Ninja BL642UK Instruction manual

Download

BL642UK

OWNER’S GUIDE

www.ninjakitchen.eu

0800 862 0453

IMPORTANT SAFETY INSTRUCTIONS

For Household Use Only

WHEN USING ELECTRICAL APPLIANCES, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED, INCLUDING THE FOLLOWING:

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:

1 WARNING: Remove utensils prior to processing.

READ ALL INSTRUCTIONS BEFORE USING YOUR NUTRI NINJA® | NINJA® BLENDER WITH AUTO-IQ® TECHNOLOGY.

2 WARNING: The blade assemblies are

WARNING: Extension cords are

not recommended for use with this product.

WARNING: The blades are not

afﬁxed to the unit. They are removable and very sharp. Handle with care!

CAUTION: ln order to avoid a

hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.

IMPORTANT: This appliance is not

intended for use by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Children shall not use or play with this appliance. Close supervision is necessary to keep appliance and cord out of reach of children during use.

6 CAUTION: Remove the Pro Extractor Blades

7 To protect against electrical shock, do not submerge

8 DO NOT allow the appliance to be used by children.

9 Never leave an appliance unattended when in use.

WARNING:

Failure to remove may cause the jar to be damaged or to shatter which may cause personal injury.

sharp, not locked in place and removable, handle with care. When handling the blade assemblies, always hold by the shaft. Failure to do so will result in a risk of laceration.

WARNING: Stacked Blade Assembly is sharp and not locked in place. If using the pour spout, ensure the lid is fully locked onto the pitcher. If pouring with the lid removed, carefully remove the Stacked Blade Assembly ﬁrst, holding it by the shaft. Failure to do so will result in a risk of laceration.

CAUTION: Do not blend hot liquids, doing so may cause excessive pressure build-up, resulting in risk of the user being burned.

CAUTION: We do not recommend grinding in any of our Nutri Ninja

Assembly from the Nutri Ninja cup upon completion of blending. Do not store ingredients before or after blending them in the cup with the blade assembly attached. Some foods may contain active ingredients or release gases that will expand if left in a sealed container, resulting in excessive pressure buildup that can pose a risk of injury. For ingredient storage in the cup, use only Sip & Seal Lid to cover.

the appliance or allow the power cord to come into contact with water or any otherliquid.

Close attention is necessary when used near children. This is not a toy.

cups.

SAVE THESE

INSTRUCTIONS

0800 862 0453

10 Turn the appliance off and remove the power cord

from the electrical outlet when not in use, before assembling or disassembling parts, accessing parts that move while in use and before cleaning. To unplug, grasp the plug and pull from the electrical outlet. Never pull from the power cord.

11 DO NOT abuse the power cord. Never carry the appliance

by the power cord or yank it to disconnect from electrical outlet; instead, grasp the plug and pull to disconnect.

12 DO NOT use with damaged supply cord or plug.

If the supply cord or plug is damaged, it must be replaced by the manufacturer, a service center or similar qualiﬁed persons in order to avoid hazard.

13 DO NOT USE if the appliance is not working, has been

dropped, dropped into water, damaged or left outdoors.

14 NO SERVICEABLE PARTS. Incorrect re-assembly or

repair can cause a risk of electrical shock or injury to persons when the appliance is used. Contact Customer Service or a Service Center for the repair

or replacement under the warranty agreement. 15 Always use the appliance on a dry, level surface. 16 Keep hands, hair, clothing, as well as utensils out

of container while processing or blending to reduce

the risk of severe injury to persons or damage to the

appliance. A scraper may be used but only when the

appliance is not running. 17 Avoid contact with moving parts. 18 DO NOT attempt to sharpen blades. 19 DO NOT use the appliance if either set of blades are

bent or damaged. 20 To reduce the risk of injury, never assemble the blade

assemblies in the containers without the pitcher or

the bowl being properly attached to the motor base. 21 DO NOT operate this appliance on or near any hot

surfaces (such as gas or electric burner or in a

heated oven). 22 The use of attachments or accessories including

canning jars, not recommended by the manufacturer

may result in ﬁre, electric shock or personal injury. 23 DO NOT remove any container from the motor base

while the appliance is in operation. Always unplug

the unit when not in use.

24 To reduce risk of injury, never place the blade

assemblies on the base without the pitcher or Nutri

Ninja

cup properly attached.

25 To reduce the risk of injury, NEVER operate the

appliance without the lid in place; DO NOT try to defeat or bypass the interlock mechanism. When using the removable blades, make sure they are properly installed before operating the appliance.

26 DO NOT expose containers to extreme temperature

changes.

27 DO NOT let the power cord hang over the edge of table

or counter or touch hot surfaces such as the stove. 28 DO NOT overﬁll. DO NOT exceed “MAX” ﬁll line. 29 DO NOT operate the appliance empty. 30 To reduce the risk of burns, always allow the appliance

to cool before taking off parts and before cleaning. 31 Max ON time is 60 seconds under 1500W load.

If the appliance overheats, a thermal switch will

become activated and shut off the motor. To reset,

unplug the appliance and let it cool down for

approximately 15 minutes before using again. 32 In the event that the unit overloads, the control panel

lights will ﬂash and the unit will shut down. Unplug

the appliance and let it cool down for approximately

15 minutes before using again. 33 Max PULSE iteration is 30 Pulses. After 30 Pulses

allow 10 minutes to pass before running the PULSE

function up to an additional 30 Pulses. 34 The maximum rating is based on the Stacked Blade

Assembly (pitcher) that drives the greatest power

and other recommended attachments may draw

signiﬁcantly less power or current. 35 To avoid injury, never attempt to place the Pro

Extractor Blade

™

onto the motor base without ﬁrst

assembling the blade assembly to the Nutri Ninja Cup. 36 DO NOT push food into the food chute with your

ﬁngers. Always use the food pusher provided. 37 Appliance accessories are not intended to be used

in the microwave as it may result in damage to the

accessories. 38 THIS PRODUCT IS INTENDED FOR HOUSEHOLD

USE ONLY. Do not use this appliance for anything

other than its intended use. Do not use outdoors.

www.ninjakitchen.eu

This appliance complies with the WEEE-Directive 2012/19/EU on the disposal of electrical and electronic equipment (WEEE).

This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material sources. To return your used device, please use the return and collection systems or contact the retailer where this product was purchased. They can take this product for environmental safe recycling.

This appliance complies with the European directives for electromagnetic compatibility (EMC) 2014/30/EU and its revisions, as well as Low Voltage Directive (LVD) 2014/35/EU and its revisions.

Guarantee: This product is unconditionally guaranteed for one year against all defects of workmanship and materials. This guarantee does not affect your statutory rights. If this product proves unsatisfactory please contact our customer service department on freephone 0800 862 0453 or by e-mail ukservice@euro-pro.com.

THIS BOOK COVERS MODEL NUMBERS:

BL642UK 30

TECHNICAL SPECIFICATIONS Voltage: 220-240V~, 50/60Hz. Power: 1500W Pitcher Capacity: 2.1L Max Liquid: 2L

Nutri Ninja Cup Capacity: 500ml 650ml 900ml

0800 862 0453

Contents

Thank you for purchasing The Nutri Ninja® | Ninja® Blender with Auto-iQ® Technology.

Getting to Know Your Nutri Ninja | Ninja Blender with Auto-iQ Technology ........................... 5

Before First Use. ............................................................................................................7

Assembly and Use for the Ninja Blender .......................................................................... 8

Assembly and Use for the Nutri Ninja Cups ....................................................................10

Programs, Speed Settings, & Uses for the Pitcher ..........................................................12

Programs, Speed Settings, & Uses for the Nutri Ninja Cups ............................................. 12

Care & Maintenance ....................................................................................................13

Troubleshooting Guide ..................................................................................................14

www.ninjakitchen.eu

Getting To Know Your Nutri Ninja® | Ninja® Blender with Auto-iQ® Technology

d e

a 900ml Nutri Ninja Cup b 650ml Nutri Ninja Cup c 500ml Nutri Ninja Cup d Pro Extractor Blades™ Assembly e Sip & Seal® Lid

0800 862 0453

f Pitcher g Blender Lid with locking handle h Stacked Blade Assembly (blender)

i Motor Base

The Nutri Ninja® | Ninja® Blender with Auto-iQ® Technology is a high powered innovative tool with a sleek design and outstanding performance, a true asset to any kitchen. The Nutri Ninja | Ninja Blender with Auto-iQ Technology features intelligent programs that combine pulsing, blending and pausing patterns that do the work for you! Get great results every time with no guesswork required! For best results, be sure to carefully read all the instructions contained in the manual before using this appliance.

Nutri Ninja | Ninja Blender with Auto-iQ Technology Features:

• Patent Pending Ninja Blade Technology

• BPA Free Pitcher (maximum liquid capacity 2L), Nutri Ninja Cups, and Lids

• Drip-Free Pour Spout

• Total Crushing

• LED Control Panel with Timer

• Sturdy, Non-Slip Base

• Smart Lid technology for easy release

• 3 speeds: Low/Dough, Medium, & High

• 5 Auto-iQ set tings - Auto-iQ Frozen Drinks/Smoothies, Auto-iQ Food Puree, Nutri Ninja Auto-iQ Blend, Nutri Ninja Auto-iQ Ultra Blend and Auto-iQ Pulse

• Nutri Ninja Nutrient & Vitamin Extraction*

*Extract a drink containing vitamins and nutrients from fruits and vegetables.

Technology

www.ninjakitchen.eu

Before First Use

PLEASE KEEP THESE IMPORTANT SAFEGUARDS IN MIND WHEN USING THE APPLIANCE:

IMPORTANT: Make sure that the motor base is plugged in for use.

IMPORTANT: Never add ingredients into the container before placing the attachment in ﬁrst.

IMPORTANT: Attachments are not interchangeable.

IMPORTANT: DO NOT attempt to operate the appliance without the lid on.

IMPORTANT: Never run the appliance empty.

IMPORTANT: Appliance accessories are not intended to be used in the microwave as it may result in damage to the accessories.

WARNING: Stacked Blade Assembly is sharp and not locked in place. If using the pour spout, ensure the lid is fully locked onto the pitcher. Failure to do so will result in a risk of laceration.

WARNING: Stacked Blade Assembly is sharp and not locked in place. If pouring with the lid removed, carefully remove the Stacked Blade Assembly ﬁrst, holding it by the shaf t. Failure to do so will result in a risk of laceration.

CAUTION: Do not immerse the motor base into

water or any other liquid.

1 Remove all packaging material and labels from the

appliance.

2 Wash the lids, pitcher, Nutri Ninja cups and blade

assemblies in warm, soapy water. When washing the blade assemblies, use a dish-washing utensil with a handle to avoid direct hand contact with blades.

WARNING: Handle the Blade Assemblies with

care when washing, as the blades are sharp.

3 Handle blade assemblies with care to avoid contact

with sharp edges. Rinse and air dry thoroughly.

4 The pitcher, Nutri Ninja cups, lids, and blade assemblies

are all dishwasher safe. It is recommended that the lids and blade assemblies be placed on the top rack. Ensure the blade assemblies are removed from the containers before placing in the dishwasher.

5 Wipe the motor base clean with a damp cloth.

0800 862 0453

Separate/remove all parts from each other.

Assembly and Use for the Ninja® Blender

HIGH

PULSE

LOW

DOUGH

SMOOTHIE

SINGLE SERVE

PUREE

FROZEN BLENDING

WARNING: Handle the Stacked Blade Assembly with care, as the blades are sharp. WARNING: Remove utensils prior to processing. Failure to remove may cause the pitcher to be damaged or

to shatter, which may cause personal injury. WARNING: Never leave the appliance unattended while in use. CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the

user being burned.

IMPORTANT: Make sure that the motor base is plugged in for use.

ASSEMBLY

Fig. 1

LOW / DOUGH

MED

Fig. 2

Fig. 4a Fig. 4b

1 Review warning and caution statements above before

proceeding to number 2.

2 Place the motor base on a clean, dr y, level surface such

as a counter or table top.

3 Holding the Stacked Blade Assembly by the top of the

shaft, place it onto the drive gear inside the pitcher.

Ensure that the Stacked Blade Assembly is seated

properly and is standing upright. (Fig. 1)

NOTE: The Stacked Blade Assembly will ﬁt loosely on

the drive gear.

4 Place the motor base on a clean, dr y, level surface such

as a counter or table top.

5 Align and lower the Pitcher onto the motor base.

(Fig. 2) Handle should be aligned slightly to the right of

the “LOCK” symbol on the motor base.

6 Rotate the pitcher clockwise until it locks in place, you

will hear a click when the lock is engaged. (Fig. 3)

7 The pitcher can be placed on the motor base two ways;

the handle can be on the front right corner or the front

left corner. (Fig. 4a, Fig. 4b)

Fig. 3

Fig. 5b

Fig. 5a

8 Add the ingredients to the pitcher, making sure that

they do not exceed the highest measured marking line on the side of the pitcher.

NOTE: When blending any kind of liquids, such as

mixtures of any drinks or smoothies, do not exceed the “MA X LIQUID” mark (2 L) on the pitcher.

NOTE: If you need to add additional ingredients while

the appliance is processing, open the pour spout cap and pour the ingredients in through the opening.

9 Holding the lid by the handle in the upright position, place

it on top of the pitcher aligning the triangle ( ) located on the lid with the triangle ( ) located on the pitcher’s handle. (Fig. 5a) Press the handle down until you hear a click. The triangles on the lid and the blender handle MUST be aligned in order for the blender to turn on. (Fig. 5b)

10 Plug the power cord into the electrical outlet and press

the power button ( ).

IMPORTANT: As a safety feature, the power light

( ) will ﬂash and the motor will not work if the pitcher and lid are not installed correctly. When the pitcher and lid are installed properly, the power light ( ) will be solid, indicating that the appliance is ready for use.

www.ninjakitchen.eu

Assembly and Use for the Ninja® Blender - cont.

Fig. 6

USE REMOVAL

Fig. 8

NOTE: Nutri Ninja® | Ninja® Blender with

Auto-iQ® Technology can sense which jar is on the motor

base. The available function lights will illuminate depending

on which jar is placed on the motor base. (Fig. 6)

11 Review warning and caution statements at the top of page 8

before proceeding to number 12.

12 Press the power button to turn on the unit. Select

the speed or Auto-iQ program that best suits your

needs. The Auto-iQ program will stop the appliance

automatically at the end of the program. (Fig. 7)

NOTE: Pulse ingredients for even chopping by holding

the Auto-iQ Pulse button until your desired consistency

is reached.

NOTE: Max PULSE iteration is 30 Pulses. After 30

Pulses allow 10 minutes to pass before running the

PULSE function up to an additional 30 Pulses.

13 To pause the appliance, press the selected speed or

Auto-iQ program a second time. When the program is

paused, the light on the program button will ﬂash until

you press it again to resume the rest of the program.

14 When you have reached your desired consistency, stop

the appliance by pressing the power button ( ) and wait

for the Stacked Blade Assembly to stop turning. (Fig. 8)

0800 862 0453

Fig. 9Fig. 7

15 Turn the pitcher anticlockwise to remove and then lift

off the base. (Fig. 9)

CAUTION: Never insert your hands in the pitcher as the

blades are sharp. Always use a spatula to dislodge food that has stuck to the sides of the pitcher.

16 Open the pour spout cap and use the spout to empty

liquid contents.

17 For thicker consistencies, ﬁrst remove the lid by

pressing the release button and pulling the lid handle up to a 90 degree angle to lift lid off the pitcher. Then, carefully remove the Stacked Blade Assembly by the top of the shaft. Place Stacked Blade Assembly away from the work area to avoid accidental contact. Finally, empty contents from the pitcher. (Fig. 10)

18 Make sure that the unit is unplugged when not in use.

19 To release the motor base from the counter or table top,

place your hands underneath both sides of the motor base and gently pull the unit up and towards you. (Fi g. 11)

Fig. 10 Fi g . 11

Assembly and Use for the Nutri Ninja® Cups

WARNING: Handle the Pro Extractor Blades™ Assembly with care, as the blades are sharp. WARNING: Remove utensils prior to processing. Failure to remove may cause the Nutri Ninja cup to be

damaged or to shatter, which may cause personal injury. WARNING: Never leave the appliance unattended while in use. CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the

user being burned. CAUTION: Remove the Pro Extractor Blades Assembly from the Nutri Ninja cup upon completion of

blending. Do not store ingredients before or after blending them in the cup with the blade assembly

attached. Some foods may contain active ingredients or release gases that will expand if left in a sealed

container, resulting in excessive pressure buildup that can pose a risk of injury. For ingredient storage in

the cup, use only Sip & Seal Lid or Spout Lid to cover.

ASSEMBLY

Fig. 1

IMPORTANT: When processing soft dry

ingredients such as day-old bread or cheese

use quick, short 1 second pulses. Do not over ﬁll

to avoid overheating the appliance. Allow the

appliance to cool after each use.

NOTE: Nutri Ninja | Ninja

Blender Duo with Auto-iQ® Technology can sense which jar is on the motor base. The available function lights will illuminate depending on which jar is placed on the motor base. (Fig. 1)

1 Review warning and caution statements above

before proceeding to number 2.

2 Place the motor base on a clean, dr y, level surface such

as a counter or table top. Press down on the motor base to make sure that the suction cups adhere to the counter or table top.

Fig. 2

Fig. 3

3 Add ingredients to the Nutri Ninja cup.

4 Place the Pro Extractor Blades Assembly onto the cup

and tightly screw it on clockwise until you have a good seal. (Fig. 2)

5 Turn the Nutri Ninja cup upside down and place it onto

the motor base, aligning the tabs on the cup with the motor base. Rotate the Nutri Ninja cup clockwise until it locks in place, you will hear a click when the lock is engaged. (Fig. 3)

www.ninjakitchen.eu

Assembly and Use for the Nutri Ninja® Cups - cont.

USE REMOVAL

Fig. 4 Fig. 5 Fig. 6

6 Review warning and caution statements on page

14 before proceeding.

7 Press the power button on, and select the speed or

Auto-iQ program that suits your needs. (Fig. 4) The Auto-iQ program will stop the appliance automatically at the end of the program.

8 To pause the appliance, press the selected speed or

Auto-iQ program a second time. When the program is paused, the light on the program button will ﬂash until you press it again to resume the rest of the program.

9 Once you have reached your desired consistency, stop

the appliance by pressing the power button and wait for the Pro Extractor Blades Assembly to stop turning. Turn the Nutri Ninja

cup anticlockwise and pull straight up

to remove. (Fig. 5, Fig. 6)

NOTE: Do not overﬁll! To avoid spilling, do not add

ingredients past the “MAX” ﬁll line.

10 Turn the cup upright and remove the Pro Extractor

11 Do not store blended contents with the Pro Extractor

Blades attached attached.

12 Place the Sip & Seal lid or the spout lid onto the Nutri

Ninja cup, twist to seal and enjoy.

13 For storage, use Sip and Seal lid or spout lid to cover.

14 Be sure to store the Pro Extractor Blades attached to an

empty cup when not in use.

NOTE: Sip & Seal lid not intended for use with the XL

Multi-serve 1.4 L Ninja Jar.

15 Make sure that the motor base is unplugged when not

in use.

16 To release the motor base

from the counter or table top, place your hands underneath both sides of the motor base and gently pull the unit up and towards you.

Blades Assembly by twisting the Pro Extractor Blades Assembly anticlockwise. (Fig. 7)

Fig. 7

0800 862 0453

Programs, Speed Settings & Uses for the Pitcher

FUNCTION CONTAINER

Frozen Drinks /

Ice Crush

Pureeing Pitcher

Pitcher

BLADE

TYPE

Stacked Blade

Assembly

Stacked Blade

Assembly

SPEED or PROGRAM TYPE OF FOOD

Auto-iQ® Frozen Drinks/

Smoothies

Auto-iQ Food Puree

Programs, Speed Settings & Uses for the Nutri Ninja® Cup

FUNCTION CONTAINER

Nutri Ninja® Cup

Smoothies

Green Smoothies

Grating Nutri Ninja Cup

Chopping Nutri Ninja Cup

XL Multi-serve

1.4 L Ninja Jar

Stainless Steel

Ninja® Cup

Nutri Ninja Cup

XL Multi-serve

1.4 L Ninja Jar

Stainless Steel

Ninja Cup

BLADE

TYPE

Pro Extractor

Blades™

Assembly

Pro Extractor

™

Blades

Assembly

Pro Extractor

™

Blades

Assembly

Pro Extractor

™

Blades

Assembly

SPEED or PROGRAM TYPE OF FOOD

Nutri Ninja Auto-iQ Blend

Nutri Ninja Auto-iQ Ultra

Blend

Auto-iQ Pulse

Nutri Ninja Auto-iQ Blend

High

Auto-iQ Pulse

Nutri Ninja Auto-iQ Blend

High

Ice

Frozen Drinks

Smoothies

Soups*

Milkshakes

Smoothies

Frappes

Milkshakes

Protein Drinks

Frozen Fruits

Frozen Vegetables

Kale

Celery

Spinach

Seeds

Ice

Grated Cheese Bread Crumbs

Salsa

Vegetables

Nuts

IM POR TA N T: Do not run the appliance over 4 minutes at a time to prevent overheating of the appliance. * When blending sauces and soups, make sure they’re cooled to room temperature ﬁrst - Ninja® containers are not intended for

hot blending.

www.ninjakitchen.eu

Care & Maintenance

HOW TO CLEAN

CAUTION: Make sure that the motor base is

unplugged from the power source before inserting or removing any attachment and before cleaning.

CAUTION: DO NOT immerse the motor base into

water or any other liquid.

1 Separate/remove all parts from each other.

2 Hand Washing:

assemblies and attachments in warm, soapy water When washing the blade assemblies, use a dish-washing utensil with a handle to avoid direct hand contact with blades. Handle blade assemblies with care to avoid contact with sharp edges. Rinse and air dry thoroughly.

Dishwasher: The containers, lids, blade assemblies and at tachments are all dishwasher safe. The lids and Blade Assemblies are top rack dishwasher safe. Ensure that the Blade Assemblies are removed from the containers before placing in the dishwasher.

WARNING: Handle the Blade Assemblies with

care when washing, as the blades are sharp. Contact with the blades’ edges can result in laceration.

3 Wipe the motor base clean with a damp cloth

Please call customer service if any servicing needs to

be performed on the appliance at 0800 862 0453.

Wash the containers, lids, blade

HOW TO STORE

Store the Nutri Ninja® | Ninja® Blender Duo™ with AUTO-iQ™ Technology upright with the blade assembly inside the corresponding container with the lid secured on top. Do not place anything on top. Store the rest of the attachments in a safe place where they will not be damaged and won’t cause harm. Loosely wrap the power cord around the motor base

NOTE:

Do not store blended or unblended ingredients in

the Nutri Ninja cup with the blade assembly attached.

RESETTING THE MOTOR THERMOSTAT

Store the N Technology features a unique safety system which prevents damage to the unit’s motor and drive system should you inadvertently overload your appliance. If

the appliance is being overloaded, the motor will stop. Allow the appliance to cool for approximately 15 minutes. To reset the appliance,

follow the resetting procedure below:

Unplug the appliance from the electrical outlet.

Remove and empty the container and ensure that no

food is jamming the blade assembly.

Allow the appliance to cool for approximately 15

minutes.

Re-install the container onto the base and re-plug the

appliance into the electrical outlet.

Proceed to use the appliance as before making sure not to exceed the recommended maximum capacities.

utri Ninja® | Ninja® Blender with Auto-iQ®

0800 862 0453

Troubleshooting Guide

PROBLEMS POSSIBLE REASONS & SOLUTIONS

Motor Doesn’t Start or Blade Assembly Doesn’t Rotate.

Make sure the container is securely locked into the motor base.

Make sure the lid is securely on container in the correct position (align arrows).

The appliance is turned “Off”. Press the power button (

Check that the plug is securely inserted into the electrical outlet.

Check the fuse or circuit breaker.

The unit has overloaded. The appliance will stop and the power light will ﬂash. Unplug and wait approximately 15 minutes before using again.

The unit has overheated. Unplug and wait approximately 15 minutes before using again.

Check to make sure the unit is not overloaded.

) to turn “On”.

Food is Unevenly Chopped.

Food is Chopped Too Fine or is Too Watery.

Food Collects On Lid or On the Sides of the Container.

You Cannot Achieve Snow From Solid Ice.

Motor Base Won’t Stick to Counter or Table Top.

You get an “Err” Message.

You have a blinking red light.

Either you are chopping too much food at one time, or the pieces are not of even size and processing smaller amounts per batch.

The food has been over processed. Use Auto-iQ® Pulse button for controlled processing.

The mixture is too thick. Add more liquid.

Do not use ice that has been sit ting out or has started to melt. Use ice straight from the freezer.

Start with a few pulses and then go to a continuous blending cycle.

Make sure surface and suction feet are wiped clean. Suction feet will only stick to smooth surfaces. Suction feet WILL NOT stick on some surfaces such as, wood, tile and non-polished ﬁnishes.

DO NOT attempt to use appliance when the motor base is stuck to a surface that is not secure, (cut ting board, platter, plates, etc.).

Your Ninja® is able to detect which jar is on the base. You may be trying to use a program that is not designed for the jar you have installed. The programs will light up indicating which programs are available for each jar.

The unit is not installed properly. For your safety the unit will only be able to be turned on when it is properly assembled. Please refer to the assembly pages of this inspiration guide for assistance.

www.ninjakitchen.eu

Euro-Pro Europe Limited 15 Mariner Court Calder Park Wakeﬁeld WF4 3FL United Kingdom

Freephone 0800 862 0453

www.ninjakitchen.eu

Auto-iQ, Nutri-Ninja, Ninja, Sip & Seal and Total Crushing are registered trademarks of Euro-Pro Europe Limited.

Pro Extractor Blades is a trademark of Euro-Pro Europe Limited.

Printed in China

Illustrations may differ from actual product. We are constantly striving to improve our products, therefore the speciﬁcations contained herein are subject to change without notice.

BL642UK_30_IB_160531_1

Ninja BL642UK Instruction manual

Specifications and Main Features

Frequently Asked Questions

User Manual