
CONFIDENTIAL
This document contains Nokia
confidential material. This
material cannot be shared except
with persons that have a valid
business reason to read this
content. You are personally
responsible to ensure recipients
of this document are aware of
information handling guidelines.
© 2014 Nokia Company confidential

Service Manual for L1 and L2
©2014 Nokia | Nokia Internal Use only | All Rights Reserved.
Nokia XL Dual SIM
RM-1030, RM-1042
Key features
Fastlane to Android™ apps
Dual SIM support
5.0" Display
1 GHz Dual-core CPU
5 MP Camera
Version 1.0
CHECK THE REPAIR
POLICY BEFORE
PERFORMING ANY
MECHANICAL REPAIR ON
SERVICE LEVEL 1&2!
Send feedback
Recommend Change in
KICS
Rate this page in KICS
E-mail
careacademy@nokia.com
Exploded view Disassembly steps
More More
Assembly hints Solder components Service devices
More More More
Product controls and interfaces Service concept Phone reset
More More More

Service Manual Level 1 and 2
©2014 Nokia | Nokia Internal Use only | All Rights Reserved.
Nokia XL Dual SI
RM-1030, RM-1042
ersion 1.
Version Date Description
1.0 29.04.2014 First published version
Version histor

Service Manual Level 1 and 2
©2014 Nokia | Nokia Internal Use only | All Rights Reserved.
Nokia XL Dual SIM
RM-1030, RM-1042
Version 1.0
A-COVER ASSEMBLY
(I0001 - I0005)
1
Exploded view
A-COVER
I0003
TOUCH PANEL
I0001
DISPLAY
I0002
LIGHT SWAP PACKAGE
(I0007 - I0009)
2
LIGHT SWAP PWB
FRONT CAMERA
D-COVER ASSEMBLY
(I0010 - I0016)
3
FRONT CAMERA GASKET
FLASH LENS ADHESIVE
VIBRA ADHESIVE
SENSOR SUPPORT GASKET
EARPIECE
I0004
SIDE KEY FLEX
I0006
I0007
I0019
TOP FLEX
I0020
I0013
I0015
I0016
I0014
IHF FLEX
I0005
PMU SHIELDING LID
I0008
CAMERA
I0018
CAMERA RUBBER
I0017
IHF SPEAKER
I0012
SPEAKER GASKET
I0011
D-COVER
I0010
SCREW TORX+ SIZE 4
M1.6 x 4.55
I0021
Only available
as assembly
TYPE LABEL
I0009
SCREW TORX+ SIZE 4
M1.4 X 3.55
I0022
B-COVER
I0023
Not reuseable
after removal
Repair/swap
only in level 3

Service Manual Level 1 and 2
©2014 Nokia | Nokia Internal Use only | All Rights Reserved.
Nokia XL Dual SI
RM-1030, RM-1042
ersion 1.0
Disassembly steps
1) For disassembling you need the Nokia Standard toolkit version 2. You will also need an AV jack.
2) Protect the A-COVER with protective film.

3) Release the B-COVER by pushing down the bottom corners as shown.
©2014 Nokia | Nokia Internal Use only | All Rights Reserved.
4) Remove the B-COVER.

5) Unscrew the four Torx+ size 4 screws in the order shown. Do not use them again. Discard them.
©2014 Nokia | Nokia Internal Use only | All Rights Reserved.
6) Unscrew the eight Torx+ size 4 screws in the order shown. Do not use them again. Discard them.

7) Start releasing the D-COVER by first releasing the two shown clips on the left side of the device with the
©2014 Nokia | Nokia Internal Use only | All Rights Reserved.
SRT-6. Start from the top.
8) Then slide the SRT-6 along the bottom end and release the two shown clips.

9) Then open the two shown clips on the right side.
©2014 Nokia | Nokia Internal Use only | All Rights Reserved.
10) Then slide the SRT-6 along the top end and release the three shown clips.