Ninja BL680A User Manual

Download

Page 1

BL680A

OWNER’S GUIDE

www.ninjakitchen.com

Page 2

IMPORTANT SAFETY INSTRUCTIONS

For Household Use Only

WHEN USING ELECTRICAL APPLIANCES, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED, INCLUDING THE FOLLOWING:

READ ALL INSTRUCTIONS BEFORE

USING YOUR NUTRI NINJA

NINJA® BLENDER SYSTEM WITH AUTO-iQ™ TECHNOLOGY.

POLARIZED PLUG

WARNING: To reduce the risk of

electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will ﬁt into a polarized outlet only one way. If the plug does not ﬁt fully into the outlet, reverse the plug. If it still does not ﬁt, contact a qualiﬁed electrician to install the proper outlet. DO NOT modify the plug in

any way.

WARNING: Extension cords are not

recommended for use with this product.

WARNING: TO REDUCE THE RISK OF

FIRE, ELECTRIC SHOCK OR INJURY:

1 CAUTION: Blade assemblies are sharp

and removable, handle with care. When handling the blade assemblies, always hold by the shaft.

CAUTION: DO NOT BLEND HOT FOODS

OR HOT LIQUIDS.

CAUTION: We do not recommend

grinding in any of our Nutri Ninja® Cups.

4 To protect against electrical shock, do not

submerge the appliance or allow the power cord to come into contact with water or any other liquid.

5 DO NOT allow young children to operate the

appliance or use as a toy. Close supervision is necessary when any appliance is used by or near children.

6 Never leave an appliance unattended when

inuse.

7 Appliance accessories are not intended to

be used in the microwave as it may result in damage to the accessories.

8 Turn the appliance Off and remove the power

cord from the electrical outlet when not in use, before assembling or disassembling parts and before cleaning. To unplug, grasp the plug and pull from the electrical outlet. Never pull from the power cord.

9 DO NOT abuse the power cord. Never carry

the appliance by the power cord or yank it to disconnect from electrical outlet; instead grasp the plug and pull to disconnect.

1-877-646-5288

Page 3

10 DO NOT operate any appliance with a

damaged cord or plug, or after the appliance malfunctions, has been dropped or damaged in any manner. This appliance has no serviceable parts. Return the appliance to EURO-PRO Operating LLC for examination, repair or adjustment.

11 DO NOT let the power cord hang over the

edge of table or counter or touch hot surfaces

such as the stove. 12 Always use appliance on a dry, level surface. 13 Keep hands, hair, clothing, as well as utensils

out of container while processing to reduce

the risk of severe injury to persons or damage

to the appliance. A scraper may be used but

only when the appliance is not running. 14 Avoid contact with moving parts. 15 DO NOT attempt to sharpen blades. 16 DO NOT use the appliance if blade assembly

is bent or damaged. 17 To reduce risk of injury, never place the blade

assembly on base without pitcher or bowl

properly attached. 18 DO NOT operate this appliance on or near any

hot surfaces (such as gas or electric burner or

in a heated oven). 19 The use of attachments or accessories

including canning jars, not recommended by

the manufacturer may result in ﬁre, electric

shock or personal injury. 20 DO NOT remove the container from the motor

base while the appliance is in operation.

21 To reduce the risk of injury, NEVER operate

the appliance without the lid in place; DO NOT try to defeat the interlock mechanism; make sure that the attachment is properly installed before operating the appliance.

22 DO NOT expose containers to extreme

temperaturechanges. 23 DO NOT overﬁll. 24 DO NOT operate the appliance empty. 25 To reduce the risk of burns, always allow the

appliance to cool before taking off parts and

before cleaning. 26 In the event that the unit overloads, the

control panel lights will ﬂash and the unit

will shut down. Unplug the appliance and let

it cool down for approximately 15 minutes

before using again. 27 THIS PRODUCT IS INTENDED FOR

HOUSEHOLD USE ONLY. Do not use this

appliance for anything other than its intended

use. Do not use outdoors. 28 The maximum rating is based on the 6-Blade

Assembly (pitcher) that drives the greatest

power and other recommended attachments

may draw signiﬁcantly less power or current.

SAVE THESE

INSTRUCTIONS

www.ninjakitchen.com

Page 4

THIS BOOK COVERS MODEL NUMBERS:

BL680A 30

TECHNICAL SPECIFICATIONS Voltage: 120V~, 60Hz.

Power: 1500 Watts Pitcher Capacity: 72 ounces (9 cups, 2.1 L)

MAX Liquid Capacity: 64 ounces (8 cups, 1.8 L) Bowl Capacity: 64 ounces (8 cups, 1.8 L) Nutri Ninja

Cup Capacity: 24 ounces ( 3 cups, 710 mL)

32 ounces (4 cups, 950 mL)

Euro-Pro, Nutri-Ninja, Total Crushing and Ninja are registered trademarks of Euro-Pro Operating LLC.

Sip & Seal, Pro Extr actor Blades and Auto-iQ are trademarks of Euro-Pro Operating LLC.

1-877-646-5288

Page 5

Contents

Thank you for purchasing the Nutri Ninja® | Ninja® Blender System with Auto-iQ™ Technology.

Getting to Know Your Nutri Ninja® | Ninja® Blender System with Auto-iQ™ Technology ......5

Using the Nutri Ninja® | Ninja® Kitchen Blender System with Auto-iQ™ Technology ...........7

Assembly and Use for the Ninja® Blender ......................................................................8

Assembly and Use for the Food Processor ...................................................................10

Assembly and Use for the Nutri Ninja® Cups ................................................................12

Speed Settings & Uses ...............................................................................................13

Care & Maintenance ..................................................................................................15

Troubleshooting Guide ................................................................................................16

Replacement Parts .....................................................................................................16

Warranty & Registration ..............................................................................................18

www.ninjakitchen.com

Page 6

Getting To Know Your Nutri Ninja® | Ninja® Blender System with Auto-iQ™ Technology

c d e

a Jumbo Multi-Serve 32 oz. Nutri

Ninja® Cup

b Regular 24 oz. Nutri Ninja® Cup (x2) c Pro Extractor Blades

™

d Sip & Seal™ Lids (x3) e Silicone Grip Sleeve (x3)

1-877-646-5288

f Food Processor Bowl g Food Processor Lid h Dough Blade (food processor) i Chopping Blade (food processor)

j Blender Pitcher k Blender Lid l Stacked Blades (blender) m Motor Base

NOTE: Blades are not

interchangeable.

Page 7

The Nutri Ninja® | Ninja® Blender System with Auto-iQ™ Technology is a professional, high powered innovative tool with a sleek design and outstanding performance, a true asset to any kitchen. The Nutri Ninja® | Ninja® Blender System with Auto-iQ™ Technology features intelligent programs that provides unique pulsing, blending and pausing patterns that do the work for you! Get great results every time with no guesswork required! For best results, be sure to carefully read all the instructions contained in the manual before using this appliance.

Nutri Ninja® | Ninja® Blender System with Auto-iQ™ Technology Features:

• 5Auto-iQ™ settings - Auto-iQ™ Frozen Drinks/Smoothies, Auto-iQ™ Food Puree, Nutri Ninja® Auto-iQ™ Blend,

Nutri Ninja® Auto-iQ™ Ultra Blend and Auto-iQ™ Pulse

• PatentPendingNinja

• BPAFreeBlenderPitcher(MAXLiquidCapacity:64oz.),NutriNinja

• TotalCrushing

• LEDControlPanelwithTimer

• Sturdy,Non-SlipBase

• SmartLidtechnologyforeasyrelease

• 3speeds:Low/ Dough,Medium,&High

• NutriNinja

• Drip-FreePourSpout

Blade Technology

Technology

Nutrient & Vitamin Extraction

Cups, Food Processor Bowl and Lids

www.ninjakitchen.com

Page 8

Using the Nutri Ninja® | Ninja® Blender System with Auto-iQ™ Technology

PLEASE KEEP THESE IMPORTANT SAFEGUARDS IN MIND WHEN USING THE APPLIANCE:

WARNING: Never leave the appliance

unattended while in use

CAUTION: DO NOT PROCESS HOT FOODS

OR HOT LIQUIDS.

CAUTION: Never remove the container

while the appliance is still running.

IMPORTANT: Never add ingredients

into the container before placing the bladein ﬁrst.

IMPORTANT: Blades are not

interchangeable.

IMPORTANT: DO NOT attempt to operate

the appliance without the lid on.

IMPORTANT: Never run the

applianceempty.

IMPORTANT: Appliance accessories

are not intended to be used in the microwave as it may result in damage to the accessories.

CAUTION: Blades

are not locked in place. If using the pour spout, ensure the lid is fully locked onto the blender pitcher.

CAUTION: Blades

are not locked in place. If pouring with the lid removed, ALWAYS remove the blade assembly ﬁrst.

CAUTION: Blade assemblies are sharp, not locked in place and removable, handle with care. When handling the blade assemblies, always hold them by the shaft.

BEFORE FIRST USE

1 Remove all packaging material and labels from the

appliance.

2 Wash the lids, blender pitcher, food processor bowl,

Nutri Ninja a soft cloth.

CAUTION: Handle the the blade assemblies with

care when washing, as the blades are very sharp.

3 Rinse and dry thoroughly.

4 The blender pitcher, food processor bowl, Nutri Ninja

cups, lids and blades, are all dishwasher safe. It is recommended that the lids and blades be placed on the top rack. Ensure that the blades are removed from the containers before placing in the dishwasher.

5 Wipe the motor base clean with a damp cloth.

cups and blades in warm, soapy water with

1-877-646-5288

Page 9

Assembly and Use for the Blender

HIGH

PULSE

LOW

DOUGH

SMOOTHIE

SINGLE SERVE

PUREE

FROZEN BLENDING

WARNING: Never leave the appliance unattended while in use.

CAUTION: Use caution when handling the blade assemblies as the blades are very sharp.

IMPORTANT: Make sure that the motor base is plugged in for use.

ASSEMBLY

Fig. 1

LOW / DOUGH

MED

Fig. 4a

1 Holding the Stacked Blade Assembly by the top of the

shaft, place it onto the drive gear inside the pitcher. Ensure that the attachment is seated properly and is standing upright. (Fig. 1)

NOTE: The blade will ﬁt loosely on the drive gear.

2 Place the motor base on a clean, dry, level surface such as a

counter or table top. Press down on the motor base to make sure that the suction cups adhere to the counter or table top.

3 Align and lower the Pitcher onto the motor base.

(Fig. 2) Handle should be aligned slightly to the right of the “LOCK” symbol on the motor base.

4 Rotate the pitcher clockwise until it locks in place, you

will hear a click when the lock is engaged. (Fig. 3)

5 The pitcher can be placed on the motor base two ways;

the handle can be on the front right corner or the front left corner. (Fig. 4a, Fig. 4b)

6 Add the ingredients to the pitcher, making sure that

they do not exceed the highest measured marking line on the side of the pitcher.

Fig. 2

Fig. 4b

Fig. 3

Fig. 5a

NOTE: If you need to add additional ingredients while

the appliance is processing, open the pour spout cap and pour the ingredients in through the opening.

NOTE: When blending any kind of liquids, such as

mixtures of any drinks or smoothies, do not exceed the “Max liquid” mark (64 ounces) on the pitcher

7 Holding the lid by the handle in the upright position, place

it on top of the pitcher aligning the triangle ( ) located on the lid with the triangle ( ) located on the pitcher’s handle. (Fig. 5a) Press the handle down until you hear a click. The triangles on the lid and the blender handle MUST be aligned in order for the blender to turn on. (Fig. 5b)

8 Plug the power cord into the electrical outlet and press

the power button ( ).

IMPORTANT: As a safety feature, the power light

( ) will ﬂash and the motor will not work if the pitcher and lid are not installed correctly. When the pitcher and lid are installed properly, the power light ( ) will be solid, indicating that the appliance is ready for use.

Fig. 5b

www.ninjakitchen.com

Page 10

Assembly and Use for the Blender - cont.

USE REMOVAL

Fig. 6

Fig. 10

Fig. 7

WARNING: Never leave the appliance unattended

while in use.

NOTE: Nutri Ninja® | Ninja® Blender System with Auto-

iQ™ Technology can sense which jar is on the motor base. The function lights will illuminate depending on which jar is placed on the motor base. (Fig. 6)

9 Press the power button to turn on the unit. Select

the speed or Auto-iQ™ program that best suits your needs. The Auto-iQ™ program will stop the appliance automatically at the end of the program. (Fig. 7)

NOTE: Pulse ingredients for even chopping by

holding the Auto-iQ™ Pulse button until your desired consistency is reached.

10 To pause the appliance, press the selected speed or

Auto-iQ™ Program a second time. (Fig. 8)

11 When you have reached your desired consistency, stop

the appliance by pressing the power button ( ) and wait for the blade to stop turning. (Fig. 8)

12 Turn the pitcher counter clockwise to remove and then

lift off the base. (Fig. 9)

Fig. 8

Fig. 9

CAUTION: Never insert your hands in the pitcher as the

blades are sharp. Always use a spatula to dislodge food that has stuck to the sides of the pitcher.

13 Depending on the consistency of the contents in the

container, open the pour spout cap and use the spout to empty liquid contents.

CAUTION: Blades are not locked in place. If using

the pour spout, ensure the lid is fully locked onto the blender pitcher.

14 For thicker consistencies, remove the lid and blade

attachment carefully (by its shaft), then empty contents from the container. To remove the lid, press the release button on the lid and pull the lid handle up to a 90° angle ands lift the lid off the blender pitcher. (Fig. 10)

CAUTION: Blades are not locked in place. If

pouring with the lid removed, ALWAYS remove the blade assembly ﬁrst.

15 Make sure that the unit is unplugged when not in use.

16 To release the motor base from the counter or table

top, place your hands underneath both sides of the motor base and gently pull the unit up and towards you.

(F ig . 11)

Fi g. 11

1-877-646-5288

Page 11

Assembly and Use for the Processor Bowl

MED

LOW / DOUGH

WARNING: Never leave the appliance unattended while in use.

CAUTION: Use caution when handling the blade assemblies as the blades are very sharp.

IMPORTANT: Make sure that the motor base is plugged in for use.

ASSEMBLY

LOW /

DOUGH

MED

Fig. 5a Fig. 5b

NOTE: Nutri Ninja® | Ninja® Blender System with Auto-

iQ™ Technology can sense which jar is on the motor base. The function lights will illuminate depending on which jar is placed on the motor base. ( Fig. 1)

1 Holding the desired blade by the top of the shaft, place

it onto the drive gear inside the bowl. Ensure that the attachment is seated properly and is standing upright.

(Fig. 2)

NOTE: The blade will ﬁt loosely on the drive gear.

CAUTION: Blades are not locked in place

2 Place the motor base on a clean, dry, level surface such as a

counter or table top. Press down on the motor base to make sure that the suction cups adhere to the counter or table top.

3 Align and lower the Processor Bowl onto the motor

base. (Fig. 3) Handle should be aligned slightly to the right of the “LOCK” symbol on the motor base.

4 Rotate the bowl clockwise until it locks in place, you will

hear a click when the lock is engaged. (Fig. 4)

5 The bowl can be placed on the motor base two ways;

the handle can be on the front right corner or the front left corner. (Fig. 5a, Fig. 5b)

Fig. 2

Fig. 3Fig. 1

Fig. 4

Fig. 6b

Fig. 6a

6 Add the ingredients to the bowl, making sure that they

do not exceed the highest measured marking line on the side of the bowl.

7 Holding the lid by the handle in the upright position,

place it on top of the Processor Bowl aligning the triangle ( ) located on the lid with the triangle ( ) located on the Processor Bowl handle. (Fig. 6a) Press the handle down until you hear a click. The triangles on the lid and the Processor Bowl handle MUST be aligned in order for the blender to turn on. (Fig. 6b)

NOTE: The 64 oz. bowl is not intended for blending

drinks. Do not overﬁll.

NOTE: To add liquids during blending, open the drizzle

hole on the top of the lid and pour the liquid slowly into the mixture.

8 Plug the power cord into the electrical outlet and press

the power button ( ).

IMPORTANT: As a safet y feature, the power

button ( ) will ﬂash and the motor will not work if the bowl and lid are not installed correctly. When the bowl and lid are installed properly, the power but ton ( ) will be solid, indicating that the appliance is ready for use.

www.ninjakitchen.com

Page 12

Assembly and Use for the Processor Bowl - cont.

WARNING: Never leave the appliance unattended while in use.

CAUTION: Use caution when handling the blade assemblies as the blades are very sharp.

USE

Fig. 1

Fig. 2 Fig. 3 Fig. 4

REMOVAL

USING THE CHOPPING BLADE ASSEMBLY

1 Holding the Chopping Blade assembly by the shaft,

place it onto the gear shaft inside the bowl. Ensure that the attachment ﬁts around the gear shaft and that it is standing straight.

2 Add the ingredients and secure the bowl lid onto the

bowl. (Fig. 1)

3 Plug the power cord into the electrical outlet and press

on the power button ( program that best suits your needs. Pulse ingredients for even chopping by holding the Auto-iQ™ Pulse button until your desired consistency is reached.

NOTE: Please refer to “Speed Settings & Uses” chart

for suggested uses and speeds.

4 When you have reached your desired consistency, stop

the appliance by pressing the power button ( wait for the blade to stop turning. (Fig. 2)

5 To remove the lid, press the release button on the lid

and pull the lid handle up to a 90° angle. (Fig. 2)

6 Turn the bowl counter-clockwise and lift it to remove it

from the motor base. (Fig. 3)

CAUTION: If pouring from the bowl, ALWAYS

remove the blade assembly ﬁrst before pouring.

7 To release the motor base from the counter or table top,

place your hands underneath both sides of the motor base and gently pull the unit up and towards you.

(Fig. 4)

). Select the speed or Auto-iQ™

) and

USE

Fig. 5

USING THE DOUGH BLADE

1 Holding the dough blade by the shaft, place it onto the

gear shaft inside the bowl. Ensure that the attachment ﬁts around the gear shaft and that it is standing straight.

(Fig. 5)

2 Add the ingredients and secure the bowl lid onto the bowl. 3 Plug the power cord into the electrical outlet and press

on the power button ( ). Select LOW/DOUGH on the control panel and process until ingredients come together to form a mass.

NOTE: Please refer to “Speed Settings & Uses” chart

for suggested uses and speeds.

4 Once ﬁnished making dough, stop the appliance by

pressing the power button ( stop turning.

5 To remove the lid, press the release button on the lid

and pull the lid handle up to a 90° angle. (Fig. 2)

6 Turn the bowl counter-clockwise and lift it to remove it

from the motor base. (Fig. 3)

7 To release the motor base from the counter or table top,

place your hands underneath both sides of the motor base and gently pull the unit up and towards you.

(Fig. 4)

) and wait for the blade to

1-877-646-5288

Page 13

Assembly and Use for the Nutri Ninja® Cups

WARNING: Never leave the appliance unattended while in use.

CAUTION: Use caution when handling the blade assemblies as the blades are very sharp.

IMPORTANT: Make sure that the motor base is plugged in for use.

ASSEMBLY USE REMOVAL

Fig. 1

Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6

NOTE: Nutri Ninja® | Ninja® Blender System with Auto-iQ™ Technology can sense which jar is on the motor base. The function lights will illuminate depending on which jar is placed on the motor base. (Fig. 1)

1 Place the motor base on a clean, dry, level surface such as a

counter or table top. Press down on the motor base to make sure that the suction cups adhere to the counter or table top.

2 Add ingredients to the Nutri Ninja

3 Place the Pro Extractor Blades

cup.

™

onto the cup and tightly

screw it on clockwise until you have a good seal. (Fig. 2)

4 Turn the Nutri Ninja

cup upside down and place it onto the motor base, aligning the tabs on the cup with the motor base. Rotate the Nutri Ninja® cup clockwise until it locks in place, you will hear a click when the lock is engaged. (Fig. 3)

5 Press the power button on, and select the speed or

™

Auto-iQ

program that suits your needs. The Auto-iQ™ program will stop the appliance automatically at the end of the program. (Fig. 4)

6. To pause the appliance, press the selected speed or Auto-iQ™ Program a second time.

7 Once you have reached your desired consistency, turn

the power button off. Turn the Nutri Ninja

clockwise and pull straight up to remove. (Fig. 5, Fig. 6)

NOTE: Do not over ﬁll! To avoid spilling, do not add

ingredients past the “Max” liquid line.

8 Turn the cup upright and remove the Pro Extractor

™

Blades

by twisting the blade assembly counter

clockwise.

9 Place the Sip & Seal

™

lid onto the Nutri Ninja® cup,

twist to seal and enjoy!

10 Make sure that the motor base is unplugged when

not in use.

11 To release the motor base

from the counter or table top, place your hands underneath both sides of the motor base and gently pull the unit up and towards you. (Fig. 7)

www.ninjakitchen.com

cup counter-

Fig. 7

Page 14

Programs, Speed Settings & Uses for the Blender Pitcher

FUNCTION CONTAINER

Frozen Drinks /

Ice Crush

Blender Pitcher Stacked Blade

BLADE

TYPE

Pureeing Blender Pitcher Stacked Blade Auto-iQ

SPEED or

PROGRAM

Auto-iQ™ Frozen Drinks/

Smoothies

™

Food Puree Soups

Programs, Speed Settings & Uses for the Food Processor Bowl

FUNCTION CONTAINER

Mincing

Kneading and Dough Mixing

Processing

Emulsifying

Grinding

Grating

Chopping

Batters

Food Processor

Bowl

Food Processor

Bowl

Food Processor

Bowl

Food Processor

Bowl

Food Processor

Bowl

Food Processor

Bowl

Food Processor

Bowl

Food Processor

Bowl

BLADE

TYPE

Chopping

Blade

Dough Blade Low/Dough

Chopping

Blade

Chopping

Blade

Chopping

Blade

Chopping

Blade

Chopping

Blade

Dough Blade Low/Dough

SPEED or

PROGRAM

Auto-iQ™ Pulse

™

Food Puree

Auto-iQ

Low/Dough

Medium

High

Low/Dough

Medium

Medium Meat

™

Pulse

Auto-iQ

High

™

Pulse

Auto-iQ

TYPE OF FOOD

Ice

Frozen Drinks

Smoothies

Milkshakes

TYPE OF FOOD

Onion Garlic Herbs

Bread Dough

Pie Dough

Pizza Dough Pretzel Dough Cookie Dough

Pâtés

Stewed Fruits

Dips

Apple Sauce

Spreads

Salad Dressings

Sauces

Grated Cheese

Bread Crumbs

Salsa

Vegetables

Nuts

Cake Mixes

Batters

1-877-646-5288

Page 15

Programs, Speed Settings & Uses for the Nutri Ninja® Cup

FUNCTION CONTAINER

Smoothies Nutri Ninja® Cup

Green Smoothies Nutri Ninja

Grating Nutri Ninja

Chopping Nutri Ninja

Cup

BLADE

TYPE

Pro Extractor

™

Blades

Pro Extractor

™

Blades

Pro Extractor

™

Blades

Pro Extractor

™

Blades

SPEED or

PROGRAM

Nutri Ninja® Auto-iQ™

Blend

Nutri Ninja® Auto-iQ™

Ultra Blend

Auto-iQ™ Pulse

High

Auto-iQ™ Pulse

High

TYPE OF FOOD

Smoothies

Protein Drinks

Frozen Fruits

Frozen Vegetables

Kale

Celery

Spinach

Seeds

Ice

Grated Cheese Bread Crumbs

Salsa

Vegetables

www.ninjakitchen.com

Page 16

Care & Maintenance

HOW TO CLEAN

CAUTION: Make sure that the motor base is

unplugged from the power source before inserting or removing any attachment and before cleaning.

CAUTION: DO NOT immerse the motor base into

water or any other liquid.

CAUTION: Use caution when handling the blade

assemblies as the blades are very sharp.

1 Separate/remove all parts from each other.

2 Clean the motor base with a damp cloth and wipe dry.

3 Place the blender pitcher, Nutri Ninja

processor bowl in the dishwasher. Place the lids and attachments on the top rack.

4 Carefully hand wash the lids, blender pitcher, food

processor bowl, Nutri Ninja warm, soapy water with a soft cloth.

Please call customer service if any servicing needs to be

performed on the appliance at 1-877-646-5288.

cup and food

cups and blade assemblies in

HOW TO STORE

1 Store the

Nutri Ninja® | Ninja® Blender System with

™

Auto-iQ

Technology

upright with the pitcher on the motor base, 6-Blade assembly inside the pitcher and lid on the pitcher. Do not place anything on top. Store the bowl with the 4-Blade assembly inside and the lid on top. S the Nutri Ninja® cup and the rest of the attachments along side the appliance or in a cabinet where they will not be damaged and won’t cause a hazard.

RESETTING THE MOTOR THERMOSTAT

The Nutri Ninja® | Ninja® Blender System with

Unplug the appliance from the electrical outlet.

Remove and empty the container and ensure that no

Allow the appliance to cool for approximately 15

Re-install the container onto the base and re-plug the

™

Technology features a unique safety system

Auto-iQ which prevents damage to the unit’s motor and drive system should you inadvertently overload your appliance. If the appliance is being overloaded,

the motor will stop. Allow the appliance to cool for approximately 15 minutes. To reset the

appliance, follow the resetting procedure below:

food is jamming the cutting blades or attachments.

minutes.

appliance into the electrical outlet.

Proceed to use the appliance as before making sure not to exceed the recommended maximum capacities.

tore

1-877-646-5288

Page 17

Troubleshooting Guide

PROBLEMS POSSIBLE REASONS & SOLUTIONS

Motor Doesn’t Start or Attachment Doesn’t Rotate.

Food is Unevenly Chopped.

Make sure the container is securely locked on the motor base.

Make sure the lid is securely on the container in the correct position (align arrows).

The appliance is turned “Off”. Press the power button (

Check that the plug is securely inserted into the electrical outlet.

Check the fuse or circuit breaker.

The unit has overloaded. The appliance will stop and the power light will ﬂash. Unplug and wait approximately 15 minutes before using again.

The unit has overheated. Unplug and wait approximately 15 minutes before using again.

Check to make sure the unit is not overloaded.

Either you are chopping too much food at one time, or the pieces are not of even size and processing smaller amounts per batch.

) to turn “On”.

Food is Chopped Too Fine or is Too Watery.

Food Collects On Lid or On the Sides of the Container.

You Cannot Achieve Snow From Solid Ice.

Motor Base Won’t Stick to Counter or Table Top.

You get an “Err” Message

You have a blinking red light

The food has been over processed. Use Auto-iQ™ Pulse button for controlled processing.

The mixture is too thick. Add more liquid.

Do not use ice that has been sitting out or has started to melt. Use ice straight from the freezer.

Start with a few pulses and then go to a continuous blending cycle.

Make sure surface and suction feet are wiped clean. Suction feet will only stick to smooth surfaces. Suction feet WILL NOT stick on some surfaces such as, wood, tile and non-polished ﬁnishes.

DO NOT attempt to use appliance when the motor base is stuck to a surface that is not secure, (cutting board, platter, plates, etc.).

Your Ninja® is able to detect which jar is on the base. You may be trying to use a program that is not designed for the jar you have installed. The programs will light up indicating which programs are available for each jar.

The unit is not installed properly. For your safety the unit will only be able to be turned on when it is properly assembled. Please refer to the assembly pages of this inspiration guide for assistance.

Replacement Parts

ORDERING REPLACEMENT PARTS

To order additional parts and attachments, please visit our website: www.ninjakitchen.com or feel free to contact customer service: 1-877-646-5288.

www.ninjakitchen.com

Page 18

Notes

1-877-646-5288

Page 19

ONE (1) YEAR LIMITED WARRANTY

EURO-PRO Operating LLC warrants this product to be free from material defects and workmanship for a period of one (1)

year from the date of purchase when utilized for normal household use, subject to the following conditions, exclusions and exceptions.

The liability of EURO-PRO Operating LLC is limited solely to the cost of the repair or replacement of the unit at our option. This Limited Warranty does not cover normal wear of parts and does not apply to any unit that has been tampered with or used for commercial purposes. This Limited Warranty does not cover damage caused by misuse, abuse, negligent handling or damage due to faulty packaging or mishandling in transit. This Limited Warranty does not cover damage or defects caused by or resulting from damages from shipping or repairs, service or alteration to the product or any of its parts, which have been performed by a repair person not authorized by EURO-PRO Operating LLC.

If your appliance fails to operate properly while in use under normal household conditions within the warranty period, return the complete appliance and accessories, freight prepaid. For assistance with warranty service options or customer support, please call our customer care and product specialists at , call 1-877-646-5288 or visit our website www.ninjakitchen.com.

If the appliance is found to be defective in material or workmanship, EURO-PRO Operating LLC will repair or replace it free of charge. Proof of purchase is required and a fee of $19.95 will apply to cover the cost of return freight. *

This Limited Warranty is extended to the original purchaser of the unit and excludes all other legal, implied and/or conventional warranties. The responsibility of EURO-PRO Operating LLC if any, is limited to the speciﬁc obligations expressly assumed by it under the terms of this Limited Warranty. In no event is EURO-PRO Operating LLC liable for incidental or consequential damages to anyone of any nature whatsoever. Some states do not permit the exclusion or limitation of incidental or consequential damages, so the above may not apply to you.

This Limited Warranty gives you speciﬁc legal rights, and you may also have other rights which vary from state to state or from province to province.

*IMPORTANT: Carefully pack item to avoid damage in shipping. Be sure to include proof of purchase date and to attach tag to item before packing with your name, complete address and phone number with a note giving purchase information, model number and what you believe is the problem with the item. We recommend you insure the package (as damage in shipping is not covered by your Limited Warranty). Mark the outside of your package “ATTENTION CUSTOMER SERVICE”.

Product Registration

Please visit www.ninjakitchen.com or call 1-877-646-5288 to register your new Ninja® product within ten (10) days of purchase. You will be asked to provide the store name, date of purchase and model number along with your name and address.

The registration will enable us to contact you in the unlikely event of a product safety notiﬁcation. By registering you acknowledge to have read and understood the instructions for use, and warnings set forth in the accompanying instructions.

www.ninjakitchen.com

Page 20

Euro-Pro Operating LLC

US: Newton, MA 02459

CAN: Ville St-Laurent, QC H4S 1A7

1-877-646-5288

www.ninjakitchen.com

Euro-Pro, Nutri-Ninja, Total Crushing and Ninja are registered trademarks of Euro-Pro Operating LLC.

Sip & Seal, Pro Extr actor Blades and Auto-iQ are trademarks of Euro-Pro Operating LLC.

Illustr ations may differ from ac tual product. We are con stantly s triving to improve our products, therefore the specifications contained herein are subject to change without notice.

Printed in China

BL680A_30_IB_E _2C_150323_1

Ninja BL680A User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual