Nikon L4 User Manual 2

The Nikon Guide to Digital Photography

with the

En

P

O

T

X

I

C

3

A

R

L

O

Z

K

K

I

N

6

.

3

-

1

O

O

M

9

.

4

-

8

8

.

.

9

2

:

m

1

m

Trademark Information

Macintosh, Mac OS, and QuickTime are registered trademarks of Apple Computer, Inc.
Microsoft and Windows are registered trademarks of Microsoft Corporation. The SD
logo is a trademark of the SD Card Association. Adobe and Acrobat are registered
trademarks of Adobe Systems Inc. PictBridge is a trademark. D-Lighting technology is
provided by Apical Limited. Face-priority AF technology is provided by Identix

®

. All
other trade names mentioned in this manual or the other documentation provided
with your Nikon product are trademarks or registered trademarks of their respective
holders.

Symbols and Conventions

To make it easier to find the information you
need, the following symbols and conven­tions are used:

This icon marks cautions, infor­mation that should be read
before use to prevent damage to
the camera.

Introduction

Basic Photography and
Playback

This icon marks notes, informa­tion that should be read before
using the camera.

This icon marks tips, additional
information that may be helpful
when using the camera.

This icon indicates that more
information is available elsewhere
in this manual or in the Quick
Start Guide.

Memory Cards

Pictures taken with this camera can be stored in
the camera’s internal memory or on removable
memory cards. If a memory card is inserted, all
new pictures will be stored on the memory card
and delete, playback, and format operations will
apply only to the pictures on the memory card.
The memory card must be removed before the
internal memory can be formatted or used to
store, delete, or view pictures.

Scene and Movie Modes

Movies

Viewing Pictures on the
Camera

Connecting to Televisions,
Computers, and Printers

Menus

Basic Camera Setup:
The Setup Menu

Shooting Options:
The Shooting Menu

Playback Options:
The Playback Menu

Technical Notes

i

For Your Safety

To prevent damage to your Nikon product or injury to yourself or to others,
read the following safety precautions in their entirety before using this equip­ment. Keep these safety instructions where all those who use the product will
read them.
The consequences that could result from failure to observe the precautions
listed in this section are indicated by the following symbol:

This icon marks warnings, information that should be read before using this
Nikon product to prevent possible injury.

WARNINGS

Turn off in the event of mal­function

Should you notice smoke or an unusual
smell coming from the camera or AC
adapter, unplug the AC adapter and
remove the batteries immediately, taking
care to avoid burns. Continued operation
could result in injury. After removing or
disconnecting the power source, take the
equipment to a Nikon-authorized service
representative for inspection.

Do not disassemble

Touching the product’s internal parts
could result in injury. Repairs should be
performed only by qualified technicians.
Should the camera break open as the
result of a fall or other accident, take the
product to a Nikon-authorized service
representative for inspection after
unplugging the product and/or removing
the batteries.

Do not use the camera or AC adapter in the presence of flammable gas

Do not use electronic equipment in the
presence of flammable gas, as this could
result in explosion or fire.

Handle the camera strap with care

Never place the strap around the neck of
an infant or child.

Keep out of reach of children

Particular care should be taken to prevent
infants from putting the batteries or
other small parts into their mouths.

Observe caution when han­dling batteries

Batteries may leak or explode if improp­erly handled. Observe the following pre­cautions when handling batteries for use
in this product:

• Before replacing the batteries, turn the

product off. If you are using an AC
adapter, be sure it is unplugged.

ii

• Use only the batteries listed on this

manual ( 7). Do not use other types.
Do not mix old and new batteries or
batteries of different makes or types.

• Charge and use each pair of Nikon

rechargeable Nikon EN-MH1 NiMH bat­teries together as a set. Do not mix bat­teries from different pairs.

• Insert batteries in the correct orienta-

tion.

• Do not short or disassemble batteries or

attempt to remove or break the cover­ing.

• Do not expose batteries to flame or to

excessive heat.

• Do not immerse in or expose to water.

• Do not transport or store with metal

objects such as necklaces or hairpins.

• Batteries are prone to leakage when

fully discharged. To avoid damage to
the product, be sure to remove the bat­teries when no charge remains.

• Discontinue use immediately should

you notice any change in the batteries,
such as discoloration or deformation.

• If liquid from damaged batteries comes

in contact with clothing or skin, rinse
immediately with plenty of water.

Observe the following pre­caution when handling the
battery charger

If an MH-71 battery charger is provided
with the camera, observe the following
precautions:

• Keep dry. Failure to observe this precau-

tion could result in fire or electric shock.

• Dust on or near the metal parts of the

plug should be removed with a dry
cloth. Continued use could result in fire.

• Do not handle the power cable or go

near the battery charger during thun­derstorms. Failure to observe this pre­caution could result in electric shock.

• Do not damage, modify, forcibly tug or

bend the power cable, place it under
heavy objects, or expose it to heat or
flame. Should the insulation be dam­aged and the wires become exposed,
take it to a Nikon-authorized service
representative for inspection. Failure to
observe these precautions could result
in fire or electric shock.

• Do not handle the plug or battery

charger with wet hands. Failure to
observe this precaution could result in
electric shock.

Use appropriate cables

When connecting cables to the input and
output jacks, use only the cables provided
or sold by Nikon for the purpose, to
maintain compliance with product regu­lations.

iii

Handle moving parts with care

Be careful that your fingers or other
objects are not pinched by the lens cover
or other moving parts.

CD-ROMs

The CD-ROMs supplied with this device
should not be played back on audio CD
equipment. Playing CD-ROMs on an
audio CD player could cause hearing loss
or damage the equipment.

Observe caution when oper­ating the flash

Using the flash close to your subject’s
eyes could cause temporary visual impair­ment. Particular care should be taken if
photographing infants, when the flash
should be no less than one meter (39in.)
from the subject.

Do not fire the flash while it is touching a person or object

Such use can result in the person being
burned, and/or their clothes igniting from
the heat of the flash.

Avoid contact with liquid crystal

Should the monitor break, care should be
taken to avoid injury due to broken glass
and to prevent liquid crystal from the
monitor touching the skin or entering the
eyes or mouth.

iv

Notices

• No part of the manuals included with

this product may be reproduced, trans­mitted, transcribed, stored in a retrieval
system, or translated into any language
in any form, by any means, without
Nikon’s prior written permission.

• Nikon reserves the right to change the

specifications of the hardware and soft­ware described in these manuals at any
time and without prior notice.

• Nikon will not be held liable for any

damages resulting from the use of this
product.

• While every effort has been made to

ensure that the information in these
manuals is accurate and complete, we
would appreciate it were you to bring
any errors or omissions to the attention
of the Nikon representative in your area
(address provided separately).

Notice for Customers in the U.S.A.

Federal Communications Commission
(FCC) Radio Frequency Interference
Statement

This equipment has been tested and
found to comply with the limits for a
Class B digital device, pursuant to Part 15
of the FCC rules. These limits are
designed to provide reasonable protec­tion against harmful interference in a res­idential installation. This equipment
generates, uses, and can radiate radio
frequency energy and, if not installed and
used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur
in a particular installation. If this equip-

ment does cause harmful interference to
radio or television reception, which can
be determined by turning the equipment
off and on, the user is encouraged to try
to correct the interference by one or
more of the following measures:

• Reorient or relocate the receiving

antenna.

• Increase the separation between the

equipment and receiver.

• Connect the equipment into an outlet

on a circuit different from that to which
the receiver is connected.

• Consult the dealer or an experienced

radio/ television technician for help.

COOLPIX L4

CAUTIONS

Modifications

The FCC requires the user to be notified
that any changes or modifications made
to this device that are not expressly
approved by Nikon Corporation may void
the user’s authority to operate the equip­ment.

Interface Cables

Use the interface cables sold or provided
by Nikon for your equipment. Using other
interface cables may exceed the limits of
Class B Part 15 of the FCC rules.

v

Notice for customers in the State of
California
WARNING: Handling the cord on this

product will expose you to lead, a chemi­cal known to the State of California to
cause birth defects or other reproductive
harm. Wash hands after handling.
Nikon Inc.,
1300 Walt Whitman Road, Melville, New
York
11747-3064, U.S.A. Tel.: [phone]

Notice for Customers in Can­ada

CAUTION

This class B digital apparatus meets all
requirements of the Canadian Interfer­ence Causing Equipment Regulations.

ATTENTION

Cet appareil numérique de la classe B
respecte toutes les exigences du Règle­ment sur le matériel brouilleur du Can­ada.

Symbol for Separate Collec­tion in European Countries

This symbol indicates that this
product is to be collected sepa­rately.
The following apply only to
users in European countries:

• This product is designated for separate

collection at an appropriate collection
point. Do not dispose of as household
waste.

• For more information, contact the

retailer or the local authorities in charge
of waste management.

vi

Notice Concerning Prohibi­tion of Copying or Reproduc­tion

Note that simply being in possession
of material that has been digitally
copied or reproduced by means of a
scanner, digital camera or other
device may be punishable by law.

• Items prohibited by law from being

copied or reproduced

Do not copy or reproduce paper
money, coins, securities, government
bonds, or local government bonds,
even if such copies or reproductions are
stamped “Sample.”
The copying or reproduction of paper
money, coins, or securities which are
circulated in a foreign country is prohib­ited.
Unless the prior permission of the gov­ernment has been obtained, the copy­ing or reproduction of unused postage
stamps or post cards issued by the gov­ernment is prohibited.
The copying or reproduction of stamps
issued by the government and of certi­fied documents stipulated by law is pro­hibited.

• Cautions on certain copies and

reproductions

The government has issued cautions on
copies or reproductions of securities
issued by private companies (shares,
bills, checks, gift certificates, etc.), com­muter passes, or coupon tickets, except
when a minimum of necessary copies
are to be provided for business use by a
company. Also, do not copy or repro­duce passports issued by the govern­ment, licenses issued by public agencies
and private groups, ID cards, and tick­ets, such as passes and meal coupons.

• Comply with copyright notices

The copying or reproduction of copy­righted creative works such as books,
music, paintings, woodcut prints, maps,
drawings, movies, and photographs is
governed by national and international
copyright laws. Do not use this product
for the purpose of making illegal copies
or to infringe copyright laws.

Disposing of Data Storage Devices

Please note that deleting images or
formatting data storage devices such
as memory cards or built-in camera
memory does not completely erase
the original image data. Deleted files
can sometimes be recovered from
discarded storage devices using com­mercially available software, poten­tially resulting in the malicious use of
personal image data. Ensuring the
privacy of such data is the user’s
responsibility.
Before discarding a data storage
device or transferring ownership to
another person, erase all data using
commercial deletion software, or
format the device and then com­pletely refill it with images contain­ing no private information (for
example, pictures of empty sky). Be
sure to also replace any pictures
selected for the welcome screen
( 57). Care should be taken to
avoid injury or damage to property
when physically destroying data stor­age devices.

vii

Table of Contents

For Your Safety ................................................................................................... ii

WARNINGS ...................................................................................................................... ii

Notices ............................................................................................................... v

Introduction .......................................................................................... 1

Parts of the Camera............................................................................................ 2

The Monitor ....................................................................................................... 4

Shooting .......................................................................................................................... 4

Playback ........................................................................................................................... 5

First Steps ........................................................................................................... 6

Inserting Batteries............................................................................................................. 6

Charge the batteries (EN-MH1 batteries only) ................................................................... 6

Insert the batteries ........................................................................................................... 7

Basic Setup....................................................................................................................... 9

Inserting Memory Cards ................................................................................................. 11

Basic Photography and Playback....................................................... 13

(Auto) Mode ............................................................................................... 13

Step1 Select (auto) mode ......................................................................................... 13

Step2 Turn the camera on .............................................................................................. 13

Step3 Frame a picture..................................................................................................... 14

Step4 Focus and shoot ................................................................................................... 15

Viewing Pictures ............................................................................................... 17

Deleting Unwanted Pictures............................................................................................ 17

Using the Flash ................................................................................................. 18

Taking Pictures with the Self-Timer ................................................................... 20

Macro Close-up Mode ...................................................................................... 22

Scene Mode......................................................................................... 23

Scene Mode ..................................................................................................... 23

Assist Modes .................................................................................................................. 24

Taking Pictures with Face-Priority AF............................................................................... 26

Other Scenes .................................................................................................................. 28

Movies ................................................................................................. 33

Movie Mode ..................................................................................................... 33

Movie Playback ................................................................................................. 34

Movie Options: The Movie Menu ...................................................................... 35

Movie Options............................................................................................................... 35

Auto-focus Mode .......................................................................................................... 36

Viewing Pictures on the Camera ....................................................... 37

Viewing Multiple Pictures: Thumbnail Playback ............................................................... 38

Deleting Pictures ............................................................................................................ 38

Taking a Closer Look: Playback Zoom ............................................................................. 39

Creating a Cropped Copy ............................................................................................... 39

Enhancing Contrast: D-Lighting ...................................................................................... 40

Connecting to Televisions, Computers, and Printers ....................... 41

Viewing Pictures on TV ..................................................................................... 41

viii

Viewing Pictures on a Computer ....................................................................... 42

Printing Pictures................................................................................................ 46

Connecting the Printer ................................................................................................... 47

Printing Pictures One at a Time ....................................................................................... 48

Printing Multiple Pictures ................................................................................................ 50

Creating a DPOF Print Order: Print Set ............................................................................ 52

Menus .................................................................................................. 53

Basic Camera Setup: The Setup Menu............................................................... 56

Menus........................................................................................................................... 57

Welcome Screen ........................................................................................................... 57

Date .............................................................................................................................. 57

Monitor Settings ........................................................................................................... 59

Date Imprint .................................................................................................................. 60

Sound Settings .............................................................................................................. 61

Blur Warning ................................................................................................................. 62

Auto Off ....................................................................................................................... 62

Format Memory/ Format Card ....................................................................................... 63

Language ...................................................................................................................... 63

Interface........................................................................................................................ 64

Reset All ........................................................................................................................ 64

Battery Type .................................................................................................................. 64

Firmware Version .......................................................................................................... 64

Shooting Options: The Shooting Menu ............................................................. 65

Image Mode.................................................................................................................. 65

White Balance ............................................................................................................... 66

Exposure Compensation ................................................................................................ 68

Continuous ................................................................................................................... 68

BSS ............................................................................................................................... 69

Color Options................................................................................................................ 70

Playback Options: The Playback Menu............................................................... 71

Print Set ........................................................................................................................ 71

Slide Show .................................................................................................................... 72

Delete ........................................................................................................................... 73

Protect .......................................................................................................................... 73

Transfer Marking ........................................................................................................... 73

Small Pic........................................................................................................................ 74

Copy ............................................................................................................................. 75

Technical Notes ................................................................................... 76

Optional Accessories......................................................................................... 76

Caring for the Camera ...................................................................................... 78

Cleaning ........................................................................................................................ 79

Storage .......................................................................................................................... 80

Error Messages ................................................................................................. 81

Troubleshooting ............................................................................................... 84

Appendix.......................................................................................................... 88

Specifications.................................................................................................... 95

Index ................................................................................................................ 98

ix

Use Only Nikon Brand Electronic Accessories

Nikon COOLPIX cameras are designed to the highest standards and include complex
electronic circuitry. Only Nikon brand electronic accessories (including battery chargers,
batteries, and AC adapters) certified by Nikon specifically for use with this Nikon digital
camera are engineered and proven to operate within the operational and safety
requirements of this electronic circuitry.

THE USE OF NON-NIKON ELECTRONIC ACCESSORIES COULD DAMAGE THE CAMERA

AND MAY VOID YOUR

For more information about Nikon brand accessories, contact a local autho­rized Nikon dealer.

x

NIKON WARRANTY.

Introduction

Thank you for your purchase of a Nikon COOLPIX L4 digital camera. This
manual has been written to help you enjoy taking pictures with your Nikon
digital camera. Read this manual thoroughly before use, and keep it where all
those who use the product will read it.
The documentation for this product also includes the manuals listed below.
Please be sure to read all instructions thoroughly to get the most from the
camera.

• Quick Start Guide: The Quick Start Guide takes you through the process of

unpacking and setting up your Nikon digital camera, taking your first pho­tographs, and transferring them to your computer.

• PictureProject Reference Manual (on CD): The PictureProject Reference

Manual contains information on using the PictureProject software provided
with your camera. For information on viewing the reference manual, see
the Quick Start Guide.

Illustrations and on-screen text in this manual and the Quick Start Guide may differ from the actual display.

Before Taking Important Pictures

Before taking pictures on important occasions (such as at weddings or before taking
the camera on a trip), take a test shot to ensure that the camera is functioning nor­mally. Nikon will not be held liable for damages or lost profits that may result from
product malfunction.

Life-Long Learning

As part of Nikon’s “Life-Long Learning” commitment to ongoing product support and
education, continually-updated information is available on-line at the following sites:

• For users in the U.S.A.: http://www.nikonusa.com/

• For users in Europe and Africa: http://www.europe-nikon.com/support

• For users in Asia, Oceania, and the Middle East: http://www.nikon-asia.com/

Visit these sites to keep up-to-date with the latest product information, tips, answers
to frequently-asked questions (FAQs), and general advice on digital imaging and pho­tography. Additional information may be available from the Nikon representative in
your area. See the URL below for contact information:

http://nikonimaging.com/

Introduction

1

Parts of the Camera

Introduction

Eyelet for
camera strap

Shutter-release button ( 16)

Power switch ( 9)

Power-on lamp ( 9)

Self-timer lamp
( 20)
Built-in flash
( 18)

Lens ( 14, 78)

Lens cover
closed

Power cord channel cover for
optional AC adapter ( 76)

Battery-chamber cover ( 6)

Attaching the Camera Strap

Attach the strap as shown below.

2

Lens cover

Battery chamber ( 6)

Replacing the connector cover

Monitor ( 4, 13, 17)

MENU button ( 53)

Connector cover
( 41, 42, 47)

Flash lamp
( 18)

Tripod socket

(playback) button

( 17, 37)

Mode selector
( 13, 23, 33)

(auto) mode ( 13)

Zoom button ( 14).

Introduction

See also:

• (thumbnail playback):

37

• (playback zoom): 39

• (help): 55

Multi selector ( 9)

Memory card slot cover
( 11)

(delete) button

( 17, 37, 38)

(scene) mode ( 23)

(movie)

mode ( 33)

The Multi Selector

Press the multi selector up, down, left, or right to highlight pictures and menu items, then press the center to select. The buttons on the multi selector are also used to:

: Display flash mode menu

: Display self-timer

menu ( 20)

: Display macro close-

up mode menu ( 22)

( 18)

: Perform D-lighting ( 40)

: Transfer picture ( 42)

3

The Monitor

9999

The following indicators may appear in the monitor during shooting and playback (actual display varies with current camera settings):

Shooting

Introduction

56

123 4

AUTO

7

20

19

18

+

17

16

1.0

1 Shooting mode ............13, 23, 33

2 Exposure lock ........................... 31

3 Macro close-up mode............... 22

4 Zoom indicator................... 14, 22

5 Focus indicator .........................15

6 Flash mode............................... 18

7 Camera shake icon................... 16

8 Internal memory/Memory card

indicator................................... 11

9 Battery level indicator ...............13

10 Sensitivity .................................16

11 “Date not set”/Time zone indica-

tor...................................... 57, 81

8

11

13

15

10

9999

9

10

12

14

12 Self-timer indicator .................. 20

13 Date imprint/Date counter ....... 60

14 Number of exposures

remaining .......................... 13, 91

Movie length ..................... 33, 91

15 Focus area ............................... 15

16 Image mode ............................ 65

17 Exposure compensation ........... 68

18 Color options........................... 70

19 White balance ......................... 66

20 Best Shot Selector (BSS)/Continu-

ous shooting mode............ 68, 69

4

Playback

12:00

15.05.2006

9999

9999

100NIKON

9999.JPG

START

15

15.05.2006

14

12:00

13
12
11

10

97

OK

1 Current folder ..........................92

2 File number and type................ 92

3 Internal memory/Memory card

indicator................................... 11

4 Battery level indicator ...............13

5 D-Lighting guide ......................40

6 Current frame number/Total

number of frames/

Movie length...................... 34, 37

1

2

3

4
5

6

:

START

100NIKON

9999.JPG

9999

8

OK

/

9999

7 D-Lighting icon ........................ 40

8 Movie playback indicator ......... 34

9 Image mode ............................ 65

10 Movie indicator........................ 34

11 Protect icon ............................. 73

12 Print-order icon........................ 50

13 Transfer icon...................... 43, 73

14 Time of recording ...................... 9

15 Date of recording ...................... 9

Introduction

5

First Steps

Inserting Batteries

The camera uses two AA batteries. Depending on the country or region of
purchase, the package will include either alkaline batteries or an MH-71 bat-

Introduction

tery charger with rechargeable EN-MH1 batteries.

Charge the batteries (EN-MH1 batteries only)

If the camera came with a battery charger and rechargeable Nikon EN-MH1
NiMH batteries, charge the batteries as described below. If the camera came
with a pair of alkaline batteries, skip to “Insert the batteries” on the follow­ing page.

Plug the charger in

1

Connect the power cable to the
charger (1) and then plug it into a
power outlet (2). The CHARGE lamp
will light (3).

Charge the batteries

2

Insert the batteries as indicated on
the charger. The CHARGE lamp will
start to blink. Charging is complete
when the CHARGE lamp stops
blinking.
A pair of new or fully exhausted
batteries will charge in about two
and a half hours.

6

3

2

1

Insert the batteries

Open the battery chamber.

1

Hold the camera upside down to prevent the
batteries from falling out.

Insert the batteries.

2

Insert the batteries as shown.

Close the battery chamber.

3

Is the Camera Off?

Confirm that the power-on lamp is off before removing batteries.

Batteries

Read and follow the warnings and cautions on pages ii–iii and 79 of this man­ual. The camera can be used with AA alkaline (LR6) batteries, Nikon rechargeable EN-

MH1 NiMH batteries, ZR6 oxyride batteries, and FR6/L91 lithium batteries. Do not mix
old and new batteries or batteries of different makes or types. Batteries with the fol­lowing defects cannot be used:

3

1

2

1

2

Introduction

Peeling or damaged
insulation

The Battery Type Menu

After replacing the batteries, check that the option selected for Battery Type in the
setup menu matches the type of battery used ( 64).

negative terminal

Flat negative terminalInsulation does not reach

7

Power saving modes and auto power off

This camera features a three-stage power saving function, which works as follows if no
operation is attempted for the times shown while the power is on.

• Approx. five seconds: The monitor brightness will be reduced to about 50% nor-

mal brightness.

• Approx. one minute (default setting): The monitor turns off and the camera

Introduction

enters standby mode. The power-on lamp blinks. The camera can be reactivated by
pressing the shutter-release button halfway. (The length of time before entering the
standby mode can be changed.)

• Approx. three minutes after the camera has entered standby mode: The cam-

era will turn off.

EN-MH1 Batteries

Charge EN-MH1 batteries before first use. Charge and use as a set: do not charge bat­teries one at a time or mix batteries from different pairs. Note that the batteries may
tend to discharge more quickly when new or after a long period of disuse. The batter­ies will retain a charge longer once they have been used and recharged several times.
“Memory” effects that result in reduced battery capacity can be avoided by periodi­cally refreshing the batteries as described in the Appendix ( 94).

8

Basic Setup

A language-selection dialog is displayed the first time the camera is turned on. Choose a language and set the time and date as described below.

The Multi Selector

The multi selector is used in the steps that follow. The buttons needed to perform a
task are shown in white; if more than one button is highlighted, any of the highlighted
buttons can be used. For example, “press the multi selector up or down” is shown as
illustrated below.

Press the multi selector up or
down.

Introduction

12

Cancel

OK

Confirm

Highlight the desired display lan­guage and press the center of the
multi selector.

MENU

Turn the camera on.

The language-selection screen is dis­played.

DATE

Set time and date?

No

Ye s

OK

Confirm

The confirmation screen is displayed.

9

34

Introduction

TIME ZONE

OK

London, Casablanca

DaylightSaving

OK

Confirm

HOME TIME ZONE

London, Casablanca

OK

MENU

Back

Confirm

Highlight Yes and press the cen­ter of the multi selector.

The TIME ZONE menu is displayed.*

Press the multi selector right.

The map of world time zones is dis­played.

* If daylight saving time is in effect, press

the multi selector down to highlight
“DaylightSaving” and press the center
of the multi selector.

56

Press the multi selector left or
right to select the home time
zone you are in and press the cen­ter of the multi selector.

DATE

D M Y

01

01 2006

00 : 00

Edit Day (order of Day, Month,
and Year may differ in some
areas) and press the multi selector
right.

DATE

D M Y

15

01 2006

00 : 00

The DATE screen is displayed.

10

78

DATE

D M Y

15

05 2006

00 : 00

DATE

D M Y

15

05 2006

15 : 10

OK

Confirm

Introduction

Edit Month and press the multi
selector right.

Repeat steps 6 and 7 to edit the
year, hour, and minutes, then
press the multi selector right.

DMY is highlighted.

9

77

Choose the order in which Day, Month, and Year will be displayed and
press the center of the multi selector.

The setting becomes effective, and the screen of the mode (selected by the
mode selector) is displayed.

Inserting Memory Cards

Pictures are stored in the camera’s internal memory (approximately 10MB) or on removable Secure Digital (SD) memory cards ( 76). Internal memory is used for recording and deleting pictures only if no memory card is inserted.

To insert a memory card:

Turn the camera off.

1

Confirm that the power-on lamp is off
before inserting or removing memory cards.

11

Introduction

Insert the memory card.

2

Open the memory card slot cover. Slide the
memory card in as shown until it clicks into
place. Close the memory card slot cover.

Turn the camera on.

3

If no message is displayed in the monitor, the
camera is ready for use.

If the message shown at right is displayed, the
memory card must be formatted before use.

CARD IS NOT FORMATTED

Note that formatting permanently deletes
all pictures and other data on the memory

card. Be sure to make copies of any pictures
you wish to keep before beginning formatting.

Format

OK

To begin formatting, press the multi selector up
to highlight Format and then press the center of the multi selector. Do

not turn the camera off or remove the batteries or memory card
until formatting is complete.

No

Confirm

Removing Memory Cards

Before removing memory cards, turn the camera off and confirm that the power-on
lamp is off. Open the memory card slot cover and press the card in to partially eject the
card. The card can then be removed by hand.

The Write Protect Switch

SD cards are equipped with a write protect
switch. Pictures cannot be recorded or deleted
and the memory card cannot be formatted when
this switch is in the “Lock” position.

Write Protect Switch

12

Basic Photography and Playback

(Auto) Mode

This section describes how to take pictures in (auto) mode, an automatic,
“point-and-shoot” mode recommended for first-time users of digital cam­eras.

Step1 Select (auto) mode

Slide the mode selector to .

1

Step2 Turn the camera on

Turn the camera on.

1

The power-on lamp will light and the monitor will
turn on. To turn the camera off at any time, press
the power switch again. Do not remove the bat­teries while the power-on lamp is lit.

Check indicators in the monitor.

2

Check the battery level and number of expo­sures remaining.

Display Battery level

NO ICON Batteries fully charged.

Low battery; ready spare batter­ies.

WARNING!!
BATTERY
EXHAUSTED

Batteries exhausted. Replace bat­teries.

Basic Photography and Playback

Battery Level

55

Number of exposures
remaining ( 91)

13

Step3 Frame a picture

Z

Ready the camera.

1

Hold the camera steadily in both
hands, keeping your fingers and
other objects away from the lens
and flash.

Basic Photography and Playback

Frame the picture.

2

Frame the subject near the center of
the monitor.

Zoom

Use the button to frame the subject in the monitor. Press to zoom out,
increasing the area visible in the frame. Press to zoom in up to 3× so that the sub­ject fills a larger area of the frame. Pressing for about two seconds at 3× zoom will
trigger digital zoom, allowing the subject to be magnified up to 4× more, for a total of
magnification of 12×. Note that unlike optical zoom, digital zoom does not increase
the amount of detail visible in the picture. Instead, details visible at 3× zoom are simply
enlarged, producing a slightly “grainy” image.

Zoom out Zoom in

oom indicator turns
yellow when digital
zoom is in effect.

55

14

555

Step4 Focus and shoot

Focus.

1

Press the shutter-release button halfway. The
camera will focus on the subject in the center
of the focus area ( 4). When the camera is
fully focused on the subject, the focus indicator
(AF●) lights up green. Blinking red indicates
that the camera was unable to focus. Change
the composition and try again.

Take the picture.

2

Press the shutter release button the rest of the
way down to take the picture. Note that the
flash may fire if the subject is poorly lit.

Basic Photography and Playback

55

During Recording

The or icon will blink while pictures are recorded. Removing memory cards or
batteries while these icons are blinking could affect pictures or damage the camera or
card.

15

The Shutter-Release Button –Focus Lock

To set focus and exposure, lightly press the shutter-release button about halfway, stop­ping when you feel resistance. Focus and exposure lock while the shutter-release but­ton is held in this position. To release the shutter and take a picture, press the shutter­release button down the rest of the way. Use a gentle touch; moving the camera while
pressing the shutter-release button can result in blurred pictures.

Basic Photography and Playback

55 55

Focus Check focus

indicator

Recompose
picture

55

Take picture

Auto-focus performs best when there is contrast between the subject and the back­ground and the subject is evenly lit. It does not perform well if the subject is very dark
or moving rapidly, if there are objects of sharply differing brightness in the scene (e.g.,
the sun is behind your subject and their features are in deep shadow), or if there are
several objects at different distances from the camera at the center of the frame (e.g.,
your subject is inside a cage).

When Lighting Is Poor

If lighting is poor and the flash is off, a icon will be dis­played to warn that pictures may be blurred as a result of the
slow shutter speeds. If an ISO icon is displayed, sensitivity has
been raised to compensate for poor lighting and pictures may
be affected by “noise” in the form of randomly-spaced,
brightly-colored dots. The camera may process pictures to
reduce noise, doubling recording times.
If the warning at right is displayed after a picture is taken, the
picture may be blurred. Select No to exit without recording
the picture.

PICTURE IS BLURRED.
SAVE PICTURE?

No

Ye s

OK

55

Confirm

16

Viewing Pictures

100NIKON

15 : 30

0005.JPG

10 . 10.2 0 06

Press the button to display a picture in
the monitor. Use the multi selector to
view additional pictures: press the multi
selector down or right to view pictures in
the order recorded, up or left to view pic­tures in reverse order. Keep the multi
selector pressed to scroll quickly to the
desired picture. Pictures may be displayed
briefly at low resolution while being read
from memory.
Press the button again to return to
shooting mode.

Deleting Unwanted Pictures

To delete the picture currently displayed
in the monitor, press the button. A con­firmation dialog will be displayed; high­light one of the following options and
press the center of the multi selector:

• No: Exit without deleting the picture.

• Yes: Delete the picture.

10.10.2006

10.10.2006
15:30

15:30

Erase 1 image (s)?

No

Ye s

100NIKON

100NIKON

0005.JPG

0005.JPG

OK

5/55/5

OK

Confirm

Basic Photography and Playback

17

Using the Flash

The flash has a range of 0.4–3 m (1 ft. 4 in.–9 ft. 10 in.) when the camera is
zoomed all the way out. The range at maximum zoom is 0.4–1.7 m (1 ft.
4 in.–5 ft. 7 in.). The following flash modes are available:

Mode Description

AUTO Auto Flash fires automatically when lighting is poor.

Basic Photography and Playback

Auto with red-

eye reduction

Off Flash will not fire even when lighting is poor.

Fill flash Flash fires whenever picture is taken. Use to “fill-in”

Slow sync Flash illuminates main subject; slow shutter speeds are

Reduces “red eye” in portraits ( 19).

(illuminate) shadows and back-lit subjects.

used to capture background at night or under dim light.

12

Flash

OK

:Confirm

66

Press the flash mode button. Highlight the desired mode and

press the center of the multi
selector.

The selected flash mode icon
appears at the top of the monitor. If

AUTO is selected, the icon extin­guishes automatically after five sec­onds. The selection made in
(auto) mode is stored in memory
even after the camera has been
turned off.

• The setting will be canceled if five sec-

onds pass without pressing the center

of the multi selector.

18

Red-eye Reduction

The camera uses advanced red-eye reduction. Low-intensity light pulses cause the sub­ject’s pupils to contract before the flash fires. If the camera still detects red-eye, it will
process the image to further reduce its effects (“In-Camera Red-eye Fix”; note that this
may slightly increase the time needed to record the picture). This mode is not recom­mended where a quick shutter response is required; if the desired results are not
achieved, try again at a different flash setting.

The Flash Lamp

The flash lamp shows flash status when the shutter­release button is pressed halfway.

• On: Flash will fire when picture is taken.

• Blinks: Flash charging. Wait a few seconds and try

again.

• Off: Flash will not fire when picture is taken.

Basic Photography and Playback

19

Taking Pictures with the Self-Timer

OFF

The camera is equipped with a ten-second timer for self-portraits. When
using the self-timer, mount the camera on a tripod (recommended) or rest it
on a flat, level surface.

12

Basic Photography and Playback

OFF

Self-timer

OFF

ON

OK

OFF

:Confirm

Press the self-timer button. Highlight ON and press the cen-

ter of the multi selector.

appears.

• The setting will be canceled if five sec-

onds pass without pressing the center

of the multi selector.

101010

34

66

101010

66

Frame the picture and press and
hold the shutter-release button
halfway.

The focus and exposure are adjusted.

20

99

66

Press the shutter-release button
fully.

The self-timer starts and the shutter
will be released automatically after
about ten seconds.

• Remaining seconds before the shutter is

released are displayed in the monitor.

• To stop the timer before a picture is

taken, press the shutter-release button

again.

The self-timer lamp will blink until one second
before the picture is taken, staying lit during the
final second to warn that the shutter is about to be
released.

Basic Photography and Playback

Auto Mode

In addition to the flash, self-timer, and macro close-up options described on pages 18–
22, (auto) mode offers a menu of shooting options controlling such settings as
image size, picture color, and white balance ( 65–70).

21

Macro Close-up Mode

OFF

Macro close-up mode is used for taking shots of objects as close as 4 cm
(1.6 in.).
Note that flash may be unable to light entire subject at distances of less than
40 cm (15.7 in.); if flash fires, play picture back and check results.

Basic Photography and Playback

12

Display options.

Press the button.

OFF

OFF

Macro close-up

OFF

ON

OK

:Confirm

Highlight ON and press the cen­ter of the multi selector.

appears.

34

66

Frame picture.

Minimum focus distance varies with
zoom position; if zoom is adjusted
until icon turns green, camera can
focus at distance of 4 cm (1.6 in.).

Focus and shoot.

In macro close-up mode, the camera
focuses continuously, even when the
shutter-release button is not pressed
halfway.

66

22

Scene Mode

Scene Mode

Scene mode offers a choice of eleven “scene”
and four “assist” settings. Camera settings are
automatically optimized for the selected sub­ject type.
Assist modes offer framing assist options to help compose shots:

Mode Description

Portrait For portraits.

Landscape For landscapes.

Sports For moving subjects.

Night Portrait For portraits taken against a backdrop of night scenery.

The remaining scene modes cover the following subject types:

Party/Indoor Night Landscape Copy

Beach/Snow Close Up Back Light

Sunset Museum Panorama Assist

Dusk/Dawn Fireworks Show

Scene Mode

Image Mode

Image mode ( 65) can be adjusted by selecting

from the scene mode menu.

Flash Mode, Self-Timer, and Macro Close-Up

See the Appendix for information on the settings available in scene mode ( 90).

SCN

MENU

IMAGE MODE

ExitOKConfirm?Help

23

Assist Modes

These modes offer a selection of framing assist options that allow you to
compose pictures with the help of framing guides displayed in the monitor.

12

Scene Mode

Select mode. Press the MENU button.

34

Highlight , , , or and
press the center of the multi
selector.

The framing assist menu is displayed.

FACE-PRIORITY AF

MENU

ExitOKConfirm?Help

Highlight the desired composi­tion type and press the center of
the multi selector.

The framing guide appears.

SCN

MENU

Assist modes

PORTRAIT

ExitOKConfirm?Help

5

66

666

Position the subject in the framing guide and take the picture.

24

Portrait Assist

Use for smooth, natural-looking portraits.

FACE-PRIOR­ITY AF

PORTRAIT Camera focuses on subject in center of monitor. No guides are

PORTRAIT LEFT Compose shot with subject in left or right half of frame. Cam-

PORTRAIT
RIGHT

PORTRAIT
CLOSE-UP

PORTRAIT
COUPLE

PORTRAIT FIG­URE

Camera automatically focuses on face of portrait subject
( 26).

displayed.

era focuses on subject in framing guide.

Compose shot with subject’s face in top half of frame. Camera
focuses on face area in framing guide.

Compose shot with two subjects side-by-side. Camera focuses
on subject in framing guide.

Compose shot in “tall” orientation. Camera focuses on subject
in framing guide.

Scene Mode

25

Taking Pictures with Face-Priority AF

12

Highlight and press center of
multi selector.

Scene Mode

icon blinks in monitor.

Frame picture using size of
icon as a guide.

Closest portrait subject is indicated
by double yellow border.*

* If camera detects multiple faces, clos-

est subject will be indicated by double
border, other subjects by single border.
Camera will focus on closest subject. If
camera can no longer detect subject
(for example, because subject has
looked away from camera), borders
will no longer be displayed and icon
will blink in monitor.

34

Set focus and exposure.
Double border turns green.

Take the picture.

26

Face-Priority AF

The camera’s ability to detect faces depends on a variety of factors, including whether
or not the subject is facing the camera.
The camera may be unable to detect faces that are hidden by sunglasses or other
obstructions or that take up too much or too little of the frame.
If no face is detected when the shutter-release button is pressed halfway, the camera
will focus on the center of the frame.
The camera will focus continuously until a face is detected.
If the double border flashes yellow when the shutter-release button is pressed halfway,
the camera is unable to focus; release the button and try again.

Landscape Assist

Use for vivid landscapes or portraits that fea­ture a landmark in the background. Pictures
taken at slow shutter speeds are processed to
reduce noise ( 16).

LANDSCAPE Camera focuses at infinity; no guides are displayed in monitor.*

SCENIC VIEW Use to photograph distant skylines. Camera focuses at infinity.*

ARCHITEC­TURE

GROUP RIGHT Compose shots with landmark to left or right of portrait sub-

GROUP LEFT

* Focus indicator ( 15) is always displayed in green when shutter-release button is

pressed halfway; note, however, that foreground objects may not always be in
focus.

Use to photograph buildings. Camera focuses at infinity.*

jects. Camera uses portrait subjects to set focus and exposure.

Sports Assist

Capture motion in a series of high-speed
shots. No framing guides are displayed.

Scene Mode

SPORTS Camera shoots about 1 frame per second (fps) while shutter-

release button is pressed (up to 3 shots). Camera focuses con­tinuously even when shutter-release button is not pressed.

27

SPORT COM­POSITE

Each time shutter-release button is
pressed, camera takes 16 shots in about
two seconds and arranges them in a single
picture 1600 × 1200 pixels in size. Camera
focuses continuously even when shutter­release button is not pressed.

Night Portrait Assist

Use for a natural balance between the main
subject and background lighting in portraits
shot at night. With the exception of face-pri­ority AF, this mode offers the same assist
options as portrait assist mode. Pictures taken

Scene Mode

at slow shutter speeds are processed to
reduce noise ( 16); to prevent blurring,
mount the camera on a tripod or rest it on a flat, stable surface.

Other Scenes

To take pictures in other scene modes:

12

SCN

MENU

BEACH/SNOW

ExitOKConfirm?Help

Scene modes

Select mode. Press the MENU button.

34

66

Make selection. Frame the picture and take the

picture.

28

66

The following modes are available:

PARTY/INDOOR

Captures the effects of candlelight and other indoor
background lighting. Camera focuses on subject in cen­ter of frame. Hold camera steady to prevent blurring.

BEACH/SNOW

Captures the brightness of such subjects as snowfields,
beaches, or sunlit expanses of water. Camera focuses on
subject in center of frame.

SUNSET

Preserves the deep hues seen in sunsets and sunrises.
Camera focuses at infinity.* Hold camera steady to pre­vent blurring.

DUSK/DAWN

Preserves the colors seen in the weak natural light before
sunrise or after sunset. Camera focuses at infinity.* Use
of a tripod recommended to prevent blurring; pictures
may be processed to reduce noise ( 16).

Scene Mode

NIGHT LANDSCAPE

Slow shutter speeds are used to produce stunning night
landscapes. Camera focuses at infinity.* Use of a tripod
recommended to prevent blurring; pictures may be pro­cessed to reduce noise ( 16).

CLOSE UP

Photograph flowers, insects, and other small objects at
close range ( 22). Camera focuses continuously until
shutter-release button is pressed halfway to lock focus.
Hold camera steady to prevent blurring.

29

MUSEUM

Use indoors where flash photography is prohibited (for
example, in museums and art galleries) or in other set­tings in which you do not want to use the flash. Camera
focuses on subject in center of frame; BSS ( 69) turns
on automatically. Hold camera steady to prevent blur­ring.

FIREWORKS SHOW

Slow shutter speeds are used to capture the expanding
burst of light from a firework. Focus is fixed at infinity.*
Use of a tripod recommended to prevent blurring.

Scene Mode

COPY

Provides clear pictures of text or drawings on a white
board or in print. Camera focuses on subject in center of
frame; use macro close-up ( 22) to focus at short
ranges. Colored text and drawings may not show up
well.

BACK LIGHT

Use when light is coming from behind a portrait subject,
throwing their features into shadow. The flash fires auto­matically to “fill in” (illuminate) shadows. Camera
focuses on subject in center of frame.

PANORAMA ASSIST

Use when taking a series of pictures that will later be joined side-by-side in
PictureProject to form a panorama ( 31).

* Focus indicator ( 15) is always displayed in green when shutter-release button is

pressed halfway; note, however, that foreground objects may not always be in
focus.

30

Taking Pictures for a Panorama ( 30)

The camera focuses on the subject in the center of the frame. Use a tripod
for better results.

12

55

Highlight (Panorama assist)
and press the center of the multi
selector.

Highlight the desired pan direc­tion and press the center of the
multi selector.

The arrow showing the selected
direction turns white.

• The direction can be re-selected by

pressing the center of the multi selector

again.

• If the first shot is taken without decid-

ing the pan direction, it will be auto-

matically set for the right.

55

34

444

Take the first picture.

The first picture is displayed in about
1/3 of the monitor. AE-L icon is dis­played to show that white balance
and exposure have been locked at
values for first shot.

Compose the next shot to overlap
with the previous picture and
take the second picture.

Repeat until the entire series of pic­tures has been taken.

444

Scene Mode

31

5

2

2

End series.

The monitor returns to the screen in step 1.

Scene Mode

Panorama Assist

Flash mode ( 18), self-timer ( 20) and macro close-up ( 22) cannot be adjusted
after the first picture is taken. Pictures cannot be deleted, or zoom or image mode
( 65) cannot be adjusted until shooting is complete.

32

Movies

0h 1m 0 s

0h 0m45s

0h 0m30s

Movie Mode

Follow the steps below to shoot movies. Movies recorded to internal memory
at the default setting of Small Size 320 can be up to 1 minute long; a
256MB memory card can hold up to 26 minutes 33 seconds.

Select mode.

1

Exposure count display shows
maximum total length of movie
that can be recorded.

0h 1m 0s

0h 1m 0s

Start recording.

2

Progress bar shows amount of
memory remaining.

0h 0m45s

0h 0m45s

End recording.

3

The monitor returns to the screen
in step 1.

Movies

0h 0m30s

0h 0m30s

See “Movie Options: The Movie Menu” ( 35) for information on movie size
and focus options.

Recording Movies

The flash ( 18) and self-timer ( 20) are not available in movie mode. Macro close­up can be used ( 22). Optical zoom cannot be adjusted during recording.
See the Appendix for information on the maximum total length of movie that can be
recorded ( 91).

33

Movie Playback

100NIKON

15 : 30

0001.

MOV

START

10 . 10.2 0 06

0h 0 m9s

0h 0m45s

In full-frame playback ( 37), movies
( 33) are indicated by a icon.

To play a movie, display it in full-frame
playback and press the center of the
multi selector. Playback controls appear
at the top of the display; press the multi
selector left or right to highlight a con­trol, then press the center of the multi
selector to perform the selected opera-

Movies

tion.

Control Description

Rewind movie while center of multi selector is pressed.

Advance movie while center of multi selector is pressed.

Playback pause.

Advance paused movie one frame.

Rewind paused movie one frame.

Resume playback.

End movie and return to full-frame playback.

10.10.2006

10.10.2006

15:30

15:30

OK

START

START

100NIKON

100NIKON

0001.

MOV

0001.

MOV

0h0m9s

0h0m9s

0h 0m45s

0h 0m45s

34

Movie Options: The Movie Menu

The movie menu contains the options shown below.

To display the movie menu:

MOVIE

SET-UP
Movie options
Auto-focus mode

Select mode. Press MENU button.

Movie Options

Movies can be recorded at the following sizes:

Option Size (pixels) Frames per

second

TV movie 640 640 × 480 15

Small size 320 320 × 240 15

Smaller size 160 160 × 120 15

MENU

ExitOKConfirm?Help

MOVIE OPTIONS

TV movie 640

Small size 320

Smaller size 160

MENU OK

ConfirmExit

Movies

35

Auto-focus Mode

Choose how the camera focuses in movie mode.

Option Description

Single AF Camera focuses when shutter-release

button is pressed halfway and locks at
this position during shooting.

Full-time AFCamera constantly adjusts focus, even

when shutter-release button is not
pressed.

Movies

AUTO-FOCUS MODE

Single AF

Full-time AF

MENU OK

ConfirmExit

Movies

See the Appendix for information on movie menu defaults ( 88) and on the maxi­mum total length of movie that can be recorded at different settings ( 91).

36

Viewing Pictures on the Camera

100NIKON

15 : 30

0005.JPG

10 . 10.2 0 06

To view pictures full-frame in the monitor (full­frame playback), press the button (if the cam-

10.10.2006

10.10.2006
15:30

15:30

era is off, pressing the button for about one
second will turn the camera on in playback mode).
The following operations can be performed:

To Press To Press

View next picture 17 View playback

MENU 71

menu

View previous
picture

17 Still: Enhance

contrast

Delete picture 17 Movie: Play

Zoom picture in ( ) 39

movie

View thumbnails ( ) 38 Exit to shooting

mode

100NIKON

100NIKON

0005.JPG

0005.JPG

OK

5/55/5

40

34

—

Viewing Pictures on the Camera

37

Viewing Multiple Pictures: Thumbnail Playback

Pressing the ( ) button in full-frame playback
displays pictures in “contact sheets” of four or
nine thumbnail images. The following operations
can be performed while thumbnails are displayed:

To Press To Press

Highlight picture—Delete high-

Change number
of pictures dis­played

Viewing Pictures on the Camera

Deleting Pictures

()/
()

—

Pressing the button in full-frame or thumb­nail playback displays the dialog shown at
right. Highlight Yes and press the center of the
multi selector to delete the selected picture.

lighted picture

Exit to full-frame
playback

View playback
menu

Exit to shooting
mode

MENU 71

Erase 1 image (s)?

Ye s

—

—

—

OK

No

Confirm

Viewing Pictures in Internal Memory

Pictures in internal memory can only be viewed if no memory card is inserted.

38

Taking a Closer Look: Playback Zoom

SCROLL

ZOOM

During full-frame playback ( 37), the ( )
button can be used to zoom in on pictures to a
maximum of 10×. The following operations can
be performed while pictures are zoomed in:

:

:

SCROLL

SCROLL:ZOOM

:

ZOOM

To Press

Zoom in ( ) —

Zoom out ( ) —

View other areas of picture —

Delete picture 37

View playback menu MENU 71

Exit to full-frame playback 37

Create cropped copy (see below) Shutter-release button —

Exit to shooting mode —

Creating a Cropped Copy

If a icon is displayed in the monitor during
playback zoom, the portion of the picture cur­rently visible in the monitor can be saved to a
separate file. Pressing the shutter-release but­ton displays the dialog shown at right; high­light Yes and press the center of the multi
selector to create a new picture containing only
the area visible in the monitor.

• Depending on the size of the original and the zoom ratio at the time the copy was

created, copies will be 2272 × 1704, 2048 × 1536, 1600 × 1200,
1280 × 860, 1024 × 768, 640 × 480, 320 × 240, or 160 × 120 pixels in
size.

• Cropped pictures are stored in JPEG format (compression ratio 1:8) as separate pic-

tures from the original pictures.

Cropped Copies

Cropped copies may not display or transfer correctly when viewed on other models of
Nikon camera. See the Appendix for more information on cropped copies ( 92).

Save this image
as displayed?

OK

No

Ye s

Confirm

39

Viewing Pictures on the Camera

Enhancing Contrast: D-Lighting

100NIKON

15 : 30

0005.JPG

10 . 10.2 0 06

100NIKON

15 : 30

0005.JPG

10 . 10.2 0 06

100NIKON

15 : 30

0005.JPG

10 . 10.2 0 06

If a icon appears on a picture during full­frame playback ( 37), D-lighting can be used

10.10.2006

10.10.2006
15:30

15:30

to create a copy with enhanced brightness and
contrast, brightening dark and backlit subjects.

10.10.2006

12

D-Lighting

OK

OK

Cancel

Confirm

10.10.2006

15:30

15:30

Confirmation dialog is displayed. Highlight OK and press the center

Viewing Pictures on the Camera

of the multi selector.

The enhanced brightness copy is
made.

100NIKON

100NIKON

0005.JPG

0005.JPG

OK

/

/

5

5

100NIKON

100NIKON

0005.JPG

0005.JPG

/

/

5

5

5

5

5

5

During playback, copies created with D-lighting
are indicated by a icon.

10.10.2006

10.10.2006

15:30

15:30

D-Lighting

Copies created with D-lighting may not display or transfer correctly when viewed on
other models of Nikon camera. See the Appendix for more information on D-lighting
copies ( 92).

40

100NIKON

100NIKON

0005.JPG

0005.JPG

/

/

5

5

5

5

Connecting to Televisions, Computers, and Printers

In addition to viewing pictures on the camera, you can also:

• View pictures on TV and record movies to video (see below)

• Copy pictures to a computer for storage and editing ( 42)

• Print pictures on a home printer ( 46) or order prints from photofinisher

Before connecting the camera to another device, it may be necessary to
change the Interface settings in the setup menu ( 64). See “Menus”
( 53) for more information. To prevent the camera from turning off unex­pectedly during connection, use fresh batteries or an optional EH-65A AC
adapter kit.

Viewing Pictures on TV

The Interface>Video mode item in

1

the setup menu offers a choice of
NTSC and PAL standards for analog
video output ( 64). Select a standard
to match the television.

Turn the camera off and con-

2

nect the video cable.

Connect the black plug to the
camera, the yellow plug to the
video-in jack on the TV.

Tune the television to the video channel.

3

For details, consult the documentation for the TV.

Press the button for about one second to

4

turn the camera on.

The camera monitor will remain off and the television
will show the image normally shown in the monitor.

VIDEO MODE

NTSC

PA L

MENU OK

ConfirmExit

Connecting to Televisions, Computers, and Printers

41

Viewing Pictures on a Computer

Before pictures can be transferred (copied) to a computer, PictureProject
must be installed. For more information on installing and using Picture­Project, see reference CD and Quick Start Guide. To transfer pictures to a
computer:

Start a computer to which PictureProject has been installed.

1

Choose an Interface>USB option as

2

described in “Choosing a USB Option
for Connection to a Computer”
(44).

Turn the camera off and connect

3

the USB cable as shown at right.

Connecting to Televisions, Computers, and Printers

Turn the camera on.

4

Press the center of the multi selector

5

to copy all marked pictures to the
computer.

USB

PTP

Mass storage

MENU OK

ConfirmExit

42

The following messages will be displayed:

100NIKON

15 : 30

0005.JPG

10 . 10.2 0 06

PREPARING TO TRANSFER

TRANSFERRING IMAGES TO
COMPUTER

The pictures will be displayed in PictureProject when transfer is com­plete.

Disconnect the camera as described in “Disconnecting the Cam-

6

era” ( 45).

Marking Pictures for Transfer

Pictures marked for transfer are shown by a icon
during playback. By default, all pictures are automati­cally marked for transfer. Two options control transfer
marking:

• Interface>Auto transfer (setup menu): Choose On

to mark all new pictures for transfer ( 64).

• Transfer marking (playback menu): Change mark-

ing for existing pictures ( 73).

The PictureProject Transfer Button

To copy both marked and unmarked pictures to the
computer, click the PictureProject Transfer button
instead of pressing the center of the multi selector in
Step 5.

TRANSFER COMPLETED

100NIKON

10.10.2006

10.10.2006
15:30

15:30

100NIKON

0005.JPG

0005.JPG

OK

4/5/5

4

Transfer Cancel

Connecting to Televisions, Computers, and Printers

43

Choosing a USB Option for Connection to a Computer

Consult the following table when choosing a USB option for connection to a computer
( 42). The default option is Mass Storage. For more information on menu opera­tions, see “Menus” ( 53).

Computer operating system Pictures transferred using:

Windows XP Home Edition

Camera
(Transfer )
button*

1

Choose Mass storage.*

PictureProject
button

2

Windows XP Professional
Windows 2000 Professional
Windows Millennium Edition (Me)
Windows 98 Second Edition (SE)

Mac OS X 10.1.5 or later Choose PTP. Choose Mass storage or

PTP.

1

*

The camera (Transfer ) cannot be used to transfer images in the following
cases. Use the Transfer button in PictureProject.

• When transferring images from the camera memory and Mass storage is selected

for the USB option.

• When the memory card write-protect switch is in the “Lock” position. Unlock by

sliding the switch to the “write” position before transferring images.

Connecting to Televisions, Computers, and Printers

2

*

Do not select PTP. If PTP is selected when the camera is connected, wait until the
Windows hardware wizard is displayed, then click Cancel and disconnect the cam­era. Select Mass storage in the camera USB menu before reconnecting the camera.

44

Disconnecting the Camera

If PTP is selected for USB, turn the camera off and disconnect the USB cable.
If Mass Storage is selected for USB, remove the camera from the system as described
below before turning the camera off and disconnecting the USB cable.

• Windows XP Home Edition/Windows XP Professional:

Click the “Safely Remove Hardware” icon ( ) in the
taskbar and select Safely remove USB Mass Storage
Device from the menu that appears.

• Windows 2000 Professional:

Click the “Unplug or Eject Hardware” icon ( ) in the
taskbar and select Stop USB Mass Storage Device
from the menu that appears.

• Windows Millennium Edition (Me):

Click the “Unplug or Eject Hardware” icon ( ) in the
taskbar and select Stop USB Disk from the menu that
appears.

• Windows 98 Second Edition (SE):

In My Computer, right click on the removable disk cor­responding to the camera and select Eject from the
menu that appears.

• Macintosh:

Drag the untitled camera volume (“NO NAME”) into the Trash.

Connecting to Televisions, Computers, and Printers

45

Printing Pictures

Users of PictBridge-compatible printers can connect the camera directly to
the printer and print pictures without using a computer.

Take photographs

Use Print set to select
pictures for printing
(52)

Connect printer ( 47)

Print pictures one at a
time ( 48)

Print multiple pictures
(50)

Print current print
order (DPOF printing;

50)

Disconnect USB cable

Connecting to Televisions, Computers, and Printers

Other Ways to Print Pictures

Pictures can also be printed by:

• Inserting a memory card in the printer: If the printer is equipped with a card slot,

a memory card can be inserted in the printer and pictures printed directly from the
card. If the printer supports DPOF, the camera Print set option can be used to select
pictures for printing ( 52). See the printer manual for details.

• Taking memory cards to a digital print service: If the service supports DPOF, the

camera Print set option can be used to select pictures for printing ( 52).

• Transferring pictures to a computer: Once transferred to a computer ( 42), pic-

tures can be printed using imaging software. See the application and printer manuals
for details.

46

Printing the Date of Recording on Pictures

Two options are available for printing the date of recording on pictures: Date imprint
( 60) and Print set>Date (52).

Date imprint Print set>Date

Must be set before picture is taken Set after picture is taken

Date permanently imprinted on picture Date stored separately

Date appears whenever picture is printed Date only appears when picture is printed

on DPOF-compatible printer

The date only appears once; Print set>Date cannot be used to print two dates on pic­tures with a date imprint.

Connecting the Printer

Turn the printer on.

1

Set the Interface>USB option in the

2

setup menu to PTP (64).

See “Menus” ( 53) for more informa­tion on menu operations.

Turn the camera off and connect

3

the USB cable as shown at right.

USB

PTP

Mass storage

MENU OK

Connecting to Televisions, Computers, and Printers

ConfirmExit

47

Turn the camera on.

4

A PictBridge start-up screen will be displayed.
The camera will then enter full-frame playback
with the PictBridge logo displayed in the monitor.

PictBridge

Printing Pictures One at a Time

OK

4/4/55

4/

::

12

::

Connecting to Televisions, Computers, and Printers

Select a desired picture.

* To choose picture from thumbnail list,

press ( ) and use multi selector to
highlight desired picture, or press
( ) to exit to full-frame playback.

1 2 3

123

4 5

45

MENU OK

Start printBack

OK

4/4/55

4/

Display print options.

PRINT MENU

Start print

Copies
Paper size

OK

Confirm

48

Press multi selector up or down to highlight option, press center

3

to select:

Option Description

Start print Start printing. To cancel before all copies have been printed,

press center of multi selector. Camera returns to PictBridge
playback display when printing is complete; repeat from Step
1 to print additional pictures.

Copies Press multi selector up or down to

choose number of copies (up to 9).

COPIES

Press center of multi selector to
return to previous menu.

OK

Paper size Press multi selector up or down to

highlight desired paper size. Press
center of multi selector to return
to previous menu.

PAPER SIZE

Default

3.5" × 5"
5" × 7"

Postcard

100mm × 150mm

OK

8

Confirm

1/2

Confirm

Connecting to Televisions, Computers, and Printers

Paper Size

The camera supports the following paper sizes: Default (the default paper size for the
current printer), 3.5"x5", 5"x7", Postcard, 100mmx150mm, 4"x6", 8"x10", Letter,
A3, and A4. Only sizes supported by the current printer will be displayed.

49

Printing Multiple Pictures

To print multiple pictures, press the MENU button
while the PictBridge playback screen is displayed
( 47). The menu shown at right will be displayed;
press the multi selector up or down to highlight an
option, then press the center to select.

Option Description

Print selection Print selected pictures (see below).

Print all images Print one copy of all images.

DPOF printing Press multi selector up or down to

highlight option, press center to
select:

• Start print: Print current print

order ( 52).

• Confirm: View print order. Press

center of multi selector to start
printing, or press MENU to exit.

• Cancel: Exit without printing.

Paper size Choose page size ( 49).

Connecting to Televisions, Computers, and Printers

Printing Selected Pictures

Choosing Print selection displays the menu shown in Step 1.

PictBridge

Print selection

Print all images
DPOF printing
Paper size

Cancel
OK

Confirm

DPOF PRINTING

005 prints
Start print

Confirm

Cancel
OK

Confirm

12

Scroll through pictures.

Current picture shown at center of
display.

PRINT SELECTION

10. 10. 2006
12 : 00

MENU OK

ConfirmBack

+

--

[ 4/ 5]

Select current picture and set
number of prints to 1.

Selected pictures marked by icon.

PRINT SELECTION

10. 10. 2006
12 : 00

MENU OK

ConfirmBack

11

[ 4/ 5]

+

--

50

34

PRINT SELECTION

10. 10. 2006
12 : 00

MENU OK

ConfirmBack

33

[ 4/ 5]

+

--

005 PRINTS

1 2 3

123

4 5

45

MENU OK

Start printBack

Choose number of prints (up to

9).

To deselect picture, press multi selec-

Confirm selection (to return to
step 1 and change selection, press
MENU button).

tor down when number of prints is

1. Repeat steps 1–2 to select addi­tional pictures.

5

OK

Printing

001/003

Cancel

Start printing.

PictBridge menu is displayed when printing is complete.*

* Press center of multi selector again to cancel before printing is complete.

Connecting to Televisions, Computers, and Printers

51

Creating a DPOF Print Order: Print Set

The Print set option in the playback menu ( 71) is used to create digital
“print orders” for printing on DPOF-compatible devices ( 90). Selecting
Print set displays the menu shown in Step 1.

12

PRINT SET

Print selected

Delete print set

MENU OK

ConfirmExit

PRINT SELECTION

10. 10. 2006
12 : 00

MENU OK

ConfirmBack

[ 4/ 5]

Highlight Print selected. Display selection dialog.

* To delete current print order, highlight

Delete print set and press center of
multi selector.

Select pictures as described in Steps 1–4 of “Printing Selected Pic-

3

tures” ( 50).

Connecting to Televisions, Computers, and Printers

4

PRINT SELECTION

Done

Date
Info

OK

MENU

Exit

Confirm

Press multi selector up or down to highlight option, press center to
select.

• Date: Print date of recording on all pictures in print order.

• Info: Print shutter speed and aperture on all pictures in print order.

• Done: Complete print order and exit.

+

--

Print Set

Date and Info are reset each time the menu shown Step 4 is displayed. Info is not
printed when the camera is connected directly to the printer.

52

Menus

Menus are available for shooting, playback, movies, and camera setup. Press
the MENU button to display the menus; press again to return to shooting or
playback.

To display the shooting menu:

1/2

1/2

Select mode. Press MENU button.

To display the playback menu:

Display picture full
frame ( 37).

Press MENU button.

To display the movie menu:

SHOOTING MENU

SET-UP
Image mode
White balance
Exp. +/­Continuous

MENU

OK

Exit

PLAYBACK MENU

SET-UP
Print set
Slide show
Delete
Protect

MENU

OK

Exit

MOVIE

SET-UP
Movie options
Auto-focus mode

Confirm?Help

Confirm?Help

Menus

Select mode. Press MENU button.

To display the setup menu:

SHOOTING MENU

SET-UP
Image mode
White balance
Exp. +/­Continuous

MENU

OK

Exit

Confirm?Help

Display scene ( 23),
shooting, playback,
or movie menu.

1/2

SHOOTING MENU

SET-UP
Image mode
White balance
Exp. +/­Continuous

MENU

OK

Exit

Confirm?Help

Highlight SET-UP and
press center of multi
selector.

1/2

MENU

ExitOKConfirm?Help

SET-UP

Shooting menu
Menus
Welcome screen
Date
Monitor settings

MENU

OK

Exit

Confirm?Help

1/3

--

--

--

53

Use the multi selector to navigate the menus:

Move cursor up

Make selection

Move cursor left Move cursor right

Move cursor down

Default Settings

See the Appendix for information on menu defaults ( 88).

To make a selection from a menu:

12

Highlight menu item. Display options and highlight a

Menus

SHOOTING MENU

SET-UP
Image mode
White balance
Exp. +/­Continuous

MENU

OK

Exit

Confirm?Help

1/2

CONTINUOUS

Single

Multi-shot 16

MENU OK

ConfirmExit

desired option.

3

SHOOTING MENU

SET-UP
Image mode
White balance
Exp. +/­Continuous

MENU

OK

Exit

Confirm?Help

1/2

Select the highlighted option.

54

To select multiple pictures in the Print set ( 52), Erase selected images
(73), Protect ( 73), Transfer marking>Select image(s) ( 73), or
Copy>Selected images ( 75) menus:

12

Scroll through pictures and select
a desired picture.

The current picture is shown at the
center of the monitor.
E.g. To protect a picture

PROTECT

10. 10. 2006
12 : 00

MENU OK

[ 4/ 5]

ConfirmExit

ON
OFF

Set ON/OFF (or the number of
copies).

When ON is set, the icon according
to the function being performed
appears in the center of the current

PROTECT

10. 10. 2006
12 : 00

MENU OK

[ 4/ 5]

ConfirmExit

ON
OFF

picture.
Repeat steps 1 and 2 to select addi­tional pictures.

3

Done

Complete operation.

The setting becomes effective.

Menus

Help

For help on the highlighted item, press the ( )
button. Press to display the options for the high­lighted item, ( ) to exit, or MENU to return to
shooting or playback.

55

Basic Camera Setup: The Setup Menu

The setup menu contains the following
options:

Option Description

Menus Choose how menus are displayed. 57

Basic Camera Setup: The Setup Menu

Welcome screen Select screen displayed when camera is turned

on.

Date Set clock and choose home and destination time

zones.

Monitor settings Adjust monitor brightness and choose display

style.

Date imprint Imprint date or birthday counter on pictures. 60

Sound settings Adjust sound and volume settings. 61

Blur warning Turn blur warning on or off. 62

Auto off Choose when monitor will turn off to save

power.

Format memory/

Format internal memory or memory card. 63

Format card

Language Choose language for camera menus and mes-

sages.

Interface Adjust settings for connection to television or

computer.

Reset all Restore camera settings to default values. 64

Battery Type Choose type of battery inserted in camera. 64

Firmware version Display camera firmware version. 64

SET-UP

Shooting menu
Menus
Welcome screen
Date
Monitor settings

MENU

OK

Exit

1/3

--

--

--

Confirm?Help

57

57

59

62

63

64

Default Settings

See the Appendix for information on setup menu defaults ( 88).

56

Menus

Choose how menus are displayed.

SET-UP

Shooting menu
Menus
Welcome screen
Date
Monitor settings

MENU

OK

Exit

Confirm?Help

1/3

--

--

--

Text Icon

WELCOME IMAGE SELECT

MENU

ExitOKConfirm?Help

Welcome Screen

Choose the welcome screen displayed when the
camera is turned on. To select a picture from internal
memory or the memory card to use as a welcome
screen, choose Select an image (the image used in
the welcome screen is a copy of the selected image
and does not change when the original is deleted or
the memory card is removed).

Date

Set the camera clock and choose home and travel
destination time zones.

Option Description

Date Set camera clock to current date and

time ( 9).

Time zone Choose home ( ) or travel destination

( ) time zone ( 93); turn daylight
saving time on or off.

MENUS

Tex t

Icons

MENU OK

COOLPIX

MENU OK

Date

Time zone

MENU OK

ConfirmExit

WELCOME IMAGE SELECT

Disable welcome

Nikon

Animation

Select an image

ConfirmBack

DATE

10.10.2006 15:30

ConfirmExit

Basic Camera Setup: The Setup Menu

--

57

To switch between home ( ) and travel destination ( ) time zones:

To switch between home ( ) and
travel destination ( ) time zones:
Highlight or and press the cen­ter of the multi selector.

The clock is set to the time in the selected
time zone. The current selection is indi-

TIME ZONE

10.10.2006 15:30

London, Casablanca

DaylightSaving

OK

London, Casablanca

DaylightSaving

MENU

OK

Exit

Confirm

cated by a dot.

* To change the home or travel destination time zone, highlight or , then press

the multi selector right. Choose a time zone and daylight saving time as described in

Basic Camera Setup: The Setup Menu

“Basic Setup” ( 9).

The Clock Battery

The clock battery charges when the main battery is installed or an AC adapter is con­nected, and can provide several days of backup power after about 10 hours of charg­ing.

58

Monitor Settings

100NIKON

15 : 30

0005.JPG

10 . 10.2 0 06

5

The following options are available:

Option Description

Photo info Choose information displayed in moni-

tor.

Brightness Choose from five settings for monitor

brightness.

Photo Info

The following display options are available:

Option Description

Show info Indicators are dis-

played in monitor
(4).

Hide info Indicators are not

displayed in moni­tor.

Shooting mode Playback mode

MENU OK

Display

10.10.2006

10.10.2006
15:30

15:30

55

Photo info

Brightness

MONITOR SETTINGS

ConfirmExit

100NIKON

100NIKON

0005.JPG

0005.JPG

OK

/55/

5

-­3

Basic Camera Setup: The Setup Menu

5

59

Date Imprint

Imprint date information on pictures as they are
taken.

Option Description

Off Time and date do not appear on pic-

tures.

Date Date or date and time are imprinted

Date and
time

Date counter Time stamp shows number of days

Basic Camera Setup: The Setup Menu

At settings other than Off, the option selected is
indicated by an icon in the monitor during shoot­ing.

on pictures taken while this option is
in effect.

between date of shooting and
selected date (see below).

DATE IMPRINT

Off

Date
Date and time
Date counter

MENU OK

ConfirmExit

Date Counter

66

Pictures taken while this option is in effect are
imprinted with the number of days remaining until or the number of days
elapsed since a specified date. Use it to track the growth of a child or count
down the days until a birthday or wedding.

DATE COUNTER

9

2006.10.19

Number of days

MENU OK

ConfirmExit

Stored dates Up to three dates can be stored. To set,

highlight, press multi selector to right, and
enter date ( 9). To select, highlight and
press center of multi selector.

Press multi selector right to view stored dates

Press multi selector right to view display options

STORED DATES

OK

2006.10.19

2006.12.24

---------------

OK

MENU

Exit

Confirm

60

Display
options

Highlight Number of Days, Years and Days, or Yrs, Mnths, Days
and press center of multi selector.

Sample date counter time stamps are shown below.

09/10.10.2006 02/21.10.2006

Future date
(days remaining)

Past date
(days elapsed)

Date Imprint

The date is recorded in the order selected in the DATE menu ( 57). Date imprint can
not be used to print date information on existing pictures. See “Creating a DPOF Print
Order: Print Set” ( 52) for a comparison of date imprint and Print set>Date.
Date imprinted at an Image mode setting of TV screen(640) may be difficult to read.
Choose PC screen(1024) or larger when using date imprint.

Sound Settings

Set the following:

Option Description

Button
sound

When ON is selected, beep will sound
once when operations are completed
successfully, three times when error is
detected.

Shutter

Choose shutter sound ON or OFF.

sound

Start-up

Choose start-up sound ON or OFF.

sound

SOUND SETTINGS
Button sound

Shutter sound
Start-up sound

MENU OK

ConfirmExit

ON
ON
ON

Basic Camera Setup: The Setup Menu

61

Blur Warning

Choose whether or not the blur warning is displayed
( 16). Note that the warning may not always be
displayed ( 85).

BLUR WARNING

OK

MENU

Exit

Off
On

Confirm

Auto Off

Choose the time before the monitor turns off auto­matically to save power ( 8).

Basic Camera Setup: The Setup Menu

Option Description

Auto off Choose delay before monitor turns off

when no operations are performed.

Sleep Mode Select On or Off. If On is selected, mon-

itor will turn off if no change is detected
in brightness of subject for 30 s (Auto

off set to 1 min. or less) or 1 min. (Auto
off set to 5 min. or more).

Regardless of the option selected, the monitor will remain on for a minimum
of three minutes when menus are displayed, and for thirty minutes during a
slide show.

AUTO OFF
Auto off

Sleep Mode

MENU OK

ConfirmExit

1m
OFF

62

Format Memory/ Format Card

If no memory card is inserted, this option is named
Format memory and formats internal memory.
Otherwise it is named Format card and formats the
memory card for use in the camera. Note that for-

matting permanently deletes all pictures and other
data. Be sure to make copies as required before for-

matting.
Two format options are available when a memory
card is inserted: Quick format (formats only areas
of the card on which data are stored) and Format
(formats entire card). Format is not available when
batteries are low.

Format

Do not turn the camera off or remove the batteries or memory card during formatting.
Use the Format option to format memory cards before first use and reformat them
regularly thereafter. Without regular formatting, performance will drop with use.

FORMAT MEMORY

WARNING!
All images will be deleted!

No

Format

MENU OK

MENU OK

ConfirmExit

MEMORY CARD FORMAT

Quick format

Format

ConfirmExit

Language

Choose a language for camera menus and messages
from the following options:

Deutsch German Russian

English English Svenska Swedish

Español Spanish Japanese

Français French Simplified

Chinese

Italiano Italian Traditional

Chinese

Nederlands Dutch Korean

MENU OK

ConfirmBack

Basic Camera Setup: The Setup Menu

63

Interface

Adjust settings for connection to a computer or
video device.

Option Description

USB Select USB option for connection to

computer ( 42) or printer ( 47).

Video mode Choose from NTSC and PAL ( 41).

Auto
transfer

Basic Camera Setup: The Setup Menu

Reset All

Choose On to mark all new pictures for
transfer to computer ( 43).

Select Reset all to restore camera settings to their
default values ( 88).

Battery Type

To ensure that the camera shows the correct battery
level ( 13), choose a type that matches the batter­ies currently in use.

Option Battery Type

Alkaline Alkaline

COOLPIX (NiMH) EN-MH1, oxyride

Lithium Lithium

INTERFACE
USB

Video mode
Auto transfer

MENU OK

Reset all settings to default
values

MENU OK

MENU OK

ConfirmExit

RESET ALL

No

Reset

ConfirmExit

BATTERY TYPE

Alkaline

COOLPIX(NiMH)

Lithium

ConfirmExit

Firmware Version

View the current camera firmware version.

64

COOL

PIX L4 Ver.X.X

Back

Shooting Options: The Shooting Menu

With the exception of Image mode, the following
options are available only in (auto) mode. See
“Menus” for information on viewing and using the
shooting menu ( 53).

SHOOTING MENU

SET-UP
Image mode
White balance
Exp. +/­Continuous

MENU

OK

Exit

Confirm?Help

Option Description

SET-UP Display the setup menu. 56

Image mode Choose image size and quality. 65

White balance* Match white balance to the light source. 66

Exposure
compensation

Exposure can be compensated for in the case of a
subject that is bright, dark or with strong con-

68

trast.

Continuous* Take pictures one at a time or in a sequence. 68

BSS* Use BSS to choose the sharpest picture. 69

Color Options* Control color. 70

* See the Appendix for information on restrictions that may apply to these settings

( 92).

Shooting Menu Settings

See the Appendix for information on shooting menu defaults ( 88).

Image Mode

Pictures taken with a digital camera are recorded as
image files. The size of the files, and with it the num­ber of images that can be recorded ( 91), depends
on the size and quality of the images (image mode).
Before shooting, choose an image mode according

IMAGE MODE

High(2272 )

Normal(2272)

Normal(1600)
PC screen(1024)
TV screen(640)

MENU OK

ConfirmExit

to how you plan to use the picture.

1/2

Shooting Options: The Shooting Menu

Option Size (pixels) Description

High(2272★) 2272 × 1704 Pictures are compressed less than Normal,

producing higher quality images.

Normal(2272) 2272 × 1704 Best choice in most situations.

65

Option Size (pixels) Description

Normal(1600) 1600 × 1200 Smaller size allows more pictures to be

stored.

PC screen

1024 × 768 Suited to computer display.

(1024)

TV screen(640) 640 × 480 Suited to e-mail or television viewing.

The current setting is shown by an icon in the dis­play.

Shooting Options: The Shooting Menu

White Balance

Process pictures to produce natural colors under dif­ferent types of light.

Option Description

Auto White balance automatically adjusted to suit lighting condi-

tions. Best choice in most situations.

White bal.
preset

Daylight White balance adjusted for direct sunlight.

Incandescent Use under incandescent lighting.

Fluorescent Use under most types of fluorescent lighting.

Cloudy Use when taking pictures under overcast skies.

Flash Use with the flash.

Neutral-colored object used as reference to set white balance
under unusual lighting conditions ( 67).

WHITE BALANCE

Auto

White bal. preset
Daylight
Incandescent
Fluorescent

MENU OK

1/2

ConfirmExit

66

At settings other than Auto, the current setting is
shown by an icon in the display.

Preset White Balance

Preset white balance is used with mixed lighting or to compensate for light
sources with a strong color cast (for example, to make pictures taken under a
lamp with a red shade look as though they had been taken under white
light).

Place white or gray reference

1

object under lighting that
will be used during shooting.

2

WHITE BALANCE

Auto

White bal. preset

Daylight
Incandescent
Fluorescent

MENU OK

ConfirmExit

1/2

Highlight White bal. preset.

34

WHITE BAL PRESET

Cancel

Measure

MENU OK

ConfirmExit

WHITE BAL PRESET

Cancel

Measure

MENU OK

ConfirmExit

Camera zooms in. Highlight Measure.

Shooting Options: The Shooting Menu

67

5

WHITE BALANCE

Auto

White bal. preset

Daylight
Incandescent
Fluorescent

MENU OK

ConfirmExit

1/2

Frame the reference object and press the center of the multi selector.

The new white balance value is set.

* To restore most recent value for preset white balance, highlight Cancel and press

center of multi selector.

Shooting Options: The Shooting Menu

Preset White Balance

Preset white balance cannot be measured with the flash.

Exposure Compensation

Exposure compensation allows you to adjust the
exposure setting suggested by the camera from
between –2.0 EV (underexposure) and +2.0 EV
(overexposure) in increments of 1/3 EV.

EXP. +/-

+0.3

0

-0.3

MENU OK

ConfirmExit

Continuous

Capture a fleeting expression on a portrait subject,
photograph a subject that is moving unpredictably,
or capture motion in a series of pictures.

CONTINUOUS

Single

Multi-shot 16

MENU OK

Option Description

Single One shot is taken each time shutter-release button is pressed.

68

ConfirmExit

Option Description

Multi-shot 16 Each time shutter-release button is

pressed, camera takes 16 shots at about

1.4 frames per second and arrange them in
a single picture (2272 × 1704 image size)
as shown at right.

At settings other than Single, focus, exposure, and
white balance are fixed at the values for the first pic­ture in each series and the current setting is shown
by an icon in the display.

BSS

The “best shot selector” (BSS) is recommended
when shooting with the flash off or the camera
zoomed in, or in other situations in which inadvert­ent motion can result in blurred pictures. When BSS
is on, the camera takes up to ten pictures while the
shutter-release button is pressed. The sharpest pic­ture in the series is saved and the others are dis­carded.
A BSS icon is displayed when BSS is on.

BSS

BSS may not produce the desired results if the subject moves or the composition is
changed during shooting.

BEST SHOT SELECTOR

Off
On

MENU OK

ConfirmExit

Shooting Options: The Shooting Menu

66

69

Color Options

Make colors more vivid or record pictures in mono­chrome.

Option Description

Standard
color

Vivid color Vivid, “photoprint” colors.

Black-and­white

Sepia Record pictures in sepia.

Cyanotype Take pictures in blue-tinted mono-

Shooting Options: The Shooting Menu

The effects of the selected option can be previewed
in the monitor. At settings other than Standard
Color, the current setting is also indicated by an icon
in the display.

Natural color.

Take pictures in black-and-white.

chrome.

COLOR OPTIONS

Standard color

Vivid color
Black-and-white
Sepia
Cyanotype

MENU OK

ConfirmExit

70

Playback Options: The Playback Menu

The playback menu contains the following options.
See “Menus” for information on viewing and using
the playback menu ( 53).

PLAYBACK MENU

SET-UP
Print set
Slide show
Delete
Protect

MENU

Exit

Option Description

SET-UP Display the setup menu. 56

Print set Select pictures for printing. 71

Slide show View pictures in an automatic slide show. 72

Delete Delete all or selected pictures. 73

Protect Protect selected pictures from accidental deletion. 73

Transfer

Change transfer marking for existing pictures. 73

marking

Small pic. Create a small copy of the current picture. 74

Copy Copy files between memory card and internal memory. 75

Print Set

Create digital “print orders” for PictBridge printers
and devices that support DPOF ( 52).

PRINT SET

Print selected

Delete print set

MENU OK

OK

Confirm?Help

ConfirmExit

1/2

Playback Options: The Playback Menu

71

Slide Show

:Confirm

Play pictures back in an automated “slide show,”
with about three seconds between each picture.

SLIDE SHOW

Pause

MENU

Exit

Start
Loop

OK

OK

Confirm

12

SLIDE SHOW

MENU

Exit

Pause

OK

OK

Start
Loop

Confirm

Highlight Start. Begin slide show.

Playback Options: The Playback Menu

Movies

Movies appear in slide shows as still images of the first frame.

“Loop”

Select Loop to repeat the slide show until the center of the multi selector is pressed.
Note that the monitor will turn off automatically if no operations are performed for 30
minutes.

To skip to the next picture, press the multi selector to the right, or press the
multi selector to the left to return to the previous picture. Hold the multi
selector down to fast forward or rewind. To pause the slide show, press the
center of the multi selector. The menu shown below will be displayed.
When the slide show ends or is paused, the menu
shown at right will be displayed. Highlight Restart

Pause

and press the center of the multi selector to restart
the show, or select End to end the show and return
to the playback menu.

End

Restart

OK

:Confirm

:Confirm

72

Delete

100NIKON

15 : 30

0005.JPG

10 . 10.2 0 06

100NIKON

4

15 : 30

0005.JPG

10 . 10.2 0 06

Delete all or selected pictures. Note that pictures
marked with a icon are protected and cannot be
deleted.

DELETE

Erase selected images

Erase all images

Protect

Protect selected pictures from accidental deletion.
Protected pictures are marked with a icon (see
right, below) and cannot be deleted using the
button or the Delete option in the playback menu.
Note, however, that formatting will delete protected
files ( 63).

Transfer Marking

Mark pictures to be transferred automatically to a
personal computer installed with “PictureProject”
(bundled software) when the camera is connected to
it via the supplied USB cable. In the default setting,
all pictures will be marked.

Option Description

All on Mark all images for transfer.

All off Remove transfer marking from all

images.

Select
image(s)

Pictures selected for transfer are marked with a icon.

Mark selected pictures for transfer
( 55).

MENU OK

10. 10. 2006
12 : 00

MENU OK

10.10.2006

10.10.2006
15:30

15:30

MENU OK

10.10.2006

10.10.2006
15:30

15:30

ConfirmExit

PROTECT

[ 4/ 5]

ConfirmExit

TRANSFER MARKING

All on

All off
Select image(s)

ConfirmExit

ON
OFF

100NIKON

100NIKON

0005.JPG

0005.JPG

OK

4/5/5

4

100NIKON

100NIKON

0005.JPG

0005.JPG

OK

/5/

4

5

4

Playback Options: The Playback Menu

73

Small Pic.

1100N

15 : 30

1

000

10 . 10.2 0 06

Create a small copy of the current picture. Choose
from the following sizes:

Option Description

640×480 Suited to television playback.

320×240 Suited to display on web pages.

160×120 Suitable for e-mail.

A confirmation dialog will be displayed. Highlight
Yes and press the center of the multi selector to cre­ate a copy at the chosen size.

During playback, small copies are indicated by a
gray border; a , , or icon is displayed when
copies are viewed full-frame.

Playback Options: The Playback Menu

SMALL PIC

640×480

320×240
160×240

MENU OK

Save this image
as displayed?

No

Ye s

10.10.2006

10.10.2006

15:30

15:30

ConfirmExit

OK

Confirm

Small Picture

Small copies are compressed for reduced file size and may not display or transfer cor­rectly when viewed on other models of Nikon camera. See the Appendix for more
information on small copies ( 93).

74

Copy

Copy pictures between internal memory and a mem­ory card.

Option Description

Copy pictures from internal memory to
memory card.

Copy pictures from memory card to
internal memory.

COPY

MENU OK

ConfirmExit

Selecting either of the above options displays the
menu shown at right. Choose Selected images to
select the pictures that will be copied ( 55) or All

CAMERA TO CARD

Selected images

All images

images to copy all pictures.

MENU OK

A confirmation dialog will be displayed. Highlight
Yes and press the center of the multi selector to
copy the images.

Copy

The camera may be unable to copy pictures that were created with another make of
camera or that have been modified on a computer. See pages 92–93 for more infor­mation on how copies are stored.

Selected images will be copied.
OK?

MENU OK

ConfirmExit

CAMERA TO CARD

No

Ye s

ConfirmExit

Playback Options: The Playback Menu

75

Technical Notes

Optional Accessories

At the time of writing, the following optional accessories were available for
this camera. Contact your local retailer or Nikon representative for details.

Rechargeable
battery

Battery
charger

AC adapter EH-65A AC adapter kit (connects as shown)

Nikon EN-MH1 rechargeable NiMH batteries (EN-MH1-B2)

MH-71 battery charger

EH-62B AC adapter kit cannot be used.

Approved Memory Cards

The following cards have been tested and approved for use in the
COOLPIX L4:

SanDisk

Toshiba

Panasonic

* High speed (10MB/s)

Technical Notes

64MB, 128MB, 256MB, 512MB, 1GB / 256MB*, 512MB*, 1GB*

64MB, 128MB, 256MB, 512MB, 1GB / 128MB*, 256MB*, 512MB*

64MB, 128MB, 256MB, 512MB, 1GB / 256MB*, 512MB*, 1GB*

Other cards have not been tested. For more details on the above cards,
please contact the manufacturer.

76

Memory Cards

• Use only Secure Digital (SD) memory cards.

• Format memory cards before first use ( 63).

• Do not eject the memory card, turn the camera off, remove the batteries, or discon-

nect the AC adapter during formatting or while data are being written to or deleted
from the card. Failure to observe this precaution could result in loss of data or dam­age to the camera or card.

• Do not disassemble or modify.

• Do not drop, bend, or expose to water or strong physical shocks.

• Do not touch the metal terminals with your fingers or metal objects.

• Do not affix labels or stickers to the memory card.

• Do not leave in direct sunlight, closed vehicles, or areas exposed to high tempera-

tures.

• Do not expose to high levels of humidity or to corrosive gas.

77

Technical Notes

Caring for the Camera

To ensure continued enjoyment of this Nikon product, observe the following
precautions when storing or using the device.

Handle the lens and all moving parts with care

Do not apply force to the lens, monitor, memory card slot, or battery-chamber and lens
covers. These parts are easily damaged. Force applied to the lens cover could cause
malfunction or damage the lens. Should the monitor break, care should be taken to
avoid injury due to broken glass and to prevent the liquid crystal from the display
touching the skin or entering the eyes or mouth.

Do not point the lens at strong light sources for extended periods

Avoid pointing the lens at the sun or other strong light sources for extended periods
when using or storing the camera. Intense light may cause deterioration in the CCD
image sensor, producing a white blur effect in photographs.

Turn the product off before removing or disconnecting the power

source

Do not unplug the product or remove the batteries while the product is on, or while
images are being recorded or deleted. Forcibly cutting power in these circumstances
could result in loss of data or in damage to product memory or internal circuitry. To
prevent an accidental interruption of power, avoid carrying the product from one place
to another while an AC adapter is connected.

Keep dry

The device will be damaged if immersed in water or subjected to high levels of mois­ture.

Do not drop

The product may malfunction if subjected to strong shocks or vibration.

Keep away from strong magnetic fields

Do not use or store this device in the vicinity of equipment that generates strong elec-

Technical Notes

tromagnetic radiation or magnetic fields. Strong static charges or the magnetic fields
produced by equipment such as radio transmitters could interfere with the monitor,
damage data stored on the memory card, or affect the product’s internal circuitry.

Avoid sudden changes in temperature

Sudden changes in temperature, such as occur when entering or leaving a heated
building on a cold day, can cause condensation inside the device. To prevent conden­sation, place the device in a carrying case or a plastic bag before exposing it to sudden
changes in temperature.

78

Batteries

• Check the battery level when taking the camera out and replace the batteries if nec-

essary ( 13). If possible, carry spare batteries when taking pictures on important
occasions.

• Battery capacity tends to decrease on cold days. Be sure that the batteries are fresh

before heading outside to take pictures in cold weather. Keep spare batteries in a
warm place and exchange as necessary. Once warmed, a cold battery may recover
some of its charge.

• Dirt on the battery terminals can prevent the camera from functioning.

• Used batteries are a valuable resource. Please recycle used batteries in accordance

with local regulations.

Cleaning

Lens

Avoid touching glass parts with your fingers. Remove dust or lint with
a blower (typically a small device with a rubber bulb attached to one
end that is pumped to produce a stream of air out the other). To
remove fingerprints or other stains that cannot be removed with a
blower, wipe the lens with a soft cloth, using a spiral motion that starts
in the center of the lens and works out to the edges. If this fails, clean
the lens using a cloth lightly dampened with commercial lens cleaner.

Monitor

Remove dust or lint with a blower. To remove fingerprints and other
stains, clean the monitor with a soft, dry cloth, being careful not to
apply pressure.

Body

Use a blower to remove dust, dirt, or sand then wipe gently with a
soft, dry cloth. After using the camera at the beach or seaside, wipe off
any sand or salt with a dry cloth lightly dampened with fresh water,
then dry thoroughly. Note that foreign matter inside the camera could
cause damage not covered under warranty.

Do not use alcohol, thinner, or other volatile chemicals.

Technical Notes

79

Storage

Turn the camera off when not in use. Check that the power-on lamp is off
before putting the camera away and remove the batteries if the camera will
not be used for an extended period. Do not store the camera with naptha or
camphor moth balls or in locations that:

• are next to equipment that produces strong electromagnetic fields, such as

televisions or radios

• are exposed to temperatures below –10°C (14°F) or above 50°C (122°F)

• are poorly ventilated or subject to humidities of over 60%

To prevent mold or mildew, take the camera out of storage at least once a
month. Turn the camera on and release the shutter a few times before put­ting the camera away again.

Technical Notes

Notes on the Monitor

• The monitor may contain a few pixels that are always lit or that do not light. This is a

characteristic common to all TFT LCD displays, and does not indicate a malfunction.
Images recorded using the product will not be affected.

• When you frame bright subjects, vertical comet-like streaks that whiten toward

either end may appear in the display. This phenomenon, known as “smear,” does
not appear in the final photograph and does not indicate a malfunction. Some smear
may appear in movies.

• Images in the monitor may be difficult to see in a bright light.

• The monitor is lit by an LED backlight. Should the monitor begin to dim or flicker,

contact your Nikon service representative.

80

Error Messages

The following table lists the error messages and other warnings that appear
in the monitor and how to deal with them.

Display Problem Solution

(blinks) Clock not set. Set clock. 57

Batteries running low. Ready spare batteries. 6

WARNING!!
BATTERY
EXHAUSTED

AF● (● blinks red) Camera cannot focus. Recompose picture. 15

(blinks) Slow shutter speed. Pic-

WARNING!!
PLEASE WAIT FOR
CAMERA TO FIN­ISH RECORDING

Batteries exhausted. Replace batteries. 6, 64

tures may be blurred.

Camera cannot perform
other operations until
recording is complete.

Use flash, or steady camera
using tripod, by placing
camera on level surface, or
by holding camera in both
hands with elbows against
torso.

Message clears from dis­play automatically when
recording is complete.

16, 18

—

MEMORY CARD IS
WRITE PROTECTED

THIS CARD CAN­NOT BE USED

WARNING!!
THIS CARD CAN­NOT BE READ

CARD IS NOT FOR­MATTED

Format

No

Write-protect switch is in
“Lock” position.

Error accessing memory
card.

Memory card has not
been formatted for use in
camera.

Slide write-protect to
“write” position.

• Use approved card.

• Check that connectors are

clean.

• Confirm that memory

card is correctly inserted.

Highlight Format and press

to format card, or turn
camera off and replace
card.

12

76
—

11

11, 63

Technical Notes

81

Display Problem Solution

IMAGE CANNOT
BE SAVED

or

Error occurred while
recording picture.

Camera has run out of
file numbers.

Format internal memory or
memory card.

• Insert new memory card.

• Format internal memory

or memory card.

Cannot create cropped,
D-lighting, or small copy.

Select picture that supports
crop, D-lighting, or small
picture.

Picture cannot be used
for welcome screen.

Choose picture 640×480
pixels or larger.

Cannot copy picture. Delete pictures from desti-

nation.

CANNOT RECORD
MOVIE

OUT OF MEMORY

or

Time out error while
recording movie.

Memory card is full.

Choose memory card with
faster write speed.

• Choose smaller image

size.

• Delete pictures.

• Insert new memory card.

• Remove memory card and

use internal memory.

CARD CONTAINS
NO IMAGES

No pictures available for
playback.

——

63

11
63

93

—

73

76

65

73
11
11

FILE CONTAINS NO
IMAGE DATA

ALL IMAGES ARE

Technical Notes

HIDDEN

THIS IMAGE CAN­NOT BE DELETED

NEW CITY IS IN
THE CURRENT
TIME ZONE

82

File not created with
COOLPIX L4.

No pictures available for

View file on computer or

—

other device.

——

display in welcome
screen or slide show.

Picture is protected. Remove protection. 73

Destination in same time
zone as home.

No need to change time
zones if destination is in

57

same time zone as home.

Display Problem Solution

LENS ERROR Lens error. Turn camera off and then

on again. If error persists,
contact retailer or Nikon
representative.

COMMUNICA­TIONS ERROR

USB cable disconnected
during transfer or print­ing.

If PictureProject displays
error, click OK to exit.
Resume operation after
turning camera off and
reconnecting cable.

USB option incorrect. Choose correct USB option. 44

PictureProject did not
start.

See the PictureProject refer­ence manual (on CD) for
more information.

NO IMAGES ARE
MARKED FOR

No pictures selected for
transfer.

Select pictures for transfer
and try again.

TRANSFER

13

41, 42

—

73

TRANSFER ERROR Transfer error.

SYSTEM ERROR Error has occurred in

camera’s internal cir­cuitry.

PRINTER ERROR

Printer error. Check printer. To resume,
CHECK PRINTER
STATUS

• Check battery level.

• Check that USB cable is

connected.

Turn camera off, remove
and reinsert batteries, and
turn camera on. If error per­sists, contact retailer or
Nikon representative.

highlight Resume (if avail­able) and press .

13
43

6, 13

—

Technical Notes

83

Troubleshooting

If the camera fails to function as expected, check the list of common prob­lems below before consulting your retailer or Nikon representative. Refer to
the page numbers in the right-most column for more information.

Problem Cause/Solution

Camera turns off
without warning

Monitor is blank

No indicators appear in monitor Hide info is selected for Photo info.

Monitor is hard to read

Camera clock is not correct Check camera clock regularly against

Camera settings reset Clock battery exhausted: recharge clock

Technical Notes

No picture taken when shutter­release button is pressed

• Batteries are low.

• Batteries are cold.

• Camera is off.

• Batteries are exhausted.

• Standby mode: press shutter-release

button halfway.

• Flash lamp blinks: wait until flash has

charged.

• USB cable is connected.

• Video cable is connected.

Select Show info.

• Adjust monitor brightness.

• Monitor is dirty: clean monitor.

more accurate timepieces and reset as
required. Pictures recorded before clock
has been set will have time stamp of
“00.00.0000 00:00”; movies will be
dated “01.01.2005 00:00.”

battery.

• Camera is in playback mode: press

button.

• Menus are displayed: press MENU

button.

• Batteries are exhausted.

• Flash lamp blinks: flash is charging.

13
79

13
13
8, 62

18

42, 47
41

59

59
79

57

58

37

53

13
18

84

Problem Cause/Solution

Camera cannot focus using auto­focus

• Subject is low in contrast, dominated

by repeating geometric patterns, cov-

15

ers too small an area of the frame, or
contains many fine details, objects of
sharply differing brightness, or objects
at different distances from the cam­era. Use focus lock to focus on
another subject at same distance.

• Focus error. Turn camera off and then

13

on again.

Pictures are blurred • Use flash.

• Use BSS.

• Use tripod and self-timer.

Pictures are too dark
(underexposed)

• Flash is off.

• Flash window is blocked.

• Subject is outside range of flash.

• Exposure compensation is too low.

• Subject is backlit: select (scene

18
69
20

18
14
18
68
18, 30

mode) or use fill flash.

Randomly-spaced bright pixels
(“noise”) appear in image

Shutter speed too slow. Noise can be
reduced by:

• Using flash

• Choosing , , , , , , ,

18
23

, or in scene mode

Pictures are smeared Lens is dirty. Clean lens. 79

Colors are unnatural White balance does not match light

66

source.

Flash does not fire Flash is off. Note that flash turns off

automatically in (movie) mode and

18,

68, 69
some scene modes or when option
other than Single is selected for Con-
tinuous or BSS is on.

Bright specks in pictures taken
with flash

Flash is reflecting from particles in air.
Turn flash off.

18

Technical Notes

85

Problem Cause/Solution

Blur warning is not displayed Blur warning is not displayed in self-

timer mode or when , , , or
is selected in scene mode, option other
than Single is selected for Continu-
ous, or BSS is on.

No sound when shutter is released Off selected for Sound set-

Optical zoom cannot be used Optical zoom cannot be used while

Digital zoom cannot be used Digital zoom is not available in framing

Image mode not available Image mode cannot be adjusted when

Date imprint not available Camera clock has not been set. 57

Date not appearing on pictures Date does not appear on movies or on

File cannot be played back File has been overwritten or renamed

Cannot zoom in on picture Playback zoom cannot be used with

Cannot use crop, D-lighting, or

Technical Notes

small picture options

Cannot mark pictures for transfer No more than 999 pictures can be

Transfer marking does not appear Pictures were marked for transfer using

tings>Shutter sound.

shooting movies.

assist modes or when Multi-shot 16 is
selected for Continuous.

Multi-shot 16 is selected for Continu­ous or “Sports composite” is selected

in scene mode.

pictures taken using panorama assist.

by computer or other make of camera.

movies, small pictures, or pictures that
have been cropped to below 320 ×

240.

These options cannot be used with
movies and may not be available with
pictures created with other cameras.
Select picture that supports crop, D­lighting, or small picture.

marked for transfer. Use PictureProject
Transfer button to transfer pictures.

another model of camera. Mark pic­tures for transfer using COOLPIX L4.

20,

23,

68, 69

61

33

23,

33, 68

27, 68

30, 34

—

—

93

43

—

86

Problem Cause/Solution

PictureProject does not start when
camera is connected

• Camera is off.

• Batteries are exhausted.

• USB cable is not correctly connected.

• Appropriate USB option is not

selected.

• Camera is not registered in Device

13

13

42

44

—

Manager (Windows only).
See the PictureProject reference man­ual (on CD) for further information.

Pictures not displayed on television Choose correct video mode. 41

Format memory > Format

Batteries are low. 13, 63

option not available

Electronically Controlled Cameras

In extremely rare instances, unusual characters may appear in the monitor and the
camera may stop functioning. In most cases, this phenomenon is caused by a strong
external static charge. Turn the camera off, remove and replace the batteries, and then
turn the camera on again. In the event of continued malfunction, contact your retailer
or Nikon representative. Note that disconnecting the power source as described above
may result in the loss of any data not recorded to internal memory or the memory card
at the time the problem occurred. Data already recorded will not be affected.

87

Technical Notes

Appendix

Defaults ( 54, 56, 65)

Choosing Reset for Reset all restores the following default settings:

Option Default Option Default

mode Scene mode PORTRAIT

Flash mode ( 18) Auto Portrait assist ( 25)

Self timer ( 20) OFF Landscape assist

( 27)

Macro close-up
( 22)

Setup menu Night portrait assist

Welcome screen

( 57)

Photo info ( 59) Show info Image mode ( 65) Normal (2272)

Brightness ( 59) 3 White balance

Date imprint ( 60) Off Exposure Compensa-

Button sound ( 61) ON Continuous ( 68) Single

Shutter sound

( 61)

Start-up sound
( 61)

Blur warning ( 62) On

Technical Notes

Auto off ( 62) 1 m Movie options

Sleep Mode ( 62) Off Auto-focus mode

Auto transfer (64)On

Menus ( 57) Text Paper size ( 49) Default

OFF Sports assist ( 27)

( 28)

Animation Shooting menu

Auto

( 66)

0

tion ( 68)

ON BSS ( 69) Off

ON Color Options

( 70)

Movie menu

( 35)

( 36)

PictBridge

Standard color

Small size 320

Single AF

88