Nokia 6282, RM 79 Service Manual

CMO Operations & Logistics WW Competence Transfer MMultimedia Creation & Support

Page (27)

CONFIDENTIAL

SERVICE MANUAL

Level 1&2

RM-79

Transceiver characteristics:

Dual Band: EGSM and WCDMA

- GSM: Tri-band phone for GSM 850/1800/1900MHz

- WCDMA: 1900MHz

Camera:- Camera 1 Megapixel with 8x digital zoom

Display: Active matrix color display with 262.144 colors,

resolution 320 x 240 pixel

Bluetooth

IRDA

Visual radio

Vibra Alert: Small round Vibra motor

Connector: Easy Flash connector

Approved 1.0

MGR

05.12.2005

Transceiver with BP-6m 970mAh Li-Ion battery pack

Talk time Standby Note

EGSM WCDMA EGSM WCDMA

up to 3h up to 2.5h up to 250h up to 200h

Environmental characteristics:

• Lead-free soldered

Depends on network parameters

Page (27)

CMO Operations & Logistics WW Competence Transfer MMultimedia Creation & Support CONFIDENTIAL

Approved 1.0

MGR

05.12.2005

TABLE OF CONTENTS

10.

11.

12.

INTRODUCTION 3

GENERAL REPAIR INFORMATION

PATHFINDER FOR WORKSHOP STAFF

EXPLODED VIEW AND COMPONENT DISPOSAL

SPARE PARTS OVERVIEW

SPARE PARTS LIST

SERVICE TOOLS

SW-UPDATE 1

DISASSEMBLY INSTRUCTION (UPPER PART) 1

DISASSEMBLY INSTRUCTION (LOWER PART) 1

LEGEND FOR QUICK TROUBLE SHOOTER 1

QUICK TROUBLE SHOOTER PART 1 1

Page

13.

14.

15.

16.

17.

18.

19.

20.

21.

QUICK TROUBLE SHOOTER PART 2 2

QUICK TROUBLE SHOOTER PART 3 2

QUICK TROUBLE SHOOTER PART 4 2

CAMERA GONOGO TEST 2

BLUETOOTH & INFRARED TEST 2

GONOGO TEST 2

BATTERY TEST 2

FORWARDING OF REPAIRS 2

ESD PROTECTION REQUIREMENTS 2

CHANGE HISTORY

Status Version No. Date Comments

Draft 0.1 08.11.2005 Initial draft

Approved 1.0 05.12.2005 Approved

Page (27)

CMO Operations & Logistics WW Competence Transfer MMultimedia Creation & Support CONFIDENTIAL

Approved 1.0

MGR

05.12.2005

INTRODUCTION1.

The purpose of this document is to help NOKIA service levels 1 and 2 workshop technicians to carry out service to NOKIA products. This Service Manual is to be used only by authorized NOKIA service suppliers, and the content of it is confidential. Please note that NOKIA provides also other guidance documents (e.g. Service Bulletins) for service suppliers, follow these regularly and comply with the given instructions.

While every endeavor has been made to ensure the accuracy of this document, some errors may exist. If you find any errors or if you have further suggestions, please notify NOKIA using the address below: mailto:cc-ts-rc.documentation@nokia.com

Please keep in mind also that this documentation is continuously being updated and modified, so watch always out for the newest version.

Warnings and Cautions

Please refer to the phone’s user guide for instructions relating to operation, care and maintenance including important safety information. Note also the following:

Warnings:

CARE MUST BE TAKEN ON INSTALLATION IN VEHICLES FITTED WITH ELECTRONIC ENGINE MANAGEMENT SYSTEMS AND

1. ANTI–SKID BRAKING SYSTEMS. UNDER CERTAIN FAULT CONDITIONS, EMITTED RF ENERGY CAN AFFECT THEIR OPERATION. IF NECESSARY, CONSULT THE VEHICLE DEALER/MANUFACTURER TO DETERMINE THE IMMUNITY OF VEHICLE ELECTRONIC SYSTEMS TO RF ENERGY.THE HANDPORTABLE TELEPHONE MUST NOT BE OPERATED

2. IN AREAS LIKELY TO CONTAIN POTENTIALLY EXPLOSIVE ATMOSPHERES EG PETROL STATIONS (SERVICE STATIONS), BLASTING AREAS ETC. OPERATION OF ANY RADIO TRANSMITTING EQUIPMENT, INCLUDING CELLULAR TELEPHONES, MAY INTERFERE WITH THE

3. FUNCTIONALITY OF INADEQUATELY PROTECTED MEDICAL DEVICES. CONSULT A PHYSICIAN OR THE MANUFACTURER OF THE MEDICAL DEVICE IF YOU HAVE ANY QUESTIONS. OTHER ELECTRONIC EQUIPMENT MAY ALSO BE SUBJECT TO INTERFERENCE.

Cautions:

1. Servicing and alignment must be undertaken by qualified personnel only.

2. Ensure all work is carried out at an anti–static workstation and that an anti–static wrist strap is worn.

3. Use only approved components as specified in the parts list.

4. Ensure all components, modules screws and insulators are correctly re–fitted after servicing and alignment.

5. Ensure all cables and wires are repositioned correctly.

Electrostatic discharge can easily damage the sensitive components of electronic products. Therefore every Service Supplier has to take care of all precautions, which are mentioned in the service level related “Service Partner Requirements”, available on NOKIA Online. Also see ESD Protection Requirements in this Service Manual.

(27)

Page

CMO Operations & Logistics WW Competence Transfer MMultimedia Creation & Support CONFIDENTIAL

Approved 1.0

05.12.2005

GENERAL REPAIR INFORMATION2.

In this section the technician will get some general hints how to carry out repairs:

To familiarize oneself with NOKIA product read the tutorials or user guide on www.nokia.com -->Support--> Phones,

• by selecting the Phone Model. Before starting the repair you must take care of ESD precautions like being in your ESD Protected Area and connecting

• your wristband. Use gloves to avoid corrosion and fingerprints.

• Protect windows and displays with a film to avoid dust and scratches.

• When cleaning the LCD Module any lint-free cloth can be used (e.g. Micro-Fibre cloth).

• When cleaning the pads you have to use a soft cloth/ESD brush and Isopropanol. It is not allowed to use a glass fiber

• pencil because it scratches the surface and will lead later on to corrosion. Mechanical parts (except shielding lids and bent parts), which didn’t repair the failure, can be reused, if they are not

• soldered. When removing the shielding lids make sure to replace them with new ones, otherwise the high-frequency leakage

• can have an influence on the device. Always use original NOKIA spare parts.

• Check the soldering joints of the parts, which are concerned regarding the indicated error (e.g. soldered connectors or

• switches) and resolder them if necessary (Level 2 only). Remove redundant soldering flux after repair.

• Meet the torque requirements when assembling the unit (see also the document “torques for transceiver assembly”

• on NOKIA Partner Web Site/NOKIA Online). Always use your own equipment for testing where you are sure that it works. E.g. if the customer complains about

• charger function, please test the phone with your own charger to be sure if phone or charger causes the malfunction. A SIM card is needed for all GoNoGo tests.

• When doing the fault log entries, always note the Item code, which caused the malfunction. Also, fill in the appropri-

• ate part code from the assembly, if needed. Please be aware that some malfunctions could be software related and solved by an update.

•

MGR

There are several documents available on NOL, which have to be followed:

•

First, take care for the latest content pages of Service Bulletins, which are always available for each folder on NOKIA

• Online. This is also important to recognize, if existing documents have become invalid.

The service level indicator at the bottom of each document tells the appropriate destination.

•

Downloads > Support Library >

1. Instructions

2. General Service Bulletins

3. Product related documents

4. Spare Part Service Bulletins

5. Service Tools Service Bulletins

6. Common Software Service Bulletins etc,…

Use General SB-217 as a reference or overview.

Please also check NOKIA Online (NOL) for latest news and files on a regular basis.

Page (27)

CMO Operations & Logistics WW Competence Transfer MMultimedia Creation & Support CONFIDENTIAL

Approved 1.0

MGR

05.12.2005

PATHFINDER FOR WORKSHOP STAFF3.

In addition to the information in this Service Manual, there are several instructions and information, which have to be followed. Main documentation database is NOKIA Online with the purpose of serving different multimedia content, like video clips or interactive tutorials.

It is mandatory to watch for newest technical and organizational information on a daily basis to be updated as required (see “Latest files in Support Library”). Every new information has to be processed and implemented as soon as possible. When logged into NOL you can also find needed information in different folder like:

Support Library Phones

Service Manuals Service Bulletins Software Repair Information

Level 1&2 e-learning (former NOKIA CarePoint) on NOKIA Online

Online Troubleshooting

Former NOKIA CarePoint content, such as

• Product information

• Videos – Disassembly/Assembly

•

can be found on

NOKIA Online

Care Services

Training

Phone Models

Level 1&2 e-learning courses offer a quick overview of the NOKIA phone and support for how to repair and use the phone:

Overview & Guides

Basic information about the phone,

features and technologies

Disassembly & Assembly

Instructions how to disassemble and

assemble the phone

Troubleshooting

Step-by-step instructions on how to locate and repair the most common

problems with the phone

To reduce the server traffic it is recommended to download newest version of huge files like videos, Phoenix packages or Service Manuals only once and distribute it internally for further use.

Page (27)

ELECTRO

SILICON METAL

PLASTIC

PWB

COVER

POWER KEY (A1)

I002

A-COVER (A1) I001

LCD MODULE

I007

VGA CAMERA

(ONLY 6280 RM-78)

I008

DISPLAY METAL SHIELD

I004

SMIA CAMERA

I209

B-COVER

I227

UI KEYMAT I003

4XSCREWS T6+ M1.6X4.0 I226

POWER SWITCH (A4)

I105

UI PWB ADHESIVE (A5) I106

POWER KEY

ADHESIVE (A5)

I107

C-COVER FIXED LOWER PART (A5) I111

C-COVER UPPER PART (A5)

I108

ENGINE MODULE (A7) I204

RF SHIELDING LID (A7)

I206

WCDMA SHIELDING LID (A7)

I208

BB SHIELDING LID (A7) I207

MAIN DOMESHEET (A7) I203

TYPE LABEL (A7) (LEVEL 3/4 only)

I205

BACKPLATE

STICKER (A5)

I112

MAIN FLEX (A4)

I104

KEYMAT (A6) I201

IHF LABEL (A8)

I220

IHF GASKET (A8) I223

IHF SPEAKER (A8)

I222

DC-JACK (A8) I215

MICROPHONE (A8) I216

POC KEY (A8)

I210

VOLUME KEY (A8)

I211

A1= A-COVER ASSY A2= UI PWB ASSY A3= CAMERA GUIDE ASSY A4= MAIN FLEX ASSY A5= C-COVER ASSY A6= KEYMAT ASSY A7= LIGHT SWAP ENGINE MODULE ASSY A8= D-COVER ASSY

= only available as assembly

CAMERA KEY (A8) I212

SD LID (A8) I213

SIM LID (A8) I219

LED FLASH LIGHT (A8)

(ONLY 6280 RM-78)

I218

D-COVER (A8) I217

BT ANTENNA (A8) I225

ANTENNA (A8)

I224

IRDA WINDOW (A8) I214

IHF LID INCL. POGO PINS (A8)

I221

MAIN KEYMAT ADHESIVE (A6) I202

3X CONNECTORS (A4)

I103

DOMESHEET (A2) I005

UI PWB (A2) I006

CAMERA GUIDE (A3)

I009

EARPIECE (A3)

I011

EARPIECE ADHESIVE (A3) I010

SPRING DETECTION MAGNET (A4) I102

SLIDE MECHANICS (A5) I110

SPRING (A5) I109

CAMERA SOCKET (A4) (ONLY 6280 RM-78) I101

Approved 1.0

CMO Operations & Logistics WW Competence Transfer MMultimedia Creation & Support CONFIDENTIAL

05.12.2005

EXPLODED VIEW AND COMPONENT DISPOSAL4.

Recommendation for the ecologically friendly disposal of components. Colorized components show the different categories. See corresponding ITEM/CIRCUIT REF in the Spare Parts Service Bulletins on NOL.

MGR

Page (27)

A1 = A-COVER ASSY

A4 = MAIN FLEX ASSY

A7 = LIGHT SWAP ENGINE

MODULE ASSY

A6 = KEYMAT ASSY

A5 = C-COVER ASSY

A8 = D-COVER ASSY

A2 = UI PWB ASSY

A3 = CAMERA GUIDE ASSY

POWER KEY (A1) I002

A-COVER (A1) I001

LCD MODULE I007

VGA CAMERA (ONLY 6280 RM-78) I008

DISPLAY METAL SHIELD I004

SMIA CAMERA I209

B-COVER (6280 RM-78) I227

B-COVER (6282 RM-79) I227

A1= A-COVER ASSY A2= UI PWB ASSY A3= CAMERA GUIDE ASSY A4= MAIN FLEX ASSY A5= C-COVER ASSY A6= KEYMAT ASSY A7= LIGHT SWAP ENGINE MODULE ASSY A8= D-COVER ASSY

= only available as assembly

UI KEYMAT I003

4XSCREWS T6+ M1.6X4.0 I226

CAMERA SOCKET (A4) (ONLY 6280 RM-78) I101

POWER SWITCH (A4) I105

UI PWB ADHESIVE (A5) I106

POWER KEY ADHESIVE (A5) I107

SPRING (A5) I109

C-COVER FIXED LOWER PART (A5) I111

C-COVER UPPER PART (A5) I108

ENGINE MODULE (A7) I204

RF SHIELDING LID (A7) I206

WCDMA SHIELDING LID (A7) I208

BB SHIELDING LID (A7) I207

MAIN DOMESHEET (A7) I203

TYPE LABEL (A7) (LEVEL 3/4 only) I205

BACKPLATE STICKER (A5) I112

SLIDE MECHANICS (A5) I110

MAIN FLEX (A4) I104

SPRING DETECTION MAGNET (A4) I102

KEYMAT (A6) I201

IHF LABEL (A8) I220

IHF GASKET (A8) I223

IHF SPEAKER (A8) I222

DC-JACK (A8) I215

MICROPHONE (A8) I216

POC KEY (A8) I210

VOLUME KEY (A8) I211

CAMERA KEY (A8) I212

SD LID (A8) I213

SIM LID (A8) I219

LED FLASH

LIGHT (A8)

(ONLY 6280 RM-78) I218

D-COVER (A8) I217

BT ANTENNA (A8) I225

ANTENNA (A8) I224

IRDA WINDOW (A8) I214

IHF LID INCL. POGO PINS (A8) I221

MAIN KEYMAT ADHESIVE (A6) I202

3X CONNECTORS (A4) I103

DOMESHEET (A2) I005

UI PWB (A2) I006

CAMERA GUIDE (A3) I009

EARPIECE (A3) I011

EARPIECE ADHESIVE (A3) I010

CMO Operations & Logistics WW Competence Transfer MMultimedia Creation & Support CONFIDENTIAL

SPARE PARTS OVERVIEW5.

Approved 1.0

MGR

05.12.2005

Page (27)

CMO Operations & Logistics WW Competence Transfer MMultimedia Creation & Support CONFIDENTIAL

Approved 1.0

MGR

05.12.2005

SPARE PARTS LIST6.

Please exchange this page (placeholder) with latest corresponding Service Bulletins (spare parts, SWAP units and service tools) from NOL!

This will ensure, that you are using up-to-date order codes only.

Therefore Service Bulletins have to be checked from NOL on daily basis.

Page

CMO Operations & Logistics WW Competence Transfer MMultimedia Creation & Support CONFIDENTIAL

SERVICE TOOLS7.

FLS-4S incl. ACF-8, Driver and User Guide

Dongle and flash device incorporated into one package, developed specifically for POS use.

(27)

Approved 1.0

MGR

05.12.2005

ACF-8

Universal Power Supply is used to power FLS-4S.

Travel Charger AC-4

Small and lightweight charger with smaller charging plug to charge your phone battery fast.

Internal Battery BP-6M

Inserted under the back cover, this Li-Ion 970 mAh battery provides power in a lightweight package.

Headset HS-23

Small and lightweight stereo headset with handsfree functionality, volume control, Push to talk support, and comfortable earpieces for listening to the FM radio or MP3 player in compatible phones.

SS-45

Camera removal tool for 1 Megapixel camera

+ 18 hidden pages