. Our technical office is at your full disposal for any information you may need.
ATTENTION!
Some cars have a built-in oil suction probe. In this case, connect the coupler of the oil changer B directly to the probe. For other makes of car (Volkswagen and BMW) equipped with a built-in probe having a different opening, connector(C-Volkswagen, D-BMW) must be used.
OPERATION
Fig.1 Close the suction valve (ball valve) A.
Hand tighten the drain cap B.
1
Loading...