Advolution™ 2710
Rider Burnisher
Smart cleaning.
A Nilfisk-Advance Brand
Advolution™ 2710
Rider Comfort and Increased Run-Time.
Rider Burnisher
The Advolution™ 2710 battery-powered rider burnisher from Advance
is designed around a front steering system – accepted industry-wide
as being the easiest to control and maneuver. A unique One-Touch™
control pad simplifies operator training and equipment operation.
The Advolution 2710 rider burnisher does the rest by automatically
monitoring and controlling optimum pad pressure for a consistent,
superior gloss every time. A mid-mounted 27 inch burnishing head
allows users to easily access the pad retainer.
The Advolution 2710 rider burnisher increases operator productivity
with its ride-on capability and extended battery run-time. The
burnishing pad operates at a speed of 1,600 rpms and utilizes three
different pressure settings. On average, battery run-time on this rider
burnisher allows the operator to burnish over 30,000 square feet
(9,144 meters) per hour. Maximum tested productivity is even higher,
with results exceeding 135,000 (41,148 meters) square feet on a single
battery charge.
The Advolution 2710 is perfect for daytime burnishing. It operates at
69 dB A, which is the volume level of standard conversation. Battery
operation is the clean and quiet alternative to using a propane burnisher.
Ideal applications include:
• Hospitals / Healthcare Facilities
• Commercial Cleaning
• Educational Facilities
• Government Buildings
and Installations
• Retail Stores and Malls
• Airports / Train Stations /
Bus Depots
Operators of the Advolution 2710 rider burnisher can expect
uncompromised safety. Open sight lines in front of the machine create
a safe and comfortable ride for the operator. Automatic safeguards
eliminate unmanned start-ups, which can lead to damaged floor
finish. A safety switch prevents accidental pad start-up in the tilt-up
position. Passive dust control is standard on the Advolution 2710 rider
burnisher, which reduces the need for dust mopping. An active dust
control kit is available as an option for environments that require a
higher degree of filtration.
A Nilfisk-Advance Brand
Plug for onboard charger option is
easily accessible.
Batteries are
accessible under
the operator seat
Full tilt steering for
operator comfort
Tilt-up burnishing head
makes changing the
pad quick and easy
Mid-mounted, burnishing head tilts up for
access to change burnishing pads quickly
and easily.
Steering is adjustable to five positions for
operator comfort.
Equipped with optional accessory kits, the
Advolution™ 2710 becomes multi-functional.
Mid-mounted floating
burnishing head follows
uneven floor contours
Front steering system is
ideal for maneuvering
through congested areas
One-Touch™ electronic function controls are conveniently
located to keep operation simple and safe.
Rugged construction with durable components assures
years of reliable performance.
Easy access to batteries and other components assures
minimal downtime.
Simple, One-Touch™ operators button.
Low sound level permits operation
anywhere, anytime.
FEATURES AND BENEFITS
Technical Specifications
Pad Motor 3.25 hp
Pad Driver 27 in (68.6 cm) flexible pad driver with 3.5 in (9 cm) centering device.
Pad Motor Speed No load 1,760 RPM / Under load 1,500 RPM
Max Productivity @ 3.5 mph (5.6 km/hr) Per hour: 41,580 ft2/hr (3,863 m2/hr)
Per battery charge: 137,214 ft2 (112,748 m2)
Pad Access Pivoting burnishing head for easy pad access; safety switch prevents
accidental startup when burnishing head is tilted up.
Pad Pressure Adjustment Variable between 3 settings; 50-75 lb
Electronic pad pressure system automatically controls consistency of
pad pressure to maximize performance based on the setting selected.
Body Construction All steel chassis and rotational molded body. Steel burnishing head linkage and steering column.
Dust Control Passive dust control standard; active dust control kit (3 levels of filtration) optional.
Drive System 1 hp, 700 W permanent magnet motor with gear transmission and non-marking wheel.
0-4.5 mph (0-7.2 km/hr) transport; 0-3.5 mph (0-5.6 km/hr) burnishing.
Dynamic speed control plugging service brake.
Automatic electromechanical parking brake.
Wheels Two 12 in (30.5 cm) diameter non-marking rear wheels.
Power Source Six 6 V DC / 395 Ah batteries
Operator Interface Tilt steering and adjustable seat with deadman safety switch.
Sound Level 69 dB A at operator position
Minimum Aisle Turn Width 72 in (183 cm)
Dimensions Length 65.5 in (166 cm) Height 54 in (137 cm) Width 32 in (91 cm)
Machine Weight Without batteries 484 lb (220 kg) / With batteries 1,204 lb (546 kg)
Part Numbers
Advolution™ 2710
Advolution™ 2710
w/shelf charger
w/onboard charger
56422003
56422004
Specifications are subject to change without notice.
*Rubbermaid® and BRUTE® used with permission from Rubbermaid® commercial products.
Advolution™ 2710
A Rider Burnisher That Delivers Superior Gloss and Maximum Productivity.
Accessories and options:
• Seat Belt
• Dual Armrests
• Onboard Charger Kit
• Active Dust Control Kit
• Headlight Kit
• Battery Watering Kit
• Strobe Light
• Mobile Trash
Collector Kit
* for use with Rubbermaid®
BRUTE® 44 container; kit does
not include container
Smart cleaning.
Our products are designed using innovative technology that
increases productivity and drives down the cost to clean.
14600 21st Avenue North
Plymouth, MN 55447-3408
www.advance-us.com
Phone 800-850-5559
Fax 800-989-6566
240 Superior Boulevard
Mississauga, Ontario, Canada L5T 2L2
www.nilfisk-advance.com
Phone 800-668-8400
Fax 800-263-5111
Maintain peak performance with Nilfisk Genuine OEM Parts.
©2009 Nilfisk-Advance, Inc. Form L1898A 9-10-09
A Nilfisk-Advance Brand
www.advance-us.com
Loading...