Ninja BL641 Owner's Manual

Download

Page 1

BL641

OWNER’S GUIDE

ninjakitchen.com

1 877 646-5288

Page 2

IMPORTANT SAFETY INSTRUCTIONS

For Household Use Only

WHEN USING ELECTRICAL APPLIANCES, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED, INCLUDING THE FOLLOWING:

READ ALL INSTRUCTIONS BEFORE USING YOUR NUTRI NINJA® | NINJA® BLENDER DUO™ WITH AUTO-IQ™ TECHNOLOGY.

POLARIZED PLUG

WARNING: To reduce the risk of

electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will ﬁt into a polarized outlet only one way. If the plug does not ﬁt fully into the outlet, reverse the plug. If it still does not ﬁt, contact a qualiﬁed electrician to install the proper outlet. DO NOT modify the plug in any way.

WARNING: Extension cords are

not recommended for use with this product.

WARNING:

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:

1 WARNING: Remove utensils prior to

processing. Failure to remove may cause the jar to be damaged or to shatter which may cause personal injury.

2 WARNING: Stacked Blade Assembly

is sharp, not locked in place and removable, handle with care. When handling the Stacked Blade Assembly, always hold it by the shaft. Failure to do so will result in a risk of laceration.

3 WARNING: Stacked Blade Assembly

is sharp and not locked in place. If using the pour spout, ensure the lid is fully locked onto the pitcher. If pouring with the lid removed, carefully remove the Stacked Blade Assembly ﬁrst, holding it by the shaft. Failure to do so will result in a risk of laceration.

4 CAUTION: Do not blend hot liquids,

doing so may cause excessive pressure build-up, resulting in risk of the user being burned.

5 CAUTION: We do not recommend

grinding in any of our Nutri Ninja® Cups.

6 CAUTION: Remove the Pro Extractor

Blades® Assembly from the Nutri Ninja cup upon completion of blending. Some ingredients have the potential to expand after blending resulting in excessive pressure buildup that can pose a risk of injury.

7 To protect against electrical shock, do not

submerge the appliance or allow the power cord to come into contact with water or any other liquid.

8 DO NOT allow the appliance to be used by

children. Close attention is necessary when used near children. This is not a toy.

9 Never leave an appliance unattended when in

use.

10 Appliance accessories are not intended to

be used in the microwave as it may result in damage to the accessories.

11 Turn the appliance Off and remove the power

cord from the electrical outlet when not in use, before assembling or disassembling parts and before cleaning. To unplug, grasp the plug and pull from the electrical outlet. Never pull from the power cord.

12 DO NOT abuse the power cord. Never carry

the appliance by the power cord or yank it to disconnect from electrical outlet; instead grasp the plug and pull to disconnect.

13 DO NOT operate any appliance with a

damaged cord or plug, or after the appliance malfunctions, has been dropped or damaged in any manner. This appliance has no serviceable parts. Return the appliance to SharkNinja Operating LLC for examination, repair or adjustment.

14 DO NOT let the power cord hang over

the edge of table or counter or touch hot

surfaces such as the stove. 15 Always use appliance on a dry, level surface. 16 Keep hands, hair, clothing, as well as

utensils out of container while processing to

reduce the risk of severe injury to persons

or damage to the appliance. A scraper may

be used but only when the appliance is not

running. 17 Avoid contact with moving parts. 18 DO NOT attempt to sharpen blades. 19 DO NOT use the appliance if blade

assemblies are bent or damaged. 20 To reduce risk of injury, never place the

blade assemblies on the base without the

pitcher or Nutri Ninja cup properly attached.

21 DO NOT operate this appliance on or near

22 The use of attachments or accessories

23 DO NOT remove the container from the

24 To reduce the risk of injury, NEVER operate

25 DO NOT expose containers to extreme

26 DO NOT overﬁll. 27 DO NOT operate the appliance empty. 28 To reduce the risk of burns, always allow the

29 In the event that the unit overloads, the

30 THIS PRODUCT IS INTENDED FOR

31 The maximum rating is based on the

SAVE THESE INSTRUCTIONS

any hot surfaces (such as gas or electric burner or in a heated oven).

including canning jars, not recommended by the manufacturer may result in ﬁre, electric shock or personal injury.

motor base while the appliance is in operation.

the appliance without the lid in place; DO NOT try to defeat the interlock mechanism; make sure that the attachment is properly installed before operating the appliance.

temperature changes.

appliance to cool before taking off parts and before cleaning.

control panel lights will ﬂash and the unit will shut down. Unplug the appliance and let it cool down for approximately 15 minutes before using again.

HOUSEHOLD USE ONLY. Do not use this appliance for anything other than its intended use. Do not use outdoors.

Stacked Blade Assembly (pitcher) that drives the greatest power and other recommended attachments may draw signiﬁcantly less power or current.

1 2

www.ninjakitchen.com1-877-646-5288

Page 3

Contents

Thank you for purchasing the Nutri Ninja®| Ninja® Blender Duo™ with Auto-iQ™ Technology.

Getting to Know Your Nutri Ninja® | Ninja® Blender Duo™ with Auto-iQ™ Technology ............5

Before First Use . ...........................................................................................................7

Assembly and Use of the Pitcher ..................................................................................... 8

Assembly and Use of the Nutri Ninja Cups ..................................................................... 10

Programs, Speed Settings, & Uses for the Pitcher ..........................................................11

Programs, Speed Settings, & Uses for the Nutri Ninja Cup ..............................................11

Care & Maintenance ....................................................................................................12

Troubleshooting Guide ..................................................................................................13

Replacement Parts ....................................................................................................... 13

Warranty & Registration ................................................................................................14

THIS BOOK COVERS MODEL NUMBER:

BL641

TECHNICAL SPECIFICATIONS Voltage: 120V~, 60Hz. Power: 1300 Watts Pitcher Capacity: 72 oz. (9 cups, 2.1 L) Max Liquid Capacity: 64 oz. (8 cups, 1.9 L) Nutri Ninja® Cup Capacity: 24 oz. (3 cups, 710 mL) 32 oz. (4 cups, 950 mL)

3 4

www.ninjakitchen.com1-877-646-5288

Page 4

Getting To Know Your Nutri Ninja® | Ninja® Blender Duo™ with Auto-iQ™ Technology

c d

The Nutri Ninja® | Ninja® Blender Duo™ with Auto-iQ™ Technology is a professional, high powered innovative tool with a sleek design and outstanding performance, a true asset to any kitchen. The Nutri Ninja | Ninja Blender Duo with Auto-iQ Technology features intelligent programs that combine unique pulsing, blending and pausing patterns that do the work

for you! Get great results every time with no guesswork required! For best results, be sure to carefully read all the

instructions contained in the manual before using this appliance.

Nutri Ninja | Ninja Blender Duo™ with Auto-iQ™ Technology Features:

• Ninja Blade Technology

• BPA Free Pitcher, Nutri Ninja® Cups and Lids

• Drip-Free Pour Spout

• LED Control Panel with Time

• Sturdy, Non-Slip Base

• Smart Lid technology for easy release

• 3 speeds: Low, Medium, & High

• 5 Auto-iQ Programs - Auto-iQ Frozen Drinks/Smoothies, Auto-iQ Puree, Nutri Ninja Auto-iQ Blend, Nutri Ninja Auto-iQ

Ultra Blend and Auto-iQ Pulse

• Nutri Ninja Nutrient & Vitamin Extraction*

* Extract a drink containing vitamins and nutrients from fruits and vegetables

a Jumbo Multi Serve 32 oz. Nutri Ninja Cup

b Regular 24 oz. Nutri Ninja Cup

e Pitcher f Pitcher Lid with Locking Handle g Stacked Blade Assembly

h Motor Base i Power Cord (not shown)

c Pro Extractor Blades® Assembly d Sip & Seal® Lids (x2)

NOTE: Blade assemblies are not

interchangeable.

5 6

www.ninjakitchen.com1-877-646-5288

Page 5

Before First Use

PLEASE KEEP THESE IMPORTANT SAFEGUARDS IN MIND WHEN USING THE APPLIANCE:

IMPORTANT: Make sure that the motor base

is plugged in for use.

IMPORTANT: Never add ingredients into the

container before placing the blade assembly in ﬁrst.

IMPORTANT: Blade assemblies are not

interchangeable.

IMPORTANT: DO NOT at tempt to operate the

appliance without the lid on.

IMPORTANT: Never run the appliance empty.

IMPORTANT: Appliance accessories are not

intended to be used in the microwave as it may result in damage to the accessories.

WARNING: Stacked Blade Assembly is sharp and not locked in place. If using the pour spout, ensure the lid is fully locked onto the pitcher. Failure to do so will result in a risk of laceration.

WARNING: Stacked Blade Assembly is sharp and not locked in place. If pouring with the lid removed, carefully remove the Stacked Blade Assembly ﬁrst, holding it by the shaf t. Failure to do so will result in a risk of laceration.

Assembly and Use of the Pitcher

WARNING: Handle the Stacked Blade Assembly with care, as the blades are sharp. WARNING: Remove utensils prior to processing. Failure to remove may cause the pitcher to be damaged or

to shatter, which may cause personal injury. WARNING: Never leave the appliance unattended while in use. CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the

user being burned.

IMPORTANT: Make sure that the motor base is plugged in for use.

ASSEMBLY

Fig. 3a

Fig. 1

Fig. 2

It’s best to add the liquid ingredients ﬁrst and then the dry ingredients.

Fig. 3b

Fig. 4

Fig. 5a

Fig. 5b

1 Review warning and caution statements above before

CAUTION: Do not immerse the motor base into

water or any other liquid.

1 Remove all packaging material and labels from the

appliance. Separate/remove all parts from each other.

2 Wash the lids, pitcher, Nutri Ninja® cups and Blade

Assemblies in warm, soapy water. When washing the blade assemblies, use a dish-washing utensil with a handle to avoid direct hand contact with blades.

WARNING: Handle the Blade Assemblies with

care when washing, as the blades are sharp.

3 Handle blade assemblies with care to avoid contact

with sharp edges. Rinse and air dry thoroughly.

4 The pitcher, Nutri Ninja cups, lids, and blade

assemblies, are all dishwasher safe. It is recommended that the lids and blade assemblies be placed on the top rack. Ensure that the blade assemblies are removed from the containers before placing in the dishwasher.

5 Wipe the motor base clean with a damp cloth.

7 8

proceeding to number 2.

2 Place the motor base on a clean, dry, level surface such

as a counter or table top. Press down on the motor

base to make sure that the suction cups adhere to the

counter or table top.

3 Align and lower the pitcher onto the motor base.

(Fig. 1) Handle should be aligned slightly to the right of

the “LOCK” symbol on the motor base.

4 Rotate the pitcher clockwise until it clicks in place. As

the pitcher rotates, it will lower and the safety tabs on

the bottom of the pitcher will slide under the safety tabs

on the top of the motor base. (Fig. 2)

5 The pitcher can be placed on the motor base two ways;

the handle can be on the front right corner or the front

left corner. (Fig. 3a, Fig. 3b)

6 Holding the Stacked Blade Assembly by the top of the

shaft, place it onto the drive gear inside the pitcher.

Ensure that the Stacked Blade Assembly is seated

properly and is standing upright. (Fig. 4)

NOTE: The Stacked Blade Assembly will ﬁt loosely on

the drive gear.

7 Add the ingredients to the pitcher, making sure that

they do not exceed the highest measured marking line on the side of the pitcher.

NOTE: If you need to add additional ingredients while

the appliance is processing, open the pour spout cap and pour the ingredients in through the opening.

NOTE: When blending any kind of liquids, such as

mixtures of any drinks or smoothies, do not exceed the “MAX” liquid mark (1.9 L) on the pitcher.

8 Plug the power cord into the electrical outlet and press

the power button ( ).

IMPORTANT: As a safety feature, the power light

( ) will ﬂash and the motor will not work if the pitcher and lid are not installed correctly. When the pitcher and lid are installed properly, the power light ( ) will be solid, indicating that the appliance is ready for use.

9 Holding the lid by the handle in the upright position,

place it on top of the Pitcher aligning the triangle ( ) located on the lid with the triangle ( ) located on the Pitcher’s handle. (Fig. 5a) Press the handle down until you hear a click. The triangles on the lid and the pitcher handle MUST be aligned in order for the blender to turn on. (Fig. 5b)

www.ninjakitchen.com1-877-646-5288

Page 6

Assembly and Use of the Pitcher - cont.

USE REMOVAL

Assembly and Use of the Nutri Ninja® Cup

WARNING: Handle the Pro Extractor Blades® Assembly with care, as the blades are sharp. WARNING: Remove utensils prior to processing. Failure to remove may cause the Nutri Ninja cup to be

damaged or to shatter, which may cause personal injury. WARNING: Never leave the appliance unattended while in use. CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the

user being burned.

CAUTION: Remove the Pro Extractor Blades® Assembly from the cup upon completion of blending. Some

ingredients have the potential to expand after blending resulting in excessive pressure buildup that can

pose a risk of injury.

IMPORTANT: Make sure that the motor base is plugged in for use.

Fig. 6

Fig. 8 Fig. 9Fig. 7 Fig. 10

10 Review ALL warning and caution statements before

proceeding.

NOTE: Nutri Ninja® | Ninja® Blender Duo™ with Auto-iQ™

Technology can sense which jar is on the motor base. The available function lights will illuminate depending on which jar is placed on the motor base. (Fig. 6)

11 Press the power button to turn on the unit. Select

the speed or Auto-iQ program that best suits your needs. The Auto-iQ program will stop the appliance automatically at the end of the program. (Fig. 7)

12 To pause the appliance, press the selected speed or

Auto-iQ program a second time. When the program is paused, the light on the program button will ﬂash until you press it again to resume the rest of the program.

13 When you have reached your desired consistency, stop

the appliance by pressing the power button ( ) and wait for the Stacked Blade Assembly to stop turning.

(Fig. 8)

14 Turn the pitcher counter clockwise to remove and then

lift off the base. (Fig. 9)

WARNING: Never inser t your hands in the pitcher

as the Stacked Blade Assembly is sharp. Always use a spatula to dislodge food that has stuck to the sides of the pitcher.

15 Open the pour spout cap and use the spout to empty

liquid contents.

16 For thicker consistencies, ﬁrst remove the lid by

pressing the release button and pulling the lid handle up to a 90 degree angle to lift lid off the pitcher. Then, carefully remove the Stacked Blade Assembly by the top of the shaft. Place Stacked Blade Assembly away from the work area to avoid accidental contact. Finally, empty contents from the pitcher. (Fig. 10)

17 Make sure that the unit is unplugged when not in use.

ASSEMBLY USE REMOVAL

Fig. 1

Fig. 2

NOTE: Nutri Ninja® | Ninja® Blender Duo™ with Auto-iQ™

Technology can sense which jar is on the motor base. The

available function lights will illuminate depending on which jar

is placed on the motor base. (Fig. 1)

1 Review warning and caution statements above before

proceeding to number 2.

2 Place the motor base on a clean, dry, level surface such as a

counter or table top. Press down on the motor base to make

sure that the suction cups adhere to the counter or table top.

3 Add ingredients to the Nutri Ninja cup. 4 Place the Pro Extractor Blades Assembly onto the cup and

tightly screw it on clockwise until you have a good seal.

(Fig. 2)

5 Turn the Nutri Ninja cup upside down and place it onto the

motor base, aligning the tabs on the cup with the motor base.

Rotate the Nutri Ninja cup clockwise until it locks in place, you

will hear a click when the lock is engaged. (Fig. 3)

6 Press the power button on, and select the speed or Auto-iQ

program that suits your needs. (Fig. 4) The Auto-iQ program

Fig. 3

Fig. 4 Fig. 5 Fig. 6

will stop the appliance automatically at the end of the program.

7 To pause the appliance, press the selected speed or Auto-iQ

program a second time. When the program is paused, the light on the program button will ﬂash until you press it again to resume the rest of the program.

8 Once you have reached your desired consistency, stop the

appliance by pressing the power button and wait for the blade to stop turning. Turn the Nutri Ninja cup counter-clockwise and pull straight up to remove. (Fig. 5, Fig. 6)

NOTE: Do not overﬁll! To avoid spilling, do not add ingredients

past the “Max Liquid” line.

9 Turn the cup upright and remove the Pro Extractor Blades

Assembly by twisting the Pro Extractor Blades Assembly counter clockwise.

10 Place the Sip & Seal® lid onto the Nutri Ninja cup, twist to seal

and enjoy!

11 Make sure that the motor base is unplugged when not in use.

9 10

www.ninjakitchen.com1-877-646-5288

Page 7

Programs, Speed Settings & Uses for the Pitcher

Care & Maintenance

FUNCTION CONTAINER

Processing Pitcher

Chopping Pitcher

Frozen Drinks /

Ice Crush

Pureeing Pitcher

* When blending soups or sauces, make sure they’re cooled to room temperature ﬁrst - Ninja containers

are not intended for hot blending.

Pitcher

BLADE

TYPE

Stacked Blade

Assembly

Stacked Blade

Assembly

Stacked Blade

Assembly

Stacked Blade

Assembly

SPEED or

PROGRAM

Auto-iQ™ Puree

Medium

Auto-iQ Pulse

Auto-iQ Frozen Drinks/

Smoothies

Auto-iQ Puree

Programs, Speed Settings & Uses for the Nutri Ninja® Cup

FUNCTION CONTAINER

Smoothies Nutri Ninja® Cup

Green Smoothies Nutri Ninja Cup

Grating Nutri Ninja Cup

Chopping Nutri Ninja Cup

BLADE

TYPE

Pro Extractor

Blades™

Assembly

Pro Extractor

Blades

Assembly

Pro Extractor

Blades

Assembly

Pro Extractor

Blades

Assembly

SPEED or

PROGRAM

Nutri Ninja Auto-iQ Blend

Nutri Ninja Auto-iQ Ultra

Blend

Auto-iQ Pulse

High

Auto-iQ Pulse

High

TYPE OF FOOD

Dips

Batters

Salsa

Vegetables

Nuts

Ice

Frozen Drinks

Smoothies

Soups*

Milkshakes

TYPE OF FOOD

Smoothies

Frappes

Milkshakes

Protein Drinks

Frozen Fruits

Frozen Vegetables

Kale

Celery

Spinach

Seeds

Ice

Grated Cheese Bread Crumbs

Spices

Salsa

Vegetables

Nuts

HOW TO CLEAN

CAUTION: Make sure that the motor base is

unplugged from the power source before inserting

or removing any blade assembly and before

cleaning.

CAUTION: DO NOT immerse the motor base into

water or any other liquid.

1 Separate/remove all parts from each other.

Hand Washing: Wash the lids, pitcher, Nutri Ninja®

cup, and blade assemblies in warm, soapy water. When

washing the blade assemblies, use a dish-washing

utensil with a handle to avoid direct hand contact with

blades. Handle blade assemblies with care to avoid

contact with sharp edges. Rinse and air dry thoroughly.

Dishwasher: The containers, lids, blade assemblies

and attachments are all dishwasher safe. The lids

and blade assemblies are top rack dishwasher safe.

Ensure that the blade assemblies are removed from the

containers before placing in the dishwasher.

WARNING: Handle the Stacked Blade Assembly,

and Pro Extractor Blade Assembly with care

when washing, as the blades are sharp. Contact

with the blades’ edges can result in laceration.

Wipe the motor base clean with a damp cloth

Please call customer service if any servicing needs to be

performed on the appliance at 1-877-646-5288.

HOW TO STORE

1 Store the

Nutri Ninja® | Ninja® Blender Duo™ with Auto-iQ™ Technology inside the corresponding container with the lid secured on top. Do not place anything on top. Store the rest of the attachments in a safe place where they will not be damaged and won’t cause harm. around the cord wrap on the back of the motor base.

upright

with the blade assembly

Wrap the power cord

RESETTING THE MOTOR THERMOSTAT

The Nutri Ninja | Ninja Blender Duo with Auto-iQ

Technology features a unique safety system which prevents damage to the unit’s motor and drive system should you inadvertently overload your appliance. If

the appliance is being overloaded, the motor will stop. Allow the appliance to cool for approximately 15 minutes. To reset the appliance,

follow the resetting procedure below:

Unplug the appliance from the electrical outlet.

Remove and empty the container and ensure that no

food is jamming the blade assembly or attachments.

Allow the appliance to cool for approximately 15

minutes.

Re-install the container onto the base and re-plug the

appliance into the electrical outlet.

Proceed to use the appliance as before making sure not to exceed the recommended maximum capacities.

11 12

www.ninjakitchen.com1-877-646-5288

Page 8

Troubleshooting Guide

PROBLEMS POSSIBLE REASONS & SOLUTIONS

Motor Doesn’t Start or Blade Assembly Doesn’t Rotate.

Food is Unevenly Chopped.

Food is Chopped Too Fine or is Too Watery.

Food Collects On Lid or On the Sides of the Container.

You Cannot Achieve Snow From Solid Ice.

Motor Base Won’t Stick to Counter or Table Top.

You get an “Err” Message

Make sure the container is securely placed on motor base.

Make sure the lid is securely on container in the correct position (align arrows).

The appliance is turned “Off”. Press the power button ( ) to turn “On”.

Check that the plug is securely inserted into the electrical outlet.

Check the fuse or circuit breaker.

The unit has overloaded. The appliance will stop and the power light will ﬂash. Unplug and wait approximately 15 minutes before using again.

The unit has overheated. Unplug and wait approximately 15 minutes before using again.

Check to make sure the unit is not overloaded.

Either you are chopping too much food at one time, or the pieces are not of even size and processing smaller amounts per batch.

The food has been over processed. Use Auto-iQ™ Pulse button for controlled processing.

The mixture is too thick. Add more liquid.

Do not use ice that has been sitting out or has started to melt. Use ice straight from the freezer.

Start with a few pulses and then go to a continuous blending cycle.

Make sure surface and suction feet are wiped clean. Suction feet will only stick to smooth surfaces. Suction feet WILL NOT stick on some surfaces such as, wood, tile and non-polished ﬁnishes.

DO NOT attempt to use appliance when the motor base is stuck to a surface that is not secure, (cutting board, platter, plates, etc.).

Your Ninja® is able to detect which jar is on the base. You may be trying to use a program that is not designed for the jar you have installed. The programs will light up indicating which programs are available for each jar.

ONE (1) YEAR LIMITED WARRANTY

SharkNinja Operating LLC warrants this product to be free from material defects and workmanship for a

period of one (1) year from the date of purchase when utilized for normal household use, subject to the following conditions, exclusions and exceptions.

The liability of SharkNinja Operating LLC is limited solely to the cost of the repair or replacement of the unit at our option. This Limited Warranty does not cover normal wear of parts and does not apply to any unit that has been tampered with or used for commercial purposes. This Limited Warranty does not cover damage caused by misuse, abuse, negligent handling or damage due to faulty packaging or mishandling in transit. This Limited Warranty does not cover damage or defects caused by or resulting from damages from shipping or repairs, service or alteration to the product or any of its parts, which have been performed by a repair person not authorized by SharkNinja Operating LLC.

If your appliance fails to operate properly while in use under normal household conditions within the warranty period, return the complete appliance and accessories, freight prepaid. For assistance with warranty service options or customer support, please call our customer care and product specialists at , call 1-877-646-5288 or visit our website www.ninjakitchen.com.

If the appliance is found to be defective in material or workmanship, SharkNinja Operating LLC will repair or replace it free of charge. Proof of purchase is required and a fee of $19.95 will apply to cover the cost of return freight. *

This Limited Warranty is extended to the original purchaser of the unit and excludes all other legal, implied and/ or conventional warranties. The responsibility of SharkNinja Operating LLC if any, is limited to the speciﬁc obligations expressly assumed by it under the terms of this Limited Warranty. In no event is SharkNinja Operating LLC liable for incidental or consequential damages to anyone of any nature whatsoever. Some states do not permit the exclusion or limitation of incidental or consequential damages, so the above may not apply to you.

This Limited Warranty gives you speciﬁc legal rights, and you may also have other rights which vary from state to state or from province to province.

*IMPORTANT: Carefully pack item to avoid damage in shipping. Be sure to include proof of purchase date and to attach tag to item before packing with your name, complete address and phone number with a note giving purchase information, model number and what you believe is the problem with the item. We recommend you insure the package (as damage in shipping is not covered by your Limited Warranty). Mark the outside of your package “ATTENTION CUSTOMER SERVICE”.

The unit is not installed properly. For your safety the unit will only be able to

You have a blinking red light

be turned on when it is properly assembled. Please refer to the assembly pages of this inspiration guide for assistance.

Product Registration

Replacement Parts

ORDERING REPLACEMENT PARTS

To order additional parts and attachments, please visit our website: www.ninjakitchen.com or feel free to contact customer service: 1-877-646-5288.

13 14

Please visit www.ninjakitchen.com or call 1-877-646-5288 to register your new Ninja® product within ten (10) days of purchase. You will be asked to provide the store name, date of purchase and model number along with your name and address.

The registration will enable us to contact you in the unlikely event of a product safety notiﬁcation. By registering you acknowledge to have read and understood the instructions for use, and warnings set forth in the accompanying instructions.

www.ninjakitchen.com1-877-646-5288

Page 9

SharkNinja Operating LLC US: Newton, MA 02459 CAN: Ville St- Laurent, QC H4S 1A7

1-877-646-5288

www.ninjakitchen.com

Ninja, Nutri Ninja, Pro Ext ractor Blades and Sip & Seal and are registered trademarks of SharkNinja Operating LLC.

Auto-iQ and Blender Duo are trademarks of SharkNinja Operating LLC.

For SharkNinja U.S. Patent Information visit www.sharkninja.com/ USPatents.

Illustrations may dif fer from actual product. We are constantly striving to improve our products, therefore the specifications contained herein are subject to change without notice.

Printed in China

BL641_3 0_160119_4