Page 1
Model No. 831.15718.0
Visit our website at
www.proform.com
new products, prizes,
fitness tips, and much more!
Visit our website at
www.healthrider.com
new products, prizes,
fitness tips, and much more!
Visit our website at
www.nordictrack.com
new products, prizes,
fitness tips, and much more!
Serial No.
Write the serial number in the
space above for future reference.
Serial Number Decal (under seat)
QUESTIONS?
As a manufacturer, we are committed to providing complete customer
satisfaction. If you have questions,
or if parts are missing, PLEASE DO
NOT CONTACT THE STORE;
please contact Customer Care.
USER’S MANUAL
IMPORTANT: You must note the
product model number and
serial number (see the drawing
above) before contacting us:
CALL TOLL-FREE:
1-888-825-2588
Mon.–Fri. 6 a.m.–6 p.m. MST
Sat. 8 a.m.–4 p.m. MST
ON THE WEB:
www.nordictrackservice.com
CAUTION
Read all precautions and instructions in this manual before using
this equipment. Save this manual
for future reference.
Page 2
TABLE OF CONTENTS
ARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
W
MPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
I
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
PART IDENTIFICATION CHART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
EXERCISE GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover
WARNING DECAL PLACEMENT
The decals shown here have been applied in the locations
shown. If a decal is missing or illegible, call the tele-
phone number on the front cover of this manual and
request a free replacement decal. Apply the decal in
the location shown.
at actual size.
Note: The decals may not be shown
NordicTrack is a registered trademark of ICON IP, Inc.
2
Page 3
IMPORTANT PRECAUTIONS
WARNING: To reduce the risk of serious injury, read all important precautions and
nstructions in this manual and all warnings on your weight bench before using your weight bench.
i
ICON assumes no responsibility for personal injury or property damage sustained by or through
the use of the weight bench.
1. Before beginning any exercise program, consult your physician. This is especially important for persons over the age of 35 or persons with pre-existing health problems.
2. Use the weight bench only as described in
this manual.
It is the responsibility of the owner to ensure
3.
that all users of the weight bench are adequately informed of all precautions.
4. The weight bench is intended for home use
only. Do not use the weight bench in a commercial, rental, or institutional setting.
5.
Keep the weight
moisture and dust. Place the weight
on a level surface, with a mat beneath it to
protect the floor or carpet. Make sure that
there is enough clearance around the weight
bench
6. Keep children under age 12 and pets away
from the weight bench at all times.
to mount, dismount, and use it.
bench
indoors, away from
bench
7.
Inspect and properly tighten all parts regularly. Replace any worn parts immediately.
8. Make sure that the pins and knobs are fully
engaged before the weight bench is used.
9.
Wear appropriate clothes while exercising.
Always wear athletic shoes for foot protection while exercising.
10.
The weight bench is designed to support a
maximum user weight of 300 lbs. (136 kg)
and a maximum total weight of 610 lbs. (277
kg). Do not place more than 310 lbs. (141 kg),
including a barbell, on the weight rests. Do
not place more than 150 lbs. (68 kg) on the
leg lever. Note: The weight bench does not
include a barbell or weights. The weight
bench is designed to be used only with
Olympic weights.
11. If you feel pain or dizziness at any time while
exercising, stop immediately and begin cooling down.
3
Page 4
BEFORE YOU BEGIN
Thank you for selecting the versatile NordicTrack
E6900 COMPETITION SERIES weight bench. The
weight bench offers a selection of exercise stations
designed to develop every major muscle group of the
body. Whether your goal is to tone your body, build
dramatic muscle size and strength, or improve your
cardiovascular system, the weight bench will help you
to achieve the specific results you want.
For your benefit, read this manual carefully before
using the weight bench. If you have questions after
Weight Rest
Right Side
Safety Spotter
®
reading this manual, see the front cover of this manual. To help us assist you, please note the product
model number and serial number before contacting us.
The model number and the location of the serial number decal are shown on the front cover of this manual.
Before reading further, please review the drawing
below and familiarize yourself with the parts that are
labeled.
ASSEMBLED DIMENSIONS:
Height: 62 in. (158 cm)
Width: 52 in. (132 cm)
Depth: 86 in. (219 cm)
Weight: 158 lbs. (72 kg)
Upright Pin
Backrest
Curl Pad
Curl Bar
Leg Lever
Curl Bar Pin
Weight Clip
Note: The terms “right side” and “left side” are determined relative to a person sitting with his
back to the backrest; they do not correspond to right and left on the drawings in this manual.
Left Side
Weight
Storage Tube
Seat Carriage Knob
Seat
4
Page 5
M10 x 125mm Screw (53)
M10 x 120mm Bolt (57)
M4 x 25mm Self-
tapping Screw (54)
M10 Washer (65)
M10 Nylon Locknut (67)
M6 Washer (70)
M8 Nylon Locknut (66)
M12 x 90mm Bolt (62)
M8 x 60mm Bolt (58)
M14 x 180mm Bolt (60)
M10 x 111mm Bolt Set (63)
M10 x 65mm Screw (56)
M14 Washer (68)
M6 x 16mm Screw (51)
M6 x 65mm Screw (59)
M14 Nylon Locknut (50)
M12 Nylon Locknut (64)
PART IDENTIFICATION CHART
See the drawings below to identify small parts used in assembly. The number in parentheses by each drawing is
the key number of the part, from the PART LIST near the end of this manual. Note: Some small parts may
have been preattached. If a part is not in the parts bag, check to see if it has been preattached.
5
Page 6
ASSEMBLY
Make Assembly Easier
Everything in this manual is designed to ensure
that the weight bench can be assembled successfully by almost anyone. By setting aside
plenty of time, assembly will go smoothly.
Before beginning assembly, carefully read the following information and instructions:
• Assembly requires two persons.
• Because of its size, the weight bench should be
assembled in the location where it will be used.
Make sure that there is enough clearance to walk
around the weight bench as you assemble it.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
• For help identifying small parts, use the PART
DENTIFICATION CHART on page 5.
I
As you assemble the weight bench, make sure all
•
parts are oriented as shown in the drawings.
• Tighten all parts as you assemble them, unless
instructed to do otherwise.
• Assembly requires the included hex key(s)
and the following tools (not included):
two adjustable wrenches
one rubber mallet
one standard screwdriver
one Phillips screwdriver
Assembly may be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
1.
Before beginning assembly, make sure
that you understand the information in the
box above.
Identify the Left Upright (4), which is marked with
an “L” sticker. Attach a Weight Tube Sleeve (37)
and a Weight Tube (33) to the Left Upright with
an M10 x 125mm Screw (53).
Attach the other Weight Tube Sleeve (37) and
eight T
W
the same way.
ube (33) to the Right Upright (5) in
1
33
5
37
4
33
37
53
6
Page 7
2. Orient the Left Upright (4) as shown. Attach the
Left Upright to the Cross Frame (2) with two M10
125mm Screws (53) and two M10 Washers
x
(65).
2
Attach the Right Upright (5) to the Cross
Frame (2) in the same way.
3. Orient the Seat Carriage (13) and the Frame (1)
as shown, and slide the Seat Carriage onto the
Frame.
Next, pull the Seat Carriage Knob (44), slide the
Seat Carriage (13) to the desired position, and
engage the Seat Carriage Knob into one of the
adjustment holes in the Frame (1).
5
4
2
65
53
3
13
44
4. Attach the Front Leg (3) to the Frame (1) with two
M10 x 125mm Screws (53) and two M10 Washers
(65).
1
4
65
53
3
53
1
7
Page 8
. Attach the Frame (1) to the Cross Frame (2) with
5
two M10 x 65mm Screws (56), two M10 Washers
(65), two M10 x 120mm Bolts (57), and two M10
Nylon Locknuts (67).
See the inset drawing. Attach the Backrest
Bumper (36) to the Cross Frame (2) with an M4 x
25mm Self-tapping Screw (54).
5
67
65
56
5
6
6. Attach the Backrest (18) to the Backrest Frame
(6) with two M6 x 16mm Screws (51), an M6 x
65mm Screw (59), and an M6 Washer (70).
1
57
54
2
6
18
36
2
70
59
6
7. Apply some of the included grease to an M14 x
ubes (7)
180mm Bolt (60). Orient the two Pivot
as shown. Attach the Pivot Tubes to the Backrest
Frame (6) with the Bolt, two M14 Washers (68),
and an M14 Nylon Locknut (50).
tighten the Nylon Locknut; the Pivot Tubes
must pivot easily.
T
Do not over-
7
Grease
60
51
68
7
18
68
50
6
7
8
Page 9
. Grease an M14 x 180mm Bolt (60). Attach the
8
Pivot Tubes (7) to the Frame (1) with the Bolt, two
M14 Washers (68), and an M14 Nylon Locknut
(50). Do not overtighten the Nylon Locknut;
the Pivot Tubes must pivot easily.
8
18
Grease an M12 x 90mm Bolt (62). Attach the
Backrest Frame (6) to the Seat Carriage (13) with
he Bolt and an M12 Nylon Locknut (64). Do not
t
overtighten the Nylon Locknut; the Backrest
Frame must pivot easily.
9. Attach the Seat (19) to the Seat Frame (12) with
two M6 x 16mm Screws (51), an M6 x 65mm
Screw (59), and an M6 Washer (70).
Grease
68
60
7
6
64
1
Grease
13
9
19
70
68
50
62
12
10. Grease an M12 x 90mm Bolt (62). Attach the
Seat Frame (12) to the Seat Carriage (13) with
the Bolt and an
tighten the Nylon Locknut yet.
See the inset drawing. Attach two 12.7mm x
4.5mm Spacers (69) to the Seat Carriage (13)
and the Seat Frame (12) with two M4 x 25mm
Self-tapping Screws (54). Then, tighten the
Nylon Locknut
overtighten the Nylon Locknut; the Seat
Frame must pivot easily.
M12 Nylon Locknut
(64) used in this step. Do not
(64). Do not
M12
10
12
51
64
54
69
12
59
13
Grease
62
69
13
54
9
Page 10
11. Slide the Weight Stop (32) onto the post on the
Leg Lever (11). Next, tighten the Weight Tube
(33) onto the post. Then, attach the Weight Clip
(46) to the Weight Tube.
Next, grease the outside of the barrel of an M10 x
11mm Bolt Set (63). Attach the Leg Lever (11) to
1
the Front Leg (3) with the Bolt Set. Make sure
that the barrel of the Bolt Set is inserted
through both sides of the bracket on the Front
Leg.
11
46
33
1
32
63
3
1
Grease
63
12. Insert the Long Pad Tube (8) into the Front Leg
(3). Slide two Foam Pads (21) onto the Long Pad
Tube. Then, press a Pad Cap (22) into each
Foam Pad.
13. Insert the two Short Pad Tubes (15) into the Leg
Lever (11). Slide two Foam Pads (21) onto each
Short Pad Tube. Then, press a Pad Cap (22) into
each Foam Pad.
12
13
22
21
22
21
21
11
3
21
8
15
21
22
10
15
22
22
21
Page 11
14. Slide a Safety Spotter (17) onto the Right Upright
(5) as shown. Insert the attached Upright Pin (41)
nto the Safety Spotter and one of the adjustment
i
holes in the Right Upright. Next, slide a Weight
est (16) onto the Right Upright. Insert the
R
attached Upright Pin (41) into the Weight Rest
and one of the adjustment holes in the Right
Upright.
14
41
16
5
Attach the other Safety Spotter (17) and the
other Weight Rest (16) to the Left Upright (4)
in the same way. Always set both Safety
Spotters at the same height and both Weight
Rests at the same height.
15. Attach the Curl Bar Cap (30) to the Curl Frame
(10) with an M8 x 60mm Bolt (58) and an M8
Nylon Locknut (66).
15
17
10
41
66
16
4
17
30
58
16. Attach the Curl Pad (20) to the Curl Post (9) with
two M6 x 16mm Screws (51).
17. Make sure all parts are properly tightened before you use the weight bench. The use of the remaining
parts will be explained in ADJUSTMENT, beginning on page 12.
16
20
9
51
11
Page 12
ADJUSTMENT
This section explains how to adjust the weight bench. See the EXERCISE GUIDELINES on page 15 for impor-
ant information about how to get the most benefit from your exercise program. Also, see the accompanying
t
exercise guide to see the correct form for several exercises.
Properly tighten all parts each time you use the weight bench. Replace any worn parts immediately. To clean the
eight bench, use a damp cloth and a mild, non-abrasive detergent; do not use solvents.
w
ADJUSTING THE SEAT AND THE BACKREST
To adjust the position of the Seat (19) and the
Backrest (18), pull the Seat Carriage Knob (44), slide
the Seat Carriage (13) to the desired position, and
then release the Seat Carriage Knob.
Carriage back and forth slightly to make sure that
it is engaged in one of the adjustment holes in the
Frame (1).
USING YOUR WEIGHTS
To use the Leg Lever (11), slide the desired weights
(not included) onto the Weight Tube (33). Secure the
weights with the Weight Clip (46). Note: The weight
bench is designed to be used only with Olympic
weights.
Move the Seat
4, 5
33
18
19
1
44
13
WARNING: Do not put more than
150 lbs. (68 kg) on the Leg Lever (11). Always
secure weights with the Weight Clip (46).
See the inset drawing. Unused weights can be stored
on the Weight Tubes (33) on the bases of the
Uprights (4, 5).
12
Weight
46
11
33
Page 13
ATTACHING THE CURL PAD
To use the Curl Pad (20), insert the Curl Post (9) into
the Front Leg (3). Secure the Curl Post with the Curl
Knob (40). Firmly tighten the Curl Knob.
ATTACHING THE CURL BAR
Attach the Curl Frame (10) to the Leg Lever (11) with
the Curl Bar Pin (45).
10
20
0
9
4
3
11
45
13
Page 14
ADJUSTING THE SAFETY SPOTTERS AND THE
WEIGHT RESTS
Before using your barbell (not included), set the
afety Spotters (17) at the lowest point to which you
S
want your barbell to move. Note: The weight bench is
designed to be used only with Olympic weights.
To adjust each Safety Spotter (17), hold the Safety
Spotter and pull out the attached Upright Pin (41).
Move the Safety Spotter to the desired height, and
insert the Upright Pin into the Safety Spotter and one
of the adjustment holes in the Upright (4 or 5).
Adjust the two Weight Rests (16) in the same way.
WARNING: Always adjust both
Safety Spotters (17) to the same height and
both Weight Rests (16) to the same height.
Do not put more than 310 lbs. (141 kg) on the
Weight Rests or the Safety Spotters.
17
41
16
5
41
16
4
17
14
Page 15
EXERCISE GUIDELINES
THE FOUR BASIC TYPES OF WORKOUTS
Muscle Building
To increase the size and strength of your muscles,
push them close to their maximum capacity. Your muscles will continually adapt and grow as you progressively increase the intensity of your exercise. You can
adjust the intensity level of an individual exercise in
two ways:
• by changing the amount of resistance used
• by changing the number of repetitions or sets per-
formed. (A “repetition” is one complete cycle of an
exercise, such as one sit-up. A “set” is a series of
repetitions.)
The proper amount of resistance for each exercise
depends upon the individual user. You must gauge
your limits and select the amount of resistance that is
right for you. Begin with 3 sets of 8 repetitions for each
exercise you perform. Rest for 3 minutes after each
set. When you can complete 3 sets of 12 repetitions
without difficulty, increase the amount of resistance.
Toning
You can tone your muscles by pushing them to a moderate percentage of their capacity. Select a moderate
amount of resistance and increase the number of repetitions in each set. Complete as many sets of 15 to
20 repetitions as possible without discomfort. Rest for
1 minute after each set. Work your muscles by completing more sets rather than by using high amounts of
resistance.
The combination of strength training and aerobic exercise will reshape and strengthen your body, plus develop your heart and lungs.
PERSONALIZING YOUR EXERCISE PROGRAM
Determining the appropriate length of time for each
workout, and the numbers and repetitions and sets to
complete, is an individual matter. Avoid overdoing it
during the first few months of your exercise program.
Progress at your own pace and be sensitive to your
body’s signals. If you experience pain or dizziness
while exercising, stop immediately and cool down.
Find out what is wrong before continuing. Remember
that adequate rest and a proper diet are important factors in any exercise program.
WARMING UP
Begin each workout with 5 to 10 minutes of stretching
and light exercise to warm up. Warming up prepares
your body for more strenuous exercise by increasing
circulation, raising your body temperature and delivering more oxygen to your muscles.
WORKING OUT
Each workout should include 6 to 10 different exercises. Select exercises for every major muscle group,
emphasizing areas that you want to develop most. To
give balance and variety to your workouts, vary the
exercises from session to session.
Weight Loss
To lose weight, use a low amount of resistance and
increase the number of repetitions in each set.
Exercise for 20 to 30 minutes, resting for a maximum
of 30 seconds between sets.
Cross-training
Cross-training is an ef
and well-balanced fitness program. An example of a
balanced program is:
Plan strength training workouts on Monday
•
Wednesday, and Friday.
Plan 20 to 30 minutes of aerobic exercise, such as
•
running on a treadmill or riding on an exercise cycle,
on Tuesday and Thursday.
• Rest from both strength training and aerobic exercise
for at least one full day each week to give your body
time to regenerate.
ficient way to get a complete
,
Schedule your workouts for the time of day when your
energy level is the highest. Each workout should be
followed by at least one day of rest. Once you find the
schedule that is right for you, stick with it.
EXERCISE FORM
Maintaining proper form is an essential part of an
effective exercise program. This requires moving
through the full range of motion for each exercise, and
moving only the appropriate parts of the body
Exercising in an uncontrolled manner will leave you
feeling exhausted. On the exercise guide accompany
ing this manual you will find photographs showing the
correct form for several exercises, and a list of the
muscles affected. See the muscle chart on page 16 to
find the names of the muscles.
.
15
-
Page 16
The repetitions in each set should be performed
O
P
Q
R
S
T
U
V
X
W
N
M
J
G
F
H
I
K
E
C
D
B
A
L
MUSCLE CHART
A. Sternomastoid (neck)
B. Pectoralis Major (chest)
C. Biceps (front of arm)
D. Obliques (waist)
E. Brachioradials (forearm)
F. Hip Flexors (upper thigh)
G. Abductor (outer thigh)
H. Quadriceps (front of thigh)
I. Sartorius (front of thigh)
J. Tibialis Anterior (front of calf)
K. Soleus (front of calf)
L. Anterior Deltoid (shoulder)
M. Rectus Abdominus (stomach)
N. Adductor (inner thigh)
O. Trapezius (upper back)
P. Rhomboideus (upper back)
Q. Posterior Deltoid (shoulder)
R. Triceps (back of arm)
S. Latissimus Dorsi (mid back)
T. Spinae Erectors (lower back)
U. Gluteus Medius (hip)
V. Gluteus Maximus (buttocks)
W. Hamstring (back of leg)
X. Gastrocnemius (back of calf)
smoothly and without pausing. The exertion stage of
ach repetition should last about half as long as the
e
return stage. Proper breathing is important. Exhale
uring the exertion stage of each repetition and inhale
d
during the return stroke. Never hold your breath.
Rest for a short period of time after each set. The
ideal resting periods are:
• Rest for three minutes after each set for a muscle
building workout.
• Rest for one minute after each set for a toning work-
out.
• Rest for 30 seconds after each set for a weight loss
workout.
Plan to spend the first couple of weeks familiarizing
yourself with the equipment and learning the proper
form for each exercise.
COOLING DOWN
nd each workout with 5 to 10 minutes of stretching.
E
Include stretches for both your arms and legs. Move
lowly as you stretch and do not bounce. Ease into
s
each stretch gradually and go only as far as you can
without strain. Stretching at the end of each workout
is an effective way to increase flexibility.
STAYING MOTIVATED
For motivation, keep a record of each workout. List the
date, the exercises performed, the resistance used,
and the numbers of sets and repetitions completed.
Record your weight and key body measurements at
the end of every month. The key to achieving the
greatest results is to make exercise a regular and
enjoyable part of your everyday life.
16
Page 17
NOTES
17
Page 18
PART LIST—Model No. 831.15718.0 R
Key No. Qty. Description Key No. Qty. Description
0807A
1 1 Frame
2 1 Cross Frame
3 1 Front Leg
4
5 1 Right Upright
6 1 Backrest Frame
7 2 Pivot Tube
8 1 Long Pad Tube
9 1 Curl Post
10 1 Curl Frame
11 1 Leg Lever
12 1 Seat Frame
13 1 Seat Carriage
14 1 Curl Bar
15 2 Short Pad Tube
16 2 Weight Rest
17 2 Safety Spotter
18 1 Backrest
19 1 Seat
20 1 Curl Pad
21 6 Foam Pad
22 6 Pad Cap
23 2 Large Leg Lever Bushing
24 4 Small Leg Lever Bushing
25 8 Pivot Tube Bushing
26 1 63.5mm Round Inner Cap
27 2 102mm Round Inner Cap
28 8 Weight Rest Bushing
29 2 25mm Round Inner Cap
30 1 Curl Bar Cap
31 3 Thin 48mm Round Inner Cap
32 1 Weight Stop
33 3 Weight Tube
34 6 Foot
35 1 Leg Lever Bumper
36 1 Backrest Bumper
37 2 Weight Tube Sleeve
38 4 Seat/Backrest Bushing
1 Left Upright
39 1 Curl Post Bushing
40 1 Curl Knob
41 4 Upright Pin
2 2 Safety Spotter Pad
4
43 2 Weight Rest Pad
44 1 Seat Carriage Knob
45 1 Curl Bar Pin
46 1 Weight Clip
47 1 48mm Round Inner Cap
48 1 M5 x 10mm Screw
49 4 Seat Carriage Bushing
50 2 M14 Nylon Locknut
51 6 M6 x 16mm Screw
52 5 M4 x 16mm Self-tapping Screw
53 8 M10 x 125mm Screw
54 4 M4 x 25mm Self-tapping Screw
55 6 M6 x 10mm Screw
56 2 M10 x 65mm Screw
57 2 M10 x 120mm Bolt
58 1 M8 x 60mm Bolt
59 2 M6 x 65mm Screw
60 2 M14 x 180mm Bolt
61 4 M8 x 75mm Bolt
62 2 M12 x 90mm Bolt
63 1 M10 x 111mm Bolt Set
64 2 M12 Nylon Locknut
65 8 M10 Washer
66 5 M8 Nylon Locknut
67 2 M10 Nylon Locknut
68 4 M14 Washer
69 2 12.7mm x 4.5mm Spacer
70 2 M6 Washer
71 2 50mm Square Inner Cap
* – User’s Manual
* – Exercise Guide
* – Grease Packet
* – Hex Key
Note: Specifications are subject to change without notice. See the back cover of this manual for information
about ordering replacement parts. *These parts are not illustrated.
18
Page 19
62
1
2
3
4
5
6
7
7
9
10
11
12
13
14
15
15
8
16
17
16
17
18
19
20
21
21
21
21
21
21
22
22
22
22
22
22
23
23
24
24
38
38
25
25
25
25
26
2
7
28
28
28
27
28
28
28
29
29
30
47
31
32
33
34
34
34
34
34
35
36
37
37
31
33
33
31
39
40
41
41
41
41
42
43
43
42
44
45
46
49
51
58
52
53
53
54
53
55
55
56
57
54
55
52
52
52
52
51
59
60
61
54
54
64
65
55
63
63
55
55
59
51
65
65
65
50
66
66
28
48
66
60
6
8
68
50
68
68
70
53
70
67
53
49
69
69
71
71
EXPLODED DRAWING—Model No. 831.15718.0 R
0807A
19
Page 20
ORDERING REPLACEMENT PARTS
To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to provide the following information when contacting us:
• the model number and serial number of the product (see the front cover of the manual)
• the name of the product (see the front cover of this manual)
• the key number and description of the part(s) (see the PART LIST and the EXPLODED DRAWING near the
end of this manual)
LIMITED WARRANTY
ICON Health & Fitness, Inc. (ICON) warrants this product to be free from defects in workmanship and
material, under normal use and service conditions, for a period of ninety (90) days from the date of purchase. This warranty extends only to the original purchaser. ICON's obligation under this warranty is limited to replacing or repairing, at ICON's option, the product through one of its authorized service centers.
All repairs for which warranty claims are made must be pre-authorized by ICON. If the product is shipped
to a service center, freight charges to and from the service center will be the customer’s responsibility. For
in-home service, the customer will be responsible for a minimal trip charge. This warranty does not extend
to any product or damage to a product caused by or attributable to freight damage, abuse, misuse,
improper or abnormal usage or repairs not provided by an ICON authorized service center; products used
for commercial or rental purposes; or products used as store display models. No other warranty beyond
that specifically set forth above is authorized by ICON.
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in connection with the use or performance of the product or damages with respect to any economic loss, loss
of property, loss of revenues or profits, loss of enjoyment or use, costs of removal or installation or other
consequential damages of whatsoever nature. Some states do not allow the exclusion or limitation of incidental or consequential damages.
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of
merchantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth
herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the above
limitation may not apply to you.
Accordingly, the above limitation may not apply to you.
This warranty gives you specific legal rights.
ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813
Part No. 254969 R0807A Printed in China © 2007 ICON IP, Inc.
ou may also have other rights which vary from state to state.
Y
Loading...