Ninja BL642W Owner's Manual

BL642W

®

OWNER’S GUIDE

ninjakitchen.com

1 877 646-5288

IMPORTANT SAFETY INSTRUCTIONS

For Household Use Only

WHEN USING ELECTRICAL APPLIANCES,
BASIC SAFETY PRECAUTIONS SHOULD
ALWAYS BE FOLLOWED, INCLUDING THE
FOLLOWING:

READ ALL INSTRUCTIONS BEFORE
USING YOUR NUTRI NINJA® | NINJA®
BLENDER WITH AUTO-iQ™ TECHNOLOGY.

POLARIZED PLUG

WARNING: To reduce the risk

of electric shock, this appliance has a
polarized plug (one blade is wider than
the other). This plug will fit into a
polarized outlet only one way. If the
plug does not fit fully into the outlet,
reverse the plug. If it still does not fit,
contact a qualified electrician to install
the proper outlet. DO NOT modify the
plug in any way.

WARNING: Extension cords are not

recommended for use with this product.

WARNING:

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK
OR INJURY:

1 WARNING: Remove utensils prior to

processing. Failure to remove may
cause the jar to be damaged or to
shatter which may cause personal
injury.

2 WARNING: Stacked Blade Assembly

is sharp, not locked in place and
removable, handle with care. When
handling the Stacked Blade Assembly,
always hold it by the shaft. Failure to do
so will result in a risk of laceration.

3 WARNING: Stacked Blade Assembly

is sharp and not locked in place. If
using the pour spout, ensure the lid is
fully locked onto the pitcher. If pouring
with the lid removed, carefully remove
the Stacked Blade Assembly first,
holding it by the shaft. Failure to do so
will result in a risk of laceration.

4 CAUTION: Do not blend hot liquids,

doing so may cause excessive pressure
build-up, resulting in risk of the user
being burned.

5 CAUTION: We do not recommend

grinding in any of our Nutri Ninja® Cups.

6 CAUTION: Remove the Pro Extractor

Blades® Assembly from the Nutri Ninja
cup upon completion of blending. Some
ingredients have the potential to
expand after blending resulting in
excessive pressure buildup that can
pose a risk of injury.

7 To protect against electrical shock, do not

submerge the appliance or allow the power
cord to come into contact with water or any
other liquid.

8 DO NOT allow the appliance to be used by

children. Close attention is necessary when
used near children. This is not a toy.

9 Never leave an appliance unattended when in

use.

10 Appliance accessories are not intended to

be used in the microwave as it may result in
damage to the accessories.

11 Turn the appliance Off and remove the power

cord from the electrical outlet when not in
use, before assembling or disassembling
parts and before cleaning. To unplug, grasp
the plug and pull from the electrical outlet.
Never pull from the power cord.

12 DO NOT abuse the power cord. Never carry

the appliance by the power cord or yank it
to disconnect from electrical outlet; instead
grasp the plug and pull to disconnect.

13 DO NOT operate any appliance with a

damaged cord or plug, or after the appliance
malfunctions, has been dropped or damaged
in any manner. This appliance has no
serviceable parts. Return the appliance to
SharkNinja Operating LLC for examination,
repair or adjustment.

14 DO NOT let the power cord hang over

the edge of table or counter or touch hot

surfaces such as the stove.
15 Always use appliance on a dry, level surface.
16 Keep hands, hair, clothing, as well as

utensils out of container while processing to

reduce the risk of severe injury to persons

or damage to the appliance. A scraper may

be used but only when the appliance is not

running.
17 Avoid contact with moving parts.
18 DO NOT attempt to sharpen blades.
19 DO NOT use the appliance if blade

assemblies are bent or damaged.
20 To reduce risk of injury, never place the

blade assemblies on the base without the

pitcher or Nutri Ninja cup properly attached.

21 DO NOT operate this appliance on or near

22 The use of attachments or accessories

23 DO NOT remove the container from the

24 To reduce the risk of injury, NEVER operate

25 DO NOT expose containers to extreme

26 DO NOT overfill.
27 DO NOT operate the appliance empty.
28 To reduce the risk of burns, always allow the

29 In the event that the unit overloads, the

30 THIS PRODUCT IS INTENDED FOR

31 The maximum rating is based on the

SAVE THESE
INSTRUCTIONS

any hot surfaces (such as gas or electric
burner or in a heated oven).

including canning jars, not recommended by
the manufacturer may result in fire, electric
shock or personal injury.

motor base while the appliance is in
operation.

the appliance without the lid in place; DO
NOT try to defeat the interlock mechanism;
make sure that the attachment is properly
installed before operating the appliance.

temperature changes.

appliance to cool before taking off parts and
before cleaning.

control panel lights will flash and the unit
will shut down. Unplug the appliance and let
it cool down for approximately 15 minutes
before using again.

HOUSEHOLD USE ONLY. Do not use this
appliance for anything other than its intended
use. Do not use outdoors.

Stacked Blade Assembly (pitcher) that drives
the greatest power and other recommended
attachments may draw significantly less
power or current.

1 2

www.ninjakitchen.com1-877-646-5288

Contents

Thank you for
purchasing the
Nutri Ninja® |
Ninja® Blender
with Auto-iQ™
Technology.

Getting to Know Your Nutri Ninja® | Ninja® Blender with Auto-iQ™ Technology .....................5

Before First Use . ...........................................................................................................7

Assembly and Use of the Pitcher ..................................................................................... 8

Assembly and Use of the Nutri Ninja® Cups .................................................................... 10

Programs, Speed Settings, & Uses for the Pitcher ..........................................................11

Programs, Speed Settings, & Uses for the Nutri Ninja Cups .............................................11

Care & Maintenance ....................................................................................................12

How to Clean .......................................................................................................... 12

How to Store ........................................................................................................... 12

Resetting the Motor Thermostat ...............................................................................12

Troubleshooting Guide ..................................................................................................13

Replacement Parts ....................................................................................................... 13

Available Accessories for the Nutri Ninja® | Ninja® Blender with Auto-iQ™ Technology .......14

Available Accessories .............................................................................................. 15

Assembly and Use of the Processor Bowl ..................................................................16

Assembly and Use of the Cutting Discs .....................................................................18

Assembly and Use of the Mini Prep Bowl ..................................................................19

Programs, Speed Setting & Uses for the Food Processor ...........................................20

Warranty & Registration ................................................................................................22

THIS BOOK COVERS MODEL NUMBER:

BL642W

TECHNICAL SPECIFICATIONS

Voltage: 120V~, 60Hz.
Power: 1500W

Pitcher Capacity: 72 oz. (9 cups, 2.1 L)
Max Liquid Capacity: 64 oz. (8 cups, 1.9 L)

Nutri Ninja® Cup Capacity: 18 oz. (2 cups, 530 mL)
24 oz. (3 cups, 710 mL)
32 oz. (4 cups, 950 mL)

3 4

www.ninjakitchen.com1-877-646-5288

Getting To Know Your Nutri Ninja® | Ninja® Blender
with Auto-iQ™ Technology

a

b

c

The Nutri Ninja® | Ninja® Blender with Auto-iQ™ Technology is a professional, high powered innovative tool with a sleek
design and outstanding performance, a true asset to any kitchen. The Nutri Ninja® | Ninja® Blender with Auto-iQ™
Technology features intelligent programs that combine unique pulsing, blending and pausing patterns that do the work
for you! Get great results every time with no guesswork required! For best results, be sure to carefully read all the
instructions contained in the manual before using this appliance.

d

e

f

Nutri Ninja® | Ninja® Blender with Auto-iQ™ Technology Features:

• Ninja Blade Technology

• BPA Free Pitcher, Nutri Ninja Cups and Lids

• Total Crushing™ Technology

g

i

h

j

• Drip-Free Pour Spout

• LED Control Panel with Timer

• Sturdy, Non-Slip Base

• Smart Lid technology for easy release

• 3 speeds: Low/Dough, Medium, & High

• 5 Auto-iQ Programs - Auto-iQ Frozen Drinks/Smoothies, Auto-iQ Puree, Nutri Ninja Auto-iQ Blend, Nutri Ninja Auto-iQ

Ultra Blend and Auto-iQ Pulse

• Nutri Ninja Nutrient & Vitamin Extraction*

* Extract a drink containing vitamins and nutrients from fruits and vegetables

a Jumbo Multi Serve 32 oz. Nutri
Ninja Cup

b Regular 24 oz. Nutri Ninja Cup

g Pitcher
h Pitcher Lid with Locking Handle
i Stacked Blade Assembly

j Motor Base
k Power Cord (not shown)

c Small 18 oz. Nutri Ninja Cup
d Pro Extractor Blades® Assembly
e Sip & Seal™ Lids (x3)
f Silicone Grip Sleeve (x3)

5 6

NOTE: Blade assemblies are not

interchangeable.

www.ninjakitchen.com1-877-646-5288

Before First Use

PLEASE KEEP THESE IMPORTANT
SAFEGUARDS IN MIND WHEN USING THE
APPLIANCE:

IMPORTANT: Make sure that the motor base

is plugged in for use.

IMPORTANT: Never add ingredients into the

container before placing the blade assembly
in first.

IMPORTANT: Blade assemblies are not

interchangeable.

IMPORTANT: DO NOT at tempt to operate the

appliance without the lid on.

IMPORTANT: Never run the appliance empty.

IMPORTANT: Appliance accessories are not

intended to be used in the microwave as it
may result in damage to the accessories.

WARNING: Stacked
Blade Assembly is
sharp and not locked in
place. If using the pour
spout, ensure the lid
is fully locked onto the
blender pitcher. Failure
to do so will result in a
risk of laceration.

WARNING: Stacked
Blade Assembly is sharp
and not locked in place.
If pouring with the lid
removed, carefully
remove the Stacked
Blade Assembly first,
holding it by the shaf t.
Failure to do so will
result in a risk of laceration.

CAUTION:

water or any other liquid.

Remove all packaging material and labels from the

1

appliance. Separate/remove all parts from each other.

2

Wash the lids, pitcher, Nutri Ninja® cups and Blade

Assemblies in warm, soapy water. When washing the
blade assemblies, use a dish-washing utensil with a
handle to avoid direct hand contact with blades.

WARNING: Handle the Blade Assemblies with
care when washing, as the blades are sharp.

3 Handle blade assemblies with care to avoid contact

with sharp edges. Rinse and air dry thoroughly.

4 The pitcher, Nutri Ninja cups, lids, Stacked Blade

Assembly and Pro Extractor Blades Assembly, are all
dishwasher safe. It is recommended that the lids and
blade assemblies be placed on the top rack. Ensure
that the blade assemblies are removed from the cup or
pitcher before placing in the dishwasher.

5 Wipe the motor base clean with a damp cloth.

Do not immerse the motor base into

Assembly and Use of the Pitcher

WARNING: Handle the Stacked Blade Assembly with care, as the blades are sharp.
WARNING: Remove utensils prior to processing. Failure to remove may cause the pitcher to be damaged or

to shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the

user being burned.

IMPORTANT: Make sure that the motor base is plugged in for use.

ASSEMBLY

Fig. 3a

OR

Fig. 5a

It’s best to add the liquid ingredients first and then the dry ingredients.

1 Review warning and caution statements above before

proceeding to number 2.

2 Place the motor base on a clean, dry, level surface such

as a counter or table top. Press down on the motor

base to make sure that the Suction Cups adhere to the

counter or table top.

3 Align and lower the Pitcher onto the motor base.

(Fig. 1) Handle should be aligned slightly to the right of

the “LOCK” symbol on the motor base.

4 Rotate the pitcher clockwise until it clicks in place. As

the pitcher rotates, it will lower and the safety tabs on

the bottom of the pitcher will slide under the safety tabs

on the top of the motor base. (Fig. 2)

5 The pitcher can be placed on the motor base two ways;

the handle can be on the front right corner or the front

left corner. (Fig. 3a, Fig. 3b)

6 Holding the Stacked Blade Assembly by the top of the

shaft, place it onto the drive gear inside the pitcher.

Ensure that the Stacked Blade Assembly is seated

properly and is standing upright. (Fig. 4)

NOTE: The Stacked Blade Assembly will fit loosely on

the drive gear.

Fig. 4Fig. 3bFig. 1 Fig. 2

7 Add the ingredients to the pitcher, making sure that

they do not exceed the highest measured marking line
on the side of the pitcher.

NOTE: If you need to add additional ingredients while

the appliance is processing, open the pour spout cap
and pour the ingredients in through the opening.

NOTE: When blending any kind of liquids, such as

mixtures of any drinks or smoothies, do not exceed the
“MAX” liquid mark (1.9 L) on the Pitcher.

8 Holding the lid by the handle in the upright position,

place it on top of the Pitcher aligning the triangle
( ) located on the lid with the triangle ( ) located on
the Pitcher’s handle. (Fig. 5a) Press the handle down
until you hear a click. The triangles on the lid and
the blender handle MUST be aligned in order for the
blender to turn on. (Fig. 5b)

IMPORTANT: As a safety feature, the power light

( ) will flash and the motor will not work if the
Pitcher and lid are not installed correctly. When
the Pitcher and lid are installed properly, the
power light ( ) will be solid, indicating that the
appliance is ready for use.

9 Plug the power cord into the electrical outlet and press

the power button ( ).

Fig. 5b

7 8

www.ninjakitchen.com1-877-646-5288

Assembly and Use of the Pitcher - cont.

USE REMOVAL

AUTO

Fig. 6

Fig. 9

Fig. 10

Fi g. 11

Assembly and Use of the Nutri Ninja® Cups

WARNING: Handle the Pro Extractor Blades® Assembly with care, as the blades are sharp.
WARNING: Remove utensils prior to processing. Failure to remove may cause the Nutri Ninja cup to be

damaged or to shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the

user being burned.

CAUTION: Remove the Pro Extractor Blades Assembly from the cup upon completion of blending. Some

ingredients have the potential to expand after blending resulting in excessive pressure buildup that can

pose a risk of injury.

IMPORTANT: Make sure that the motor base is plugged in for use.

ASSEMBLY USE REMOVAL

Fig. 1

TO
AU

Fig. 7

10 Review warning and caution statements on page 8

before proceeding.

NOTE: Nutri Ninja® | Ninja® Blender with Auto-iQ™

Technology can sense which jar is on the motor base.
The available function lights will illuminate depending
on which jar is placed on the motor base. (Fig. 6)

11 Press the power button to turn on the unit. Select

the speed or Auto-iQ program that best suits your
needs. The Auto-iQ program will stop the appliance
automatically at the end of the program. (Fig. 7)

NOTE: Pulse ingredients for even chopping by holding

the Auto-iQ Pulse button until your desired consistency
is reached.

12 To pause the appliance, press the selected speed or

Auto-iQ program a second time. When the program is
paused, the light on the program button will flash until
you press it again to resume the rest of the program.

13 When you have reached your desired consistency, stop

the appliance by pressing the power button ( ) and
wait for the blade to stop turning. (Fig. 8)

14 Turn the pitcher counter clockwise to remove and then

lift off the base. (Fig. 9)

9 10

Fig. 8

WARNING: Never inser t your hands in the pitcher

as the Stacked Blade Assembly is sharp. Always
use a spatula to dislodge food that has stuck to
the sides of the pitcher.

15 Open the pour spout cap and use the spout to empty

liquid contents.

16 For thicker consistencies, first remove the lid by

pressing the release button and pulling the lid handle
up to a 90 degree angle to lift lid off the pitcher. Then,
carefully remove the Stacked Blade Assembly by the
top of the shaft. Place Stacked Blade Assembly away
from the work area to avoid accidental contact. Finally,
empty contents from the pitcher. (Fig. 10)

17 Make sure that the unit is unplugged when not in use.

18 To release the motor base from the counter or table top,

place your hands underneath both sides of the motor
base and gently pull the unit up and towards you.

(F ig. 11)

Fig. 2 Fig. 3

NOTE: Nutri Ninja® | Ninja® Blender with Auto-iQ™ Technology

can sense which jar is on the motor base. The available

function lights will illuminate depending on which jar is placed

on the motor base. (Fig. 1)

1 Review warning and caution statements above before

proceeding to number 2.

2 Place the motor base on a clean, dry, level surface such as a

counter or table top. Press down on the motor base to make

sure that the suction cups adhere to the counter or table top.

3 Add ingredients to the Nutri Ninja cup.

4 Place the Pro Extractor Blades® onto the cup and tightly

screw it on clockwise until you have a good seal. (Fig. 2)

5 Turn the Nutri Ninja cup upside down and place it onto the

motor base, aligning the tabs on the cup with the motor base.

Rotate the Nutri Ninja cup clockwise until it locks in place, you

will hear a click when the lock is engaged. (Fig. 3)

6 Press the power button on, and select the speed or Auto-iQ

program that suits your needs. (Fig. 4) The Auto-iQ program

will stop the appliance automatically at the end of the

program.

Fig. 4 Fig. 5 Fig. 6

7 To pause the appliance, press the selected speed or Auto-iQ

program a second time. When the program is paused, the
light on the program button will flash until you press it again
to resume the rest of the program.

8 Once you have reached your desired consistency, stop the

appliance by pressing the power button and wait for the blade
to stop turning. Turn the Nutri Ninja cup counter-clockwise
and pull straight up to remove. (Fig. 5, Fig. 6)

NOTE: Do not overfill! To avoid spilling, do not add ingredients

past the “Max Liquid” line.

9 Turn the cup upright and remove the Pro Extractor Blades by

twisting the Pro Extractor Blades counter clockwise.

10 Place the Sip & Seal® lid onto the Nutri Ninja cup, twist to seal

and enjoy!

11 Make sure that the motor base is unplugged when not in use.

12 To release the motor base from

the counter or table top, place your
hands underneath both sides of the
motor base and gently pull the unit
up and towards you.

www.ninjakitchen.com1-877-646-5288

Programs, Speed Settings & Uses for the Pitcher

Care & Maintenance

FUNCTION CONTAINER

Processing Pitcher

Chopping Pitcher

Frozen Drinks /

Ice Crush

Pureeing Pitcher

* When blending soups, make sure they’re cooled to room temperature first - Ninja® containers are not intended for hot blending.

Pitcher

BLADE

TYPE

Stacked Blade

Assembly

Stacked Blade

Assembly

Stacked Blade

Assembly

Stacked Blade

Assembly

SPEED or

PROGRAM

Auto-iQ™ Puree

Medium

Auto-iQ Pulse

High

Auto-iQ Frozen Drinks/

Smoothies

Auto-iQ Puree

TYPE OF FOOD

Dips

Batters

Salsa

Vegetables

Nuts

Ice

Frozen Drinks

Smoothies

Milkshakes

Soups*

Programs, Speed Settings & Uses for the Nutri Ninja® Cup

FUNCTION CONTAINER

Smoothies Nutri Ninja® Cup

Green Smoothies Nutri Ninja Cup

Grating Nutri Ninja Cup

Chopping Nutri Ninja Cup

BLADE

TYPE

Pro Extractor

Blades®

Assembly

Pro Extractor

Blades

Assembly

Pro Extractor

Blades

Assembly

Pro Extractor

Blades

Assembly

SPEED or

PROGRAM

Nutri Ninja Auto-iQ Blend

Nutri Ninja Auto-iQ Ultra

Blend

Auto-iQ Pulse

High

Auto-iQ Pulse

High

TYPE OF FOOD

Smoothies

Frappes

Milkshakes

Protein Drinks

Frozen Fruits

Frozen Vegetables

Kale

Celery

Spinach

Seeds

Ice

Grated Cheese
Bread Crumbs

Spices

Salsa

Vegetables

Nuts

HOW TO CLEAN

CAUTION: Make sure that the motor base is

unplugged from the power source before inserting

or removing any blade assembly and before

cleaning.

CAUTION: DO NOT immerse the motor base into

water or any other liquid.

1 Separate/remove all parts from each other.

2

Hand Washing: Wash the lids, pitcher, Nutri Ninja®

cup, and blade assemblies in warm, soapy water. When

washing the blade assemblies, use a dish-washing

utensil with a handle to avoid direct hand contact with

blades. Handle blade assemblies with care to avoid

contact with sharp edges. Rinse and air dry thoroughly.

Dishwasher: The containers, lids, blade assemblies

and attachments are all dishwasher safe. The lids

and blade assemblies are top rack dishwasher safe.

Ensure that the blade assemblies are removed from the

containers before placing in the dishwasher.

WARNING: Handle the Stacked Blade Assembly,

and Pro Extractor Blades Assembly with care

when washing, as the blades are sharp. Contact

with the blades’ edges can result in laceration.

3

Wipe the motor base clean with a damp cloth

Please call customer service if any servicing needs to be

performed on the appliance at 1-877-646-5288.

.

HOW TO STORE

1 Store the

Nutri Ninja® | Ninja® Blender with Auto-iQ™
Technology
the corresponding container with the lid secured on
top. Do not place anything on top. Store the rest of
the attachments in a safe place where they will not be
damaged and won’t cause harm.
around the cord wrap on the back of the motor base.

upright

with the blade assembly inside

Wrap the power cord

RESETTING THE MOTOR THERMOSTAT

The Nutri Ninja | Ninja Blender with Auto-iQ Technology

features a unique safety system which prevents
damage to the unit’s motor and drive system should you
inadvertently overload your appliance. If the appliance

is being overloaded, the motor will stop. Allow
the appliance to cool for approximately 15
minutes. To reset the appliance, follow the resetting

procedure below:

1

Unplug the appliance from the electrical outlet.

2

Remove and empty the container and ensure that no

food is jamming the blade assembly or cutting disc.

3

Allow the appliance to cool for approximately 15

minutes.

4

Re-install the container onto the base and re-plug the

appliance into the electrical outlet.

5

Proceed to use the appliance as before making sure not
to exceed the recommended maximum capacities.

11 12

www.ninjakitchen.com1-877-646-5288

Troubleshooting Guide

Available Accessories for the Nutri Ninja® | Ninja

®

PROBLEMS POSSIBLE REASONS & SOLUTIONS

Motor Doesn’t Start or Blade
Assembly Doesn’t Rotate.

Food is Unevenly Chopped.

Food is Chopped Too Fine or is
Too Watery.

Food Collects On Lid or On the
Sides of the Container.

You Cannot Achieve Snow
From Solid Ice.

Motor Base Won’t Stick to
Counter or Table Top.

Make sure the container is securely placed on motor base.

Make sure the lid is securely on container in the correct position (align
arrows).

The appliance is turned “Off”. Press the power button ( ) to turn “On”.

Check that the plug is securely inserted into the electrical outlet.

Check the fuse or circuit breaker.

The unit has overloaded. The appliance will stop and the power light will
flash. Unplug and wait approximately 15 minutes before using again.

The unit has overheated. Unplug and wait approximately 15 minutes before
using again.

Check to make sure the unit is not overloaded.

Either you are chopping too much food at one time, or the pieces are not of
even size and processing smaller amounts per batch.

The food has been over processed. Use Auto-iQ™ Pulse button for
controlled processing.

The mixture is too thick. Add more liquid.

Do not use ice that has been sitting out or has started to melt. Use ice
straight from the freezer.

Start with a few pulses and then go to a continuous blending cycle.

Make sure surface and suction feet are wiped clean. Suction feet will only
stick to smooth surfaces. Suction feet WILL NOT stick on some surfaces
such as, wood, tile and non-polished finishes.

DO NOT attempt to use appliance when the motor base is stuck to a
surface that is not secure, (cutting board, platter, plates, etc.).

Blender with Auto-iQ™ Technology

Thank you for purchasing your Nutri Ninja® | Ninja® Blender with Auto-iQ™ Technology. You may have purchased some of
the following additional accessories. Please refer to the assembly and usage instructions on the next few pages for the
accessories you purchased.

To purchase the additional accessories shown below, please call customer service at 1-877-646-5288.

Your Ninja is able to detect which jar is on the base. You may be trying

You get an “Err” Message

You have a blinking red light

to use a program that is not designed for the jar you have installed. The
programs will light up indicating which programs are available for each jar.

The unit is not installed properly. For your safety the unit will only be able to
be turned on when it is properly assembled. Please refer to the assembly
pages of this inspiration guide for assistance.

Replacement Parts

ORDERING REPLACEMENT PARTS

To order additional parts and attachments, please visit our website: www.ninjakitchen.com
or feel free to contact customer service: 1-877-646-5288.

13 14

www.ninjakitchen.com1-877-646-5288

Available Accessories

AU

TO

BLEND

BLAST

FROZEN DRINKS

SMOOTHIES

FOOD
PUREE

NutriNinja

NutriNinja

PULSE

HIGH

MED

ON
OFF

1500

WATTS

LOW

AU

TO

AU

TO

AU

TO

A

UTO

BLEND

A

UTO

BLAST

FROZEN DRINKS

SMOOTHIES

FOOD
PUREE

NutriNinja

NutriNinja

PULSE

HIGH

MED

ON
OFF

1500
WATTS

LOW

AU

TO

AU

TO

AU

TO

A

UTO

BLEND

A

UTO

BLAST

FROZEN DRINKS

SMOOTHIES

FOOD
PUREE

NutriNinja

NutriNinja

PULSE

HIGH

MED

ON
OFF

1500
WATTS

LOW

AU

TO

AU

TO

AU

TO

A

UTO

BLEND

A

UTO

BLAST

FROZEN DRINKS

SMOOTHIES

FOOD
PUREE

NutriNinja

NutriNinja

PULSE

HIGH

MED

ON
OFF

1500
WATTS

LOW

AU

TO

AU

TO

AU

TO

A

UTO

BLEND

A

UTO

BLAST

FROZEN DRINKS

SMOOTHIES

FOOD
PUREE

NutriNinja

NutriNinja

PULSE

HIGH

MED

ON
OFF

1500

WATTS

LOW

AU

TO

AU

TO

AU

TO

A

UTO

BLEND

A

UTO

BLAST

FROZEN DRINKS
SMOOTHIES

PUREE

PULSE

HIGH

MED

LOW /

DOUGH

AUTO

AUTO

AUTO

a

e

Assembly and Use of the Processor Bowl

WARNING: Chopping Blade Assembly is sharp and not locked in place. Before emptying contents carefully

remove lid and Chopping Blade Assembly, holding it by the shaft. Failure to do will result in risk of
laceration.

WARNING: Remove utensils prior to processing. Failure to remove may cause the bowl to be damaged or to

shatter, which may cause personal injury.

c d

b

WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the

user being burned.

CAUTION: Remove the lid from the bowl upon completion of processing. Some ingredients have the potential

to expand after blending resulting in excessive pressure buildup that can pose a risk of injury.

IMPORTANT: Make sure that the motor base is plugged in for use.

ASSEMBLY

h

a Food Processor Bowl
b Food Processor Lid
c Chopping Blade Assembly
d Dough Blade Assembly

WARNING: Handle the Blade Assemblies and

Discs with care when washing, as the blades
are sharp. When handling the blade assemblies,
always hold by the shaf t. When handling the
grating, slicing/shredding discs, use the finger
holes to hold.

1 Remove all packaging material and labels from the

accessories.

2 Wash the lids, food processor bowl, mini prep bowl,

discs, and blade assemblies in warm, soapy water.
When washing the blade assemblies or the discs, use a
dish-washing utensil with a handle to avoid direct hand
contact with blades.

f

i

e Feed Chute Lid
f Slicing/Shredding Disc
g Grating Disc

3

Handle blade assemblies and disc with care to avoid

4 The food processor bowl, mini prep bowl, disc, lids

5 Wipe the motor base clean with a damp cloth.

g

j

h 24 oz. Mini Prep Bowl
i Spindle for Discs & Mini Prep Bowl
j Mini Prep Bowl Blade Assembly

contact with sharp edges. Rinse and air dry thoroughly.

and blade assemblies are all dishwasher safe. It is
recommended that the lids and blade/disc assemblies
be placed on the top rack. Ensure that the blades/discs
are removed from the containers before placing in the
dishwasher.

Fig. 1

Fig. 4a

OR

NOTE: Nutri Ninja® | Ninja® Blender with Auto-iQ™

Technology can sense which jar is on the motor base.
The available function lights will illuminate depending
on which jar is placed on the motor base. (Fig. 1)

1 Review warning and caution statements above before

proceeding to number 2.

2 Place the motor base on a clean, dry, level surface such as a

counter or table top. Press down on the motor base to make
sure that the suction cups adhere to the counter or table top.

3 Holding the desired blade assembly by the top of the

shaft, place it onto the drive gear inside the bowl.
Ensure that the blade assembly is seated properly and
is standing upright. (Fig. 2)

NOTE: The blade will fit loosely on the drive gear.

3 Align and lower the Processor Bowl onto the motor

base. (Fig. 3) Handle should be aligned slightly to the
right of the “LOCK” symbol on the motor base.

4 Rotate the bowl clockwise until it locks in place, you will

hear a click when the lock is engaged. (Fig. 4)

5 The bowl can be placed on the motor base two ways;

the handle can be on the front right corner or the front
left corner. (Fig. 5a, Fig. 5b)

Fig. 6b

Fig. 5 Fig. 6aFig. 2 Fig. 4bFig. 3

Add the ingredients to the bowl, making sure that they

6

do not exceed the highest measured marking line on
the side of the bowl.

7 Holding the lid by the handle in the upright position,

place it on top of the Processor Bowl aligning the
triangle ( ) located on the lid with the triangle ( )
located on the Processor Bowl handle. (Fig. 6a) Press
the handle down until you hear a click. The triangles on
the lid and the Processor Bowl handle MUST be aligned
in order for the blender to turn on. ( Fig. 6b)

NOTE: The 64 oz. bowl is not intended for blending

drinks. Do not overfill.

8 Plug the power cord into the electrical outlet and press

the power button ( ).

NOTE: As a safety feature, the power button ( ) will

flash and the motor will not work if the bowl and lid
are not installed correctly. When the bowl and lid
are installed properly, the power button ( ) will be
solid, indicating that the appliance is ready for use.

15 16

www.ninjakitchen.com1-877-646-5288

Assembly and Use of the Processor Bowl - cont.

REMOVALUSE

CHOPPING BLADE

ASSEMBLY

Fig. 2 Fig. 3 Fig. 5Fig. 1

USING THE CHOPPING BLADE ASSEMBLY

1 Review warning and caution statements on page 16

before proceeding to number 2.

2 Place the motor base on a clean, dry, level surface such

as a counter or table top. Press down on the motor
base to make sure that the suction cups adhere to the
counter or table top.

3 Secure the bowl onto the motor base.
4 Holding the Chopping Blade Assembly by the shaft,

place it onto the gear shaft inside the bowl. Ensure that
the Chopping Blade Assembly fits around the gear shaft
and that it is standing straight. (Fig. 1)

5 Add the ingredients and secure the bowl lid onto the

bowl.

6 Plug the power cord into the electrical outlet and press

on the power button ( ). Select the speed or Auto-iQ™
program that best suits your needs. Pulse ingredients
for even chopping by holding the Auto-iQ Pulse button
until your desired consistency is reached.

NOTE: Please refer to “Speed Settings & Uses” chart

for suggested uses and speeds.

7 When you have reached your desired consistency, stop

the appliance by pressing the power button ( ) and
wait for the blade to stop turning. (Fig. 2)

8 To remove the lid, press the release button on the lid

and pull the lid handle up to a 90° angle. (Fig. 2)

9 Turn the bowl counter-clockwise and lift it to remove it

from the motor base. (Fig. 3)

10 To release the motor base from the counter or table top,

place your hands underneath both sides of the motor
base and gently pull the unit up and towards you.

(Fig. 4)

Fig. 4

USING THE DOUGH BLADE ASSEMBLY

1 Review warning and caution statements on page 16

before proceeding to number 2.

2 Place the motor base on a clean, dry, level surface such

as a counter or table top. Press down on the motor
base to make sure that the suction cups adhere to the
counter or table top.

3 Secure the bowl onto the motor base.
4 Holding the Dough Blade Assembly by the shaft, place

it onto the gear shaft inside the bowl. Ensure that the
Dough Blade Assembly fits around the gear shaft and
that it is standing straight. (Fig. 5)

Add the ingredients and secure the bowl lid onto the

5

bowl.

6 Plug the power cord into the electrical outlet and press

on the power button ( ). Select the LOW/DOUGH
button and process until ingredients come together to
form a mass.

NOTE: Please refer to “Speed Settings & Uses” chart

for suggested uses and speeds.

7 Once finished making dough, stop the appliance by

pressing the power button ( ) and wait for the blade to
stop turning.

8 To remove the lid, press the release button on the lid

and pull the lid handle up to a 90° angle. (Fig. 2)

9 Turn the bowl counter-clockwise and lift it to remove it

from the motor base. (Fig. 3)

To release the motor base from the counter or table top,

10

place your hands underneath both sides of the motor
base and gently pull the unit up and towards you.

(Fig. 4)

USE

DOUGH BLADE

ASSEMBLY

Assembly and Use of the Cutting Discs

WARNING: The Cutting Discs are sharp. Always use the finger holes when placing or removing the cutting

discs. Failure to do so will result in a risk of laceration.

WARNING: Remove utensils prior to processing. Failure to remove may cause the bowl to be damaged or to

shatter, which may cause personal injury.

WARNING: Never leave the appliance unattended while in use.

IMPORTANT: Make sure that the motor base is plugged in for use.

IM POR TA N T: Use only the LOW/DOUGH setting

when using either disc.

NOTE: The feed chute lid features a two part pusher

to guide food through the chute. Use the full pusher
for larger items such as cucumbers. Twist and pull to
remove the smaller pusher and use the narrow chute
for smaller items such as carrots.

NOTE: The Slicing/Shredding Disc is reversible. Use the

side labeled “Slicer” for Slicing. Carefully flip the disc
over to the side labeled “Shredder” for shredding.

1 Review warning statements at the top before

proceeding to number 2.

2 Place the motor base on a clean, dry, level surface such

as a counter or table top. Press down on the motor
base to make sure that the suction cups adhere to the
counter or table top.(Fig. 6)

3 Secure the bowl onto the motor base.
4 Place the spindle inside the bowl.
5 Use the finger holes to grasp the selected disc and

place it over the spindle.

6 Place the feed chute lid on the bowl and turn clockwise

until you hear a click indicating the lid is locked in
place. (Fig. 6)

7 Plug the power cord into the electrical outlet and press

up on the power toggle ( ) to turn the power “On”.

8 Select LOW/DOUGH on the control panel. The discs will

begin spinning.

9 Add the food that you want to slice, shred or grate

through the feed chute on the lid. (Fig. 6) Use the
two-part food pusher to help guide the food through
the feed chute. The middle piece of the food pusher is
removable to use for smaller ingredients.

10 When finished,stop the appliance by pressing the power

button ( ) and wait for the disc to stop turning. Press
the button on the feed chute lid located near the handle
to unlock and turn the lid counter-clockwise. Lift to
remove from the processor bowl. Using the finger holes,
carefully lift the disc out of the bowl and remove the
spindle.

11 To release the motor base from the counter or table top,

Fig. 6

place your hands underneath both sides of the motor
base and gently pull the unit up and towards you.

(Fig. 4)

17 18

www.ninjakitchen.com1-877-646-5288

Assembly and Use of the Mini Prep Bowl

WARNING: Handle the Mini Prep Bowl blade assembly with care as the blades are sharp, and not locked in place.

Before emptying the contents of the Mini Prep Bowl, carefully remove the Blade Assembly first, holding it by the shaft.
Failure to do so will result in a risk of laceration.

WARNING: Remove utensils prior to processing. Failure to remove may cause the Mini Prep Bowl to be damaged or to

shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Remove the lid from the Mini Prep Bowl upon completion of processing.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the user being

burned.

IMPORTANT: Make sure that the motor base is plugged in for use.

ASSEMBLY

Fig. 1

Fig. 3

1 Review warning and caution statements above before

proceeding to number 2.

NOTE: The mini prep bowl must be used with the flat

food processor lid.

2 Place the 64 oz. bowl onto the motor base.
3 Holding the spindle by the shaft, place it onto the gear shaft

inside the 64 oz. bowl. Ensure that the Mini Prep Bowl Blade

Assembly fits around the gear shaft and that it is standing

straight. (F ig. 1)

4 Place the mini prep bowl aligning the spindle inside the center

post. (Fig. 2)

5 Hold the Mini Prep Bowl Blade Assembly by the shaft and

carefully place it over the center post of the mini prep bowl.

(Fig. 3)

6 Add ingredients into the mini prep bowl.

NOTE: Do not fill ingredients past the “MAX” fill line.

7 Holding the lid by the handle in the upright position, place it

on top of the 64 oz. bowl aligning the arrow ( ) located on

the lid with the arrow ( ) located on the bowl’s handle.

(Fig. 4) Press the handle down until you hear a click.

Fig. 2

Fig. 4

USE

Fig. 5

8 Plug the power cord into the electrical outlet and press on the

power button ( ).

9 Select the speed that best suits your needs. For best results,

hold the Auto-iQ™ Pulse button down until you have reached
your desired consistency. (Fig. 5)

NOTE: Please refer to “Speed Settings & Uses” chart for

suggested uses and speeds.

10 When you have reached your desired consistency, stop the

appliance by pressing the power button ( ) and wait for the
Mini Prep Bowl Blade Assembly to stop turning.

11 To remove the lid, pull the lid handle up to a 90° angle and lift

the lid off. (Fig. 6)

12 Carefully hold the Mini Prep Bowl Blade Assembly by the shaft

and lift it out of the mini prep bowl. (Fig. 7)

13 Turn the bowl counter clockwise and then lift off the base.
14 To release the motor base from the counter or table top, place

your hands underneath both sides of the motor base and
gently pull the unit up and towards you. (Fig. 8)

REMOVAL

Fig. 6 Fig. 7

Fig. 8

Programs, Speed Settings & Uses for the Food Processor

FUNCTION CONTAINER BLADE TYPE

Mincing

Kneading and
Dough Mixing

Processing

Emulsifying

Grinding

Grating

Chopping

Batters

Slicing/Shredding

* When blending sauces and soups, make sure they’re cooled to room temperature first -

Ninja® containers are not intended for hot blending.

Food Processor

Bowl

Food Processor

Bowl

Food Processor

Bowl

Food Processor

Bowl

Food Processor

Bowl

Food Processor

Bowl

Food Processor

Bowl

Food Processor

Bowl

Food Processor

Bowl

Chopping Blade

Assembly

Dough Blade

Assembly

Chopping Blade

Assembly

Chopping Blade

Assembly

Chopping Blade

Assembly

Chopping Blade

Assembly

Grating Disc

Chopping Blade

Assembly

Dough Blade

Assembly

Reversible Slicing/

Shredding Disc

SPEED or

PROGRAM

Auto-iQ™ Pulse

Low/Dough

Auto-iQ Puree

Low/Dough

Medium

High

Low/Dough

Medium

Medium Meat

Auto-iQ Pulse

Low/Dough (when

using Disc)

Auto-iQ Pulse

Low/Dough

Low/Dough

TYPE OF FOOD

Onion
Garlic
Herbs

Bread Dough

Pie Dough

Pizza Dough
Pretzel Dough
Cookie Dough

Pâtés

Stewed Fruits

Dips

Apple Sauce

Spreads

Baby Food

Salad Dressings

Dips

Sauces*

Grated Cheese
Bread Crumbs

Spices

Salsa

Vegetables

Nuts

Cake Mixes

Batters

Vegetables

Cheese

19 20

www.ninjakitchen.com1-877-646-5288

Notes

ONE (1) YEAR LIMITED WARRANTY

SharkNinja Operating LLC warrants this product to be free from material defects and workmanship for a period of one (1)

year from the date of purchase when utilized for normal household use, subject to the following conditions, exclusions and
exceptions.

The liability of SharkNinja Operating LLC is limited solely to the cost of the repair or replacement of the unit at our option.
This Limited Warranty does not cover normal wear of parts and does not apply to any unit that has been tampered with or
used for commercial purposes. This Limited Warranty does not cover damage caused by misuse, abuse, negligent handling or
damage due to faulty packaging or mishandling in transit. This Limited Warranty does not cover damage or defects caused by
or resulting from damages from shipping or repairs, service or alteration to the product or any of its parts, which have been
performed by a repair person not authorized by SharkNinja Operating LLC.

If your appliance fails to operate properly while in use under normal household conditions within the Limited Warranty period,
you may return the complete appliance and accessories with proof of purchase and date, freight prepaid. For Customer Service
support, call 1-877-646-5288 or visit our website www.ninjakitchen.com.

If the appliance is found by SharkNinja Operating LLC to be defective, in SharkNinja Operating LLC’s sole discretion, we
will repair or replace it free of charge. Proof of purchase date and a check made payable to SharkNinja Operating LLC in the
amount of $19.95 to cover the cost of return shipping and handling must be included.*

This Limited Warranty is extended to the original purchaser of the unit and excludes all other legal, implied and/or conventional
warranties. The responsibility of SharkNinja Operating LLC if any, is limited to the specific obligations expressly assumed
by it under the terms of this Limited Warranty. In no event is SharkNinja Operating LLC liable for incidental or consequential
damages to anyone of any nature whatsoever. Some states do not permit the exclusion or limitation of incidental or
consequential damages, so the above may not apply to you.

This Limited Warranty gives you specific legal rights, and you may also have other rights which vary from state to state or from
province to province.

*IMPORTANT: Carefully pack item to avoid damage in shipping. Be sure to include proof of purchase date and

to attach tag to item before packing with your name, complete address and phone number with a note giving

purchase information, model number and what you believe is the problem with the item. We recommend you insure

the package (as damage in shipping is not covered by your Limited Warranty). Mark the outside of your package

“ATTENTION CUSTOMER SERVICE”.

PRODUCT REGISTRATION

Please visit www.ninjakitchen.com or call 1-877-646-5288 to register your new Ninja® product within ten (10) days of
purchase. You will be asked to provide the store name, date of purchase and model number along with your name and address.

The registration will enable us to contact you in the unlikely event of a product safety notification. By registering you
acknowledge to have read and understood the instructions for use, and warnings set forth in the accompanying instructions.

21 22

www.ninjakitchen.com1-877-646-5288

SharkNinja Operating LLC
US: Newton, MA 02459
CAN: Ville St-Laurent, QC H4S 1A7

1-877-646-5288
www.ninjakitchen.com

Ninja, Nutri Ninja, Pro Extractor Blades and Sip & Seal are registered trademarks

of SharkNinja Operating LLC.

Auto-iQ and Total Crushing are trademarks of SharkNinja Operating LLC.

Illustrations may differ from actual product. We are constantly striving to improve our
products, therefore the specifications contained herein are subject to change without notice.

For SharkNinja U.S. Patent information visit www.sharkninja.com/USPatents.

© 2016 SharkNinja Operating LLC
BL642W_30_E_160121_2
PRINTED IN CHINA