Ninja BL663CO User Manual

®
Professional Blender
BL663
OWNER’S GUIDE
®
HELP
LINE
www.ninjakitchen.com
BL663_30_IB_ENG_120626_1.indd 1 12-06-26 9:23 AM
IMPORTANT SAFETY INSTRUCTIONS
For Household Use Only
WHEN USING ELECTRICAL APPLIANCES, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED, INCLUDING THE FOLLOWING:
READ ALL INSTRUCTIONS BEFORE USING YOUR NINJA® PROFESSIONAL BLENDER.
POLARIZED PLUG WARNING: To reduce the risk of electric
shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet.
DO NOT modify the plug in any way.
WARNING:
TO REDUCE THE RISK OF FIRE, ELEC TRIC SHOCK OR INJURY:
1. To protect against electrical shock, do not submerge the appliance or allow the power cord to come into contact with water or any other liquid.
2. DO NOT allow young children to operate the appliance or use as a toy. Close supervision is necessary when any appliance is used by or near children.
3. Never leave an appliance unattended when in use.
4. Turn the appliance Off and remove the power cord from the electrical outlet when not in use, before assembling or disassembling parts and before cleaning. To unplug, grasp the plug and pull from the electrical outlet. Never pull from the power cord.
5. DO NOT abuse the power cord. Never carry the appliance by the power cord or yank it to disconnect from electrical outlet; instead grasp the plug and pull to disconnect.
6. DO NOT operate any appliance with a damaged cord or plug, or after the appliance malfunctions, has been dropped or damaged in any manner. This appliance has no serviceable parts. Return the appliance to EURO-PRO Operating LLC for examination, repair or adjustment.
7. DO NOT let the power cord hang over the edge of table or counter or touch hot surfaces such as the stove.
8. Always use appliance on a dry, level surface.
1
BL663_30_IB_ENG_120626_1.indd 1 12-06-26 9:23 AM
TOLL FREE: 1-877-646-5288
9. Keep hands, hair, clothing, as well as utensils out of container while processing to reduce the risk of severe injury to persons or damage to the appliance. A scraper may be used but only when the appliance is not running.
10. CAUTION: Blade assembly is sharp, handle with care. When handling the blade assembly, always hold by the shaft.
11. Avoid contact with moving parts.
12. DO NOT attempt to sharpen blades.
13. DO NOT use the appliance if blade assembly is bent or damaged.
14. To reduce risk of injury, never place the blade assembly on base without pitcher or bowl properly attached.
15. DO NOT operate this appliance on or near any hot surfaces (such as gas or electric burner or in a heated oven).
16. The use of attachments or accessories including canning jars, not recommended by the manufacturer may result in fire, electric shock or personal injury.
17. DO NOT remove the container from the motor base while the appliance is in operation.
18. To reduce the risk of injury, NEVER operate the appliance without the lid in place; DO NOT try to defeat the interlock mechanism; make sure that the attachment is properly installed before operating the appliance.
19. DO NOT expose containers to extreme temperature changes.
20. Exercise extreme caution when blending hot liquids.
21. CAUTION: Do not process food or liquid that is hotter than 180°F/82°C. Allow very hot ingredients to cool before processing.
22. DO NOT overfill.
23. Extreme caution must be used when moving an appliance containing hot food, water or other liquids.
24. When processing hot foods or liquids, always open the pouring spout cap to vent the steam. Keep hands and other exposed skin away from the opening to prevent possible burns or scalding.
25. DO NOT operate the appliance empt y.
26. To reduce the risk of burns, always allow the appliance to cool after blending hot liquids before taking off parts and before cleaning.
27. If the appliance overheats, a thermal switch will become activated and shut off the motor. To reset, unplug the appliance and let it cool down for approximately 15 minutes before using again.
28. In the event that the unit overloads, the control panel lights will flash and the unit will shut down. Unplug the unit and wait 15 minutes to reset.
29. THIS PRODUCT IS INTENDED FOR HOUSEHOLD USE ONLY. Do not use this appliance for anything other than its intended use. Do not use outdoors.
30. The maximum rating is based on the 6-Blade Assembly (pitcher) that drives the greatest power and other recommended attachments may draw significantly less power or current.
WARNING: Extension cords
are not recommended for use with this product.
SAVE THESE INSTRUCTIONS
www.ninjakitchen.com
BL663_30_IB_ENG_120626_1.indd 2 12-06-26 9:23 AM
2
THIS BOOK COVERS MODEL NUMBERS:
BL663 30
TECHNICAL SPECIFICATIONS
Voltage: 120V., 60Hz.
Power: 1100 Watts
3
BL663_30_IB_ENG_120626_1.indd 3 12-06-26 9:23 AM
TOLL FREE: 1-877-646-5288
Contents
Thank you for purchasing the Ninja®
Professional Blender.
Getting to Know Your Ninja® Professional Blender .............................5
Assembling the Ninja® Professional Blender ........................................7
Assembly and Use of the Single Serve Cup ..................................................8
Assembly and Use of the 72-oz. Pitcher .........................................................9
Care & Maintenance .....................................................................................11
Speed Chart ..................................................................................................12
Troubleshooting Guide ...................................................................................12
Replacement Parts .........................................................................................12
Warranty & Registration.................................................................................14
www.ninjakitchen.com
BL663_30_IB_ENG_120626_1.indd 4 12-06-26 9:23 AM
4
Loading...
+ 11 hidden pages