Nissan 999U7-VR000, 999U7-VR001, 999U7-VR002SP User Manual
y
y
GENUINE PARTS
iPOD INSTALLATION INSTRUCTIONS
1. DESCRIPTION: iPod
2. PART NUMBERS: iPod Gateway Module Kit (Nissan 2004-05)
iPod Gateway Module Kit (Infiniti 2004-05)
N-Bus harness for iPod Gatewa
N-Bus harness for [optional] SAT Radio
3. MODEL APPLICATION:
4. iPOD GATEWAY MODULE KIT CONTENTS (999U7-VR000/1):
No. Qt
11
iPod Gateway Module
212
Cable tie (8")
36
Cable tie (15")
41
Double-Sided Tape
59
Foam Tape
61
Grommet
71
Alcohol Wipe
81
iPod Cable
91
Quick Reference Card
10 1
Owners Manual
11 1
Service Info Insert
12 1
Critical Installation Info
ARMADA, TITAN & QX56 (2004~5) w/ SAT Pre-wired N-Bus Harness
Parts ViewParts
999U7-VR000
999U7-VR001
999U7-VS000
999U7-VS001
CAUTION
• Cut the excess cable tie(s) as flush with the head as possible. Face head of cable tie away from sheet metal
and other objects.
• Use caution when removing/re-installing interior components to avoid damage, scratches, or breaking of
mounting clips.
NOTE
• This is a universal installation kit so all parts may not be used.
• Refer to the vehicle specific SAT radio Installation Instructions on ASIST.NET for further information.
• Ensure the Owners Manual and Quick Reference Card are placed in the customers glove box.
• Check the customer's iPod to make sure it has the most current software version before starting the install.
(www.apple.com/ipod)
• In the event the iPod system needs to be serviced, order the iPod Service Kit below.
iPod Gateway Service Kit 999U7-VS002SP
3.14.06 284-9798-100-I1
5. TOOLS & MATERIALS REQUIRED:
1. Phillips screwdriver (#2)
2. Electrical tape
3. Masking tape
4. Drill
PGF Stick
6. INSTALLATION OUTLINE:
ARMADA,
QX56 &
TITAN
5. 1/8”, 11/16” drill bits
6. ¼” driver w/ 8mm socket
7. Plastic Pry bar
8. PGF Stick
Fig. 1
Satellite Radio
[optional]
SAT Pre-wired N-Bus harness
999U7-VS001 [optional]
Vehicle Front
Head Unit
999U7-VS000
iPod (glove box)
iPod Gateway
Module
iPod cable
3.14.06 2/11 284-9798-100-I1
7. VEHICLE PREPARATION:
(1) Apply parking brake.
(2) Record the customer radio presets.
Bank 1234567
A
B
C
(3) Make sure that the shift lever is engaged in the "P" position.
ARMADA,
QX56 &
TITAN
(4) If equipped, move the accelerator and brake pedals to the front most position.
(5) Turn the ignition switch OFF
(6) Open engine hood.
(7) Disconnect the battery negative terminal to prevent short circuits during installation.
(8)
Locate N-BUS harness on the speaker amplifier bracket. Fig. 2
Fig. 2
3.14.06 3/11 284-9798-100-I1
(9) Remove the following interior parts as shown in Fig. 2 (Refer to vehicle service manual
)
a) Instrument lower cover LH
b) Instrument lower cover RH
Glove Box assembly
c)
ARMADA,
QX56 &
TITAN
a)
Instrument lower cover LH
Fig. 3
alignment pin
clip points
b)
clip points
alignment pin
Instrument lower cover RH
c)
Glove Box assembly
3.14.06 4/11 284-9798-100-I1
Loading...