Ninja BL680A Owner's Manual

BL680A

®

OWNER’S GUIDE

ninjakitchen.com

1 877 646-5288

IMPORTANT SAFETY INSTRUCTIONS

For Household Use Only

WHEN USING ELECTRICAL APPLIANCES,
BASIC SAFETY PRECAUTIONS SHOULD
ALWAYS BE FOLLOWED, INCLUDING THE
FOLLOWING:

READ ALL INSTRUCTIONS BEFORE
USING YOUR NUTRI NINJA® | NINJA®
BLENDER WITH AUTO-iQ™ TECHNOLOGY.

POLARIZED PLUG

WARNING: To reduce the risk

of electric shock, this appliance has a
polarized plug (one blade is wider than
the other). This plug will fit into a
polarized outlet only one way. If the
plug does not fit fully into the outlet,
reverse the plug. If it still does not fit,
contact a qualified electrician to install
the proper outlet. DO NOT modify the
plug in any way.

WARNING: Extension cords are not

recommended for use with this product.

1 2

WARNING:

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR
INJURY:

1 WARNING: Remove utensils prior to

processing. Failure to remove may cause the
jar to be damaged or to shatter which may
cause personal injury.

2 WARNING: The blade assemblies are

sharp, not locked in place and removable,
handle with care. When handling the blade
assemblies, always hold by the shaft.
Failure to do so will result in a risk of
laceration.

3 WARNING: Stacked Blade Assembly is

sharp and not locked in place. If using the
pour spout, ensure the lid is fully locked
onto the pitcher. If pouring with the lid
removed, carefully remove the Stacked
Blade Assembly first, holding it by the shaft.
Failure to do so will result in a risk of
laceration.

4 WARNING: Chopping Blade Assembly is

sharp and not locked in place. Before
emptying contents carefully remove lid and
Chopping Blade Assembly, holding it by the
shaft. Failure to do so will result in a risk of
laceration.

5 CAUTION: Do not blend hot liquids, doing

so may cause excessive pressure build-up,
resulting in risk of the user being burned.

6 CAUTION: We do not recommend grinding

in any of our Nutri Ninja

7 CAUTION: Remove the Pro Extractor

Blades® Assembly from the Nutri Ninja cup
upon completion of blending. Some
ingredients have the potential to expand
after blending resulting in excessive
pressure buildup that can pose a risk of
injury.

®

Cups.

8 To protect against electrical shock, do not

submerge the appliance or allow the power cord
to come into contact with water or any other
liquid.

9 DO NOT allow the appliance to be used by

children. Close attention is necessary when used
near children. This is not a toy.

10 Never leave an appliance unattended when in

use.

11 Appliance accessories are not intended to be

used in the microwave as it may result in damage
to the accessories.

12 Turn the appliance Off and remove the power

cord from the electrical outlet when not in use,
before assembling or disassembling parts and
before cleaning. To unplug, grasp the plug and
pull from the electrical outlet. Never pull from the
power cord.

13 DO NOT abuse the power cord. Never carry

the appliance by the power cord or yank it to
disconnect from electrical outlet; instead grasp
the plug and pull to disconnect.

14 DO NOT operate any appliance with a damaged

cord or plug, or after the appliance malfunctions,
has been dropped or damaged in any manner.
This appliance has no serviceable parts. Return
the appliance to SharkNinja Operating LLC for
examination, repair or adjustment.

15 DO NOT let the power cord hang over the edge of

table or counter or touch hot surfaces such as the

stove.
16 Always use appliance on a dry, level surface.
17 Keep hands, hair, clothing, as well as utensils

out of container while processing to reduce the

risk of severe injury to persons or damage to the

appliance. A scraper may be used but only when

the appliance is not running.
18 Avoid contact with moving parts.
19 DO NOT attempt to sharpen blades.
20 DO NOT use the appliance if blade assemblies

are bent or damaged.

21 To reduce risk of injury, never place the blade

assemblies on the base without the pitcher or
Nutri Ninja cup properly attached.

22 DO NOT operate this appliance on or near any

hot surfaces (such as gas or electric burner or in
a heated oven).

23 The use of attachments or accessories

including canning jars, not recommended by the
manufacturer may result in fire, electric shock or
personal injury.

24 DO NOT remove the container from the motor

base while the appliance is in operation.

25 To reduce the risk of injury, NEVER operate the

appliance without the lid in place; DO NOT try
to defeat the interlock mechanism; make sure
that the attachment is properly installed before
operating the appliance.

26 DO NOT expose containers to extreme

temperature changes.
27 DO NOT overfill.
28 DO NOT operate the appliance empty.
29 To reduce the risk of burns, always allow the

appliance to cool before taking off parts and

before cleaning.
30 In the event that the unit overloads, the control

panel lights will flash and the unit will shut down.

Unplug the appliance and let it cool down for

approximately 15 minutes before using again.
31 THIS PRODUCT IS INTENDED FOR

HOUSEHOLD USE ONLY. Do not use this

appliance for anything other than its intended

use. Do not use outdoors.
32 The maximum rating is based on the Stacked

Blade Assembly (pitcher) that drives the greatest

power and other recommended attachments may

draw significantly less power or current.

SAVE THESE
INSTRUCTIONS

www.ninjakitchen.com1-877-646-5288

Contents

Thank you for
purchasing the
Nutri Ninja® |
Ninja® Blender
System with
Auto-iQ™
Technology.

Getting to Know Your Nutri Ninja® | Ninja® Blender System with Auto-iQ™ Technology ......5

Before First Use ...........................................................................................................7

Assembly and Use of the Pitcher ...................................................................................8

Assembly and Use of the Food Processor ....................................................................10

Assembly and Use of the Nutri Ninja® Cups .................................................................12

Speed Settings & Uses ...............................................................................................13

Care & Maintenance ..................................................................................................15

Troubleshooting Guide ................................................................................................16

Replacement Parts .....................................................................................................16

Warranty & Registration ..............................................................................................18

THIS BOOK COVERS MODEL NUMBER:

BL680A

TECHNICAL SPECIFICATIONS
Voltage: 120V~, 60Hz.

Power: 1500 Watts

Pitcher Capacity: 72 oz. (9 cups, 2.1 L)
MAX Liquid Capacity: 64 oz. (8 cups, 1.9 L)

Bowl Capacity: 64 oz. (8 cups, 1.8 L)

Nutri Ninja® Cup Capacity: 24 oz. ( 3 cups, 710 mL)
32 oz. (4 cups, 950 mL)

3 4

www.ninjakitchen.com1-877-646-5288

Getting To Know Your Nutri Ninja® | Ninja® Blender System with Auto-iQ™ Technology

a

b

c d e

The Nutri Ninja® | Ninja® Blender System with Auto-iQ™ Technology is a professional, high powered innovative tool with
a sleek design and outstanding performance, a true asset to any kitchen. The Nutri Ninja | Ninja Blender System with
Auto-iQ Technology features intelligent programs that provides unique pulsing, blending and pausing patterns that do the
work for you! Get great results every time with no guesswork required! For best results, be sure to carefully read all the
instructions contained in the manual before using this appliance.

f

Nutri Ninja | Ninja Blender System with Auto-iQ Technology Features:

• 5 Auto-iQ™ settings - Auto-iQ Frozen Drinks/Smoothies, Auto-iQ Food Puree, Nutri Ninja Auto-iQ Blend,

h

g

i

Nutri Ninja Auto-iQ Ultra Blend and Auto-iQ Pulse

• Ninja Blade Technology

• BPA Free Pitcher (MA X Liquid Capacity: 64 oz.), Nutri Ninja Cups, Food Processor Bowl and Lids

• Total Crushing® Technology

• LED Control Panel with Timer

• Sturdy, Non-Slip Base

j

• Smart Lid technology for easy release

• 3 speeds: Low/Dough, Medium, & High

l

• Nutri Ninja Nutrient & Vitamin Extraction*

• Drip-Free Pour Spout

k

m

* Extract a drink containing vitamins and nutrients from fruits and vegetables

a Jumbo Multi-Serve 32 oz. Nutri

Ninja® Cup

b Regular 24 oz. Nutri Ninja® Cup (x2)
c Pro Extractor Blades® Assembly
d Sip & Seal® Lids (x3)

f Food Processor Bowl
g Food Processor Lid
h Dough Blade Assembly
i Chopping Blade Assembly

j Pitcher
k Pitcher Lid with Locking Handle
l Stacked Blade Assembly
m Motor Base
n Power Cord (not shown)

e Silicone Grip Sleeve (x3)

5 6

www.ninjakitchen.com1-877-646-5288

Before First Use

PLEASE KEEP THESE IMPORTANT
SAFEGUARDS IN MIND WHEN USING THE
APPLIANCE:

IMPORTANT: Make sure that the motor base

is plugged in for use.

IMPORTANT: Never add ingredients into the

container before placing the blade assembly
in first.

IMPORTANT: Blade assemblies are not

interchangeable.

IMPORTANT: DO NOT attempt to operate the

appliance without the lid on.

IMPORTANT: Never run the appliance empty.

IMPORTANT: Appliance accessories are not

intended to be used in the microwave as it
may result in damage to the accessories.

WARNING: Stacked
Blade Assembly is sharp
and not locked in place.
If using the pour spout,
ensure the lid is fully
locked onto the blender
pitcher. Failure to do so
will result in a risk of
laceration.

WARNING: Stacked
Blade Assembly is sharp
and not locked in place.
If pouring with the lid
removed, carefully
remove the Stacked
Blade Assembly first,
holding it by the shaft. Failure to do so
will result in a risk of laceration.

WARNING: Chopping
Blade Assembly is sharp and
not locked in place. Before
emptying contents carefully
remove lid and Chopping
Blade Assembly, holding it by
the shaft. Failure to do so will result in a
risk of laceration.

CAUTION:

water or any other liquid.

1 Remove all packaging material and labels from the

appliance. Separate/remove all parts from each other.

2 Wash the lids, pitcher, food processor bowl, Nutri

Ninja® cups and Blade Assemblies in warm, soapy
water. When washing the blade assemblies, use a
dish-washing utensil with a handle to avoid direct hand
contact with blades.

CAUTION: Handle the Blade Assemblies with care

when washing, as the blades are very sharp.

3 Handle blade assemblies with care to avoid contact

with sharp edges. Rinse and air dry thoroughly.

4 The pitcher, food processor bowl, Nutri Ninja® cups,

lids, and Blade Assemblies, are all dishwasher safe.
It is recommended that the lids and blade assemblies
be placed on the top rack. Ensure that the blade
assemblies are removed from the containers before
placing in the dishwasher.

5 Wipe the motor base clean with a damp cloth.

Do not immerse the motor base into

Assembly and Use of the Pitcher

WARNING: Handle the Stacked Blade Assembly with care, as the blades are sharp.
WARNING: Remove utensils prior to processing. Failure to remove may cause the pitcher to be damaged or

to shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the

user being burned.

IMPORTANT: Make sure that the motor base is plugged in for use.

ASSEMBLY

Fig. 3a

OR

Fig. 5aFig. 4Fig. 3bFig. 1 Fig. 2

It’s best to add the liquid ingredients first and then the dry ingredients.

It’s best to add the liquid ingredients first and then the dry ingredients.

1 Review warning and caution statements above before

proceeding to number 2.

2 Place the motor base on a clean, dry, level surface such

as a counter or table top. Press down on the motor

base to make sure that the Suction Cups adhere to the

counter or table top.

3 Align and lower the Pitcher onto the motor base.

(Fig. 1) Handle should be aligned slightly to the right of

the “LOCK” symbol on the motor base.

4 Rotate the pitcher clockwise until it clicks in place. As

the pitcher rotates, it will lower and the safety tabs on

the bottom of the pitcher will slide under the safety tabs

on the top of the motor base. (Fig. 2)

5 The pitcher can be placed on the motor base two ways;

the handle can be on the front right corner or the front

left corner. (Fig. 3a, Fig. 3b)

6 Holding the Stacked Blade Assembly by the top of the

shaft, place it onto the drive gear inside the pitcher.

Ensure that the Stacked Blade Assembly is seated

properly and is standing upright. (Fig. 4)

NOTE: The Stacked Blade Assembly will fit loosely on

the drive gear.

7 Add the ingredients to the pitcher, making sure that

they do not exceed the highest measured marking line
on the side of the pitcher.

NOTE: If you need to add additional ingredients while

the appliance is processing, open the pour spout cap
and pour the ingredients in through the opening.

NOTE: When blending any kind of liquids, such as

mixtures of any drinks or smoothies, do not exceed the
“MAX” liquid mark (1.9 L) on the Pitcher.

8 Holding the lid by the handle in the upright position,

place it on top of the Pitcher aligning the triangle
( ) located on the lid with the triangle ( ) located on
the Pitcher’s handle. (Fig. 5a) Press the handle down
until you hear a click. The triangles on the lid and
the blender handle MUST be aligned in order for the
blender to turn on. (Fig. 5b)

IMPORTANT: As a safety feature, the power light

( ) will flash and the motor will not work if the
Pitcher and lid are not installed correctly. When
the Pitcher and lid are installed properly, the
power light ( ) will be solid, indicating that the
appliance is ready for use.

9 Plug the power cord into the electrical outlet and press

the power button ( ).

7 8

www.ninjakitchen.com1-877-646-5288

Assembly and Use of the Pitcher - cont.

MED

LOW /
DOUGH

USE REMOVAL

Fig. 6

Assembly and Use of the Food Processor

WARNING: Chopping Blade Assembly is sharp and not locked in place. Before emptying contents carefully

remove lid and Chopping Blade Assembly, holding it by the shaft. Failure to do will result in risk of

laceration.
WARNING: Remove utensils prior to processing. Failure to remove may cause the bowl to be damaged or to

shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the

user being burned.

CAUTION: Remove the lid from the bowl upon completion of processing. Some ingredients have the potential

to expand after blending resulting in excessive pressure buildup that can pose a risk of injury.

IMPORTANT: Make sure that the motor base is plugged in for use.

ASSEMBLY

Fig. 10

Fig. 1

Fig. 4a

OR

Fig. 7

Fig. 8

10 Review warning and caution statements on page 8

before proceeding.

NOTE: Nutri Ninja® | Ninja® Blender with Auto-iQ™

Technology can sense which jar is on the motor base.
The available function lights will illuminate depending
on which jar is placed on the motor base. (Fig. 6)

11 Press the power button to turn on the unit. Select

the speed or Auto-iQ program that best suits your
needs. The Auto-iQ program will stop the appliance
automatically at the end of the program. (Fig. 7)

NOTE: Pulse ingredients for even chopping by holding

the Auto-iQ Pulse button until your desired consistency
is reached.

12 To pause the appliance, press the selected speed or

Auto-iQ program a second time. When the program is
paused, the light on the program button will flash until
you press it again to resume the rest of the program.

13 When you have reached your desired consistency, stop

the appliance by pressing the power button ( ) and
wait for the blade to stop turning. (Fig. 8)

14 Turn the pitcher counter clockwise to remove and then

lift off the base. (Fig. 9)

Fig. 9

Fi g. 11

WARNING: Never insert your hands in the pitcher

as the Stacked Blade Assembly is sharp. Always
use a spatula to dislodge food that has stuck to
the sides of the pitcher.

15 Open the pour spout cap and use the spout to empty

liquid contents.

16 For thicker consistencies, first remove the lid by

pressing the release button and pulling the lid handle
up to a 90 degree angle to lift lid off the pitcher. Then,
carefully remove the Stacked Blade Assembly by the
top of the shaft. Place Stacked Blade Assembly away
from the work area to avoid accidental contact. Finally,
empty contents from the pitcher. (Fig . 10)

17 Make sure that the unit is unplugged when not in use.

18 To release the motor base from the counter or table top,

place your hands underneath both sides of the motor
base and gently pull the unit up and towards you.

(F ig . 11)

NOTE: Nutri Ninja® | Ninja® Blender System with Auto-

iQ™ Technology can sense which jar is on the motor
base. The function lights will illuminate depending on
which jar is placed on the motor base. ( Fig. 1)

1 Review warning and caution statements above before

proceeding to number 2.

2 Place the motor base on a clean, dry, level surface such as a

counter or table top. Press down on the motor base to make

sure that the suction cups adhere to the counter or table top.

3 Holding the desired blade assembly by the top of the

shaft, place it onto the drive gear inside the bowl.

Ensure that the blade assembly is seated properly and

is standing upright. (Fig. 2)

NOTE: The blade will fit loosely on the drive gear.

3 Align and lower the Processor Bowl onto the motor

base. (Fig. 3) Handle should be aligned slightly to the

right of the “LOCK” symbol on the motor base.

4 Rotate the bowl clockwise until it locks in place, you will

hear a click when the lock is engaged. (Fig. 4)

5 The bowl can be placed on the motor base two ways;

the handle can be on the front right corner or the front

left corner. (Fig. 5a, Fig. 5b)

Fig. 6b

Fig. 5 Fig. 6aFig. 2 Fig. 4bFig. 3

6 Add the ingredients to the bowl, making sure that they

do not exceed the highest measured marking line on
the side of the bowl.

7 Holding the lid by the handle in the upright position,

place it on top of the Processor Bowl aligning the
triangle ( ) located on the lid with the triangle ( )
located on the Processor Bowl handle. (Fig. 6a) Press
the handle down until you hear a click. The triangles on
the lid and the Processor Bowl handle MUST be aligned
in order for the blender to turn on. (Fig. 6b)

NOTE: The 64 oz. bowl is not intended for blending

drinks. Do not overfill.

8 Plug the power cord into the electrical outlet and press

the power button ( ).

NOTE: As a safet y feature, the power button ( ) will

flash and the motor will not work if the bowl and lid
are not installed correctly. When the bowl and lid
are installed properly, the power button ( ) will be
solid, indicating that the appliance is ready for use.

9 10

www.ninjakitchen.com1-877-646-5288

Assembly and Use of the Food Processor - cont.

REMOVALUSE

CHOPPING BLADE

ASSEMBLY

Fig. 2 Fig. 3 Fig. 5Fig. 1 Fig. 4

USE

DOUGH BLADE

ASSEMBLY

Assembly and Use of the Nutri Ninja® Cups

WARNING: Handle the Pro Extractor Blades® Assembly with care, as the blades are sharp.
WARNING: Remove utensils prior to processing. Failure to remove may cause the Nutri Ninja cup to be

damaged or to shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the

user being burned.

CAUTION: Remove the Pro Extractor Blades Assembly from the cup upon completion of blending. Some

ingredients have the potential to expand after blending resulting in excessive pressure buildup that can

pose a risk of injury.

IMPORTANT: Make sure that the motor base is plugged in for use.

ASSEMBLY USE REMOVAL

Fig. 1

USING THE CHOPPING BLADE ASSEMBLY

1 Review warning and caution statements on page 10

before proceeding to number 2.

2 Place the motor base on a clean, dry, level surface such

as a counter or table top. Press down on the motor
base to make sure that the suction cups adhere to the
counter or table top.

3 Secure the bowl onto the motor base.
4 Holding the Chopping Blade Assembly by the shaft,

place it onto the gear shaft inside the bowl. Ensure that
the Chopping Blade Assembly fits around the gear shaft
and that it is standing straight. (Fig. 1)

5 Add the ingredients and secure the bowl lid onto the

bowl.

6 Plug the power cord into the electrical outlet and press

on the power button ( ). Select the speed or Auto-iQ™
program that best suits your needs. Pulse ingredients
for even chopping by holding the Auto-iQ Pulse button
until your desired consistency is reached.

NOTE: Please refer to “Speed Settings & Uses” chart

for suggested uses and speeds.

7 When you have reached your desired consistency, stop

the appliance by pressing the power button ( ) and
wait for the blade to stop turning. (Fig. 2)

8 To remove the lid, press the release button on the lid

and pull the lid handle up to a 90° angle. (Fig. 2)

9 Turn the bowl counter-clockwise and lift it to remove it

from the motor base. (Fig. 3)

10 To release the motor base from the counter or table top,

place your hands underneath both sides of the motor
base and gently pull the unit up and towards you.

(Fig. 4)

11 12

USING THE DOUGH BLADE ASSEMBLY

1 Review warning and caution statements on page 10

before proceeding to number 2.

2 Place the motor base on a clean, dry, level surface such

as a counter or table top. Press down on the motor
base to make sure that the suction cups adhere to the
counter or table top.

3 Secure the bowl onto the motor base.
4 Holding the Dough Blade Assembly by the shaft, place

it onto the gear shaft inside the bowl. Ensure that the
Dough Blade Assembly fits around the gear shaft and
that it is standing straight. (Fig. 5)

5 Add the ingredients and secure the bowl lid onto the

bowl.

6 Plug the power cord into the electrical outlet and press

on the power button ( ). Select the LOW/DOUGH
button and process until ingredients come together to
form a mass.

NOTE: Please refer to “Speed Settings & Uses” chart

for suggested uses and speeds.

7 Once finished making dough, stop the appliance by

pressing the power button ( ) and wait for the blade to
stop turning.

8 To remove the lid, press the release button on the lid

and pull the lid handle up to a 90° angle. (Fig. 2)

9 Turn the bowl counter-clockwise and lift it to remove it

from the motor base. (Fig. 3)

10 To release the motor base from the counter or table top,

place your hands underneath both sides of the motor
base and gently pull the unit up and towards you.

(Fig. 4)

Fig. 2 Fig. 3

NOTE: Nutri Ninja® | Ninja® Blender with Auto-iQ™ Technology

can sense which jar is on the motor base. The available

function lights will illuminate depending on which jar is placed

on the motor base. (Fig. 1)

1 Review warning and caution statements above before

proceeding to number 2.

2 Place the motor base on a clean, dry, level surface such as a

counter or table top. Press down on the motor base to make

sure that the suction cups adhere to the counter or table top.

3 Add ingredients to the Nutri Ninja cup.

4 Place the Pro Extractor Blades® onto the cup and tightly

screw it on clockwise until you have a good seal. (Fig. 2)

5 Turn the Nutri Ninja cup upside down and place it onto the

motor base, aligning the tabs on the cup with the motor base.

Rotate the Nutri Ninja cup clockwise until it locks in place, you

will hear a click when the lock is engaged. (Fig. 3)

6 Press the power button on, and select the speed or Auto-iQ

program that suits your needs. (Fig. 4) The Auto-iQ program

will stop the appliance automatically at the end of the

program.

Fig. 4 Fig. 5 Fig. 6

7 To pause the appliance, press the selected speed or Auto-iQ

program a second time. When the program is paused, the
light on the program button will flash until you press it again
to resume the rest of the program.

8 Once you have reached your desired consistency, stop the

appliance by pressing the power button and wait for the blade
to stop turning. Turn the Nutri Ninja cup counter-clockwise
and pull straight up to remove. (Fig. 5, Fig. 6)

NOTE: Do not overfill! To avoid spilling, do not add ingredients

past the “Max Liquid” line.

9 Turn the cup upright and remove the Pro Extractor Blades by

twisting the Pro Extractor Blades counter clockwise.

10 Place the Sip & Seal® lid onto the Nutri Ninja cup, twist to seal

and enjoy!

11 Make sure that the motor base is unplugged when not in use.

12 To release the motor base from the

counter or table top, place your hands
underneath both sides of the motor
base and gently pull the unit up and
towards you.

www.ninjakitchen.com1-877-646-5288

Programs, Speed Settings & Uses for the Pitcher

Programs, Speed Settings & Uses for the Nutri Ninja® Cup

FUNCTION CONTAINER

Frozen Drinks /

Ice Crush

Pureeing Pitcher

* When blending soups or sauces, make sure they’re cooled to room temperature first - Ninja® containers

are not intended for hot blending.

Pitcher

BLADE

TYPE

Stacked Blade

Assembly

Stacked Blade

Assembly

SPEED or

PROGRAM

Auto-iQ™ Frozen Drinks/

Smoothies

Auto-iQ Food Puree Soups*

Programs, Speed Settings & Uses for the Food Processor Bowl

FUNCTION CONTAINER

Mincing

Kneading and
Dough Mixing

Processing

Emulsifying

Grinding

Grating

Chopping

Batters

Food Processor

Bowl

Food Processor

Bowl

Food Processor

Bowl

Food Processor

Bowl

Food Processor

Bowl

Food Processor

Bowl

Food Processor

Bowl

Food Processor

Bowl

BLADE

TYPE

Chopping

Blade

Assembly

Dough Blade

Assembly

Chopping

Blade

Assembly

Chopping

Blade

Assembly

Chopping

Blade

Assembly

Chopping

Blade

Assembly

Chopping

Blade

Assembly

Dough Blade

Assembly

SPEED or

PROGRAM

Auto-iQ Pulse

Low/Dough

Auto-iQ Food Puree

Low/Dough

Medium

High

Low/Dough

Medium

Medium Meat

Auto-iQ Pulse

High

Auto-iQ Pulse

Low/Dough

TYPE OF FOOD

Ice

Frozen Drinks

Smoothies

Milkshakes

TYPE OF FOOD

Onion
Garlic
Herbs

Bread Dough

Pie Dough

Pizza Dough
Pretzel Dough
Cookie Dough

Pâtés

Stewed Fruits

Dips

Apple Sauce

Spreads

Salad Dressings

Sauces*

Grated Cheese

Bread Crumbs

Salsa

Vegetables

Nuts

Cake Mixes

Batters

FUNCTION CONTAINER

Smoothies Nutri Ninja® Cup

Green Smoothies Nutri Ninja Cup

Grating Nutri Ninja Cup

Chopping Nutri Ninja Cup

BLADE

TYPE

Pro Extractor

Blades®

Assembly

Pro Extractor

Blades

Assembly

Pro Extractor

Blades

Assembly

Pro Extractor

Blades

Assembly

SPEED or

PROGRAM

Nutri Ninja Auto-iQ™

Blend

Nutri Ninja Auto-iQ Ultra

Blend

Auto-iQ Pulse

High

Auto-iQ Pulse

High

TYPE OF FOOD

Smoothies

Protein Drinks

Frozen Fruits

Frozen Vegetables

Kale

Celery

Spinach

Seeds

Ice

Grated Cheese

Bread Crumbs

Salsa

Vegetables

* When blending soups or sauces, make sure they’re cooled to room temperature first - Ninja containers

are not intended for hot blending.

13 14

www.ninjakitchen.com1-877-646-5288

Care & Maintenance

Troubleshooting Guide

HOW TO CLEAN

CAUTION: Make sure that the motor base is

unplugged from the power source before inserting
or removing any blade assembly and before
cleaning.

CAUTION: DO NOT immerse the motor base into

water or any other liquid.

1 Separate/remove all parts from each other.

2

Hand Washing: Wash the lids, pitcher, food processor

bowl, Nutri Ninja® cup, and blade assemblies in warm,
soapy water. When washing the blade assemblies, use
a dish-washing utensil with a handle to avoid direct
hand contact with blades. Handle blade assemblies
with care to avoid contact with sharp edges. Rinse and
air dry thoroughly.

Dishwasher: The containers, lids, blade assemblies

and attachments are all dishwasher safe. The lids
and blade assemblies are top rack dishwasher safe.
Ensure that the blade assemblies are removed from the
containers before placing in the dishwasher.

WARNING: Handle the Blade Assemblies with

care when washing, as the blades are sharp.
Contact with the blades’ edges can result in
laceration.

3

Wipe the motor base clean with a damp cloth

Please call customer service if any servicing needs to be

performed on the appliance at 1-877-646-5288.

.

HOW TO STORE

1 Store the

Nutri Ninja® | Ninja® Blender System with
Auto-iQ™ Technology
inside the corresponding container with the lid secured
on top. Do not place anything on top. Store the rest of
the attachments in a safe place where they will not be
damaged and won’t cause harm.
around the cord wrap on the back of the motor base.

upright

with the blade assembly

Wrap the power cord

RESETTING THE MOTOR THERMOSTAT

The Nutri Ninja | Ninja Blender System with Auto-iQ

Technology features a unique safety system which
prevents damage to the unit’s motor and drive system
should you inadvertently overload your appliance. If

the appliance is being overloaded, the motor
will stop. Allow the appliance to cool for
approximately 15 minutes. To reset the appliance,

follow the resetting procedure below:

1

Unplug the appliance from the electrical outlet.

2

Remove and empty the container and ensure that no

food is jamming the Blade Assembly or attachments.

3

Allow the appliance to cool for approximately 15

minutes.

4

Re-install the container onto the base and re-plug the

appliance into the electrical outlet.

5

Proceed to use the appliance as before making sure not
to exceed the recommended maximum capacities.

PROBLEMS POSSIBLE REASONS & SOLUTIONS

Motor Doesn’t Start or Blade
Assembly Doesn’t Rotate.

Food is Unevenly Chopped.

Food is Chopped Too Fine or is
Too Watery.

Food Collects On Lid or On the
Sides of the Container.

You Cannot Achieve Snow
From Solid Ice.

Motor Base Won’t Stick to
Counter or Table Top.

Make sure the container is securely locked on the motor base.

Make sure the lid is securely on the container in the correct position (align
arrows).

The appliance is turned “Off”. Press the power button ( ) to turn “On”.

Check that the plug is securely inserted into the electrical outlet.

Check the fuse or circuit breaker.

The unit has overloaded. The appliance will stop and the power light will
flash. Unplug and wait approximately 15 minutes before using again.

The unit has overheated. Unplug and wait approximately 15 minutes before
using again.

Check to make sure the unit is not overloaded.

Either you are chopping too much food at one time, or the pieces are not of
even size and processing smaller amounts per batch.

The food has been over processed. Use Auto-iQ™ Pulse button for
controlled processing.

The mixture is too thick. Add more liquid.

Do not use ice that has been sitting out or has started to melt. Use ice
straight from the freezer.

Start with a few pulses and then go to a continuous blending cycle.

Make sure surface and suction feet are wiped clean. Suction feet will only
stick to smooth surfaces. Suction feet WILL NOT stick on some surfaces
such as, wood, tile and non-polished finishes.

DO NOT attempt to use appliance when the motor base is stuck to a
surface that is not secure, (cutting board, platter, plates, etc.).

Your Ninja® is able to detect which jar is on the base. You may be trying

You get an “Err” Message

You have a blinking red light

to use a program that is not designed for the jar you have installed. The
programs will light up indicating which programs are available for each jar.

The unit is not installed properly. For your safety the unit will only be able to
be turned on when it is properly assembled. Please refer to the assembly
pages of this inspiration guide for assistance.

Replacement Parts

ORDERING REPLACEMENT PARTS

To order additional parts and attachments, please visit our website: www.ninjakitchen.com
or feel free to contact customer service: 1-877-646-5288.

15 16

www.ninjakitchen.com1-877-646-5288

Notes

ONE (1) YEAR LIMITED WARRANTY

SharkNinja Operating LLC warrants this product to be free from material defects and workmanship for a period of one (1)

year from the date of purchase when utilized for normal household use, subject to the following conditions, exclusions and
exceptions.

The liability of SharkNinja Operating LLC is limited solely to the cost of the repair or replacement of the unit at our option.
This Limited Warranty does not cover normal wear of parts and does not apply to any unit that has been tampered with or
used for commercial purposes. This Limited Warranty does not cover damage caused by misuse, abuse, negligent handling or
damage due to faulty packaging or mishandling in transit. This Limited Warranty does not cover damage or defects caused by
or resulting from damages from shipping or repairs, service or alteration to the product or any of its parts, which have been
performed by a repair person not authorized by SharkNinja Operating LLC.

If your appliance fails to operate properly while in use under normal household conditions within the Limited Warranty period,
you may return the complete appliance and accessories with proof of purchase and date, freight prepaid. For Customer Service
support, call 1-877-646-5288 or visit our website www.ninjakitchen.com.

If the appliance is found by SharkNinja Operating LLC to be defective, in SharkNinja Operating LLC’s sole discretion, we
will repair or replace it free of charge. Proof of purchase date and a check made payable to SharkNinja Operating LLC in the
amount of $19.95 to cover the cost of return shipping and handling must be included.*

This Limited Warranty is extended to the original purchaser of the unit and excludes all other legal, implied and/or conventional
warranties. The responsibility of SharkNinja Operating LLC if any, is limited to the specific obligations expressly assumed
by it under the terms of this Limited Warranty. In no event is SharkNinja Operating LLC liable for incidental or consequential
damages to anyone of any nature whatsoever. Some states do not permit the exclusion or limitation of incidental or
consequential damages, so the above may not apply to you.

This Limited Warranty gives you specific legal rights, and you may also have other rights which vary from state to state or from
province to province.

*IMPORTANT: Carefully pack item to avoid damage in shipping. Be sure to include proof of purchase date and

to attach tag to item before packing with your name, complete address and phone number with a note giving

purchase information, model number and what you believe is the problem with the item. We recommend you insure

the package (as damage in shipping is not covered by your Limited Warranty). Mark the outside of your package

“ATTENTION CUSTOMER SERVICE”.

PRODUCT REGISTRATION

Please visit www.ninjakitchen.com or call 1-877-646-5288 to register your new Ninja® product within ten (10) days of
purchase. You will be asked to provide the store name, date of purchase and model number along with your name and address.

The registration will enable us to contact you in the unlikely event of a product safety notification. By registering you
acknowledge to have read and understood the instructions for use, and warnings set forth in the accompanying instructions.

17 18

www.ninjakitchen.com1-877-646-5288

SharkNinja Operating LLC
US: Newton, MA 02459
CAN: Ville St-Laurent, QC H4S 1A7

1-877-646-5288
www.ninjakitchen.com

Ninja, Nutri Ninja, Pro Extractor Blades and Sip & Seal are registered trademarks

of SharkNinja Operating LLC.

Auto-iQ and Total Crushing are trademarks of SharkNinja Operating LLC.

Illustrations may differ from actual product. We are constantly striving to improve our
products, therefore the specifications contained herein are subject to change without notice.

For SharkNinja U.S. Patent information visit www.sharkninja.com/USPatents.

© 2016 SharkNinja Operating LLC
BL680A_30_E_160126_2
PRINTED IN CHINA