BL665Q series
®
OWNER’S GUIDE
ninjakitchen.com
1 877 646-5288
IMPORTANT SAFETY INSTRUCTIONS
For Household Use Only
WHEN USING ELECTRICAL APPLIANCES,
BASIC SAFETY PRECAUTIONS SHOULD
ALWAYS BE FOLLOWED, INCLUDING THE
FOLLOWING:
READ ALL INSTRUCTIONS BEFORE USING
YOUR NINJA® KITCHEN SYSTEM.
POLARIZED PLUG
3 WARNING: Stacked Blade Assembly
4 WARNING: Chopping Blade Assembly
WARNING: To reduce the risk of
electric shock, this appliance has a polarized plug
(one blade is wider than the other). This plug will
fit into a polarized outlet only one way. If the plug
does not fit fully into the outlet, reverse the plug.
If it still does not fit, contact a qualified electrician
to install the proper outlet. DO NOT modify the
plug in any way.
5 CAUTION: Do not blend hot liquids,
WARNING: Extension cords are
not recommended for use with this product.
6 CAUTION: We do not recommend
7 CAUTION: Remove the Nutri Ninja
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK OR INJURY:
1 WARNING: Remove utensils prior to
processing. Failure to remove may
cause the jar to be damaged or to
shatter which may cause personal
injury.
2 WARNING: Stacked Blade Assembly
is sharp, not locked in place and
removable, handle with care. When
handling the Stacked Blade Assembly
always hold by the shaft. Failure to do
so will result in a risk of laceration.
8 To protect against electrical shock, do not
9 DO NOT allow the appliance to be used by
is sharp and not locked in place. If
using the pour spout, ensure the lid is
fully locked onto the pitcher. If pouring
with the lid removed, carefully remove
the Stacked Blade Assembly first,
holding it by the shaft. Failure to do so
will result in a risk of laceration.
is sharp and not locked in place. Make
sure to carefully remove lid and
Chopping Blade Assembly, holding it by
the shaft, before emptying contents.
Failure to do so will result in a risk of
laceration.
doing so may cause excessive pressure
build-up, resulting in risk of the user
being burned.
grinding in any of our Nutri Ninja
Blades Assembly from the Nutri Ninja Cup
upon completion of blending. Do not store
ingredients before or after blending them
in the cup with the blade assembly
attached. Some foods may contain active
ingredients or release gases that will
expand if left in a sealed container,
resulting in excessive pressure buildup
that can pose a risk of injury.
submerge the appliance or allow the power
cord to come into contact with water or any
other liquid.
children. Close supervision is necessary
when used near children. This is not a toy.
®
cups.
1
1-877-646-5288
10 Never leave an appliance unattended when
inuse.
11 Appliance accessories are not intended to
be used in the microwave as it may result in
damage to the accessories.
12 Turn the appliance Off and remove the
power cord from the electrical outlet
when not in use, before assembling or
disassembling parts and before cleaning.
To unplug, grasp the plug and pull from the
electrical outlet. Never pull from the power
cord.
13 DO NOT abuse the power cord. Never carry
the appliance by the power cord or yank it
to disconnect from electrical outlet; instead
grasp the plug and pull to disconnect.
14 DO NOT operate any appliance with a
damaged cord or plug, or after the appliance
malfunctions, has been dropped or damaged
in any manner. This appliance has no
serviceable parts. Return the appliance to
SharkNinja Operating LLC for examination,
repair or adjustment.
15 DO NOT let the power cord hang over
the edge of table or counter or touch hot
surfaces such as the stove.
16 Always use appliance on a dry, level surface.
17 Keep hands, hair, clothing, as well as
utensils out of container while processing to
reduce the risk of severe injury to persons
or damage to the appliance. A scraper may
be used but only when the appliance is not
running.
18 Avoid contact with moving parts.
19 DO NOT attempt to sharpen blades.
20 DO NOT use the appliance if blade
assemblies are bent or damaged.
21 To reduce risk of injury, never place the
blade assemblies on the base without
the pitcher or Nutri Ninja® cup properly
attached.
22 DO NOT operate this appliance on or near
any hot surfaces (such as gas or electric
burner or in a heated oven).
23 The use of attachments or accessories
including canning jars, not recommended by
the manufacturer may result in fire, electric
shock or personal injury.
24 DO NOT remove the container from the
motor base while the appliance is in
operation.
25 To reduce the risk of injury, NEVER operate
the appliance without the lid in place; DO
NOT try to defeat the interlock mechanism;
make sure that the attachment is properly
installed before operating the appliance.
26 DO NOT expose containers to extreme
temperature changes.
27 DO NOT overfill.
28 DO NOT operate the appliance empty.
29 If the appliance overheats, a thermal switch
will become activated and shut off the motor.
To reset, unplug the appliance and let it cool
down for approximately 15 minutes before
using again.
30 THIS PRODUCT IS INTENDED FOR
HOUSEHOLD USE ONLY. Do not use
this appliance for anything other than its
intended use. Do not use outdoors.
31 The maximum rating is based on the
Stacked Blade Assembly (pitcher) that drives
the greatest power and other recommended
attachments may draw significantly less
power or current.
INSTRUCTIONS
SAVE THESE
ninjakitchen.com
2
THIS BOOK COVERS MODEL NUMBER:
BL665QBK
BL665QCN
BL665QWH
TECHNICAL SPECIFICATIONS
Voltage: 120V., 60Hz.
Power: 1200 Watts
Pitcher Capacity: 72 oz. (9 cups, 2.15 L)
MAX Liquid Capacity: 64 oz. (8 cups, 1.9 L)
Bowl Capacity: 64 oz. (8 cups, 1.9 L)
Nutri Ninja® Cup Capacity: 16 oz. (2 cups, 470 ml)
3
1-877-646-5288
Contents
Thank you for
purchasing the
Ninja® Kitchen
System.
Getting to Know Your Ninja Kitchen System ........................................................................... 5
Before First Use .................................................................................................................. 7
Assembly & Use of the Pitcher ............................................................................................. 8
Assembly & Use of the Nutri Ninja® Cup ............................................................................ 10
Assembly & Use of the Food Processor Bowl ...................................................................... 11
Using the Chopping Blade Assembly ................................................................................ 12
Using the Dough Blade Assembly .................................................................................... 12
Removing the Dough Station ........................................................................................... 12
Care & Maintenance ........................................................................................................ 13
Speed Chart .................................................................................................................... 14
Troubleshooting Guide ....................................................................................................... 15
Replacement Parts ............................................................................................................ 15
Warranty & Registration ..................................................................................................... 18
ninjakitchen.com
4
Getting To Know Your Ninja® Kitchen System
a
b
c
d
e
f
g
h
i
j
k
a To-Go Lid (x2)
b Chopping Blade Assembly
c Dough Blade Assembly
d Nutri Ninja® Cup
e Stacked Blade Assembly
f Pitcher Lid with Locking Handle
g Bowl Lid with Locking Handle
h 72 oz. Pitcher
NOTE: Attachments are not interchangeable.
5
1-877-646-5288
l
m
i 64 oz. Food Processor Bowl
j Gear Shaft
k Nutri Ninja Blade Assembly
l Motor Base
m Dough Station
n Power Cord (not shown)
o Cord Storage (in back) (not shown)
The Ninja® Kitchen System is a professional, high powered innovative tool with a sleek design and outstanding
performance, a true asset to any kitchen. It is perfect for ice crushing, blending, pureeing, and controlled processing.
The Ninja Kitchen System also features a unique capability to knead dough for pizzas, breads, pretzels and cookies!
Create all of your favorite recipes fast and easy with just one touch of a button. For best results, be sure to carefully read
all the instructions contained in the manual before using this appliance.
FEATURES:
• Patented Ninja Technology
• Extra Large, 72 oz. Pitcher (MAX liquid Capacity: 64 oz.) - BPA Free
• 64 oz. Food Processor Bowl - BPA Free
• Nutri Ninja® Cup - BPA Free
• Lock–In Lid, Featuring Pour Spout
• Easy to Clean Electronic Control Panel
• Sturdy, Non-Slip Base
• Cord Storage
ninjakitchen.com
6
Before First Use
PLEASE KEEP THESE IMPORTANT
SAFEGUARDS IN MIND WHEN USING THE
APPLIANCE:
IMPORTANT: Make sure that the motor base
is plugged in for use.
IMPORTANT: Never add ingredients into the
container before placing the attachment in
first.
IMPORTANT: Attachments are not
interchangeable.
IMPORTANT: DO NOT attempt to operate the
appliance without the lid on.
IMPORTANT: Never run the appliance empt y.
IMPORTANT: Appliance accessories are not
intended to be used in the microwave as it
may result in damage to the accessories.
7
1-877-646-5288
WARNING: Stacked Blade
Assembly is sharp and not
locked in place. If using
the pour spout, ensure the
lid is fully locked onto the
blender pitcher. Failure to
do so will result in a risk of
laceration.
WARNING: Stacked
Blade Assembly and
Chopping Blade Assembly
are sharp and not locked
in place. If pouring with
the lid removed from
the container, carefully
remove the Blade
Assembly first, holding it by the shaft. Failure to
do so will result in a risk of laceration.
WARNING: Chopping
Blade Assembly is sharp and
not locked in place. Before
emptying contents carefully
remove lid and Chopping
Blade Assembly, holding it by
the shaft. Failure to do so will result in a risk
of laceration.
CAUTION: Do not immerse the motor base
into water or any other liquid.
1 Remove all packaging material and labels from the appliance.
Separate/remove all parts from each other.
2 Wash the lids, pitcher, bowl, Nutri Ninja Cups and blade
assemblies in warm, soapy water. When washing the
blade assemblies, use a dish-washing utensil with a
handle to avoid direct hand contact with blades.
WARNING: Handle the Stacked Blade Assembly,
Chopping Blade Assembly and Nutri Ninja Blade
Assembly with care when washing, as the blades
are sharp.
3 Handle blade assemblies with care to avoid contact
with sharp edges. Rinse and air dry thoroughly.
4 The pitcher, bowl, Nutri Ninja Cup, lids, Stacked Blade
Assembly, Chopping Blade Assembly and Nutri
Ninja Blade Assembly are all dishwasher safe. It is
recommended that the lids and blade assemblies be
placed on the top rack. Ensure the blade assembly is
removed from the cup, processor bowl or pitcher before
placing in the dishwasher.
5 Wipe the motor base clean with a damp cloth.
Assembly & Use of the Pitcher
WARNING: Handle the Stacked Blade Assembly with care, as the blades are sharp.
WARNING: Remove utensils prior to processing. Failure to remove may cause the pitcher to be damaged or
to shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the
user being burned.
IMPORTANT: Make sure that the motor base is plugged in for use.
ASSEMBLY
Fig. 3a
OR
Fig. 2Fig. 1
It’s best to add the liquid ingredients first and then the dry ingredients.
1 Review warning and caution statements above before
proceeding to number 2.
2 Place the motor base on a clean, dry, level surface such
as a counter or table top.
3 Align and lower the pitcher onto the motor
base. (Fig. 1) Handle should be aligned slightly to the
right of the “LOCK” symbol on the motor base.
4 Rotate the blender pitcher clockwise until it clicks in
place. As the pitcher rotates, it will lower and the safety
tabs on the bottom of the pitcher will slide under the
safety tabs on the top of the motor base. (Fig. 2)
5 The pitcher can be placed on the motor base two ways;
the handle can be on the front right corner or the front
left corner. (Fig. 3a, Fig. 3b)
6 Holding the Stacked Blade Assembly by the top of the
shaft, place it onto the drive gear inside the pitcher.
Ensure that the Stacked Blade Assembly is seated
properly and is standing upright. (Fig. 4)
NOTE: The Stacked Blade Assembly will fit loosely on
the drive gear.
Fig. 4
7 Add the ingredients to the pitcher, making sure that
they do not exceed the highest measured marking line
on the side of the pitcher.
NOTE: If you need to add additional ingredients while
the appliance is processing, open the pour spout cap
and pour the ingredients in through the opening.
NOTE: When blending any kind of liquids, such as
mixtures of any drinks or smoothies, do not exceed the
“Max liquid” mark (64 oz.) on the pitcher.
8 Plug the power cord into the electrical outlet and press
the power button ( ).
IMPORTANT: As a safety feature, the power
button ( ) will flash and the motor will not work
if the pitcher and lid are not installed correctly.
When the pitcher and lid are installed properly,
the power button ( ) will be solid, indicating that
the appliance is ready for use.
9 Holding the lid by the handle in the upright
position, place it on top of the pitcher aligning the
arrow ( ) located on the lid with the arrow ( ) located
on the pitcher’s handle. (Fig. 5)
Fig. 5Fig. 3b
ninjakitchen.com
8
Assembly & Use of the Pitcher - cont.
USE REMOVAL
Fig. 6 Fig. 7 Fig. 8
10 Review warning and caution statements on page 8
before proceeding.
11 Select the speed that best suits your needs. (Fig. 6)
NOTE: Pulse ingredients for even chopping by pressing
down in short intervals.
12 When you have reached your desired consistency, stop
the appliance by pressing the power button ( ) and
wait for the Stacked Blade Assembly to stop turning.
(Fig. 7)
13 To remove the lid, pull the lid handle up to a 90° angle.
Turn the blender pitcher counter-clockwise to lift off the
base. (Fig. 7, Fig. 8)
CAUTION: Never insert your hands in the pitcher
as the Stacked Blade Assembly is sharp. Always
use a spatula to dislodge food that has stuck to
the sides of the pitcher.
9
1-877-646-5288
14 Open the pour spout cap and use the spout to empty
liquid contents.
15 For thicker consistencies, first remove the lid by
pressing the release button and pulling the lid handle
up to a 90 degree angle to lift lid off the pitcher. Then,
carefully remove the Stacked Blade Assembly by the
top of the shaft. Place Stacked Blade Assembly away
from the work area to avoid accidental contact. Finally,
empty contents from the pitcher.
16 Make sure that the unit is unplugged when not in use.
Assembly & Use of the Nutri Ninja® Cup
WARNING: Handle the Nutri Ninja Blade Assembly with care, as the blades are sharp.
WARNING: Remove utensils prior to processing. Failure to remove may cause the Nutri Ninja Cup to be
damaged or to shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the
user being burned.
CAUTION: Remove the Nutri Ninja Blade Assembly from the Nutri Ninja Cup upon completion of blending. Do
not store ingredients before or after blending them in the cup with the blade assembly attached. Some foods
may contain active ingredients or release gases that will expand if left in a sealed container, resulting in
excessive pressure buildup that can pose a risk of injury.
IMPORTANT: Make sure that the motor base is plugged in for use.
ASSEMBLY USE REMOVAL
Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6
For best results, use short “PULSES”... Practice makes perfect!!
1 Review warning and caution statements above before
proceeding to number 2.
2 Place the motor base on a clean, dry, level surface such
as a counter or table top.
3 Add ingredients to the Nutri Ninja Cup.
4 Place the Nutri Ninja Blade Assembly onto the cup and
screw it tightly until you have a good seal. (Fig. 1)
5 Turn the Nutri Ninja Cup upside down and place it
onto the motor base, aligning the tabs on the cup with
the motor base. Turn the Nutri Ninja Cup clockwise to
lock into place. You will hear a click when the lock is
engaged. (Fig. 2)
6 Press down on the Single Serve button in short
intervals to activate. (Fig. 3)
7 When you have reached your desired consistency, stop
the appliance by removing your hand from the Single
Serve button. To remove the Nutri Ninja Cup turn it
counter-clockwise (Fig. 4) and pull straight up to
remove. (Fig. 5)
NOTE: Do not overfill! To avoid spilling, do not add
ingredients past the “Max” fill line.
8 Turn the cup upright and remove the Nutri Ninja Blade
Assembly by twisting the blade assembly to the left.
(Fig. 6)
9 Do not store blended contents with the Nutri Ninja
Blade Assembly attached.
10 Place the To-Go lid onto the Nutri Ninja Cup, twist to
seal and enjoy!
11 Be sure to store the Nutri Ninja Blades Assembly
attached to an empty cup when not in use.
12 Make sure that the motor base is unplugged when not
in use.
ninjakitchen.com
10
Assembly and Use of the Food Processor Bowl
WARNING: Chopping Blade Assembly is sharp and not locked in place. Make sure to carefully remove lid and
Chopping Blade Assembly, holding it by the shaft, before emptying contents. Failure to do so will result in a
risk of laceration.
WARNING: Remove utensils prior to processing. Failure to remove may cause the bowl to be damaged or to
shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the
user being burned.
IMPORTANT: Make sure that the motor base is plugged in for use.
ASSEMBLY
Fig. 1 Fig. 2 Fig. 3
1 Review warning and caution statements above before
proceeding to number 2.
2 Place the motor base on a clean, dry, level surface such
as a counter or table top.
3 Align and lower the bowl onto the motor base. (Fig. 1)
Handle should be aligned slightly to the right of the
“LOCK” symbol on the motor base.
4 Rotate the bowl clockwise until it clicks in place. As the
bowl rotates, it will lower and the safety tabs on the
bottom of the bowl will slide under the safety tabs on
the top of the motor base. (Fig. 2)
5 The bowl can be placed on the motor base two ways;
the handle can be on the front right corner or the front
left corner.
6 Holding the Chopping Blade Assembly or the Dough
Blade Assembly by the top of the shaft, place it onto the
drive gear inside the bowl. Ensure that the Chopping
Blade Assembly or the Dough Blade Assembly is seated
properly and is standing upright.
NOTE: The Chopping Blade Assembly and Dough Blade
Assembly will fit loosely on the drive gear.
11
1-877-646-5288
7 Add the ingredients to the processor bowl, making sure
that they do not exceed the highest measured marking
line on the side of the bowl.
8 Plug the power cord into the electrical outlet and press
the power button ( ).
IMPORTANT: As a safety feature, the power
button ( ) will flash and the motor will not work
if the pitcher and lid are not installed correctly.
When the bowl and lid are installed properly, the
power but ton ( ) will be solid, indicating that the
appliance is ready for use.
9 Holding the lid by the handle in the upright
position, place it on top of the bowl aligning the
arrow ( ) located on the lid with the arrow ( ) located
on the bowl’s handle. (Fig. 3)
CHOPPING BLADE
ASSEMBLY
Fig. 1 Fig. 3Fig. 2 Fig. 4
Locking
Tab
DOUGH BLADE
ASSEMBLY
REMOVAL of
DOUGH STATION
USING THE CHOPPING BLADE ASSEMBLY
1 Review warning and caution statements on page 11
before proceeding to number 2.
2 Place the motor base on a clean, dry, level surface such
as a counter or table top.
3 Align and lower the bowl onto the motor base. Handle
should be aligned slightly to the right of the “LOCK”
symbol on the motor base.
4 Holding the Chopping Blade Assembly by the top of
the shaft, place it onto the drive gear inside the bowl.
Ensure that the attachment is seated properly and that
it is standing straight.
NOTE: The blade will fit loosely on the drive gear.
5 Add the ingredients and secure the bowl lid onto the
bowl. (Fig. 1)
6 Plug the power cord into the electrical outlet and press
on the power button ( ).
NOTE: Please refer to “Speed Settings & Uses” chart
for suggested uses and speeds.
USING THE DOUGH BLADE ASSEMBLY
IM PO RTAN T: Use only the “DOUGH” button when
using this attachment.
IM PO RTAN T: Use the dough station when using the
dough blade on SPEED 1/DOUGH.
1 Place the dough station on a clean, dry, level surface
such as a counter or table top with the locking tab in
the back. (Fig. 2) Press down to secure the suction feet
to the surface.
2 Place the motor base inside the dough station and push
down until you hear it click into place. (Fig. 2)
3 Secure the bowl onto the motor base.
4 Holding the Dough Blade Assembly by the shaft, place
it onto the drive gear inside the bowl. Ensure that the
Dough Blade Assembly is seated properly and that it is
standing straight.
5 Add the ingredients and secure the bowl lid onto the
bowl. (Fig. 3)
NOTE: For best results add wet ingredients first and
then add dry ingredients.
6 Plug the power cord into the electrical outlet and press
on the power button ( ).
NOTE: Please refer to “Speed Settings & Uses” chart
for suggested uses.
REMOVING THE DOUGH STATION
1 Once finished using the dough blade remove the bowl
from the motor base.
2 To remove the motor base from inside the dough
station, pull the locking tab away from the back of the
motor base while you lift the motor base out of the
dough station. (Fig. 4)
3 To release the dough station from the counter or
tabletop, lift the tabs located on suction feet of the
dough station.
ninjakitchen.com
12
Care & Maintenance
HOW TO CLEAN
CAUTION: Make sure that the motor base is
unplugged from the power source before inserting
or removing any attachment and before cleaning.
CAUTION: DO NOT immerse the motor base into
water or any other liquid.
1 Separate/remove all parts from each other.
2 Hand Washing: Wash the containers, lids, blade
assemblies and attachments in warm, soapy water. When
washing the blade assemblies, use a dish-washing utensil
with a handle to avoid direct hand contact with blades.
Handle blade assemblies with care to avoid contact with
sharp edges. Rinse and air dry thoroughly.
Dishwasher: The containers, lids, blade assemblies and
attachments are all dishwasher safe. The lids and blade
assemblies are top rack dishwasher safe. Ensure that the
blade assemblies are removed from the containers before
placing in the dishwasher.
WARNING: Handle the Stacked Blade Assembly,
Chopping Blade Assembly and Nutri Ninja Blade
Assembly with care when washing, as the blades
are sharp. Contact with the blades’ edges can
result in laceration.
3 Wipe the motor base clean with a damp cloth
Please call customer service if any servicing needs to
be performed on the appliance at 1-877-646-5288.
.
HOW TO STORE
1 Store the Ninja® Kitchen System
assembly inside the corresponding container with the lid
secured on top. Do not place anything on top. Store the
rest of the attachments in a safe place where they will
not be damaged and won’t cause harm.
cord into the cord storage area located in the back of
the motor base.
Cord Storage
NOTE: Do not store blended or unblended
ingredients in the Nutri Ninja Cup with the blade
assembly attached.
upright with the blade
Insert the power
RESETTING THE MOTOR THERMOSTAT
The Ninja Professional Blender features a unique safety
system which prevents damage to the unit’s motor and drive
system should you inadvertently overload your appliance.
If the appliance is being overloaded, the motor will
stop. Allow the appliance to cool for approximately
15 minut es. To reset the appliance, follow the resetting
procedure below:
1 Unplug the appliance from the electrical outlet.
2 Remove and empty the container and ensure that no
food is jamming the blade assemblies.
3 Allow the appliance to cool for approximately 15
minutes.
4 Re-install the container onto the base and re-plug the
appliance into the electrical outlet.
5 Proceed to use the appliance as before making sure not
to exceed the recommended maximum capacities.
13
1-877-646-5288
Speed Chart
FUNCTION CONTAINER ATTACHMENT
Single Serve
Blending
Mincing Bowl
Kneading Bowl Dough Blade Assembly 1
Dough Mixing Bowl Dough Blade Assembly 1 Cookie dough
Blending
Grinding
Grating
Chopping
Mixing Pitcher or Bowl Stacked Blade Assembly 2
Ice Crushing
Pureeing
Nutri Ninja® Cup
Pitcher
Nutri Ninja Cup
Bowl
Nutri Ninja Cup
Bowl
Nutri Ninja Cup
Bowl
Nutri Ninja Cup
Pitcher or Bowl
Nutri Ninja Cup
Pitcher
Nutri Ninja Cup
Nutri Ninja Blade
Assembly
Chopping Blade
Assembly
Stacked Blade Assembly
Nutri Ninja Blade
Assembly
Chopping Blade
Assembly
Nutri Ninja Blade
Assembly
Chopping Blade
Assembly
Nutri Ninja Blade
Assembly
Chopping Blade
Assembly
Nutri Ninja Blade
Assembly
Stacked Blade Assembly
Nutri Ninja Blade
Assembly
Stacked Blade Assembly
Nutri Ninja Blade
Assembly
SPEED
BUTTON
Single Serve
Pulse
2
Single Serve
2
Single Serve
3 or Pulse
Single Serve
Pulse
Single Serve
3
Single Serve
3
Single Serve
TYPE OF FOOD
Smoothies
Frappes
Milk Shakes
Onion
Garlic
Herbs
Bread dough
Pie dough
Pizza dough
Pretzel dough
Pâtés
Stewed fruits
Dips
Apple sauce
Spreads
Soups*
Baby food
Meat
Grated cheese
Bread crumbs
Salsa
Vegetables
Nuts
Light cake mixes
Batters
Ice
Smoothies
Smooth soups*
Milkshakes
IM PO RTAN T: Do not run the appliance over 4 minutes at a time to prevent overheating of the appliance.
IM PO RTAN T: Use the dough station when using the Dough Blade Assembly on SPEED 1/DOUGH.
* When blending sauces and soups, make sure they’re cooled to room temperature first - Ninja® containers are not intended
for hot blending.
ninjakitchen.com
14
Troubleshooting Guide
PROBLEMS POSSIBLE REASONS & SOLUTIONS
Motor Doesn’t Start or Blade
Assembly Doesn’t Rotate.
Food is Unevenly Chopped.
Make sure the container is securely placed on motor base.
Make sure the lid is securely on container in the correct position (align arrows).
The appliance is turned “Off”. Press the power button ( ) to turn “On”.
Check that the plug is securely inserted into the electrical outlet.
Check the fuse or circuit breaker.
The unit has overloaded. The appliance will stop and the power light will remain
on while speeds 1, 2 and 3 will flash. Unplug and wait approximately 15 minutes
before using again.
The unit has overheated. Unplug and wait approximately 15 minutes before
using again.
Check to make sure the unit is not overloaded.
Either you are chopping too much food at one time, you are chopping food with
different textures or the pieces are not of even size. Process smaller amounts per
batch.
Food is Chopped Too Fine or is
Too Watery.
Food Collects On
Lid or On the Sides of the
Container.
You Cannot Achieve Snow
From Solid Ice.
Dough Station Won’t Stick to
Counter or Table Top.
Motor Base Won’t Fit in
Dough Station.
Replacement Parts
The food has been over processed. Use pulse button for controlled processing.
The mixture is to thick. Add more liquid.
Do not use ice that has been sitting out or has started to melt. Use ice straight
from the freezer.
Make sure surface and suction feet are wiped clean. Suction feet will only stick
to smooth sur faces. Suction feet WILL NOT stick on some surfaces such as,
wood, tile and non-polished finishes.
DO NOT attempt to use appliance when the dough station is stuck to a
surface that is not secure, (cutting board, platter, plates, etc.).
Ensure that the cord is not in the way and there are no foreign objects, materials
or food inside the dough station.
To order additional parts and accessories, please visit our website: ninjakitchen.com or feel
free to contact customer service: 1-877-646-5288.
15
1-877-646-5288
Notes
ninjakitchen.com
16
Notes
17
1-877-646-5288
ONE (1) YEAR LIMITED WARRANTY
SharkNinja Operating LLC warrants this product to be free from material defects and workmanship for a period of one (1)
year from the date of purchase when utilized for normal household use, subject to the following conditions, exclusions and
exceptions.
The liability of SharkNinja Operating LLC is limited solely to the cost of the repair or replacement of the unit at our option.
This Limited Warranty does not cover normal wear of parts and does not apply to any unit that has been tampered with or
used for commercial purposes. This Limited Warranty does not cover damage caused by misuse, abuse, negligent handling or
damage due to faulty packaging or mishandling in transit. This Limited Warranty does not cover damage or defects caused by
or resulting from damages from shipping or repairs, service or alteration to the product or any of its parts, which have been
performed by a repair person not authorized by SharkNinja Operating LLC.
If your appliance fails to operate properly while in use under normal household conditions within the Limited Warranty period,
you may return the complete appliance and accessories with proof of purchase and date, freight prepaid. For Customer Service
support, call 1-877-646-5288 or visit our website ninjakitchen.com.
If the appliance is found by SharkNinja Operating LLC to be defective, in SharkNinja Operating LLC’s sole discretion, we
will repair or replace it free of charge. Proof of purchase date and a check made payable to SharkNinja Operating LLC in the
amount of $19.95 to cover the cost of return shipping and handling must be included.*
This Limited Warranty is extended to the original purchaser of the unit and excludes all other legal, implied and/or conventional
warranties. The responsibility of SharkNinja Operating LLC if any, is limited to the specific obligations expressly assumed
by it under the terms of this Limited Warranty. In no event is SharkNinja Operating LLC liable for incidental or consequential
damages to anyone of any nature whatsoever. Some states do not permit the exclusion or limitation of incidental or
consequential damages, so the above may not apply to you.
This Limited Warranty gives you specific legal rights, and you may also have other rights which vary from state to state or from
province to province.
*IMPORTANT: Carefully pack item to avoid damage in shipping. Be sure to include proof of purchase date and
to attach tag to item before packing with your name, complete address and phone number with a note giving
purchase information, model number and what you believe is the problem with the item. We recommend you insure
the package (as damage in shipping is not covered by your Limited Warranty). Mark the outside of your package
“ATTENTION CUSTOMER SERVICE”.
PRODUCT REGISTRATION
Please visit ninjakitchen.com or call 1-877-646-5288 to register your new Ninja® product within ten (10) days of purchase.
You will be asked to provide the store name, date of purchase and model number along with your name and address.
The registration will enable us to contact you in the unlikely event of a product safety notification. By registering you
acknowledge to have read and understood the instructions for use, and warnings set forth in the accompanying instructions.
ninjakitchen.com
18
SharkNinja Operating LLC
US: Newton, MA 02459
CAN: Ville St-Laurent, QC H4S 1A7
1-877-646-5288
ninjakitchen.com
Ninja and Nutri Ninja are registered trademarks of SharkNinja Operating LLC.
Illustrations may differ from actual product. We are constantly striving to improve our
products, therefore the specifications contained herein are subject to change without notice.
For SharkNinja U.S. Patent information visit sharkninja.com/USPatents.
© 2016 SharkNinja Operating LLC
BL665Q_SERIES_30_IB_E_160719_5
PRINTED IN CHINA
Loading...