®
Professional Blender
BL660
OWNER’S GUIDE
®
HELP
LINE
1 877 646-5288
www.ninjakitchen.com
BL660_30_IB_ENG_120316_2.indd 1 12-03-16 3:22 PM
IMPORTANT SAFETY INSTRUCTIONS
For Household Use Only
WHEN USING ELECTRICAL
APPLIANCES, BASIC SAFETY
PRECAUTIONS SHOULD ALWAYS
BE FOLLOWED, INCLUDING THE
FOLLOWING:
READ ALL INSTRUCTIONS BEFORE
USING YOUR NINJA® PROFESSIONAL
BLENDER.
POLARIZED PLUG
WARNING: To reduce the risk of electric
shock, this appliance has a polarized
plug (one blade is wider than the other).
This plug will fit into a polarized outlet
only one way. If the plug does not fit
fully into the outlet, reverse the plug. If
it still does not fit, contact a qualified
electrician to install the proper outlet.
DO NOT modify the plug in any way.
WARNING:
TO REDUCE THE RISK OF FIRE, ELEC TRIC
SHOCK OR INJURY:
1. To protect against electrical shock, do
not submerge the appliance or allow the
power cord to come into contact with
water or any other liquid.
2. DO NOT allow young children to
operate the appliance or use as a toy.
Close supervision is necessary when any
appliance is used by or near children.
3. Never leave an appliance unattended
when in use.
4. Turn the appliance Off and remove the
power cord from the electrical outlet
when not in use, before assembling or
disassembling parts and before cleaning.
To unplug, grasp the plug and pull from
the electrical outlet. Never pull from the
power cord.
5. DO NOT abuse the power cord. Never
carry the appliance by the power cord
or yank it to disconnect from electrical
outlet; instead grasp the plug and pull to
disconnect.
6. DO NOT operate any appliance with
a damaged cord or plug, or after the
appliance malfunctions, has been
dropped or damaged in any manner.
This appliance has no serviceable parts.
Return the appliance to EURO-PRO
Operating LLC for examination, repair or
adjustment.
7. DO NOT let the power cord hang over
the edge of table or counter or touch
hot surfaces such as the stove.
8. Always use appliance on a dry, level
surface.
1
BL660_30_IB_ENG_120316_2.indd 1 12-03-16 3:22 PM
TOLL FREE: 1-877-646-5288
9. Keep hands, hair, clothing, as well as
utensils out of container while processing
to reduce the risk of severe injury to
persons or damage to the appliance. A
scraper may be used but only when the
appliance is not running.
10. CAUTION: Blade assembly is sharp,
handle with care. When handling the
blade assembly, always hold by the shaft.
11. Avoid contact with moving parts.
12. DO NOT attempt to sharpen blades.
13. DO NOT use the appliance if blade
assembly is bent or damaged.
14. To reduce risk of injury, never place the
blade assembly on base without pitcher
or bowl properly attached.
15. DO NOT operate this appliance on or
near any hot surfaces (such as gas or
electric burner or in a heated oven).
16. The use of attachments or accessories
including canning jars, not
recommended by the manufacturer may
result in fire, electric shock or personal
injury.
17. DO NOT remove the container from
the motor base while the appliance is in
operation.
18. To reduce the risk of injury, NEVER
operate the appliance without the lid
in place; DO NOT try to defeat the
interlock mechanism; make sure that the
attachment is properly installed before
operating the appliance.
19. DO NOT expose containers to extreme
temperature changes.
20. Exercise extreme caution when blending
hot liquids.
21. CAUTION: Do not process food or
liquid that is hotter than 180°F/82°C.
Allow very hot ingredients to cool before
processing.
22. DO NOT overfill.
23. Extreme caution must be used when
moving an appliance containing hot
food, water or other liquids.
24. When processing hot foods or liquids,
always open the pouring spout cap to
vent the steam. Keep hands and other
exposed skin away from the opening
to prevent possible burns or scalding.
25. DO NOT operate the appliance
empt y.
26. To reduce the risk of burns, always
allow the appliance to cool after
blending hot liquids before taking off
parts and before cleaning.
27. If the appliance overheats, a thermal
switch will become activated and
shut off the motor. To reset, unplug
the appliance and let it cool down
for approximately 15 minutes before
using again.
28. In the event that the unit overloads,
the control panel lights will flash and
the unit will shut down. Unplug the
unit and wait 15 minutes to reset.
29. THIS PRODUCT IS INTENDED FOR
HOUSEHOLD USE ONLY. Do not use
this appliance for anything other than
its intended use. Do not use outdoors.
30. The maximum rating is based on
the 6-Blade Assembly (pitcher) that
drives the greatest power and other
recommended attachments may draw
significantly less power or current.
WARNING: Extension cords
are not recommended for use with this
product.
SAVE THESE
INSTRUCTIONS
www.ninjakitchen.com
BL660_30_IB_ENG_120316_2.indd 2 12-03-16 3:22 PM
2
THIS BOOK COVERS MODEL NUMBERS:
BL660 30
TECHNICAL SPECIFICATIONS
Voltage: 120V., 60Hz.
Power: 1100 Watts
3
BL660_30_IB_ENG_120316_2.indd 3 12-03-16 3:22 PM
TOLL FREE: 1-877-646-5288
Contents
Thank you for
purchasing
the Ninja®
Professional
Blender.
Getting to Know Your Ninja® Professional Blender .............................5
Assembling the Ninja® Professional Blender ........................................7
Assembly and Use of the Single Serve Cup ..................................................8
Assembly and Use of the 72-oz. Pitcher .........................................................9
Care & Maintenance .....................................................................................11
Speed Chart ..................................................................................................12
Troubleshooting Guide ...................................................................................12
Replacement Parts .........................................................................................12
Warranty & Registration.................................................................................14
www.ninjakitchen.com
BL660_30_IB_ENG_120316_2.indd 4 12-03-16 3:22 PM
4