Nortel Networks BSR252 User Manual

BSR252_QIG_1.pdf 12/21/2006 10:24:58 AM

Step 8

Business Secure Router 252

BSR252

Assign TCP/IP addresses

Quick Install Guide

Detailed documentation for this Quick Installation Guide can be downloaded at www.nortel.com.

1. Contact your Internet Service Provider (ISP) to get the

following information:

CMY

Steps 4 7

Install the hardware

4. Mount the

BSR252 on a wall, or place it horizontally or vertically (using the supplied holder) on a flat surface.

a. Encapsulation type b. Multiplex Mode, VPI, VCI c. ISP IP addresses: WAN, DNS servers, Gateway, and WAN

MAC address

2. Get your Domain Name from the User

Accounts dialog box in the Control Panel.

3. (Optional) Get the IP addresses of DNS

and remote servers on your LAN.

For details, see your operating system Help files. Get your Computer Name from the System Properties dialog box on your computer.

Steps 1 4

Before you start

8. Set up the IP addresses on each computer connected to the BSR252: a. Set each computer to dynamically obtain an IP address, or assign unique static

IP addresses. If you choose to assign unique static IP addresses for each computer, choose IP addresses between 192.168.1.129 and 192.168.1.254.

b. If you assign a static IP address in step 8a, assign a subnet mask of

255.255.255.0 and a default gateway of 192.168.1.1.

c. If you chose to dynamically obtain IP addresses in step 8a, you have an option

of using Obtain a DNS server address automatically, or assigning the DNS server IP addresses.

d. If you chose to assign unique static IP addresses in step 8a, you must assign

DNS Server IP addresses.

Steps 9 12

Access the BSR252

9. In the address field of your browser, enter

192.168.1.1

10. Enter the default

user name (nnadmin) and password (PlsChgMe!) to log onto the BSR252.

11. You can replace the default password (recommended)

or use it as it is.

12. Replace the factory-default

Steps 13 16

Start the wizard

certificate.

15. From the first Wizard window, choose the type of encapsulation and service

that your ISP supplies. The wizard displays different windows for each type of encapsulation and service.

16. Depending on the type of encapsulation that your ISP

PPP over ADSL (PPPoA)

Enter the User Name and Password assigned by your ISP, and enter 100 seconds in the Idle Timeout field. Click the Nailed-Up Connection option to keep the connection active. In the Network Address Translation list, select SUA Only.

RFC 1483

Enter the IP Address and Password assigned by your ISP. In the Network Address Translation list, select SUA Only.

ENET ENCAP (Ethernet)

If you have a dynamic WAN IP address, select Obtain an IP Address Automatically; otherwise, select Static IP Address and type your ISP assigned WAN IP address and the subnet mask in the fields provided. In the ENET ENCAP Gateway field, enter the gateway IP address given by your ISP.

PPP over Ethernet (PPPoE)

Enter the Service Name, User Name and Password assigned by your ISP, and enter 100 seconds in the Idle Timeout field. Click the Nailed-Up Connection option to keep the connection active.

Steps 17 18

uses, enter the following information:

Complete your configuration

17. Review your settings.

18. Click Save Settings.

Steps 19 20

Testing your Internet connection

5. Connect your PC and up to three other

computers or network devices to the four Ethernet ports.

6. Connect your ADSL Internet service to the

telephone port next to the Power LED.

7. Snap the appropriate power clip

into the supplied power adapter. Connect the power adapter to the rear of the BSR252 and to an AC power source.

N0143490

13. On the left

navigation pane, click Wizard.

14. In the General Setup window, enter the system name (your computer

name) and the domain name.

19. To confirm the ADSL

connection, click the Start Diagnose button. This test takes approximately 20 seconds. If this test fails, confirm steps 1-18, and contact your service provider.

20. Test your connection to the Internet by opening your browser and

visiting a known Web site.