DECLARATION OF CONFORMITY
Hereby, NOKIA CORPORATION, declares that this RM-165 product is in compliance with the
essential requireme nts and other relev ant provisions of Directive 1 999/5/EC. A copy of the
Declaration of Conform ity can be found from
http://www.nokia.com/phones/declaration_of_conformity/.
0434
The crossed-out wheeled bin means that within the European Union the product
must be taken to separate collection at the product end-of-life. This applies to your
device but also to any enhancements marked with this symbol. Do not dispose of
these products as unsorted municipal waste. For more information, see product
Eco-Declaration or country specific information at www.nokia.com.
Reproduction, transfer, distribution or storage of part or all of the contents in this document
in any form without the prior written permission of Nokia is p rohibited.
US Patent No 5 818437 and other pending patents. T9 text input software Copyright (C)
1997-2006. Tegic Communications, Inc. All rights reserve d.
Nokia, Nokia Connecting People, Xpress-on, and Pop-Port are trademarks or registered
trademarks of Nokia Corporation. Other product and company names mentioned herein may
be trademarks or tradenames of their respective owners.
Nokia tune is a sound mark of Nokia Corporation.
Includes RSA BSAFE cryptographic or security protocol software from RSA Security.
Java is a trademark of Sun Microsystems, Inc.
This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and
noncommer cial use in connection with inform ation which has been e ncoded in compliance
with the MPEG-4 Visual Standard by a consumer engaged in a personal, and noncommercial
activity, and (ii) for use in connection with MPEG-4 video provided by a licensed video
provider. No license is granted or shall be implied for any other use. Additional information
including that relating to pro motional, internal, and commercial uses may be obtaine d from
MPEG LA, LLC. See http://www.mpegla.com.
Nokia operates a policy of continuous development. Nokia reserves the right to make
changes and improvements to any of the products described in this document without prior
notice.
This device complies with D irective 2002/95/EC on the restriction of the use of certain
hazardous su bstances in electrical and electr onic equipm ent.
Under no circumstances shall Nokia be responsible for any loss o f data or income or any
special, incidental, conseq uential or indirect damages howsoev er caused.
The contents of th is document are provided "as is". Except as required by appli cable law, no
warranties of any kind, either express or implied, including, but not limited to, the implied
warranties of merchantability a nd fitness for a particu lar purpose, are made i n relation to the
accuracy, reliability or contents of this document. Nokia reserves the right to revise this
document or withdraw it at any time without prior notice.
The availability of particular products may vary by region. Please check with the Nokia dealer
nearest to you.
Export Controls
This device may contain commodities, technology or software subject to export laws and
regulations from the US and oth er countries. Diversion contrary to law is prohibited.
Model number: Nokia 8800d
Hereinafter referred to as Nokia 8800 Sirocco Edition
9247181/Issue 1
Contents
Contents
For your safety ........................ 6
General information................. 9
Your phone package.............................. 9
PC Suite ................................................. 90
Packet data, HSCSD, and CSD.......... 90
Data communication applications . 90
18. Battery information......... 91
Charging and discharging ................. 91
Nokia battery authentication .......... 92
Care and maintenance ........... 94
Additional safety information 95
Index........................................ 99
5
For your safety
For your safety
Read these simple guidelines. Not following them may be dangerous or illegal.
Read the complete user guide for further information.
SWITCH ON SAFELY
Do not switch the phone on when wireless phone use is prohibited or
when it may cause interference or danger.
ROAD SAFETY COMES FIRST
Obey all local laws. Always keep your hands free to operate the
vehicle while driving. Your first consideration while driving should be
road safety.
INTERFERENCE
All wireless phones may be susceptible to interference, which could
affect performance.
SWITCH OFF IN HOSPITALS
Follow any restrictions. Switch the phone off near medical
equipment.
SWITCH OFF IN AIRCRAFT
Follow any restrictions. Wireless devices can cause interference in
aircraft.
SWITCH OFF WHEN REFUELING
Do not use the phone at a refuelling point. Do not use near fuel or
chemicals.
SWITCH OFF NEAR BLASTING
Follow any restrictions. Do not use the phone where blasting is in
progress.
USE SENS IBLY
Use only in the normal position as explained in the product
documentation. Do not touch the antenna unnecessarily.
QUALIFIED SERVICE
Only qualified personnel may install or repair this product.
ENHANCEMENTS AND BATT ERIES
Use only approved enhancements and batteries. Do not connect
incompatible products.
6
For your safety
WATER-RESISTANCE
Your phone is not water-resistant. Keep it dry.
BACK-UP COPIES
Remember to make back-up copies or keep a written record of all
important information stored in your phone.
CONNECTING TO OTHER DEVICES
When connecting to any other device, read its user guide for detailed
safety instructions. Do not connect incompatible products.
EMERGENCY CALLS
Ensure the phone is switched on and in service. Press the end key as
many times as needed to clear the display and return to the start
screen. Enter the emergency number, then press the call key. Give
your location. Do not end the call until given permission to do so.
■ About your device
The wireless device described in this guide is approved for use on the EGSM 900,
and GSM 1800 and 1900 networks. Contact your service provider for more
information about networks.
Your product represents superior design and craftsmanship, and comes with
stainless steel covers and a glass display treated for scratch resistance. Therefore,
handle your phone with due care.
When using the features in this device, obey all laws and respect the privacy and
legitimate rights of others, including copyright.
When you take and use images or video clips, obey all laws and respect local
customs as well as privacy and legitimate rights of others.
Warning: To use any features in this device, other than the alarm clock,
the device must be switched on. Do not switch the device on when
wireless device use may cause interference or danger.
■ Network services
To use the phone you must have service from a wireless service provider. Many of
the features in this device depend on features in the wireless network to
function. These network services may not be available on all networks or you may
have to make specific arrangements with your service provider before you can
utilize network services. Your service provider may need to give you additional
instructions for their use and explain what charges will apply. Some networks
7
For your safety
may have limitations that affect how you can use network services. For instance,
some networks may not support all language-dependent characters and services.
Your service provider may have requ ested that certain features be disabled or not
activated in your device. If so, they will not appear on your device menu. Your
device may also have been specially configured. This configuration may include
changes in menu names, menu order and icons. Contact your service provider for
more information.
This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP
protocols. Some features of this device, such as text messages, multimedia
messages, instant messages, e-mail, mobile Internet services, content and
application downloads, and synchronization with remote Internet server, require
network support for these technologies.
■ Shared memory
The following features in this device may share memory: contacts, text and
instant messages, e-mail, voice tags, calendar, to-do notes, Java
applications, and note application. Use of one or more of these features may
reduce the memory available for the remaining features sharing memory. For
example, saving many Java applications may use all of the available memory.
Your device may display a message that the memory is full when you try to use a
shared memory feature. In this case, delete some of the information or entries
stored in the shared memory features before continuing. Some of the features,
such as Java applications, may have a certain amount of memory specially
allotted to them in addition to the memory shared with other features.
Note that gallery files share a different memory. For further information see
“Gallery,” p. 67.
TM
games and
■ Enhancements
A few practical rules about accessories and enhancements:
• Keep all accessories and enhancements out of the reach of small children.
• When you disconnect the power cord of any accessory or enhancement, grasp
and pull the plug, not the cord.
• Check regularly that enhancements installed in a vehicle are mounted and
are operating properly.
• Installation of any complex car enhancements must be made by qualified
personnel only.
8
General information
General information
Model number: Nokia 8800d
Hereinafter referred to as Nokia 8800 Sirocco Edition
■ Your phone package
In your package you will find the following items:
• Your Nokia 8800 Sirocco Edition phone
•Two Nokia Batteries BP-6X
• Nokia Compact Charger AC-3
• Nokia Desk Stand DT-16
• Nokia Headset HS-15
• Nokia Bluetooth Headset HS-64W
• Nokia Carrying Pouch CP-104
• Suede cleaning cloth
• User guide
• Story booklet
•CD-ROM
The items supplied with your phone and available enhancements may be
different, depending on your region or service provider. If your package
does not include all the listed items above, please contact your retailer.
Before you can use your phone, you need to insert the SIM card, and
insert and charge the battery. See “Install SIM card and battery,” p. 15.
To avoid scratches, your device has to be carried in its carrying pouch. Do not use
the cleaning cloth for other objects than your phone.
9
General information
■ Overview of functions
Your phone provides many functions that are practical for daily use,
such as a calendar, a clock, an alarm clock, a radio, a music player, and a
built-in camera. Your phone also supports the following functions:
• Enhanced data rates for GSM evolution (EDGE), see “Packet data,”
p. 59.
• Extensible hypertext mark-up language (XHTML), see “Web,” p. 81.
• E-mail application, see “E-mail application,” p. 36.
• Java 2 Platform, Micro Edition (J2METM), see “Applications,” p. 79.
• Bluetooth wireless technology, see “Bluetooth wireless technology,”
p. 58.
• Synchronization of data from another phone without having a SIM
card inserted, see “Data transfer with a device,” p. 61.
• Plug and play online service to get the configuration settings, see
“Switch the phone on and off,” p. 17, and “Configuration,” p. 64.
■ Access codes
Security code
The security code (5 to 10 digits) helps to protect your phone against
unauthorized use. The preset code is 12345. To change the code, and to
set the phone to request the code, see “Security,” p. 65.
PIN codes
The PIN (personal identification number) code and the UPIN (universal
personal identification number) code (4 to 8 digits) help to protect your
SIM card against unauthorized use. See “Security,” p. 65.
The PIN2 code (4 to 8 digits) may be supplied with the SIM card and is
required for some functions.
The module PIN is required to access the information in the security
module. See “Security module,” p. 86.
The signing PIN is required for the digital signature. See “Digital
signature,” p. 88.
10
General information
PUK codes
The PUK (personal unblocking key) code and the UPUK (universal
personal unblocking key) code (8 digits) is required to change a blocked
PIN code and UPIN code, respectively. The PUK2 code (8 digits) is
required to change a blocked PIN2 code.
Barring password
The barring password (4 digits) is required when using the call barring
service. See “Security,” p. 65.
■ Configuration settings service
To use some of the network services, such as mobile Internet services,
MMS, or remote Internet server synchronization, your phone needs the
correct configuration settings. You may be able to receive the settings
directly as a configuration message. After receiving the settings you
need to save them on your phone. The service provider may provide a
PIN that is needed to save the settings. For more information on
availability, contact your network operator, service provider, nearest
authorized Nokia dealer, or visit the support area on the Nokia website,
www.nokia.com/support.
When you have received a configuration message, Configuration settings received is displayed.
To save the settings, select Show > Save. If the phone requests Enter settings' PIN:, enter the PIN code for the settings, and select OK. To
receive the PIN code, contact the service provider that supplies the
settings. If no settings are saved yet, these settings are saved and set as
default configuration settings. Otherwise, the phone asks Activate saved configuration settings?.
To discard the received settings, select Exit, or Show > Discard.
To edit the settings, see “Configuration,” p. 64.
11
General information
■ Download content
You may be able to download new content (for example themes, tones,
and video clips) to the phone (network service). Select the download
function (for example, in Gallery). To access the download function, see
the respective menu descriptions. For the availability of different
services, pricing, and tariffs, contact your service provider.
Important: Use only services that you trust and that offer adequate
security and protection against harmful software.
■ Nokia Care Premium Service
As a Nokia 8800 Sirocco Edition phone owner, you are entitled to Nokia
Care Premium Service for 24 months from the date of the purchase. This
includes (in selected countries*):
• 24-month warranty** for your Nokia 8800 Sirocco Edition phone
• Priority repair service** at selected Nokia Care points. Check
www.nokia.com/support or your local Nokia Web site for the
selected Nokia Care points that offer priority repair service or call to
Nokia Care (for the phone numbers check the following list).
Naturally you may also visit any other Nokia Care point in your area
for standard repair service.
• Unparalleled Nokia Care Contact Center support at the local call
rate. For your local Nokia Care Contact Center phone number and the
operational hours, check the following list.
CountryLocal phone
Austria0810 281 900 Mon-Sat
Belgium070 70 77 70Mon-Fri
Czech841 11 44 55Mon-Fri
number for
Nokia Care
Premium
Service
Operating
hours
(local time)
9-21
9-21
9-18
12
CountryLocal phone
Luxembourg 034 208 08 193 Mon-Fri
Malta0574 519334Mon-Fri
Netherlands 0900 202 60 55 Mon-Fri
number for
Nokia Care
Premium
Service
Operating
hours
(local time)
9-21
9-21
9-21
General information
CountryLocal phone
Cyprus210 6142844Mon-Fri
Denmark35 444 222Mon-Fri
Estonia611 9901Mon-Fri
Finland0303 8286Mon-Fri
France08 11 00 45 67 Mon-Fri
Germany 0180 501 502 0 Mon-Fri
Greece210 6142 844 Mon-Fri
Hungary06 40 505 505 Mon-Fri
Ireland1890 946 245 Mon-Fri
Italy848 690 691Mon-Fri
Latvia7320603Mon-Fri
Lithuania 8 700 55559Mon-Fri
number for
Nokia Care
Premium
Service
Operating
hours
(local time)
8-17
9-21
9-17
9-21
9-21
9-21
8-17
9-18
9-21
9-21
9-17
9-17
CountryLocal phone
Norway22 97 1717Mon-Fri
Poland022 654 00 43 Mon-Fri
Portugal808 780 780Mon-Fri
Romania021 407 75 05 Mon-Fri
Russia+7(495) 727
Slovakia(02) 850 111
Spain902 404 414Mon-Fri
Sweden077 66 22 222 Mon-Fri
Switzerland 0848 100010Mon-Sat
Turkey0 212 337 17 17 Mon-Sun
UK0870 600 6012 Mon-Fri
Ukraine8 800 50 101 50 Mon-Sun
number for
Nokia Care
Premium
Service
2222
561
Operating
hours
(local time)
9-21
9-18
9-18
9-18
Mon-Fri
8-20
Mon-Fri
9-18
9-21,
Sat 9-16
9-21
9-21
9-18
9-21
9-20
*Services may vary for each country. Check www.nokia.com/support or
your local Nokia Web site for details.
**Based on Nokia end user warranty terms. In Europe, the 24-month
warranty is applicable in the following countries: European Union
member states, Azerbaijan, Belarus, Bosnia and Herzegovina, Bulgaria,
Croatia, Georgia, Iceland, Israel, Kazakhstan, Former Yugoslav Republic
of Macedonia, Moldova, Mongolia, Norway, Romania, Russia, Serbia and
Montenegro, Switzerland, Turkey, Ukraine.
13
General information
■ Nokia support on the Web
Check www.nokia.com/support or your local Nokia Web site for the
latest version of this guide, additional information, downloads, and
services related to your Nokia product.
14
Get started
1.Get started
■ Install SIM card and battery
Always switch the device off and disconnect the charger before removing the
battery.
Keep all SIM cards out of the reach of small children. For availability and
information on using SIM card services, contact your SIM card vendor. This may
be the service provider, network operator, or other vendor.
This device is intended for use with BP-6X battery.
The SIM card and its contacts can easily be damaged by scratches or
bending, so be careful when handling, inserting, or removing the card.
To remove the back cover of the phone,
push the sideways release buttons (1),
and slide the back cover to remove it
from the phone (2).
Remove the battery as shown (3).
1
1
2
Insert the SIM card (4). Make sure that
the SIM card is properly inserted and that
the contact area on the card is facing
downwards.
15
Get started
Replace the battery (5). Observe
the battery contacts. Always use
original Nokia batteries. See
“Nokia battery authentication,”
p. 92.
Slide the back cover into its place
(6).
■ Charge the battery
Warning: Use only batteries, chargers, and enhancements approved by
Nokia for use with this particular model. The use of any other types may
invalidate any approval or warranty, and may be dangerous.
Check the model number of any charger before use with this device. This device is
intended for use when supplied with power from the AC-3 charger.
For availability of approved enhancements, please check with your dealer.
Connect the lead from the charger to the
socket at the bottom of your phone.
Connect the charger to a wall socket.
If the battery is completely discharged, it
may take a few minutes before the
charging indicator appears on the display
or before any calls can be made.
The charging time depends on the charger and the battery used. For
example, charging a BP-6X battery with the AC-3 charger takes
approximately 3 hours while the phone is in the standby mode.
16
Get started
Desk stand DT-16
The desk stand allows you to charge the phone battery and the spare
battery at the same time. The desk stand can be supplied with power
from the AC-3 or AC-4 charger. The charge level of the phone battery is
indicated on the phone display.
The white indicator light around the bottom of the desk stand shows the
charging status of the inserted spare battery:
• The light pulsates slowly when the desk stand is empty, when only
the phone is inserted (the phone battery is fully charged or being
charged), or when both the phone and the spare battery are inserted,
and the spare battery is fully charged.
• The light is continuously on when the spare battery is being charged.
The spare battery will be charged if the phone is not inserted, or if
the phone battery is fully charged.
• To turn the light on or off, press and hold the button on the back of
the desk stand.
• If the light is not shown even though you have not turned it off by
pressing the button, the charger connected to the desk stand may
not be compatible or the spare battery temperature may be too high.
Check the compatibility of the charger, and use only compatible
Nokia chargers. If the spare battery temperature is too high, it will
not be charged. When the temperature of the spare battery returns
to normal, charging starts, and the light turns on again.
■ Switch the phone on and off
Warning: Do not switch the phone on when wireless phone use is
prohibited or when it may cause interference or danger.
Press and hold the power key as shown.
If the phone asks for a PIN or a UPIN code, enter the
code (for example, displayed as ****), and select OK.
When you switch on your phone for the first time, and
the phone is in the standby mode, p. 20, you are asked to
get the configuration settings from your service provider
17
Get started
(network service). Confirm or decline the query. See Connect to service
provider support, p. 65, and “Configuration settings service,” p. 11.
Set the time, zone, and date
Enter the local time, select the time zone of your location in terms of the
time difference with respect to Greenwich Mean Time (GMT), and enter
the date. See “Time and date,” p. 56.
■ Open the keypad
To open the keypad, slide the phone as shown.
■ Antenna
Your device has an internal antenna.
Note: As with any other radio
transmitting device, do not touch
the antenna unnecessarily when the
device is switched on. Contact with
the antenna affects call quality and
may cause the device to operate at a
higher power level than otherwise
needed. Avoiding contact with the
antenna area when operating the
device optimizes the antenna
performance and the battery life.
18
2.Your phone
■ Keys and parts
•Power key (1)
• Camera lens (2)
• Loudspeaker (3)
• Battery cover release buttons (4)
• Earpiece (5)
• Left selection key (6)
• Right selection key (7)
• Call key (8)
• End key (9)
• Scroll key (10)
• Middle selection key (11)
• Keypad (12)
Your phone
• Microphone (13)
• Charger connector (14)
• Enhancements connector (15)
• Headset HS-15, rotating clip
19
Your phone
■ Standby mode
When the phone is ready for use, and you have not entered any
characters, the phone is in the standby mode.
• Name of the network or the operator logo (1)
• Signal strength of the local cellular network (2)
• Battery charge level (3)
• Function of the left selection key is Go to (4) or
a shortcut to another function. See “Left
selection key,” p. 56.
• Function of the middle selection key is Menu (5)
• Function of the right selection key is Names (6) to access the Names
menu or another shortcut to a function that you selected. See “Right
selection key,” p. 57. Operator variants may have an
operator-specific name to access an operator specific Web site.
Shortcuts
• To access the list of dialed numbers, press the call key once. Scroll to
the number or name that you want and to call the number, press the
call key.
• To open the web browser, press and hold 0.
• To call your voice mailbox, press and hold 1 .
• Use the scroll key as a shortcut. See “Navigation key,” p. 57.
• To change from any profile to the silent profile and back to the
general profile, press and hold #.
• To change the profile, open the list of profiles: briefly press the power
key, and select the desired profile from the list.
Power saving features
Your phone has features that save battery power in standby mode if the
phone is not active. These features may be activated or not. See “Power
saver,” p. 55 and “Sleep mode,” p. 56.
20
Your phone
Indicators
You have unread messages.
The phone registered a missed call. See “Call log,” p. 53.
The keypad is locked. See “Keypad lock (keyguard),” p. 22.
The phone does not ring for an incoming call or text message
when Incoming call alert is set to Off and Message alert tone
is set to Off. See “Tones,” p. 54.
The alarm clock is set to On. See “Alarm clock,” p. 74.
, When the packet data connection mode Always online is
selected and the packet data service is available, the indicator is
shown. Refer to “Packet data,” p. 59.
, A GPRS or EGPRS connection is established.
, The GPRS or EGPRS connection is suspended (on hold).
Bluetooth connection indicator. See “Bluetooth wireless
technology,” p. 58.
■ Flight mode
You can deactivate all radio frequency functionality and still have
access to offline games, calendar, and phone numbers. Use the flight
mode in radio sensitive environments—on board aircraft or in hospitals.
When the flight mode is active, is shown.
Select Menu > Settings > Profiles > Flight > Activate or Personalise.
To deactivate the flight mode, select any other profile.
In the flight mode you can make an emergency call. Enter the
emergency number, press the call key, and select Yes when asked You
must select another profile to be able to make a call. Exit flight
profile? The phone attempts to make an emergency call.
When the emergency call ends, the phone automatically changes to the
general profile mode.
21
Your phone
■ Keypad lock (keyguard)
You can lock the keypad to prevent accidental keypresses.
• To lock the keypad and the power key, close the slide, and press Lock;
or select Menu and press * within 3.5 seconds.
• To unlock the keypad, open the slide; or select Unlock > OK within
1.5 seconds. If the Security keyguard is set On, enter the security
code when requested.
To answer a call when the keyguard is on, press the call key. When you
end or reject the call, the keypad is automatically locked.
For Automatic keyguard and Security keyguard, see “Phone,” p. 63.
When the keyguard is on, calls still may be possible to the official emergency
number programmed into your device.
22
Call functions
3.Call functions
■ Make a call
1. Enter the phone number, including the area code. To delete an
incorrect character, select Clear.
For international calls, press
+ character replaces the international access code). Then enter the
country code, the area code without the leading 0, if necessary, and
the phone number.
2. To call the number, press the call key.
3. To end the call or to cancel the call attempt, press the end key, or
close the slide.
Make a call using names
To search for a name or phone number that you have saved in Contacts,
see “Search for a contact,” p. 49. Press the call key to call the number.
Last number redialing
To access the list of up to 20 numbers you last called or attempted to
call, press the call key once in the standby mode. To call the number,
select the number or name, and press the call key.
■ Speed dialing
Assign a phone number to one of the speed-dialing keys, 2 to 9. See
“Speed dialing,” p. 52. Call the number in either of the following ways:
• Press a speed-dialing key, then the call key.
•If Speed dialling is set to On, press and hold a speed-dialing key until
the call is started. See Speed dialling in “Call,” p. 62.
twice for the international prefix (the
*
■ Enhanced voice dialing
You can make a phone call by saying the name that is saved in the
contact list of the phone. A voice command is added automatically to all
entries in the contact list of the phone.
23
Call functions
Voice commands are language-dependent. To set the language, see
Voice playback language in “Phone,” p. 63.
If an application is sending or receiving data using a packet data
connection in GSM, end the application before you use voice dialing.
1. In the standby mode, press and hold the right selection key. A short
tone is played, and Speak now is displayed.
If you are using a compatible headset with the headset key, press and
hold the headset key to start the voice dialing.
2. Say the voice command clearly. If the voice recognition is successful,
a list with matches is shown. The phone plays the voice command of
the match on the top of the list. After about 1.5 seconds, the phone
dials the number. If the result was not the correct one, select
manually another entry from the list.
Note: Using voice tags may be difficult in a noisy environment or
during an emergency, so you should not rely solely upon voice dialing in
all circumstances.
Using voice commands to carry out a selected phone function is similar
to voice dialing. See “Voice commands,” p. 57.
■ Answer or reject a call
To answer an incoming call, press the call key, or open the slide. To end
the call, press the end key, or close the slide.
To reject an incoming call when the slide is open, press the end key.
To mute the ringing tone, select Silence. Then answer or reject the call.
Tip: If the Divert if busy function is activated to divert the calls
(for example, to your voice mailbox), rejecting an incoming call
also divert the call. See “Call,” p. 62.
If a compatible headset supplied with the headset key is connected to
the phone, press the headset key to answer and end a call.
24
Call functions
Call waiting
To answer a waiting call during an active call, press the call key. The first
call is put on hold. To end the active call, press the end key.
To activate the Call waiting function, see “Call,” p. 62.
■ Options during a call
Many of the options that you can use during a call are network services.
For availability, contact your network operator or service provider.
To increase or decrease the volume during a call, press the scroll key
right or left.
Select Options and from the following:
Mute or Unmute, Contacts, Menu, Record, Lock keypad, Loudspeaker
or Handset, and the network services Hold or Unhold, Answer and
Reject, New call, Send DTMF (to send tone strings), Swap (to switch
between the active call and the call on hold), Transfer (to connect a call
on hold to an active call and disconnect yourself), Conference (to make
a conference with up to five persons), Add to conference, Private call
(to have a private conversation), End call, End all calls.
Warning: Do not hold the device near your ear when the loudspeaker
is in use, because the volume may be extremely loud.
25
Write text
4.Write text
To enter text (for example, when writing a message), use traditional or
predictive text input. When using traditional text input, press a number
key, 1 to 9, repeatedly until the desired character appears. Using
predictive text input you can enter a letter with a single keypress.
When you write text, appears at the top left of the display,
indicating predictive text input, and appears, indicating traditional
text input. , , or appears next to the text input indicator,
indicating the character case. To change the character case, press #.
indicates number mode. To change from the letter to number
mode, press and hold #, and select Number mode.
■ Settings
To set the writing language to a language other than that selected in
Phone language, select Options > Writing language. Predictive text
input is only available for the languages on the list.
To set the predictive text input option, select Options > Prediction on,
to set traditional text input option select Options > Prediction off.
■ Predictive text input
Predictive text input allows you to write text quickly using the phone
keypad and a built-in dictionary.
1. Start writing a word using the keys, 2 to 9. Press each key only once
for a single letter. The word changes after each keystroke.
2. When you finish writing the correct word, add a space to confirm it
by pressing 0.
If the word is not correct, press * repeatedly, or select Options > Matches. When the word that you want appears, select Use.
If the ? character is displayed after the word, the word you intended
to write is not in the dictionary. To add the word to the dictionary,
select Spell. Enter the word (traditional text input is used), and select
Save.
26
Write text
Writing compound words
Enter the first part of the word. Confirm it by pressing the scroll key
right. Write the last part of the word and confirm the word.
■ Traditional text input
Press a number key, 1 to 9, repeatedly until the desired character
appears. Not all characters available under a number key are printed on
the key. The characters available depend on the selected writing
language. See “Settings,” p. 26.
If the next letter you want is located on the same key as the present one,
wait until the cursor appears, or press any of the scroll keys, and enter
the letter.
The most common punctuation marks and special characters are
available under the number key 1.
27
Navigate the menus
5.Navigate the menus
The phone offers you an extensive range of functions grouped into
menus.
■ Access a menu function
1. To access the menu, select Menu.
To change the menu view, select Options > Main menu view > List
or Grid.
To rearrange the menu, scroll to the menu you want to move, and
select Options > Organise > Move. Scroll to where you want to
move the menu, and select OK. To save the change, select Done > Yes.
2. Scroll through the menu, and select, for example, Settings.
3. If the menu contains submenus, select the one that you want, for
example, Call.
4. If the selected menu contains further submenus, select the one that
you want, for example, Anykey answer.
5. Select the setting of your choice.
6. To return to the previous menu level, select Back. To exit the menu,
select Exit.
The menus, submenus, and setting options are numbered. To access
them, shortcut numbers can be used.
To access the menu, select Menu. Enter quickly, within 2 seconds, the
shortcut number of the menu function you want to access. To access the
menu functions in menu level 1, enter 0 and 1.
28
Messaging
6.Messaging
The message services can only be used if they are supported
by your network or your service provider.
Note: When sending messages, your device may display the words
Sending message. This is an indication that the message has been sent
by your device to the message center number programmed into your
device. This is not an indication that the message has been received at
the intended destination. For more details about messaging services,
check with your service provider.
Important: Exercise caution opening messages. Messages may contain
malicious software or otherwise be harmful to your device or PC.
Only devices that have compatible features can receive and display messages.
The appearance of a message may vary depending on the receiving device.
■ Text messages (SMS)
Using the short message service (SMS) you can send and receive
multipart messages (network service) that can contain pictures.
Before you can send any text, picture, or e-mail message, you must save
your message centre number. See “Message settings,” p. 45.
To check SMS e-mail service availability and to subscribe to the service,
contact your service provider. To save an e-mail address in Contacts, see
“Save numbers, items, or an image,” p. 49.
Your device supports the sending of text messages beyond the character limit for
a single message. Longer messages will be sent as a series of two or more
messages. Your service provider may charge accordingly. Characters that use
accents or other marks, and characters from some language options like Chinese,
take up more space, limiting the number of characters that can be sent in a single
message.
An indicator at the top of the display shows the total number of characters left
and the number of messages needed for sending. For example, 673/2 means that
there are 673 characters left and that the message will be sent as a series of two
messages.
29
Messaging
Write and send a message
1. Select Menu > Messaging > Create message > Text message.
2. Enter the recipient’s phone number in the To: field. To retrieve a
phone number from Contacts, select Add > Contact. To send the
message to multiple recipients, add the desired contacts one by one.
Scroll right to add new contacts manually in the To: f ie ld. To send t he
message to persons in a group, select Contact group and the desired
group. To retrieve the contacts to which you recently sent messages,
select Add > Recently used. To retrieve the contacts from the Call
log, select Add > Open Log.
To send a text message to an e-mail address, enter the e-mail
address in the To: field.
3. Scroll down, and write your message in the Message: field. See
“Write text,” p. 26.
To insert a template into the message, select Options > Use template.
4. To send the message, select Send; or press the call key. See “Send a
message,” p. 32.
Read and reply to a message
1 message received, or the number of new messages with messages
received is shown when you receive a message.
1. To view a new message, select Show. To view it later, select Exit.
is shown if you have unread messages in Inbox. To access an
unread message in the inbox, select Menu > Messaging > Inbox. If
more than one message is received, select the message that you
want to read.
2. To view the list of available options while reading a message, select
Options.
3. To reply to a message, select Reply > Text message, Multimedia, or Audio message.
Scroll down, and write your message in the Message: field. See
“Write text,” p. 26.
30
Loading...
+ 71 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.