Ninja BL642ME, BL642UK Owner's Manual

Download

Page 1

BL642ME

OWNER’S GUIDE

™

www.ninjakitchenme.com

Page 2

IMPORTANT SAFETY INSTRUCTIONS

For Household Use Only

WHEN USING ELECTRICAL APPLIANCES, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED, INCLUDING THE FOLLOWING:

READ ALL INSTRUCTIONS BEFORE USING YOUR NUTRI NINJA™ | NINJA™ BLENDER DUO WITH AUTO-IQ™ TECHNOLOGY.

WARNING: Extension cords are not

recommended for use with this product.

WARNING: The blades are not

afﬁxed to the unit. They are removable and very sharp. Handle with care!

CAUTION: ln order to avoid a

hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.

IMPORTANT: This appliance is not

intended for use by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Children shall not use or play with this appliance. Close supervision is necessary to keep appliance and cord out of reach of children during use.

WARNING:

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:

WARNING: Remove utensils prior to processing. Failure to remove may cause the jar to be damaged or to shatter which may cause personal injury.

WARNING: The blade assemblies are

sharp

, not locked in place and removable,

handle with care. When handling the blade

assemblies, always hold by the shaft. Failure to do so will result in a risk of laceration

3 WARNING: Stacked Blade Assembly is

sharp and not locked in place. If using the pour spout, ensure the lid is fully locked onto the pitcher. If pouring with the lid removed, carefully remove the Stacked Blade Assembly ﬁrst, holding it by the shaft. Failure to do so will result in a risk of laceration.

5 CAUTION: Do not blend hot liquids, doing

so may cause excessive pressure build-up, resulting in risk of the user being burned.

CAUTION: We do not recommend grinding in any of our Nutri Ninja

™

cups.

CAUTION: Remove the Pro Extractor Blades™ Assembly from the cup upon completion of blending. Some ingredients have the potential to expand after blending resulting in excessive pressure buildup that can pose a risk of injury.

8 To protect against electrical shock, do not

submerge the appliance or allow the power cord to come into contact with water or any other liquid.

9 DO NOT allow the appliance to be used by

children. Close attention is necessary when used near children. This is not a toy.

10 Never leave an appliance unattended when in

use.

SAVE THESE

INSTRUCTIONS

Page 3

www.ninjakitchenme.com

25 To reduce risk of injury, never place the blade

assemblies on the base without the pitcher or Nutri Ninja

™

cup properly attached.

26 To reduce the risk of injury, NEVER operate the

appliance without the lid in place; DO NOT try to defeat or bypass the interlock mechanism. When using the removable blades, make sure they are properly installed before operating the appliance.

27 DO NOT expose containers to extreme

temperature changes.

28 DO NOT overﬁll. DO NOT exceed “MAX” ﬁll line.

DO NOT let the power cord hang over the edge of table or counter or touch hot surfaces such as the stove.

30 DO NOT operate the appliance empty. 31 To reduce the risk of burns, always allow the

appliance to cool before taking off parts and before cleaning.

32 Max ON time is 60 seconds under 1500W load.

If the appliance overheats, a thermal switch will become activated and shut off the motor. To reset, unplug the appliance and let it cool down for approximately 15 minutes before using again.

33 In the event that the unit overloads, the control

panel lights will ﬂash and the unit will shut down. Unplug the appliance and let it cool down for approximately 15 minutes before using again.

34 Max PULSE iteration is 30 Pulses. After 30

Pulses allow 10 minutes to pass before running the PULSE function up to an additional 30 Pulses.

35 The maximum rating is based on the Stacked

Blade Assembly (pitcher) that drives the greatest power and other recommended attachments may draw signiﬁcantly less power or current.

To avoid injury, never attempt to place the Pro Extractor Blade™ onto the motor base without ﬁrst assembling the blade assembly to the Nutri Ninja Cup.

37 Appliance accessories are not intended to be

used in the microwave as it may result in damage to the accessories.

38 THIS PRODUCT IS INTENDED FOR HOUSEHOLD

USE ONLY. Do not use this appliance for anything other than its intended use. Do not use outdoors.

11 Turn the appliance off and remove the power cord

from the electrical outlet when not in use, before assembling or disassembling parts, accessing parts that move while in use and before cleaning. To unplug, grasp the plug and pull from the electrical outlet. Never pull from the power cord.

12 DO NOT abuse the power cord. Never carry

the appliance by the power cord or yank it to disconnect from electrical outlet; instead, grasp the plug and pull to disconnect.

DO NOT use with damaged supply cord or plug. If the supply cord or plug is damaged, it must be replaced by the manufacturer, a service center or similar qualiﬁed persons in order to avoid hazard.

14 DO NOT USE if the appliance is not working, has

been dropped, dropped into water, damaged or left outdoors.

15 NO SERVICEABLE PARTS. Incorrect re-assembly or

repair can cause a risk of electrical shock or injury to persons when the appliance is used. Contact Customer Service or a Service Center for the repair

or replacement under the warranty agreement. 16 Always use the appliance on a dry, level surface. 17 Keep hands, hair, clothing, as well as utensils

out of container while processing or blending

to reduce the risk of severe injury to persons or

damage to the appliance. A scraper may be used

but only when the appliance is not running. 18 Avoid contact with moving parts. 19 DO NOT attempt to sharpen blades. 20 DO NOT use the appliance if either set of blades

are bent or damaged. 21 To reduce the risk of injury, never assemble the

Stacked Blade Assembly in the pitcher without the

pitcher being properly attached to the motor base. 22 DO NOT operate this appliance on or near any hot

surfaces (such as gas or electric burner or in a

heated oven). 23

The use of attachments or accessories including

canning jars, not recommended by the manufacturer

may result in ﬁre, electric shock or personal injury. 24 DO NOT remove any container from the motor

base while the appliance is in operation. Always

unplug the unit when not in use.

Page 4

THIS BOOK COVERS MODEL NUMBERS:

BL642ME 30

TECHNICAL SPECIFICATIONS Voltage: 220-240V~, 50/60Hz. Power: 1500W Pitcher Capacity: 2.1L Max Liquid: 2L

Nutri Ninja

™

Cup Capacity: 500ml 650ml 900ml

Page 5

www.ninjakitchenme.com

Contents

Thank you for purchasing the Nutri Ninja™ | Ninja™ Blender Duo with AutoiQ™ Technology.

Getting to Know Your Nutri Ninja | Ninja Blender Duo with Auto-iQ Technology ....................5

Before First Use. ............................................................................................................7

Assembly and Use for the Ninja Blender ..........................................................................8

Assembly and Use for the Nutri Ninja Cups ....................................................................10

Programs, Speed Settings, & Uses for the Blender Pitcher .............................................. 12

Programs, Speed Settings, & Uses for the Nutri Ninja Cups ............................................. 12

Care & Maintenance ....................................................................................................13

Troubleshooting Guide .................................................................................................. 14

Page 6

Getting To Know Your Nutri Ninja™ | Ninja™ Blender Duo with Auto-iQ™ Technology

d Pro Extractor Blades™ Assembly e Sip & Seal™ Lid (x3) f Silicone Grip Sleeve (x3)

a 900ml Nutri Ninja Cup b 650ml Nutri Ninja Cup c 500ml Nutri Ninja Cup

g Blender Pitcher h Blender Lid with locking handle i Stacked Blade Assembly j Motor Base

NOTE: Blades are not interchangeable.

d e f

Page 7

www.ninjakitchenme.com

Nutri Ninja | Ninja Blender Duo with Auto-iQ Technology Features:

• Patent Pending Ninja Blade Technology

• BPA Free Blender Pitcher (maximum liquid capacity 2 L), Nutri Ninja Cups and Lids

• Total Crushing

™

Technology

• Drip-Free Pour Spout

• LED Control Panel with Timer

• Sturdy, Non-Slip Base

• Smart Lid technology for easy release

• 3 speeds: Low, Medium, & High

• 5 Auto-iQ Programs - Auto-iQ Frozen Drinks/Smoothies, Auto-iQ Puree, Nutri Ninja Auto-iQ Blend, Nutri Ninja Auto-iQ

Ultra Blend and Auto-iQ Pulse

• Nutri Ninja Nutrient & Vitamin Extraction*

*Extract a drink containing vitamins and nutrients from fruits and vegetables.

The Nutri Ninja

™

| Ninja™ Blender Duo with Auto-iQ™ Technology is a high powered innovative tool with a sleek design and outstanding performance, a true asset to any kitchen. The Nutri Ninja | Ninja Blender Duo with Auto-iQ Technology features intelligent programs that combine pulsing, blending and pausing patterns that do the work for you! Get great results every time with no guesswork required! For best results, be sure to carefully read all the instructions contained in the manual before using this appliance.

Page 8

Before First Use

PLEASE KEEP THESE IMPORTANT SAFEGUARDS IN MIND WHEN USING THE APPLIANCE:

IMPORTANT: Make sure that the motor base is plugged in for use.

IMPORTANT: Never add ingredients into the container before placing the attachment in ﬁrst.

IMPORTANT: Attachments are not interchangeable.

IMPORTANT: DO NOT attempt to operate the appliance without the lid on.

IMPORTANT: Never run the appliance empty.

IMPORTANT: Appliance accessories are not intended to be used in the microwave as it may result in damage to the accessories.

CAUTION: Do not immerse the motor base

into water or any other liquid.

1 Remove all packaging material and labels from the

appliance. Separate/remove all parts from each other.

2 Wash the containers, lids, blade assemblies and

attachments in warm, soapy water. When washing the blade assemblies, use a dish-washing utensil with a handle to avoid direct hand contact with blades.

WARNING: Handle the Blade Assemblies with

care when washing, as the blades are sharp.

3 Rinse and air dry thoroughly.

4 The containers, lids, blade assemblies and attachments

are all dishwasher safe. The lids and Blade Assemblies are topshelf dishwasher safe. Ensure that the Blade Assemblies are removed from the containers before placing in the dishwasher.

5 Wipe the motor base clean with a damp cloth.

WARNING: Stacked Blade Assembly is sharp and not locked in place. If using the pour spout, ensure the lid is fully locked onto the blender pitcher. Failure to do so will result in a risk of laceration.

WARNING: Stacked Blade Assembly is sharp and not locked in place. If pouring with the lid removed, carefully remove the Stacked Blade Assembly ﬁrst, holding it by the shaft. Failure to do so will result in a risk of laceration.

Page 9

www.ninjakitchenme.com

WARNING: Handle the Stacked Blade Assembly with care, as the blades are sharp. WARNING: Remove utensils prior to processing. Failure to remove may cause the pitcher to be damaged or

to shatter, which may cause personal injury.

WARNING: Never leave the appliance unattended while in use.

CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the

user being burned.

IMPORTANT: Make sure that the motor base is plugged in for use.

Fig. 2

Fig. 4a

HIGH

PULSE

LOW

DOUGH

SMOOTHIE

SINGLE SERVE

PUREE

FROZEN BLENDING

FROZEN DRINKS

SMOOTHIES

PUREE

PULSE

HIGH

MED

LOW

AUTO

Fig. 4b

Fig. 1

Fig. 3

Fig. 5a

Fig. 5b

Assembly and Use for the Ninja™ Blender

1 Review warning and caution statements above before

proceeding to number 2.

2 Place the motor base on a clean, dry, level surface such

as a counter or table top.

3 Holding the Stacked Blade Assembly by the top of the

shaft, place it onto the drive gear inside the pitcher. Ensure that the attachment is seated properly and is standing upright. (Fig. 1)

NOTE: The Stacked Blade Assembly will ﬁt loosely on

the drive gear.

4 Place the motor base on a clean, dry, level surface such

as a counter or table top.

5 Align and lower the Pitcher onto the motor base.

(Fig. 2) Handle should be aligned slightly to the right of the “LOCK” symbol on the motor base.

6 Rotate the pitcher clockwise until it locks in place, you

will hear a click when the lock is engaged. (Fig. 3)

7 The pitcher can be placed on the motor base two ways;

the handle can be on the front right corner or the front left corner. (Fig. 4a, Fig. 4b)

8 Add the ingredients to the pitcher, making sure that

they do not exceed the highest measured marking line on the side of the pitcher.

NOTE: When blending any kind of liquids, such as

mixtures of any drinks or smoothies, do not exceed the “MA X LIQUID” mark (2L) on the pitcher.

NOTE: If you need to add additional ingredients while

the appliance is processing, open the pour spout cap and pour the ingredients in through the opening.

9 Holding the lid by the handle in the upright position, place

it on top of the pitcher aligning the triangle ( ) located on the lid with the triangle ( ) located on the pitcher’s handle. (Fig. 5a) Press the handle down until you hear a click. The triangles on the lid and the blender handle MUST be aligned in order for the blender to turn on. (Fig. 5b)

10 Plug the power cord into the electrical outlet and press

the power button ( ).

IMPORTANT: As a safety feature, the power light

( ) will ﬂash and the motor will not work if the pitcher and lid are not installed correctly. When the pitcher and lid are installed properly, the power light ( ) will be solid, indicating that the appliance is ready for use.

ASSEMBLY

Page 10

NOTE: Nutri Ninja™ | Ninja Blender Duo with Auto-iQ™

Technology can sense which jar is on the motor base. The available function lights will illuminate depending on which jar is placed on the motor base. (Fig. 6)

11 Review warning and caution statements at the top of page 8

before proceeding to number12.

12 Press the power button to turn on the unit. Select

the speed or Auto-iQ program that best suits your needs. The Auto-iQ program will stop the appliance automatically at the end of the program. (Fig. 7)

NOTE: Pulse ingredients for even chopping by holding

the Auto-iQ Pulse button until your desired consistency is reached.

NOTE: Max PULSE iteration is 30 Pulses. After 30

Pulses allow 10 minutes to pass before running the PULSE function up to an additional 30 Pulses.

13 To pause the appliance, press the selected speed or

Auto-iQ program a second time. When the program is paused, the light on the program button will ﬂash until you press it again to resume the rest of the program.

14 When you have reached your desired consistency, stop

the appliance by pressing the power button ( ) and wait for the Stacked Blade Assembly to stop turning.

(Fig. 8)

Assembly and Use for the Ninja™ Blender - cont.

15 Turn the pitcher anticlockwise to remove and then lift

off the base. (Fig. 9)

CAUTION: Never insert your hands in the pitcher

as the blades are sharp. Always use a spatula to dislodge food that has stuck to the sides of the pitcher.

16 Open the pour spout cap and use the spout to empty

liquid contents.

17 For thicker consistencies, ﬁrst remove the lid by

pressing the release button and pulling the lid handle up to a 90 degree angle to lift lid off the pitcher. Then, carefully remove the Stacked Blade Assembly by the top of the shaft. Place Stacked Blade Assembly away from the work area to avoid accidental contact. Finally, empty contents from the pitcher. (Fig. 10)

18 Make sure that the unit is unplugged when not in use.

19 To release the motor base from the counter or table top,

place your hands underneath both sides of the motor base and gently pull the unit up and towards you.

(Fig. 11

)

Fig. 8

USE REMOVAL

Fig. 6

Fig. 9Fig. 7

Fig. 10 Fig. 11

AUTO

Page 11

www.ninjakitchenme.com

Assembly and Use for the Nutri Ninja™ Cups

Fig. 2

IMPORTANT: When processing soft dry ingredients

such as day-old bread or cheese use quick, short 1 second pulses. Do not overﬁll to avoid overheating the appliance. Allow the appliance to cool after each use.

NOTE: Nutri Ninja | Ninja™ Blender Duo with Auto-iQ™

Technology can sense which jar is on the motor base. The available function lights will illuminate depending on which jar is placed on the motor base. (Fig. 1)

1 Review warning and caution statements above

before proceeding to number 2.

2 Place the motor base on a clean, dry, level surface such as a

counter or table top. Press down on the motor base to make sure that the suction cups adhere to the counter or table top.

3 Add ingredients to the Nutri Ninja cup.

4 Place the Pro Extractor Blades Assembly onto the cup and

tightly screw it on clockwise until you have a good seal.

(Fig. 2)

5 Turn the Nutri Ninja cup upside down and place it onto the

motor base, aligning the tabs on the cup with the motor base. Rotate the Nutri Ninja cup clockwise until it locks in place, you will hear a click when the lock is engaged. (Fig. 3)

6 Press the power button on, and select the speed or Auto-iQ

program that suits your needs. (Fig. 4) The Auto-iQ program will stop the appliance automatically at the end of the program.

7 To pause the appliance, press the selected speed or Auto-iQ

program a second time. When the program is paused, the light on the program button will ﬂash until you press it again to resume the rest of the program.

8 Once you have reached your desired consistency, stop the

appliance by pressing the power button and wait for the Pro Extractor Blades Assembly to stop turning. Turn the Nutri Ninja™ cup anticlockwise and pull straight up to remove.

(Fig. 5, Fig. 6)

NOTE: Do not overﬁll! To avoid spilling, do not add ingredients

past the “MAX” ﬁll line.

9 Turn the cup upright and remove the Pro Extractor Blades

Assembly by twisting the Pro Extractor Blades Assembly anticlockwise.

10 Place the Sip & Seal™ lid onto the Nutri Ninja™ cup, twist to

seal and enjoy!

11 Make sure that the motor base is unplugged when not in use.

12 To release the motor base from the counter or table top, place

your hands underneath both sides of the motor base and gently pull the unit up and towards you.

ASSEMBLY USE REMOVAL

Fig. 3

Fig. 4 Fig. 5

Fig. 6

Fig. 1

WARNING: Handle the Pro Extractor Blades™ Assembly with care, as the blades are sharp. WARNING: Remove utensils prior to processing. Failure to remove may cause the Nutri Ninja cup to be

damaged or to shatter, which may cause personal injury.

WARNING: Never leave the appliance unattended while in use.

CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the

user being burned.

CAUTION: Remove the Pro Extractor Blades™ Assembly from the cup upon completion of blending. Some

ingredients have the potential to expand after blending resulting in excessive pressure buildup that can pose a risk of injury.

Page 12

Programs, Speed Settings & Uses for the Blender Pitcher

FUNCTION CONTAINER

BLADE

TYPE

SPEED or PROGRAM TYPE OF FOOD

Processing Blender Pitcher

Stacked Blade

Assembly

Auto-iQ™ Puree

Medium

Dips

Batters

Chopping Blender Pitcher

Stacked Blade

Assembly

Auto-iQ Pulse

High

Salsa

Vegetables

Nuts

Frozen Drinks /

Ice Crush

Blender Pitcher

Stacked Blade

Assembly

Auto-iQ Frozen Drinks/

Smoothies

Ice

Frozen Drinks

Pureeing Blender Pitcher

Stacked Blade

Assembly

Auto-iQ Puree

Smoothies

Soups*

Milkshakes

Programs, Speed Settings & Uses for the Nutri Ninja™ Cup

FUNCTION CONTAINER

BLADE

TYPE

SPEED or PROGRAM TYPE OF FOOD

Smoothies Nutri Ninja Cup

Pro Extractor

Blades™

Assembly

Nutri Ninja Auto-iQ Blend

Smoothies

Frappes

Milkshakes

Protein Drinks

Green Smoothies Nutri Ninja Cup

Pro Extractor

Blades

Assembly

Nutri Ninja Auto-iQ Ultra

Blend

Frozen Fruits

Frozen Vegetables

Kale

Celery

Spinach

Seeds

Ice

Grating Nutri Ninja Cup

Pro Extractor

Blades

Assembly

Auto-iQ Pulse

High

Grated Cheese

Bread Crumbs

Chopping Nutri Ninja Cup

Pro Extractor

Blades

Assembly

Auto-iQ Pulse

High

Salsa

Vegetables

Nuts

IM P ORTA N T: Do not run the appliance over 4 minutes at a time to prevent overheating of the appliance. * When blending sauces and soups, make sure they’re cooled to room temperature ﬁrst - Ninja™ containers are not intended for

hot blending.

Page 13

www.ninjakitchenme.com

Care & Maintenance

HOW TO STORE

1 Store the Nutri Ninja™ | Ninja™ Blender Duo™ with

AUTO-iQ™ Technology upright with the blade assembly inside the corresponding container with the lid secured on top. Do not place anything on top. Store the rest of the attachments in a safe place where they will not be damaged and won’t cause harm.

RESETTING THE MOTOR THERMOSTAT

Store the

Nutri Ninja™ | Ninja™ Blender Duo™ with AUTO-iQ™ Technology features a unique safety system which prevents damage to the unit’s motor and drive system should you inadvertently overload your appliance. If the appliance is being overloaded,

the motor will stop. Allow the appliance to cool for approximately 15 minutes. To reset the

appliance, follow the resetting procedure below:

Unplug the appliance from the electrical outlet.

Remove and empty the container and ensure that no

food is jamming the blade assembly.

Allow the appliance to cool for approximately 15

minutes.

Re-install the container onto the base and re-plug the

appliance into the electrical outlet.

Proceed to use the appliance as before making sure not to exceed the recommended maximum capacities.

HOW TO CLEAN

CAUTION: Make sure that the motor base is

unplugged from the power source before inserting or removing any attachment and before cleaning.

CAUTION: DO NOT immerse the motor base into

water or any other liquid.

1 Separate/remove all parts from each other.

2 Hand Washing:

Wash the containers, lids, blade

assemblies and attachments in warm, soapy water

. When washing the blade assemblies, use a dish-washing utensil with a handle to avoid direct hand contact with blades. Handle blade assemblies with care to avoid contact with sharp edges. Rinse and air dry thoroughly.

Dishwasher: Containers, lids, blade assemblies and attachments are all dishwasher safe. The lids and blade assemblies are top rack dishwasher safe. Ensure that the blade assemblies are removed from the containers before placing in the dishwasher.

WARNING: Handle the Blade Assemblies with

care when washing, as the blades are sharp. Contact with the blades’ edges can result in laceration.

3 Wipe the motor base clean with a damp cloth

Please contact customer service if any servicing needs to be

performed on the appliance at support@ninjakitchenme.com

Page 14

Troubleshooting Guide

PROBLEMS POSSIBLE REASONS & SOLUTIONS

Motor Doesn’t Start or Blade Assembly Doesn’t Rotate.

Make sure the container is securely placed on motor base.

Make sure the lid is securely on container in the correct position (align arrows).

The appliance is turned “Off”. Press the power button (

) to turn “On”.

Check that the plug is securely inserted into the electrical outlet.

Check the fuse or circuit breaker.

The unit has overloaded. The appliance will stop and the power light will ﬂash. Unplug and wait approximately 15 minutes before using again.

The unit has overheated. Unplug and wait approximately 15 minutes before using again.

Check to make sure the unit is not overloaded.

Food is Unevenly Chopped.

Either you are chopping too much food at one time, or the pieces are not of even size and processing smaller amounts per batch.

Food is Chopped Too Fine or is Too Watery.

The food has been over processed. Use Auto-iQ™ Pulse button for controlled processing.

Food Collects On Lid or On the Sides of the Container.

The mixture is too thick. Add more liquid.

You Cannot Achieve Snow From Solid Ice.

Do not use ice that has been sitting out or has started to melt. Use ice straight from the freezer.

Start with a few pulses and then go to a continuous blending cycle.

Motor Base Won’t Stick to Counter or Table Top.

Make sure surface and suction feet are wiped clean. Suction feet will only stick to smooth surfaces. Suction feet WILL NOT stick on some surfaces such as, wood, tile and non-polished ﬁnishes.

DO NOT attempt to use appliance when the motor base is stuck to a surface that is not secure, (cutting board, platter, plates, etc.).

You get an “Err” Message

Your Ninja™ is able to detect which jar is on the base. You may be trying to use a program that is not designed for the jar you have installed. The programs will light up indicating which programs are available for each jar.

You have a blinking red light

The unit is not installed properly. For your safety the unit will only be able to be turned on when it is properly assembled. Please refer to the assembly pages of this inspiration guide for assistance.

Page 15

www.ninjakitchenme.com

TWO (2) YEAR LIMITED WARRANTY

Carlton Brands FZC warrants this product to be free from material defects and workmanship for a period of two (2) years from the date of purchase when utilised for normal household use, subject to the following conditions, exclusions and exceptions.

• The liability of Carlton Brands FZC is limited solely to the cost of the repair or replacement of the unit at our option.

• The guarantee does not cover products and/or product parts that are subject to normal wear that can be considered as consumable parts by their nature or that are made of glass.

• The warranty is void if any unit is tampered with or used for commercial purposes.

• The warranty is not valid if a defect is due to damage caused by incorrect use, poor maintenance, faulty packaging, mishandling in transit, or if service, alterations or repairs have been carried out by persons not authorised by Carlton Brands FZC.

• For the appliance to be used correctly, the user should strictly adhere to all instructions included in the Owner’s Guide and should refrain from any actions or uses which are warned against in the Owner’s Guide.

SUPPORT

If your appliance fails to operate properly while in use under normal household conditions within the warranty period, return the complete appliance and accessories to the customer service department at the point of purchase. If the appliance is found to be defective in material or workmanship, the unit will be repaired or replaced free of charge and can be collected from the point of purchase. For assistance with warranty, service options or customer support, please visit our website: www.ninjakitchenme.com or email: support@ninjakitchenme.com

This Limited Warranty is extended to the original purchaser of the unit and excludes all other legal, implied and/ or conversional warranties.

*IMPORTANT: Carefully pack all contents of the product to avoid damage in shipping. Be sure to include proof of purchase date and to attach tag to them before packing with your name, complete address and phone number with a note giving purchase information, model number and what you believe is the problem with the item.

Page 16

Manufacturer:

SharkNinja Operating LLC 180 Wells Avenue Suite 200, Newton MA 02459 United States of America

Importer & Customer Service:

Carlton Brands FZC Ofﬁce No. 4 18th Street, Behind Home Center, Dubai United Arab Emirates

www.ninjakitchenme.com

email: support@ninjakitchenme.com

Auto-iQ, Nutri-Ninja, Ninja, Pro Extractor Blades, Sip & Seal and Total Crushing are trademarks of SharkNinja Operating LLC.

Printed in China

Illustrations may differ from actual product. We are constantly striving to improve our products, therefore the speciﬁcations contained herein are subject to change without notice.

BL642ME_30_EN_IB_160525_1_V1