Nikon HMSM4050 User Manual
Qu ick S tart Guid e
HMSM4050
Wireless
Motion Sensor
1
Introduction
Congratulations on your purchase of the Motorola Wireless Motion Sensor (WMS). Your sensor uses a heat/motion
detector to scan a field 90 degrees wide up to a range of approximately 20 feet. This enables you to secure an area,
regardless of day or night, rain or shine. This Quick Start Guide describes how to set up and troubleshoot your
Wireless Motion Sensor.
Using Your Motion Sensor
The WMS can report detected events or interact with other system devices when motion is detected to record the
event. Positioning is critical in the mounting of your WMS, particularly if used in conjunction with a Motorola
homsight™ Video Camera to record triggered events. Using your computer and the Wireless System Controller, you
locally manage your home environment from your PC with the Motorola homesight™ software. When configured, the
system can notify you of any new events by sending you an e-mail. An event is defined as movement in the field
covered by the heat /motion sensor.
How It Works
The Wireless Motion Sensor can communicate with the Wireless System Controller to a distance of up to 60 feet
indoors, and 200 feet outdoors. It can detect heat/motion within a field of 90 degrees horizontally. If armed,
heat/motion triggers an event that is communicated wirelessly back to the Wireless System Controller, which in turn
sends event information back to your PC.
Controller
2
Installation Overview
Your package contains the following:
Wireless
Motion
Sensor
Installing your sensor is a simple process.
1 Twist the WMS clockwise at the seam in the middle and pull the two halves apart.
2 Insert batteries.
Register your sensor with your Wireless System Controller using a process called Discovery. Refer3 to your
homesight Software User Guide for instructions on how to discover your Wireless Motion Sensor.
Wall
Moounting
Bracket
Hardware
Mounting
Kit
Batteries
4 Reassmble the halves tightening countercl
bracket (if used) will attach correctly
5 ount the sensor.
M
Feature Locator
.
Battery
installation
ockwise until it clicks. Line up the vertical seams so the wall mounting
2
1
AA
AA
Discovery Button
3
Loading...