Nissan GT R 2014 Owner's Manual

2014

OWNER'S MANUAL

For your safety, read carefully and keep in this vehicle.

FOREWORD

Welcome to the growing family of new NISSAN owners. This vehicle is delivered to you with confidence. It was produced using the latest techniques and strict quality control.

This manual was prepared to help you understand the operation and maintenance of your vehicle so that you may enjoy many miles (kilometers) of driving pleasure. Please read through this manual before operating your vehicle.

A separate Warranty Information Booklet contains the warranties covering your vehicle (whose terms have control over this Owner’s Manual or any other document or representation regarding warranty coverage). The “NISSAN GT-R Service and Maintenance Guide” explains details about maintaining and servicing your vehicle.

Additionally, a separate Customer Care/ Lemon Law Booklet (U.S. only) will explain how to resolve any concerns you may have with your vehicle, as well as clarify your rights under your state’s lemon law.

In addition to factory installed options, your vehicle may also be equipped with additional accessories installed by NISSAN or your GT-R certified NISSAN dealer prior to delivery. It is

important that you familiarize yourself with all disclosures, warnings, cautions and instructions concerning proper use of such accessories prior to operating the vehicle and/or accessory. See a GT-R certified NISSAN dealer for details concerning the particular accessories with which your vehicle is equipped.

Your GT-R certified NISSAN dealer knows your vehicle best. When you require any service or have any questions, they will be glad to assist you with the extensive resources available to them.

READ FIRST — THEN DRIVE SAFELY

Before driving your vehicle, please read this Owner’s Manual carefully. This will ensure familiarity with controls and maintenance requirements, assisting you in the safe operation of your vehicle.

WARNING

IMPORTANT SAFETY INFORMATION REMINDERS FOR SAFETY!

Follow these important driving rules to help ensure a safe and comfortable trip for you and your passengers!

. NEVER drive under the influence of

alcohol or drugs.

. ALWAYS observe posted speed lim-

its and never drive too fast for conditions.

. ALWAYS give your full attention to

driving and avoid using vehicle features or taking other actions that could distract you.

. ALWAYS use your seat belts and

appropriate child restraint systems. Pre-teen children should be seated in the rear seat (models with rear seat).

. ALWAYS provide information about

the proper use of vehicle safety features to all occupants of the vehicle.

. ALWAYS review this Owner’s Man-

ual for important safety information.

MODIFICATION OF YOUR VEHICLE

This vehicle should not be modified. Modification could affect its performance, safety or durability, and may even violate governmental regulations. See the 2014 NISSAN GT-R Warranty Information Booklet for details including applicable exclu-

sions.

WHEN READING THE MANUAL

This manual includes information for all options available on this model. Therefore, you may find some information that does not apply to your vehicle.

All information, specifications and illustrations in this manual are those in effect at the time of printing. NISSAN reserves the right to change specifications or design at any time without notice.

IMPORTANT INFORMATION ABOUT THIS MANUAL

You will see various symbols in this manual. They are used in the following ways:

CAUTION

This is used to indicate a hazard that could cause minor or moderate personal injury. To avoid or reduce the risk, follow the information and instructions carefully.

NOTICE

This is used to indicate a hazard that could cause damage to property or your vehicle. To avoid or reduce the risk, follow the information and instructions.

If you see the symbol above, it means “Do not do this” or “Do not let this happen”.

WARNING

This is used to indicate a hazard that could cause death or serious personal injury. To avoid or reduce the risk, follow the information and instructions exactly.

If you see a symbol similar to those above in an illustration, it means the arrow points to the front of the vehicle.

Arrows in an illustration that are similar to those above indicate movement or action.

Arrows in an illustration that are similar to those above call attention to an item in the illustration.

This indicates the title and reference page.

CALIFORNIA PROPOSITION 65 WARNING

WARNING

Engine Exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. In addition, certain fluids contained in vehicles and certain products of component wear contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

CALIFORNIA PERCHLORATE ADVISORY

Some vehicle parts, such as lithium batteries, may contain perchlorate material. The following advisory is provided: “Perchlorate Material - special handling may

apply, See www.dtsc.ca.gov/ hazardouswaste/perchlorate.”

2012 NISSAN MOTOR CO., LTD.

All rights reserved. No part of this Owner’s Manual may be reproduced or stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of NISSAN Motor Co., Ltd.

NISSAN CUSTOMER CARE PROGRAM

NISSAN CARES ...

Both NISSAN and your GT-R certified NISSAN dealer are dedicated to serving all your automotive needs. Your satisfaction with your vehicle and your GT-R certified NISSAN dealer are our primary concerns. Your GT-R certified NISSAN dealer is always available to assist you with all your automobile sales and service needs.

However, if there is something that your GT-R certified NISSAN dealer cannot assist you with or you would like to provide NISSAN directly with comments or questions, please contact the NISSAN Consumer Affairs Department using our toll-free number:

For U.S. customers

1-866-668-1GTR (1-866-668-1487)

For Canadian customers

1-800-387-0122

The Consumer Affairs Department will ask for the following information:

. Your name, address, and telephone number

. Vehicle identification number (attached to

the top of the instrument panel on the driver’s side)

. Date of purchase

. Current odometer reading

. Your NISSAN dealer’s name

. Your comments or questions

You can write to NISSAN with the information on the left at:

For U.S. customers

NISSAN North America, Inc. Consumer Affairs Department P.O. Box 685003 Franklin, TN 37068-5003 or via e-mail at: nnaconsumeraffairs@nissan-usa. com

For Canadian customers

NISSAN Canada Inc. 5290 Orbitor Drive Mississauga, Ontario L4W 4Z5 or via e-mail at: information.centre@nissancanada. com

If you prefer, visit us at:

www.nissanusa.com (for U.S. customers) or www.nissan.ca (for Canadian customers)

We appreciate your interest in NISSAN and thank you for buying a quality NISSAN vehicle.

Table of

GT-R Overview

GTR

Contents

Illustrated table of contents

Safety — Seats, seat belts and supplemental restraint system

Instruments and controls

Pre-driving checks and adjustments

Display screen, heater, air conditioner and audio systems

Starting and driving

In case of emergency

Appearance and care

Maintenance and do-it-yourself

Technical and consumer information

Index

GT-R Overview

GT-R specific information ............................................... GTR-3

Warranty information .................................................. GTR-3

Maintenance information ........................................... GTR-3

GT-R special specification parts ................................... GTR-4

Engine oil ....................................................................... GTR-4

Transmission oil ........................................................... GTR-4

Differential oil (front and rear) .................................. GTR-4

Brake fluid ..................................................................... GTR-5

Tires and road wheels ............................................... GTR-5

Suspension ................................................................... GTR-6

Brake pad and disc rotor .......................................... GTR-6

Exhaust muffler and trunk carpet ............................ GTR-6

Exterior parts (spoiler, etc.) ...................................... GTR-7

Dry carbon fiber parts (if so equipped) ................ GTR-7

GT-R performance optimization services .................... GTR-8

Wheel alignment inspection and adjustment (if necessary) (including tire

pressure adjustment) ................................................. GTR-8

Engine settings (balancing right and left

air flow) .......................................................................... GTR-9

Transmission settings ................................................. GTR-9

Checking the exhaust finisher and rear

bumper clearance ....................................................... GTR-9

Increase tightening of the strut support bar

attachment section with the shock absorber ....... GTR-9

Break-in schedule ............................................................ GTR-9

Wheel alignment ..................................................... GTR-10

Precautions before driving ........................................... GTR-10

Vehicle Dynamic Control (VDC) OFF mode .... GTR-10

Summer tires ............................................................ GTR-11

All-season tires ........................................................ GTR-11

Avoiding body damage .......................................... GTR-11

Fuel ............................................................................. GTR-12

Body repair ............................................................... GTR-12

Driving after replacing tires .................................. GTR-12

Rear compartment (models with TRACK

PACK option) ........................................................... GTR-12

Additional maintenance items ..................................... GTR-13

Precautions on performance driving .................. GTR-13

Inspection and adjustments before driving ...... GTR-14

Inspection and adjustments after driving .......... GTR-19

GT-R specific vehicle characteristics ........................ GTR-24

Refueling precautions ............................................ GTR-24

Gasoline smell ......................................................... GTR-24

Outside temperature display indicates

higher temperature ................................................. GTR-24

Idle speed is not steady ........................................ GTR-24

Engine speed is restricted .................................... GTR-24

Engine output ........................................................... GTR-24

Distortion of rear spoiler ....................................... GTR-25

Uneven wear of tires ................................................ GTR-25

Noises are heard while driving .............................. GTR-25

Brake system information ........................................ GTR-27

Dry fiber carbon parts (if so equipped) ............ GTR-27

Dual clutch transmission .............................................. GTR-28

Transmission operation characteristics ............. GTR-29

GT-R SPECIFIC INFORMATION

The GT-R is NISSAN’s first supercar category vehicle. The GT-R is equipped with special systems. These systems are different than those used on conventional vehicles to allow for the high performance driving characteristics of this vehicle. Your vehicle should be maintained by a GT-R certified NISSAN dealer. Special skills, knowledge and equipment are necessary to properly maintain your GT-R.

If your vehicle is equipped with TRACK PACK option, read the relevant information later in this section.

WARRANTY INFORMATION

Please read this Owner’s Manual carefully, together with your Warranty Information Booklet which describes a number of express limitations, exclusions and ways to void your warranty for failing to follow the instructions contained in this Owner’s Manual, including, but not limited to:

. Failure to use proper parts, fuel and fluids,

. Driving with the VDC off,

. Racing,

. Any competitive driving of any sort whatso-

ever,

. Use on a track or driving on any airstrip,

. Modifications, including adding/replacing,

reprogramming, attempting to reprogram, altering, disconnecting any computer, control unit or electronic modules,

. Deleting any or all stored information in any

computer, control unit or electronic module including VSDR,

. Failure to have required GT-R Performance

Optimization Services performed.

In addition, see your tire warranty for specific limitations or exclusions for operating summer tires below −208C(−48F).

MAINTENANCE INFORMATION

. Special skills, knowledge and equipment are

necessary to properly inspect and adjust the GT-R engine, transmission, suspension and brakes to maintain performance. A GT-R certified NISSAN dealer has the GT-R certified technical staff and the special equipment to properly maintain your GT-R.

. NISSAN recommends maintenance items

that require the replacement of parts, engine oil, oil filters and air filters should be performed by a GT-R certified NISSAN dealer. Make sure the specified fluids and parts are used when the maintenance is performed. NISSAN also recommends the replacement of parts such as brakes should

be performed by a GT-R certified NISSAN dealer.

GT-R Overview GTR-3

GT-R SPECIAL SPECIFICATION PARTS

NOTICE

Only use the following specified fluids and parts in the GT-R to avoid possible vehicle damage.

ENGINE OIL

Mobil 1 (0W-40) (100% synthetic oil)

Mobil 1 (0W-40) (100% synthetic) is the factory fill oil. The VR38 engine with its plasma-sprayed bores was developed using this oil. NISSAN cannot ensure proper engine operation and durability if other synthetic oil is used. If Mobil 1 (0W-40) is not available, Mobil 1 (10W-40) (100% synthetic) may be used; however, some performance loss may be noticed.

Furthermore, replacement of the engine oil with MOTUL NISMO COMPETITION OIL type 2193E(5W40) is recommended for the frequent high performance driving opportunities or when the engine starting ability during cold weather is a concern.

NISSAN cannot ensure proper engine operation and durability if other synthetic oil is used.

The use of additives, chemical materials or abrasive compounds is prohibited.

The use of additives, chemical materials, abrasive compounds or other high performance engine oils may cause internal engine damage.

Engine oil maintenance

. When the vehicle is delivered, the engine oil

level is 0.39 in (10 mm) below the H mark on the engine oil dipstick for optimum high performance driving. The engine oil can be filled up to the H mark if not engaging in performance driving.

. Because of the high performance character-

istics of the GT-R engine, more frequent oil level inspections are necessary. Check the oil level every 1,800 miles (3,000km) and adjust as necessary. Also, change the engine oil based on the driving conditions. For the information regarding oil replacement intervals, refer to the 2014 NISSAN GT-R Service and Maintenance Guide.

. Some amount of oil is consumed by your

engine under normal operating conditions, and oil consumption by itself does not necessarily indicate any malfunction. If your rate of oil consumption increases suddenly or without explanation, NISSAN recommends that you have your vehicle inspected by a GT-R certified NISSAN dealer.

. For information about the oil replacement

intervals for performance driving, refer to the interval for replacing oil after high performance driving. ( nance items” page GTR-13)

Make sure to replace the oil filter when the engine oil is changed.

“Additional mainte-

TRANSMISSION OIL

Genuine NISSAN Transmission Oil R35 Special (100% synthetic oil)

The GT-R uses a multiple-disc dual wet clutch transmission. The specially developed transmission oil maximizes the friction characteristics of the clutch and the lubrication of the gear bearings.

The use of additives is prohibited.

The use of additives or other transmission oil may cause internal transmission or clutch damage.

DIFFERENTIAL OIL (front and rear)

Differential Oil R35 COMPETITION type 2189E

Use only the Differential Oil R35 COMPETITION type 2189E that can keep the oil temperature low in order to protect all parts of the differential and maximize the performance of the Limited

GTR-4 GT-R Overview

Slip Differential (LSD).

The use of additives is prohibited.

Using additives or any other than the specified differential oil may cause the oil temperature to increase and the final drive to be damaged. Also it may cause vibration and adversely the vehicle handling characteristics.

BRAKE FLUID

Genuine NISSAN Brake Fluid R35 Special II

Genuine NISSAN Brake Fluid R35 Special II is the factory fill brake fluid. The Vehicle Dynamic Control (VDC) unit and other related parts were specially designed for this brake fluid. NISSAN cannot ensure proper operation of the vehicle if other brake fluid is used.

TIRES AND ROAD WHEELS

Genuine GT-R tires and road wheels

Use only genuine GT-R tires and road wheels.

Tires

The GT-R uses specially designed run-flat tires and matching road wheels. Use of these specially developed tires and wheels provides the greatest potential for maximum performance.

. Using non-genuine GT-R tires may cause

powertrain system damage if the vehicle is driven in a flat tire situation, even if run-flat tires are used. This may also prevent the vehicle from being stopped safely.

. Using non-genuine GT-R tires may also

cause tire failure due to excessive heat buildup caused by tire distortion while driving.

. Using non-genuine GT-R tires may affect the

operation of the VDC system.

Tire replacement:

. When tire replacement is required, replacing

tires as a set of four with new tires is recommended. However, if a tire is punctured or damaged, it may be possible to replace only the damaged tire. Determining whether one tire or a complete set of tires should be replaced is based on a number of factors including tire wear and condition. Contact your GT-R certified NISSAN dealer. They can recommend if an individual tire or a complete set should be replaced.

. The GT-R uses specially designed run-flat

tires which have a rigid side wall. Special equipment and procedures are required when replacing these tires. NISSAN recommends that tire replacement be performed at a GT-R certified NISSAN dealer.

. Specific tire changing equipment must be

used to remove the GT-R tires from the wheel and to install the GT-R tires onto the wheel. It is only possible to reuse the tires when they have no cracks and/or deformations on the bead portion of the tire. If the incorrect equipment is used to remove the GT-R tires from the wheel and to install the GT-R tires onto the wheel, cracks and deformation may occur on the bead portion of the tires meaning that the tires cannot be reused. Contact a GT-R certified NISSAN dealer if the tires need to be removed from the wheels.

. When reusing tires, contact a GT-R certified

NISSAN dealer.

Road wheels

Using non-genuine GT-R wheels may cause the following:

. vehicle vibration

. the tire coming loose from the wheel during

a flat tire

. reduced wheel lug nut tightness

GT-R Overview GTR-5

SUSPENSION

Genuine GT-R special suspension

Use only genuine GT-R special suspension components.

Using non-genuine GT-R suspension components can affect vehicle performance and may cause body damage when driving depending on the road conditions.

GT-R TRACK PACK option Genuine special suspension (if so equipped)

Models with the TRACK PACK option are equipped with specially tuned shock absorbers, springs and suspension that optimizes performance driving.

BRAKE PAD AND DISC ROTOR

Genuine GT-R brake pads and disc rotors

Use only genuine GT-R brake pads and disc rotors.

This vehicle is equipped with cross-drilled floating rotors and radial-mounted six-piston monoblock calipers. This helps to achieve excellent stopping performance and fade-resistance.

Using non-genuine GT-R brake pads or rotors can affect vehicle braking performance and the operation of the ABS and VDC system.

Replacement of brake pads and disc rotors

NISSAN generally recommends to replace all four sets of brake pads and disc rotors at the same time to maintain maximum brake performance.

However, replacing only the brake pads may be allowed in some cases (four wheels or only front wheels depending on the conditions). A GT-R certified technician must inspect the vehicle and determine that only the brake pads need to be replaced. In this case, replacing all brake pads and disc rotors as a set is not necessary.

Note that the replacement of brake pads and the disc rotors as a set on all four wheels should be performed when a GT-R certified technician determines that this is the correct repair.

If the inside of the disc rotors are cold during the winter and the surface becomes hot due to a heavy force being applied repeatedly to the brakes, cracks may occur near the coolant hole on the surface of the disc rotor. Cracks may also occur due to a heavy force being repeatedly applied to the brakes during high performance driving. In these cases it may be necessary to replace the disc rotors or brake pads depending on the condition of the crack. Contact a GT-R certified NISSAN dealer for replacement.

EXHAUST MUFFLER AND TRUNK CARPET

Genuine GT-R special exhaust muffler and trunk carpet

Use only the genuine GT-R special exhaust muffler and trunk carpet.

The GT-R exhaust system is designed to provide the maximum vehicle performance and to protect the vehicle from high exhaust gas temperatures.

If non-genuine GT-R specification parts are used it is possible that the muffler or other exhaust system parts will deform and cause damage to the underbody. Non-genuine GT-R specification parts can also affect vehicle performance and possibly lead to turbocharger, engine or power train related parts including transmission, damage.

Also, do not remove the trunk carpet from the vehicle for any reason. The carpet insulates the vehicle interior from the heat of the muffler and from the noise of the transmission.

GTR-6 GT-R Overview

EXTERIOR PARTS (spoiler, etc.)

Do not modify exterior parts.

The GT-R was developed using a special wind tunnel to help make sure the vehicle is aerodynamically balanced. Additionally, the wind tunnel was used to help make sure cool air flows to the brakes, radiator and other components. Additions of non-genuine GT-R specific accessory exterior parts can change the air flow over and around the body. This can affect vehicle balance and cooling of various systems.

For example, if the front bumper is modified, there is a possibility that brake cooling performance may be reduced due to the decrease of the air flow to the brake system.

Use only GT-R special specification parts.

Front bumper

The shape of the bumper helps pull air into the engine compartment through the front wheel housing to cool the radiator and brakes. Installing an aftermarket bumper may affect the air flow in the engine compartment and decrease the brake and engine cooling performance. An aftermarket bumper may also change vehicle balance by reducing front down force.

Rear spoiler

Installing an aftermarket rear spoiler may change the down force balance between front and rear of the vehicle. This can affect the handling characteristics of the vehicle and affect the operation of the ABS and VDC systems.

NOTICE

Modifications to exterior parts may affect engine and transmission cooling performance which can increase the temperature in the engine compartment. This can affect the operation or damage parts located in the engine compartment.

DRY CARBON FIBER PARTS (if so equipped)

The dry carbon fiber parts are made using the same composite method used for race cars. The dry carbon fiber parts has a special coating to enhance the feel of the material.

NOTICE

. Do not use chemical agents (for

example: wax, coating agent, compound agent, etc.) on the dry carbon fiber parts because they can damage the material. When the carbon fiber parts become dirty, dilute one cap of mild detergent with a bucket of water and use that mixture to clean the carbon fiber parts.

. The dry carbon fiber parts may turn

yellow due to age deterioration because of the characteristics of the material. Storing the vehicle outside in direct sunlight for extended periods of time may cause discoloration and deterioration. NISSAN recommends that you do not store the vehicle in direct sunlight to protect the rear spoiler.

NOTE: The surfaces of the dry carbon fiber parts

are lightly coated like a race car so that you can feel the proper texture of real carbon, which may feel rough. This is normal.

GT-R Overview GTR-7

GT-R PERFORMANCE OPTIMIZATION SERVICES

In addition to the regular maintenance recommended by NISSAN, the GT-R requires the following special inspections:

. Wheel alignment inspection and adjustment

(if necessary) (including tire pressure adjustment)

. Engine settings (balancing right and left air

flow)

. Transmission settings

. Checking the exhaust finisher and rear

bumper clearance

. Increase tightening of the strut support bar

attachment section with the shock absorber

These inspections are required at the following intervals:

. 1,000 miles

. 12 months

. 24 months

. 36 months

NOTE: . These inspections will be performed

free of charge for labor at a GT-R certified NISSAN dealer only. Inspections thereafter are recommended every 12 months or 12,000 miles

(whichever comes first) at the customer’s expense. See the 2014 NISSAN GT-R Warranty Information Booklet for details.

. Repairs and adjustments involving

parts replacement, etc. determined to be necessary as a result of these inspections are performed at the customer’s expense.

. See the 2014 NISSAN GT-R Warranty

Information Booklet for significant limitations, exclusions and possible voiding of your warranty resulting from failure to have these necessary inspections, repairs and/or adjustments performed.

. See the 2014 NISSAN GT-R Service and

Maintenance Guide for a detailed explanation of the GT-R Performance Optimization Services.

WHEEL ALIGNMENT INSPECTION AND ADJUSTMENT (if necessary) (including tire pressure adjustment)

This vehicle is equipped with a high performance suspension. The vehicle’s wheel alignment needs to be measured and adjusted (if necessary) by a GT-R certified NISSAN dealer

as necessary as the vehicle is driven and the suspension parts break-in.

The wheel alignment can be adjusted by a GT-R certified NISSAN dealer in accordance with specifications for city driving to high performance driving.

The tires on the GT-R may have different wear rates and wear patterns in comparison to conventional passenger vehicles. Contact a GT-R certified NISSAN dealer to confirm that the alignment is within specifications.

Preventing toe-out: Toe-out can cause uneven tire wear or

damage to areas inside the tires due to high heat. Be sure to have the wheel alignment toe-in setting checked and adjusted by your GT-R certified NISSAN dealer before any performance driving on closed circuit tracks. Obey all traffic laws when on public roads.

Toe-in specification Front  0.059 in (1.5 mm) Rear

 0.079 in (2.0 mm)

GTR-8 GT-R Overview

ENGINE SETTINGS (balancing right and left air flow)

Each cylinder bank of this engine operates independently due to the vehicle’s twin turbocharger design. Each side of the engine must operate at the same level of performance. The air flow of each bank must be checked and adjusted as necessary by a GT-R certified NISSAN dealer.

TRANSMISSION SETTINGS

The design of the clutch and transmission requires inspection and adjustment of the clutch and shift forks by a GT-R certified NISSAN dealer at the recommended intervals. If the transmission setting is not complete, excessive loads may be applied to the transmission and power train system parts during starting and shifting, which may result in a malfunction or damage. Depending on the driving conditions, more frequent adjustments may be necessary to help maximize vehicle performance.

CHECKING THE EXHAUST FINISHER AND REAR BUMPER CLEARANCE

Clearance between the enlarged-diameter exhaust finisher and the rear bumper is realized by using highly rigid exhaust mount rubber to

control rear muffler vibration. The clearance between the exhaust finisher and the rear bumper may alter as the exhaust mount rubber changes shape due to vibration, passage of time and high exhaust temperature during high performance driving. Therefore, inspection of the clearance is necessary during the GT-R special inspection and when engaging in performance driving.

INCREASE TIGHTENING OF THE STRUT SUPPORT BAR ATTACHMENT SECTION WITH THE SHOCK ABSORBER

During the first GT-R special inspection (after 1,000 miles), the strut support bar attachment bracket and shock absorber (each one on the left and right sides) must be tightened to the specified tightening specification. The strut support bar attachment bracket and shock absorber (each one on the left and right sides) must be tightened to the specified tightening specification 300-600 miles (500-1,000 km) after the support bar or shock absorber have been removed or installed.

(

“Engine compartment check locations”

page 8-8)

BREAK-IN SCHEDULE

NOTICE

Follow these recommendations to obtain maximum engine performance and ensure the future reliability and economy of your new vehicle. Failure to follow these recommendations may result in shortened engine life and reduced vehicle performance.

Please observe the following types of driving until the mileage shown below has been reached.

Until 300 miles (500 km):

. Do not depress the accelerator pedal more

than halfway and avoid rapid acceleration.

. Drive with the engine speed kept at less

than 3,500 RPM.

. Avoid unnecessary quick steering, abrupt

braking and driving on poor roads.

300 to 600 miles (500 to 1,000 km):

. Avoid rapid acceleration in a low gear (1st to

3rd gears) with the accelerator pedal fully depressed. Depress the pedal slowly.

. Avoid unnecessary quick steering and

abrupt braking.

GT-R Overview GTR-9

. Drive with the suspension setup switch in

the COMF mode to allow more suspension stroke.

600 to 1,200 miles (1,000 to 2,000 km):

. Drive with the engine speed kept relatively

high with the shift lever in the Shifting is recommended between 1st and 4th gears.

. Avoid unnecessary quick steering and

abrupt braking.

. Drive with the suspension setup switch in

the COMF mode to allow more suspension stroke.

Even though the mileage reaches over 1,200 miles (2,000 km), the clutch may take longer to properly engage if the vehicle is mainly driven in town at a low speed. NISSAN recommends breaking in the clutch at a GT-R certified NISSAN dealer. Always perform the transmission setting after breaking in the clutch. If the transmission setting is not complete, excessive loads may be applied to the transmission and power train system parts during starting and shifting, which may result in a malfunction or damage.

position.

WHEEL ALIGNMENT

Do not adjust the wheel alignment until the mileage reaches 1,000 miles (1,600 km). Until then, the suspension may not engage enough and the height may be higher.

However, make sure to adjust the alignment after 1,000 miles (1,600 km).

The wheel alignment can be adjusted by a GT-R certified NISSAN dealer in accordance with specifications for city driving to high performance driving.

PRECAUTIONS BEFORE DRIVING

VEHICLE DYNAMIC CONTROL (VDC) OFF MODE

Always make sure the VDC is ON before driving the vehicle by checking that the VDC OFF indicator lights on the meter and the VDC set-up switch are not illuminated. The GT-R is a high performance vehicle and the VDC must be on/ activated to provide proper powertrain operation and intended drivability.

WARNING

. The VDC OFF mode should ONLY be

used briefly to help free the vehicle if stuck in snow or mud by temporarily stopping operation of the VDC to maintain wheel torque.

. Driving the GT-R with the VDC off

may lead to handling issues related to steering maneuvers, acceleration, or deceleration. Moreover, driving with the VDC off can result in an inoperative vehicle by causing serious damage to the powertrain, including damage to the Transaxle Assembly including Transfer, Clutch, Gears, Transaxle case and all of its components and other drivetrain

GTR-10 GT-R Overview

component(s) by overheating or excessive force.

. Damage to the powertrain or any

drivetrain component(s) that occurs when there is a record in the Vehicle Status Data Recorder (VSDR) that the vehicle was driven with VDC off during the period when the damage was incurred is excluded from warranty coverage.

See your 2014 Warranty Information Booklet for important related information and warranty coverage exclusions. See also section 2 (

“Transmission warning light” page 2-30) and section 5 ( (VDC) system” page 5-49) of this Owner’s Manual, “Transmission Clutch Temperature High” and “Vehicle Dynamic Control (VDC) System” for important additional related information.

“Vehicle Dynamic Control

SUMMER TIRES

The GT-R summer tires are made from a specially formulated rubber to maximize the vehicle’s performance capabilities. Performance of summer tires is substantially reduced when temperatures are less than 328F(08C) so you must drive carefully. NISSAN recommends the use of winter or all-season tires on all four wheels if you plan to operate your vehicle in snowy or icy conditions when temperatures are less than 328F(08C).

WARNING

Never use summer tires when the temperature is below −48F(−208C) to prevent permanent tread deformation which may cause tire damage or tire failure. This may cause a loss of vehicle control which can result in serious personal injury or death.

ALL-SEASON TIRES

Do not exceed the speed rating of the tire that is installed on the vehicle.

AVOIDING BODY DAMAGE

The GT-R bumper, fascia, side sills and undercarriage are close to the ground. Drive slowly on rough or uneven roads to avoid damaging these parts. Pay careful attention to wheel blocks and curbs. If the front bumper contacts a wheel block, curb, etc., the bumper and underlying parts may be damaged or cracked. Be careful not to damage the aerodynamic diffuser that is installed below the engine room.

GT-R Overview GTR-11

FUEL

NISSAN recommends using fuels that contain no alcohol. However, fuels containing up to 10% alcohol may be used, if necessary. Do not use E15 or E-85 in your vehicle. ( mendation” page 9-4)

“Fuel recom-

NOTICE

To avoid serious engine damage due to increased cylinder temperatures, do not use fuels that contain more alcohol than indicated in taining oxygenates” page 9-4. Also, do not use fuel additives, fuel stabilizers or fuel deicers that contain alcohol.

BODY REPAIR

The body of the GT-R has been manufactured on special fixtures utilizing a hybrid structure with aluminum die cast parts for the frame work. Special skills, information and equipment are required to correctly repair the body. Contact a GT-R certified NISSAN dealer if the vehicle is damaged, such as in a collision, and they will recommend an appropriate body shop.

Only certified body shops using CELETTE advanced collision repair equipment are ap-

GTR-12 GT-R Overview

“Gasoline con-

proved by NISSAN for repairing structural body damage. Contact a GT-R certified NISSAN dealer or NISSAN Consumer Affairs for a referral or list of certified body shops.

DRIVING AFTER REPLACING TIRES

Avoid the driving conditions listed under “Additional maintenance items” in this section for 48 hours after tires are installed on the wheels (

“Additional maintenance items” page GTR-13). The tire may slip on the wheel if the vehicle is driven in these conditions before 48 hours have passed. If the tire slips on the wheel, the wheel/tire assembly will be out of balance and will require rebalancing.

REAR COMPARTMENT (models with TRACK PACK option)

WARNING

The rear compartment is not equipped with seats or seat belts.

. Never allow passengers to ride in

the rear compartment.

. Never attempt to install a child

restraint in the rear compartment.

. Doing so may cause a serious injury

or death in the event of a collision or

abrupt braking.

. The rear compartment is not

equipped with seats and is not designed for cargo. Do not touch the rear compartment floor area: you may get burned due to higher surface temperatures.

ADDITIONAL MAINTENANCE ITEMS

The information and specifications in this section apply only when engaging in performance driving.

The following information applies only if you engage in performance driving such as driving your GT-R for extended periods under the following conditions.

. Higher-RPM (approaching redline) opera-

tion

. Frequent high pedal force braking from

moderate and higher speeds

. Frequent throttle activation

. Fast revving throughout the RPM range

In such cases, the following additional maintenance guidelines apply.

However, you should also carefully read your 2014 NISSAN GT-R Warranty Information Booklet for important information concerning warranty coverage, limitations and exclusions.

We recommend that all GT-R maintenance be performed at a GT-R certified NISSAN dealer. NISSAN will only pay for GT-R Performance Optimization Services performed at a GT-R certified NISSAN dealer.

PRECAUTIONS ON PERFORMA NCE DRIVING

The information and specifications in this section apply only when engaging in performance driving.

Checking the temperature of the coolant and oils on the multi function display

When the temperatures of the engine coolant and oil, and the oil pressure exceed the normal range, the color of the meter on the multi function display changes to red to warn the driver. When engaging in high performance driving, switch the display to the function meter to display the temperature of the engine coolant and oil, and the oil pressure. When the color of the meter display changes to red, perform cool down driving. When the values of the temperature and pressure return to the normal range, the color of the meter display will turn back to white.

Warning temperature:

. Engine coolant temperature is 2308F

(1108C) or higher: If the engine coolant temperature increases

above 2308F (1108C), the color of the meter display on the multi function display changes to red to warn of a possible overheat

condition and engine output is reduced.

. Engine oil temperature is 2758F (1358C) or

higher: If the engine oil temperature is higher than

2758F (1358C), the meter display changes to red, maximum engine speed is automatically limited to 4,000 rpm, and the transmission automatically changes from the position to the &Aposition.

. Transmission oil temperature is 2848F

(1408C) or higher: If the transmission oil temperature increases

to over 2848F (1408C), the color of the meter display changes to red. However, the vehicle can continue to be driven until the temperature reaches 2958F (1468C). If the oil temperature exceeds 2848F (1408C) while driving (the color of the meter displayed in red), change both the transmission oil and the differential oil after driving because these fluids have deteriorated because of the heat.

Cool down

The information and specifications in this section apply only when engaging in performance driving.

Cool down the vehicle to help extend the life of

GT-R Overview GTR-13

the vehicle if coolant temperatures are extremely high. Drive the vehicle at 37 to 50 MPH (60 to 80 km/h), in 5th or 6th gear for 2 to 3 miles (3 to 5 km) and then stop the engine.

Refueling precautions

WARNING

Do not attempt to top off the fuel tank after the fuel pump nozzle shuts off automatically. Continued refueling may cause fuel overflow, resulting in fuel spray and possibly a fire. The fuel tank is full at the first automatic shutoff.

To maximize vehicle performance, the fuel tank is located as low as possible to lower the vehicle center of gravity. The tank is also divided into two parts. This fuel tank design causes higher pressures inside the tank than other vehicles so fuel spillage is possible by trying to top off the fuel tank after automatic shutoff.

The fuel tank pressure is higher when the vehicle is hot, especially if the tank is more than half full. If the cap is opened when the vehicle is hot, it may cause fuel spray and there may be a hissing noise. Open the cap slowly, releasing the pressure from the tank gradually. Also, if the

GTR-14 GT-R Overview

vehicle is refueled when the vehicle is hot, the fuel pump may automatically shut off before the tank is full. This does not indicate that there is a malfunction. Refuel slowly or refuel after the vehicle has cooled.

INSPECTION AND ADJUSTMENTS BEFORE DRIVING

The information and specifications in this section apply only when engaging in performance driving.

Fluids

. Check the engine, transmission, differential

and under vehicle surfaces for oil and coolant leaks.

. Check the fluid levels and adjust as neces-

sary using the specified fluid as described under the conditions listed in this section. (

“Recommended fluids and maintenance interval” page GTR-20 ) If you do not drive under the conditions listed, refer to the 2014 NISSAN Service and Maintenance Guide.

. NISSAN recommends to adjust the engine

oil level (0.5 liters)) engine oil dipstick. ( mm)) Before checking the oil level, run the engine until it reaches operating temperature and wait at least 5 minutes after turning off the engine. Make sure the oil level always remains above the L mark.

When the vehicle is delivered, the engine oil is set to “H- 0.39 in (10 mm)” for optimal high performance driving.

. Some amount of oil is consumed by your

engine under normal operating conditions, and oil consumption by itself does not

to be 0.39 in (10 mm) (1/8 gal

below the H mark on the

range is 1.18 in (30

necessarily indicate any malfunction. If your rate of oil consumption increases suddenly or without explanation, NISSAN recommends that you have your vehicle inspected by a GT-R certified NISSAN dealer.

Coolant level and mixture ratio

The information and specifications in this section apply only when engaging in performance driving.

Check the coolant level in the pressurized coolant reservoir. Adjust the level so that the fluid is between the MAX and MIN markings. For the coolant, use genuine NISSAN Long Life coolant. (On delivery of new vehicle, the reservoir is filled to the MIN level. Be sure to replenish approximately 3/8 US quart (0.3 to 0.4 liter) of coolant.)

. Adjust the power steering fluid level to the R

mark when the fluid temperature is hot or when the fluid temperature is cold.

Fluid temperature: Hot: 122 to 1768F (50 to 808C): between

Cold: 32 to 868F(0to308C): between and

on the power steering dipstick

and

NOTICE

Do not overfill the coolant. This may

increase the pressure in the cooling system and cause coolant leaks.

To maximize vehicle performance, the coolant mixture ratio should be a combination of 30%

coolant antifreeze and 70% demineralized or distilled water for maximum cooling system performance regardless of ambient temperatures.

If ambient temperatures are anticipated below 58F(−158C), make sure a proper mixture ratio of 50% antifreeze and 50% demineralized or

GT-R Overview GTR-15

distilled water mix is used.

Engine and powertrain

The information and specifications in this section apply only when engaging in performance driving.

. Check the engine, transmission, differential

and under the vehicle for oil and coolant leaks.

. Inspect the areas surrounding of the cata-

lytic converter for heat deterioration.

. Always perform the transmission setting.

After that, adjust the clutch clearance so that the clearance is less than the clearance used for daily driving. Your GT-R certified NISSAN dealer has the necessary information and equipment to set the clutch clearance to the correct specification. The clearance used for daily driving increases clutch heat generated during Performance Driving. This leads to an increase in temperature of the transmission oil. In addition, a more direct shifting feel can be obtained by reducing the clutch clearance for Performance Driving. The clutch clearance should be reset to the daily driving specification after Performance Driving. See your GT-R certified NISSAN dealer for information.

GTR-16 GT-R Overview

NOTICE

Failure to have the clutch properly adjusted before performance driving may cause the transmission oil temperature to increase which may cause transmission damage.

. Inspect and confirm the clearance between

the exhaust finisher and rear bumper is more than 0.24 in (6 mm) (up/down) and more than 0.20 in (5 mm) (left/right).

. Inspect the dust boot of the drive shaft

universal joint for cracks or damage.

Suspension and wheel alignment

The information and specifications in this section apply only when engaging in performance driving.

. Check the steering and suspension system

and other links for loose and/or damaged parts.

. Measure and adjust the wheel alignment.

(

“Wheel alignment” page GTR-10) Contact a GT-R certified NISSAN dealer to adjust the wheel alignment to the recommended setting for high performance driving.

Preventing toe-out: Toe-out can cause uneven tire wear or

Toe-in specification Front  0.059 in (1.5 mm) Rear

 0.079 in (2.0 mm)

Wheels and tires

The information and specifications in this section apply only when engaging in performance driving.

. Check tire wear and cracking.

. Inspect the tire side wall for damage.

. Check the tire pressure and adjust the

pressure as necessary when the tires are cold. (

. Adjust the tire pressure to the specification

shown in the table, in order to make the balance of rigidity between the front and rear tires more uniform when the temperature of the tires increases due to driving at high speed or engaging in high performance driving.

“Wheels and tires” page 8-32)

Condition Pressure PSI (kPa) Starting to drive (Tires are cold) Front: 30.5 (210) - 31.9 (220), Rear: 29 (200) Increasing tire pressure (Tires are hot) Front: Not exceeding 39.2 (270) ,

The tire pressure changes depending on the outside temperature or altitude. Check the tire pressure regularly and when the climate condi-

Rear: Not exceeding 37.7 (260)

* The following chart indicates how the tire pressure will decrease as outside air temperature decreases.

tions change.

GT-R Overview GTR-17

WARNING

Keep your tires inflated to the correct tire pressure. Driving with low tire pressure can damage some powertrain systems and affect the operation of the ABS and VDC systems. Low Tire pressure may also cause tire failure and result in serious personal injury or death.

. Make sure the tire valve stem cap is installed

and that the valve stem is tight. When installing the cap, make sure to tighten the cap by hand. If a tool is used to tighten the cap, the cap may be damaged.

. Make sure the wheel nuts are tight.

(

“Wheels and tires” page 8-32)

. Make sure the drive shaft nuts are tight.

. Make sure to replace the grommet seal, the

valve core and the valve cap of the Tire Pressure Monitoring System (TPMS) sensor attached to the wheel every 3 years for performance driving use. Replace them every 5 years even when not engaging in performance driving. A dirty grommet seal will cause the air leak from the tire.

GTR-18 GT-R Overview

. Make sure that the nuts and valves that are

attached to the TPMS sensor are tight and there is no nitrogen leak.

. Use only a NISSAN genuine valve cap or

equivalent.

. Check wheel hub run out and that the wheel

rotates smoothly without any friction. Check these with the tires removed whenever an inspection is performed with the vehicle jacked up.

. Secure road wheel balance weights with

aluminum tape.

. Check that the wheel nuts are not stripped.

. Make sure the tire has not slipped on the

wheel causing the assembly to be out of balance. The reference marks on the tire and wheel should be aligned. If the reference marks are not aligned, the tire has slipped on the wheel. Have the wheels/tires rebalanced. Make sure the old reference marks are erased and new reference marks are applied to the wheel and tire. When installing new tires on the wheels, make sure new reference marks are applied to the wheels and tires.

. Avoid the driving conditions listed under

“Additional maintenance items” in this section for 48 hours after tires are installed on

the wheels. The tire may slip on the wheel if the vehicle is driven in these conditions before 48 hours have passed. If the tire slips on the wheel, the wheel/tire assembly will be out of balance and will require rebalancing.

Brakes

The information and specifications in this section apply only when engaging in performance driving.

. Check for the heat deterioration of the

brakes and parts around the brakes.

. It is recommended that you remove air from

the brake system after any of the following: — When engaging in high performance

driving for the first time after purchasing

a new vehicle. — After replacing the brake fluid. — When engaging in high performance

driving for a sustained period of time. It

is recommended that bleeding the brake

be performed when the brake calipers

are hot (about 2128F (1008C)).

Brake pad:

NISSAN recommends adding an additional cross spring to the front calipers before engaging in performance driving. The additional spring reduces brake pad movement resulting

from cornering forces and will reduce the stroke of the brake pedal. Contact a GT-R certified NISSAN dealer to purchase the spring and arrange installation. If a cross spring is added, a clattering or squeaking sound may be heard on rare occasions.

Brake pad break-in procedure:

NISSAN recommends that a special brake pad break-in procedure be performed before engaging in performance driving. Contact a GT-R certified NISSAN dealer for details.

INSPECTION AND ADJUSTMENTS AFTER DRIVING

The information and specifications in this section apply only when engaging in performance driving.

NOTICE

At the completion of performance driving, all fluid and other adjustments should be returned to the normal fluid specifications as shown in the “Maintenance and do-it-yourself” section of this manual.

Fluids

The information and specifications in this section apply only when engaging in performance driving.

. Check the engine, transmission, differential

and under the vehicle for oil and coolant leaks.

. Check the fluid levels and adjust as neces-

sary using the specified fluid as described under the conditions listed in this section. (

“Recommended fluids and maintenance interval” page GTR-20) If you do not drive under the conditions listed, refer to the 2014 NISSAN Service and Maintenance Guide.

. When changing fluids, be sure to use the

specified fluids as described in this Owner’s manual. ( mended fuel/lubricants” page 9-2)

“Capacities and recom-

GT-R Overview GTR-19

Recommended fluids and maintenance interval

The information and specifications in this section apply only when engaging in performance driving.

ITEMS Engine Oil

GT-R SPECIFIED FLUIDS

MAINTENANCE INTERVAL

*1: Mobil 1 (0W-40) (100% synthetic) is the factory fill oil. The VR38 engine with its plasma-sprayed bores was developed using this oil. NISSAN cannot ensure proper

engine operation and durability if other 0W-40 synthetic oil is used. If Mobil 1 (0W-40) is not available, Mobil 1 (10W-40) (100% synthetic) may be used; however, some performance loss may be noticed.

Mobil 1 (0W-40)*1

. When the oil temperature stays

below 2308F (1108C) while driving

. When the oil temperature reaches

between 2308F (1108C) and 2668F (1308C) while driving

. When the oil temperature exceeds

2668F (1308C) while driving

Change engine oil and engine oil filter at the same interval as Schedule 1 and 2 in the 2014 NISSAN GT-R Service and Maintenance Guide.

Change engine oil and engine oil filter every 3,000 miles (5,000 km).

Change engine oil and engine oil filter immediately after stopping.

GTR-20 GT-R Overview

ITEMS Transmission Oil

GT-R SPECIFIED FLUIDS Genuine NISSAN Transmission Oil R35 Special

. When the oil temperature stays

below 2488F (1208C) while driving

Change transmission oil at the same interval as Schedule 1 and 2 in the 2014 NISSAN GT-R Service and Maintenance Guide.

. When the oil temperature reaches

MAINTENANCE INTERVAL

between 2488F (1208C) and 2848F (1408C) while driving

. When the oil temperature exceeds

2848F (1408C) while driving

ITEMS Differential Oil (front and rear)

GT-R SPECIFIED FLUIDS Differential Oil R35 COMPETITION type 2189E*2

. When the oil temperature stays

below 2488F (1208C) while driving

Change transmission oil every 3,000 miles (5,000 km).

Change both transmission oil and differential oil immediately after stopping. Differential oil temperature usually increases concurrently.

Change differential oil at the same interval as Schedule 1 and 2 in the 2014 NISSAN GT-R Service and Maintenance Guide .

. When the oil temperature reaches

MAINTENANCE INTERVAL

between 2488F (1208C) and 2848F (1408C) while driving

. When the oil temperature exceeds

2848F (1408C) while driving

*2: The differential oil temperature cannot be displayed on the multi function display. The differential oil temperature can be checked with the transmission oil temperature

since both usually increases or decrease concurrently.

Change transmission oil every 3,000 miles (5,000 km).

Change both transmission oil and differential oil immediately after stopping. Differential oil temperature usually increases concurrently as the transmission oil temperature.

GT-R Overview GTR-21

ITEMS Brake Fluid GT-R SPECIFIED FLUIDS Genuine NISSAN Brake Fluid R35 Special II*3 MAINTENANCE INTERVAL Change brake fluid every 3,000 miles (5,000 km).

*3: Genuine NISSAN Brake Fluid R35 Special II is the factory fill brake fluid. The Vehicle Dynamic Control (VDC) unit and other related parts were specially designed for this

brake fluid and NISSAN cannot ensure the best performance and proper operation of the vehicle if other brake fluid is used.

GTR-22 GT-R Overview

Suspension and wheel alignment

. Check the steering and suspension system

and other links for loose and/or damaged parts.

. Measure and adjust the wheel alignment.

Contact a GT-R certified NISSAN dealer to adjust the wheel alignment to the recommended setting for normal driving.

Wheels and tires

. Check tire wear and cracking.

. Inspect the tire side wall for damage.

. Check the tire pressure and adjust the

pressure as necessary when the tires are cold. (

17) If you do not drive under the conditions listed in this section, see ( tires” page 8-32)

. Check that the wheel nuts are not stripped.

Check if there is no deformation on the contact surface of the wheel nuts.

. Make sure the wheel nuts are tight.

(

. Make sure the drive shaft nuts are tight.

. Check wheel hub run out and that the wheel

rotates smoothly without any friction. Check these with the tires removed whenever an

“Wheels and tires” page GTR-

“Wheels and

“Wheels and tires” page 8-32)

inspection is performed with the vehicle jacked up.

. Make sure the tire has not slipped on the

. Make sure that the TPMS sensor installation

nuts and the sensor valve are tight and there is no nitrogen leak.

“Wheels and tires” page

Brakes

. Check for the heat deterioration of the

brakes and parts around the brakes.

. Check the condition of the brake pads and

disc rotors and replace them as necessary.

Engine and powertrain

. Check the engine, transmission, differential

and under the vehicle for oil and coolant

leaks.

. Inspect the area surrounding the catalytic

converter for heat deterioration.

. Inspect and confirm the clearance between

the exhaust finisher and rear bumper is more than 0.24 in (6 mm) (up/down) and more than 0.20 in (5 mm) (left/right).

. The clutch clearance and shift fork position

may need to be adjusted.

. Inspect the dust boot of the drive shaft

universal joint for cracks or damage.

. Check that there is no abnormal noise,

vibrations or warning lights illuminated when making tight turns at slow speed (for tight corner braking phenomenon).

GT-R Overview GTR-23

+ 324 hidden pages