Ninja BL687CO Owner's Manual

BL687CO

®

OWNER’S GUIDE

www.ninjakitchen.com

1-877-646-5288

IMPORTANT SAFETY INSTRUCTIONS

For Household Use Only

WHEN USING ELECTRICAL APPLIANCES,

3 WARNING: Stacked Blade Assembly is

BASIC SAFETY PRECAUTIONS SHOULD
ALWAYS BE FOLLOWED, INCLUDING THE
FOLLOWING:

READ ALL INSTRUCTIONS BEFORE
USING YOUR NINJA® KITCHEN SYSTEM
WITH AUTO-iQ™ TOTAL BOOST™.

POLARIZED PLUG

4 WARNING: Chopping Blade Assembly

WARNING: To reduce the risk of

electric shock, this appliance has a polarized
plug (one blade is wider than the other). This
plug will fit into a polarized outlet only one
way. If the plug does not fit fully into the

5 CAUTION: Do not blend hot liquids,

outlet, reverse the plug. If it still does not fit,
contact a qualified electrician to install the
proper outlet. DO NOT modify the plug in

6 CAUTION: We do not recommend

any way.

WARNING: Extension cords are

7 CAUTION: Remove the Pro Extractor

not recommended for use with this
product.

WARNING: TO REDUCE THE RISK OF

FIRE, ELECTRIC SHOCK OR INJURY:

1 WARNING: Remove utensils prior to

processing. Failure to remove may cause
the jar to be damaged or to shatter which
may cause personal injury.

2 WARNING: Blade assemblies are

sharp, not locked in place and removable,
handle with care. When handling the
blade assemblies, always hold by the
shaft. Failure to do so will result in a risk
of laceration.

8 To protect against electrical shock, do not

9 DO NOT allow children to operate the

sharp and not locked in place. If using
the pour spout, ensure the lid is fully
locked onto the pitcher. If pouring with
the lid removed, carefully remove the
Stacked Blade Assembly first, holding it
by the shaft. Failure to do so will result in
a risk of laceration.

is sharp and not locked in place. Before
emptying contents carefully remove lid
and Chopping Blade Assembly, holding it
by the shaft. Failure to do will result in
risk of laceration.

doing so may cause excessive pressure
build-up, resulting in risk of the user
being burned.

grinding in any of our Nutri Ninja cups.

Blades Assembly from the Nutri Ninja cup
upon completion of blending. Do not store
ingredients before or after blending them
in the cup with the blade assembly
attached. Some foods may contain active
ingredients or release gases that will
expand if left in a sealed container,
resulting in excessive pressure buildup
that can pose a risk of injury. For
ingredient storage in the cup, use only Sip
& Seal Lid to cover.

submerge the appliance or allow the power
cord to come into contact with water or any
other liquid.

appliance or use as a toy. Close supervision
is necessary when any appliance is used near
children.

1

1-877-646-5288

10 Never leave an appliance unattended when

inuse.

11 Appliance accessories are not intended to

be used in the microwave as it may result in
damage to the accessories.

12 Turn the appliance Off and remove the power

cord from the electrical outlet when not in use,
before assembling or disassembling parts and
before cleaning. To unplug, grasp the plug and
pull from the electrical outlet. Never pull from
the power cord.

13 DO NOT abuse the power cord. Never carry

the appliance by the power cord or yank it to
disconnect from electrical outlet; instead grasp
the plug and pull to disconnect.

14 DO NOT operate any appliance with a

damaged cord or plug, or after the appliance
malfunctions, has been dropped or damaged in
any manner. This appliance has no serviceable
parts. Return the appliance to SharkNinja
Operating LLC for examination, repair or
adjustment.

15 DO NOT let the power cord hang over the edge

of table or counter or touch hot surfaces such

as the stove.
16 Always use appliance on a dry, level surface.
17 Keep hands, hair, clothing, as well as utensils

out of container while processing to reduce the

risk of severe injury to persons or damage to

the appliance. A scraper may be used but only

when the appliance is not running.
18 Avoid contact with moving parts.
19 DO NOT attempt to sharpen blades.
20 DO NOT use the appliance if blade assembly is

bent or damaged.
21 To reduce risk of injury, never place the blade

assembly on base without pitcher or bowl

properly attached.

22 DO NOT operate this appliance on or near any

hot surfaces (such as gas or electric burner or
in a heated oven).

23 The use of attachments or accessories

including canning jars, not recommended by
the manufacturer may result in fire, electric
shock or personal injury.

24 DO NOT remove the container from the motor

base while the appliance is in operation.

25 To reduce the risk of injury, NEVER operate

the appliance without the lid in place; DO NOT
try to defeat the interlock mechanism; make
sure that the attachment is properly installed
before operating the appliance.

26 DO NOT expose containers to extreme

temperaturechanges.
27 DO NOT overfill.
28 DO NOT operate the appliance empty.
29 In the event that the unit overloads, the unit

will shut down. Unplug the appliance and let it

cool down for approximately 15 minutes before

using again.
30 THIS PRODUCT IS INTENDED FOR

HOUSEHOLD USE ONLY. Do not use this

appliance for anything other than its intended

use. Do not use outdoors.
31 The maximum rating is based on the Stacked

Blade Assembly (pitcher) that drives the

greatest power and other recommended

attachments may draw significantly less power

or current.

INSTRUCTIONS

SAVE THESE

www.ninjakitchen.com

2

THIS BOOK COVERS MODEL NUMBER:

BL687CO 30

TECHNICAL SPECIFICATIONS
Voltage: 120V~, 60Hz.
Power: 1500 Watts

Pitcher Capacity: 72 oz. (9 cups, 2.1 L)
Max Liquid Capacity: 64 oz. (8 cups, 1.9 L)

Bowl Capacity: 64 oz. (8 cups, 1.8 L)
Nutri Ninja® Cup Capacity:

24 oz. (3 cups, 710 ml)

18 oz. (2.25 cups, 532 ml)

3

1-877-646-5288

Contents

Thank you for
purchasing the
Ninja® Kitchen
System With
Auto-iQ™ Total
Boost™.

Getting to Know Your Ninja Kitchen System with Auto-iQ Total Boost ................................5

Before First Use ...........................................................................................................7

Assembly and Use of the Blender Pitcher .......................................................................8

Assembly and Use of the Processor Bowl ....................................................................10

Assembly and Use of the Nutri Ninja® Cups .................................................................12

Programs, Speed Settings & Uses ...............................................................................13

Care & Maintenance ..................................................................................................15

Troubleshooting Guide ................................................................................................16

Replacement Parts .....................................................................................................16

Warranty & Registration ..............................................................................................18

www.ninjakitchen.com

4

Getting To Know Your Ninja® Kitchen System with Auto-iQ™ Total Boost

™

a

e

i

b

c d

g

f

k

j

h

l

a 24 oz. Nutri Ninja® Cup (x2)
b 18 oz. Nutri Ninja® Cup
c Pro Extractor Blades® Assembly
d Sip & Seal® Lid (x3)

e Food Processor Bowl
f Food Processor Lid
g Dough Blade Assembly

(food processor)
h Chopping Blade Assembly

(food processor)

Note: Additional accessories are available for purchase at ninjakitchen.com

5

1-877-646-5288

i Pitcher
j Pitcher Lid
k Stacked Blade Assembly (blender)
l Motor Base

NOTE: Blades are not interchangeable.

The Ninja®
and outstanding performance, a true asset to any kitchen. The Ninja®

System with Auto-iQ™ Total Boost™ is a professional, high powered innovative tool with a sleek design

Kitchen

System with Auto-iQ™ Total Boost™ features

Kitchen

intelligent programs that provides unique pulsing, blending and pausing patterns that do the work for you! Get great results
every time with no guesswork required! For best results, be sure to carefully read all the instructions contained in the
manual before using this appliance.

Ninja®

System with Auto-iQ™ Total Boost™ Technology Features:

Kitchen

• 3 Auto-iQ™ programs - Puree, Frozen Drink/Smoothie, Extract

• Auto-iQ™ Total B oost™ - Control more than ever before - select BOOST “Yes” to achieve perfectly smooth mixtures, or
select BOOST “No” if you prefer more texture.

• 4 Manual Settings: Low/Dough, Medium, High & Pulse

• Patented Ninja® Blade Technology

• BPA Free Blender Pitcher (MAX Liquid Capacity: 64 oz.), Nutri Ninja® Cups, Food Processor Bowl and Lids

• Total Crushing® Technology

• LED Control Panel with Timer

• Sturdy, Non-Slip Base

• Smart Lid technology for easy release

• Nutri Ninja® Nutrient & Vitamin Extraction*

• Drip-Free Pour Spout

* Extract a drink containing vitamins and nutrients from fruits and vegetables.

www.ninjakitchen.com

6

Before First Use

PLEASE KEEP THESE IMPORTANT
SAFEGUARDS IN MIND WHEN USING THE
APPLIANCE:

IMPORTANT: Make sure that the motor base

is plugged in for use.

IMPORTANT: Never add ingredients into the

container before placing the attachment in
first.

IMPORTANT: Attachments are not

interchangeable.

IMPORTANT: DO NOT attempt to operate the

appliance without the lid on.

IMPORTANT: Never run the appliance empty.

IMPORTANT: Appliance accessories are not

intended to be used in the microwave as it
may result in damage to the accessories.

WARNING: Stacked
Blade Assembly is
sharp and not locked in
place. If using the pour
spout, ensure the lid
is fully locked onto the
pitcher. Failure to do so
will result in a risk of
laceration.

WARNING: Stacked
Blade Assembly is sharp
and not locked in place.
If pouring with the lid
removed, carefully
remove the Stacked
Blade Assembly first,
holding it by the shaft. Failure to do so
will result in a risk of laceration.

WARNING: Chopping
Blade Assembly is sharp and
not locked in place. Before
emptying contents carefully
remove lid and Chopping
Blade Assembly, holding it by
the shaft. Failure to do so will result in a
risk of laceration.

CAUTION: Do not immerse the motor base into

water or any other liquid.

1 Remove all packaging material and labels from the

appliance. Separate/remove all parts from each other.

2 Wash the lids, pitcher, food processor bowl, Nutri Ninja®

cups and blade assemblies in warm, soapy water. When
washing the blade assemblies, use a dish-washing
utensil with a handle to avoid direct hand contact with
blades.

WARNING: Handle the Blade Assemblies with care

when washing, as the blade are sharp.

3 Handle blade assemblies with care to avoid contact with

sharp edges. Rinse and air dry thoroughly.

4 The pitcher, food processor bowl, Nutri Ninja cups,

lids and blade assemblies, are all dishwasher safe. It
is recommended that the lids and blade assemblies be
placed on the top rack. Ensure that the blade assemblies
are removed from the cup, pitcher and processor bowl
before placing in the dishwasher.

5 Wipe the motor base clean with a damp cloth.

7

1-877-646-5288

Assembly and Use of the Pitcher

WARNING: Handle the Stacked Blade Assembly with care, as the blades are sharp.
WARNING: Remove utensils prior to processing. Failure to remove may cause the blender pitcher to be

damaged or to shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the

user being burned.

IMPORTANT: Make sure that the motor base is plugged in for use.

ASSEMBLY

Fig. 3a

OR

Fig. 5b

Fig. 1

1 Review warning and caution statements above before

proceeding to number 2.

2

Place the motor base on a clean, dry, level surface such as a

counter or table top. Press down on the motor base to make

sure that the suction cups adhere to the counter or table top

3 Align and lower the Pitcher onto the motor base.

(Fig. 1) Handle should be aligned slightly to the right of

the “LOCK” symbol on the motor base.

4 Rotate the pitcher clockwise until it locks in place, you

will hear a click when the lock is engaged. (Fig. 2)

5 The pitcher can be placed on the motor base two ways;

the handle can be on the front right corner or the front

left corner. (Fig. 3a, Fig. 3b)

6 Holding the Stacked Blade Assembly by the top of the

shaft, place it onto the drive gear inside the pitcher.

Ensure that the Stacked Blade Assembly is seated

properly and is standing upright. (Fig. 4)

NOTE: The Stacked Blade Assembly will fit loosely on

the drive gear.

7 Add the ingredients to the pitcher, making sure that

they do not exceed the highest measured marking line

on the side of the pitcher.

Fig. 2 Fig. 5a

Fig. 3b

Fig. 4

NOTE: If you need to add additional ingredients while

the appliance is processing, open the pour spout cap
and pour the ingredients in through the opening.

NOTE: When blending any kind of liquids, such as

mixtures of any drinks or smoothies, do not exceed the

.

“Max liquid” mark (64 ounces) on the pitcher

8 Holding the lid by the handle in the upright position, place

it on top of the pitcher aligning the triangle ( ) located on
the lid with the triangle ( ) located on the pitcher’s handle.
(Fig. 5a) Press the handle down until you hear a click.
The triangles on the lid and the blender handle MUST be
aligned in order for the blender to turn on. (Fig. 5b)

IMPORTANT: As a safety feature, the power light

( ) will flash and the motor will not work if the
pitcher and lid are not installed correctly. When
the pitcher and lid are installed properly, the
power light ( ) will be solid, indicating that the
appliance is ready for use.

9 Plug the power cord into the electrical outlet and press

the power button ( ).

www.ninjakitchen.com

8

Assembly and Use of the Pitcher - cont.

USE

Fig. 6

Fig. 7

10 Review warning and caution statements on page 8

before proceeding.

NOTE: Ninja® Kitchen System with Auto-iQ™ Total

Boost™ can sense which jar is on the motor base. The

available functions will illuminate depending on which

jar is placed on the motor base (Fig. 6). Some settings

will not be available for certain jars.

11 Press the power button to turn on the unit. Select

the speed or Auto-iQ program that best suits your

needs. The Auto-iQ program will stop the appliance

automatically at the end of the program. (Fig. 7)

NOTE: Pulse ingredients for even chopping by holding the

Pulse button until your desired consistency is reached.

12 To pause the appliance, press the selected speed or

Auto-iQ Program a second time. (Fig. 8)

13 When you have reached your desired consistency, stop

the appliance by pressing the power button ( ) and

wait for the blade to stop turning. (Fig. 8)

14 Turn the pitcher counter clockwise to remove and then

lift off the base. (Fig. 9)

Fig. 8

REMOVAL

Fig. 10

Fig. 9

CAUTION: Never insert your hands in the pitcher

as the Stacked Blade Assembly is sharp. Always
use a spatula to dislodge food that has stuck to
the sides of the pitcher.

15 Open the pour spout cap and use the spout to empty

liquid contents.

16 For thicker consistencies, remove the lid and Stacked

Blade Assembly carefully (by its shaft), then empty
contents from the container. To remove the lid, press the
release button on the lid and pull the lid handle up to a
90° angle ands lift the lid off the blender pitcher. (Fig. 10)

17 Make sure that the unit is unplugged when not in use.

18 To release the motor base from the counter or table

top, place your hands underneath both sides of the
motor base and gently pull the unit up and towards you.

(F ig . 11)

Fi g. 11

9

1-877-646-5288

Assembly and Use of the Processor Bowl

WARNING: Chopping Blade Assembly is sharp and not locked in place. Before emptying contents carefully

remove lid and Chopping Blade Assembly, holding it by the shaft. Failure to do will result in risk of

laceration.
WARNING: Remove utensils prior to processing. Failure to remove may cause the bowl to be damaged or to

shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the

user being burned.

IMPORTANT: Make sure that the motor base is plugged in for use.

ASSEMBLY

Fig. 3a

OR

Fig. 5b

Fig. 3bFig. 1 Fig. 2

1 Review warning and caution statements above before

proceeding to number 2.

2 Place the motor base on a clean, dry, level surface such

as a counter or table top.

to make sure that the suction cups adhere to the counter or

table top.

3 Align and lower the Processor Bowl onto the motor

base. (Fig. 1) Handle should be aligned slightly to the

right of the “LOCK” symbol on the motor base.

4 Rotate the bowl clockwise until it locks in place, you will

hear a click when the lock is engaged. (Fig. 2)

5 The bowl can be placed on the motor base two ways;

the handle can be on the front right corner or the front

left corner. (Fig. 3a, Fig. 3b)

6 Holding the desired blade assembly by the top of the

shaft, place it onto the drive gear inside the bowl.

Ensure that the blade assembly is seated properly and

is standing upright. (Fig. 4)

NOTE: The blade will fit loosely on the drive gear.

Press down on the motor base

Fig. 4 Fig. 5a

7 Add the ingredients to the bowl, making sure that they

do not exceed the highest measured marking line on
the side of the bowl.

NOTE: The 64 oz. bowl is not intended for blending

drinks. Do not overfill.

NOTE: To add liquids during blending, open the drizzle

hole on the top of the lid and pour the liquid slowly into
the mixture.

8 Holding the lid by the handle in the upright position,

place it on top of the Processor Bowl aligning the
triangle ( ) located on the lid with the triangle ( )
located on the Processor Bowl handle. (Fig. 5a) Press
the handle down until you hear a click. The triangles on
the lid and the Processor Bowl handle MUST be aligned
in order for the blender to turn on. (Fig. 5b)

9 Plug the power cord into the electrical outlet and press

the power button ( ).

IMPORTANT: As a safety feature, the power

button ( ) will flash and the motor will not work
if the bowl and lid are not installed correctly.
When the bowl and lid are installed properly, the
power but ton ( ) will be solid, indicating that the
appliance is ready for use.

www.ninjakitchen.com

10

Assembly and Use of the Processor Bowl - cont.

USE

Fig. 1

REMOVAL

Fig. 3 Fig. 4

USE

Fig. 2

USING THE CHOPPING BLADE ASSEMBLY

1 Review warning and caution statements on page 10 before

proceeding to number 2.

NOTE:

2 Holding the Chopping Blade Assembly by the shaft, place it

3 Add the ingredients and secure the bowl lid onto the bowl.

4 Plug the power cord into the electrical outlet and press on the

NOTE: Please refer to “Speed Settings & Uses” chart for

5 When you have reached your desired consistency, stop the

6 To remove the lid, press the release button on the lid and pull

7 Turn the bowl counter clockwise and lift it to remove it from

8 To release the motor base from the counter or table top, place

Ninja® Kitchen System with Auto-iQ™ Total
Boost™ can sense which jar is on the motor base. The
available functions will illuminate depending on which jar is
placed on the motor base. (Fig. 1) Some settings will not be
available for certain jars.

onto the gear shaft inside the bowl. Ensure that the Chopping
Blade Assembly fits around the gear shaft and that it is
standing straight. (Fig. 2)

(Fig. 2)

power button ( ). Select the speed or Auto-iQ program that
best suits your needs. Pulse ingredients for even chopping
by holding the Pulse button until your desired consistency is
reached.

suggested uses and speeds.

appliance by pressing the power button ( ) and wait for the
blade to stop turning. (Fig. 3)

the lid handle up to a 90° angle. (Fig.3)

the motor base. (Fig. 4)

your hands underneath both sides of the motor base and
gently pull the unit up and towards you. (Fig. 5)

Fig. 5

Fig. 6

USING THE DOUGH BLADE ASSEMBLY

1 Review warning and caution statements on page 10 before

proceeding to number 2.

NOTE:

2 Holding the Dough Blade Assembly by the shaft, place it onto

3 Add the ingredients and secure the bowl lid onto the bowl.
4 Plug the power cord into the electrical outlet and press on the

NOTE: Please refer to “Speed Settings & Uses” chart for

5 Once finished making dough, stop the appliance by pressing

6 To remove the lid, press the release button on the lid and pull

7 Turn the bowl counter clockwise and lift it to remove it from

8 To release the motor base from the counter or table top, place

Ninja® Kitchen System with Auto-iQ™ Total
Boost™ can sense which jar is on the motor base. The
available functions will illuminate depending on which jar is
placed on the motor base (Fig. 1). Some settings will not be
available for certain jars.

the gear shaft inside the bowl. Ensure that the Dough Blade
Assembly fits around the gear shaft and that it is standing
straight. (Fig. 6)

power button ( ). Select LOW/DOUGH on the control panel
and process until ingredients come together to form a mass.

suggested uses and speeds.

the power button ( ) and wait for the blade to stop turning.

the lid handle up to a 90° angle. (Fig. 3)

the motor base. (Fig. 4)

your hands underneath both sides of the motor base and
gently pull the unit up and towards you. (Fig. 5)

11

1-877-646-5288

Assembly and Use of the Nutri Ninja® Cups

WARNING: Handle the Pro Extractor Blades® Assembly with care, as the blades are sharp.
WARNING: Remove utensils prior to processing. Failure to remove may cause the Nutri Ninja cup to be damaged or to

shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the user being

burned.

CAUTION: Remove the Pro Extractor Blades Assembly from the Nutri Ninja cup upon completion of blending. Do not store

ingredients before or after blending them in the cup with the blade assembly attached. Some foods may contain active

ingredients or release gases that will expand if left in a sealed container, resulting in excessive pressure buildup that

can pose a risk of injury. For ingredient storage in the cup, use only Sip & Seal Lid to cover.

IMPORTANT: Make sure that the motor base is plugged in for use.

ASSEMBLY USE REMOVAL

Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5

NOTE: Ninja® Kitchen System with Auto-iQ™ Total B oost™
can sense which jar is on the motor base. The available
functions will illuminate depending on which jar is placed
on the motor base. Some settings will not be available for
certain jars.

1 Review warning and caution statements above before

proceeding to number 2.

2 Place the motor base on a clean, dry, level surface such as a

counter or table top. Press down on the motor base to make

sure that the suction cups adhere to the counter or table top.

3 Add ingredients to the Nutri Ninja cup.
4 Place the Pro Extractor Blades® Assembly onto the cup

and tightly screw it on clockwise until you have a good

seal. (Fig. 1)

5 Turn the Nutri Ninja cup upside down and place it onto

the motor base, aligning the tabs on the cup with the

motor base. Rotate the Nutri Ninja cup clockwise until

it locks in place, you will hear a click when the lock is

engaged. (Fig. 2)

6 Press the power button on, and select the speed or

Auto-iQ program that suits your needs. The Auto-iQ

program will stop the appliance automatically at the

end of the program. (Fig. 3)

7 To pause the appliance, press the selected speed or

Auto-iQ Program a second time.

8 Once you have reached your desired consistency, turn

the power button off. Turn the Nutri Ninja cup counter
clockwise and pull straight up to remove. (Fig. 4, Fig. 5)

NOTE: Do not overfill! To avoid spilling, do not add

ingredients past the “Max” liquid line.

9 Turn the cup upright and remove the Pro Extractor

Blades Assembly by twisting the blade assembly
counter clockwise. (Fig. 6)

10 Do not store blended contents with the Pro Extractor

Blade Assembly attached.

11 Place the Sip & Seal® lid onto the Nutri Ninja cup, twist

to seal and enjoy!

12 For storage, only use Sip & Seal lid to cover.
13 Be sure to store the Pro Extractor Blades Assembly

attached to an empty cup when not in use.

14 Make sure that the motor base is unplugged when

not in use.

15 To release the motor base from the

counter or table top, place your hands
underneath both sides of the motor
base and gently pull the unit up and
towards you.

www.ninjakitchen.com

Fig. 6

12

Programs, Speed Settings & Uses for the Pitcher

FUNCTION CONTAINER

Frozen Drinks /

Ice Crush

Pureeing Pitcher

* When blending soups, dips or sauces, make sure they’re cooled to room temperature first - Ninja®

containers are not intended for hot blending.

Pitcher

BLADE TYPE

Stacked Blade

Assembly

Stacked Blade

Assembly

SPEED or PROGRAM TYPE OF FOOD

Auto-iQ™ Frozen Drink/

Smoothie

Auto-iQ Puree

Programs, Speed Settings & Uses for the Food Processor Bowl

FUNCTION CONTAINER

Mincing

Kneading and
Dough Mixing

Processing

Emulsifying

Grinding

Grating

Chopping

Batters

* When blending soups, dips or sauces, make sure they’re cooled to room temperature first - Ninja®

containers are not intended for hot blending.

Food Processor

Bowl

Food Processor

Bowl

Food Processor

Bowl

Food Processor

Bowl

Food Processor

Bowl

Food Processor

Bowl

Food Processor

Bowl

Food Processor

Bowl

BLADE TYPE

Chopping

Blade

Assembly

Dough Blade

Assembly

Chopping

Blade

Assembly

Chopping

Blade

Assembly

Chopping

Blade

Assembly

Chopping

Blade

Assembly

Chopping

Blade

Assembly

Dough Blade

Assembly

SPEED or PROGRAM TYPE OF FOOD

Pulse

Low/Dough

Auto-iQ™ Puree

Low/Dough

Medium

High

Low/Dough

Medium

Medium Meat

Pulse

High

Pulse

Low/Dough

Ice

Frozen Drinks

Smoothies

Milkshakes

Sauces*

Dips*

Soups*

Onion
Garlic
Herbs

Bread Dough

Pie Dough

Pizza Dough
Pretzel Dough
Cookie Dough

Pâtés

Stewed Fruits

Dips*

Apple Sauce

Spreads

Salad Dressings

Sauces*

Grated Cheese
Bread Crumbs

Salsa

Vegetables

Nuts

Cake Mixes

Batters

13

1-877-646-5288

Programs, Speed Settings & Uses for the Nutri Ninja® Cup

FUNCTION CONTAINER

Smoothies Nutri Ninja Cup

Green Smoothies Nutri Ninja Cup

Grating Nutri Ninja Cup

Chopping Nutri Ninja Cup

BLADE TYPE

Pro Extractor

Blades®

Assembly

Pro Extractor

Blades

Assembly

Pro Extractor

Blades

Assembly

Pro Extractor

Blades

Assembly

SPEED or PROGRAM TYPE OF FOOD

Auto-iQ™ Frozen Drink/

Smoothie

Auto-iQ Extract

Pulse

High

Pulse

High

Smoothies

Protein Drinks

Frozen Fruits

Frozen Vegetables

Kale

Celery

Spinach

Seeds

Ice

Grated Cheese
Bread Crumbs

Salsa

Vegetables

www.ninjakitchen.com

14

Care & Maintenance

HOW TO CLEAN

CAUTION: Make sure that the motor base is

unplugged from the power source before inserting
or removing any attachment and before cleaning.

CAUTION: DO NOT immerse the motor base into

water or any other liquid.

CAUTION: Use caution when handling the blade

assemblies as the blades are sharp.

1 Separate/remove all parts from each other.

2 Hand Washing: Wash the containers, lids, blade

assemblies and attachments in warm, soapy water. When
washing the blade assemblies, use a dish-washing utensil
with a handle to avoid direct hand contact with blades.
Handle blade assemblies with care to avoid contact with
sharp edges. Rinse and air dry thoroughly.

Dishwasher: The containers, lids, blade assemblies and

attachments are all dishwasher safe. The lids and blade
assemblies are top rack dishwasher safe. Ensure that the
blade assemblies are removed from the containers before
placing in the dishwasher.

WARNING: Handle the Stacked Blade Assembly,

Chopping Blade Assembly and Pro Extractor
Blades® Assembly with care when washing, as the
blades are sharp. Contact with the blades’ edges
can result in laceration.

3 Wipe the motor base clean with a damp cloth.

Please call customer service if any servicing needs to be

performed on the appliance at 1-877-646-5288.

ADDITIONAL CLEANING INSTRUCTIONS

FOR THE NINJA PRO EXTRACTOR BLADES®
ASSEMBLY

When washing the Pro Extractor Blades Assembly, do

not attempt to remove the seal. Removing the seal can
cause damage to the seal which can result in improper
reassembly and leaking.

If the blade seal becomes loose, please call customer

service at 1-877-646-5288.

HOW TO STORE

Store the

NOTE: Do not store blended or unblended

Ninja® Kitchen System with Auto-iQ™
Total B oost™ upright with the blade assembly inside
the corresponding container with the lid secured on
top. Do not place anything on top. Store the rest of
the attachments in a safe place where they will not be
damaged and won’t cause harm. Loosely wrap the power
cord around the motor base.

ingredients in the Nutri Ninja Cup with the blade
assembly attached.

RESETTING THE MOTOR THERMOSTAT

The Ninja Kitchen System with Auto-iQ Total Boost

features a unique safety system which prevents
damage to the unit’s motor and drive system should you
inadvertently overload your appliance. If the appliance

is being overloaded, the motor will stop. Allow
the appliance to cool for approximately 15
minutes. To reset the appliance, follow the resetting

procedure below:

1

Unplug the appliance from the electrical outlet.

2

Remove and empty the container and ensure that no

food is jamming the cutting blade assemblies.

3

Allow the appliance to cool for approximately 15

minutes.

4

Re-install the container onto the base and re-plug the

appliance into the electrical outlet.

5

Proceed to use the appliance as before making sure not
to exceed the recommended maximum capacities.

15

1-877-646-5288

Troubleshooting Guide

PROBLEMS POSSIBLE REASONS & SOLUTIONS

Motor Doesn’t Start or Blade
Assembly Doesn’t Rotate.

Make sure the container is securely locked on the motor base.

Make sure the lid is securely on the container in the correct position (align
arrows).

The appliance is turned “Off”. Press the power button ( ) to turn “On”.

Check that the plug is securely inserted into the electrical outlet.

Check the fuse or circuit breaker.

The unit has overloaded or overheated. Unplug and wait approximately 15

minutes before using again.

Check to make sure the unit is not overloaded.

Food is Unevenly Chopped.

Food is Chopped Too Fine or is
Too Watery.

Food Collects On Lid or On the
Sides of the Container.

You Cannot Achieve Snow
From Solid Ice.

Motor Base Won’t Stick to
Counter or Table Top.

You get an “Err” Message.

You have a blinking red light.

Either you are chopping too much food at one time, or the pieces are not of
even size and processing smaller amounts per batch.

The food has been over processed. Use Pulse button for controlled
processing.

The mixture is too thick. Add more liquid.

Do not use ice that has been sitting out or has started to melt. Use ice
straight from the freezer.

Start with a few pulses and then go to a continuous blending cycle.

Make sure surface and suction feet are wiped clean. Suction feet will only
stick to smooth surfaces. Suction feet WILL NOT stick on some surfaces
such as, wood, tile and non-polished finishes.

DO NOT attempt to use appliance when the motor base is stuck to a
surface that is not secure, (cutting board, platter, plates, etc.).

Your Ninja® is able to detect which jar is on the base. You may be trying
to use a program that is not designed for the jar you have installed. The
programs will light up indicating which programs are available for each jar.

The unit is not installed properly. For your safety the unit will only be able to
be turned on when it is properly assembled. Please refer to the assembly
pages of this inspiration guide for assistance.

Replacement Parts

ORDERING REPLACEMENT PARTS

To order additional parts and attachments, please visit our website: www.ninjakitchen.com
or feel free to contact customer service: 1-877-646-5288.

www.ninjakitchen.com

16

Notes

17

1-877-646-5288

ONE (1) YEAR LIMITED WARRANTY

SharkNinja Operating LLC warrants this product to be free from material defects and workmanship for a period of one (1)

year from the date of purchase when utilized for normal household use, subject to the following conditions, exclusions and
exceptions.

The liability of SharkNinja Operating LLC is limited solely to the cost of the repair or replacement of the unit at our option.
This Limited Warranty does not cover normal wear of parts and does not apply to any unit that has been tampered with or
used for commercial purposes. This Limited Warranty does not cover damage caused by misuse, abuse, negligent handling or
damage due to faulty packaging or mishandling in transit. This Limited Warranty does not cover damage or defects caused by
or resulting from damages from shipping or repairs, service or alteration to the product or any of its parts, which have been
performed by a repair person not authorized by SharkNinja Operating LLC.

If your appliance fails to operate properly while in use under normal household conditions within the Limited Warranty period,
you may return the complete appliance and accessories with proof of purchase and date, freight prepaid. For Customer Service
support, call 1-877-646-5288 or visit our website www.ninjakitchen.com.

If the appliance is found by SharkNinja Operating LLC to be defective, in SharkNinja Operating LLC’s sole discretion, we
will repair or replace it free of charge. Proof of purchase date and a check made payable to SharkNinja Operating LLC in the
amount of $19.95 to cover the cost of return shipping and handling must be included.*

This Limited Warranty is extended to the original purchaser of the unit and excludes all other legal, implied and/or conventional
warranties. The responsibility of SharkNinja Operating LLC if any, is limited to the specific obligations expressly assumed
by it under the terms of this Limited Warranty. In no event is SharkNinja Operating LLC liable for incidental or consequential
damages to anyone of any nature whatsoever. Some states do not permit the exclusion or limitation of incidental or
consequential damages, so the above may not apply to you.

This Limited Warranty gives you specific legal rights, and you may also have other rights which vary from state to state or from
province to province.

*IMPORTANT: Carefully pack item to avoid damage in shipping. Be sure to include proof of purchase date and

to attach tag to item before packing with your name, complete address and phone number with a note giving

purchase information, model number and what you believe is the problem with the item. We recommend you

insure the package (as damage in shipping is not covered by your Limited Warranty). Mark the outside of your

package “ATTENTION CUSTOMER SERVICE”.

PRODUCT REGISTRATION

Please visit www.ninjakitchen.com or call 1-877-646-5288 to register your new Ninja® product within ten (10) days of
purchase. You will be asked to provide the store name, date of purchase and model number along with your name and address.

The registration will enable us to contact you in the unlikely event of a product safety notification. By registering you
acknowledge to have read and understood the instructions for use, and warnings set forth in the accompanying instructions.

www.ninjakitchen.com

18

SharkNinja Operating LLC
US: Newton, MA 02459
CAN: Ville St-Laurent, QC H4S 1A7

1-877-646-5288

www.ninjakitchen.com

Copyright © 2016 SharkNinja Operating LLC

Ninja, Pro Extractor Blades, Sip & Seal, and Total Crushing are registered trademarks of SharkNinja Operating LLC.
Auto-iQ and Total Boost are trademarks of SharkNinja Operating LLC.

Printed in China
Illustrations may differ from actual product. We are constantly striving to improve our products, therefore the

specifications contained herein are subject to change without notice.
For SharkNinja U.S. Patent information visit www.sharkninja.com/USPatents.

BL687CO_30_IB_E_160613_5