CT800_Series_IB_E_170718_MP.indd 32017-07-18 10:05 AM
1- 877-646-5288
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY
WARNING
To reduce the risk of injury, fire, electrical shock, or property damage, basic
safety precautions must ALWAYS be followed, including the following
numbered warnings and subsequent instructions.
1 Read all instructions prior to using the
appliance and its accessories.
2 Carefully observe and practice all warnings
and instructions. This unit contains
electrical connections and moving parts
that potentially present risk to the user.
3 ALWAYS handle the 72 oz. Pitcher with
care when cleaning. Contact with the blade
assembly will result in a risk of laceration.
4 Take your time and exercise care during
unpacking and appliance setup. This
appliance contains sharp blades that can
cause injury if mishandled.
5 Take inventory of all contents to ensure
you have all parts needed to properly and
safely operate your appliance.
6 ALWAYS exercise care when handling
the Pro Extractor Blades® Assembly. The
blades are sharp. ONLY grasp the Pro
Extractor Blades Assembly by the outer
perimeter of the blade assembly base.
Failure to use care when handling the blade
assembly will result in a risk of laceration.
7 Unplug the appliance from the outlet
when not in use, before assembling or
disassembling parts, and before cleaning.
To unplug, grasp the plug by the body and
pull from the outlet. NEVER unplug by
grasping and pulling the flexible cord.
8 To protect against electric shock, DO
NOT unplug from electrical outlet while
unit is running. Turn the unit off first before
unplugging.
9 Before first use, wash all parts that may
contact food. Follow washing instructions
covered in this instruction manual.
10 To protect against the risk of electric
shock, DO NOT submerge the appliance
or allow the power cord to contact any
form of liquid.
11 DO NOT use this appliance outdoors. It is
designed for indoor household use only.
12 This appliance has a polarized plug (one
prong is wider than the other). To reduce
the risk of electric shock, this plug will fit
in a polarized outlet only one way. If the
plug does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a
qualified electrician. DO NOT modify the
plug in any way.
3
CT800_Series_IB_E_170718_MP.indd 42017-07-18 10:05 AM
ninjakitchen.com
ENGLISH
13 DO NOT operate any appliance with
a damaged cord or plug, or after the
appliance malfunctions, or has been
dropped or damaged in any manner. This
appliance has important information on
the plug prong. The entire cord set is NOT
suitable for replacement. If damaged,
please contact SharkNinja LLC for service.
14 DO NOT use extension cords with this
appliance.
15 DO NOT allow young children to operate
this appliance or use as a toy. Close
supervision is necessary when any
appliance is used near children.
16 This appliance is not intended to be used
by people (including children) with reduced
physical, sensory, or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision or
instruction concerning use of the appliance
by a person responsible for their safety.
17 Before each use, inspect blade assemblies
for damage. If a blade is bent or damage is
suspected, contact SharkNinja to arrange
for replacement.
18 DO NOT attempt to sharpen blades.
19 DO NOT allow the cord to hang over the
edge of tables or counters or to contact
hot surfaces, including stoves and other
heating appliances.
20 ALWAYS use the appliance on a dry and
level surface.
21 Keep hands, hair, and clothing out of the
pitcher and Single-Serve Cup when loading
and operating.
22 ONLY use attachments and accessories
that are provided with the product or are
recommended by SharkNinja. Use of
attachments not recommended or sold by
SharkNinja may cause fire, electric shock,
or injury.
CONTINUED ON PAGE 5
SAVE THESE INSTRUCTIONS
4
CT800_Series_IB_E_170718_MP.indd 52017-07-18 10:05 AM
1- 877-646-5288
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY
WARNING
To reduce the risk of injury, fire, electrical shock, or property damage, basic
safety precautions must ALWAYS be followed, including the following
numbered warnings and subsequent instructions.
23 During operation and handling of the
appliance, avoid contact with moving
parts.
24 DO NOT operate the appliance with an
empty pitcher or cup.
25 While blending liquids or ingredients that
are frozen, cold, or room temperature, DO NOT fill pitcher past the MAX LIQUID line.
26 DO NOT microwave any pitcher or
accessories provided with the appliance.
27 Before operation, ensure all utensils are
removed from pitcher and cup. Failure
to remove utensils can cause vessel to
shatter and potentially result in personal
injury and property damage.
28 ALWAYS operate blender with lid and lid
cap firmly in place. The lid cap should be
removed only when adding ingredients and
when using the tamper. NEVER remove
the lid cap while blending hot liquids.
29 Keep hands and utensils out of pitcher
and cup while blending to reduce the risk
of severe injury or damage to the blender.
While the blender is running, the ONLY
utensil that may be used is the included
tamper. When the blender is NOT running,
then a scraper may be used.
30 DO NOT blend hot ingredients or liquids
in the blender cup. Doing so may cause
excessive pressure buildup, resulting in
the risk of the user being burned. Only
the pitcher can be used to blend hot
ingredients.
31 To avoid risk of scalding from spray or
escaping steam, DO NOT blend hot
or warm liquids or ingredients beyond
the MAX HOT LIQUID fill line. Liquids or
ingredients above the MAX HOT LIQUID
fill line need to be at room temperature or
colder for processing.
32 DO NOT blend hot ingredients or liquids
on the pulse setting to avoid risk of
scalding from spray or escaping steam.
33 To avoid the risk of scalding, NEVER
operate the appliance without pitcher
lid and lid cap in place while blending
hot liquids. DO NOT use the tamper
while blending hot liquids. Keep hands
and exposed skin away from lid cap
while blending hot ingredients to prevent
possible burns from escaping steam.
Failure to keep the lid cap in place while
blending hot liquids may result in risk of
scalding.
34 Handle the pitcher with care when blending
hot ingredients, as the lid, lid cap, and
sides of pitcher may become hot to touch.
When moving the pitcher, use the handle
to carry. If needed, hold bottom of pitcher
to stabilize.
5
CT800_Series_IB_E_170718_MP.indd 62017-07-18 10:05 AM
ninjakitchen.com
ENGLISH
35 If at any time the blender cup becomes
warm to the touch, or steams or vents
while blending, immediately stop blending
ingredients and turn off the unit.
36 DO NOT perform grinding operations
with the blender cups and Pro Extractor
®
Blades
37 Remove the Pro Extractor Blades
Assembly from the blender cup upon
completion of blending. DO NOT store
ingredients before or after blending them in
the cup with the blade assembly attached.
Some foods may contain active ingredients
or release gases that will expand if left in
a sealed container, resulting in excessive
pressure buildup that can pose a risk of
injury. For ingredient storage in the cup,
use only Spout Lid to cover.
38 NEVER place a blade assembly on the
motor base without it first being attached
to its corresponding container and lid.
39 Flashing light indicates ready to operate.
Avoid any contact with blades or moveable
parts.
40 DO NOT attempt to defeat the interlock
mechanism. Ensure the pitcher and lid are
properly installed before operation.
41 DO NOT expose the pitcher, cup,
blade assemblies, and accessories to
extreme temperature changes. They may
experience damage.
Assembly.
42 NEVER leave the appliance unattended
while in use.
43 If you find unmixed ingredients sticking to
the sides of the pitcher, use the included
tamper, with the lid locked on the pitcher,
to dislodge ingredients when unit is
operating. If not using the tamper, stop
the appliance, remove the lid, and use a
spatula to dislodge ingredients. NEVER
insert your hands into the pitcher, as
you may contact one of the blades and
experience a laceration.
44 DO NOT attempt to remove the pitcher,
pitcher lid, or cup from the motor base
while the blade assembly is still spinning.
Allow the appliance to come to a complete
stop before removing pitcher, pitcher lid,
or cup.
45 If the appliance overheats, a thermal
switch will activate, temporarily disabling
the motor, and the control panel will not
function when modes are pressed and
display "Err". To reset, unplug the appliance
and allow it to cool for approximately 15
minutes before using again.
46 The maximum wattage rating for this
appliance is based on the configuration
of the Bottom Blades and pitcher. Other
configurations may draw less power or
current.
47 DO NOT spray the motor base or screen
with water or other liquids.
48 Turn off the appliance and unplug the
motor base before cleaning.
SAVE THESE INSTRUCTIONS
6
CT800_Series_IB_E_170718_MP.indd 72017-07-18 10:05 AM
1- 877-646-5288
GETTING TO KNOW YOUR NINJA
CHEF™ BLENDER
WELCOME!
Congratulations on
your purchase. Use this
instruction manual to
learn about the great
features of your Ninja
Chef blender. From
assembly to use to
maintenance, you will
find it all in here.
There are a variety of
accessories that are compatible
with this blenderseries.
NOTE: The top flap of
your box shows the select
accessories that are
included with your model.
Visit ninjaaccessories.com to
purchase our Single-Serve
Cup Kit or the Double-Walled
To-Go Tumbler with Spout Lid,
so you can blend drinks and
take them on the go.
If you have any questions,
concerns, or feedback, we
would love to hear from you.
Give us a call at 1-877-6465288 or visit ninjakitchen.com
*64 oz. max liquid capacity
MAIN UNIT
A Lid Cap
B Pitcher Lid
C 72 oz. Pitcher*
D Bottom Blades
E Motor Base
F Activation Dial
G Tamper
AVAILABLE ACCESSORIES
H 24 oz. Double-Walled To-Go Tumbler
I 24 oz. Single-Serve Cup
J Spout Lid
K Pro Extractor Blades® Assembly
7
CT800_Series_IB_E_170718_MP.indd 82017-07-18 10:05 AM
Loading...
+ 16 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.