Ninja BL642REF Owner's Manual

Download

Page 1

BL642REF

OWNER’S GUIDE

www.ninjakitchen.com

1 877 646-5288

Page 2

1-877-646-5288

IMPORTANT SAFETY INSTRUCTIONS

For Household Use Only

WHEN USING ELECTRICAL APPLIANCES, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED, INCLUDING THE FOLLOWING:

READ ALL INSTRUCTIONS BEFORE USING YOUR NUTRI NINJA

| NINJA® BLENDER DUO™ WITH AUTO-IQ™ TECHNOLOGY.

POLARIZED PLUG

WARNING: To reduce the risk of

electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will ﬁt into a polarized outlet only one way. If the plug does not ﬁt fully into the outlet, reverse the plug. If it still does not ﬁt, contact a qualiﬁed electrician to install the proper outlet. DO NOT modify the plug in

any way.

WARNING: Extension cords are

not recommended for use with this product.

WARNING:

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:

1 WARNING: Remove utensils prior to

processing. Failure to remove may cause the jar to be damaged or to shatter which may cause personal injury.

2 WARNING: Stacked Blade Assembly

is sharp, not locked in place and removable, handle with care. When handling the Stacked Blade Assembly, always hold by the shaft. Failure to do so will result in a risk of laceration.

3 WARNING: Stacked Blade Assembly

is sharp and not locked in place. If using the pour spout, ensure the lid is fully locked onto the pitcher. If pouring with the lid removed, carefully remove the Stacked Blade Assembly ﬁrst, holding it by the shaft. Failure to do so will result in a risk of laceration.

5 CAUTION: Do not blend hot liquids,

doing so may cause excessive pressure build-up, resulting in risk of the user being burned.

6 CAUTION: We do not recommend

grinding in any of our Nutri Ninja

cups.

7 CAUTION: Remove the Pro Extractor

Blades® Assembly from the cup upon completion of blending. Some ingredients have the potential to expand after blending resulting in excessive pressure buildup that can pose a risk of injury.

8 To protect against electrical shock, do not

submerge the appliance or allow the power cord to come into contact with water or any other liquid.

Page 3

www.ninjakitchen.com

9 DO NOT allow the appliance to be used by

children. Close attention is necessary when used near children. This is not a toy.

10 Never leave an appliance unattended when

inuse.

11 Appliance accessories are not intended to

be used in the microwave as it may result in damage to the accessories.

12 Turn the appliance Off and remove the power

cord from the electrical outlet when not in use, before assembling or disassembling parts and before cleaning. To unplug, grasp the plug and pull from the electrical outlet. Never pull from the power cord.

13 DO NOT abuse the power cord. Never carry

the appliance by the power cord or yank it to disconnect from electrical outlet; instead grasp the plug and pull to disconnect.

14 DO NOT operate any appliance with a

damaged cord or plug, or after the appliance malfunctions, has been dropped or damaged in any manner. This appliance has no serviceable parts. Return the appliance to SharkNinja Operating LLC for examination, repair or adjustment.

15 DO NOT let the power cord hang over

the edge of table or counter or touch hot surfaces such as the stove.

16 Always use appliance on a dry, level surface. 17 Keep hands, hair, clothing, as well as utensils

out of container while processing to reduce the risk of severe injury to persons or damage to the appliance. A scraper may be used but only when the appliance is not running.

18 Avoid contact with moving parts. 19 DO NOT attempt to sharpen blades. 20 DO NOT use the appliance if blade

assemblies are bent or damaged.

21 To reduce risk of injury, never place the blade

assemblies on the base without the pitcher or Nutri Ninja® cup properly attached.

22 DO NOT operate this appliance on or near

any hot surfaces (such as gas or electric burner or in a heated oven).

23 The use of attachments or accessories

including canning jars, not recommended by the manufacturer may result in ﬁre, electric shock or personal injury.

24 DO NOT remove the container from the motor

base while the appliance is in operation.

25 To reduce the risk of injury, NEVER operate

the appliance without the lid in place; DO NOT try to defeat the interlock mechanism; make sure that the attachment is properly installed before operating the appliance.

26 DO NOT expose containers to extreme

temperature changes.

27 DO NOT overﬁll. 28 DO NOT operate the appliance empty. 29 If the appliance overheats, a thermal switch

will become activated and shut off the motor. To reset, unplug the appliance and let it cool down for approximately 15 minutes before using again.

30 THIS PRODUCT IS INTENDED FOR

HOUSEHOLD USE ONLY. Do not use

this appliance for anything other than its intended use. Do not use outdoors.

31 The maximum rating is based on the

Stacked Blade Assembly (pitcher) that drives the greatest power and other recommended attachments may draw signiﬁcantly less power or current.

SAVE THESE

INSTRUCTIONS

Page 4

1-877-646-5288

THIS BOOK COVERS MODEL NUMBERS:

BL642REF

TECHNICAL SPECIFICATIONS

Voltage: 120V~, 60Hz. Power: 1500 Watts Pitcher Capacity: 72 ounces (9 cups, 2.1 L) Max Liquid Capacity: 64 ounces (8 cups, 1.9 L) Nutri Ninja

Cup Capacity: 18 ounces (2.25 cups, 530 mL) 24 ounces (3 cups, 710 mL) 32 ounces (4 cups, 950 mL)

Page 5

www.ninjakitchen.com

Contents

Thank you for purchasing the NutriNinja®| Ninja® Blender Duo™ with AUTO-iQ™ Technology.

Getting to Know Your Nutri Ninja® | Ninja® Blender Duo™ with AUTO-iQ™ Technology .......10

Using the Nutri Ninja® | Ninja® Blender Duo™ with AUTO-iQ™ Technology . ......................12

Assembly and Use for the Ninja® Blender ......................................................................13

Assembly and Use for the Nutri Ninja® Cups .................................................................. 15

Programs, Speed Settings & Uses for the Blender ..........................................................16

Programs, Speed Settings & Uses for the Nutri Ninja® Cup .............................................16

Care & Maintenance ....................................................................................................17

Troubleshooting Guide .................................................................................................. 18

Replacement Parts ....................................................................................................... 18

Warranty & Registration ................................................................................................ 19

Page 6

1-877-646-5288

Getting To Know Your Nutri Ninja® | Ninja® Blender Duo™ with AUTO-iQ™ Technology

f Blender Pitcher g Blender Lid h Stacked Blade Assembly

a Jumbo Multi-Serve 32 oz. Nutri

Ninja® Cup

b Regular 24 oz. Nutri Ninja® Cup c Small 18 oz. Nutri Ninja® Cup d Pro Extractor Blades™ Assembly e Sip & Seal® Lids (x3)

i Motor Base

NOTE: Blade assemblies are not

interchangeable.

Page 7

www.ninjakitchen.com

Nutri Ninja® | Ninja® Blender Duo™ with AUTO-iQ™ Technology Features:

• Ninja® Blade Technology

• BPA Free Blender Pitcher, Nutri Ninja

Cups and Lids

• Drip-Free Pour Spout

• LED Control Panel with Timer

• Sturdy, Non-Slip Base

• Smart Lid technology for easy release

• 3 speeds: Low, Medium, & High

• 5 AUTO-iQ

™

Programs - AUTO-iQ™ Frozen Drinks/Smoothies, AUTO-iQ™ Puree, Nutri Ninja® AUTO-iQ™ Blend,

Nutri Ninja® AUTO-iQ™Ultra Blend and AUTO-iQ™ Pulse

• Nutri Ninja

Nutrient & Vitamin Extraction*

* Extract a Drink Containing Vitamins & Nutrients From Fruits & Veggies

The Nutri Ninja

| Ninja® Blender Duo™ with AUTO-iQ™ Technology is a professional, high powered innovative tool with a sleek design and outstanding performance, a true asset to any kitchen. The Nutri Ninja® | Ninja® Blender Duo™ with AUTO-iQ™ Technology features intelligent programs that combine unique pulsing, blending and pausing patterns that do the work for you! Get great results every time with no guesswork required! For best results, be sure to carefully read all the instructions contained in the manual before using this appliance.

Page 8

1-877-646-5288

Using the Nutri Ninja® | Ninja® Blender Duo™ with AUTO-iQ™ Technology

CAUTION: Do not immerse the motor base

into water or any other liquid.

1 Remove all packaging material and labels from the

appliance. Separate/remove all parts from each other.

2 Wash the lids, blender pitcher, Nutri Ninja

cups and Blade Assemblies in warm, soapy water. When washing the blade assemblies, use a dish-washing utensil with a handle to avoid direct hand contact with blades.

WARNING: Handle the Stacked Blade Assembly,

and Pro Extractor Blades® Assembly with care when washing, as the blades are sharp.

3 Rinse and air dry thoroughly.

4 The blender pitcher, Nutri Ninja

cups, lids, Stacked Blade Assembly, and Pro Extractor Blades® Assembly are all dishwasher safe. It is recommended that the lids and Blade Assemblies be placed on the top rack. Ensure that the Blade Assemblies are removed from the containers before placing in the dishwasher.

5 Wipe the motor base clean with a damp cloth.

WARNING: Stacked Blade Assembly is sharp and not locked in place. If using the pour spout, ensure the lid is fully locked onto the blender pitcher. Failure to do so will result in a risk of laceration.

WARNING: Stacked Blade Assembly is sharp and not locked in place. If pouring with the lid removed, carefully remove the Stacked Blade Assembly ﬁrst, holding it by the shaft. Failure to do so will result in a risk of laceration.

PLEASE KEEP THESE IMPORTANT SAFEGUARDS IN MIND WHEN USING THE APPLIANCE:

IMPORTANT: Make sure that the motor base is plugged in for use.

IMPORTANT: Never add ingredients into the container before placing the attachment in ﬁrst.

IMPORTANT: Attachments are not interchangeable.

IMPORTANT: DO NOT attempt to operate the appliance without the lid on.

IMPORTANT: Never run the appliance empty.

IMPORTANT: Appliance accessories are not intended to be used in the microwave as it may result in damage to the accessories.

Page 9

www.ninjakitchen.com

Assembly and Use for the Blender

1 Review warning and caution statements above before

proceeding to number 2.

2 Place the motor base on a clean, dry, level surface such

as a counter or table top.

3 Align and lower the Pitcher onto the motor base.

(Fig. 1) Handle should be aligned slightly to the right of the “LOCK” symbol on the motor base.

4 Rotate the Pitcher clockwise until it locks in place, you

will hear a click when the lock is engaged. (Fig. 2)

5 The Pitcher can be placed on the motor base two ways;

the handle can be on the front right corner or the front left corner. (Fig. 3a, Fig. 3b)

6 Holding the Stacked Blade Assembly by the top of the

shaft, place it onto the drive gear inside the Pitcher. Ensure that the Stacked Blade Assembly is seated properly and is standing upright. (Fig. 4)

NOTE: The Stacked Blade Assembly will ﬁt loosely on

the drive gear.

7 Add the ingredients to the Pitcher, making sure that

they do not exceed the highest measured marking line on the side of the Pitcher.

NOTE: When blending any kind of liquids, such as

mixtures of any drinks or smoothies, do not exceed the “MAX” liquid mark (1.9 L) on the Pitcher.

NOTE: If you need to add additional ingredients while

the appliance is processing, open the pour spout cap and pour the ingredients in through the opening.

8 Holding the lid by the handle in the upright position,

place it on top of the Pitcher aligning the triangle ( ) located on the lid with the triangle ( ) located on the Pitcher’s handle. (Fig. 5a) Press the handle down until you hear a click. The triangles on the lid and the blender handle MUST be aligned in order for the blender to turn on. (Fig. 5b)

NOTE: As a safety feature, the power light

( ) will ﬂash and the motor will not work if the Pitcher and lid are not installed correctly. When the Pitcher and lid are installed properly, the power light ( ) will be solid, indicating that the appliance is ready for use.

9 Plug the power cord into the electrical outlet and press

the power button ( ).

ASSEMBLY

ON / OFF MARCHE /ARRÊT

FROZEN DRINKS

SMOOTHIES

BOISSONS CONGELÉES

PURÉE

MEDIUM

MOYEN

HIGH ÉLEVÉ

PULSE

IMPULSION

ULTRA BLEND ULTRA MÉLANGE

BLEND

MÉLANGE

LOW BAS

Fig. 1

ON / OFF MARCHE /ARRÊT

FROZEN DRINKS

SMOOTHIES

BOISSONS CONGELÉES

PURÉE

MEDIUM

MOYEN

HIGH ÉLEVÉ

PULSE

IMPULSION

ULTRA BLEND ULTRA MÉLANGE

BLEND MÉLANGE

LOW BAS

ON / OFF MARCHE /ARRÊT

FROZEN DRINKS

SMOOTHIES

BOISSONS CONGELÉES

PURÉE

MEDIUM

MOYEN

HIGH ÉLEVÉ

PULSE IMPULSION

ULTRA BLEND

ULTRA MÉLANGE

BLEND

MÉLANGE

LOW BAS

ON / OFF MARCHE /ARRÊT

FROZEN DRINKS

SMOOTHIES

BOISSONS CONGELÉES

PURÉE

MEDIUM MOYEN

HIGH ÉLEVÉ

PULSE IMPULSION

ULTRA BLEND ULTRA MÉLANGE

BLEND

MÉLANGE

LOW BAS

Fig. 3aFig. 2

Fig. 4

Fig. 5a

HIGH

PULSE

LOW

DOUGH

SMOOTHIE

SINGLE SERVE

PUREE

FROZEN BLENDING

1500

WATTS

AUTO

AUT

AUT O

AUT

ON / OFF MARCH

/ARR

ÊT

FROZEN DRINKS

SMOOTHIES

BOISSO

NS CON

GELÉES

FOOD PURÉE

PURÉE

D’ AL

I ME

NTS

MEDIUM MOYEN

HIGH ÉLEVÉ

PULSE

IMPULSION

ULTRA BLEND

ULTRA MÉLANGE

BLEND M

ÉLANGE

LOW / DOUGH

BAS / PÂ

ON / OFF MARCHE /ARRÊT

FROZEN DRINKS

SMOOTHIES

BOISSONS CONGELÉES

PURÉE

MEDIUM MOYEN

HIGH ÉLEVÉ

PULSE

IMPULSION

ULTRA BLEND

ULTRA MÉLANGE

BLEND MÉLANGE

LOW BAS

Fig. 3b

Fig. 5b

WARNING: Handle the Stacked Blade Assembly with care, as the blades are sharp. WARNING: Remove utensils prior to processing. Failure to remove may cause the pitcher to be damaged or

to shatter, which may cause personal injury. WARNING: Never leave the appliance unattended while in use. CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the

user being burned.

IMPORTANT: Make sure that the motor base is plugged in for use.

Page 10

1-877-646-5288

NOTE: Nutri Ninja® | Ninja® Blender Duo™ with

AUTO-iQ™ Technology can sense which jar is on the

motor base. The function lights will illuminate depending

on which jar is placed on the motor base. (Fig. 6)

10 Press the power button to turn on the unit. Select

the speed or AUTO-iQ™ Program that best suits your

needs. The AUTO-iQ™ program will stop the appliance

automatically at the end of the program. (Fig. 7)

11 To pause the appliance, press the selected speed or

AUTO-iQ™ Program a second time.

12 When you have reached your desired consistency, stop

the appliance by pressing the power button ( ) and

wait for the Stacked Blade Assembly to stop turning.

(Fig. 8)

13 Turn the Pitcher counter clockwise to remove and then

lift off the base. (Fig. 9)

Fig. 8

USE

REMOVAL

Fig. 6

Fig. 9

Assembly and Use for the Blender - cont.

AUTO

Fig. 7

CAUTION: Never insert your hands in the Pitcher

as the Stacked Blade Assembly is sharp. Always use a spatula to dislodge food that has stuck to the sides of the Pitcher.

14 Open the pour spout cap and use the spout to empty

liquid contents.

15 For thicker consistencies, ﬁrst remove the lid by

pressing the release button and pulling the lid handle up to a 90 degree angle to lift lid off the pitcher. Then, carefully remove the Stacked Blade Assembly by the top of the shaft. Place Stacked Blade Assembly away from the work area to avoid accidental contact. Finally, empty contents from the pitcher. (Fig. 10)

16 Make sure that the unit is unplugged when not in use.

17 To release the motor base from the counter or table top,

place your hands underneath both sides of the motor base and gently pull the unit up and towards you. ( Fig. 11)

WARNING: Handle the Stacked Blade Assembly with care, as the blades are sharp. WARNING: Remove utensils prior to processing. Failure to remove may cause the pitcher to be damaged or

user being burned.

IMPORTANT: Make sure that the motor base is plugged in for use.

Fig. 10

Fig. 11

Page 11

www.ninjakitchen.com

WARNING: Handle the Pro Extractor Blades® Assembly with care, as the blades are sharp. WARNING: Remove utensils prior to processing. Failure to remove may cause the Nutri Ninja cup to be

damaged or to shatter, which may cause personal injury. WARNING: Never leave the appliance unattended while in use. CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the

user being burned.

CAUTION: Remove the Pro Extractor Blades® Assembly from the cup upon completion of blending. Some

ingredients have the potential to expand after blending resulting in excessive pressure buildup that can

pose a risk of injury.

Fig. 2 Fig. 3

Assembly and Use for the Nutri Ninja® Cups

Fig. 4 Fig. 5 Fig. 6

ASSEMBLY USE REMOVAL

Fig. 1

7 To pause the appliance, press the selected speed or

Auto-iQ™ Program a second time.

8 Once you have reached your desired consistency,

turn the power button off. Turn the Nutri Ninja® cup counter-clockwise and pull straight up to remove.

(Fig. 5, Fig. 6)

NOTE: Do not overﬁll! To avoid spilling, do not add

ingredients past the “Max Liquid” line.

9 Turn the cup upright and remove the Pro Extractor Blades®

Assembly by twisting the blade assembly counterclockwise.

10 Place the Sip & Seal® lid onto the Nutri Ninja® cup,

twist to seal and enjoy!

11 Make sure that the motor base is unplugged when not

in use.

12 To release the motor base

from the counter or table top, place your hands underneath both sides of the motor base and gently pull the unit up and towards you. (Fig. 7)

NOTE: Nutri Ninja® | Ninja® Blender Duo™ with AUTO-iQ™ Technology can sense which jar is on the motor base. The function lights will illuminate depending on which jar is placed on the motor base. (Fig. 1)

1 Review warning and caution statements above before

proceeding to number 2.

2 Place the motor base on a clean, dry, level surface such

as a counter or table top. Press down on the motor

base to make sure that the suction cups adhere to the

counter or table top.

3 Add ingredients to the Nutri Ninja® cup. 4 Place the Pro Extractor Blades® Assembly onto the cup

and tightly screw it on clockwise until you have a good

seal. (Fig. 2)

5 Turn the Nutri Ninja® cup upside down and place it onto

the motor base, aligning the tabs on the cup with the motor

base. Rotate the Nutri Ninja® cup clockwise until it locks in

place, you will hear a click when the lock is engaged. (Fig. 3)

6 Press the power button on, and select the speed or

Auto-iQ™ program that suits your needs. The Auto-iQ™

program will stop the appliance automatically at the end

of the program. (Fig. 4)

Fig. 7

Page 12

1-877-646-5288

Programs, Speed Settings & Uses for the Blender

FUNCTION CONTAINER

BLADE

TYPE

SPEED or

PROGRAM

TYPE OF FOOD

Processing Blender Pitcher

Stacked Blade

Assembly

AUTO-iQ™ Puree

Medium

Dips

Batters

Chopping Blender Pitcher

Stacked Blade

Assembly

AUTO-iQ

™

Pulse

Salsa

Vegetables

Nuts

Frozen Drinks /

Ice Crush

Blender Pitcher

Stacked Blade

Assembly

AUTO-iQ

™

Frozen Drinks/

Smoothies

Ice

Frozen Drinks

Pureeing Blender Pitcher

Stacked Blade

Assembly

AUTO-iQ

™

Puree

Smoothies

Soups*

Milkshakes

Programs, Speed Settings & Uses for the Nutri Ninja® Cup

FUNCTION CONTAINER

BLADE

TYPE

SPEED or

PROGRAM

TYPE OF FOOD

Smoothies Nutri Ninja® Cup

Pro Extractor

Blades™

Assembly

Nutri Ninja® AUTO-iQ™

Blend

Smoothies

Frappes

Milkshakes

Protein Drinks

Green Smoothies Nutri Ninja

Cup

Pro Extractor

Blades™

Assembly

Nutri Ninja® AUTO-iQ™

Ultra Blend

Frozen Fruits

Frozen Vegetables

Kale

Celery

Spinach

Seeds

Ice

Grating Nutri Ninja

Cup

Pro Extractor

Blades™

Assembly

AUTO-iQ™ Pulse

High

Grated Cheese Bread Crumbs

Spices

Chopping Nutri Ninja

Cup

Pro Extractor

Blades™

Assembly

AUTO-iQ™ Pulse

High

Salsa

Vegetables

Nuts

* When blending blending soups, make sure they’re cooled to room temperature ﬁrst - Ninja® containers are not intended for hot

blending.

Page 13

www.ninjakitchen.com

Care & Maintenance

HOW TO STORE

1 Store the Nutri Ninja® | Ninja® Blender Duo™ with AUTO-

iQ™ Technology upright with the pitcher on the motor base, Stacked Blade Assembly inside the pitcher and lid locked on the pitcher. Do not place anything on top. Store the Nutri Ninja® cup with the Pro Extractor Blades® Assembly attached to the cup and all other attachments along side the appliance or in a cabinet where they will not be damaged and won’t cause a hazard.

RESETTING THE MOTOR THERMOSTAT

Store the

Nutri Ninja® | Ninja® Blender Duo™ with AUTO-iQ™ Technology features a unique safety system which prevents damage to the unit’s motor and drive system should you inadvertently overload your appliance. If the appliance is being overloaded,

the motor will stop. Allow the appliance to cool for approximately 15 minutes. To reset the

appliance, follow the resetting procedure below:

Unplug the appliance from the electrical outlet.

Remove and empty the container and ensure that no

food is jamming the blade assembly.

Allow the appliance to cool for approximately 15

minutes.

Re-install the container onto the base and re-plug the

appliance into the electrical outlet.

Proceed to use the appliance as before making sure not to exceed the recommended maximum capacities.

HOW TO CLEAN

CAUTION: Make sure that the motor base is

unplugged from the power source before inserting or removing any attachment and before cleaning.

CAUTION: DO NOT immerse the motor base into

water or any other liquid.

1 Separate/remove all parts from each other.

2 Hand Washing: Wash the lids, pitcher, Nutri Ninja

™

cups and blade assemblies in warm, soapy water. When washing the blade assemblies, use a dish-washing utensil with a handle to avoid direct hand contact with blades. Handle blade assemblies with care to avoid contact with sharp edges. Rinse and air dry thoroughly.

WARNING: Handle the Stacked Blade Assembly,

and Pro Extractor Blades® Assembly with care when washing, as the blades are sharp. Contact with the blades’ edges can result in laceration.

3 Dishwasher: The pitcher, Nutri Ninja cups, lids, Stacked

Blade Assembly, and Pro Extractor Blades

Assembly are all dishwasher safe. It is recommended that the lids and blade assemblies be placed on the top rack. Ensure the blade assembly is removed from the cup, or pitcher before placing in the dishwasher.

4 Wipe the motor base clean with a damp cloth

Please call customer service if any servicing needs to

be performed on the appliance at 1-877-646-5288.

Page 14

1-877-646-5288

Troubleshooting Guide

Replacement Parts

ORDERING REPLACEMENT PARTS

To order additional parts and attachments, please visit our website: www.ninjakitchen.com or feel free to contact customer service: 1-877-646-5288.

PROBLEMS POSSIBLE REASONS & SOLUTIONS

Motor Doesn’t Start or Blade Assembly Doesn’t Rotate.

Make sure the container is securely placed on motor base.

Make sure the lid is securely on container in the correct position (align arrows).

The appliance is turned “Off”. Press the power button (

) to turn “On”.

Check that the plug is securely inserted into the electrical outlet.

Check the fuse or circuit breaker.

The unit has overloaded. The appliance will stop and the power light will ﬂash. Unplug and wait approximately 15 minutes before using again.

The unit has overheated. Unplug and wait approximately 15 minutes before using again.

Check to make sure the unit is not overloaded.

Food is Unevenly Chopped.

Either you are chopping too much food at one time, or the pieces are not of even size and processing smaller amounts per batch.

Food is Chopped Too Fine or is Too Watery.

The food has been over processed. Use AUTO-iQ™ Pulse button for controlled processing.

Food Collects On Lid or On the Sides of the Container.

The mixture is too thick. Add more liquid.

You Cannot Achieve Snow From Solid Ice.

Do not use ice that has been sitting out or has started to melt. Use ice straight from the freezer.

Start with a few pulses and then go to a continuous blending cycle.

Motor Base Won’t Stick to Counter or Table Top.

Make sure surface and suction feet are wiped clean. Suction feet will only stick to smooth surfaces. Suction feet WILL NOT stick on some surfaces such as, wood, tile and non-polished ﬁnishes.

DO NOT attempt to use appliance when the motor base is stuck to a surface that is not secure, (cutting board, platter, plates, etc.).

You get an “Err” Message

Your Ninja is able to detect which jar is on the base. You may be trying to use a program that is not designed for the jar you have installed. The programs will light up indicating which programs are available for each jar.

You have a blinking red light

The unit is not installed properly. For your safety the unit will only be able to be turned on when it is properly assembled. Please refer to the assembly pages of this inspiration guide for assistance.

Page 15

www.ninjakitchen.com

Product Registration

Please visit www.ninjakitchen.com or call 1-877-646-5288 to register your new Ninja™ product within ten (10) days of purchase. You will be asked to provide the store name, date of purchase and model number along with your name and address.

The registration will enable us to contact you in the unlikely event of a product safety notiﬁcation. By registering you acknowledge to have read and understood the instructions for use, and warnings set forth in the accompanying instructions.

NINETY (90) DAY REFURBISHED PRODUCT LIMITED

WARRANTY

SharkNinja Operating LLC warrants this product to be free from material defects and workmanship for a period of ninety

(90) days from the date of purchase when utilized for normal household use, subject to the following conditions, exclusions and exceptions.

The liability of SharkNinja Operating LLC is limited solely, at our option, to either: 1) the cost of the repair or replacement of the unit with a refurbished unit; or 2) an upgrade to a similar model refurbished unit of equal or greater value. Replacement units/parts will be warranted for the remaining portion of the original (90) ninety day warranty period

This Limited Warranty does not cover normal wear of parts and does not apply to any unit that has been tampered with or used for commercial purposes. This Limited Warranty does not cover damage caused by accident, misuse, abuse, negligent handling, incorrect voltage, vandalism, unsuitable environments, damage due to faulty packaging or mishandling in transit, natural disasters or other damages beyond SharkNinja Operating LLC’s control. This Limited Warranty does not cover damage or defects caused by or resulting from damages from shipping or repairs, service or alteration to the product or any of its parts, which have been performed by a repair person not authorized by SharkNinja Operating LLC. Since this unit has been represented and sold as a refurbished item, this Limited Warranty does not apply to cosmetic damages or defects, including, but not limited to, scratches, scuffs, dents, or dings. Operating the unit in violation of the instructions in the owner’s manual will void the warranty terms.

If your appliance fails to operate properly while in use under normal household conditions within the Limited Warranty period, you may return the complete appliance and accessories with proof of purchase and date, freight prepaid. For Customer Service support and product specialists, call 1-877-646-5288 or visit our website ninjakitchen.com.

If the appliance is found by SharkNinja Operating LLC to be defective, in SharkNinja Operating LLC’s sole discretion, we will repair or replace it as set out in the second paragraph above free of charge. Proof of purchase date and a check made payable to SharkNinja Operating LLC in the amount of $19.95 to cover the cost of return shipping and handling must be included.*

This Limited Warranty is extended to the original purchaser of this refurbished unit and excludes all other legal, implied and/or conventional warranties. The responsibility of SharkNinja Operating LLC if any, is limited to the speciﬁc obligations expressly assumed by it under the terms of this Limited Warranty. In no event is SharkNinja Operating LLC liable for incidental or consequential damages to anyone of any nature whatsoever. Some states do not permit the exclusion or limitation of incidental or consequential damages, so the above may not apply to you.

This Limited Warranty gives you speciﬁc legal rights, and you may also have other rights which vary from state to state or from province to province.

*IMPORTANT: Carefully pack item to avoid damage in shipping. Be sure to include proof of purchase date and to attach tag to item before packing with your name, complete address and phone number with a note giving purchase information, model number and what you believe is the problem with the item. We recommend you insure the package (as damage in shipping is not covered by your Limited Warranty). Mark the outside of your package “ATTENTION CUSTOMER SERVICE”.

Page 16

SharkNinja Operating LLC

US: Newton, MA 02459 CAN: Ville St-Laurent, QC H4S 1A7 1-877-646-5288

www.ninjakitchen.com

Ninja, Nutri Ninja and Sip & Seal are registered trademarks of SharkNinja Operating LLC. Auto-iQ, Blender Duo and Pro Extractor Blades are trademarks of SharkNinja Operating LLC.

Illustrations may differ from actual product. We are constantly striving to improve our products, therefore the specifications contained herein are subject to change without notice.

For SharkNinja U.S. Patent information visit www.sharkninja.com/USPatents.

Printed in China

BL642REF_IB_151207_1