DECLARATION OF CONFORMITY
Hereby, NOKIA CORPORATION declares that this HS-123W product is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC.
A copy of the Declaration of Conformity can be found at http://www.nokia.com/phones/
declaration_of_conformity/.
Nokia, Nokia Connecting People and the Nokia Original Accessories logo are trademarks or
registered trademarks of Nokia Corporation. Other product and company names mentioned herein
may be trademarks or tradenames of their respective owners.
Reproduction, transfer, distribution, or storage of part or all of the contents in this document in any
form without the prior written permission of Nokia is prohibited.
Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Nokia operates a policy of ongoing development. Nokia reserves the right to make changes and
improvements to any of the products described in this document without prior notice.
To the maximum extent permitted by applicable law, under no circumstances shall Nokia or any of
its licensors be responsible for any loss of data or income or any special, incidental, consequential or
indirect damages howsoever caused.
The contents of this document are provided "as is". Except as required by applicable law, no
warranties of any kind, either express or implied, including, but not limited to, the implied
warranties of merchantability and fitness for a particular purpose, are made in relation to the
accuracy, reliability or contents of this document. Nokia reserves the right to revise this document or
withdraw it at any time without prior notice.
The availability of particular products may vary by region. Please check with your Nokia dealer for
details.
Export controls
This device may contain commodities, technology or software subject to export laws and regulations
from the US and other countries. Diversion contrary to law is prohibited.
With the Nokia Bluetooth Stereo Headset BH-504, you can make and answer
calls hands-free with your compatible mobile phone and listen to music from
a compatible music player.
You can use the headset with compatible devices that support Bluetooth
wireless technology.
Read this user guide carefully before using the headset. Also, read the user
guide for the device that you connect to the headset. For more information,
see www.nokia-asia.com/support or your local Nokia website.
The product may contain small parts. Keep them out of the reach of small
children.
■ Bluetooth wireless technology
Bluetooth wireless technology allows you to
connect compatible devices without cables.
The headset and the other device do not
need to be in line of sight, but they should
be within 10 metres (33 feet) of each other.
The closer the headset and the other device
are to each other, the better the
performance. The optimal operating range is
shown in dark grey in the picture. The
connection is subject to interference from
distance and obstructions (shown in light
grey) or other electronic devices.
The headset is compliant with the Bluetooth Specification 2.1 + EDR
supporting the following profiles: Headset Profile 1.1, Hands-Free Profile
(HFP) 1.5, Advanced Audio Distribution Profile (A2DP) 1.0, and Audio Video
Remote Control Profile 1.0. Check with the manufacturers of other devices to
determine their compatibility with this device.
Before using the headset, you must charge the battery and pair the headset
with a compatible device.
Parts of the device are magnetic. Metallic materials may be attracted to the
device. Do not place credit cards or other magnetic storage media near the
device, because information stored on them may be erased.
8
■ Charge the battery
Before charging the battery, carefully read “Battery and charger information”,
p. 11.
Warning: Use only chargers approved by Nokia for use with this particular
model. The use of any other types may invalidate any approval or warranty,
and may be dangerous.
When you disconnect the power cord of any accessory, grasp and pull the
plug, not the cord.
1. Connect the charger to a wall outlet.
2. Connect the charger cable to the charger connector. The red indicator light
Charging the battery for 15 minutes provides about 4 hours of talk time or
music playing time. Charging the battery fully may take up to 45 minutes.
3. When the battery is fully charged, the green indicator light is displayed.
Disconnect the charger from the headset, then from the wall outlet.
The fully charged battery has power for up to 9 hours of talk time, up to 90
hours of standby time, or up to 7 hours and 30 minutes of music playing time.
When the battery is discharged, the headset beeps about every minute, and
the red indicator light flashes slowly.
■ Switch the headset on or off
Switch on
To switch on, press and hold the multifunction key for about 2 seconds. The
headset beeps, and the green indicator light is briefly displayed.
When the headset tries to connect to the last used phone or music player, the
green indicator light flashes slowly. When the headset is connected to a
device and is ready for use, the blue indicator light flashes slowly. If the
headset has not been paired with a device, it automatically enters the pairing
mode (see “Pair the headset with phone or music player”, p. 6).
Switch off
To switch off, press and hold the multifunction key for about 5 seconds. The
headset beeps, and the red indicator light is briefly displayed. If the headset is
not connected to a device within about 10 minutes, it switches off
automatically.
■ Pair the headset with phone or music player
If your phone supports the A2DP Bluetooth profile and has a music player
feature, you can use the phone to also play music with the headset.
If your phone does not support the A2DP Bluetooth profile, you can separately
pair the headset with the phone and a music player that supports this profile.
If you have paired and connected the headset with your phone, disconnect the
headset from it before pairing the headset with the music player.
1. Ensure that your phone or music player is switched on.
2. To pair the headset if it has not been previously paired with a device,
switch on the headset. The headset enters the pairing mode, and the blue
indicator light starts to flash quickly.
To pair the headset if it has been previously paired with another device,
ensure that the headset is switched off, and press and hold the
multifunction key (for about 5 seconds) until the blue indicator light starts
to flash quickly.
3. Activate the Bluetooth feature on your phone or music player, and set it to
search for Bluetooth devices.
4. Select the headset from the list of found devices on your phone or music
player.
5. Enter the passcode 0000 to pair and connect the headset to your device. If
your device does not have a keypad, it may use this passcode by default.
In some devices, you may need to make the connection separately after
pairing.
If pairing is successful, the headset appears in the menu of your device where
you can view the currently paired Bluetooth devices.
When the headset is connected to your device and is ready for use, the blue
indicator light flashes slowly.
Disconnect the headset
To disconnect the headset from your device, switch off the headset, or
disconnect it in the Bluetooth menu of your device. If you disconnect the
headset from a music player while listening to music, first press the play/
pause key to pause the playing.
You do not need to delete pairing with the headset to disconnect it.
Reconnect the headset
To connect the headset to the phone or music player that you have last used
with it, switch on the headset, or make the connection in the Bluetooth menu
of your device.
You may be able to set your device so that the headset connects to it
automatically. To activate this feature in a Nokia device, change the paired
device settings in the Bluetooth menu.
To use the headset, unfold it and place it over your head so that the speaker
pads rest comfortably on your ears.
Place the pad indicated with L on the left ear and the pad with R on the right
ear. Adjust the headband length for the best fit.
Warning: When you use the headset, your ability to hear outside sounds may
be affected. Do not use the headset where it can endanger your safety.
■ Adjust the volume
To adjust the headset volume, press the volume up or down key during a call
or while listening to music. To adjust the volume quickly, press and hold either
key.
■ Calls
To make a call, use your mobile phone in the normal way when the headset is
connected to it.
To redial the number you last called (if your phone supports this feature with
the headset), when no call is in progress, press the multifunction key twice.
To activate voice dialling (if your phone supports this feature with the
headset), when no call is in progress, press and hold the multifunction key for
about 2 seconds until the phone starts voice dialling, and proceed as
described in the phone user guide.
To answer or end a call, press the multifunction key, or use the phone keys. To
reject a call, press the multifunction key twice quickly.
To mute or unmute the microphone during a call, press the play/pause key.
To switch a call from the headset to the connected phone, press and hold the
play/pause key for about 2 seconds. To switch the call from the phone to the
headset, press the multifunction key.
To listen to music, connect the headset to a compatible music player that
supports the A2DP Bluetooth profile.
The available music functions depend on your music player.
If you receive or make a call while listening to music, the music is paused until
you end the call.
Warning: Listen to music at a moderate level. Continuous exposure to high
volume may damage your hearing.
To play a song, select it in the music player, and press the play/pause key.
To pause or resume playing, press the play/pause key. To stop playing, press
the play/pause key twice quickly.
To select the next song during playback, press the fast forward key. To select
the previous song, press the rewind key. To scroll through the current song
quickly, press and hold either key.
■ Clear settings or reset
To clear the pairing settings from the headset, switch off the headset, and
press and hold the multifunction key and the volume up key (for over 8
seconds) until the red, green, and blue indicator lights alternate three times.
To reset the headset if it stops functioning, even though it is charged, connect
the headset to a charger, and press and hold the multifunction key and the
volume up key. The reset does not clear the pairing settings.
This device has an internal, nonremovable, rechargeable battery. Do not attempt to
remove the battery from the device as you may damage the device. This device is
intended for use when supplied with power from the following chargers: AC-4, AC-5,
AC-8, DC-4, and DC-9. The exact charger model number may vary depending on the
type of plug. The plug variant is identified by one of the following: E, EB, X, AR, U, A, C,
or UB. The battery can be charged and discharged hundreds of times, but it will
eventually wear out. Recharge your battery only with Nokia approved chargers
designated for this device. Use of an unapproved charger may present a risk of fire,
explosion, leakage, or other hazard.
If a battery is being used for the first time or if the battery has not been used for a
prolonged period, it may be necessary to connect the charger, then disconnect and
reconnect it to begin charging the battery. If the battery is completely discharged, it
may take several minutes before the charging indicator light is displayed.
Unplug the charger from the electrical plug and the device when not in use. Do not
leave a fully charged battery connected to a charger, since overcharging may shorten its
lifetime. If left unused, a fully charged battery will lose its charge over time.
Always try to keep the battery between 15°C and 25°C (59°F and 77°F). Extreme
temperatures reduce the capacity and lifetime of the battery. A device with a hot or
cold battery may not work temporarily. Battery performance is particularly limited in
temperatures well below freezing.
Do not dispose of batteries in a fire as they may explode. Batteries may also explode if
damaged.
Never use any charger that is damaged.
Important: Operating times are estimates only and depend on network
conditions, features used, battery age and condition, temperatures to which
battery is exposed, and many other factors.
Your device is a product of superior design and craftsmanship and should be treated
with care. The following suggestions will help you protect your warranty coverage.
• Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can
contain minerals that will corrode electronic circuits. If your device does get wet,
allow it to dry completely.
• Do not use or store the device in dusty, dirty areas. Its moving parts and electronic
components can be damaged.
• Do not store the device in hot areas. High temperatures can shorten the life of
electronic devices, damage batteries, and warp or melt certain plastics.
• Do not store the device in cold areas. When the device returns to its normal
temperature, moisture can form inside the device and damage electronic circuit
boards.
• Do not attempt to open the device.
• Do not drop, knock, or shake the device. Rough handling can break internal circuit
boards and fine mechanics.
• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the
device.
• Do not paint the device. Paint can clog the moving parts and prevent proper
operation.
These suggestions apply equally to your device, charger, or any accessory. If any device
is not working properly, take it to the nearest authorised service facility for service.