Nissan Rogue 2011 User Manual

Foreword

Welcome to the growing family of new NISSAN
owners. This vehicle is delivered to you with
confidence. It was produced using the latest
techniques and strict quality control.

This manual was prepared to help you under­stand the operation and maintenance of your
vehicle so that you may enjoy many miles of
driving pleasure. Please read through this
manual before operating your vehicle.

A separate Warranty Information Booklet
explains details about the warranties cov­ering your vehicle. The NISSAN Service
and Maintenance Guide explains details
about maintaining and servicing your ve­hicle. Additionally, a separate Customer
Care/Lemon Law Booklet (U.S. only) will
explain how to resolve any concerns you
may have with your vehicle, as well as
clarify your rights under your state’s lemon
law.

Your NISSAN dealer knows your vehicle best.
When you require any service or have any
questions, we will be glad to assist you with the
extensive resources available to us.

READ FIRST — THEN DRIVE SAFELY

Before driving your vehicle, read your Owner’s
Manual carefully. This will ensure familiarity with
controls and maintenance requirements, assist­ing you in the safe operation of your vehicle.

WARNING

IMPORTANT SAFETY INFORMA-

TION REMINDERS FOR SAFETY!

Follow these important driving rules to
help ensure a safe and comfortable trip
for you and your passengers!

. NEVER drive under the influence of

alcohol or drugs.

. ALWAYS observe posted speed lim-

its and never drive too fast for
conditions.

. ALWAYS give your full attention to

driving and avoid using vehicle
features or taking other actions that
could distract you.

. ALWAYS use your seat belts and

appropriate child restraint systems.
Pre-teen children should be seated
in the rear seat.

. ALWAYS provide information about

the proper use of vehicle safety
features to all occupants of the
vehicle.

. ALWAYS review this Owner’s Man-

ual for important safety information.

ON-PAVEMENT AND OFF-ROAD
DRIVING

This vehicle will handle and maneuver
differently from an ordinary passenger
car because it has a higher center of
gravity for off-road use. As with other
vehicles with features of this type, failure
to operate this vehicle correctly may
result in loss of control or an accident.
Be sure to read “On-pavement and off­road driving precautions”, “Avoiding colli­sion and rollover” and “Driving safety
precautions” in the “5. Starting and driv­ing” section of this manual.

MODIFICATION OF YOUR VEHICLE

This vehi cle should n ot be modified .
Modification could affect its performance,
safety or durability, and may even violate
governmental regulations. In addition,
damage or performance problems result­ing from modification may not be covered
under NISSAN warranties.

WHEN READING THE MANUAL

This manual includes information for all
options available on this model. Therefore,
you may find some information that does
not apply to your vehicle.

All information, specifications and illustrations in
this manual are those in effect at the time of
printing. NISSAN reserves the right to change
specifications or design at any time without
notice.

IMPORTANT INFORMATION ABOUT
THIS MANUAL

You will see various symbols in this manual. They
are used in the following ways:

WARNING

This is used to indicate the presence of
a hazard that could cause death or
serious personal injury. To avoid or
reduce the risk, the procedures must
be followed precisely.

SIC0697

If you see the symbol above, it means “Do not
do this” or “Do not let this happen”.

Arrows in an illustration that are similar to those
above call attention to an item in the illustration.

CALIFORNIA PROPOSITION 65
WARNING

WARNING

Engine exhaust, some of its constitu­ents, and certain vehicle components
contain or emit chemicals known to the
State of California to cause cancer and
birth defects or other reproductive
harm. In addition, certain fluids con­tained in vehicles and certain products
of component wear contain or emit
chemicals known to the State of Cali­fornia to cause cancer and birth defects
or other reproductive harm.

CAUTION

This is used to indicate the presence of
a hazard that could cause minor or
moderate personal injury or damage to
your vehicle. To avoid or reduce the risk,
the procedures must be followed care­fully.

If you see a symbol similar to those above in an
illustration, it means the arrow points to the front
of the vehicle.

Arrows in an illustration that are similar to those
above indicate movement or action.

CALIFORNIA PERCHLORATE ADVI­SORY

Some vehicle parts, such as lithium bat­teries, may contain perchlorate material.
The following advisory is provided: “Per­chlorate Material - special handling may
apply, See www.dtsc.ca.gov/
hazardouswaste/perchlorate.”

Bluetooth®is a trademark owned
by Bluetooth SIG, Inc., U.S.A.

XM Radio®requires subscrip­tion, sold separately. Not avail­able in Alaska, Hawaii or Guam.
For more information, visit
www.xmradio.com.

C

*

2010 NISSAN MOTOR CO., LTD.

All rights reserved. No part of this Owner’s
Manual may be reproduced or stored in a
retrieval system, or transmitted in any form, or
by any means, electronic, mechanical, photo­copying, recording or otherwise, without the
prior written permission of Nissan Motor Co.,
Ltd.

NISSAN CUSTOMER CARE
PROGRAM

NISSAN CARES ...

Both NISSAN and your NISSAN dealer are dedicated to serving all your automotive needs. Your satisfaction with your vehicle and your NISSAN dealer are
our primary concerns. Your NISSAN dealer is always available to assist you with all your automobile sales and service needs.

However, if there is something that your
NISSAN dealer cannot assist you with or you
would like to provide NISSAN directly with
comments or questions, please contact the
NISSAN Consumer Affairs Department using
our toll-free number:

For U.S. customers

1-800-NISSAN-1
(1-800-647-7261)

For Canadian customers

1-800-387-0122

We appreciate your interest in NISSAN and thank you for buying a quality NISSAN vehicle.

The Consumer Affairs Department will ask for
the following information:

— Your name, address, and telephone number

— Vehicle identification number (attached to

the top of the instrument panel on the
driver’s side)

— Date of purchase

— Current odometer reading

— Your NISSAN dealer’s name

— Your comments or questions

OR

You can write to NISSAN with the information at:

For U.S. customers

Nissan North America, Inc.
Consumer Affairs Department
P.O. Box 685003
Franklin, TN 37068-5003

For Canadian customers

Nissan Canada Inc.
5290 Orbitor Drive
Mississauga, Ontario L4W 4Z5

Table of

Illustrated table of contents

0

Contents

Safety — Seats, seat belts and supplemental
restraint system

Instruments and controls

Pre-driving checks and adjustments

Center display, heater, air conditioner, audio, phone
and voice recognition systems

Starting and driving

In case of emergency

Appearance and care

Maintenance and do-it-yourself

Technical and consumer information

1

2

3

4

5

6

7

8

9

Index

10

0 Illustrated table of contents

Seats, seat belts and Supplemental Restraint

System (SRS) ................................................... 0-2

Exterior front ..................................................... 0-3

Exterior rear ...................................................... 0-4

Exterior (Kro¯m models) ........................................ 0-5

Passenger compartment ...................................... 0-6

Instrument panel ................................................ 0-7

Meters and gauges............................................. 0-8

Engine compartment ........................................... 0-9

QR25DE engine ............................................ 0-9

Warning and indicator lights ............................... 0-10

SEATS, SEAT BELTS AND
SUPPLEMENTAL RESTRAINT
SYSTEM (SRS)

10. Rear seats (P.1-6)
— Child restraints (P.1-21)

11. LATCH (Lower Anchors and Tethers for CHildren)
System (P.1-22)

12. Child restraint anchor points (for top tether strap
child restraint) (P.1-34)

SSI0348

1. Supplemental front-impact air bags (Page 1-37)

2. Front seat-mounted side-impact supplemental air
bags (P.1-37)

3. Seat belts (P.1-10)

4. Head restraints (P.1-7)
— Front-seat Active Head Restraints (P.1-10)

0-2 Illustrated table of contents

5. Roof-mounted curtain side-impact and rollover
supplemental air bags (P.1-37)

6. Rear center seat belt (P.1-16)

7. Occupant classification sensor (pattern sensor)
— Advanced air bag system (P.1-43)

8. Front seats (P.1-3)

9. Seat belt pretensioner (P.1-49)

EXTERIOR FRONT

7. Power windows (P.2-48)

8. Recovery hook (P.6-15)

9. License plate installation (P.9-11)

10. Fog lights*
— Switch operation (P.2-36)
— Bulb replacement (P.8-26)

11. Tires
— Wheel and tires (P.8-29, P.9-7)
— Flat tire (6-2)
— Tire Pressure Monitoring System (TPMS)
(P.2-13, P.5-3)

12. Doors
— Keys (P.3-2)
— Door locks (P.3-4)
— Intelligent Key system* (P.3-10)
— Remote keyless entry system* (P.3-6)
— Security system (P.2-26)

13. Child safety rear door lock (P.3-6)

*: if so equipped

SSI0349

1. Hood (P.3-21)

2. Headlight and turn signal lights
— Switch operation (P.2-31)
— Bulb replacement (P.8-25)

3. Windshield wiper and washer
— Switch operation (P.2-29)
— Blade replacement (P.8-17)
— Window washer fluid (P.8-12)

4. Roof rack (rail)* (P.2-47)

5. Moonroof* (P.2-50)

6. Outside mirrors (P.3-29)

Illustrated table of contents 0-3

EXTERIOR REAR

8. Back-up light
— Bulb replacement (P.8-26)

9. Rear combination light
— Bulb replacement (P.8-26)

10. Fuel-filler door
— Operation (P.3-24)
— Fuel recommendation (P.9-3)

*: if so equipped

SSI0762

1. Lift gate (P.3-22)
— Intelligent Key system* (P.3-10)

2. Rear view camera* (P.4-9)

3. Rear window wiper and washer
— Switch operation (P.2-30)
— Window washer fluid (P.8-12)

4. Rear window defroster (P.2-31)

0-4 Illustrated table of contents

5. High-mounted stop light
— Bulb replacement (P.8-26)

6. Antenna (P.4-55)
— Satellite radio antenna* (P.4-21)

7. Sonar sensors*
— Sonar system* (P.5-21)

EXTERIOR (Kro¯m models)

For Kro¯m models, the vehicle parts listed below
require special care or caution for treating. Refer
to additional information in each section.

1. Front bumper (P.3-23, P.6-15)

2. Aluminum alloy wheels (P.7-4)

3. Rear bumper (P.3-23, P.6-15)

4. Exhaust pipes (P.3-23, P.6-15)

SSI0638

Illustrated table of contents 0-5

PASSENGER COMPARTMENT

SSI0351

10. Cargo area
— Storages (P.2-44)
— Luggage hooks (P.2-46)
— Cargo light (P.2-54)
— Spare tire (P.6-3)

11. Rear cup holders (P.2-41)

12. Console box (P.2-43)
— Power outlet* (P.2-40)

®

—iPod

or USB outlet connector* (P.4-37)

13. Front cup holders (P.2-41)

*: if so equipped

1. Cargo cover* (P.2-45)

2. Coat hooks (P.2-46)

3. Ceiling light (P.2-53)

4. Door armrest
— Power window switch (P.2-48)
— Power door lock switch (P.3-5)

5. Sun visors (P.3-27)

0-6 Illustrated table of contents

6. Moonroof* (P.2-50)

7. Front map lights (P.2-52)

8. Sunglasses holder (P.2-42)

9. Inside rearview mirror (P.3-27)
— Anti-glare adjustment* (P.3-28)
— HomeLink

®

universal transceiver* (P.2-55)

— Compass* (P.2-7)

INSTRUMENT PANEL

1. Side ventilator (P.4-13)

2. Headlight, fog light* and turn signal switch
(P.2-31)

3. Steering-wheel-mounted controls (left side)*
— Audio control* (P.4-54)
— Bluetooth
(P.4-57)

®

Hands-Free Phone System control*

SSI0763

4. Steering wheel
— Horn (P.2-37)
— Driver supplemental air bag (P.1-37)
— Electric power steering system (P.5-26)

5. Meters and gauges (P.2-3)

6. Steering-wheel-mounted controls (right side)
— Cruise control switches (P.5-18)

7. Wiper and washer switch (P.2-29)

8. Center ventilator (P.4-13)

9. Hazard warning flasher switch (P.2-36)

10. Audio system (P.4-20)/Navigation system**
— Clock (P.2-39)
— Rear view monitor* (P.4-9)

11. Front passenger supplemental air bag (P.1-37)

12. Outside remote mirror control switch (P.3-29)

13. Headlight aiming control* (P.2-34)

14. All-Wheel Drive (AWD) LOCK switch* (P.5-22)

15. Fuse box cover (P.8-20)

16. Vehicle Dynamic Control (VDC) OFF switch
(P.2-38, 5-28)

17. Hood release handle (P.3-21)

18. Tilting steering wheel lever (P.3-26)

19. Parking brake (P.5-17)

20. Ignition switch (P.5-9)

21. Heated seat switch* (P.2-37)

22. Power outlet (P.2-40)

23. Heater/air conditioner control (P.4-13)

24. Selector lever (P.5-13)

25. Front passenger air bag status light (P.1-44)

26. Rear window and outside mirror* defroster switch
(P.2-31)

27. Glove box (P.2-43)

*: if so equipped
**: See a separate Navigation System Owner’s

Manual (if so equipped)

Illustrated table of contents 0-7

METERS AND GAUGES

SIC4507

1. Tachometer (P.2-4)

2. Vehicle information display (P.2-18)

3. Speedometer (P.2-3)

4. Warning/indicator lights (P.2-10)

5. Engine coolant temperature gauge (P.2-5)

6.

switch (twin trip odometer control and

brightness control) (P.2-4, P.2-6)

0-8 Illustrated table of contents

7.

8. Fuel gauge (P.2-5)

switch (settings control and trip computer

control) (P.2-18)

*: if so equipped

ENGINE COMPARTMENT

SDI2127

QR25DE ENGINE

1. Engine oil filler cap (P.8-9)

2. Brake fluid reservoir (P.8-11)

3. Air cleaner (P.8-16)

4. Engine coolant reservoir (P.8-8)

5. Window washer fluid reservoir (P.8-12)

6. Engine drive belt location (P.8-15)

7. Engine oil dipstick (P.8-9)

8. Radiator filler cap (P.8-7)
— Vehicle overheat (P.6-11)

9. Battery (P.8-13)
— Jump starting (P.6-9)

10. Fuse/fusible link holder (P.8-19)

Illustrated table of contents 0-9

WARNING AND INDICATOR LIGHTS

Warning

light

All-Wheel Drive (AWD) warning
light (AWD models)*

Anti-lock Braking System
(ABS) warning light

Brake warning light 2-11

Charge warning light 2-12

Electric power steering warning
light

Engine oil pressure warning
light

Low fuel warning light 2-12

Low tire pressure warning light 2-13

Master warning light 2-14

Seat belt warning light 2-14

Name Page

0-10 Illustrated table of contents

2-10

2-11

2-12

2-12

Warning

light

Indicator

light

Name Page

Supplemental air bag warning
light

Name Page

All-Wheel Drive (AWD) LOCK
indicator light (AWD models)*

Front passenger air bag status
light

High beam indicator light 2-15

Malfunction Indicator Light
(MIL)

Overdrive off indicator light 2-16

Security indicator light 2-16

Slip indicator light 2-16

Small light indicator lights 2-16

Turn signal/hazard indicator
lights

Vehicle Dynamic Control (VDC)
off indicator light

2-14

2-15

2-15

2-15

2-16

2-17

*: if so equipped

1 Safety — Seats, seat belts and supple-

mental restraint system

Seats .............................................................. 1-2

Front seats ................................................... 1-3

Rear seats.................................................... 1-6

Head restraints .............................................. 1-7

Seat belts ...................................................... 1-10

Precautions on seat belt usage ....................... 1-10

Pregnant women.......................................... 1-13

Injured persons............................................ 1-13

Three-point type seat belt .............................. 1-13

Seat belt extenders....................................... 1-19

Seat belt maintenance ................................... 1-19

Child safety .................................................... 1-19

Infants ....................................................... 1-20

Small children ............................................. 1-20

Larger children ............................................ 1-20

Child restraints ................................................ 1-21

Precautions on child restraints......................... 1-21

Lower Anchors and Tethers for CHildren System

(LATCH) .................................................... 1-22

Rear-facing child restraint installation using

LATCH ...................................................... 1-24

Rear-facing child restraint installation using the

seat belts ................................................... 1-26

Forward-facing child restraint installation using

LATCH ...................................................... 1-29

Forward-facing child restraint installation using

the seat belts .............................................. 1-31

Installing top tether strap ............................... 1-34

Booster seats.............................................. 1-34

Supplemental restraint system ............................. 1-37

Precautions on supplemental restraint system ..... 1-37

NISSAN Advanced Air Bag System

(front seats) ................................................ 1-43

Front seat-mounted side-impact supplemental
air bag and roof-mounted curtain side-impact

and rollover supplemental air bag systems ......... 1-47

Seat belts with pretensioners (front seats) ......... 1-49

Supplemental air bag warning labels ................. 1-50

Supplemental air bag warning light ................... 1-50

Repair and replacement procedure................... 1-51

SEATS

WARNING

. Do not ride in a moving vehicle

when the seatback is reclined. This
can be dangerous. The shoulder belt
will not be against your body. In an
accident, you could be thrown into it
and receive neck or other serious
injuries. You could also slide under
the lap belt and receive serious
internal injuries.

. For the most effective protection

when the vehicle is in motion, the
seat should be upright. Always sit

1-2 Safety — Seats, seat belts and supplemental restraint system

well back in the seat with both feet
on the floor and adjust the seat
properly. See “PRECAUTIONS ON
SEAT BELT USAGE” later in this
section.

. After adjustment, gently rock in the

seat to make sure it is securely
locked.

. Do not leave children unattended

inside the vehicle. They could un­knowingly activate switches or con­trols. Unattended children could
become involved in serious acci­dents.

SSS0133

. The seatback should not be reclined

any more than needed for comfort.
Seat belts are most effective when
the passenger sits well back and
straight up in the seat. If the seat­back is reclined, the risk of sliding
under the lap belt and being injured
is increased.

CAUTION

When adjusting the seat positions, be
sure not to contact any moving parts to
avoid possible injuries and/or da­mages.

SSS0792

SSS0793

FRONT SEATS
Front manual seat adjustment

Forward and backward:

1

Pull the lever
the seat forward or backward to the desired
position. Release the lever to lock the seat in
position.

Reclining:

To recline the seatback, pull the lever
lean back. To bring the seatback forward, pull
the lever up and lean your body forward. Release
the lever to lock the seatback in position.

up and hold it while you slide

*

*

2

up and

The reclining feature allows adjustment of the
seatback for occupants of different sizes for
added comfort and to help obtain proper seat
belt fit. (See “PRECAUTIONS ON SEAT BELT
USAGE” later in this section.) Also, the seatback
can be reclined to allow occupants to rest when
the vehicle is stopped and the transmission in
the P (Park) position with the parking brake fully
applied.

Safety — Seats, seat belts and supplemental restraint system 1-3

Seat lifter (if so equipped):

Pull up or push down the adjusting lever to
adjust the seat height until the desired position
is achieved.

Front power seat adjustment

Operating tips:

. The seat motor has an auto-reset overload

protection circuit. If the motor stops during
operation, wait for a while, then reactivate
the switch.

. Do not operate the power seat for a long

period of time when the engine is off. This
will discharge the battery.

SSS1051

Forward and backward:

Moving the switch
slide the seat forward or backward to the
desired position.

Reclining:

Move the recline switch
desired angle is obtained. To bring the seatback
forward again, move the switch

The reclining feature allows adjustment of the
seatback for occupants of different sizes for
added comfort and to help obtain proper seat
belt fit. (See “PRECAUTIONS ON SEAT BELT
USAGE” later in this section.) Also, the seatback
can be reclined to allow occupants to rest when

1-4 Safety — Seats, seat belts and supplemental restraint system

1

forward or backward will

*

2

backward until the

*

2

forward.

*

the vehicle is stopped and the transmission in
the P (Park) position with the parking brake fully
applied.

SSS1052

Seat lifter (if so equipped):

Pull up or push down the adjusting switch to
adjust the height of the seat.

SSS1053

Lumbar support (if so equipped):

The lumbar support feature provides lower back
support to the driver.

1

Push the front
to adjust the seat lumbar area.

*

or back

2

end of the switch

*

Safety — Seats, seat belts and supplemental restraint system 1-5

SSS0796

Folding front passenger’s seat (if so
equipped)

The front passenger’s seatback can be folded
down. Some long objects may be loaded in the
vehicle when the rear seats are also folded
down. (See “REAR SEATS” later in this section
for folding rear seats.)

To fold the front passenger’s seatback, pull the
reclining lever all the way

When returning the front passenger’s seatback
to a seating position, lift it up to an upright
position. Pull the reclining lever and lean the
seatback to a proper seating position. (See
“Front manual seat adjustment” earlier in this
section.)

*

1

.

WARNING

. If you fold the front passenger’s

seatback down to carry longer ob­jects, be sure this cargo is properly
secured and not near an air bag. In a
crash, an inflating air bag might
force that object toward a person.
This could cause severe injury or
even death. Secure objects away
from the area in which an air bag
would inflate. See “PRECAUTIONS
ON SUPPLEMENTAL RESTRAINT
SYSTEM” later in this section.

. Never allow anyone to ride in the

cargo area or on the front passen­ger’s seat when it is in the fold­down position. Use of these areas
by passengers could result in ser­ious injury in an accident or sudden
stop.

1-6 Safety — Seats, seat belts and supplemental restraint system

REAR SEATS
Folding

Before folding the rear seats:

. Secure the seat belts on the seat belt hooks

on the side wall. (See “Seat belt hooks” later
in this section.)

. Release the connector tongue of the rear

center seat belt from the buckle, and store
the connector and seat belt tongues into the
retractor base on the ceiling. (See “Rear
center seat belt” later in this section.)

To fold down the seatback of each rear seat, pull
the adjusting knob

A

*

To return the seatback to the seating position, lift
up each seatback and push it to the upright
position until it is latched.

WARNING

. Do not use the rear seat belts when

the buckles are stowed in the seat
pockets. Failure to do so may re­duce the effectiveness of the entire
restraint system and increase the
chance or severity of injury in an
accident.

SSS0797

.

. Do not fold down the rear seats

when occupants are in the rear seat
area or any objects are on the rear
seats.

. Never allow anyone to ride in the

cargo area or on the rear seats
when they are in the fold-down
position. Use of these areas by
passengers without proper re­straints could result in serious injury
in an accident or sudden stop.

. Properly secure all cargo with ropes

or straps to help prevent it from
sliding or shifting. Do not place
cargo higher than the seatbacks. In
a sudden stop or collision, unse-

cured cargo could cause personal
injury.

. When returning the seatbacks to the

upright position, be certain they are
completely secured in the latched
position. If they are not completely
secured, passengers may be injured
in an accident or sudden stop.

HEAD RESTRAINTS

WARNING

Head restraints supplement the other
vehicle safety systems. They may pro­vide additional protection against injury
in certain rear end collisions. Adjust the
head restraints properly, as specified in
this section. Check the adjustment after
someone else uses the seat. Do not
attach anything to the head restraint
stalks or remove the head restraint. Do
not use the seat if the head restraint
has been removed. If the head restraint
was removed, install and properly ad­just the head restraint before an occu­pant uses the seating position. Failure
to follow these instructions can reduce
the effectiveness of the head restraints.
This may increase the risk of serious
injury or death in a collision.

SSS1019

The illustration shows the seating positions
equipped with head restraints. The head re­straints are adjustable.

Indicates the seating position is equipped

with a head restraint.

Safety — Seats, seat belts and supplemental restraint system 1-7

SSS0992

Components

1. Head restraint

2. Adjustment notches

Adjustment

Adjust the head restraint so the center is level
with the center of your ears.

3. Lock knob

4. Stalks

1-8 Safety — Seats, seat belts and supplemental restraint system

SSS0997

SSS0993

To raise the head restraint, pull it up.

SSS0994

To lower, push and hold the lock knob and push
the head restraint down.

SSS0995

Removal

Use the following procedure to remove the
adjustable head restraints.

1. Pull the head restraint up to the highest
position.

2. Push and hold the lock knob.

3. Remove the head restraint from the seat.

4. Store the head restraint properly in a secure
place so it is not loose in the vehicle.

5. Install and properly adjust the head restraint
before an occupant uses the seating posi­tion.

Safety — Seats, seat belts and supplemental restraint system 1-9

SSS0996

Install

1. Align the head restraint stalks with the holes
in the seat. Make sure that the head restraint
is facing the correct direction. The stalk with
the adjustment notches
stalled in the hole with the lock knob

2. Push and hold the lock knob and push the
head restraint down.

3. Properly adjust the head restraint before an
occupant uses the seating position.

1

must be in-

*

*

2

.

SEAT BELTS

SSS0508

Front-seat Active Head Restraints

The Active Head Restraint moves forward
utilizing the force that the seatback receives
from the occupant in a rear-end collision. The
movement of the head restraint helps support
the occupant’s head by reducing its backward
movement and helping absorb some of the
forces that may lead to whiplash-type injuries.

Active Head Restraints are effective for colli­sions at low to medium speeds in which it is said
that whiplash injury occurs most.

Active Head Restraints operate only in certain
rear-end collisions. After the collision, the head
restraints return to their original position.

Adjust the Active Head Restraints properly as
described earlier in this section.

PRECAUTIONS ON SEAT BELT
USAGE

If you are wearing your seat belt properly
adjusted, and you are sitting upright and well
back in your seat with both feet on the floor, your
chances of being injured or killed in an accident
and/or the severity of injury may be greatly
reduced. NISSAN strongly encourages you and
all of your passengers to buckle up every time
you drive, even if your seating position includes a
supplemental air bag.

Most U.S. states and Canadian provinces
or territories specify that seat belts be
worn at all times when a vehicle is being
driven.

1-10 Safety — Seats, seat belts and supplemental restraint system

SSS0136

SSS0016

SSS0134

SSS0014

Safety — Seats, seat belts and supplemental restraint system 1-11

WARNING

. Every person who drives or rides in

this vehicle should use a seat belt at
all times. Children should be prop­erly restrained in the rear seat and,
if appropriate, in a child restraint.

. The seat belt should be properly

adjusted to a snug fit. Failure to do
so may reduce the effectiveness of
the entire restraint system and in­crease the chance or severity of
injury in an accident. Serious injury
or death can occur if the seat belt is
not worn properly.

. Always route the shoulder belt over

your shoulder and across your
chest. Never put the belt behind
your back, under your arm or across
your neck. The belt should be away
from your face and neck, but not
falling off your shoulder.

. Position the lap belt as low and

snug as possible AROUND THE
HIPS, NOT THE WAIST. A lap belt
worn too high could increase the
risk of internal injuries in an acci­dent.

. Be sure the seat belt tongue is

securely fastened to the proper
buckle.

. Do not wear the seat belt inside out

or twisted. Doing so may reduce its
effectiveness.

. Do not allow more than one person

to use the same seat belt.

. Never carry more people in the

vehicle than there are seat belts.

. If the seat belt warning light glows

continuously while the ignition is
turned ON with all doors closed and
all seat belts fastened, it may in­dicate a malfunction in the system.
Have the system checked by a
NISSAN dealer.

. No changes should be made to the

seat belt system. For example, do
not modify the seat belt, add mate­rial, or install devices that may
change the seat belt routing or
tension. Doing so may affect the
operation of the seat belt system.
Modifying or tampering with the
seat belt system may result in
serious personal injury.

. Once a seat belt with pretensioner

1-12 Safety — Seats, seat belts and supplemental restraint system

has activated, it cannot be reused
and must be replaced together with
the retractor. See a NISSAN dealer.

. Removal and installation of the

pretensioner system components
should be done by a NISSAN dealer.

. All seat belt assemblies, including

retractors and attaching hardware,
should be inspected after any colli­sion by a NISSAN dealer. NISSAN
recommends that all seat belt as­semblies in use during a collision be
replaced unless the collision was
minor and the belts show no da­mage and continue to operate prop­erly. Seat belt assemblies not in use
during a collision should also be
inspected and replaced if either
damage or improper operation is
noted.

. All child restraints and attaching

hardware should be inspected after
any collision. Always follow the
restraint manufacturer’s inspection
instructions and replacement re­commendations. The child restraints
should be replaced if they are
damaged.

PREGNANT WOMEN

NISSAN recommends that pregnant women use
seat belts. The seat belt should be worn snug,
and always position the lap belt as low as
possible around the hips, not the waist. Place
the shoulder belt over your shoulder and across
your chest. Never put the lap/shoulder belt over
your abdominal area. Contact your doctor for
specific recommendations.

INJURED PERSONS

NISSAN recommends that injured persons use
seat belts, depending on the injury. Check with
your doctor for specific recommendations.

THREE-POINT TYPE SEAT BELT

WARNING

. Every person who drives or rides in

this vehicle should use a seat belt at
all times.

. Do not ride in a moving vehicle

when the seatback is reclined. This
can be dangerous. The shoulder belt
will not be against your body. In an
accident, you could be thrown into it
and receive neck or other serious
injuries. You could also slide under
the lap belt and receive serious

internal injuries.

. For the most effective protection

when the vehicle is in motion, the
seat should be upright. Always sit
well back in the seat with both feet
on the floor and adjust the seat belt
properly.

Fastening the seat belts

1. Adjust the seat. (See “SEATS” earlier in this
section.)

SSS0292

2. Slowly pull the seat belt out of the retractor
and insert the tongue into the buckle until
you hear and feel the latch engage.

. The retractor is designed to lock

during a sudden stop or on impact.
A slow pulling motion permits the
belt to move and allows you some
freedom of movement in the seat.

. If the seat belt cannot be pulled

from its fully retracted position,
firmly pull the belt and release it.
Then smoothly pull the belt out of
the retractor.

Safety — Seats, seat belts and supplemental restraint system 1-13

allow the driver and passengers some freedom
of movement in the seat. The ELR locks the seat
belt when the vehicle slows down rapidly or
during certain impacts.

The Automatic Locking Retractor (ALR) mode
(child restraint mode) locks the seat belt for
child restraint installation.

When ALR mode is activated the seat belt
cannot be extended again until the seat belt
tongue is detached from the buckle and fully
retracted. The seat belt returns to the ELR mode
after the seat belt fully retracts. For additional
information, see “CHILD RESTRAINTS” later in

SSS0290

3. Position the lap belt portion low and snug
on the hips as shown.

4. Pull the shoulder belt portion toward the
retractor to take up extra slack. Be sure the
shoulder belt is routed over your shoulder
and across your chest.

The front passenger seat and the rear seating
positions three-point seat belts have two modes
of operation:

. Emergency Locking Retractor (ELR)

. Automatic Locking Retractor (ALR)

The Emergency Locking Retractor (ELR) mode
allows the seat belt to extend and retract to

this section.

The ALR mode should be used only for
child restraint installation. During normal
seat belt use by an occupant, the ALR
mode should not be activated. If it is
activated, it may cause uncomfortable seat
belt tension.

When fastening the seat belts, be
certain that seatbacks are completely
secured in the latched position. If they
are not completely secured, passengers
may be injured in an accident or sudden
stop.

1-14 Safety — Seats, seat belts and supplemental restraint system

WARNING

SSS0326

Unfastening the seat belts

To unfasten the seat belt, push the button on the
buckle. The seat belt automatically retracts.

Checking seat belt operation

Seat belt retractors are designed to lock seat
belt movement by two separate methods:

. When the belt is pulled quickly from the

retractor.

. When the vehicle slows down rapidly.

Check the operation as follows:

. Grasp the shoulder belt and pull forward

quickly. The retractor should lock and
restrict further belt movement.

If the retractor does not lock during this check or
if you have an y question about seat belt
operation, see a NISSAN dealer.

SSS0351A

Shoulder belt height adjustment

The sho ulder belt anchor height should be
adjusted to the position best for you. (See
“PRECAUTIONS ON SEAT BELT USAGE”
earlier in this section.)

1

To adjust, pull the adjustment button
then move the shoulder belt anchor to the
desired position
over the center of the shoulder. The belt should
be away from your face and neck, but not falling
off of your shoulder. Release the adjustment
button to lock the shoulder belt anchor into
position.

2

, so that the belt passes

*

*

, and

WARNING

. After adjustment, release the ad-

justment button and try to move the
shoulder belt anchor up and down
to make sure it is securely fixed in
position.

. The shoulder belt anchor height

should be adjusted to the position
best for you. Failure to do so may
reduce the effectiveness of the
entire restraint system and increase
the chance or severity of injury in an
accident.

Safety — Seats, seat belts and supplemental restraint system 1-15

SSS0798

Seat belt hooks

When the rear seat belts are not in use and
when folding down the rear seats, hook the rear
outer seat belts on the seat belt hooks.

Rear center seat belt

The rear center seat belt has a connector tongue

1

and a seat belt tongue

*

connector tongue and the seat belt tongue must
be securely latched for proper seat belt opera­tion.

1-16 Safety — Seats, seat belts and supplemental restraint system

2

. Both the

*

SSS0391

SSS0241

WARNING

. Always fasten the connector tongue

and the seat belt in the order shown.

. Always make sure both the connec-

tor tongue and the seat belt tongue
are secured when using the seat
belt or installing a child restraint. Do
notusetheseatbeltorchild
restraint with only the seat belt
tongue attached. This could result
in serious personal injury in case of
an accident or a sudden stop.

SSS0703

The center seat belt buckle and the tongue are
identified by the CENTER mark. The center seat
belt tongue can be fastened only into the center
seat belt buckle.

Stowing rear center seat belt:

When folding down the rear seat, the rear center
seat belt can be retracted into a stowed position
as follows:

1

1. Hold the connector tongue
seat belt does not retract suddenly when the
tongue is released from the connector
buckle. Release the connector tongue by
inserting a suitable tool such as key
the connector buckle.

2. Insert the seat belt tongue into the retractor
base first

3. Then secure the connector tongue into the
retractor base

*

2

.

3

.

*

*

so that the

A

into

*

WARNING

. Do not unfasten the rear center seat

belt connector except when folding
down the rear seat.

. When attaching the rear center seat

belt connector, be certain that the
seatbacks are completely secured in
the latched position and the rear
center seat belt connector is com­pletely secured.

SSS0799

Safety — Seats, seat belts and supplemental restraint system 1-17

. If the rear center seat belt connector

and the seatbacks are not secured

in the correct position, serious per­sonal injury may result in an acci­dent or sudden stop.

1-18 Safety — Seats, seat belts and supplemental restraint system

SSS0800

Attaching rear center seat belt:

Always be sure the rear center seat belt
connector tongue and connector buckle are
attached. Disconnect only when folding down
the rear seat.

To connect the buckle:

1. Pull out the connector tongue from the
retractor base

2. Pull out the seat belt tongue from the
retractor base

3. Pull the seat belt and secure the connector
buckle until it clicks

The center seat belt connector tongue can be
attached only into the rear center seat belt
connector buckle.

To fasten the seat belt, see “Fastening the seat
belts” earlier in this section.

1

*

2

*

.

.

3

.

*

WARNING

. Do not unfasten the rear center seat

belt connector except when folding
down the rear seat.

. When attaching the rear center seat

belt connector, be certain that the
seatbacks are completely secured in
the latched position and the rear

CHILD SAFETY

center seat belt connector is com­pletely secured.

. If the rear center seat belt connector

and the seatbacks are not secured
in the correct position, serious per­sonal injury may result in an acci­dent or sudden stop.

SEAT BELT EXTENDERS

If, because of body size or driving position, it is
not possible to properly fit the lap-shoulder belt
and fasten it, an extender that is compatible with
the installed seat belts is available that can be
purchased. The extender adds approximately 8
in (200 mm) of length and may be used for either
the driver or front passenger seating position.
See a NISSAN dealer for assistance with
purchasing an extender if an extender is
required.

WARNING

. Only NISSAN seat belt extenders,

made by the same company which
made the original equipment seat
belts, should be used with NISSAN
seat belts.

. Adults and children who can use the

standard seat belt should not use an

extender. Such unnecessary use
could r esult in ser ious personal
injury in the event of an accident.

. Never use seat belt extenders to

install child restraints. If the child
restraint is not secured properly, the
child could be seriously injured in a
collision or a sudden stop.

SEAT BELT MAINTENANCE

. To clean the seat belt webbing, apply a

mild soap solution or any solution recom­mended for cleaning upholstery or carpets.
Then wipe with a cloth and allow the seat
belts to dry in the shade. Do not allow the
seat belts to retract until they are completely
dry.

. If dirt builds up in the shoulder belt

guide of the seat belt anchors, the seat

belts may retract slowly. Wipe the shoulder
belt guide with a clean, dry cloth.

. Periodically check to see that the seat

belt and the metal components, such as

buckles, tongues, retractors, flexible wires
and anchors, work properly. If loose parts,
deterioration, cuts or other damage on the
webbing is found, t he entire seat belt
assembly should be replaced.

Safety — Seats, seat belts and supplemental restraint system 1-19

Children need adults to help protect them.

They need to be properly restrained.

In addition to the general information in this
manual, child safety information is available from
many other sources, including doctors, teachers,
government traffic safety offices, and community
organizations. Every child is different, so be sure
to learn the best way to transport your child.

There are three basic types of child restraint
systems:

. Rear-facing child restraint

. Forward-facing child restraint

. Booster seat

The proper restraint depends on the child’s size.
Generally, infants up to about 1 year and less
than 20 lbs (9 kg) should be placed in rear­facing child restraints. Forward-facing child
restraints are available for children who outgrow
rear-facing child restraints and are at least 1
year old. Booster seats are used to help position
a vehicle lap/shoulder belt on a child who can no
longer use a forward-facing child restraint.

WARNING

Infants and children need special pro­tection. The vehicle’s seat belts may not
fit them properly. The shoulder belt may

come too close to the face or neck. The
lap belt may not fit over their small hip
bones. In an accident, an improperly
fitting seat belt could cause serious or
fatal inju ry. Always use appropriate
child restraints.

All U.S. states and Canadian provinces or
territories require the use of approved child
restraints for infants and small children. See
“CHILD RESTRAINTS” later in this section.

A child restraint may be secured in the vehicle
by using either the LATCH (Lower Anchor and
Tethers for CHildren) system or with the vehicle
seat belt. See “CHILD RESTRAINTS” later in
this section for more information.

NISSAN recommends that all pre-teens
and children be restrained in the rear seat.
Studies show that children are safer when
properly restrained in the rear seat than in
the front seat.

This is especially important because your
vehicle has a supplemental restraint sys­tem (Air bag system) for the front passen­ger. See “SUPPLEMENTAL RESTRAINT
SYSTEM” later in this section.

INFANTS

Infants up to at least 1 year old should be placed
in a rear-facing child restraint. NISSAN recom-

mends that infants be placed in child restraints
that comply with Federal Motor Vehicle Safety
Standards or Canadian Motor Vehicle Safety
Standards. You should choose a child restraint
that fits your vehicle and always follow the
manufacturer’s instructions for installation and
use.

SMALL CHILDREN

Children that are over one year old and weigh at
least 20 lbs (9 kg) can be placed in a forward­facing child restraint. Refer to the manufacturer’s
instructions for minimum and maximum weight
and height recommendations. NISSAN recom­mends that small children be placed in child
restraints that comply with Federal Motor
Vehicle Safety Standards or Canadian Motor
Vehicle Safety Standards. You should choose a
child restraint that fits your vehicle and always
follow the manufacturer’s instructions for instal­lation and use.

LARGER CHILDREN

Children who are too large for child restraints
should be seated and restrained by the seat
belts which are provided. The seat belt may not
fit properly if the child is less than 4 ft 9 in (142.5
cm) tall and weighs between 40 lbs (18 kg) and
80 lbs (36 kg). A booster seat should be used to
obtain proper seat belt fit.

NISSAN recommends that a child be placed in a

1-20 Safety — Seats, seat belts and supplemental restraint system

commercially availableboosterseatifthe
shoulder belt fits close to the face or neck or if
the lap portion of the seat belt goes across the
abdomen. The booster seat should raise the
child so that the shoulder belt is properly
positioned across the top, middle portion of
the shoulder and the lap belt is low on the hips.
A booster seat can only be used in seating
positions that have a three-point type seat belt.
The booster seat should fit the vehicle seat and
have a label certifying that it complies with
Federal M otor Vehicle Safety Standards or
Canadian Motor Vehicle Safety Standards.
Once the child has grown so the shoulder belt
is no longer on or near the face and neck, use
the shoulder belt without the booster seat.

WARNING

Never let a child stand or kneel on any
seat and do not allow a child in the
cargo area. The child could be seriously
injured or killed in a sudden stop or
collision.

CHILD RESTRAINTS

SSS0099

SSS0100

PRECAUTIONS ON CHILD
RESTRAINTS

WARNING

. Failure to follow the warnings and

instructions for proper use and in­stallation of child restraints could
result in serious injury or death of a
child or other passengers in a
sudden stop or collision:

— The child restraint must be used

and installed properly. Always
follow all of the child restraint
manufacturer’s instructions for
installation and use.

— Infants and children should

never be held on anyone’s lap.
Even the strongest adult cannot
resist the forces of a collision.

— Do not put a seat belt around

both a child and another pas­senger.

— NISSAN recommends that all

child restraints be installed in
the rear seat. Studies show that
children are safer when properly
restrained in the rear seat than
in the front seat. If you must

Safety — Seats, seat belts and supplemental restraint system 1-21

install a forward-facing child
restraint in the front seat, see
“FORWARD-FACING CHILD RE­STRAINT INSTALLATION USING
THE SEAT BELTS” later in this
section.

— Even with the NISSAN Advanced

Air Bag System, never install a
rear-facing child restraint in the
front seat. An inflating air bag
could seriously injure or kill a
child. A rear-facing child re­straint must only be used in the
rear seat.

—Besuretopurchaseachild

restraint that will fit the child
and vehicle. Some child re­straints may not fit properly in
your vehicle.

— Child restraint anchor points are

designed to withstand loads
from child restraints that are
properly fitted.

— Never use the anchor points for

adult seat belts or harnesses.

— A child restraint with a top tether

strap should not be used in the
front passenger seat.

— Keep seatbacks as upright as

possible after fitting the child
restraint.

— Infants and children should al-

ways be placed in an appropri­ate child restraint while in the
vehicle.

. When the child restraint is not in

use, keep it secured with the LATCH
system or a seat belt. In a sudden
stop or collision, loose objects can
injure occupants or damage the
vehicle.

CAUTION

A child restraint in a closed vehicle can
become very hot. Check the seating
surface and buckles before placing a
child in the child restraint.

This vehicle is equipped with a universal child
restraint anchor system, referred to as the
LATCH (Lower Anchors and Tethers for CHil­dren) system. Some child restraints include rigid
or webbing-mounted attachments that can be
connected to these anchors.

For details, see “Lower Anchors and Tethers for
CHildren System (LATCH)” later in this section.

If you do not have a LATCH compatible child
restraint, the vehicle seat belts can be used.

Several manufacturers offer child restraints for
infants and small children of various sizes. When
selecting any child restraint, keep the following
points in mind:

. Choose only a restraint with a label certifying

that it complies with Federal Motor Vehicle
Safety Standard 213 or Canadian Motor
Vehicle Safety Standard 213.

. Check the child restraint in your vehicle to

be sure it is compatible with the vehicle’s
seat and seat belt system.

. If the child restraint is compatible with your

vehicle, place your child in the child restraint
and check the various adjustments to be
sure the child restraint is compatible with
your child. Choose a child restraint that is
designed for your child’s height and weight.
Always follow all recommended procedures.

All U.S. states and Canadian provinces or
territories require that infants and small
children be restrained in an approved child
restraint at all times while the vehicle is
being operated. Canadian law requires the
top tether strap on forward-facing child
restraints be secured to the designated
anchor point on the vehicle.

LATCH label location

SSS0801

Lower Anchors and Tethers for CHildren
System (LATCH)

Your vehicle is equipped with special anchor
points that are used with the LATCH (Lower
Anchors and Tethers for CHildren) system
compatible child restraints. This system may
also be referred to as the ISOFIX or ISOFIX
compatible system. With this system, you do not
have to use a vehicle seat belt to secure the
child restraint.

1-22 Safety — Seats, seat belts and supplemental restraint system

LATCH lower anchor

WARNING

Failure to follow the warnings and
instructions for proper use and installa­tion of child restraints could result in
serious injury or death of a child or
other passengers in a sudden stop or
collision:

— Attach LATCH system compatible

child restraints only at the locations
shown in the illustration.

— Do not secure a child restraint in the

center rear seating position using
the LATCH lower anchors. The child
restraint will not be secured prop­erly.

— Inspect the lower anchors by insert-

ing your fingers into the lower
anchor area. Feel to make sure
there are no obstructions over the
anchors such as seat belt webbing
or seat cushion material. The child
restraint will not be secured prop­erly if the lower anchors are ob­structed.

LATCH lower anchor location

SSS0637

LATCH lower anchor location

The LATCH anchors are located at the rear of
the seat cushion near the seatback. A label is
attached to the seatback to help you locate the
LATCH anchors.

LATCH webbing-mounted attachment

SSS0643

Installing child restraint LATCH lower
anchor attachments

LATCH compatible child restraints include two
rigid or webbing-mounted attachments that can
be connected to anchors located at certain
seating positions in your vehicle. With this
system, you do not have to use a vehicle seat
belt to secure the child restraint. Check your
child restraint for a label stating that it is
compatible with LATCH. This information may
also be in the instructions provided by the child
restraint manufacturer.

Safety — Seats, seat belts and supplemental restraint system 1-23

REAR-FACING CHILD RESTRAINT IN­STALLATION USING LATCH

Refer to all Warnings and Cautions in the “Child
safety” and “Child restraints” sections before
installing a child restraint.

Follow these steps to install a rear-facing child
restraint using the LATCH system:

1. Position the child restraint on the seat.
Always follow the child restraint manufac­turer’s instructions.

When installing a child restraint, carefully read

LATCH rigid attachment

and follow the instructions in this manual and
those supplied with the child restraint.

SSS0644

Top tether anchor point locations

Anchor points are located on the floor behind
the outboard and center seating positions.

The child restraint top tether strap must be used
when installing child restraints with the LATCH
lower anchor attachments or seat belts.

If you have any questions when installing a
top tether strap child restraint on the rear
seat, consult a NISSAN dealer for details.

1-24 Safety — Seats, seat belts and supplemental restraint system

SSS0802

Rear-facing web-mounted — step 2

SSS0648

2. Secure the child restraint anchor attach­ments to the LATCH lower anchors. Check
to make sure the LATCH attachment is
properly attached to the lower anchors.

Rear-facing rigid-mounted — step 2

Safety — Seats, seat belts and supplemental restraint system 1-25

SSS0649

Rear-facing — step 3

SSS0639

3. For child restraints that are equipped with
webbing-mounted attachments, remove any
additional slack from the anchor attach­ments. Press downward and rearward firmly
in the center of the child restraint with your
hand to compress the vehicle seat cushion
and seatback while tightening the webbing
of the anchor attachments.

properly secured prior to each use. If the
child restraint is loose, repeat steps 1
through 4.

4. After attaching the child restraint, test it

Rear-facing — step 4

before you place the child in it. Push it from
side to side while holding the child restraint
near the LATCH attachment path. The child
restraint should not move more than 1 inch
(25 mm), from side to side. Try to tug it
forward and check to see if the LATCH
attachment holds the restraint in place. If the
restraint is not secure, tighten the LATCH
attachment as necessary, or put the restraint
in another seat and test it again. You may
need to try a different child restraint or try
installing by using the vehicle seat belt (if
applicable). Not all child restraints fit in all
types of vehicles.

5. Check to make sure the child restraint is

SSS0650

1-26 Safety — Seats, seat belts and supplemental restraint system

SSS0100

REAR-FACING CHILD RESTRAINT IN­STALLATION USING THE SEAT BELTS

WARNING

The three-point seat belt with Auto­matic Locking Retractor (ALR) must be
used when installing a child restraint.
Failure to use the ALR mode will result
in the child restraint not being properly
secured. The restraint could tip over or
be loose and cause injury to a child in a
sudden stop or collision. Also, it can
change the operation of the front
passenger air bag. See “Front passen-

ger air bag and status light” later in this
section.

Rear-facing — step 1

SSS0100

Refer to all Warnings and Cautions in the
“CHILD SAFETY” earlier in this section and
“CHILD RESTRAINTS” earlier in this section
before installing a child restraint.

Follow these steps to install a rear-facing child
restraint using the vehicle seat belts in the rear
seats:

1. Child restraints for infants must be

used in the rear-facing direction and
therefore must not be used in the front
seat. Position the child restraint on the seat.

Always follow the restraint manufacturer’s
instructions.

Safety — Seats, seat belts and supplemental restraint system 1-27

Rear-facing — step 2

SSS0654

2. Route the seat belt tongue through the child
restraint and insert it into the buckle until you
hear and feel the latch engage. Be sure to
follow the child restraint manufacturer’s
instructions for belt routing.

3. Pull the shoulder belt until the belt is fully

Rear-facing — step 3

extended. At this time, the seat belt retractor

SSS0655

4. Allow the seat belt to retract. Pull up on the

Rear-facing — step 4

shoulder belt to remove any slack in the belt.
is in the Automatic Locking Retractor (ALR)
mode (child restraint mode). It reverts to the
Emergency Locking Retractor (ELR) mode
when the seat belt is fully retracted.

1-28 Safety — Seats, seat belts and supplemental restraint system

SSS0656

Rear-facing — step 5

SSS0657

5. Remove any additional slack from the seat
belt; press downward and rearward firmly in
the center of the child restraint to compress
the vehicle seat cushion and seatback while
pulling up on the seat belt.

Rear-facing — step 6

SSS0658

6. After attaching the child restraint, test it
before you place the child in it. Push it from
side to side while holding the child restraint
near the seat belt path. The child restraint
should not move more than 1 inch (25 mm),
from side to side. Try to tug it forward and
check to see if the belt holds the restraint in
place. If the restraint is not secure, tighten
the seat belt as necessary, or put the
restraint in another seat and test it again.
You may need to try a different child
restraint. Not all child restraints fit in all
types of vehicles.

7. Check to make sure that the child restraint is
properly secured prior to each use. If the
seat belt is not locked, repeat steps 1

through 6.

After the child restraint is removed and the seat
belt fully retracted, the ALR mode (child restraint
mode) is canceled.

FORWARD-FACING CHILD RE­STRAINT INSTALLATION USING
LATCH

Refer to all Warnings and Cautions in the “Child
safety” and “Child restraints” sections before
installing a child restraint.

Follow these steps to install a forward-facing
child restraint using the LATCH system:

1. Position the child restraint on the seat.
Always follow the child restraint manufac­turer’s instructions.

Safety — Seats, seat belts and supplemental restraint system 1-29

Forward-facing web-mounted — step 2

SSS0645

2. Secure the child restraint anchor attach­ments to the LATCH lower anchors. Check
to make sure the LATCH attachment is
properly attached to the lower anchors.

If the child restraint is equipped with a top
tether strap, route the top tether strap and
secure the tether strap to the tether anchor
point. See “Installing top tether strap” in this
section. Do not install child restraints that
require the use of a top tether strap in
seating positions that do not have a top
tether anchor.

Forward-facing rigid-mounted — step 3

3. The back of the child restraint should be
secured against the vehicle seatback.

If the seating position does not have an
adjustable headrest and it is interfering with
the proper child restraint fit, try another
seating position or a different child restraint.

SSS0646

4. For child restraints that are equipped with

Forward-facing — step 4

webbing-mounted attachments, remove any
additional slack from the anchor attach­ments. Press downward and rearward firmly
in the center of the child restraint with your
knee to compress the vehicle seat cushion
and seatback while tightening the webbing
of the anchor attachments.

5. Tighten the tether strap according to the
manufacturer’s instructions to remove any
slack.

1-30 Safety — Seats, seat belts and supplemental restraint system

SSS0647

Forward-facing — step 6

SSS0638

6. After attaching the child restraint, test it
before you place the child in it. Push it from
side to side while holding the child restraint
near the LATCH attachment path. The child
restraint should not move more than 1 inch
(25 mm), from side to side. Try to tug it
forward and check to see if the LATCH
attachment holds the restraint in place. If the
restraint is not secure, tighten the LATCH
attachment as necessary, or put the restraint
in another seat and test it again. You may
need to try a different child restraint. Not all
child restraints fit in all types of vehicles.

7. Check to make sure the child restraint is
properly secured prior to each use. If the
child restraint is loose, repeat steps 1

through 6.

FORWARD-FACING CHILD RE­STRAINT INSTALLATION USING THE
SEAT BELTS

WARNING

. The three-point seat belt with Auto-

matic Locking Retractor (ALR) must
be used when installing a child
restraint. Failure to use the ALR
mode will result in the child re­straint not being properly secured.
The restraint could tip over or be
loose and cause injury to a child in a
sudden stop or collision. Also, it can
change the operation of the front
passenger air bag. See “Front pas­senger air bag and status light”
later in this section.

. When installing a child restraint

system in the rear center position,
both the center seat belt connector
tongue and buckle tongue must be
secured. See “Rear center seat belt”
earlier in this section.

Forward-facing (front passenger seat) — step 1

Refer to all Warnings and Cautions in the “Child
safety” and “Child restraints” sections before
installing a child restraint.

Follow these steps to install a forward-facing
child restraint using the vehicle seat belt in the
rear seats or in the front passenger seat:

1. If you must install a child restraint in

the front seat, it should be placed in a
forward-facing direction only. Move the
seat to the rearmost position. Child
restraints for infants must be used in
the rear-facing direction and, therefore,
must not be used in the front seat.

2. Position the child restraint on the seat.
Always follow the child restraint manufac-

Safety — Seats, seat belts and supplemental restraint system 1-31

SSS0640

turer’s instructions.

The back of the child restraint should be
secured against the vehicle seatback.

If necessary, adjust or remove the head
restraint to obtain the correct child restraint
fit. If the head restraint is removed, store it in
a secure place. Be sure to reinstall the

head restraint when the child restraint
is removed. See “HEAD RESTRAINTS”

earlier in this section for head restraint
adjustment, removal and installation informa­tion.

If the seating position does not have an
adjustable head restraint or headrest and it
is interfering with the proper child restraint
fit, try another seating position or a different
child restraint.

3. Route the seat belt tongue through the child

Forward-facing — step 3

restraint and insert it into the buckle until you
hear and feel the latch engage. Be sure to
follow the child restraint manufacturer’s
instructions for belt routing.

If the child restraint is equipped with a top

SSS0360B

4. Pull the shoulder belt until the belt is fully

Forward-facing — step 4

extended. At this time, the seat belt retractor
is in the Automatic Locking Retractor (ALR)
mode (child restraint mode). It reverts to
Emergency Locking Retractor (ELR) mode
when the seat belt is fully retracted.

tether strap, route the top tether strap and
secure the tether strap to the tether anchor
point (rear seat installation only). See “IN­STALLING TOP TETHER STRAP” later in
this section. Do not install child restraints
that require the use of a top tether strap in
seating positions that do not have a top
tether anchor.

1-32 Safety — Seats, seat belts and supplemental restraint system

SSS0651

Forward-facing — step 5

SSS0652

5. Allow the seat belt to retract. Pull up on the
shoulder belt to remove any slack in the belt.

through 8.

Forward-facing — step 6

SSS0653

6. Remove any additional slack from the seat
belt; press downward and rearward firmly in
the center of the child restraint with your
knee to compress the vehicle seat cushion
and seatback while pulling up on the seat
belt.

7. Tighten the tether strap according to the
manufacturer’s instructions to remove any
slack.

Forward-facing — step 8

SSS0641

8. After attaching the child restraint, test it
before you place the child in it. Push it from
side to side while holding the child restraint
near the seat belt path. The child restraint
should not move more than 1 inch (25 mm),
from side to side. Try to tug it forward and
check to see if the belt holds the restraint in
place. If the restraint is not secure, tighten
the seat belt as necessary, or put the
restraint in another seat and test it again.
You may need to try a different child
restraint. Not all child restraints fit in all
types of vehicles.

9. Check to make sure the child restraint is
properly secured prior to each use. If the
seat belt is not locked, repeat steps 2

Safety — Seats, seat belts and supplemental restraint system 1-33

10. If the child restraint is installed in the front
passenger seat, place the ignition switch in
the ON position. The front passenger air bag
status light
light is not illuminated, see “Front passenger
air bag and status light” in this section.

Move the child restraint to another
seating position. Have the system

checked by a NISSAN dealer.

After the child restraint is removed and the seat
belt is fully retracted, the ALR mode (child
restraint mode) is canceled.

Forward-facing — step 10

should illuminate. If this

SSS0803

SSS0802

INSTALLING TOP TETHER STRAP

First secure the child restraint with the LATCH
system (rear outboard seating positions only) or
the seat belt as applicable.

1. Remove the anchor cover from the anchor
point which is located directly behind the
child seat.

2. Position the top tether strap over the top of
the seatback.

3. Secure the tether strap to the tether anchor
bracket that provides the straightest instal­lation.

4. Tighten the tether strap according to the

manufacturer’s instructions to remove any
slack.

If you have any questions when installing a
top tether strap, consult your NISSAN
dealer for details.

BOOSTER SEATS
Precautions on booster seats

WARNING

If a booster seat and seat belt are not
used properly, the risk of a child being
injured in a sudden stop or collision
greatly increases:

— Make sure the shoulder portion of

the belt is away from the child’s face
and neck and the lap portion of the
belt does not cross the stomach.

— Make sure the shoulder belt is not

behind the child or under the child’s
arm.

— A booster seat must only be in-

stalled in a seating position that has
a lap/shoulder belt.

1-34 Safety — Seats, seat belts and supplemental restraint system

LRS0455

Booster seats of various sizes are offered by
several manufacturers. When selecting any
booster seat, keep the following points in mind:

. Choose only a booster seat with a label

certifying that it complies with Federal Motor
Vehicle Safety Standard 213 or Canadian
Motor Vehicle Safety Standard 213.

. Check the booster seat in your vehicle to be

sure it is compatible with the vehicle’s seat
and seat belt system.

LRS0453

. Make sure the child’s head will be properly

supported by the booster seat or vehicle
seat. The seatback must be at or above the
center of the child’s ears. For example, if a

1

low back booster seat

is chosen, the

*

vehicle seatback must be at or above the
center of the child’s ears. If the seatback is
lower than the center of the child’s ears, a

2

high back booster seat

should be used.

*

. If the booster seat is compatible with your

vehicle, place your child in the booster seat
and check the various adjustments to be
sure the booster seat is compatible with
your child. Always follow all recommended
procedures.

Safety — Seats, seat belts and supplemental restraint system 1-35

LRS0464

All U.S. states and Canadian provinces or
territories require that infants and small
children be restrained in an approved child
restraint at all times while the vehicle is
being operated.

The instructions in this section apply to booster
seat installation in the rear seats or the front
passenger seat.

Booster seat installation

CAUTION

Do not use the lap/shoulder belt Auto­matic Locking Retractor (ALR) mode
when using a booster seat with the
seat belts.

Refer to all Warnings and Cautions in the “Child
safety”, “Child restraints” and “Booster seats”
sections earlier in this section before installing a
child restraint.

Follow these steps to install a booster seat in the
rear seat or in the front passenger seat:

1-36 Safety — Seats, seat belts and supplemental restraint system

1. If you must install a booster seat in the

front seat, move the seat to the rear­most position.

2. Position the booster seat on the seat. Only
place it in a forward-facing direction. Always
follow the booster seat manufactu rer’s
instructions.

SSS0640

3. The booster seat should be positioned on

Front passenger position

the vehicle seat so that it is stable.

If necessary, adjust or remove the head
restraint to obtain the correct booster seat
fit. If the head restraint is removed, store it in
a secure place. Be sure to reinstall the

head restraint when the booster seat is
removed. See “HEAD RESTRAINTS” ear-

lier in this section for head restraint adjust­ment, removal and installation information.

If the seating position does not have an
adjustable head restraint or headrest and it
is interfering with the proper booster seat fit,
try another seating position or a different
booster seat.

LRS0454

SUPPLEMENTAL RESTRAINT
SYSTEM

4. Position the lap portion of the seat belt low
and snug on the child’s hips. Be sure to
follow the booster seat manufactu rer’s
instructions for adjusting the seat belt
routing.

5. Pull the shoulder belt portion of the seat belt
toward the retractor to take up extra slack.
Be sure the shoulder belt is positioned
across the top, middle portion of the child’s
shoulder. Be sure to follow the booster seat
manufacturer’s instructions for adjusting the
seat belt routing.

6. Follow the warnings, cautions and instruc­tions for properly fastening a seat belt
shownin“SEATBELTS”earlierinthis
section.

SSS0803

7. If the booster seat is installed in the front
passenger seat, turn the ignition switch to
the ON position. The front passenger air bag
status light
depending on the size of the child and the
type of booster seat used. See “Front
passenger air bag and status light” earlier
in this section.

may or may not illuminate

PRECAUTIONS ON SUPPLEMENTAL
RESTRAINT SYSTEM

This Supplemental Restraint System (SRS)
section contains important information concern­ing the following systems:

. Driver and passenger supplemental front-

impact air bag (NISSAN Advanced Air Bag
System)

. Front seat -mounted side-impact supple-

mental air bag

. Roof-mounted curtain side-impact and roll-

over supplemental air bag

. Seat belt with pretensioner

Supplemental front-impact air bag system:

The NISSAN Advanced Air Bag System can
help cushion the impact force to the head and
chest of the driver and front passenger in certain
frontal collisions.

Front seat-mounted side-impact supple­mental air bag system: This system can help

cushion the impact force to the chest and pelvis
areas of the driver and front passenger in certain
side impact collisions. The side air bags are
designed to inflate on the side where the vehicle
is impacted.

Roof-mounted curtain side-impact and
rollover supplemental air bag system: This

Safety — Seats, seat belts and supplemental restraint system 1-37

system can help cushion the impact force to the
head of occupants in front and rear outboard
seating positions in certain side impact or
rollover collisions. In a side impact, the curtain
and rollover air bags are designed to inflate on
the side where the vehicle is impacted. In a
rollover both curtain and rollover air bags are
designed to inflate and remain inflated for a
short period of time.

These supplemental restraint systems are de­signed to supplement the crash protection
provided by the driver and passenger seat belts
and are not a substitute for them. Seat belts
should always be correctly worn and the
occupant seated a suitable distance away from
the steering wheel, instrument panel and door
finishers. (See “SEAT BELTS” earlier in this
section for instructions and precautions on seat
belt usage.)

The supplemental air bags operate only
when the ignition switch is in the ON
position.

After turning the ignition switch to the ON
position, the supplemental air bag warning
light illuminates. The supplemental air bag
warning light will turn off after about 7
seconds if the systems are operational.

SSS0131

SSS0132

1-38 Safety — Seats, seat belts and supplemental restraint system

WARNING

. The front air bags ordinarily will not

inflate in the event of a side impact,
rear impact, rollover, or lower se­verity frontal collision. Always wear
your seat belts to help reduce the
risk or severity of injury in various
kinds of accidents.

. The front passenger air bag will not

inflate if the passen ger air bag
status light is lit or if the front
passenger seat is unoccupied. See
“Front passenger air bag and status
light” later in this section.

. The seat belts and the front air bags

are most effective when you are
sitting well back and upright in the
seat with both feet on the floor. The
front air bags inflate with great
force. Even with the NISSAN Ad­vanced Air Bag System, if you are
unrestrained, leaning forward, sit­ting sideways or out of position in
any way, you are at greater risk of
injury or death in a crash. You may
also receive serious or fatal injuries
from the front air bag if you are up
against it when it inflates. Always sit

back against the seatback and as
far-away as practical from the steer­ing wheel or instrument panel. Al­ways use the seat belts.

. The driver and front passenger seat

belt buckles are equipped with
sensors that detect if the seat belts
are fastened. The Advanced Air Bag
System monitors the severity of a
collision and seat belt usage then
inflates the air bags as needed.
Failure to properly wear seat belts
can increase the risk or severity of
injury in an accident.

. The front passenger seat is

equipped with an occupant classifi­cation sensor (pattern sensor) that
turns the front passenger air bag
OFF under some conditions. This
sensor is only used in this seat.
Failure to be properly seated and
wearing the seat belt can increase
the risk or severity of injury in an
accident. See “Front passenger air
bag and status light” later in this
section.

. Keep hands on the outside of the

steering wheel. Placing them inside
the steering wheel rim could in-

Safety — Seats, seat belts and supplemental restraint system 1-39

crease the risk that they are injured
if the front air bag inflates.

SSS0007

SSS0008

SSS0099

SSS0006

1-40 Safety — Seats, seat belts and supplemental restraint system

SSS0009

SSS0100

WARNING

. Never let children ride unrestrained

or extend their hands or face out of
the window. Do not attempt to hold
them in your lap or arms. Some
examples of dangerous riding posi­tions are shown in the illustrations.

. Children may be severely injured or

killed when the front air bags, side
air bags or curtain and rollover air
bags inflate if they are not properly
restrained. Pre-teens and children
should be properly restrained in the
rear seat, if possible.

. Even with the NISSAN Advanced Air

Bag System, never install a rear­facing child restraint in the front
seat. An inflating front air bag could
seriously injure or kill your child.
See “CHILD RESTRAINTS” earlier in
this section for details.

Do not lean against doors or windows.

SSS0059A

SSS0140

SSS0188A

Safety — Seats, seat belts and supplemental restraint system 1-41

SSS0162

. The seat belts, the side air bags and

curtain and rollover air bags are
most effective when you are sitting
well back and upright in the seat.
The side air bag and curtain and
rollover air bag inflate with great
force. Do not allow anyone to place
their hand, leg or face near the side
air bag on the side of the seatback
of the front seat or near the side
roof rails. Do not allow anyone
sitting in the front seats or rear

SSS0159

WARNING

Front seat-mounted side-impact sup­plemental air bags and roof-mounted
curtain side-impact and rollover supple­mental air bags:

. The side air bags and curtain and

rollover air bags ordinarily will not
inflate in the event of a frontal
impact, rear impact or lower severity
side collision. Always wear your
seat belts to help reduce the risk
or severity of injury in various kinds
of accidents.

outboard seats to extend their hand
out of the window or lean against
the door. Some examples of dan­gerous riding positions are shown
in the previous illustrations.

. When sitting in the rear seat, do not

hold onto the seatback of the front
seat. If the side air bag inflates, you
may be seriously injured. Be espe­cially careful with children, who
should always be properly re­strained. Some examples of danger­ous riding positions are shown in
the illustrations.

. Do not use seat covers on the front

seatbacks. They may interfere with
side air bag inflation.

1-42 Safety — Seats, seat belts and supplemental restraint system

1. Crash zone sensor

2. Supplemental front-impact air bag modules

3. Front seat-mounted side-impact supplemental air
bag modules

4. Occupant classification sensor (pattern sensor)

5. Occupant classification system control unit

6. Roof-mounted curtain side-impact and rollover

SSS0804

supplemental air bags

7. Roof-mounted curtain side-impact and rollover
supplemental air bag inflators

8. Lap outer pretensioners

9. Seat belt with pretensioners

10. Satellite sensors

11. Air bag Control Unit (ACU)

Safety — Seats, seat belts and supplemental restraint system 1-43

NISSAN ADVANCED AIR BAG SYS­TEM (front seats)

This vehicle is equipped with the NISSAN
Advanced Air Bag System for the driver and
front passenger seats. This system is designed
to meet certification requirements under U.S.
regulations. It is also permitted in Canada.

However, all of the information, cautions
and warnings in this manual still apply and
must be followed.

The driver supplemental front-impact air bag is
located in the center of the steering wheel; the
passenger supplemental front-impact air bag is
mounted in the instrument panel above the glove
box. The front air bags are designed to inflate in
higher severity frontal collisions, although they
may inflate if the forces in another type of
collision are similar to those of a higher severity
frontal impact. They may not inflate in certain
frontal collisions. Vehicle damage (or lack of it) is
not always an indication of proper front air bag
operation.

The NISSAN Advanced Air Bag System has
dual stage air bag inflators. The system monitors
information from the crash zone sensor, satellite
sensor, Air bag Control Unit (ACU), seat belt
buckle sensors and occupant classification
sensor (pattern sensor). Inflator operation is
based on the severity of a collision and seat belt
usage for the driver. For the front passenger, the
occupant classification sensor is also monitored.

Based on information from the sensors, only one
front air bag may inflate in a crash, depending on
the crash severity and whether th e front
occupants are belted or unbelted. Additionally,
the front passenger air bag may be automatically
turned OFF under some conditions, depending
on the information provided by the occupant
classification sensor. If the front passenger air
bag is OFF, the passenger air bag status light
will be illuminated (if the seat is unoccupied, the
light will not be illuminated, but the air bag will
be off). (See “Front passenger air bag and
status light” later in this section for further
details.) One front air bag inflating does not
indicate improper performance of the system.

If you have any questions about your air bag
system, contact NISSAN or a NISSAN dealer. If
you are considering modification of your vehicle
due to a disability, you may also contact
NISSAN. Contact information is contained in
the front of this Owner’s Manual.

When a front air bag inflates, a fairly loud noise
may be heard, followed by release of smoke.
This smoke is not harmful and does not indicate
a fire. Care should be taken not to inhale it, as it
may cause irritation and choking. Those with a
history of a breathing condition should get fresh
air promptly.

Front air bags, along with the use of seat belts,
help to cushion the impact force on the head
and chest of the front occupants. They can help

save lives and reduce serious injuries . However,
an inflating front air bag may ca use facial
abrasions or other injuries. Front air bags do
not provide restraint to the lower body.

Even with NISSAN Advanced Air Bags, seat
belts should be correctly worn and the driver
and passenger seated upright as far as practical
away from the steering wheel or instrument
panel. The front air bags inflate quickly in order
to help protect the front occupants. Because of
this, the force of the front air bag inflating can
increase the risk of injury if the occupant is too
close to, or is against, the air bag module during
inflation.

The front air bags will deflate quickly after a
collision.

The front air bags operate only when the
ignition switch is in the ON position.

After turning the ignition switch to the ON
position, the supplemental air bag warning
light illuminates. The supplemental air bag
warning light will turn off after about 7
seconds if the system is operational.

1-44 Safety — Seats, seat belts and supplemental restraint system

Front passenger air bag status light

SSS0803

Front passenger air bag and status light

WARNING

The front passenger air bag is designed
to automatically turn OFF under some
conditions. Read this section carefully
to learn how it operates. Proper use of
the seat, seat belt and child restraints is
necessary for most effective protection.
Failure to follow all instructions in this
manual concerning the use of seats,
seat belts and child restraints can
increase the risk or severity of injury in
an accident.

Status light:

The front passenger air bag status light
located on the instrument panel below the air
conditioner controls. The light operates as
follows:

. Unoccupied passenger seat: The

light
is OFF and the front passenger air bag is
OFF and will not inflate in a crash.

. Passenger’s seat occupied by a small adult,

child or child restraint as outlined in this
section: The

light illuminates to indi­cate that the front passenger air bag is OFF
and will not inflate in a crash.

. Occupied passenger seat and the passen-

ger meets the conditions outlined in this
section: The

light is OFF to indicate
that the front passenger air bag is opera­tional.

Front passenger air bag:

The front passenger air bag is designed to
automatically turn OFF when the vehicle is
operated under some conditions as described
below as permitted by U.S. regulations. If the
front passenger air bag is OFF, it will not inflate
in a crash. The driver air bag and other air bags
in your vehicle are not part of this system.

The purpose of the regulation is to help reduce
the risk of injury or death from an inflating air bag

to certain front passenger seat occupants, such
as children, by requiring the air bag to be

is

automatically turned OFF.

The occupant classification sensor (pattern
sensor) is in the front passenger seat cushion
and is designed to detect an occupant and
objects on the seat. For example, if a child is in
the front passenger seat, the Advanced Air Bag
System is designed to turn the passenger air
bag OFF in accordance with the regulations.
Also, if a child restraint of the type specified in
the regulations is on the seat, the occupant
classification sensor can detect it and cause the
air bag to turn OFF.

Front passenger seat adult occupants who are
properly seated and using the seat belt as
outlined in this manual should not cause the
passenger air bag to be automatically turned
OFF. For small adults it may be turned OFF,
however, if the occupant does not sit in the seat
properly (for example, by not sitting upright, by
sitting on an edge of the seat, or by otherwise
being out of position), this could cause the
sensor to turn the air bag OFF. Always be sure
to be seated and wearing the seat belt properly
for the most effective protection by the seat belt
and supplemental air bag.

NISSAN recommends that pre-teens and chil­dren be properly restrained in a rear seat.
NISSAN also recommends that appropriate
child restraints and booster seats be properly

Safety — Seats, seat belts and supplemental restraint system 1-45

installed in a rear seat. If this is not possible, the
occupant classification sensor is designed to
operate as described above to turn the front
passenger air bag OFF for specified child
restraints. Failing to properly secure child
restraints and to use the Automatic Locking
Retractor (ALR) mode (child restraint mode)
may allow the restraint to tip or move in an
accident or sudden stop. This can also result in
the passenger air bag inflating in a crash instead
of being OF F. (See “CHILD RESTRAINTS”
earlierinthissectionforproperuseand
installation.)

If the front passenger seat is not occupied, the
passenger air bag is designed not to inflate in a
crash. However, heavy objects placed on the
seat could result in air bag inflation, because of
the object being detected by the occupant
classification sensor. Other conditions could
also result in air bag inflation, such as if a child is
standing on the seat, or if two children are on the
seat, contrary to the instructions in this manual.
Always be sure that you and all vehicle
occupants are seated and restrained properly.

Using the passenger air bag status light, you can
monitor when the front passenger air bag is
automatically turned OFF with the seat occu­pied. The light will not illuminate when the front
passenger seat is unoccupied.

If an adult occupant is in the seat but the
passenger air bag status light is illuminated

(indicating that the air bag is OFF), it could be
that the person is a small adult, or is not sitting
on the seat properly.

If a child restraint must be used in the front seat,
the passenger air bag status light may or may
not be illuminated, depending on the size of the
child and the type of child restraint being used. If
the air bag status light is not illuminated
(indicating that the air bag might inflate in a
crash), it could be that the child restraint or seat
belt is not being used properly. Make sure that
the child restraint is installed properly, the seat
belt is used properly and the occupant is
positioned properly. If the air bag status light is
not illuminated, reposition the occupant or child
restraint in a rear seat.

If the passenger air bag status light will not
illuminate even though you believe that the child
restraint, the seat belts and the occupant are
properly positioned, the system may be sensing
an unoccupied seat (in which case the air bag is
OFF). Your NISSAN dealer can check that the
system is OFF by using a special tool. However,
until you have confirmed with your dealer that
your air bag is working properly, reposition the
occupant or child restraint in a rear seat.

The air bag system and passenger air bag status
light will take a few seconds to register a change
in the passenger seat status. However, if the
seat becomes unoccupied, the air bag status
light will remain off.

If a malfunction occurs in the front passenger air
bag system, the supplemental air bag warning
light
will blink. Have the system checked by a
NISSAN dealer.

, located in the meter and gauges area,

Other supplemental front-impact air bag
precautions

. Do not place any objects on the

steering wheel pad or on the instru­ment panel. Also, do not place any
objects between any occupant and
the steering wheel or instrument
panel. Such objects may become
dangerous projectiles and cause
injury if the front air bag inflates.

. Do not place objects with sharp

edges on the seat. Also, do not
place heavy objects on the seat that
will leave permanent impressions in
the seat. Such objects can damage
the seat or occupant classification
sensor (pattern sensor). This can
affect the operation of the air bag
system and result in serious perso­nal injury.

. Do not use water or acidic cleaners

1-46 Safety — Seats, seat belts and supplemental restraint system

WARNING

(hot steam cleaners) on the seat.
This can damage the seat or occu­pant classification sensor. This can
also affect the operation of the air
bag system and result in serious
personal injury.

. Immediately after inflation, several

front air bag system components
will be hot. Do not touch them; you
may severely burn yourself.

. No unauthorized changes should be

made to any components or wiring
of the supplemental air bag system.
This is to prevent accidental infla­tion of the supplemental air bag or
damage to the supplemental air bag
system.

. Do not make unauthorized changes

to your vehicle’s electrical system,
suspension system or front end
structure. This could affect proper
operation of the front air bag sys­tem.

. Tampering with the supplemental

air bag system may result in serious
personal injury. Tampering includes
changes to the steering wheel and
the instrument panel assembly by

placing material over the steering
wheel pad and above the instrument
panel or by installing additional trim
material around the air bag system.

. Modifying or tampering with the

front passenger seat may result in
serious personal injury. For exam­ple, do not change the front seats by
placing material on the seat cushion
or by installing additional trim ma­terial, such as seat covers, on the
seat that is not specifically designed
to assure proper air bag operation.
Additionally, do not stow any ob­jects under the front passenger seat
or the seat cushion and seatback.
Such objects may interfere with the
proper operation of the occupant
classification sensor.

. No unauthorized changes should be

made to any components or wiring
of the seat belt system. This may
affect the front air bag system.
Tampering with the seat belt system
may result in serious personal in­jury.

. Work on and around the front air

bag system should be done by a
NISSAN dealer. Installation of elec-

trical equi pment should al so be
done by a NISSAN d ealer. The
Supplemental Restraint System
(SRS) wiring harnesses* should not
be modified or disconnected. Un­authorized electrical test equipment
and probing devices should not be
used on the air bag system.

. A cracked windshield should be

replaced immediately by a qualified
repair facility. A cracked windshield
could affect the function of the
supplemental air bag system.

* The SRS wiring harness connectors are

yellow and orange for easy identifica­tion.

When selling your vehicle, we request that you
inform the buyer about the front air bag system
and guide the buyer to the appropriate sections
in this Owner’s Manual.

Safety — Seats, seat belts and supplemental restraint system 1-47

SSS0521

FRONT SEAT-MOUNTED SIDE-IM­PACT SUPPLEMENTAL AIR BAG AND
ROOF-MOUNTED CURTAIN SIDE-IM­PACT AND ROLLOVER SUPPLEMEN­TAL AIR BAG SYSTEMS

The side air bags are located in the outside of
the seatback of the front seats. The curtain and
rollover air bags are located in the side roof rails.
These systems are designed to meet voluntary
guidelines to help reduce the risk of injury to out­of-position occupants. However, all of the

information, cautions and warnings in this
manual still apply and must be followed.

The side air bags and curtain and rollover air
bags are designed to inflate in higher severity

side collisions, although they may inflate if the
forces in another type of collision are similar to
those of a higher severity side impact. They are
designed to inflate on the side where the vehicle
is impacted. They may not inflate in certain side
collisions on the side where the vehicle is
impacted. Curtain and rollover air bags are also
designed to inflate in certain types of rollover
collisions or near rollovers.

Vehicle damage (or lack of it) is not always an
indication of proper side air bag and curtain and
rollover air bag operation.

When the side air bags and curtain and rollover
air bags inflate, a fairly loud noise may be heard,
followed by release of smoke. This smoke is not
harmful and does not indicate a fire. Care should
be taken not to inhale it, as it may cause irritation
and choking. Those with a history of a breathing
condition should get fresh air promptly.

Side air bags, along with the use of seat belts,
help to cushion the impact force on the chest
and pelvic area of the front occupants. Curtain
and rollover air bags help to cushion the impact
force to the head of occupants in the front and
rear outboard seating positions. They can help
save lives and reduce serious injuries . However,
side air bags and curtain and rollover air bags
may cause abrasions or other injuries. Side air
bags and curtain and rollover air bags do not
provide restraint to the lower body.

The seat belts should be correctly worn and the
driver and passenger seated upright as far as
practical away from the side air bags. Rear seat
passengers should be seated as far away as
practical from the door finishers and side roof
rails. The side air bags and curtain and rollover
air bags inflate quickly in order to help protect
the occupants in the outboard seating positions.
Because of this, the force of the side air bags
and curtain and rollover air bags inflating can
increase the risk of injury if the occupant is too
close to, or is against, these air bag modules
during inflation. The side air bags and curtain
and rollover air bags will deflate quickly after the
collision is over.

The side air bags and curtain and rollover
air bags operate only when the ignition
switch is in the ON position.

After turning the ignition switch to the ON
position, the supplemental air bag warning
light illuminates. The supplemental air bag
warning light will turn off after about 7
seconds if the systems are operational.

WARNING

. Do not place any objects near the

seatback of the front seats. Also, do
not place any objects (an umbrella,
bag, etc.) between the front door

finisher and the front seat. Such
objects may become dangerous
projectiles and cause injury if a side
air bag inflates.

. Right after inflation, several side air

bag and curtain and rollover air bag
system components will be hot. Do
not touch them; you may severely
burn yourself.

. No unauthorized changes should be

made to any components or wiring
of the side air bag and curtain and
rollover air bag systems. This is to
prevent damage to or accidental
inflation of the side air bag and
curtain and rollover air bag systems.

. Do not make unauthorized changes

to your vehicle’s electrical system,
suspension system or side panel.
This could affect proper operation
of the side air bag and curtain and
rollover air bag systems.

. Tampering with the side air bag

system may result in serious perso­nal i njury. For example, do not
change the front seats by placing
material near the seatbacks or by
installing additional trim material,

1-48 Safety — Seats, seat belts and supplemental restraint system

such as seat covers, around the side
air bag.

. Work around and on the side air bag

and curtain and rollover air bag
systems should be done by a
NISSAN dealer. Installation of elec­trical equi pment should al so be
done by a NISSAN d ealer. The
Supplemental Restraint System
(SRS) wiring harnesses* should not
be modified or disconnected. Un­authorized electrical test equipment
and probing devices should not be
used on the side air bag and curtain
and rollover supplemental air bag
systems.

* The SRS wiring harness connectors are

yellow and orange for easy identifica­tion.

When selling your vehicle, we request that you
inform the buyer about the side air bag and
curtain and rollover air bag systems and guide
the buyer to the appropriate sections in this
Owner’s Manual.

SEAT BELTS WITH PRETENSIONERS
(front seats)

WARNING

. The pretensioners cannot be reused

after activation. They must be re­placed together with the retractor
and buckle as a unit.

. If the vehicle becomes involved in a

frontal collision but a pretensioner
is not activated, be sure to have the
pretensioner system checked and, if
necessary, replaced by a NISSAN
dealer.

. No unauthorized changes should be

made to any components or wiring
of the pretensioner system. This is
to prevent damage to or accidental
activation of the pretensioners.
Tampering with the pretensioner
system may result in serious perso­nal injury.

. Work around and on the preten-

sioner system should be done by a
NISSAN dealer. Installation of elec­trical equi pment should al so be
done by a NISSAN dealer. Un­authorized electrical test equipment

Safety — Seats, seat belts and supplemental restraint system 1-49

and probing devices should not be
used on the pretensioner system.

. If you need to dispose of a preten-

sioner or scrap the vehicle, contact a
NISSAN dealer. Correct preten­sioner disposal procedures are set
forthintheappropriateNISSAN
Service Manual. Incorrect disposal
procedures could cause personal
injury.

The pretensioner system activates in conjunc­tion with the front air bag system. The preten­sioner system also activates with the curtain and
rollover air bags in certain types of rollover
collisions or near rollovers. Working with the
seat belt retractor, it helps tighten the seat belt
when the vehicle becomes involved in certain
types of collisions, helping to restrain front seat
occupants.

The pretensioner is encased with the seat belt
retractor. These seat belts are used the same
way as conventional seat belts.

When a pretensioner activates, smoke is re­leased and a loud noise may be heard. The
smoke is not harmful and does not indicate a
fire. Care should be taken not to inhale it, as it
may cause irritation and choking. Those with a
history of a breathing condition should get fresh
air promptly.

After pretensioner activation, load limiters allow
the seat belt to release webbing (if necessary) to
reduce forces against the chest.

If any abnormality occurs in the pretensioner
system, the supplemental air bag warning light

will not come on, will flash intermittently or
will turn on for 7 seconds and remain on after
the ignition switch has been turned to the ON
position. In this case, the pretensioner system
may not function properly. They must be
checked and repaired. Take your vehicle to the
nearest NISSAN dealer.

When selling your vehicle, we request that you
inform the buyer about the pretensioner system
and guide the buyer to the appropriate sections
in this Owner’s Manual.

SUPPLEMENTAL AIR BAG WARNING
LABELS

Warning labels about the supplemental front­impact air bag systems are placed in the vehicle
as shown in the illustration.

1 SRS air bag

*

The warning labels are located on the surface of
the sun visors.

1-50 Safety — Seats, seat belts and supplemental restraint system

SSS1020

SPA1097

SUPPLEMENTAL AIR BAG WARNING
LIGHT

The supplemental air bag warning light, display­ing
circuits of the supplemental front-impact air bag,
front seat-mounted side-impact supplemental
air bag, roof-mounted curtain side-impact and
rollover supplemental air bag and seat belt
pretensioner systems. The monitored circuits
include Air bag Control Unit (ACU), crash zone
sensor, satellite sensors, occupant classification
system, front air bag modules, side air bag
modules, curtain and rollover air bag modules,
pretensioners and all related wiring.

When the ignition switch is in the ON position,

in the instrument panel, monitors the

the supplemental air bag warning light illumi­nates for about 7 seconds and then turns off.
This means the system is operational.

If any of the following conditions occur, the front
air bag, side air bag, curtain and rollover air bag
and pretensioner systems need servicing:

. The supplemental air bag warning light

remains on after approximately 7 seconds.

. The supplemental air bag warning light

flashes intermittently.

. The supplemental air bag warning light does

not come on at all.

Under these conditions, the front air bag, side air
bag, curtain and rollover air bag and preten­sioner systems may not operate properly. They
must be checked and repaired. Take your
vehicle to the nearest NISSAN dealer.

WARNING

If the supplemental air bag warning
light is on, it could mean that the front
air bag, side air bag, curtain and roll­over air bag and/or pretensioner sys­tems will not operate in an accident. To
help avoid injury to yourself or others,
have your vehicle checked by a NISSAN
dealer as soon as possible.

REPAIR AND REPLACEMENT PRO­CEDURE

The front air bags, side air bags, curtain and
rollover air bags and pretensioners are designed
to activate on a one-time-only basis. As a
reminder, unless it is damaged, the supplemen­tal air bag warning light will remain illuminated
after inflation has occurred. Repair and replace­ment of these systems should be done only by a
NISSAN dealer.

When maintenance work is required on the
vehicle, the front air bags, side air bags, curtain
and rollover air bags and pretensioners and
related parts should be pointed out to the
person performing the maintenance. The ignition
switch should always be in the LOCK position
when working under the hood or inside the
vehicle.

WARNING

. Once a front air bag, side air bag or

curtain and rollover air bag has
inflated, the air bag module will
not function again and must be
replaced. Additionally, if any of the
front air bags inflate, the activated
pretensioners must also be re­placed. The air bag module and
pretensioner system should be re-

Safety — Seats, seat belts and supplemental restraint system 1-51

placed by a NISSAN dealer. The air
bag modules and pretensioner sys­tem cannot be repaired.

. The front air bag, side air bag and

curtain and rollover air bag systems,
and pretensioner system should be
inspected by a NISSAN dealer if
there is any damage to the front
end or side portion of the vehicle.

. If you need to dispose of a supple-

mental air bag or pretensioner, or
scrap the vehicle, contact a NISSAN
dealer. Correct supplemental air
bag and pretensioner system dis­posal procedures are set forth in the
appropriate NISSAN Service Man­ual. Incorrect disposal procedures
could cause personal injury.

2 Instruments and controls

Instrument panel ................................................ 2-2

Meters and gauges............................................. 2-3

Speedometer ................................................ 2-3

Odometer/twin trip odometer ............................ 2-4

Tachometer................................................... 2-4

Engine coolant temperature gauge ..................... 2-5

Fuel gauge ................................................... 2-5

Instrument brightness control ............................ 2-6

Compass (if so equipped) .................................... 2-7

Zone variation change procedure....................... 2-8

Warning/indicator lights and audible reminders ....... 2-10

Checking bulbs ........................................... 2-10

Warning lights ............................................. 2-10

Indicator lights............................................. 2-15

Audible reminders ........................................ 2-17

Vehicle information display.................................. 2-18

Indicators for operation .................................. 2-19

Indicators for maintenance.............................. 2-22

Trip computer .............................................. 2-22

Continuously Variable Transmission (CVT)

position indicator.......................................... 2-25

Security systems.............................................. 2-26

Vehicle Security System................................. 2-26

NISSAN Vehicle Immobilizer System ................. 2-27

Windshield wiper and washer switch .................... 2-29

Rear window wiper and washer switch.................. 2-30

Rear window and outside mirror defroster switch. .... 2-31

Headlight and turn signal switch .......................... 2-31

Xenon headlights (if so equipped) .................... 2-31

Headlight switch .......................................... 2-33

Turn signal switch ........................................ 2-35

Fog light switch (if so equipped)...................... 2-36

Hazard warning flasher switch............................. 2-36

Horn ............................................................. 2-37

Heated seats (if so equipped) ............................. 2-37

Vehicle Dynamic Control (VDC) OFF switch........... 2-38

Clock ............................................................ 2-39

Adjusting the time ........................................ 2-39

Power outlet ................................................... 2-40

Storage ......................................................... 2-41

Cup holders................................................ 2-41

Sunglasses holder........................................ 2-42

Glove box .................................................. 2-43

Console box ............................................... 2-43

Luggage floor box (if so equipped)................... 2-44

Luggage side box......................................... 2-44

Cargo cover (if so equipped) .......................... 2-45

Luggage hooks (if so equipped) ...................... 2-46

Coat hooks (if so equipped) ........................... 2-46

Utility hook ................................................. 2-47

Roof rack (if so equipped).............................. 2-47

Windows ....................................................... 2-48

Power windows ........................................... 2-48

Moonroof (if so equipped).................................. 2-50

Automatic moonroof...................................... 2-50

Interior lights ................................................... 2-52

Map lights .................................................. 2-52

Ceiling light ................................................ 2-53

Vanity mirror lights (if so equipped) ...................... 2-54

Cargo light ..................................................... 2-54

HomeLink

®

Universal Transceiver (if so equipped) .... 2-55

Programming HomeLink
Programming HomeLink

customers .................................................. 2-57

Operating the HomeLink

®

............................... 2-55

®

for Canadian

®

Universal

Transceiver ................................................. 2-57

Programming trouble-diagnosis ....................... 2-57

Clearing the programmed information................ 2-57

Reprogramming a single HomeLink

®

button ........ 2-57

If your vehicle is stolen .................................. 2-58

INSTRUMENT PANEL

1. Side ventilator

2. Headlight, fog light (if so equipped) and turn
signal switch

3. Steering-wheel-mounted controls (left side)
— Audio control
— Bluetooth

2-2 Instruments and controls

®

Hands-Free Phone system control

SSI0763

4. Steering wheel
— Horn
— Driver supplemental air bag

5. Meters and gauges

6. Steering-wheel-mounted controls (right side)
— Cruise control switches

7. Wiper and washer switch

8. Center ventilator

9. Hazard warning flasher switch

10. Audio system
— Clock
— Rear view monitor (if so equipped)

11. Front passenger supplemental air bag

12. Outside remote mirror control switch

13. Headlight aiming control (if so equipped)

14. All-Wheel Drive (AWD) LOCK switch (if so
equipped)

15. Fuse box cover

16. Vehicle Dynamic Control (VDC) OFF switch

17. Hood release handle

18. Tilting steering wheel lever

19. Parking brake

20. Ignition switch

21. Heated seat switch (if so equipped)

22. Power outlet

23. Heater/air conditioner control

24. Selector lever

25. Front passenger air bag status light

26. Rear window and outside mirror (if so equipped)
defroster switch

27. Glove box

METERS AND GAUGES

SIC4534

SPEEDOMETER
Speedometer

The speedometer indicates vehicle speed in
miles per hour (MPH) or kilometers per hour
(km/h).

SIC4507

1. Tachometer

2. Vehicle information display

3. Speedometer

4. Warning/indicator lights

5. Engine coolant temperature gauge

6.

switch (twin trip odometer control and

brightness control)

7.

8. Fuel gauge

switch (settings control and trip computer

control)

The needle indicators may move slightly
after the ignition switch is turned to the
LOCK position. This is not a malfunction.

Instruments and controls 2-3

Trip A ? Trip B ? Trip A

Resetting the trip odometer:

Press and hold the
mately 1 second to reset the selected trip (Trip A
or Trip B).

switch for approxi-

SIC4575

ODOMETER/TWIN TRIP ODOMETER

The odometer and twin trip odomet er are
displayed on the vehicle information display
when the ignition switch is in the ON position.

Odometer

The odometer
vehicle has been driven.

A

records the total distance the

*

Twin trip odometer

The twin trip odometer
of 2 individual trips (Trip A and Trip B).

Changing the display:

Briefly press the
display as follows.

2-4 Instruments and controls

B

records the distance

*

C

switch

to change the

*

SIC4535

TACHOMETER

The ta chometer indicates engin e speed in
revolutions per minute (RPM). Do not rev the

engine into the red zone

1

*

.

CAUTION

When engine speed approaches the red
zone, shift to a higher gear or reduce
engine speed. Operating the engine in
the red zone may cause serious engine
damage.

SIC4513

ENGINE COOLANT TEMPERATURE
GAUGE

The gauge
temperature.

The engine coolant temperature is within the
normal range when the gauge is within the zone

B

shown in the illustration.

*

The engine coolant temperature varies with the
outside air temperature and driving conditions.

A

indicates the engine coolant

*

CAUTION

If the gauge indicates engine coolant
temperature near the hot (H) end of the
normal range, reduce vehicle speed to
decrease temperature. If the gauge is
over the normal range, stop the vehicle
as soon as safely possible. If the engine
is overheated, continued operation of
the vehicle may seriously damage the
engine. See “IF YOUR VEHICLE OVER­HEATS” in the “6. In case of emergency”
section for immediate action required.

SIC4511

FUEL GAUGE

The gauge
level in the tank.

The gauge may move slightly during braking,
turning, acceleration, or going up or down hills.

Refill the fuel tank before the gauge
registers 0.

The low fuel warning light
low fuel warning appears on the vehicle
information display when the fuel tank is getting
low. Refuel as soon as it is convenient,
preferably before the gauge reaches the empty
(0) position. There is a small reserve of fuel in the
tank when the fuel gauge reaches the empty (0)

A

indicates the approximate fuel

*

illuminates and

Instruments and controls 2-5

position.

The
located on the passenger’s side of the vehicle.

indicates that the fuel-filler door is

CAUTION

. If the vehicle runs out of fuel, the

malfunction indicator light
(MIL) may come on. Refuel as soon
as possible. After a few driving trips,
the
light remains on after a few driving
trips, have the vehicle inspected by
a NISSAN dealer.

. For additional information, see

“Malfunction Indicator Light (MIL)”
later in this section.

light should turn off. If the

SIC4596

SIC4508

INSTRUMENT BRIGHTNESS CON­TROL

The instrument brightness control operates
when the headlight switch is in the

position.

Turn the control
the meter panel and the instrument panel lights.
The brightness indicator
briefly in the vehicle information display when
the control is turned.

When the brightness level reaches the maximum
or minimum, a beep will sound.

When the brightness level reaches the minimum,
the meter panel and the instrument panel lights
will be turned off.

After the ignition switch is turned to the OFF
position, the brightness indicator
played for 30 seconds.

A

to adjust the brightness of

*

B

will be shown

*

*

B

is dis-

or

2-6 Instruments and controls

COMPASS (if so equipped)

SIC3181

When the ignition switch is turned to the ON
position, the compass display
the direction of the vehicle’s heading.

B

will indicate

*

If the display reads “C”, calibrate the compass
by driving the vehicle in 3 complete circles at
less than 5 MPH (8 km/h). You can also
calibrate the compass by driving your vehicle
on your everyday route. The compass will be
calibrated once it has tracked 3 complete
circles.

To turn on and off the compass manually, push
the
the ON position.

switch

A

while the ignition switch is in

*

Instruments and controls 2-7

2-8 Instruments and controls

Zone map

SIC0611B

ZONE VARIATION CHANGE PROCE­DURE

The difference between magnetic north and
geographical north is known as variance. In
some areas, this difference can sometimes be
great enough to cause false compass readings.
Follow these instructions to set the variance for
your particular location if this happens:

1. Push the
seconds. The current zone number will
appear in the display.

2. Find your current location and variance
number on the zone map.

NOTE:
Use zone number 5 for Hawaii.

3. Push the
new zone number appears in the display,
then release the switch. After you release
the switch, the display will show a compass
direction within a few seconds.

. If the compass deviates from the correct

indication soon after repeated adjust­ment, have the compass checked at a
NISSAN dealer.

. The compass may not indicate the

correct compass point in tunnels or
while driving up or down a steep hill.
(The compass returns to the correct

switch for more than 3

switch repeatedly until the

compass point when the vehicle moves
to an area where the geomagnetism is
stabilized.)

CAUTION

. Do not install a ski rack, antenna,

etc., which are attached to the
vehicle by means of a magnet. They
affect the operation of the compass.

. When cleaning the mirror, use a

paper towel or similar material
dampened with glass cleaner. Do
not spray glass cleaner directly on
the mirror as it may cause the liquid
cleaner to enter the mirror housing.

Instruments and controls 2-9

WARNING/INDICATOR LIGHTS AND
AUDIBLE REMINDERS

All-Wheel Drive (AWD) warning light (AWD
models)*

Anti-lock Braking System (ABS) warning
light

Brake warning light

Charge warning light Front passenger air bag status light Turn signal/hazard indicator lights

Electric power steering warning light

Engine oil pressure warning light High beam indicator light

CHECKING BULBS

With all doors closed, apply the parking brake
and turn the ignition switch to the ON position
without starting the engine. The following lights
will come on:

, or , , , , ,

The following lights come on briefly and then go
off (if so equipped):

Low fuel warning light Malfunction Indicator Light (MIL)

Low tire pressure warning light Overdrive off indicator light*

Master warning light Security indicator light

Seat belt warning light Slip indicator light

Supplemental air bag warning light Small light indicator light

All-Wheel Drive (AWD) LOCK indicator
light (AWD models)*

, or , , , , ,

If any light does not come on, it may indicate a
burned-out bulb or an open circuit in the
electrical system. Have the system checked by
a NISSAN dealer.

Some indicators and warnings are also dis­played on the vehicle information display be­tween the speedometer and tachometer. (See
“VEHICLE INFORMATION DISPLAY” later in
this section.)

Vehicle Dynamic Control (VDC) off indicator
light

*: if so equipped

WARNING LIGHTS

All-Wheel Drive (AWD) warning
light (AWD models)

The light illuminates when the ignition switch is
turned to the ON position. It turns off after the
engine is started.

If the All-Wheel Drive (AWD) system malfunc­tions, or the diameter of the front and the rear

2-10 Instruments and controls

wheels are different, the warning light will either
remain illuminated or blink. (See “ALL-WHEEL
DRIVE (AWD)” in the “5. Starting and driving”
section.)

CAUTION

. If the warning light comes on while

driving there may be a malfunction
in the AWD system. Reduce the
vehicle speed and have your vehicle
checked by a NISSAN dealer as
soon as possible.

. If the AWD warning light blinks

while driving:
— blinks rapidly (about twice a

second):

Pull off the road in a safe area,
and idle the engine. The driving
mode will change to 2WD to
prevent the AWD system from
malfunctioning. If the warning
light turns off, you can drive
again.

— blinks slowly (about once every

2 seconds):

Pull off the road in a safe area,
and idle the engine. Check that

all tire sizes are the same, tire
pressure is correct and tires are
not worn.

. If the warning light is still on after

the above operations, have your
vehicle checked by a NISSAN dealer
as soon as possible.

or Anti-lock Braking System

(ABS) warning light

When the ignition switch is in the ON position,
the Anti-lock Braking System (ABS) warning
light illuminates and then turns off. This indicates
the ABS is operational.

If the ABS warning light illuminates while the
engine is running, or while driving, it may
indicate the ABS is not functioning properly.
Have the system checked by a NISSAN dealer.

If an ABS malfunction occurs, the anti-lock
function is turned off. The brake system then
operates normally, but without anti-lock assis­tance. (See “BRAKE SYSTEM” in the “5.
Starting and driving” section.)

or Brake warning light

This light functions for both the parking brake
and the foot brake systems.

Parking brake indicator:

When the ignition switch is in the ON position,
the light illuminates when the parking brake is
applied.

Low brake fluid warning light:

When the ignition switch is in the ON position,
the light warns of a low brake fluid level. If the
light illuminates while the engine is running with
the parking brake not applied, stop the vehicle
and perform the following:

1. Check the brake fluid level. Add brake fluid
as necessary. (See “BRAKE FLUID” in the
“8. Maintenance and do-it-yourself” sec­tion.)

2. If the brake fluid level is correct, have the
warningsystemcheckedbyaNISSAN
dealer.

Anti-lock Braking System (ABS) warning
indicator:

When the parking brake is released and the
brake fluid level is sufficient, if both the brake
warning light and the Anti-lock Braking System
(ABS) warning light illuminate, it may indicate
the ABS is not functioning properly. Have the
brake system checked, and if necessary re­paired, by a NISSAN dealer promptly. (See
“Anti-lock Braking System (ABS) warning light”
earlier in this section.)

Instruments and controls 2-11

WARNING

. Your brake system may not be

working properly if the warning light
is on. Driving could be dangerous. If
you judge it to be safe, drive care­fully to the nearest service station
for repairs. Otherwise, have your
vehicle towed because driving it
could be dangerous.

. Pressing the brake pedal with the

engine stopped and/or low brake
fluid level may increase your stop­ping distance and braking will re­quire greater pedal effort as well as
pedal travel.

. If the brake fluid level is below the

minimum or MIN mark on the brake
fluid reservoir, do not drive until the
brake system has been checked at a
NISSAN dealer.

Charge warning light

If the light illuminates while the engine is running,
it may indicate the charging system is not
functioning properly. Turn the engine off and
check the alternator belt. If the belt is loose,
broken, missing or if the light remains on, see a

2-12 Instruments and controls

NISSAN dealer immediately.

CAUTION

Do not continue driving if the alternator
belt is loose, broken or missing.

Electric power steering warning
light

When the ignition switch is in the ON position,
the electric power steering warning light illumi­nates. After starting the engine, the electric
power steering warning light turns off. This
indicates the electric power steering system is
operational.

If the electric power steering warning light
illuminates while the engine is running, it may
indicate the electric power steering system is
not functioning properly and may need servicing.
Have the electric power steering system
checked by a NISSAN dealer.

When the electric power steering warning light
illuminates with the engine running, the power
assist to the steering will cease operation but
you will still have control of the vehicle. At this
time, greater steering efforts are required to
operate the steering wheel, especially in sharp
turns and at low speeds.

See “ELECTRIC POWER STEERING SYS­TEM” in the “5. Starting and driving” section.

Engine oil pressure warning light

This light warns of low engine oil pressure. If the
light flickers or illuminates during normal driving,
pull off the road in a safe area, stop the engine
immediately and call a NISSAN dealer or other
authorized repair shop.

The engine oil pressure warning light is
not designed to indicate a low oil level.
Use the dipstick to check the oil level. (See

“ENGINE OIL” in the “8. Maintenance and do-it­yourself” section.)

CAUTION

Running the engine with the engine oil
pressure warning light on could cause
serious damage to the engine almost
immediately. Such damage is not cov­ered by warranty. Turn off the engine as
soon as it is safe to do so.

Low fuel warning light

This light illuminates when the fuel in the tank is
getting low. Refuel as soon as it is convenient,
preferably before the fuel gauge reaches the 0
position.

There will be a small reserve of fuel
remaining in the tank when the fuel gauge
reaches E.

Low tire pressure warning light

Your vehicle is equipped with a Tire Pressure
Monitoring System (TPMS) that monitors the tire
pressure of all tires except the spare.

The low tire pressure warning light warns of low
tire pressure or indicates that the TPMS is not
functioning properly.

After the ignition switch is turned ON, this light
illuminates for about 1 second and turns off.

Low tire pressure warning:

If the vehicle is being driven with low tire
pressure, the warning light will illuminate. A
CHECK TIRE PRESSURE warning (if so
equipped) also appears in the vehicle informa­tion display.

When the low tire pressure warning light
illuminates, you should stop and adjust the tire
pressure to the recommended COLD tire
pressure shown on the Tire and Loading
Information label. The low tire pressure warning
light does not automatically turn off when the tire
pressure is adjusted. After the tire is inflated to
the recommended pressure, the vehicle must be
driven at speeds above 16 MPH (25 km/h) to

activate the TPMS and turn off the low tire
pressure warning light. Use a tire pressure
gauge to check the tire pressure.

The CHECK TIRE PRESSURE warning (if so
equipped) is active as long as the low tire
pressure warning light remains illuminated.

For additional information, see “VEHICLE IN­FORMATION DISPLAY” later in this section,
“TIRE PRESSURE MONITORING SYSTEM
(TPMS)” in the “5. Starting and driving” section
and “TIRE PRESSURE MONITORING SYSTEM
(TPMS)” in the “6. In case of emergency”
section.

TPMS malfunction:

If the TPMS is not functioning properly, the low
tire pressure warning light will flash for approxi­mately 1 minute when the ignition switch is
turned ON. The light will remain on after 1
minute. Have the system checked by a NISSAN
dealer. The CHECK TIRE PRESSURE warning
(if so equipped) does not appear if the low tire
pressure warning light illuminates to indicate a
TPMS malfunction.

For additional information, see “TIRE PRES­SURE MONITORING SYSTEM (TPMS)” in the
“5. Starting and driving” section.

WARNING

. If the light does not illuminate with

the ignition switch turned ON, have
the vehicle checked by a NISSAN
dealer as soon as possible.

. If the light illuminates while driving,

avoid sudden steering maneuvers or
abrupt braking, reduce vehicle
speed, pull off the road to a safe
location and stop the vehicl e as
soon as possible. Driving with un­der-inflated tires may permanently
damage the tires and increase the
likelihood of tire failure. Serious
vehicle damage could occur and
may lead to an accident and could
result in serious personal injury.
Check the tire pressure for all four
tires. Adjust the tire pressure to the
recommended COLD tire pressure
shownontheTireandLoading
Information label to turn the low
tire pressure warning light OFF. If
the light stays on after adjusting the
tire pressure and driving over 16
MPH (25 km/h), have the system
checked by a NISSAN dealer. If you
have a flat tire, replace it with a

Instruments and controls 2-13

spare tire as soon as possible.

. When a spare tire is mounted or a

wheel is replaced, the TPMS will not
function and the low tire pressure
warning light will flash for approxi­mately 1 minute. The light will
remain on after 1 minute. Contact
your NISSAN dealer as soon as
possible for tire replacement and/
or system resetting.

. Replacing tires with those not ori-

ginally specified by NISSAN could
affect the proper operation of the
TPMS.

CAUTION

. The TPMS is not a substitute for the

regular tire pressure check. Be sure
to check the tire pressure regularly.

. If the vehicle is being driven at

speeds of less than 16 MPH (25
km/h), the TPMS may not operate
correctly.

. Be sure to install the specified size

of tires to the front and rear.

Master warning light

When the ignition switch is in the ON position,
the master warning light illuminates if any of the
following are displayed on the vehicle informa­tion display.

. Intelligent Key detection warning (if so

equipped)

. Low fuel warning

. Low washer fluid warning (if so equipped)

. Parking brake release warning

. Door open warning

. Lift gate open warning

. Loose fuel cap warning (if so equipped)

. Check tire pressure warning (if so equipped)

. Setting menu operation warning

. Intelligent Key system fault warning (if so

equipped)

See “VEHICLE INFORMATION DISPLAY” later
in this section.

Seat belt warning light

The light and chime remind you to fasten seat
belts. The light illuminates whenever the ignition

switch is turned to the ON position, and will
remain illuminated until the driver’s seat belt is
fastened. At the same time, the chime will sound
for about 6 seconds unless the driver’s seat belt
is securely fastened.

The seat belt warning light for the front
passenger will illuminate if the seat belt is not
fastened when the front passenger’s seat is
occupied. For about 5 seconds after the ignition
switch is in the ON position, the system does
not activate the warning light for the front
passenger.

See “SEAT BELTS” in the “1. Safety — Seats,
seat belts and supplemental restraint system”
section for precautions on seat belt usage.

Supplemental air bag warning light

After turning the ignition switch to the ON
position, the supplemental air bag warning light
will illuminate. The supplemental air bag warning
light will turn off after about 7 seconds if the
supplemental front air bag and supplemental
side air bag, curtain side-impact air bag systems
and/or pretensioner seat belt are operational.

If any of the following conditions occur, the front
air bag, side air bag, curtain and rollover air bag
and pretensioner systems need servicing and
your vehicle must be taken to your nearest
NISSAN dealer.

2-14 Instruments and controls

. The supplemental air bag warning light

remains on after approximately 7 seconds.

. The supplemental air bag warning light

flashes intermittently.

. The supplemental air bag warning light does

not illuminate at all.

Unless checked and repaired, the Supplemental
Restraint Systems and/or the pretensioners may
not function properly.

For additional information, see “SUPPLEMEN­TAL RESTRAINT SYSTEM” in the “1. Safety —
Seats, seat belts and supplemental restraint
system” section.

WARNING

If the supplemental air bag warning
light is on, it could mean that the front
air bag, side air bag, curtain and roll­over air bag and/or pretensioner sys­tems will not operate in an accident. To
help avoid injury to yourself or others,
have your vehicle checked by a NISSAN
dealer as soon as possible.

INDICATOR LIGHTS

All-Wheel Drive (AWD) LOCK
indicator light (AWD models)

This light illuminates when the ignition switch is
turned to the ON position, and turns off within 1
second.

When selecting the LOCK mode while the
engine is running, this light will illuminate. (See
“ALL-WHEEL DRIVE (AWD)” in the “5. Starting
and driving” section.)

Front passenger air bag status
light

The front passenger air bag status light will be lit
and the passenger front air bag will be OFF
depending on how the front passenger seat is
being used.

For front passenger air bag status light opera­tion,see“NISSANADVANCEDAIRBAG
SYSTEM (front seats)” in the “1. Safety —
Seats, seat belts and supplemental restraint
system” section of this manual.

High beam indicator light

This light illuminates when the headlight high
beam is on and goes out when the low beam is
selected.

Malfunction Indicator Light (MIL)

If the malfunction indicator light illuminates
steady or blinks while the engine is running, it
may indicate a potential emission control and/or
Continuously Variable Transmission (CVT) mal­function.

The malfunction indicator light may also illumi­nate steady if the fuel-filler cap is loose or
missing, or if the vehicle runs out of fuel. Check
to make sure the fuel-filler cap is installed and
closed tightly, and that the vehicle has at least 3
US gallons (11.4 liters) of fuel in the fuel tank.

After a few driving trips, the
turn off if no other potential emission control
system malfunction exists.

If this indicator light remains on for 20 seconds
and then blinks for 10 seconds when the engine
is not running, it indicates that the vehicle is not
ready for an emission control system inspection/
maintenance test. (See “READINESS FOR
INSPECTION/MAINTENANCE (I/M) TEST” in
the “9. Technical and consumer information”
section.)

Instruments and controls 2-15

light should

Operation:

The malfunction indicator light will illuminate in
one of two ways:

. Malfunction indicator light illuminated steady

— An emission control system and/or CVT
malfunction has been detected. Check the
fuel-filler cap if the LOOSE FUEL CAP
warning (if so equipped) appears in the
vehicle information display. If the fuel-filler
cap is loose or missing, tighten or install the
cap and continue to drive the vehicle. The

light should turn off after a few driving
trips. If the
few driving trips, have the vehicle inspected
by a NISSAN dealer. You do not need to
have your vehicle towed to the dealer.

. Malfunction indicator light blinking — An

engine misfire has been detected which may
damage the emission control system.

To reduce or avoid emission control system
damage:

a) Do not drive at speeds above 45 MPH

(72 km/h).

b) Avoid hard acceleration or deceleration.

c) Avoid steep uphill grades.

d) If possible, reduce the amount of cargo

being hauled or towed.

light does not turn off after a

The malfunction indicator light may stop
blinking and remain illuminated.

Have the vehicle inspected by a NISSAN
dealer. You do not need to have your vehicle
towed to the dealer.

CAUTION

Continued vehicle operation without
having the emission control system
and/or CVT system checked and re­paired as necessary could lead to poor
driveability, reduced fuel economy, and
possible damage to the emission con­trol system.

Overdrive off indicator light (if so
equipped)

The overdrive off indicator light illuminates when
the overdrive off mode is selected.

For additional information, see ““CONTINU­OUSLY VARIABLE TRANSMISSION (CVT)” in
the “5. Starting and driving” section of this
manual.

Security indicator light

The light blinks when the ignition switch is in the
ACC, OFF or LOCK position. This function
indicates the security system equipped on the
vehicle is operational.

If the security system is malfunctioning, this light
will remain on while the ignition switch is in the
ON position. For additional information, see
“SECURITY SYSTEMS” later in this section.

Slip indicator light

This indicator will blink when the VDC system or
the traction control system is operating, thus
alerting the driver that the vehicle is nearing its
traction limits. The road surface may be slippery.

Small light indicator light

The light illuminates when the headlight switch is
turned to the

position.

Turn signal/hazard indicator lights

The light flashes when the turn signal switch
lever or hazard switch is turned on.

2-16 Instruments and controls

Vehicle Dynamic Control (VDC) off
indicator light

The light illuminates when the Vehicle Dynamic
Control (VDC) off switch is pushed to OFF. This
indicates that the VDC system is not operating.
When the VDC off in dicator light and slip
indicator light illuminate with the VDC system
turned on, this light alerts the driver to the fact
that the VDC system’s fail-safe mode is operat­ing, for example the VDC system may not be
functioning properly. Have the system checked
by a NISSAN dealer. If a malfunction occurs in
the system, the VDC system function will be
canceled but the vehicle is still driveable. For
additional information, see “VEHICLE DYNAMIC
CONTROL (VDC) SYSTEM” in the “5. Starting
and driving” section of this manual.

AUDIBLE REMINDERS
Key reminder chime

The key reminder chime sounds if the driver’s
side door is opened while the key is left in the
ignition switch and the ignition switch is in the
ACC, OFF or LOCK position. Remove the key
and take it with you when leaving the vehicle.

Light reminder chime

The light reminder chime will sound when the
driver side door is opened with the light switch
in the

or position, and the ignition

switch is in the ACC, OFF or LOCK position.

Turn the light switch off when you leave the
vehicle.

Brake pad wear warning

The disc brake pads have audible wear warn­ings. When a brake pad requires replacement, it
will make a high pitched scraping sound when
the vehicle is in motion. This scraping sound will
first occur only when the brake pedal is
depressed. After more wear of the brake pad,
the sound will always be heard even if the brake
pedal is not depressed. Have the brakes
checked as soon as possible if the warning
sound is heard.

Parking brake reminder chime

The parking brake reminder chime will sound if
the vehicle is driven at more than 4 MPH (7
km/h) with the parking brake applied. Stop the
vehicle and release the parking brake.

Seat belt warning chime

The seat belt warning chime will sound for about
6 seconds unless the driver’s seat belt is
securely fastened.

Intelligent Key door buzzer (if so
equipped)

When the chime or buzzer sounds from inside
and outside the vehicle, check for the following:

. The ignition switch is turned to the LOCK

position.

. The intelligent Key is not left inside the

vehicle.

. Doors are closed securely.

. The selector lever is in the P position.

When the buzzer sounds, be sure to check both
the vehicle and the Intelligent Key.

See “INTELLIGENT KEY SYSTEM” in the “3.
Pre-driving checks and adjustments” section.

Instruments and controls 2-17

VEHICLE INFORMATION DISPLAY

1. Outside temperature

2. Clock

3. Operation indicators and warnings
— Trip computer
— Cruise control
— Settings menu
— Intelligent Key operation*

SIC4577

4. Odometer

5. Twin trip odometer

6. Continuously Variable Transmission (CVT) posi­tion indicator

7.

switch (settings control and trip computer

control)

8.

switch (twin trip odometer control and

brightness control)

*: if so equipped

2-18 Instruments and controls

SIC4578

INDICATORS FOR OPERATION

The design of the warnings and alerts may differ
depending on the model.

1. Door open warning

This warning appears if any of the doors are
open or not closed securely. The vehicle icon
indicates which door is open on the display.

2. Lift gate open warning

This warning appears if the lift gate is open or
not closed securely. When the
pushed, the lift gate open warning turns off.

switch is

3. Loose fuel cap warning (if so
equipped)

This warning appears when the fuel-filler cap is
not tightened correctly after the vehicle has
been refueled. (See “FUEL-FILLER CAP” in the
“3. Pre-driving checks and adjustments” sec­tion.)

4. Check tire pressure warning (if so
equipped)

This warning appears when the low tire pressure
warning light in the meter illuminates and low tire
pressure is detected. If this warning appears,
stop the vehicle and adjust the tire pressure to
the recommended COLD tire pressure shown
on the Tire and Loading Information label. To
turn off the check tire pressure warning, push

Instruments and controls 2-19

the switch for about 1 second. (See “Low
tire pressure warning light” earlier in this section
and “TIRE PRESSURE MONITORING SYSTEM
(TPMS)” in the “5. Starting and driving” section.)

5. Low washer fluid warning (if so
equipped)

This light illuminates when the washer fluid is at
a low level. Add washer fluid as necessary. (See
“WINDOW WASHER FLUID” in the “8. Main­tenance and do-it-yourself” section.)

6. SHIFT “P” warning (if so equipped)

This warning appears when the ignition switch is
turned to stop the engine with the selector lever
in any position except the P (Park) position.

If this warning appears, move the selector lever
to the P (Park) position or turn the ignition
switch to the ON position.

An inside warning chime will also sound. (See
“INTELLIGENT KEY SYSTEM” in the “3. Pre­driving checks and adjustments” section.)

7. Steering lock malfunction indicator

This indicator appears when the ignition switch
cannot be released from the LOCK position.

If this indicator appears, turn the ignition switch
again while lightly turning the steering wheel
right and left.

2-20 Instruments and controls

8. Parking brake release warning

This warning appears when the vehicle speed is
above 4 MPH (7 km/h) and the parking brake is
applied.

9. Intelligent Key detection warning (if so

equipped)

This warning appears in either of the following
conditions.

No key inside the vehicle:

The warning appears when the door is closed
with the Intelligent Key left outside the vehicle
and the ignition switch in the ACC or ON
position. Make sure that the Intelligent Key is
inside the vehicle.

Unregistered Intelligent Key:

The warning appears when the ignition switch is
turned from the LOCK position and the Intelli­gent Key cannot be recognized by the system.
You cannot start the engine with an unregistered
key. Use the registered Intelligent Key.

See “INTELLIGENT KEY SYSTEM” in the “3.
Pre-driving checks and adjustments” section for
more details.

10. Key battery discharge indicator (if so
equipped)

This indicator appears when the key battery is
running out of power.

If this indicator appears, replace the battery with
a new one. (See “BATTERY REPLACEMENT” in
the “8. Maintenance and do-it-yourself” section.)

11. Intelligent Key system fault warning
(if so equipped)

CAUTION

If the Intelligent Key system fault warn­ing comes on, it may indicate a system
malfunction. Contact a NISSAN dealer
for repair.

For more information, see “INTELLIGENT KEY
SYSTEM” in the “3. Pre-driving checks and
adjustments” section.

12. Setting menu operation warning

The warning appears when you try to operate
the setting menu while driving. The setting menu
can only be entered if the vehicle is stationary.

13. Low outside temperature warning

This warning appears if the outside temperature
is below 378F(38C). The warning can be set not
to be displayed. (See “TRIP COMPUTER” later

in this section.)

14. Low fuel warning

This warning appears when the fuel level in the
tank is getting low. Refuel as soon as it is
convenient, preferably before the fuel gauge
reaches the empty (0) position.

There is a small reserve of fuel remaining
in the tank when the fuel gauge reaches
the empty (0) position.

15. Driver alert

This warning appears when the previously set
time for a break is reached. You can set the time
for up to 6 hours in the setting menu. (See “TRIP
COMPUTER” later in this section.)

16. Cruise control indicator

The cruise main switch indicator (CRUISE) is
displayed when the cruise control main switch is
pushed. When the main switch is pushed again,
the CRUISE indicator disappears. When the
CRUISE indicator is displayed, the cruise
control system is operational.

The cruise control setindicator(SET)is
displayed while the vehicle speed is controlled
by the cruise control system. If the SET indicator
blinks while the engine is running, it may indicate
that the cruise control system is not functioning
properly. Have the system checked by a
NISSAN dealer.

For more details, see “CRUISE CONTROL” in
the “5. Starting and driving” section.

SIC4538

Instruments and controls 2-21

INDICATORS FOR MAINTENANCE

1. Service due indicator

This indicator appears when the customer set
distance comes for service due, for example, for
engine oil and oil filter. You can set or reset the
distance for service due. (See “TRIP COMPU­TER” later in this section.) For scheduled
maintenance items and intervals, see your
NISSAN Service and Maintenance Guide.

2. Tire replacement indicator

This indicator appears when the customer set
distance comes for replacing tires. You can set
or reset the distance for replacing tires. (See
“TRIP COMPUTER” later in this section.)

WARNING

The tire replacement indicator is not a
substitute for regular tire checks, in­cluding tire pressure checks. See
“CHANGING WHEELS AND TIRES” in
the “8. Maintenance and do-it-yourself”
section. Many factors including tire
inflation, alignment, driving habits and
road conditions affect tire wear and
when tires should be replaced. Setting
the tire replacement indicator for a
certain driving distance does not mean
your tires will last that long. Use the tire

2-22 Instruments and controls

replacement indicator as a guide only
and always perform regular tire checks.
Failure to perform regular tire checks,
including tire pressure checks could
result in tire failure. Serious vehicle
damage could occur and may lead to a
collision, which could result in serious
personal injury or death.

3. “OTHER” indicator

This indicator appears when the customer set
distance comes for checking or replacing
maintenance items other than the engine oil, oil
filter and tires. Other maintenance items can
include such things as air filter or tire rotation.
You can set or reset the distance for checking or
replacing the items. (See “TRIP COMPUTER”
later in this section.) For scheduled maintenance
items and intervals, see your NISSAN Service
and Maintenance Guide.

SIC4551

TRIP COMPUTER

To operate the trip computer, use the
switch.

When the ignition switch is in the ON position,
modes of the trip computer can be selected by
pushing the

Each time the
display will change as follows:

Fuel Economy ? Average speed ? Driving
distance ? Elapsed time ? Range (distance to
empty) (dte) ? Settings

. When the

held for less than 3 seconds, the selected

switch

switch

switch

*

A

briefly.

A

*

A

*

A

*

is pushed, the

is pushed and

item can be reset except for “Range”,
“Current fuel consumption” and “Settings”.

. When the

switch

A

is pushed and

*

held for more than 3 seconds, all the items
on the display can be reset except for
“Current fuel consumption”, “Settings”,
“Range” and “Trip A”.

*: The display unit can be converted or varies
depending on the vehicle.

1. Fuel Economy (MPG, l/100 km)

The Fuel Economy mode shows the current and
average fuel consumption.

Example*

SIC4541

Current fuel consumption:

The current fuel consumption mode shows the
current fuel consumption by a moving bar graph.

Average fuel consumption:

The average fuel consumption mode shows the

Instruments and controls 2-23

average fuel consumption by the value above the
bar graph, the position of the diamond icon and
the value of f since the last reset. Resetting the
average fuel consumption is done by pushing
and holding the
seconds.

The display is updated every 30 seconds. At
about the first 0.3 mile (500 m) after a reset, the
display shows “----”.

switch

A

for less than 3

*

2. Average speed (MPH or km/h)

The average speed mode shows the average
vehicle speed since the last reset. Resetting is
done by pushing and holding the

B

for less than 3 seconds.

*

The display is updated every 30 seconds. For
the first 30 seconds after a reset, the display
shows “----”.

switch

3. Driving Distance (miles or km)

The Driving Distance mode shows the distance
driven since the last reset. The driving distance
can be reset by pushing and holding the
switch

A

for less than 3 seconds.

*

4. Elapsed time

Elapsed time:

The elapsed time mode shows the time since
the last reset. The displayed time can be reset
by pushing and holding the

2-24 Instruments and controls

switch

A

*

for

less than 3 seconds.

5. Range (distance to empty) (dte —

miles or km)

The distance to empty (dte) mode provides you
with an estimation of the distance that can be
driven before refueling. The dte is constantly
being calculated based on the amount of fuel in
the fuel tank and the actual fuel consumption.

The display is updated every 30 seconds.

The dte mode includes a low range warning
feature. If the fuel level is low, the warning is
displayed on the screen.

When the fuel level drops even lower, the dte
display will change to “----”.

. If the amount of fuel added is small, the

display just before the ignition switch is
turned to the “OFF” position may continue to
be displayed.

. When driving uphill or rounding curves, the

fuel in the tank shifts, which may momenta­rily change the display.

SIC4542

6. Settings

Setting cannot be made while driving.

The
the item.

Turn the
push to set.

Clock:

Clock adjustment can be set on this menu.

. Set Clock

switch

Adjust the time (hour and minute) of the
clock.

A

is used to select and set

*

A

switch to select or adjust and

*

. [On] or [Off]

Select this submenu to set the clock display
On or Off.

. [24/12 Hr]

Select this submenu to set the 12h/24h time
display mode.

To return to the top page of the setting mode,
select “BACK”.

The time display may be different from the one
on the audio display.

Units:

The units can be set for the following items on
this menu.

. Temperature

. Distance/Fuel

To return to the top page of the setting mode,
select “BACK”.

Maintenance:

The maintenance intervals of the following items
can be set or reset for the reminders.

. SERVICE

Select this submenu to set or reset the
distance for service due.

. TIRE

Select this submenu to set or reset the
distance for replacing tires.

. OTHER

Select this submenu and set or reset the
distance for items other than the items
described above.

To return to the top page of the setting mode,
select “BACK”.

Alarms:

Alarms menu can be set to notify the following
items.

. Driver Alert

Select this submenu to set the driver alert
period.

. Low Temp

Select this submenu to display the low
outside temperature warning.

To return to the top page of the setting mode,
select “BACK”.

Language:

Select the submenu to set the desired language
of the display.

Factory:

Select the submenu to reset the factory settings
of the display.

NOTE:
When resetting Factory, all previous set-

tings made are changed to default.

To return to the top page of the setting mode,
select “BACK”.

CONTINUOUSLY VARIABLE TRANS­MISSION (CVT) POSITION INDICATOR

The Continuously Variable Transmission (CVT)
position indicator indicates the selector lever
position when the ignition switch is in the ON
position.

Instruments and controls 2-25

SECURITY SYSTEMS

SIC2133

Your vehicle has two types of security systems,
as follows:

. Vehicle security system

. NISSAN Vehicle Immobilizer System

The security condition will be shown by the
security indicator light.

VEHICLE SECURITY SYSTEM

The vehicle security system provides visual and
audio alarm signals if someone opens the doors,
or lift gate when the system is armed. It is not,
however, a motion detection type system that
activates when a vehicle is moved or when a
vibration occurs.

The system helps deter vehicle theft but cannot
prevent it, nor can it prevent the theft of interior
or exterior vehicle components in all situations.
Always secure your vehicle even if parking for a
brief period. Never leave your keys in the vehicle,
and always lock it when unattended. Be aware
of your surroundings, and park in secure, well-lit
areas whenever possible.

Many devices offering additional protection,
such as component locks, identification markers,
and tracking sy stems, are available at auto
supply stores and specialty shops. Your
NISSAN dealer may also offer such equipment.
Check with your insurance company to see if
you may be eligible for discounts for various
theft protection features.

SIC2045

How to arm the vehicle security system

1. Close all windows.

The system can be armed even if the
windows are open.

2. Turn the ignition switch to the LOCK
position and remove the key if it is inserted.

3. Close all doors. Lock all doors. The doors
can be locked with:

. the lock button

Intelligent Key (if so equipped)

. any request switch (Intelligent Key

equipped model)

on the keyfob or

2-26 Instruments and controls

. the power door lock switch

. the key — master or mechanical (In-

telligent Key equipped model)

4. Confirm that the security indicator light
illuminates. The security indicator light stays
on for about 30 seconds. The vehicle
security system is now pre-armed. After
about 30 seconds the vehicle security
system automatically shifts into the armed
phase. The security light begins to flash
once every approximately 3 seconds. If,
during this 30-second pre-arm time period,
the door is unlocked, or the ignition switch is
turned to the ACC or ON position, the
system will not arm.

Even when the driver and/or passengers
are in the vehicle, the system will activate
with all doors locked with the ignition
switch in the LOCK position. When turning
the ignition switch to the ACC or ON
position, the system will be released.

Vehicle security system activation

The vehicle security system will give the follow­ing alarm:

. The headlights blink and the horn sounds

intermittently.

. The alarm automatically turns off after

approximately 50 seconds. However, the

alarm reactivates if the vehicle is tampered
with again.

The alarm is activated by:

. Unlocking the door without using the keyfob,

the Intelligent Key (if so equipped) the
request switch (if so equipped) or the key.
(Even if the door is opened by releasing the
door inside lock knob, the alarm will
activate.)

How to stop an activated alarm

The alarm will stop by unlocking a door by
pushing the unlock button
Intelligent Key, pushing the request switch or
using the key. The alarm will not stop if the
ignition switch is turned to the ACC or ON
position.

If the system does not operate as de­scribed above, have it checked by a
NISSAN dealer.

on the keyfob or

NISSAN VEHICLE IMMOBILIZER SYS­TEM

The NISSAN Vehicle Immobilizer System will not
allow the engine to start without the use of the
registered key.

If the engine fails to start using the registered
key, it may be due to interference caused by
another registered key, an automated toll road

device or automated payment device on the key
ring. Restart the engine using the following
procedures:

1. Leave the ignition switch in the ON position
for approximately 5 seconds.

2. Turn the ignition switch to the OFF or LOCK
position and wait approximately 10 seconds.

3. Repeat step 1 and 2 again.

4. Restart the engine while holding the device
(which may have caused the interference)
separate from the registered key.

If this procedure allows the engine to start,
NISSAN recommends placing the regis­tered key on a separate key ring to avoid
interference from other devices.

Statement related to section 15 of FCC
rules for NISSAN Vehicle Immobilizer
System (CONT ASSY-BCM. ANT ASSY­IMMOBILISER)

This device complies with part 15 of the
FCC Rules and RSS-210 of Industry Cana­da. Operation is subject to the following
two conditions;

(1) This device may not cause harmful
interference, and (2) this device must
accept any interference received, including
interference that may cause undesired

Instruments and controls 2-27

operation of the device.

CHANGES OR MODIFICATIONS NOT EX­PRESSLY APPROVED BY THE PARTY
RESPONSIBLE FOR COMPLIANCE COULD
VOID THE USER’S AUTHORITY TO OPER­ATE THE EQUIPMENT.

service as soon as possible. Please bring
all registered keys that you have when
visiting a NISSAN dealer for service.

SIC2045

Security indicator light

The security indicator light is located on the
meter panel. It indicates the status of the
NISSAN Vehicle Immobilizer System.

The light blinks after the ignition switch was in
the LOCK position. This function indicates the
security systems equipped on the vehicle are
operational.

If the NISSAN Vehicle Immobilizer System is
malfunctioning, this light will remain on while the
ignition switch is in the ON position.

If the light still remains on and/or the
engine will not start, see a NISSAN dealer
for NISSAN Vehicle Immobilizer System

2-28 Instruments and controls

WINDSHIELD WI PER AND WASHER
SWITCH

WARNING

In freezing temperatures the washer
solution may freeze on the windshield
and obscure your vision which may lead
to an accident. Warm windshield with
the defroster before you wash the
windshield.

CAUTION

. Do not operate the washer continu-

ously for more than 30 seconds.

. Do not operate the washer if the

reservoir tank is empty.

. Do not fill the window washer

reservoir tank with washer fluid
concentrates at full strength. Some
methyl alcohol based washer fluid
concentrates may permanently stain
the grille if spilled while filling the
window washer reservoir tank.

. Pre-mix washer fluid concentrates

with water to the manufacturer’s
recommended levels before pouring
the fluid into the window washer
reservoir tank. Do not use the
window washer reservoir tank to

mix the washer fluid concentrate
and water.

If the windshield wiper operation is inter­rupted by snow or ice, the wiper may stop
moving to protect its motor. If this occurs,
turn the wiper switch to the OFF position
and remove the snow or ice that is on and
around the wiper arms. In approximately 1
minute, turn the switch on again to operate
the wiper.

SIC2821

The windshield wiper and washer operates
when the ignition switch is in the ON position.

Push the lever down to operate the wiper at the
following speed:

1

Intermittent — intermittent operation can be

*

adjusted by turning the knob toward
(Slower) or

2

Low — continuous low speed operation

*

3

High — continuous high speed operation

*

Push the lever up
operation of the wiper.

Pull the lever toward you
washer. Then the wiper will also operate several

B

(Faster).

*

4

to have one sweep

*

5

to operate the

*

Instruments and controls 2-29

*

A

REAR WINDOW WIPER AND
WASHER SWITCH

times.

2-30 Instruments and controls

WARNING

In freezing temperatures the washer
solution may freeze on the rear window
glass and obscure your vision. Warm
the rear window with the defroster
before you wash the rear window.

CAUTION

. Do not operate the washer continu-

ously for more than 30 seconds.

. Do not operate the washer if the

reservoir tank is empty.

. Do not fill the window washer

reservoir tank with washer fluid
concentrates at full strength. Some
methyl alcohol based washer fluid
concentrates may permanently stain
the grille if spilled while filling the
window washer reservoir tank.

. Pre-mix washer fluid concentrates

with water to the manufacturer’s
recommended levels before pouring
the fluid into the window washer
reservoir tank. Do not use the
window washer reservoir tank to
mix the washer fluid concentrate

and water.

If the rear window wiper operation is
interrupted by snow or ice, the wiper may
stop moving to protect its motor. If this
occurs, turn the wiper switch to the OFF
position and remove the snow or ice that is
on and around the wiper arms. In approxi­mately 1 minute, turn the switch on again
to operate the wiper.

SIC3480

The rear window wiper and washer operate
when the ignition switch is in the ON position.

Turn the switch clockwise from the OFF position
to operate the wiper.

1

Intermittent (INT) — intermittent operation

*

(not adjustable)

2

Low (ON) — continuous low speed opera-

*

tion

3

Push the switch forward
washer. Then the wiper will also operate several
times.

to operate the

*

REAR WINDOW AND OUTSIDE
MIRROR DEFROSTER SWITCH

SIC3481

To defog/defrost the rear window glass and
outside mirrors (if so equipped), start the engine
and push the switch on. The indicator light
will illuminate. Push the switch again to turn the
defroster off.

It will automatically turn off in approximately 15
minutes.

*

CAUTION

When cleaning the inner side of the rear
window, be careful not to scratch or
damage the rear window defroster.

HEADLIGHT AND TURN SIGNAL
SWITCH

XENON HEADLIGHTS (if so equipped)

WARNING

HIGH VOLTAGE

. When xenon headlights are on, they

produce a high voltage. To prevent
an electric shock, never attempt to
modify or disassemble. Always have
your xenon headlights replaced at a
NISSAN dealer.

. Xenon headlights provide consider-

ably more light than conventional
headlights. If they are not correctly

1

aimed, they might temporarily blind
an oncoming driver or the driver
ahead of you and cause a serious
accident. If headlights are not aimed
correctly, immediately take your ve­hicle to a NISSAN dealer and have
the headlights adjusted correctly.

When the xenon headlight is initially turned on,
its brightness or color varies slightly. However,
the color and brightness will soon stabilize.

. The life of xenon headlights will be

shortened by frequent on-off opera­tion. It is generally desirable not to turn

Instruments and controls 2-31

off the headlights for short intervals
(for example, when the vehicle stops at
a traffic signal).

. If the xenon headlight bulb is close to

burning out, the brightness will drasti­cally decrease, the light will start
blinking, or the color of the light will
become reddish. If one or more of the
above signs appear, contact a NISSAN
dealer.

SIC2412A

Autolight system (if so equipped)

The autolight system allows the headlights to be
set so they turn on and off automatically.

To set the autolight system:

1. Make sure the headlight switch is in the
AUTO position.

2. Turn the ignition switch to the ON position.

3. The autolight system automatically turns the
headlights on and off.

To turn the autolight system off, turn the switch
to the OFF,

or position.

The autolight system can turn on the headlights
automatically when it is dark and turn off the
headlights when it is light.

If the ignition switch is turned to the OFF
position and one of the doors is opened and this
condition is continued, the headlights remain on
for 5 minutes.

Automatic headlights off delay:

You can keep the headlights on for up to 180
seconds after you turn the ignition switch to OFF
and open any door then close all the doors.

2-32 Instruments and controls