Nokia 6185 User Manual

OWNER’S MANUAL

Keys

(Power key)
Press and hold to turn your phone on or off.
Earpiece
Press the scroll keys up or down during a call to adjust the lis­tening volume.
(Scroll keys)
Scroll through menus, sub­menus, and the phone book. Press and hold for continuous scrolling.
Use this key to dial and answer phone calls.
Press this key to select special characters when entering text and numbers.
Menu Names
Fixed antenna
Do not attempt to extend or remove!
(Softkeys)
Their current function is dis-
played above the key; these labels change when accessing the various phone features.
Push this key to end a phone call or to return to the start screen.
Press to select upper or lower
case letters when editing text. Press and hold while
or is displayed to enter numbers rather than letters.
Use this key to enter an empty space between letters when entering text.

Indicator s a n d Icons

You have an active call. The phone is waiting for you to enter numbers or text . You have turned off your phone’s keypad tones,
warning tones, message alert tones, and set your ringing tone to
Keyguard has been activated to help prevent any
.
accidental keypresses. You have one or more voice messages waiting. You have one or more unread text messages waiting. Digital service is available. Your phone is roaming outside of your home system/
area. Any characters you ent er wi ll be upper-cas e lett ers or
numbers. Press the # key to switch letter case. Any characters you enter will be lower-case letters or
numbers. Press the # key to switch letter case. Appears when you press and hold the # key while
editing text. Only numbers can be entered while in this mode.
The alarm clock is set. Your phone is ready to place or receive a data call. You have a reminder in your calendar to do something
(appears only on Calendar display). You have a reminder in your calendar that it’s
someone’s birthday (appears only on Calendar display).
You have a reminder in your calendar to call someone (appears only on Calendar display).
You have a reminder in your calendar of a meeting (appears only on Calendar display).
Silent
.

Table of Contents

1. Safety At A Glance . . . . . . . . . . . . . . . . . . . 1
2. Getting Connected. . . . . . . . . . . . . . . . . . . . 3
Attaching your battery. . . . . . . . . . . . . . . . . . . . . . . . . . 3
Charging your new battery . . . . . . . . . . . . . . . . . . . . . . 3
When is a good time to charge?. . . . . . . . . . . . . . . . 4
When is charging complete?. . . . . . . . . . . . . . . . . . . 4
Discharging NiMH batteries . . . . . . . . . . . . . . . . . . . 5
Removing the battery. . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Important Battery Information . . . . . . . . . . . . . . . . . . . 6
Cool Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
3. Using Your Phone. . . . . . . . . . . . . . . . . . . . . 8
What is the ‘start screen’?. . . . . . . . . . . . . . . . . . . . . . . 8
Navigating tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Scrolling through the main menu . . . . . . . . . . . . . . . . . 9
Menu and submenu numbering. . . . . . . . . . . . . . . . . . 10
Using Shortcuts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Help Text. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Summary of Menu Items . . . . . . . . . . . . . . . . . . . . . . . 11
4. The Basics . . . . . . . . . . . . . . . . . . . . . . . . . 13
Switching the phone on and off . . . . . . . . . . . . . . . . . 13
Getting a strong signal. . . . . . . . . . . . . . . . . . . . . . . . . 13
Making a call. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Ending a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Answering a call. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Keyguard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
5. Your Phone A to Z . . . . . . . . . . . . . . . . . . . 17
ABC/abc mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Access codes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Alarm clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
All calls timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Automatic answer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Automatic redial. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Call forwarding. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Call log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Call restrictions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
i
Call settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Call timers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Call waiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Caller ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Calling card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Clear call lists. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Clear timers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Clock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Conference call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Current call timer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Custom Tone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Assigning a custom ringing tone to a
name and number. . . . . . . . . . . . . . . . . . . . . . . . . . .33
Removing a name and number from the list . . . . .33
Data and fax calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Dialed calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Earpiece volume. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Emergency calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Emergency key 9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Entering text and numbers. . . . . . . . . . . . . . . . . . . . . .36
Fax calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Games . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Inbox. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
In-call menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Keypad tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Last number redial. . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Life timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Listen to voice messages. . . . . . . . . . . . . . . . . . . . . . . .43
Lock code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Changing your lock code . . . . . . . . . . . . . . . . . . . . .44
Manual touch tones . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Memory status. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Message alert tone . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Microphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Missed calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
NAM selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
NAM update. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
ii
Network feature setting. . . . . . . . . . . . . . . . . . . . . . . . 48
Network services. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
One-touch dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Paging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Phone book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Accessing the phone book. . . . . . . . . . . . . . . . . . . . 51
Storing a name and number . . . . . . . . . . . . . . . . . . 52
Changing a number stored with a name . . . . . . . . 52
Recalling names and numbers . . . . . . . . . . . . . . . . 52
Recalling numbers by name . . . . . . . . . . . . . . . . . . 53
Erasing stored names and numbers . . . . . . . . . . . . 53
Erasing your entire phone book . . . . . . . . . . . . . . . 53
Phone lock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Phone settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Customizing profiles and other options . . . . . . . . . 55
Renaming profiles . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Received calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Restore factory settings. . . . . . . . . . . . . . . . . . . . . . . . 57
Restrict calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Restricting incoming and outgoing calls. . . . . . . . 57
Adding outgoing and incoming call restrictions . . 58
Ringing options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Ringing tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Ringing volume. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Scrolling view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Security settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Security code. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Changing your security code. . . . . . . . . . . . . . . . . . 62
Send own caller ID with next call. . . . . . . . . . . . . . . . 63
Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Storing a name and number . . . . . . . . . . . . . . . . . . . . 64
Quick save. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Synchronization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
System Selection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Roaming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Roaming indicators . . . . . . . . . . . . . . . . . . . . . . . . . 65
System choices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Custom menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
If you have more than one phone number. . . . . . . 67
iii
Text messages and paging . . . . . . . . . . . . . . . . . . . . . .67
Reading text messages. . . . . . . . . . . . . . . . . . . . . . .68
Erasing a text message. . . . . . . . . . . . . . . . . . . . . . .69
Erasing all text messages. . . . . . . . . . . . . . . . . . . . .69
Receiving a page. . . . . . . . . . . . . . . . . . . . . . . . . . . .69
Touch tone length . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70
Touch tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70
Storing touch tone strings . . . . . . . . . . . . . . . . . . . .70
Sending a touch tone string. . . . . . . . . . . . . . . . . . .71
Unlocked phone number. . . . . . . . . . . . . . . . . . . . . . . .72
Vibrating alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73
Voice mailbox number. . . . . . . . . . . . . . . . . . . . . . . . . .73
Voice messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73
Setting up your voice mailbox. . . . . . . . . . . . . . . . .74
Greetings, passwords, and prompts. . . . . . . . . . . . .74
Listening to your voice messages. . . . . . . . . . . . . . .74
Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74
Earpiece volume . . . . . . . . . . . . . . . . . . . . . . . . . . . .74
Ringing volume. . . . . . . . . . . . . . . . . . . . . . . . . . . . .75
Warning and game tones . . . . . . . . . . . . . . . . . . . . . . .75
Welcome note . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76
6. Data and Fax Calls . . . . . . . . . . . . . . . . . . .77
Getting started. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Configuring your data or fax software. . . . . . . . . . . . .78
To start a data or fax call . . . . . . . . . . . . . . . . . . . . . . .78
To receive a data or fax call . . . . . . . . . . . . . . . . . . . . .79
Manual selection of incoming data/fax calls . . . . . . .79
7. Accessories . . . . . . . . . . . . . . . . . . . . . . . . .81
Batteries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Charging Times . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82
Standby and Talk Times . . . . . . . . . . . . . . . . . . . . . .82
Chargers and Other Accessories. . . . . . . . . . . . . . . . . .83
8. Troubleshooting . . . . . . . . . . . . . . . . . . . . . 85
9. Reference Information . . . . . . . . . . . . . . . . 86
10. Technical Data . . . . . . . . . . . . . . . . . . . . . . 91
11. Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . 92
12. Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
iv

1. Safety At A Glance

Read these simple guidelines before using your phone. Failure to comply with these guidelines may be dangerous or illegal.
For more detailed safety information, “Important Safety Information” on page86.
Road Safety Comes First
Don’t use a hand-held phone while driving; park the vehicle first.
Switch Off In Hospitals
Switch off your phone when near medical equipment. Follow any regulations or rules in force.
Switch Off On Aircraft
Mobile phones can cause interference. Using them on aircraft is illegal.
Switch Off When R e fueling
Do not use the phone at a refueling point. Do not use near fuels or chemicals.
Switch Off Near Blasting
Do not use the phone where blasting is in progress. Observe restrictions, and follow any regulations or rules in force.
Interference
All mobile phones may get interference which could affect performance.
Use Sensibly
Use only in the normal position (to ear). Avoid unnecessary contact with the antenna when phone is on.
Qualified Service
Only qualified service personnel may install or repair cellular phone equipment.
1
Accessories and Batteries
Use only approved accessories and batteries. Do not connect incompatible products.
FCC/Industry Canada Notice
Your phone may cause TV or radio int erference (e.g. when using a telephone in close proximity to receiving equipment). The FCC/ Industry Canada can require you to stop using your telephone if such interference can not be eliminated. If you require assistance, contact your local service facility.
This device complies with part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interference.
Using this Guide
The wireless phone described in this guide is approved for use in CDMA/AMPS networks.
A number of features included in this guide are called Network Services. They are special services provided by wireless service providers. Before you can take advantage of any of these Network Services, you must subscribe to the service(s) from your home service provider and obtain instructions for their use.
Disclaimer
It’s possible that you may not be able to activate your phone on all wireless systems. Please see your service provider for details.
2

2. Getting Connected

This section will help you understand the ins and outs of charging and using your battery.

Attaching your battery

Simply place the battery in the grooves on the back of your phone. Then slide the battery upward until it clicks.
Note: Use only those batteries approved by the phone manufacturer and recharge your battery only with the chargers approved by the manufacturer.
See “Important Battery Information” on page6.

Charging your new battery

Your phone can be used with either a rechargeable Li-Ion or NiMH battery. Note that a new battery’s full performance is achieved only after two or three complete charge and discharge cycles.
With your phone powered on or off, connect the lead from the charger to the bottom of your phone. You can also place your phone on the charging stand (with the stand connected to a standard 120V AC outlet via either the ACP-7U or ACP-9U AC/DC adaptors).
When the battery begins charging, your phone will beep once and the battery strength indicator on the right side of the display will begin to scroll after a few seconds.
3
If your phone displays suspended. Check that th e battery is connect ed only to an approved charging device. If the battery is very hot or cold, wait for a while; charging will automatically resume after the battery is restored to its normal operating temperature. If charging still fails, contact your dealer.
When a charger is not in use, disconnect it from the power source. Do not leave th e battery connect ed to a charger for longer than a week, since ov ercharging may shorten its lif e.
Important
discharge itself over time.
: If left unused, a fully charged battery will
Not charging
, charging is

When is a good time to charge?

Actually, you can charge anytime. If you have a NiMH battery, you should allow it to completely discharge once in a while.
When your phone beeps once and displays you only have a couple of minutes of talk time remaining. The repetition rate of these battery-low warnings depend on the remaining battery capacity and the battery condition. These warnings are more frequent when you’re in a call.
Note: The phone will not give you the warning tone under certain conditions. See “Warning and game tones” on page75.
Once all the power has drained from your battery, you’ll hear three beeps wi th the m essage your display. At this point, your phone will switch itself off and you’ll need to recharge your battery.
Battery low
Recharge battery
on
,

When is charging complete?

When the charge indicators stop scrolling, your phone is considered fully charged. However, a slight increase in charge may occur if your phone is left connected to the charger for a couple more hours. This is called “trickle charge” or “maintenance charge.”
4
Charging times depend on the type of battery and charger used.
For approximate charging and operating times, see “Batteries” on page81.
Can you make calls while charging?
Yes, you can. But your battery may not charge while a call is in progress (depending on which charger you are using). Charging should resume once you end the call.
See "Chargers and Other Accessories" on page 83 for more information.

Discharging NiMH batteries

A NiMH battery lasts longer and performs better if you fully discharge it from time to time. To discharge the battery, leave your phone switched on until the battery is drained. The phone will display several messages that the battery is low and that you need to recharge it; just ignore them.
You can also use the battery discharge feature of any approved accessory available for your phone. Do not attempt to discharge the battery by any means other than those just described.

Removing the battery

Note: Switch off the phone before removing the battery!
1.
Press and hold the button at the top of the battery.
2.
Slide the battery toward the bot­tom of the phone.
3.
Lift the battery off the phone.
5

Important Battery Information

• The battery can be charged and discharged hundreds of times but it will eventually wear out. When the operating time (talk time and standby time) is noticeably shorter than normal, it is time to buy a new battery.
• Use only batteries approved by the phone manufacturer and recharge your battery only with the chargers approved by the manufacturer. When a charger is not in use, disconnect it from the power source. Do not leave the battery connected to a charger for longer than a week, since overcharging may shorten its life. If left unused a fully charged battery will discharge itself over time.
• (NiMH batteries only) For optimal operation, discharge the battery from time to time by leaving your phone switch ed on until it turns itself off. You can also use the battery discharge feature of any approved accessory available for your phone. Do not attempt to discharge the battery by any other means.
• Temperature extremes will affect the ability of your battery to charge: allow it to cool down or warm up first.
• Use the battery only for its intended purpose.
• Never use any charger or battery which is damaged or worn out.
• Do not short circuit the battery. Accidental short circuiting can occur when a metallic object (coin, clip, or pen) causes direct connection of the + and - terminals of the battery (metal strips on the back of the battery), for example when you carry a spare battery in your pocket or purse. Short circuiting the terminals may damage the battery or the connecting object.
• Leaving the battery in hot or cold places, such as in a closed car in summer or winter conditions, will reduce the capacity and lifetime of the battery. Always try to keep the battery between 59º F and 77º F (15º C and 25º C). A phone with a hot or cold battery may temporarily not work, even when the battery is fully charged. NiMH batteries’ performance is particularly limited in temperatures below 14º F (-10º C). Li-Ion batteries’ performance is particularly limited in temperatures below 32º F (0º C).
• Do not dispose of batteries in a fire!
• Dispose of used batteries in accordance with any local regulations.
6

Cool Features

All the features in your phone are cool. It’s just that some are cooler than others!
For example, did you know that you can lock the keys on your phone to prevent accidental key presses and phone calls? Or that you can call someone with the touch of a single button? You can also stop your phone from ringing without even answering the call.
These are just some of the many Cool Features you’ll find in your phone. Look for the icon throughout this owner’s manual to find them.
7

3. Using Your Phone

The first few days you have your phone, play with it to learn how the menu and submenu system works. The more you learn how to access these menus and submenus, the more fun you’ll have with your phone.
This section describes the different methods of using your phone menus and submenus.

What is the ‘start screen’?

The start screen appears when you first turn your phone on, in its idle state.
Anytime you want to get to the start screen, press , except during a call (unless you want to hang up).
CAUTION:
requesting input (for example, a setting, phone number, name, etc.), the phone displays the start screen, the input is not saved, and the option is not selected.

Navigating tools

Softkeys
Your phone has two softkeys that appear below the display. Their current function is indicated by the words appearing above them. Simply press the corresponding key under the choice you wish to select.
This illustration shows the phone at the start screen. The start screen always displays on the right. menus and submenus. phone book.
See “Using Shortcuts” on page10 and “Phone book” on page 51.
If you press when the phone is
Menu
on the left and
Menu
allows you to access your phone’s
Names
allows you to access your
Names
8
Scroll key
Your phone has a scroll key located just below your display. It has two arrows on it that look like Press the scroll key up or down to navigate through your phone’s menus and submenus. You can also use it to scroll through names and numbers in your phone book.
Also, when editing names and numbers (e.g. numbers in your phone book), you may notice a cursor flashing within the name or number. Pressing the scroll key up or down moves the cursor within the text, allowing you to insert letters, numbers, or special characters via the keypad.
See “Entering text and numbers” on page36 for more details.
V
and W.
Scroll bar
When you access your phone’s men u and submenus, you will notice a scroll bar at the far right of the screen. This bar indicates where you are in the menu structure; each “tab” on the bar represents a different menu item.
For example, press
Menu
once. The scroll bar appears
with the first (top) tab displayed. A different tab appears
W
each time you press the
or V key to move up and down through the menu structure. The scroll bar works the same way with submenus.

Scrolling through the main menu

Menu
Press reach the desired menu item.
Press submenus and to choose options.
Press one level.
at the start screen. Then press W or V to
Select, Options or OK
Exit
to exit the present menu or
(whichever appe ars) to ent er
Back
to go back
9

Menu and submenu numbering

When you scroll to a menu or submenu, the menu number and/or submenu number appears on the display above the scroll bar. If you become familiar with these numbers, you can use them as shortcuts for accessing different menus.
Settings
Call log
), submenu 3
4-3
For example, when you scroll to Menu 2 ( number 2 appears in the top right-hand corner of the display. If you scroll to menu 4 (
Security settings
( top right-hand corner.
See “Summary of Menu Items” on page11 for a list of your phone’s features along with their menu locations.
Also, see “Using Shortcuts” on page10.
), your phone will display

Using Shortcuts

Now that you know about shortcuts, use them as a quick and easy way to access a menu without having to scroll through other menus.
Menu
Press For example, press dialed calls feat ur e (
Press the menu and submenu numbers within a couple of seconds of each other when using this method.
For a summary of your phone’s menu structure, see “Summary of Menu Items” on page11.
, then menu number, the n submenu number.
Menu
, then 2, then 3 to access the
Menu
2-3).
) the
in the

Help Text

If you’re not sure how a feature works, wait just a few seconds and help text will automatically appear for most of your phone’s features. Press of the text or help text will disappear by itself.
Back
to exit the help text. After a while, the
More
to see the next page
10

Summary of Menu Items

01Messages
01-1 Text Mess age s
01-1-1 Inbox 01-1-2 Saved 01-1-3 Erase all
01-2 Voice messages
01-2-1 Listen to voice messages 01-2-2 Voice mailbox number
01-3 Welcome Note
2Call log
2-1 Mi ssed calls 2-2 Re ce ived calls 2-3 Di a led calls 2-4 Cle a r call lists
2-4-1 All 2-4-2 Missed 2-4-3 Received 2-4-4 Dialed
2-5 Call t imers
2-5-1 Last call 2-5-2 All calls 2-5-3 Life timer 2-5-4 Clear timers
3Profiles
3-1 Normal
3-2 Silent 3-3 Meeting
(the following options appear in all profiles)
3-1-1 Select 3-1-2 Customize
3-1-2-1 Ringing options 3-1-2-2 Ringing volume 3-1-2-3 Ringing tone 3-1-2-4 Vibrating alert 3-1-2-5 Keypad tones 3-1-2-6 Warning and game tones 3-1-2-7 Message alert tone 3-1-2-8 Lights 3-1-2-9 Automatic answer
3-1-3 Rename
(appears only in
(appears only in
(not available in
Car
Car
and
Normal
)
Headset
Car
,
,
or
)
Headset
)
11
3-4 Outdoor 3-5 Pager 3-6 Car 3-7 Headset
(appears only after phone is connected to a car kit once)
(appears only after connected to a headset once)
4 Settings
4-1 Call settings
4-1-1 Emergency key 9 4-1-2 Automatic redial 4-1-3 Calling card
4 2 Phone settings
4-2-1 Clock 4-2-2 Alarm clock 4-2-3 Touch tones 4-2-4 Restore factory settings 4-2-5 Language
4 3 Security settings
4-3-1 Restrict calls 4-3-2 Access codes
4 4 Network services
4-4-1 Call forwarding * 4-4-2 Call waiting * 4-4-3 Send own caller ID with next call * 4-4-4 Network feature setting 4-4-5 NAM selection 4-4-6 NAM update
*
These items will not appear in your phone until they are activated with feature setting” on page48 for details.
Network feature setting
(not available in some systems)
5System
5-1 Automatic 5-2 SemiAuto A 5-3 SemiAuto B 5-4 Home area
(will not appear in some systems) (will not appear in some systems)
6Games
6-1 Memory 6-2 Snake 6-3 Logic 6-4 Dice
7Calculator 8Calendar 9 Keyguard
12
. See “Network

4. The Basics

You have purchased a powerful phone, with lots of features. Read this section for some very basic information on how to use your phone.
A more comprehensive description of your phone is covered in “Your Phone A to Z” starting on page 17.

Switching the phone on and off

Press and hold the key for two seconds to switch the phone on or off.
Switching off with the key
Quickly press the key ( highlighted) then press OK.
TIPS ON EFFICIENT OPERATION: As with any other radio transmitting device, do not touch the antenna unnecessarily when the phone is switched on. Contact with the antenna affects call quality and may cause the phone to operate at a higher po wer level than otherwise needed.
WARNING! Do not switch on the phone when wireless phone use is prohibited or when it may cause interference or danger.
See “Safety At A Glance” on page1 for more information.

Getting a strong signal

Your phone operates on radio waves, and the quality of radio reception depends on the strength of the radio signal in your area. This radio coverage is maintained by a wireless network and the quality of calls on a wireless phone depends on the strength of the wireless radio signal.
If your phone does not detect service at power up, the
Searching for servi ce
message The phone will continue to search for available service for 15 minutes, at which time it will display none is found.
Note: The phone will not work in analog mode while searching for digital service.
Switch off!
will be displayed.
13
will appear,
No service
if
Checking signal strength
When at the start screen ( call, the strength of the radio signal is indicated by the signal indicators on the left side of your phone’s display. These indicators will move up as the strength of the signal increases and down as it decreases.
Increasing your phone’s signal may be easy. Try moving your phone slightly, or move towards a window if you’re calling from inside a building.
see page 10
) or in a

Making a call

Your cellular phone does not have a dial tone. Simply enter the phone number (including area code, as needed) and press
NORMAL POSITION: Hold the phone as you would any other telephone with the antenna pointed up and over your shoulder.
Editing a number on display
If you make a mistake while entering a number to dial,
V
to move the cursor to the left and W to move it
press to the right. Press of the cursor.
Dialing a phone number stored in the phone book
View stored names and numbers by pressing W or V from the start screen (
Clear
to delete the character to the left
see page8)
, then press
Calling card calls
See “Calling card” on page 27.
Emergency calls
See “Emergency calls” on page34.

Ending a call

Press
14

Answering a call

Press any key except or
Note: If Keyguard is on (see next paragraph), only answers calls.
Tip
: You can stop your phone from ringing without answering the call. Press when the phone rings to mute the ringing.
You can still answer the call if
Call
or the name of the
person who is calling is still flashing on your display. If you don't wish to answer the call, it will be forwarded
to your voice mailbox (provided you have a voice mail subscription).

Keyguard

This feature helps to prevent accidental key presses (e.g. when
your
phone is in your pocket, in your
purse) by disabling your keypad. If any keys are pressed while
Keyguard is activated, display.
Activating Keyguard
There are three different ways to activate Keyguard.
locked
will appear on the display when activated.
• Press and hold until (not available during an active call)
•Press
Menu
•Press
Menu
Press Unlock and then *
Keys locked
9 at the start screen
appears
will
Keys
Deactivating Keyguard
There are two different ways to deactivate Keyguard.
•Press
• Press and hold until press
Unlock,
OK
then
15
Unlock keys?
appears, then
Answering a call with Keyguard active
Only the key will answer the call. After you end the call, Keyguard automatically becomes active again.
Some notes about Keyguard
• Calls may be possible to the emergency number programmed into your phone (e.g. 911 or other official emergency number). The number is displayed only after you have keyed in its last digit. Press ) to initiate the call.
• The Emergency key 9 will not work with Keyguard enabled.
• You must deactivate Keyguard prior to turning off your phone.
• Pressing the key quickly turns lights on for 15 seconds.
• Keyguard is automatically turned off when the phone is connected to a c ar kit. Keyguard is automatically re-enabled when removed from a car kit.
Ending a Call
Press
Note: To clear any characters from the display, press again.
16

5. Your Phone A to Z

ABC/abc mode

This allows you to enter upper and lower case alphanumeric characters into your phone. This is necessary for entering names and numbers into your phone book, as well as editing any existing alphanumeric characters.
See “Entering text and numbers” on page36 for more information.

Access codes

This is a security feature th at allows you access to cert ain phone features.
See “Lock code” on page44 and “Security code” on page 62.

Alarm clock

The alarm clock uses your phone’s clock and can be set in advance to sound an alert at a designated time.
You can also turn your phone off after you’ve set the alarm. Your phone will automatically wake up and sound the alarm at the specified time.
The volume for the alarm clock is determined by the current ringing volume.
Silent
Note: If you have selected the will only beep once. The best profile to use while using the alarm
Normal
clock is their original settings or renamed.
For more information on profiles, see page 55. Also, see “Clock” on page30 for information on your phone’s clock.
or
Outdoor
, unless these have been modified from
or
Meeting
profile, your alarm
Setting the alarm clock
1.
2.
Menu
Press
Alarm clock
4-2-2 (
)
Settings
Phone settings
-
Enter time you wish to set alarm (e.g. enter 07:00 to set the alarm to 7:00; remember if your clock is 24-hour or am/pm). Existing digits will be replaced with the new alarm time.
17
-
3.
4.
OK
Press
Note: Step 4 appears only if you have selected am/pm format; see “Selecting time format” on page31 for more information.
Select either am or pm and press
OK
When the alarm goes off
Stop
Press
to shut off the alarm.
Snoozing
Snooze
Press
The alarm will go off again in 10 minutes. If you let the phone alarm for 1 minute without pressing a key, it stops alarming for 10 minutes then starts again.
If you turn off the phone
If you turn off the phone and the alarm is set, the phone switches itself on at alarm time, then the alarm sounds.
To shut off the alarm, press any key except The phone displays
Keep the phone on?
to keep it on or No to switch it off.
Note: If you do not make a selection after 1 minute, the phone will automatically shut itself off.
If you press
Snooze
, the phone turns itself off for 10
minutes, then back on to sound the alarm.
REMEMBER! Do not switch on the phone when wireless phone use is prohibited, or when it may cause interference or danger.
Snooze
Press
Yes
.
Turning the alarm clock off
Menu
Press
clock
), then scroll to
4-2-2 (
Settings
Off
Phone settings
-
and press OK.

All calls timer

This feature keeps track of the approximate time you have spent on all calls with your phone.
See “Call timers” on page 25.
18
Alarm
-

Automatic answer

This is a setting found in your phone’s profile settings, under the
Car
and
Headset
profiles (
see page55
). When this feature is turned on, your phone answers incoming voice calls after one ring.
Note:
and
Car
until you have connected an approved handsfree car kit or a headset to your phone at least once.
profiles will not appear in your phone
Headset
Activating automatic answer
1.
2.
Note: phone has already been connected to a car kit or headset.
3.
4.
Note: This feature will not function with data calls.
Menu
Press
3 (
Profiles
)
Your phone lists each profile. UseýW to highlight
Car
either the
and
Car
Highlight
Automatic answer
Headset
or
Headset
Customize
profile and press
will not appear in the list unless the
and press OK. Scroll to
, then press
Select
again.
Press W to On and press OK.

Automatic redial

This feature attempts to redial numbers that are busy due to the wireless network. It will not redial numbers to a busy party.
Your phone will redial the number you’re trying to call up to 3 times after you hear a quick, bu sy signal. Pr ess to stop the call attempts.
Options
.
Activating automatic redial
Press
redial
Menu
), then press
Settings
4-1-2 (
W
or V to On and press
-
19
Call settings
Automatic
-
OK

Calculator

Your phone’s calculator adds, subtracts, multiplies, and divides.
Remember! Your phone must be switched on to use this feature. Do not switch on the phone when wireless phone use is prohibited or when it may cause interference or danger.
Using the calculator
1.
2.
3.
4.
Repeat these steps as needed. If you need to erase any mistakes, press
5.
Note: You can also choose
Divide
Menu
Press
Calculator
7 (
)
With the screen that contains a “0”, enter the first number in the calculation (press # for decimal point)
To add, press ∗ (+ appears) To subtract, press ∗∗ (- appears) To multiply, press To divide, press
∗∗∗
∗∗∗∗
(* appears)
( / appears)
To insert a decimal, press the # key Enter the second number
Clear
to clear one number at a time.
Options
Press
from the list of options.
. With
Equals
highlighted, press
Add, Subtract, Multiply
, and

Calendar

The calendar helps you keep track of appointments, birthdays or meetings. It can even sound an alarm when it’s time for you to make a call or go to a meeting.
Remember! Your phone must be switched on to use this feature. Do not switch on the phone when wireless phone use is prohibited or when it may cause interference or danger.
Note: Your phone must remain on to use the calendar’s alarm feature. If your phone is off, the alarm will not sound at its scheduled time.
OK
20
Using the calendar
1.
2.
Tip:
When you enter a digit, it writes over the number to the right of the cursor.
3.
4.
Menu
Press
Calendar
8 (
)
If you are not in a digital network, you will be prompted to set your phone’s time and date
When your phone prompts you for the time with
hh:mm
, enter the time in hours and minutes
(using two-digit fields), then press
Time format (24-hour or am/pm) is set using the Clock. See “Clock” on page30.
OK
When your phone prompts you for the date with
mm/dd/yyyy
, enter the month and day (using two­digit fields) and year (using a four-digit field), then press OK.
W
to move the cursor right and V to move it left.
Use
Your phone now displays the current day. You can
W
also scroll to different days by pressing Once you’re at the date you want, press
Then use press
to highlight the option you want, and
Select.
The options are:
or V.
Options
.
Option 1: View day
With this option, you can view the notes of the day currently on display.
W
Use
to scroll through the notes. Each note allows you
to choose the following
Erase
clears the note from your calendar.
Edit
gives you the same prompts you got when you made
the note.
Move
gives you the date prompt so you can move the
note to another date.
Options
:
21
Option 2: Make note
With this option, you’ll need to choose
Meeting
, or
Birthday
. Your phone will prompt you for more information depending on which one you choose. You can also set an alarm for any calendar note.
See “Entering text and numbers” on page 36 for help with entering information at the
Note: When the alarm goes off, you can press Press
to shut off the alarm.
OK
Subject:
prompt.
Reminder, Call
or OK.
Postpone
Option 3: Erase notes
With this option, you’ll need to choose which notes to erase. If you choose all the notes for the day currently on display (
Of chosen day
One by one
), or
(for all notes in
the calendar), your phone presents each note to you with
Erase
the option
If you choos e
Back
or
All at once
.
, your phone will delete all
calendar notes. When prompted to confirm the erase,
Yes
press
or No.
Option 4: View all
This allows you to view the notes of the entire calendar.
W
or V to scroll through the notes.
Use
memory empty
will appear if there are no notes in the
Calendar
calendar.
Option 5: Go to date
Enter the date you wish to go to.
,
Option 6: Set the date
Enter the day and month (using two-digit fields) and year (using a four-digit field), then press OK.

Call forwarding

This network service is used to forward incoming calls to another number so you won’t miss an important call. Check with your service provider for details.
22
Note: Before you ca n activate this feature, you sh ould first store the feature code given to you by your service provider. Otherwise, this feature may not appear in the menu or function properly.
However , y ou can use the feature code manually, if you choose, by including the feature code in front of the phone number to which you wish to forward your calls (e.g. *72 555 1212).
See “Network feature setting” on page48 for more details. Note: If the code you store is not correct, the Call fowarding
feature will not work.
1.
2.
3.
4.
5.
6.
Menu
Press
Call forwarding
4-4-1 (
)
Settings
Network services
-
Scroll to desired call forwarding feature
see options below
(
Select
Press Highlight Enter phone number at
locate number in phone book) and press
)
Activate
and press
Number:
OK
(or press
Search
OK
Your phone will attempt to call the network to
-
to
confirm the feature code you entered in Menu 4-4-4
see “Network feature setting” on page48
(
7.
Once the feature code had been confirmed, the
)
feature is activated
Call forwarding op tio n s
Forward all calls Forward if busy
forwards all incoming calls.
forwards calls only when you’re on the
phone.
Forward if not answered
forwards calls if you don’t
answer.
Forward if out of reach
forwards calls if you are out of
the serving wireless networ k.
Cancel all call forw arding
cancels all call forwarding
options you have made active.
23

Call log

This feature automatically keeps track of numbers you’ve dialed, numbers that have called you, and the amount of time you’ve spent on calls.
Using call log
1.
2.
Tip:
Call log options
When you access
calls Call time
connected (if clock has been set)
Use number
call log, save it in your phone book, or dial the number by pressing .
Save Erase
Menu
Press Press
press
Missed calls
2-1
Received calls
2-2
Dialed calls
2-3
Clear call lists
2-4
Call timers
2-5
Call log
2 (
W
to reach one of the following options, then
Select
or
OK
See page46
-
-
See page34
-
-
See page25
-
)
See page56
See page29
.
.
.
.
.
You can dial any of the phone numbers by pressing
while the number is on the display.
and press
Dialed calls, Received calls
Options
, a list of options will appear.
, or
shows the date and time when the call was first
allows you to v iew the nu mber sto red in th e
allows you to save the number into yo ur phone bo ok.
will erase the number from the call list.
Missed

Call restrictions

This feature allows you to restrict incoming and outgoing calls to and from certain numbers.
See “Restrict calls” on page57 for details.
24

Call settings

This feature allows you to access and activate some of your phone’s features.
Using call settings
1.
2.
Menu
Press
W
Press
to reach one of the following options, then
Select
press
Emergency key 9
4-1-1
Automatic redial
4-1-2
Calling card
4-1-3
4-1 (
Settings
See page27
-
Call settings
-
See page35
-
See page19
­.
)
.
.

Call timers

Your phone automatically keeps track of the approximate amount of time you’ve spent in calls.
1.
2.
Call durations are for the currently-selected NAM (phone number). Your phone has separate timers for each NAM your phone uses.
Note: The actual time invoiced for calls by your service provider may vary, depending upon items such as network features, rounding off for billing, and taxes.
See “NAM selection” on page47 for details on NAM.
Menu
Press
Call timers
2-5 (
)
Call log
-
Scroll repeatedly to access the following options
Last call
displays call duration of last call.
Current call timer
Note: while using the
All calls
displays call duration of all calls made since
timers have last been reset (
how to clear call timers
Life timer
shows duration of all calls; this can not
be reset (see
Clear timers
see page30
timer (
can be accessed by pressing
Last call
timer. See page32 for details.
see page30 for details on
).
page43
).
clears all call timers except the Life
).
Details
25

Call waiting

If you have subscribed to call waiting, your phone will beep during a call to let you know you have an incoming call. Your phone may also display the incoming caller’s identification
See “Call forwarding” on page22 for details on caller ID.
Answering an incoming call with call waiting
Press
Swapping between two calls
Press
Ending the calls
Press to end both calls
Activating call waiting
You can also activate this feature with your phone; simply ask your service provider for the feature code, store it into your phone, then activate it.
Note: This feature may not appear in your phone’s menu or function properly until the feature code has been stored.
See “Network feature setting” on page48 for more details.
1.
2.
3.
4.
5.
Menu
Press
Call waiting
Press W to
OK
Press
4-4-2 (
)
Activate
Settings
(or select
Network services
-
Cancel
to cancel)
Your phone will attempt to call the network to confirm the feature code you entered in Menu 4-4-4
see “Network feature setting” on page48
(
)
Once the feature code has been confirmed, the feature is activated.
-

Caller ID

This is a network service that helps identify incoming calls. Contact your service provider for details.
26
When Caller ID is active,
your
phone may display the caller’s phone number. The caller’s name may also display if their name and number has been stored in the phone book or if the wireless network supports it.
Call
Call-caller ID unav a ilable
or
will display when the
wireless network doesn’t recognize the calling number
Call-caller ID blocked
Also,
may display if the calling
party has blocked caller ID.
Note: If you have stored a number more than once in your phone book, and that number is stored each time with a different name, then a name will not appear when someone calls from that number.
See “Phone book” on page51 for details on your phone book.

Calling card

If you wish to use a calling card for long distance calls, you must first store your calling card information into your phone. Your phone can store up to four calling cards.
Storing a calling card
1.
Menu
Press
card
)
2.
Press W or V to desired calling card, press
3.
Press W or V to
4.
Enter security code and press
See “Security code” on page62 for details on your phone’s security code.
5.
Press
Select
the following chart to determine the dialing sequence required by your long distance provider. Then press sequence for your card.
Select
Press
4-1-3 (
Edit
Settings
, press
Call settings
-
OK
OK
Dialing sequence
at the
W
or V to select the appropriate
to confirm your choice.
-
Options
prompt. Use
Calling
.
27
If you use a
calling card from:
MCI, AT&T True Choice, Sprint Canada, Unitel
networkMCI, WorldPhone MCI
GTE, PacBell, AT&T, Stentor
*These calling cards are frequently used with these dialing sequences. However, they may vary and are subject to change at the phone company’s discretion.
Note: The order of the steps to follow may vary, depending on which dialing sequence your card uses.
6.
Enter access number when prompted for the calling
You typically are required to:
*
Dial 1-800 access number , t hen phone number, then card num­ber (+ PIN if required)
Dial 1-800 access number , t hen card number ( + PIN if re quired ), then phone number
Dial the prefix (any numbers that must precede the phone number) and phone number you want to dial, then card number, (then PIN, if required)
Select this
dialing
sequence:
Access no. + phone no. + card no.
Access no. + card no. + phone no.
Prefix + phone no. + card no.
card’s access number (usually the 1-800 number listed on the back of the calling card), press
Note: You can also retrieve the access number from your phone book if it has already been stored. Simply press
V to find the number.
7.
Enter card number and/or PIN when prompted to
Search
, then W or
enter calling card number and personal identification number, then press
changes
?
8.
Press W or V to display
OK.
Press OK again at
Card name
Save
and press Enter card name using your phone’s keypad, then press OK.
See “Entering text and numbers” on page36 if you need help on entering the card name
OK
Select
.
Choosing a calling card to use
1.
Menu
Press
card
)
2.
Press W or V to desired card, press
4-1-3 (
Settings
28
-
Call settings
Options
Calling
-
3.
Press W or V to highlight
4.
Enter security code at
5.
Your phone will display
Select
and press
Security code:
, press
Card ready for use
Making calling card calls
Enter the phone number, including any prefix (such as 0 or 1) that your calling card may require when you make a calling card call. See your calling card for instructions.
Press and hold for a few seconds until your phone
Card call
displays When you see
the tone, then press OK. When you see
press OK again
Note: This procedure may not apply to all calling card options pro­grammed into your phone. Please look at the back of your calling card or contact your long distance company for more information.
.
Wait for tone, then press OK
, listen for
Wait fo r tone,
, listen for the tone, then press OK.
Change lock code
This feature allows you to change your lock code.
See “Changing your lock code” on page44.
Change security code
This feature allows you to change your security code.
See “Changing your security code” on page62.
OK
OK

Clear call lists

This feature will clear all dialed numbers, as well as numbers of answered calls and missed calls. You can not undo this operation, so be careful.
Also, see “Call log” on page24.
1.
2.
Menu
Press Highlight either
and press OK (
2-4 (
Call log
Clear call lists
-
All, Missed, Received,
All
will clear all call lists, while the
others clear their respective call lists)
29
or
)
Dialed

Clear time rs

This feature clears all call timers (except f or the life timer ) for the currently-selected NAM.
See “Call timers” on page 25 for mo re details.
1.
2.
Careful
call timer s to lo g o r t rack the amount of t i me yo u are using your phone, you may wish to record the call timers before you erase them.
Note: The life timer can not be reset. See “Life timer” on page43 for details.
Menu
Press
timers
)
Enter security code at
: Clearing call timers ca n not be undo ne. If you ar e using th e
2-5-4 (
Call log
Call timers
-
Security code:
-
and press

Clock

You can program your phone’s clock two different ways: you can either use the time and date information that’s provided by the wireless system, or you can set it yourself with your own time.
You can also choose to hide the clock if you prefer.
Note: Your phone also features an alarm clock. See page17 for details.
By default, the date and time is automatically set to your phone by your wireless system. If you wish to override the system clock, do the following:
Clear
OK
Setting your own time
1.
Menu
Press
2.
Press W to
3.
Press Wýto
4.
Enter the current time, then press OK (time will appear in
5.
Enter the current date, then press OK (date will appear in
Settings
4-2-1 (
Time settings
Set clock
hh:mm
)
mm/dd/yyyy
, press
)
30
Phone settings
-
Select
, press
Select
again
-
Clock
)
Selecting time format
If you choos e indicator that appears to the right of the displayed time. If the indicator is at the top, it’s in am; if on the bottom, it’s in pm.
1.
Press
2.
Press W to
3.
Press W to either
4.
Press
If the time is not automatically available because you are outside of the digital network, or you wish to revert back to the wireless system’s time, do the following:
am/pm
Menu
OK
format, you will notice a small
Settings
4-2-1 (
Time format
24-hour
Phone settings
-
and press
am/pm
or
Select
-
Clock
Setting the network clock
1.
Menu
Press
2.
Press W to
3.
Observe the text: again
If you choos e
Time is set
Note: If you use the Set by network option while outside your digital network, you will be prompted to enter your own time (see above). Network time will replace the time you set once you re-enter your digital network.
Note: If your battery has been removed or has drained outside the digital network, you will be prompted to enter your own time only if the battery is replaced or recharged while still outside of the digital network (see above).
.
Settings
4-2-1 (
Time settings
Set by network
Set by network
Phone settings
-
Select
, press
, press
-
Select
Clock
, your phone will display
)
)
Displaying or hiding the clock
1.
Menu
Press
2.
Press W to either one will display depending on the current setting)
3.
Press
Select
4-2-1 (
Settings
Hide clock
31
Phone settings
-
Display clock
or
Clock
­ (only
)

Conference call

This feature allows you to add a third party to a call.
Note: This feature may not be available in all wireless systems. See your service provider for details and availability.
Making a conference call
1.
While in a call, enter the second phone number and press
Note: You can also make a third party call using the in-call menu. While in a call, press Options and scroll to New call. Enter the number you wish to call and then press
2.
Once the third party answers, press to connect
OK
all three parties
3.
Press again if you wish to disconnect the third party. Press to drop both parties.
Recalling a number from the phone book during a conference call
1.
During the call, press
2.
Press W or V to
3.
4.
Select
Press Enter name and press OK, or just press W or V to
scroll through the phone book
5.
Press
at
Names
Search
Options
and press
OK
Current call timer
This feature displays the running elapsed time on your screen while a call is active. Once the call has ended, simply press any key to clear the display (the display will also clear automatically aft er 10 seconds).
Also, see “Call timers” on page25.
.
Activating the current call timer
Menu
Press

Current call timer

With
On
, and press
2-5 (
OK
Call log
Call timers
-
displayed, press
32
) and press
Select
Details
, scroll to
.
Note: As with all call timers, the actual time invoiced for calls by your service provider may vary, depending upon items such as network features, rounding off for billing, and taxes.
Customize profiles
This feature allows you to customize individual profiles.
See “Profiles” on page55 for details.

Custom Tone

This feature allows you to assign special ringing tones to phone numbers already stored in your phone book. So when your phone rings, you’ll be able to quickly identify who’s calling.
Your phone will also display an icon to identify that this person is in the custom tones list. You can assign as many as 20 names and numbers to the list.
Keep in mind that caller ID must be available and active in your phone in order to use this feature.
and then
Silent
profile, your phone will not
Options
, then press
Select
Note: If you have selected the ring when someone in your custom tone list calls.

Assigning a custom ringing tone to a name and number

1.
In your phone book, locate the person you wish to add to the custom tone list.
2.
With that person’s name or number highlighted,
Details
press
3.
4.
Custom tone
Scroll to Scroll through the list of ringing tones that are
displayed, then press OK to make your choice

Removing a name and number from the list

1.
In your phone book, locate the person you wish to remove from the custom tones list
2.
With that person’s name or number highlighted, press
Details
and then
Options
33
3.
4.
Scroll to Scroll to
Custom tone Default
and press
, then press
OK
Select

Data and fax calls

Your phone can function as a fax/modem when connected to your PC or laptop computer via the optional data cable. You must also have the appropriate fax or data software installed and configured to send and receive data or faxes.
more information).
(See "Data and Fax Calls" on page 77 for

Dialed calls

Your phone automatically stores the last 10 numbers you’ve dialed.
1.
2.
3.
Menu
Press
Dialed calls
Press W or
2-3 ( )
V
Call log
-
Press to dial the number you wish to call
You can also access the last 10 dialed numbers if you press
once, then press
Also, see “Call log” on page24 for details on other call lists.
W
or V to scroll through the list.
Dialed calls option s
See “Call log options” on page24.

Earpiece volume

You can adjust the listening volume of your phone’s earpiece by pressing volume.
See “Volume” on page74 for details.
W
or Výto decrease or increase the

Emergency calls

1.
If the phone is not on, switch it on
2.
Key in the emergency number for your present loca­tion (e.g. 911 or other official emergency number). Emergency numbers vary by location.
34
3.
Press
IMPORTANT!
This phone, like any cellular phone, operates using radio signals, cellular and landline networks, as well as user-programmed functions which can not guarantee connection in all conditions. Therefore, you should never rely solely upon any cellular phone for essential communications (e.g., medical emergencies).
Remember, to make or receive any calls, the phone must be switched on and in a service area with adequate cellular signal strength.
Emergency calls may not be possible on all cellular phone networks or when certain network services and/or phone features are in use. Check with local cellular service providers.
If certain features are in use (keyguard, restrict calls, etc.), you may first need to turn those features off before you can make an emergency call. Consult this document and your local cellular service provider.
When making an emergency call, remember to give all the neces­sary information as accurately as possible. Remember that your cellular phone may be the only means of communication at the scene of an accident - do not cut off the call until given permission to do so.

Emergency key 9

With this feature on, the phone attempts to make an emergency call wh en you pr ess 9, th en . The phone dials the emergency number pre-programmed into your phone.
Note: You can also dial an emergency call by pressing and holding 9 until the phone indicates it is attempting to make an emergency call. However , this meth od does not work when K eyguar d is active or when the phone is connected to a modem.
Note: This feature is disabled while playing games, using the calculator, or whi l e e di t i ng (e. g . phone book entri e s, calendar, etc.).
Activating Emergency key 9
Menu
Press
key 9
), scroll to On to activate or
press OK.
4-1-1 (
Settings
Call settings
-
35
-
Off
to cancel, then
Emergency
IMPORTANT!
Official emergency numbers vary by location (e.g. 911). Only one emergency number is programmed into your phone to be dialed automatically by Emergency key 9, which may not be the proper number in all circumstances.

Entering text and numbers

You can enter text and/or numbers when storing information into your phone via your phone’s keypad. When you see the letter you wish to enter, simply press the key associated with that letter until it appears on the display (numbers also appear).
ABC mode
When you need to enter letters into your phone, it will automatically switch over to mode.
Your phone displays the icon to indicate that your phone is in ABC mode. It also displays when you are viewing names rather than numbers.
When is displayed, you can enter these characters:
Key Characters Key Characters
.,’?!-1 PQRS7
ABC2 TUV8 DEF3 WXYZ9 GHI4 Enters an empty space, 0 JKL5 MNO6 Changes letter case;
(See below for details)
long press toggles between ABC/abc and 123 mode
While you’re editing a name, the
W
cursor to the left, and
Clear
Press
to correct any mistakes.
will move it to the right.
36
V
key will move the
If you wish to enter an empty s pace be twee n charac ters, press 0 for each space.
abc mode (Changing letter case)
Press the # key to switch between upper and lower case letters. The icon will switch to to indicate you are using lower case .
123 mode
When storing names to the phone book, you can enter a number within a name at any time. Simply press that particular number key a few times until it appears, or press and hold the key for the same result.
However, you can do this more quickly by accessing the
mode, without having to scroll through each letter
to access the number you wish to enter. Simply press the # key for about 2 seconds while in
mode and the icon will appear . While in this mode, only numbers can be entered. Letters can not be entered unless your phone is in mode.
Press the # key aga in for a coup le of seco nds i f y ou wish to deactivate the mode.
Special characters (for storing names)
When in mode (
key and a collection of special characters will appear. You can use these characters to help when storing names in your phone book. Simply press to highlight the one you wish to use and press
. , ? ! : ; - + # * ( ) ‘ “ _ @ & $ £ % / < > ¿ ¡ § = [ ] ¥
TIP
: If you wish to access a spe cial character that appea rs
toward the end of this list, press Also, you can a ccess the . , ‘ ? ! - characters quickly by
pressing the key while in mode.
see page17
), you can press the
W
Insert
V
for quicker access.
or V
.
37
Special Characters (for storing and calling numbers)
The following special characters are helpful when you store numbers to your phone book ( press the key once or repeatedly, and the following characters can be stored within the number sequence.
(p) creates a pause when a number is dialed; the digits located to the right of the “p” are automati­cally sent as touch tones after a 2.5 second pause
see page70
(
w
( The “
Send
right of the “w” as touch tones (
You can add as many special characters as you need in a single number sequence. These characte rs can not be entered while in mode.
).
) creates a “wait” when a number is dialed.
w
” makes your phone wait for you to press
or , then it sends the digits located to the
see page51
see page70
). Simply
).
Erase all (text messages)
You can erase all read text messages quickly and easily from the text messages menu (Menu 01-1).
See “Erasing all text messages” on page69 for complete details.
Erase option s for your phone book
See “Erasing stored names and numbers” and “Erasing your entire phone book” on page53.

Fax calls

Your phone can function as a fax/modem when connected to your PC or laptop computer via the optional data cable. You must also have the appropriate fax software installed and configured to send and receive data or faxes.
information.
See “Data and Fax Calls” on page77 for more
38

Games

You have four exciting games to choose from in your phone.
Menu
Press
REMEMBER! Your phone must be switched on to use this function. Do not switch on the phone when wireless phone use is prohibited or when it may cause interference or danger.
Memory
Reveal pictures to find pairs in as few tries as possible. Move the cursor with the 2 (up), 4 (left), 6 (right), and 8 (down) keys.
Press the 5 key to reveal pictures. Press the # key to jump right over revealed pictures or move from bottom right to top left. Press the ∗ key to jump left o ver revealed pictures or move from top left to bottom right. Once found, pairs stay visible.
Snake
Feed the snake with as many goodies as possible and watch it grow. Use keys 2 (up), 4 (left), 6 (right), and 8 (down) to turn the snake toward food. The snake can only turn 90 degrees at a time.
The longer the snake’s tail grows, the higher the score. Using a higher level of difficulty increases the snake’s speed but also increases the point value for each goodie. If the snake hits its own tail or the surrounding wall, the game is over.
You can also try using keys 1 (up and left), 3 (up and right), 7 (down and left), and 9 (down and right) to control the snake’s direction.
Logic
Find a secret combination of figures. Available figures are shown at the top of the display before you accept the first guess row . Use th e 2, 4 and 8 keys to move the cur sor and the 5 key to select the figure.
To copy a figure from a previously accepted guess row, start scrolling with the 4 key, move the cursor to the desired figure in the normal way and accept the selection with the 5 key.
6 to choose one of the following games:
39
Once you think you have the right combination, press the
*
key. The result is presented as a set of marks over the row. A correct figure in the right place gives a full mark; a correct figure in the wrong place gives a half mark.
The game ends when all the figures are correct and in the right place.
Dice
Use this to play other games that require a set of dice if one isn’t available. Use the number of dice, up to six. You can roll, lock, and unlock each die as many times as you wish.
When you start a new game, the dice roll for a couple of seconds and then stop. Use the 4 (left) and 6 (right) keys to select a die. Press the 5 key to lock or unlock the selected die.
Press ∗ to roll the unlocked dice again.
Level
option to set the
Game options
When you select a game, you can choose from the following submenus:
Level
allows you to choose the level of difficulty, except for Dice, which selects the number of dice you wish to play with.
New game Top score
ever played with your phone (
Instructions Last view
ends
Continue
interrupted (e.g. an incoming call).
starts a new game.
will display the selected game’s highest score
does not appear in Logic or Dice
will describe how the game is played.
may appear in the options list when the game
.
may appear in the options list if the game is
).

Inbox

When you receive a text message, it’s stored in the Inbox. Your phone will display text message icon, and you will hear a tone (
the message alert tone; see page 45
read messages.
Please see “Text messages and paging” on page67 for more details on this feature.
Message received
). Press the
40
, along with the
depending on
Read
softkey to

In-call menu

While you’re in a call, you may notice that
appears on your display. Pressing this key will access you
to the in-call menu, which allows you access to certain
features while you have a call active.
When you access the in-call menu, you may notice the
following choices:
Mute
Allows you to mute the microphone; if your
microphone is already muted,
(see “Microphone” on page46)
mute
Touch tones
Allows you to manually enter a touch tone
Mute
string or search for one in your phone book
book” on page51)
Menu
Allows you access to your phone’s menu
Names
Allows you access to your phone book
book” on page51)
New call
Allows you to place the call to the third party
when making a conference call
page 32)
(see "Conference call" on
Options
will change to
(see “Phone
(see “Phone
Keyguard
This feature disables the keypad to protect against
accidental keypresse s.
See “Keyguard” on page15 for more details.

Keypad tones

This is one of the settings in your phone’s profiles
see page 55
(
you press your phone’s keys.
Note that if you choose the
will be turned off.
). It sets the volume of the tone you hear when
Silent
profile, keypad tones
End
Setting the keypad tones
1.
2.
Menu
Press
3 (
Profiles
)
Your phone lists each profile. UseýW to highlight the profile you want and press
Options
.
41
3.
Highlight
Keypad tones
4.
Press W to scroll through the options; your phone plays a sample of each. Press OK for the one you want.
Customize
and press
and press OK. Press W to
Select

Language

Because many wireless phone customers speak English as a second language, your phone allows you to choose your phone’s displayed language.
Choosing a language for your phone
1.
2.
You can choose from Eng lish, French, Spanish, Por tuguese, Hebrew, Chinese (simplified), or Chinese (traditional).
Menu
Press
Language
Use W or V to select the language you wish to use and press
)
OK
4-2-5 (
Settings
Phone settings
-
Last call timer
This feature displays the duration of your last call.
See “Call timers” on page 25.

Last number redial

When you want to call your last dialed number,
Press , then again
Note: You must be at the start screen before you press
-
Letter case
You can change from upper to lower case when entering letters into your phone.
See “abc mode (Changing letter case)” on page37 for more details.
42

Life timer

The life timer displays the approximate total time of all
calls dialed and received with your phone (in hours and
minutes only). The life timer can not be reset and is used
in conjunction with your phone’s warranty.
Press
Menu
2-5-3 (
Call log
Call timers
-
Life timer
-
view your phone’s life timer.
Note: The actual time invoiced for calls by your service provider
may vary, depending upon items such as network features,
rounding off for billing, and taxes.
Also, see “Call timers” on page25.

Lights

This is one of the settings in your phone’s
see page 55
(
). This feature determines whether the lights are on only when you use your phone, or if they are on at all times. This setting works only when your phone is connected to a car kit.
1.
2.
Note: connected to a car kit at least one time.
3.
4.
If you select
Menu
Press
3 (
Profiles
)
Your phone lists each profile. UseýW to highlight the profile you want and press
will not appear in the list until the phone has been
Car
Highlight highlight
Customize
Lights
and press
Options
and press OK. Press W to
Select
Use W to scroll through your choices and press
Automatic
, your phone’s lights are turned off within fifteen seconds if no keys are pressed. If On is selected, then the lights will remain on the entire time your phone is connected to the car kit.
Car
profile
.
.
) to
OK

Listen to voice messages

This feature allows you to access your voice messages.
See “Voice messages” on page73 for complete details.
43

Lock code

You’ll need the lock code to activate and deactivate Phone Lock (
see page53
), or to change your lock code.
The default lock code is 1234. If you enter an incorrect
your
lock code five times in a row, for the security code (
see page62
phone will prompt you
).

Changing your lock code

In a lock code, only numeric characters are accepted.
1.
2.
3.
4.
Note: When you change your lock code, make sure you store it in a safe place, away from your phone. Avoid entering access codes similar to emergency numbers to prevent accidental emergency calls.
Menu
Enter
4-3-2-3 (
Access codes
Enter lock code at
Settings
Change lock code
-
Enter lock code:
Enter new lock code, press Verify new lock code, press
Security setting s
­)
and press
OK
OK

Manual touch tones

This setting determines how long touch tones are produced as you press the keys on the keypad. Note that touch tones are sometimes called DTMF tones.
See “Touch tone length” on page70 for details.
Setting manual touch tones
Menu
Press
tones
4-2-3-1 (
Manual touch tones
-
following options, then press
Continuous
you press and hold the key.
Fixed
sets the tone length to .1 second, regardless
of how long you press the key.
Off
turns the tones off, and no tones will be sent
when you press the keys.
Settings
Phone settings
-
) and highlight one of the
OK.
means the tone sounds for as long as
-
-
OK
Touch
44

Memory status

This feature allows you to see how many free and in-use memory locations are in your directory.
Also, see “Phone book” on page51.
Names
Press scroll to
, scroll to
Memory statu s
Options
and press
and press
Select
Select
again.

Messages

This feature allows you to access your voice and text messages, as well as composing your own welcome note.
Using messages
1.
2.
Menu
Press
W
Press
Select
press
Text messages
01-1
Voice messages
01-2
Welcome note
01-3
Messages
01 (
)
to reach one of the following options, then
See page67
-
-
See page76
-
.
See page73
.
.

Message alert tone

This is one of the settings in your phone’s profiles
see page55
( you get a text message.
Also, see “Text messages and paging” on page67.
1.
2.
3.
4.
). It sets the tone that your phone makes when
Menu
Press
3 (
Profiles
)
Your phone lists each profile. UseýW to highlight the profile you want and press
Highlight highlight
Customize
Message alert tone
Options
.
and press OK. Press W to
, then press
Select
Use W to scroll through your choices (your phone plays samples) and press OK.
. Then
.
45

Microphone

You can mute and unmute your phone’s microphone while a call is in progress. During a call, your phone’s softkeys change from
Mute
.
Names
and
Menu
to
Options
Muting and unmuting your phone
You can mute the phone’s microphone during a call;
.
End mute
or
Mute
. To unmute the microphone, press
Options
and press
Select
.
, scroll to
simply press
Unmute
If these texts are n ot available, press
Mute
Muting and unmuting also affect the microphones of any accessories connected to the phone.

Missed calls

If Caller ID is available, your phone will keep track of the last 10 calls you have missed if you weren’t around to answer the call. You can even find out what time they called.
Missed calls will appear in your phone only if it was turned on and in a se rvic e area when t he cal l was m issed.
If the display says ‘Missed call’
List
Press
. To call back the displayed number, press .
Exit
Press
to go back to the start screen.
and
Missed call options
See “Call log options” on page24.
Checking the missed calls list anytime
Menu
Press through the list.
When the Forwarding feature ( will not
Also, see “Call log” on page24 for details on other call lists.
Forward if not answered
treat the forwarded calls as missed calls.
2-1 (
Call log
see page22
46
Missed calls
-
) is selected, your phone
), then scroll
option in the Call

NAM selection

The Number Assignment Module (NAM) is the phone’s storage location containing the assigned phone number(s) and other system information. This information is entered by your service provider when programming your phone when your phone is first activated.
In most systems, your phon e can be activated in up to 2 different service areas (e.g. one in Dallas and another in Chicago), each giving your phone a different phone number or account.
Only one number can be active at a time. When you select a phone number, you’re also selecting which system you’re using as your home system (
page65
). The first phone number displayed with this menu
is the currently selected number.
Note: It may not be necessary to have two NAMs for your phone if your service provider has service or roaming agreements for each area in which you wish to use your phone. Contact your service provider for details.
Selecting the NAM for your phone
1.
2.
Note: You need at least one active number to make calls. You can not change from one NAM to another during a call.
Menu
Press
NAM selection
4-4-5 (
),
Settings
Use W or V to select the phone number you want to use and press OK.
see “System Selection” on
Network services
-
-

NAM update

The Number Assignment Module (NAM) update feature may appear in your phone. It allows you to easily activate or reactivate your phone without having to go to your service provider.
In some cases, when you try to connect to your service provider, the following message may appear on the display before the call is initiated.
47
'Lock' prevents the service provider from chang­ing the lock code. 'Unlock' allows the provider to change the code and restrict others from activating the phone.
If this happens, sel ect th e appr o pria t e select io n fo r your phone. If you don’t want your service provider to change your lock code, select
Lock
. If you want to allow your service provider to change your code to prevent other service providers from activating your phone, press
If you wish to do neither and want to return to the start screen, press and hol d .
Note: This feature may not be available in all systems. Please contact your service provider for details about the availability of this feature.

Network feature setting

Call forwarding ( own caller ID with next call (
page22
), Call waiting (
page63
available through your service provider or dealer. When you subscribe to any of these services, your service
provider or dealer gives you a separate feature code to activate each service. Deactivation codes are used to deactivate each service.
Once you store the appropriate code in your phone, the service appears as a menu item. You can then use the menu to activate and deactivate these services.
Note: These feature codes may already be stored in your phone by your service provider. Check with your service provider to confirm if these codes are already configured in your phone.
Note: If your phone has more than one phone number programmed, any feature codes stored will apply only to your primary phone number, or NAM 1.
page26
) and Send
) are network services
Unlock
.
Storing feature codes
1.
Menu
Press
4-4-4 (
Network fe ature setting
Settings
)
48
Network services
-
-
2.
Feature code:
At
, enter the feature code or deacti-
vation code received from your dealer (e.g. ∗74,
740, etc.), press
3.
W
to the service that the code applies to and press
OK
Select
4.
W
to suboption, then
Select
(Repeat step as
required, based on number of suboptions)
(Use step four only for call forwarding options)
5.
W
to
Activate
or
Cancel
, then press
OK

Network services

Some of the features in this menu are network services that require a subscription. See your service provider for details and availability.
Call forwarding *
4-4-1
Call waiting *
4-4-2
Send own caller ID with next call *
4-4-3
Network feature setting
4-4-4
NAM selection
4-4-5
NAM update
4-4-6
These features will not appear in the menu unless they are acti-
*
vated using setting” on page48 for details.
Network fe a ture setting
-
See page26
-
See page46
-
See page47.
-
See page22.
.
See page48
­.
. See “Network feature
See page 63
-

One-touch dialing

This feature allows you to make phone calls quickly and easily with the touch of a button.
You must store names and numbers in your phone book (see page52) before you can use this feature. Then you can assign a name from the phone book to a one-touch dial location using your phone’s keys 2 through 8.
Note: Keys 1 and 9 are used exclusively for dialing your voice mailbox (see page73) and for attempting emergency calls (see page88) to the emergency number programmed into your phone (e.g. 911 or other official emergency number). Press and hold either of these keys to initiate the appropriate call.
.
.
49
Assigning one-touch dial loc a ti on s
1.
2.
3.
4.
Press
Names,
scroll to
1-touch dialin g
Select
Scroll to next available empty location, appear, then press
Assign
Scroll to select desired name and press Repeat as necessary
and press
(empty)
Select
will
Calling a number using one-touch dialing
Press and hold the key (2 through 8) for a few seconds to call the number in the corresponding one-touch dial location. You can also press the key and then if you prefer.
Your phone recalls the phone number from the memory, displays it briefly, then dials it.
Changing numbers in one-touch dial list
With this feature, you can assign a different number to any one-touch dial location.
1.
2.
3.
4.
Press
Names,
scroll to
1-touch dialin g
and press
Select
Scroll to the location you wish to change and press
Options
Scroll to
Change
, then press
Select
Scroll through phone book to select new number and press
Select
Erasing one-touch dial locations
1.
2.
3.
Press
Names,
scroll to
1-touch dialin g
Select
Scroll to the location you wish to erase and press
Options
Scroll to
Erase
, press
Select
, then press OK at
Erase?
50
and press

Paging

You can receive pages with your phone.
See “Text messages and paging” on page67.

Phone book

You can store up to 200 numbers and associated names in your phone’s memory. These numbers are right at your fingertips for easy dialing.
Things to know about the phone book:
Stored numbers may be up to 32 digits long. Stored names may be up to 16 characters long. You can not store identical names into your phone
(e.g., John, John); make sure you use unique names in your phone book (e.g., John H., John W.). If you try to use a name that already exists, displayed, followed by the currently stored name. Press OK to replace the existing entry or return to the previous screen.

Accessing the phone boo k

Names
Press
, scroll to desired submenu and press
About the submenus
The phone book has several submenus from which you can choose.
Search
allows you to search for a specific name.
Add new
allows you to enter new names and numbers.
Options
lets you choose your scrolling view, as well as to
show memory status.
1-touch dialin g
touch dial locations (
allows you to assign up to seven one-
see page49 for details)
Replace?
Back
.
will be
to
Select
.
51
Erase all
lets you erase every name and number in your phone book. You can erase one name and number at a time by pressing
Details
, then
Options
when viewing a
name already in the phone book.
Own Number
displays your own phone number.

Storing a name and number

1.
2.
3.
4.
Also, see “Entering text and numbers” on page36 and “Quick save” on page64.
Names
Press
Add new
Scroll to
and press
Select
Enter name using the keypad (use # to switch between upper and lower case) and press
OK
You can also press the key to insert any special characters
Enter phone number and press
(see page37 for a list of special characters)
OK

Changing a number stored with a name

1.
Recall stored name, then press number
2.
3.
Options
Press
, scroll to
Press OK while name is displayed, unless you wish to change it. If so, press and hold and press
4.
Press and hold and
5.
Enter new number
6.
Press OK to save new number
OK
V
keys to edit
Clear
to erase number or use the W
Edit
and press
Details
Select
Clear
, re-enter name
to view

Recalling names and numbers

At the start screen, p ress W or V to view names in directory. Then scroll to the person you wish to call and press to dial the number (phone will display number dialed to confirm).
52

Recalling numbers by name

at
Names
(or just press W or V).
Search
. Enter the name of the
Names
W or V until
At the start screen, press Then press the number on the keypad with t he corresponding first letter of the name you wish to call. Keep pressing to get to the next letter on that key.
You c an also r ecal l numb ers by na me by pr essi ng then press
Select
person you wish to recall and press OK.
Note: If you only entered the first letter of the name and there are several names beginning with the same letter, press the desired name appears.

Erasing stored names and numbers

1.
Recall stored name
2.
3.
Note: You can not undo Erase functions, so be careful!
Details
Press Highlight
, then press
Erase
, then press
Options
Select
, then
OK

Erasing your entire phone book

1.
2.
3.
4.
5.
Warning: This feature will erase your entire phone book, which can not be undone!
Names
Press
Erase all
Scroll to Press OK at
and press
Are you sure?
Enter security code at
OK
Press
Select
Security code:
,

Phone lock

This feature protects your phone from unauthorized outgoing calls or unauthorized access to information stored in the phone.
With phone lock activated, displayed each time you turn your phone on or off. You will be prompted for your lock code when you press either
Phone locked
53
will be
Names
Menu (Call not allowed
or
will be displayed if you attempt to place a call while phone is locked). Once your lock code has been accepted, your phone will function normally.
Activating and deactivating phone lock
Menu
Press
4-3-2-1 (
Access codes
press OK. Then scroll to On or Complete the phone lock activation or deactivation by turning your phone off and back on.
When your phone is locked, calls may be possible to the emergency number programmed into your phone (e.g. 911 or other official emergency number) including calls with Emergency key 9 (
You can also store a number in the
number
location, which allows you to call this number
even though your phone is locked (S
Phone lock
-
Settings
Security settings
-
). Enter the lock code then
Off
, and press OK.
page35
).
Unlocked phon e
ee page72 for details
Answering a call with phone lock on
Press any key except and

Phone settings

Phone settings allows you access to other phone features such as an alarm clock and your phone’s language.
Using phone se ttings
Menu
Press to one of the following options, then press
4-2-1 4-2-2 4-2-3 4-2-4 4-2-5
Settings
4-2 (
Clock
-
Alarm clock Touch tones
-
See page30
See page47
-
See page70
-
Phone settings
.
Restore factory settings Language
See page42
-
. .
-
.
), then scroll
Select
See page57
-
).
:
.
54

Profiles

You can adjust and customize your phone to whatever environment you find yourself in (e.g. shopping, a movie, etc.). Each profile uses its predefined settings to determine your phone’s ringing volume, ringing tone, message alert tone, keypad tones, warning tones, etc., for a number of different environments.
These settings can be changed at any time, and each profile can be selected in a matter of seconds.
Note: Restore factory settings (see page57) will reset any changes made in profiles back to the factory defaults. The default setting is
.
Normal
Accessing profiles
Menu
Press
Selecting a profile
Quickly press the key to view a list of the available profiles. Then press press OK.
When you select a profile other than appear on the start screen.
This only allows you to select a profile; you can not customize them here. Keep reading to learn how to customize a profile.
3
W
or V to choose another profile and
Normal
, it will

Customizing profiles and other options

Menu
Press press
Once may appear as your choices. Once you have selected and highlighted one of these items, press OK. If you wish to go back to the main menu, press
Select
Profiles
3 (
Options
.
Options
is selected,
activates the profile.
) and scroll to desired profile, then
Select, Customize
Back
.
55
and
Rename
Customize
allows you to customize a profile by changing its settings. When you reach one of the fol­lowing settings within a profile, press
Select
. Once
you make your choice within that setting, press OK.
• Ringing options
• Ringing volume
•Ringing tone
•Vibrating alert
• Keypa d t o ne s
• Warning an d game tones
• Message alert tone
Note: your phone has been connected to a car kit or a heads et. However, they will remain in the menu once connected for the first time.
Note: When you change a setting in any profile, it only affects that profile and will not change your phone’s normal settings.
Automatic answer Rename
allows you to rename certain profiles.
Car
Headset
and
(appears only in
Lights
Car
)
Car
(appears only in
will not appear in the profiles list unless
and
Headset
)

Renaming profiles

1.
2.
3.
4.
Note:
Menu
Press
3 (
Profiles
) Scroll to desired profile, then press Scroll to
Rename
and press
OK
Enter new name and press OK again
Normal, Car
, and
Headset
profiles can not be renamed.
Options

Received calls

If Caller ID is available, this feature shows you the phone numbers of the 10 most recent calls you’ve answered.
Menu
Press to scroll the numbers .
Also, see “Call log” on page24 for details on other call lists.
2-2 (
Call log
56
Received call s
-
), then
W
Received calls options
See “Call log options” on page24
.

Restore factory settings

You can reset the settings of many of your phone’s features to factory defaults (as in a new phone).
Restoring factory setti n gs
Menu
Press
factory settings
Note: Your phone book, timers, language selection, security code and lock codes are not reset. However, any profiles you have modified will reset when you restore your settings. Plus, if you are using your phone’s clock [versus using the network provided clock] it will reset as well.
Settings
4-2-4 (
), enter security code and press OK.
Phone settings
-
-
Renaming profiles
See “Profiles” on page 55.

Restrict calls

This feature allows you to restrict incoming and outgoing calls. Outgoing and incoming calls are restricted from a list of restrictions that you create yourself.

Restricting incoming and outgoing calls

Upon selecting
incoming calls
options:
Select
outgoing calls list.
Add restriction
outgoing call restrictions. Once you have accessed
at least one restriction, the following options will be added to the menu for that option:
Edit
allows you to edit an existing outgoing call restriction.
Restrict outgoing calls
from the menu, you ar e pres ented with 2
allows you to select call restrictions from the
allows you to create your own list of
Add restriction
Restrict
or
and have added
Restore
57
Erase
will erase any existing outgoing call restrictions.
Note: When calls are restricted, calls may be possible to the emergency number programmed into your phone (e.g. 911 or other official emergency numbers). However, Emergency key 9 may not operate depending on the type of restriction you choose.

Adding outgoing and incoming call restrictions

You can add up to 10 restrictions for outgoing calls, and 15 for incoming calls. The maximum number of characters you can enter for each restriction is 15.
1.
2.
3.
4.
5.
6.
Menu
Press
Restrict calls
Restrict outgoing calls
Scroll to
incoming calls
Enter the security code and press
Note: The message “Caller ID must be available” will display prior to creating an incoming call restriction.
Press W or V to outgoing or incoming call restriction and press
Settings
4-3-1 (
)
and press
Add restriction
Security settings
-
Restrict
or
Select
OK
to create an
-
OK
Enter the number string you wish to restrict and press OK, for example:
If you wish to restrict all calls that begin with 1, enter 1
If you wish to restrict all calls that begin with 1972, enter 1972
If you wish to restrict all calls that begin with 214, enter 214
If you wish to enter a name for the call restriction, enter the name using your phone’s keypad, then press OK. If a name is not entered, the number that is restricted will appear in place of the name.
Note: When creating a new restriction, that restriction is automatically selected (enabled) at the time it is saved.
58
Selecting call restrictions
1.
2.
3.
4.
5.
6.
Menu
Press
Restrict calls
Restrict outgoing calls
Scroll to
incoming calls
Enter the security code and press
Select
Scroll to
4-3-1 (
)
and press
and press
Settings
Security settings
-
Restrict
or
Select
OK
OK
Scroll to each restriction you wish to use and press
Mark
Press
Unmark
; press
Back
and then press
to deactivate existing restrictions
Yes
Save changes?
at
Editing call restrictions
1.
2.
3.
4.
5.
6.
7.
Menu
Press
Restrict calls
Restrict outgoing calls
Scroll to
incoming calls
Enter the security code and press
Edit
Scroll to
4-3-1 (
)
and press
and press
Settings
OK
Security settings
-
Restrict
or
Select
OK
Scroll to the restriction you wish to edit, press
Note: If no name has been entered for a restri ction, the restricted number will be displayed.
Press and hold enter the new characters. Or use
Clear
to erase entire number, then
W
or V to move the cursor to the desired location and delete a character or insert additional characters. Press OK when finished.
Edit name if desired using same procedure as above
-
-
OK
Erasing call restrictions
1.
2.
3.
Menu
Press
Restrict calls
Restrict outgoing calls
Scroll to
incoming calls
4-3-1 (
)
and press
Settings
Enter the security code and press
59
Security settings
-
Restrict
or
Select
OK
-
4.
5.
6.
Note: The All calls option cannot be erased and therefore does not appear in the list of restrictions to be deleted.
Scroll to
Erase
and press
OK
Scroll to the restriction you wish to erase, press Press OK again to erase restriction

Ringing optio ns

This is one of the settings in your phone’s profiles
see page 55
(
). It allows you to choose whether or not your phone rings, beeps, or remains silent when someone calls you. This feature does not affect incoming text message alert tones (
see page 67)
.
Selecting ringing options
1.
2.
3.
4.
Note: The Ascending ringing option plays the selected ringing tone at a low volume, then gradually increases in intensity with each ring.
Menu
Press
3 (
Profiles
)
Your phone lists each profile. UseýW to highlight the profile you want and press
or
Silent
Customize
, then press
Ring, Ascending, Ring once, Beep
and press
Highlight
Ringing opt ions
Highlight either
once
Options
.
and press OK. Press W to
Select
.
OK

Ringing tone

This is one of the settings in your phone’s profiles
see page 55
( ringing tones your phone uses for incoming voice calls.
If you set
once
incoming calls can still be received.
). It allows you to choose one of the many
Ringing Options
see page59
(
) to
Silent
, ringing tones are automatically disabled; however,
or
OK
Beep
Selecting ringing tones
1.
Press
Menu
3 (
Profiles
)
60
2.
Your phone lists each profile. UseýW to highlight the profile you want and press
3.
Highlight
Ringing tone
4.
Press W to scroll through the options. After you hear
Customize
, then press
Options
.
and press OK. Press W to
Select
.
the tone you wish to use, press OK.

Ringing volume

This feature, which is found within your phone’s profile settings, allows you to adjust your phone’s ringing volume.
See “Volume” on page74 for details.
Saved
This is where saved text messages are stored.
See “Text messages and paging” on page67 for details.

Scrolling view

You have three different options on how you can view the phone book. Your choices are:
Name list
names will appear at any given time. To view other names in the directory, scroll back and forth through the list using
Name+number
stored in your directory. Only one name will display on your screen at a time, with the corresponding phone number. Use
Name only
display. To view other names, use the corresponding phone number by pressing then
shows all stored names in a scrolling list. Three
W
Name list
or V.
is the defa ult setting .
displays individual names and numbers
W
or V to view other names.
shows individual names only on a full screen
W
or V. You can view
W
or V.
Details
,
Selecting your scrolling view
1.
Press
Names
61
2.
3.
4.
Options,
Scroll to
Select
Press
then press
Scrolling view
at
Press W or V to select either
Name+number
Name only
, or
Select
Name list
, then press
,
OK

Security settings

This menu includes the following security features:
Restrict calls
4-3-1
Access codes
4-3-2
Access codes
The
Unlocked phone nu mber
page44
(
Change security code
), and
See page57
-
See page17
-
submenu includes
page72
(
. .
Phone lock Change lock code
),
(
page62
(
).

Security code

Your phone will prompt you for a five digit security code for certain features. These features can be used only after the correct security code has been successfully entered.
Note: When entering your security code, ***** will appear on the display to keep others from viewing your code.
If you make a mistake entering the code, erase the last entered digit by pressing to delete all the digits on your display). Then enter the correct code or press
If you enter an incorrect security code ( appear) five times in a row, your phone won’t accept any entries for the next five minutes.
Your phone’s default security code is 12345. It’s highly recommended that you change this code at once, write it down, and store it in a safe place away from your phone.
Clear
(or press and hold
Back
to exit the current feature.
Code error
page53
Clear
will
),

Changing your security code

1.
2.
Menu
Press
Access codes
4-3-2-4 (
Settings
Change security code
-
Enter security code and press
62
Security setti ngs
­)
OK
-
3.
Enter new security code at
code:
, press OK (must be five digits)
4.
Enter new security code again at
security co de:
5.
Phone will display
Note: If you have changed your security code and don’t remember the new code, contact your service provider. Once you have changed your security code, the default setting is no longer valid.
, press
Enter new security
Verif y new
OK
Security code changed

Send own caller ID with next call

In most service areas, when you call someone your name will be presented to his/her caller ID (if they subscribe). This feature allows you to block their caller ID (your number will not be displayed) when you call them. This feature works on a per-call basis. Contact your service provider for more details.
Please be aware of the following:
• This feature is only effective when calling to a number that is equipped with Caller ID.
• This feature is available only when supported by the wireless network, and may not function if you are roaming.
Note: Before you ca n activate this feature, you sh ould first store the feature code given to you by your service provider. Otherwise, this feature may not appear in the menu or function properly. Check with your service provider to confirm if the feature code has been pre-programmed for you. See “Network feature setting” on page48 for more details.
1.
2.
3.
4.
Menu
Press
Send own caller ID with next call
W
Yes
to
(to show your number) or No (to not show
it) and press
4-4-3 (
OK
Settings
Network services
­)
Enter the number you wish to call (or press to retrieve the number from the phone book and press OK), then press
OK
Your phone will attempt to call this number with the feature code you stored in Menu 4-4-4 (
feature setting” on page48
)
see “Network
Search
-
63

Settings

This main menu allows you access to other features. See these individual entries for more information.
Call settings
4-1
Phone settings
4-2
Security settings
4-3
Network se rvices
4-4
See page24
-
See page54
-
-
-
.
See page62
See page49
.
.
.

Storing a name and number

You can save names and numbers in the Phone book. Either use the method described in “Storing a name and number” on page 52 or the “quick save” method described below.

Quick save

Enter the phone number and press
Name:
if you wish (optional), then press OK.
Note: To save the number without entering a name, press and hold Save for 2 seconds. The number will appear at the end of your phone book list.
Also, see “Entering text and numbers” on page36.
Save
. Enter a name at

Synchronization

Your phone supports synchronization of its phone book with many popular Personal Information Manager (PIM) programs (e.g. Lotus Organizer, Microsoft Outlook, Symantic ACT!) by using 3rd party software.
Synchronization of contacts and phone numbers between your phone and PC will also require the optional DAU-9P serial cable. Check with your local Nokia dealer for the availability of these products.
64

System Selection

The System menu ( your phone will work when you are outside of your primary or “home” system. How your phone will handle being out of your home area can significantly affect the types and amounts of additional charges you may incur.
Service Types
In each wirel ess service a rea there are usual ly two serv ice providers, referred to as type A and type B.
When you first set up your wireless service account, your service provider will inform you of which system you will be using (e.g. type A). This is your home system. The other system (e.g. type B) is known as a non home-type system.

Roaming

Roaming is a term used to indicate that your phone is not in its home area. When you place or receive calls while roaming, you are actually using another service provider’s system to complete your call. Therefore, calls made or received while roaming are usually more expensive than calls made in your home area.

Roaming indicators

When your phone begins roaming, it displays roaming in a non-preferred system, your phone will also
Roaming
display display.
Menu-
5) allows you to modify how
'
will appear at the top of the
and a
Roaming
. If

System choices

Your phone will automatically attempt calls using a preferred system. If your phone fails to find a preferred system, then it will use the selection you have chosen with this feature.
Note: Before making modifications to your system selection setup, contact your service provider to ascertain how these changes may affect your phone bill.
65
Automatic
hometype system before trying to use a non home-type system.
SemiAuto A
system A unless a home or preferred system is available.
Note: This text may not appear in some systems.
SemiAuto B
system B unless a home or preferred system is available.
Note: This text may not appear in some systems.
Home area
phone will display your home area.
means your phone will attempt calls to a
means your phone will attempt calls to
means your phone will attempt calls to
means your phone cannot roam at all. Your
No Service
when you travel outside of

Custom menu

Depending on your service provider, the options displayed for the System menu may include the following:
Automatic
hometype system before trying to use a non home-type system.
[Service Provider’s Na me ]
attempt calls via your service provider’s system only. If your service provider’s system is unavailable, your phone will display
Analog
using an available analog system.
means your phone will attempt calls to a
means your phone will
No service
means your phone will attempt to place a call
.
Which system should you cho ose ?
By default, your phone is set to automatically search for the most cost-effective system when you are outside of your home area. For example, if your home system is type
A
and you are roaming, your phone will automatically try to use the local hometype system (the type A system in your current location). The type B system would be a non home-type system.
However , in an are a where no ho me or pr eferre d syst ems are available, use this menu to manually choose which system your phone uses.
66
By setting your phone to use a home-type or a preferred system, it’s possible for you to receive discounted roaming charges. Check with your service provider to maximize use of this feature.
In non-preferred systems, normal roaming charges are determined by the host system. Your phone is designed to select a system most favorable to you concerning the cost of the call and reception quality.
Note: When roaming in some systems, you may need to have a roaming agreement in order to place a call. If no roaming agreement has been arranged, a network operator may interrupt and request information on how you intend to pay for the call.

If you have more than one phone number

The currently-selected NAM in your phone determines which system is your current home system.
See “NAM selection” on page47 for more details.

Text messages and pagi n g

When you subscribe to the text messaging network service, you can receive text messages and pages with your phone. See your service provider for details and availability.
Text message options
Inbox
is where incoming messages are received and
stored. All new, unread messages are kept here.
Saved
is where all saved, read messages are kept here.
Erase all
allows you to erase all text messages. However,
unread text messages will not be erased.
Receiving text messages
The maximum length of a received text message is about 250 characters. Your phone has space to receive up to 30 text messages, depending on the length of each one.
Note: Text messages that you receive with your phone may appear different at times, due to messages that originate in networks other than your own. This does not affect the use of your phone in any way.
67
Also, the maximum length of a text message may depend on the network’s capabilities. See your service provider for additional text messaging information.
When you receive a text message
Text messages are shown in the order that they were received, in their order of priority.
New emergency message
indicates that the message or page received was sent by someone via the service provider. Emergency messages are sent only in situations where life and/or property are in immediate danger. Emergency messages are listed first and will override all other messages.
Urgent
messages are also high priority messages,
although emergency messages have higher priority.
Message received
indicates the existence of an unread message or page. If more than one message exists, the number of received messages will be displayed, followed by the messages or pages in the order they were received.

Reading text messages

Message received
With
1.
2.
Press Press
Read Read
displayed,
and scroll to new message
again
Reading options
Options
Press the following reading options.
Erase Save Use number
the incoming text message, permitting you to either save the number in your phone book
page51) back” on page 69).
while a text message is displayed to ac cess
will erase the message.
will save the message to the
Saved
captures the telephone number displayed in
(see “Phone book” on
, or place a call to the number
(see “Calling someone
folder.
68

Erasing a text message

1.
With the message on the display, press
2.
3.
Erase
Scroll to
and press
Press OK again at
OK
Erase message?
Options

Erasing all text messages

1.
2.
3.
Menu 01
Press
Erase all
)
-1-5 (
Messages
Text messages
-
Scroll to the desired option:
All messages
will erase all messages that have been
read from both the Inbox and Saved folder.
Inbox
will erase only those messages in your Inbox
that have been read.
Saved
will erase messages in the Saved folder.
Enter your security code and press
OK
-

Receiving a page

Your phone will display will display
Call:
person who paged you. Names will appear only if that person has been stored in the phone book.
Message received
. The message
, followed by the name or number of the
Calling someone back
The message along with the phone number must be visible on your phon e’s scr een. Whil e the tex t messag e is displayed,
1.
2.
Press Select
Options
Use number
, then press
OK
To quickly call back a number in a me ssage
Press while the message (including the phone number) is displayed. After the number has been displayed on the screen for 3 seconds, the call will be placed.
69
Note: If more than one number is on the display, the numbers are displayed in a list. Simply select the phone number you want to call and press . If no numbers are found, your phone will display
No number found
.
When your phone’s memory is full
When you have an incoming text message and your phone’s memory is full, one or more messages, of lowest priority, will automatically be deleted in order to receive the new text message.
If the message memory is still full, your phone will display
No space: read messages
.
You can clear this notification
by pressing OK.
Note: Messages are usually deleted from your Inbox. An incoming emergency message may delete messages from your Saved folder.

Touch tone length

This feature determines the length of each touch tone when they are sent automatically.
Short
sets the tone length to .1 second.
Long
sets the
tone length to .5 second. You can set the touch tone length by pressing
Settings
4 2 3 2 (
tone length
Phone settings
-
).

Touch tones

-
Menu
Touch tones
Your phone can generate various sounds, called touch tones, when the key s are pressed. These are also known as DTMF tones.
Touch tones can be used for many a uto mat ed, ov er- the ­phone services such as checking bank balances, airline arrival and departure times, and using voice mailbox options. Touch tones can be sent only when a call is active.
Touch
-

Storing touch tone strings

Store touch tone strings the same way you store phone numbers (
see page52
).
70
You can store a whole digit sequence in your phone book and send it as touch tones for frequently-used strings of numbers.

Sending a touch tone string

Make sure Menu 4-2-3-1 (
Touch tones
Manual touch tones
-
Settings
During a call,
1.
2.
3.
Options
Press
Touch tones
Scroll to
and press
Enter touch tone string or recall string from the phone book and press OK
Note: Use caution when sending confidential information over the air when using DTMF tones in analog mode.
Phone settings
­) is not set to
OK
Off
­.
Storing touch tone strings with phone numbers
1.
Enter the phone number (e.g. your office voice mailbox)
2.
3.
4.
Note: See “Special Characters (for storing and calling numbers)” on page38 for details on “p” and “w” characters.
When you dial this number, your phone first dials the phone number , then wai ts (because of the “w” characte r) for you to press password.
If you include a “p” character instead of a “w”, your phone pauses for 2.5 seconds, then automatically sends your password as touch tones.
Press
∗∗∗
(p) or
∗∗∗∗
(w)
Enter the touch tone string (e.g. voice mailbox password)
Store the number as you normally would
Send
. Your phone then sends your
Linking phone numbers with touch tone strings
This feature allows you to store a phone number in one phone book location and link it to another phone book location that contains a touch tone string.
71
First, you must store the touch tone string into a phone book location and then assign it a one-touch dialing
(see “One-touch dialing” on page49).
location
1.
Enter the phone number you wish to link with the touch tone string.
2.
Press * twice (you should have a + character next to the phone number.
3.
Enter the one-touch dialing location where the touch tone string is stored (e.g. if the string is stored in location 2, then enter 2)
4.
Press
Save
and then enter the name that corre-
sponds with the phone number (this is optional)
5.
Press
OK
When you wish t o call this numbe r , m a ke the call as you normally would. Then, when you wish to send the touch tone string, simply press OK.

Unlocked phone number

When the phone lock is on, no cal ls can be made. But if you store a number in the unlocked phone number location, you can make a call to that nu mber while the phone is l ocked.
See “Phone lock” on page53 for details on phone lock.
Storing the unlocked phone n umb e r
1.
2.
3.
4.
Menu
Press
Access codes
Enter lock code and press Enter phone number at
Settings
4-3-2-2 (
Unlocked phone number
-
-
OK
Number:
Security settings
and scroll through the phone book)
OK
Press
(or press
)
Search
-
Calling the unlocked phone number
Note: Your phone must be locked via the phone lock to use this feature.
At the start screen, press W or V once, then or you can manually enter the phone number as it is stored and press .
72

Vibrating alert

This is one of the settings in your phone’s profiles (
page55
). Your phone has an internal vibrating feature, so you can set your phone to vibrate when you receive a voice call.
Activating vibrating alert
1.
2.
3.
4.
Note: The vibrating alert does not work when your phone is con­nected to any charger or car kit. Also, if you have chosen the
once
vibrate once when your phone rings.
Menu
Press
3 (
Profiles
)
Your phone lists each profile. UseýW to highlight the profile you want and press
Highlight
Vibrating alert
Customize
, then press
Use W to highlight On or
Options
.
and press OK. Press W to reach
Select
.
Off
and press OK. If you
choose On, your phone will vibrate even if you have
Ringing options
set
option for the profile you’re using, the vibrating alert will only
see page59
(
) to
Silent
.

Voice mailbox number

This number dials your voice mailbox.
See “Voice messages” in next section.

Voice messag es

Voice mail is a network service that may require a subscription from your service provider.
Once everything is set up for y our v oice mail box ( see next page), your phone wi ll notify you when yo u receiv e a voice message.
New voice message
the icon, and you’ll hear a short beep. Your phone will display the number of voice messages if you’ve received more than one.
will appear on the display along with
see
Ring
73

Setting up your voice mailbox

Before you can ret r iev e a ny v o i ce mes s ag e s, yo u ne ed t o store your voice mailbox number. Your service provider usually gives this number to you.
When you’re ready to store your voice mailbox number,
Menu
press
mailbox numb e r
number and press OK. This number can be up to 32 digits long and is used until it’s changed. So if your phone number changes, you may need to chang e your voice mailbox number along with it.
Messages - Voice messages - V oice
01-2-2 (
). Then enter your voice mailbox phone

Greetings, passwords, and prompts

These may vary in different wireless systems. So if you need information about how to record your greeting or how to store your password, contact your service provider. You’ll also need to contact them on how to listen to voice messages once you’re connected to your voice mailbox.

Listening to your voice messages

New voice message
If follow the prompts. If you’d rather listen to your messages later, press
You can listen to messages anytime if you press and hold the 1 key (or press 1, then ). will appear on the display. Or if you prefer , you can access your voice mailbox by pressi ng
Voice messages - Listen to voice messages
is displayed, just press
Exit
.
Calling voice mailbox
Menu
01-2-1 (
Listen
and
Messages -
).

Volume

You can adjust the ringing volume and earpiece volume with your phone.

Earpiece volume

While in a phone call, you can adjust the listening volume for your phone’s earpiece. The top scroll key increases while the bottom one decreases the volume.
74
If an accessory like a headset or a car kit, or one with its own loudspeaker, is connected to your phone, the scroll keys will adjust the volume for that accessory.
Note: Using the scroll keys to adjust earpiece volume functions only during phone calls.

Ringing volume

This is one of the settings in your phone’s profiles ( the default ringing volume for incoming voice calls and message alert tones.
Setting the ringing v olume
1.
Press
2.
Your phone lists each profile. UseýW to highlight the profile you want and press
3.
Highlight
Ringing volu me
4.
Press W to scroll through the options. When you hear the volume level you wish to use, press OK.
Menu
see page 55
Profiles
3 (
Customize
, then press
). It sets
)
Options
.
and press OK. Press W to
Select
.

Warning and gam e t on es

This is one of the settings in your phone’s profiles
see page 55
( sounds your phone makes for conditions such as errors, confirmations, power on, battery low, and recharge battery, or sounds made during game play.
). Warning and game tones include those
Turning warning tones on and off
1.
2.
3.
4.
Menu
Press
3 (
Profiles
)
Your phone lists each profile. UseýW to highlight the profile you want and press
Highlight
Customize
Warning and game tones
Use Wýto highlight
Options
.
and press OK. Press W to
Select
On
, then press
Off
or
and press OK
75
.

Welcome note

You can program a welcome note into your phone to display a message when you first turn it on (e.g. hello, your name, a reminder, etc.). The maximum length is 36 characters.
1.
2.
3.
4.
The welcome note displays each time your phone is switched on. Characters you enter are added to the left of the cursor. Press cursor. Press
See “Entering text and numbers” on page36 for details.
Press
Menu
01-3 (
Messages
Welcome note
-
Enter new message or edit an existing one
Options
Press
Save
Press W to
W
Erase
or
Clear
V
or
to move the cursor right or left.
and press
to delete characters to the left of the
OK
)
76

6. Data and Fax Calls

Your phone can function as a fax/modem when connected to your PC or laptop computer via the optional DLR-3 Data Cable (available through your local Nokia dealer). You must also have the appropriate fax or data software installed and configured to send and receive data or faxes through your phone.
Can I receive a data or fax call while a voice call is in progress?
Yes. Your phone will display either depending on the type of incoming call. If no cable is connected, the phone will display
cable or Data call, connect data cable
ID, the caller’s name or number will also be displayed. You must first terminate the voice call, then launch the
appropriate data or fax software and allow the software to accept the incoming call.
Data call
Fax call, connect data
Can I receive other calls while a data or fax call is in progress?
No. The caller will receive a busy signal.
Can I place a voice call while a data or fax call is in progress?
No. If a voice call is attempted while a data or fax call is in progress, the phone will display data or fax call from your computer’s software, or press
Back
to return to the data or fax call in progress.
End data call?
Fax call
or
. If you have Caller
,
End the

Getting started

Make sure your phone is connected to your computer via the optional DLR-3 Data Cable and your computer recognizes the new hardware.
See the installation and configuration instructions supplied with the DLR-3 cable for more i nformation.
77

Configuring your data or fax software

Once properly connected and co nf igur e d , your PC wil l recognize your phone as an external fax/modem. However , your fax or data software may already be configured to use the existing PCMCIA or internal modem.
Before you can use your phone to send and receive data or faxes, you must reconfigure your fax or data software so that it uses your phone rather than your existing modem. You may consider creating a separate set of dialing properties to use when your phone is connected, rather than changing any existing settings.
Please refer to the documentation or online help files for your data or fax application when creating new dialing configurations, or modifying existing settings.

To start a data or fax call

Note: The restrict calls feature may affect any data/fax calls you attempt. If you experience problems, check your call restrictions. See page57 for details.
1.
Initiate a data or fax call using your data or fax software configured for your phone.
2.
When trying to connect to the network, the phone
Connecting...
displays
Data call
(or
duration of the data or fax call.
3.
Terminate the data call from your data software; fax calls typically terminate automatically.
Note: Avoid terminating a call by pressing your phone’s key. This may cause your data or fax application to tempor arily lock up and could cause loss of data.
Note: Data or fax calls cannot be initiated using your phone’s keypad. All data and fax calls must be initiated using the data or fax software.
Once connected, the tex t
Fax call
) remains on the display for the
78

To receive a data or fax call

Your phone must be connected to your PC via the data cable.
1.
The appropriate data or fax software must be run­ning. Consider setting your data or fax software to automatically answer incoming calls so you can receive them while away from your PC.
2.
Your phone will display either
Data call
or
Fax call
depending on the type of incoming call.
3.
Terminate the data call from your data software; fax calls typically terminate automatically.
Note: Avoid terminating a call by pressing your phone’s key. This may cause your data or fax application to tempor arily lock up and could cause loss of data.

Manual selection of inco ming data/fax calls

Certain service providers require that you preset your phone to receive the incoming data or fax call, rather than having the phone automatically detect the call type.
Check with your service provider to see if “pre-arrangement” of data and/or fax calls is necessary.
Most popular data and fax programs allow you to send additional initialization commands to the modem when the program is launched, or when the modem is instructed to receive a call. You will need to modify your phone’s modem configuration in the data or fax software so that it sends the following special initialization string to the modem:
,
To preset your phone to receive a data call:
AT+CSP=1
To preset your phone to receive a fax call:
AT+CSP=2
79
You should only have to make this modification once; these settings typically are saved as a part of your data or fax program’s settings. Please refer to the documentation or online help files for your data or fax application when modifying your modem’s initialization string.
When the software has sent the proper command to your phone, the phone will display
Ready for fax reception
or
Ready for data reception
momentarily, along with
either a d or f status indicator at the start screen. Once your phone is preset for either data or fax reception,
you cannot receive incoming voice calls. You must either remove the data cable or turn the phone’s power off and back on to restore normal voice call reception.
80

7. Accessories

If you want to enhance your phone’s functionality, an extensive range of accessories is available for you. You can select any of these items to help accommodate your specific communication needs. For availability of these and other accessories, contact your service provider.
A few practical rules for accessory operation:
Keep all accessories out of reach of small children. When you disconnect the power cord of any
accessory, grasp and pull the plug, not the cord. Check regularly that any vehicle-installed accessories
are mounted and are operating properly. Installation of any complex car accessories must be
made by qualified personnel only.
Use only batteries, chargers and accessories approved by the phone manufacturer for use with this particular phone model. The use of any other types may invalidat e any approval or warranty applying to the phone, and may be dangerous.
See page6 for important battery usage information. For availability of approved accessories, please check with your
authorized Nokia dealer.

Batteries

The following table shows battery options that are available for your phone, charging times with the Rapid Travel Charger (ACP-9U) and th e Standard Tra vel Charger (ACP-7U), talk times, and standby times. Consult your service provider for more information.
81

Charging Times

Battery Option
BLS-2 Extended Battery Li-Ion 900 mAh 4 hrs 2 hrs
BMS-2S Extended Battery NiMH 900 mAh 4 hrs 1 hr 30 min
BLS-4 Ultra Extended Battery Li-Ion 1500 mAh
ACP-7U
Charger
5-6 hrs 3 hrs 30 min
ACP-9U Charger
Note: The times displayed above are approximate and will allow your battery to obtain approximately 80% of its capacity. At this time, the battery scroll bars on your phone’s display will stop scrolling. If you wish to obtain 100% battery capacity, please allow another two hours to “trickle” or “maintenance” charge.

Standby and Talk Times

Battery Option
BLS-2 Extended
Battery Li-Ion
900 mAh
BMS-2S Extended
Battery NiMH
900 mAh
BLS-4 Ultra
Extended Battery
Li-Ion
1500 mAh
Digital
Talk Time
2 hrs to
2 hrs 55 min
2 hrs to
2 hrs 55 min
3 hrs 20 min to
4 hrs 50 min
Analog
Talk Time
40 min to
1 hr 25 min
40 min to
1 hr 25 min
1 hr 10 min to
2 hrs 25 min
Standby Time
70 to 110 hrs (dig) 10 to 15 hrs (ana)
70 to 110 hrs (dig) 10 to 15 hrs (ana)
115 to 180 hrs (dig)
15 to 23 hrs (ana)
Note: The times shown are approximate, and represent a range for either standby or talk times (not a combination of both). Battery operation times vary according to signal conditions, network parameters set by the service provider, and how you use your phone.
Note: Dispose of used batteries in accordance with any local regulations.
82

Chargers and Other Accessories

The following chargers and other accessories are available for your phone; please see your dealer for details. Also, refer to the accessories br ochure that was included in your sales package for the entire line of Nokia Original Accessories.
Standard Travel Charger (ACP-7U)
This lightweight (187g) and durable AC charger can be used with all battery options.
To use the Standard Travel Charger, plug it into a wall outlet and connect the lead from the charger to the base of your phone. The charger can also be used together with the Compact Desktop Charging Stand (DCH-8).
Rapid Travel Charger (ACP-9U)
This lightweight (100g) AC charger can be used with all battery options. Calls can be made during charging, even with a fully discharged battery.
To use the Rapid Travel Charger (ACP-9U), plug it into a standard 120V AC wall outlet, and connect the lead from the charger to the base of your phone.
The charger can also be used together with the optional Compact Desktop Charging Stand (DCH-8). Approximate charging times for discharged batteries are shown at the beginning of this section.
83
Rapid Cigarette Lighter Charger (LCH-9)
You can charge your phone’s battery from your vehicle battery by using the Rapid Cigarette Lighter Charger (LCH-9).
Calls are possible during charging. A green light indicates the charger is ready for charging (when not charging) or finished charging (if it has been charging). The battery charging times are the same as those for the Rapid Trav el Charger (ACP-9U)
The input voltage range is from 11 to 32V DC, negative grounding. Avoid prolonged charging with the Rapid Cigarette Lighter Charger (LCH-9) when the car engine is not running; this may cause the battery of your car to drain. Note also that in some cars the cigarette lighter plug is not provided with electricity if the ignition is not switched on.
Compact Desktop Charging Stand (DCH-8)
Used together with the Standard Travel Charger (ACP-7U) or the Rapid Travel Charger (ACP-9U), the Compact Desktop Charging Stand (DCH-8) is an economical choice when you need your phone close at hand.
With the battery still attached, place your phone in the charging stand to begin charging your phone’s battery.
Charging is indicated by the scrolling battery bars on the right side of your phone’s display. When the scrolling stops, the battery is approximately 80% charged.
To get a fully charged battery, leave your phone in the charging stand for a couple of hours after the scrolling stops.
84

8. Troubleshooting

What if charging fails?
If your phone displays suspended. Make sure the battery is connected to an approved charging device and that the battery is at room temperature. Extreme temperatures, hot or cold, can affect your battery’s performance and prevent charging.
If charging still fails, disconnect the charger from your phone. Then reconnect the charger to retry. If you still experience charging problems, contact your dealer and, if necessary, bring your phone in to have it serviced. Also remember to bring in your battery and charger.
No service
If you’re outside the wireless service area, display on your phone. No calls can be made or received, including emergency calls.
What if the call doesn’t go through?
Your phone can make and receive calls only when it’s switched on and in the wireless network’s service area.
No service
wireless service area. No calls can be made or received.
See “Checking signal strength” on page14.
Check call restrictions
you tried to call are restricted (
page57 page53
Note: Check with your service provider for information about when you need to di al a ‘1’ and/or a n ar e a co d e in addition t o the number.
means that you’re probably outside the
), or your phone is locked (
).
Not charging
means calls to the phone number
, charging is
your
phone and
No servic e
see “Restrict calls” on
see “Phone lock” on
will
If you make a mistake dialing
Clear
Press and hold
to delete the last character entered, or press
Clear
to delete all characters entered.
85

9. Reference Information

Important Sa f e t y Information
Traffic Safety
Do not use a hand-held telephone while driving a vehicle. If using a hand-held phone park the vehicle before conversing. Always secure the phone in its holder; do not place th e phone on the passenger seat or where it can break loose in a collision or sudden stop.
The use of an alert device to operate a vehicle’s lights or horn on public roads is not permitted.
Remember, road safety always comes first!
Operating Environment
Remember to follow any special regulations in force in any area and always switch off your phone whenever it is forbidden to use it, or when it may cause interference or danger.
When connecting the phone or any accessory to another device, read its user’s guide for detailed safety instructions. Do not connect incompatible products.
As with other mobile radio transmitting equipment, users are advised that for the satisfactory operation of the equipment and for the safety of personnel, it is recommended that the equipment should only be used in the normal operating position (held to your ear with the antenna pointing over your shoulder).
Electronic Devices
Most modern electronic equipment is shielded from radio frequency (RF) signals. However, certain electronic equipment may not be shielded against the RF signals from your wireless phone.
Pacemakers
Pacemaker manufacturers recommend that a minimum separation of 6 inches (20 cm.) be maintained between a handheld wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research. Persons with pacemakers:
• Should always keep the phone more than 6 inches (20 cm) from their pacemaker when the phone is switched on;
86
• Should not carry the phone in a breast pocket;
• Should use the ear opposite the pacemaker to minimize the potential for interference.
• If you have any reason to suspect that interference is taking place, switch off your phone immediately.
Hearing Aids
Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want to consult your service provider.
Other Medical Devices
Operation of any radio transmitting equipment, including cellular phones, may interfere with the functionality of inadequately protected medical devices. Consult a physician or the manufacturer of the medical device to determine if they are adequately shielded from external RF energy or if you have any questions. Switch off your phone in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles (e.g. electronic fuel injection systems, electronic anti-skid (anti-lock) braking systems, electronic speed control systems, air bag systems). Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle.
Posted Facilities
Switch your phone off in any facility where posted notices so require.
Potentially Explosive Atmospheres
Switch off your phone when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death.
Users are advised to switch off the phone while at a refueling point (service station). Users are reminded of the need to observe restrictions on the use of radio equipment in fuel depots (fuel storage and distribution areas), chemical plants or where blasti ng operations are in progress.
87
Areas with a potentially explosive atmosphere are often but not always clearly marked. They include below deck on boats; chemical transfer or storage facilities; vehicles using liquefied petroleum gas (such as propane or butane); areas where the air contains chemicals or particles, such as grain, dust or metal powders; and any other area where you would normally be advised to turn off your vehicle engine.
Vehicles
Only qualified personnel should service the phone, or install the phone in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty which may apply to the unit.
Check regularly that all wireless phone equipment in your vehicle is mounted and operating properly.
Do not store or carry flammable liquids, gases or explosive materials in the same compartment as the phone, its parts or accessories.
For vehicles equipped with an air bag, remember that an air bag inflates with great force. Do not place objects, including both installed or portable wireless equipment, in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result.
Switch off your phone before boarding an aircraft. The use of wireless telephones in an aircraft may be dangerous to the operation of the aircraft, disrupt the wireless telephone network and may be illegal.
Failure to observe these instructions may lead to the suspension or denial of telephone services to the offender , or legal action, or both.
Emergency Calls
IMPORTANT!
This phone, like any wireless phone, operates using radio signals, wireless and landline networks as well as user-programmed functions which can not guarantee connection in all conditions. Therefore, you should never rely solely upon any wireless phone for essential communications (e.g. medical emergencies).
Remember, to make or receive any calls the phone must be switched on and in a service area with adequate signal strength. Emergency calls may not be possible on all wireless phone networks or when certain network services and/or phone features are in use. Check with local service providers.
88
Making an Emergency Call
1. If the phone is not on, switch it on
2. Key in the emergency number for your present location (e.g. 911 or other official emergency number). Emergency numbers vary by location.
3. Press
If certain features are in use (keyguard, restrict calls, etc.), you may first need to turn those features off before you can make an emergency call. Consult this document and your local cellular service provider.
When making an emergency call, remember to give all the necessary information as accurately as possible. Remember that your wireless phone may be the only means of communication at the scene of an accident - do not cut off the call until given permission to do so.
Radio Frequency (RF) Signals
Your wireless handheld portable telephone is a low power radio transmitter and receiver . When it is O N, it receives and also sends out radio frequency (RF) signals.
In August, 1996, the Federal Communications Commission (FCC) adopted RF exposure guidelines with safety levels for handheld wireless phones. Those guidelines are consistent with safety standards previously set by both U.S. and international standards bodies:
ANSI C95.1 (1992)*, NCRP Report 86 (1986)*, ICNIRP (1996)*. Those standards were based on comprehensive and periodic
evaluations of the relevant scientific literature. For example, over 120 scientists, engineers, and physicians from universities, government health agencies and industry reviewed the availa ble body of research to develop the ANSI Standard (C95.1).
The design of your phone complies with the FCC guidelines (and those standards).
*American National Standards Institute, National Council on Radiation Protection and Measurements; International Commission on Non-Ionizing Radiation Protection.
89
Care and Maintenance
Your phone is a product of superior design and cr aftsmanship and should be treated with care. The suggestions below will help you to fulfill any warranty obligations and allow you to enjoy this product for many years. When using your phone, battery, charger, OR any accessory:
• Keep it and all its parts and accessories out of small children’s reach.
• Keep it dry. Precipitation, humidity and liquids contain minerals that will corrode electronic circuits.
• Do not use or store it in dusty, dirty areas as its moving parts can be damaged.
• Do not store it in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics.
• Do not store it in cold areas. When the phone warms up (to its normal operating temperature), moisture can form inside the phone, which may damage the phone's electronic circuit boards.
• Do not attempt to open it. Non-expert handling of the device may damage it.
• Do not drop, knock or shake it. Rough handling can break internal circuit boards.
• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean it. Wipe it with a soft cloth slightly dampened in a mild soap-and-water solution.
• Do not paint it. Paint can clog the device’s moving parts and prevent proper operation.
• Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications or attachments could damage the phone and may violate regulations governing radio devices.
• If the phone, battery, charger, or any accessory is not work­ing properly, take it to your near est qualified service facility. The personnel there will assist you, and if necessary, arrange for service.
90

10. Tec hnical Data

Wireless System Dual-Band CDMA and AMPS Weight 142.5 g (5.0 oz.) with BLS-2
Size 129 cc (7.9 cu. in.) Frequency Range
Lowband 824.04 - 848.97 MHz (TX)
Highband 1850.04 - 1909.92 MHz (TX)
Battery Voltage 3.6 V nominal Charging current 850 mAh max. Operating Temperature -30°C to + 60°C
Number of Channels 832 lowband; 1150 highband Number of NAMs 2
Memory Locations 200 Memory Capacity Alpha: 16 characters per location
Data transmission 14.4 kbps Fax Group 3 Send/Receive (14.4 kbps)
Nokia, Connecting People and the Original Accessories logos are trademarks of Nokia Corporation and/or its affiliates.
The information contained in this phone was written for dual­mode CDMA and AMPS phones.
The right to make changes and improvements to any of the products described in this guide without prior notice is reserved.
©1999 Nokia Mobile Phones. All rights reserved. These commodities are authorized by the U.S. Government for
export only to Canada, Mexico, or the United States. They may not be resold, diverted, transferred, or otherwise disposed of in any other country, either in their original form or after being incorporated through an intermediate process into other end­items, without the written approval of the U.S. Department of State.
Part No. 9352105 Issue No. 3 Printed in Canada 09/99
900 mAh Li-Ion Battery
869.04 - 893.97 MHz (RX)
1930.08 - 1989.96 MHz (RX)
(-22°F to + 140°F)
Numeric: 32 digits per location
91

11. Warranty

NOKIA One-Year Limited Warranty

Nokia Mobile Phones, Inc. (“NMP”) warrants that this cellular phone (“Product”) is free from defects in material and workmanship that result in Product failure during normal usage, according to the following terms and conditions:
1. The limited warranty for the Product extends for ONE (1) year
beginning on the date of the purchase of the Product.
2. The limited warranty extends to the original purchaser of the
Product (“Consumer”) and is not assignable or transferable to any subsequent purchaser/end-user.
3. The limited warranty extends only to Consumers who purchase
the Product in the United States.
4. During the limited warranty period, NMP will repair, or replace,
at NMP's option, any defective parts, or any parts that will not properly operate for their intended use with new or f actory rebuilt replacement items if such repair or replacement is needed because of product malfunction or failure during normal usage. No charge will be made to the Consumer for any such part s. NMP will also pay for the labor charges incurred by NMP in repairing or replacing the defective parts. The limited warranty does not cover defects in appearance, cosmetic, decorative or structural items, including framing, and any non-operative parts. NMP's limit of liability under the limited warranty shall be the actual cash value of the Product at the time the Consumer returns the Product for repair, dete rmined by th e price paid by the Consumer for the Product less a reasonable amount for usage. NMP shall not be liable for any other losses or damages. These remedies are the Consumer’s exclusive remedies for breach of warranty.
5. Upon request from NMP, the Consumer must prove the date of
the original purchase of the Product by a dated bill of sale or dated itemized receipt.
6. The Consumer shall bear the cost of shipping the Product to
NMP in Melbourne, Florida. NMP shall bear the cost of shipping the Product back to the Consumer after the completion of service under this limited warranty.
7. The Consumer shall have no coverage or benefits under this
limited warranty if any of the following conditions are applicable: a) The Product has been subject to abnormal use, abnormal
conditions, improper storage, exposure to moisture or dampness, unauthorized modifications, unauthorized connections, unauthorized repair, misuse, neglect, abuse, accident, alteration, improper installation, or other acts which are not the fault of NMP, including damage caused by shipping.
92
b) The Product has been damaged from external causes such as collision with an object, or from fire, flooding, sand, dirt, windstorm, lightning, earthquake or damage from exposure to weather conditions, an Act of God, or battery leakage, theft, blown fuse, or improper use of any electrical source, or damage caused by the connection to other products not recommended for interconnection by NMP.
c) NMP was not advised by the Consumer in writing of the alleged defect or malfunction of the Product within fourteen (14) days after the expiration of the applicable limited warranty period.
d) The Product serial number plate or the accessory data code has been removed, defaced or altered.
e) The defect or damage was caused by the defective function of the cellular system or by inadequate signal reception by the external antenna.
8. If a problem develops during the limited warranty period, the Consumer shall take the following step-by-step procedure:
a) The Consumer shall return the Product to the place of purchase for repair or replacement processing.
b) If “a” is not convenient because of distance (more than 50 miles) or for other good cause, the Consumer shall ship the Product prepaid and insured to:
Nokia Mobile Phones, Inc. Attn: Repair Department 795 West Nasa Blvd. Melbourne, FL. 32901
c) The Consumer shall include a return address, daytime phone number and/or fax number, complete description of the problem, proof of purchase and service agreement (if applicable). Expenses related to removing the Product from an installation are not covered under this limited warranty.
d) The Consumer will be billed for any parts or labor charges not covered by this limited warranty. The Consumer will be responsible for any expenses related to reinstallation of the Product.
e) NMP will repair or authorize the repair of the Product under the limited warranty within 30 days after receipt of the Product by NMP or an NMP authorized service center. If NMP cannot perform repair covered under this limited warranty within 30 days, or after a reasonable number of attempts to repair the same defect, NMP at its option, will provide a replacement Product or refund the purchase price of the Product less a reasonable amount for usage.
93
Loading...