Nokia 6300i, RM-337 Service Manual
efrcom
Page (32)
Markets, Care GTM
Training Content Creation
Multimedia Creation & Support CONFIDENTIAL
1
SERVICE MANUAL
Level 1&2
RM-337
RM-322
Transceiver characteristics:
Band:
EGSM:
-RM-322: Tri-band EDGE phone for EGSM 900/1800/1900MHz
-RM-323: Tri-band EDGE phone for EGSM 850/1800/1900MHz
-RM-337: Tri-band EDGE phone for EGSM 900/1800/1900MHz
WCDMA: -----
MGR
26.Mrz.2008
RM-323
Display:
LCD: 5.08cm (2inch) QVGA display with 16.7M true colors,
resolution 240 x 320 pixel
Camera:
Camera: 2.0 Megapixel, 8x digital zoom
Operating System:
Series 40
Connections:
Wireless: Bluetooth, WLAN
Connector: Mini USB Connector, AV Connector 2.5mm
Memory:
MicroSD™
Transceiver with BL-4c Li-Ion battery pack
Talk time Standby Note
Depends on network
up to 3.5h up to 14.5days
parameters and
phone settings
6300i RM-337 / 6301 RM-322/ 6301b RM-323
Environmental characteristics:
• Lead-freesoldered
Copyright © 2006-2008 NOKIA Corporation. All rights reserved.
Training Content Creation
Markets, Care GTM
Multimedia Creation & Support CONFIDENTIAL
26.Mrz.2008
2
6300i RM-337 / 6301 RM-322/ 6301b RM-323
Copyright © 2006-2008 NOKIA Corporation. All rights reserved.
MGR
Page (32)
Page
TABLE OF CONTENTS
CHANGE HISTORY 1. 3
COPYRIGHT 2. 3
WARNINGS AND CAUTIONS 3. 4
ESD PROTECTION 4. 4
PCI OVERVIEW 5. 5
EXPLODED VIEW 6. 6
LEVEL 2 SOLDER COMPONENTS 7. 7
SERVICE DEVICES 8. 8
SW-UPDATE 9. 9
DISASSEMBLY - HINTS 110. 0
ASSEMBLY - HINTS 111. 7
LEGEND FOR QUICK TROUBLE SHOOTER 212. 0
QUICK TROUBLE SHOOTER - POWER ON 213. 1
QUICK TROUBLE SHOOTER - CHARGING 214. 2
QUICK TROUBLE SHOOTER - NO SERVICE 215. 3
QUICK TROUBLE SHOOTER - EARPIECE 216. 4
QUICK TROUBLE SHOOTER - IHF SPEAKER 217. 5
QUICK TROUBLE SHOOTER - DISPLAY 218. 6
QUICK TROUBLE SHOOTER - MICROPHONE 219. 7
QUICK TROUBLE SHOOTER - KEYMAT 220. 8
QUICK TROUBLE SHOOTER - AV CONNECTOR 221. 9
QUICK TROUBLE SHOOTER - VOLUME KEYS 322. 0
QUICK TROUBLE SHOOTER - CARD READER 323. 1
QUICK TROUBLE SHOOTER - CAMERA 324. 2
Training Content Creation
Markets, Care GTM
Multimedia Creation & Support CONFIDENTIAL
26.Mrz.2008
3
6300i RM-337 / 6301 RM-322/ 6301b RM-323
Copyright © 2006-2008 NOKIA Corporation. All rights reserved.
MGR
Page (32)
CHANGE HISTORY1.
COPYRIGHT2.
The purpose of this document is to help NOKIA service levels 1 and 2 workshop technicians to carry out service to
NOKIA products. This Service Manual is to be used only by authorized NOKIA service suppliers, and the content of it is
confidential. Please note that NOKIA provides also other guidance documents (e.g. Service Bulletins) for service suppliers, follow these regularly and comply with the given instructions.
While every endeavor has been made to ensure the accuracy of this document, some errors may exist.
If you find any errors or if you have further suggestions, please notify NOKIA using the address below:
CMO Operation & Logistics
Training and Vendor Development
Multimedia Creation & Support
mailto:Service.Manuals@nokia.com
Please keep in mind also that this documentation is continuously being updated and modified, so watch always out
for the newest version.
Copyright © 2008 Nokia. All rights reserved.
Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form
without the prior written permission of Nokia is prohibited.
Nokia, Nokia Connecting People, and Nokia X and Y are trademarks or registered trademarks of Nokia
Corporation. Other product and company names mentioned herein may be trademarks or tradenames of
their respective owners.
Nokia operates a policy of continuous development. Nokia reserves the right to make changes and
improvements to any of the products described in this document without prior notice.
Under no circumstances shall Nokia be responsible for any loss of data or income or any special, incidental,
consequential or indirect damages howsoever caused.
The contents of this document are provided “as is”. Except as required by applicable law, no warranties of
any kind, either express or implied, including, but not limited to, the implied warranties of merchantability
and tness for a particular purpose, are made in relation to the accuracy, reliability or contents of this
document. Nokia reserves the right to revise this document or withdraw it at any time without prior notice.
The availability of particular products may vary by region.
IMPORTANT
Thisdocumentisintendedforusebyqualiedservicepersonnelonly.
Status Version No. Date Comments
Draft 0.1 11.Oct.2007 Initial draft
Approved 1.0 12.Oct.2007 Approved
Approved 2.0 26.Mrz.2008 Approved
Training Content Creation
Markets, Care GTM
Multimedia Creation & Support CONFIDENTIAL
26.Mrz.2008
4
6300i RM-337 / 6301 RM-322/ 6301b RM-323
Copyright © 2006-2008 NOKIA Corporation. All rights reserved.
MGR
Page (32)
Warnings and Cautions
Please refer to the phone’s user guide for instructions relating to operation, care and maintenance including important safety information. Note also the following:
Warnings:
CARE MUST BE TAKEN ON INSTALLATION IN VEHICLES FITTED WITH ELECTRONIC ENGINE MANAGEMENT SYSTEMS 1.
AND ANTI–SKID BRAKING SYSTEMS. UNDER CERTAIN FAULT CONDITIONS, EMITTED RF ENERGY CAN AFFECT THEIR
OPERATION. IF NECESSARY, CONSULT THE VEHICLE DEALER/MANUFACTURER TO DETERMINE THE IMMUNITY OF VEHICLE ELECTRONIC SYSTEMS TO RF ENERGY.
THE HANDPORTABLE TELEPHONE MUST NOT BE OPERATED IN AREAS LIKELY TO CONTAIN POTENTIALLY EXPLOSIVE 2.
ATMOSPHERES, EG PETROL STATIONS (SERVICE STATIONS), BLASTING AREAS ETC.
OPERATION OF ANY RADIO TRANSMITTING EQUIPMENT, INCLUDING CELLULAR TELEPHONES, MAY INTERFERE WITH 3.
THE FUNCTIONALITY OF INADEQUATELY PROTECTED MEDICAL DEVICES. CONSULT A PHYSICIAN OR THE MANUFACTURER OF THE MEDICAL DEVICE IF YOU HAVE ANY QUESTIONS. OTHER ELECTRONIC EQUIPMENT MAY ALSO BE SUBJECT TO
INTERFERENCE.
Cautions:
1. Servicing and alignment must be undertaken by qualified personnel only.
2. Ensure all work is carried out at an anti–static workstation and that an anti–static wrist strap is worn.
3. Use only approved components as specified in the parts list.
4. Ensure all components, modules screws and insulators are correctly re–fitted after servicing and alignment.
5. Ensure all cables and wires are repositioned correctly.
Nokia requires that service points have sufficient ESD protection (against static electricity) when
servicing the phone.
Any product of which the covers are removed must be handled with ESD protection. The SIM card
can be replaced without ESD protection if the product is otherwise ready for use.
To replace the covers ESD protection must be applied.
All electronic parts of the product are susceptible to ESD. Resistors, too, can be damaged by static
electricity discharge.
All ESD sensitive parts must be packed in metallized protective bags during shipping and handling
outside any ESD Protected Area (EPA).
Every repair action involving opening the product or handling the product components must be
done under ESD protection.
ESD protected spare part packages MUST NOT be opened/closed out of an ESD Protected Area.
For more information and local requirements about ESD protection and ESD Protected Area, contact
your local Nokia After Market Services representative.
WARNINGS AND CAUTIONS3.
ESD PROTECTION4.
Training Content Creation
Markets, Care GTM
Multimedia Creation & Support CONFIDENTIAL
26.Mrz.2008
5
6300i RM-337 / 6301 RM-322/ 6301b RM-323
Copyright © 2006-2008 NOKIA Corporation. All rights reserved.
MGR
Page (32)
PCI OVERVIEW5.
1
14
11
12
17
10
7
8
2
3
4
5
9
6
15
16
13
17
6301 RM-322 / 6301b RM-323 / 6300i RM-337
Product Controls & Interfaces
Ver. 1.0
1
― Power key
2
― Nokia AV 2.5 mm connector
3
― Earpiece
4
― Left and right selection keys
5
― Call key
― Display
6
7
― Keypad
8
― Microphone
9
― Navi™ key. 4-way scroll key and
middle selection key.
10
11
12
― End key
13
14
― Loudspeaker
― Reminder LED’s
― Volume keys
16
17
― Camera lens
― Mini USB cab le connector
― Charger connector
15
― Strap holder
Training Content Creation
Markets, Care GTM
Multimedia Creation & Support CONFIDENTIAL
26.Mrz.2008
6
6300i RM-337 / 6301 RM-322/ 6301b RM-323
Copyright © 2006-2008 NOKIA Corporation. All rights reserved.
MGR
Page (32)
See corresponding ITEM/CIRCUIT REF in the Spare Parts Service Bulletins on NOL.
EXPLODED VIEW6.
WATER INGRESS LABEL
I9998 (RM-323 only)
A-COVER ASSY
I0001
= only available as
assembly
Ver. 1.0
UI SHIELD ASSEMBLY
I0004
LCD MODULE
I0005
CAMERA GASKET
I0015
PLASTIC CHAMBER (A2)
I0019
CAMERA
I0016
KEYMAT
I0002
DOMESHEET (A1)
I0006
LIGHT SWAP PWB (A1)
I0007
FLEX SHIELDING LID ASSY
I0017
HWA SHIELD LID (A1)
I0011
LABEL COVER ASSY (A3)
(LEVEL 3&4 ONLY)
I0030
USB CONNECTOR COVER
I0029
DC-JACK (A3)
I0028
C-COVER
I0032
MICROPHONE (A3)
I0027
TYPE LABEL (A1)
(LEVEL 3&4 ONLY)
I0014
RETU-TAHVO SHIELDING LID (A1)
I0009
BT SHIELDING LID (A1)
I0013
RAP MEM SHIELDING LID (A1)
I0010
RF SHIELDING LID (A1)
I0012
IHF SPEAKER
I0020
VOLUME KEY (A3)
I0024
POWER KEY (A3)
I0023
B-COVER (A3)
I0022
LED WINDOW RIGHT (A3)
I0026
SIDE WINDOW LEFT (A3)
I0025
ANTENNA RADIATOR (A2)
I0021
EARPIECE ASSEMBLY (A2)
I0018
= These parts can
not be reused
after removal.
6301 RM-322 / 6301b RM-323 / 6300i RM-337 EXPLODED VIEW
SCREW 1.6x4.5 TORX PLUS
I0003
SCREW M1.6x4.5 REMFORM
TORX PLUS
I0031
A2=ANTENNA MODULE ASSY
(I0018-I0019, I0021)
A3=D-COVER ASSY
(I0022-I0028, I0030)
A1=LIGHT SWAP PACKAGE
(I0006-I0014)
(LEVEL 3&4 ONLY)
Training Content Creation
Markets, Care GTM
Multimedia Creation & Support CONFIDENTIAL
26.Mrz.2008
7
6300i RM-337 / 6301 RM-322/ 6301b RM-323
Copyright © 2006-2008 NOKIA Corporation. All rights reserved.
MGR
Page (32)
LEVEL 2 SOLDER COMPONENTS7.
N6301 RM-322/ 6301b RM-323 / 6300i RM-337
Components overview
Solder components only for LEVEL 2
G2200
Ver. 1.0
E2102
E2101
X1001
X2070
F2000
E6001
E6003
E7501
E7502
E7503
S2401
V2405
V2406
V2407
V2409
V2412
V2413
S2402
S2403
Training Content Creation
Markets, Care GTM
Multimedia Creation & Support CONFIDENTIAL
26.Mrz.2008
8
6300i RM-337 / 6301 RM-322/ 6301b RM-323
Copyright © 2006-2008 NOKIA Corporation. All rights reserved.
MGR
Page (32)
SERVICE DEVICES8.
FLS-5 incl. ACF-8, Driver and User
Guide
Dongle and flash device incorporated
into one package, developed specifi-
cally for POS use.
ACF-8
Universal Power Supply is used to
power FLS-5.
Travel Charger AC-4
Small and lightweight charger for
fast charging of your phone battery.
DKE-2
Service Cable to connect the PC with
the mini USB connector.
SS-45
Camera removal tool. One side is for
disassembly, the other side for as-
sembly.
RJ-148
Soldering Jig
NMP Standard Toolkit (V2)
For more informations refer to the
Service Bulletin (SB-011) on NOKIA On-
line.
Supplier or manufacturer contacts for
tool re-order can be found in “Recom-
mended service equipment” docu-
ment on NOKIA Online.
Order code: 0772040
Internal Battery BL-4c
Inserted under the back cover, this
Li-Ion battery provides power in a
lightweight package.
RJ-230
Universal Soldering Jig.
Order code: 0780264
Training Content Creation
Markets, Care GTM
Multimedia Creation & Support CONFIDENTIAL
26.Mrz.2008
9
6300i RM-337 / 6301 RM-322/ 6301b RM-323
Copyright © 2006-2008 NOKIA Corporation. All rights reserved.
MGR
Page (32)
SW-UPDATE9.
Flash Concept – (Point of Sales)
To use FLS-5 Flash Dongle you have to follow the user guide inside the sales package. Please check always for the
latest version of flash software, which is available on
NOKIA Online.
Training Content Creation
Markets, Care GTM
Multimedia Creation & Support CONFIDENTIAL
26.Mrz.2008
10
6300i RM-337 / 6301 RM-322/ 6301b RM-323
Copyright © 2006-2008 NOKIA Corporation. All rights reserved.
MGR
Page (32)
DISASSEMBLY - HINTS10.
1. Needed tools: SRT-6, metal tweezers, SS-93, SS-45 camera
removal tool, a straight bladed screwdriver, dental pick, bit
holder with a torx plus size 6 bit, a torque driver, DC plug
2.Alwayscoverthewindowswithaprotectivelm.
3. Shift out the C-COVER.
4. Note! Before disassembling the phone, make sure that
the micro SD card has been removed. Remove both screws in
the order shown.
5. Remove the screws.
6. Unlock the plastic clips of the A-COVER with the SRT-6…
Loading...