Nikon COOLPIX P610 Reference Manual

Download

Reference Manual

DIGITAL CAMERA

Introduction

Table of Contents

Parts of the Camera

Preparing for Shooting

Basic Shooting and Playback Operations

Shooting Features

Functions That Can Be Set with the d (Menu) Button

Using Location Data Functions

Using the Wi-Fi (Wireless LAN) Function

Connecting the Camera to a TV, Printer, or Computer

Reference Section

Technical Notes and Index

xiv

Introduction

Read This First

To get the most from this Nikon product, be sure to read “For Your Safety”

Introduction

(Avi-viii), “<Important> Notes About Location Data Functions (GPS/ GLONASS)” (Axi) and “Wi-Fi (Wireless LAN Network)” (Axii), and all other instructions thoroughly and keep them where they will be read by all who use the camera.

• If you want to start using the camera right away, see “Preparing for

Shooting” (A9) and “Basic Shooting and Playback Operations” (A16).

Other Information

• Symbols and Conventions

Symbol Description

This icon marks cautions and information that should be read

before using the camera.

This icon marks notes and information that should be read before

using the camera.

A/E/F

• SD, SDHC, and SDXC memory cards are referred to as “memory cards” in this manual.

• The setting at the time of purchase is referred to as the “default setting.”

• The names of menu items displayed in the camera monitor, and the names

of buttons or messages displayed on a computer monitor appear in bold.

• In this manual, images are sometimes omitted from monitor display samples so that monitor indicators can be more clearly shown.

These icons mark other pages containing relevant information; E: “Reference Section”, F:“Technical Notes and Index.”

Information and Precautions

Holographic seal: Identifies this

device as an authentic Nikon product.

Life-Long Learning

As part of Nikon’s “Life-Long Learning” commitment to ongoing product support and education, continually updated information is available online at the following websites:

• For users in the U.S.A.: http://www.nikonusa.com/

• For users in Europe and Africa: http://www.europe-nikon.com/support/

• For users in Asia, Oceania, and the Middle East: http://www.nikon-asia.com/

Visit these websites to keep up-to-date with the latest product information, tips, answers to frequently asked questions (FAQs), and general advice on digital imaging and photography. Additional information may be available from the Nikon representative in your area. Visit the website below for contact information.

http://imaging.nikon.com/

Use Only Nikon Brand Electronic Accessories

Nikon COOLPIX cameras are designed to the highest standards and include complex electronic circuitry. Only Nikon brand electronic accessories (including battery chargers, batteries, AC adapters and, USB cables) certified by Nikon specifically for use with this Nikon digital camera are engineered and proven to operate within the operational and safety requirements of this electronic circuitry.

THE USE OF NON-NIKON ELECTRONIC ACCESSORIES COULD DAMAG E THE CAMERA

AND MAY VOID YOUR The use of third-party rechargeable Li-ion batteries not bearing the Nikon

holographic seal could interfere with normal operation of the camera or result in the batteries overheating, igniting, rupturing, or leaking.

For more information about Nikon brand accessories, contact a local authorized Nikon dealer.

Before Taking Important Pictures

Before taking pictures on important occasions (such as at weddings or before taking the camera on a trip), take a test shot to ensure that the camera is functioning normally. Nikon will not be held liable for damages or lost profits that may result from product malfunction.

NIKON WARRANTY.

Introduction

iii

About the Manuals

• No part of the manuals included with this product may be reproduced,

transmitted, transcribed, stored in a retrieval system, or translated into any language in any form, by any means, without Nikon’s prior written permission.

• Illustrations and monitor content shown in this manual may differ from the actual

Introduction

product.

• Nikon reserves the right to change the specifications of the hardware and software

described in these manuals at any time and without prior notice.

• Nikon will not be held liable for any damages resulting from the use of this

product.

• While every effort was made to ensure that the information in these manuals is

accurate and complete, we would appreciate it were you to bring any errors or omissions to the attention of the Nikon representative in your area (address provided separately).

Notice Concerning Prohibition of Copying or Reproduction

Note that simply being in possession of material that was digitally copied or reproduced by means of a scanner, digital camera or other device may be punishable by law.

• Items prohibited by law from being copied or reproduced

Do not copy or reproduce paper money, coins, securities, gove rnment bonds or local government bonds, even if such copies or reproductions are stamped “Sample.” The copying or reproduction of paper money, coins, or securities which are circulated in a foreign country is prohibited. Unless the prior permission of the government was obtained, the copying or reproduction of unused postage stamps or post cards issued by the government is prohibited.

The copying or reproduction of stamps issued by the government and of certified documents stipulated by law is prohibited.

• Cautions on certain copies and reproductions

The government has issued cautions on copies or reproductions of securities issued by private companies (shares, bills, checks, gift certificates, etc.), commuter passes, or coupon tickets, except when a minimum of necessary copies are to be provided for business use by a company. Also, do not copy or reproduce passports issued by the government, licenses issued by public agencies and private groups, ID cards and tickets, such as passes and meal coupons.

• Comply with copyright notices

The copying or reproduction of copyrighted creative works such as books, music, paintings, woodcut prints, maps, drawings, movies, and photographs is governed by national and international copyright laws. Do not use this product for the purpose of making illegal copies or to infringe copyright laws.

Disposing of Data Storage Devices

Please note that deleting images or formatting data storage devices such as memory cards does not completely erase the original image data. Deleted files can sometimes be recovered from discarded storage devices using commercially available software, potentially resulting in the malicious use of personal image data. Ensuring the privacy of such data is the user’s responsibility.

Before discarding a data storage device or transferring ownership to another person, erase all data using commercial deletion software, or format the device, set Record location data to Off in Location data options (E93), and then completely refill it with images containing no private information (for example, images of empty sky). Care should be taken to avoid injury or damage to property when physically destroying data storage devices.

For the COOLPIX P610, the log data saved on the memory card is handled in the same way as other data. To erase the log data that is obtained but not stored on the memory card, select Create log ➝ End log ➝ Erase log.

To delete the Wi-Fi settings, select Restore default settings in the Wi-Fi options menu (E91).

Introduction

For Your Safety

To prevent damage to your Nikon product or injury to yourself or to others, read the following safety precautions in their entirety before using this equipment. Keep these safety instructions where all those who use the product

Introduction

will read them. The consequences that could result from failure to observe the precautions

listed in this section are indicated by the following symbol:

This icon marks warnings, information that should be read before using this Nikon product, to prevent possible injury.

WARNINGS

Turn off in the event of malfunction

Should you notice smoke or an unusual smell coming from the camera or Charging AC Adapter, unplug the Charging AC Adapter and remove the battery immediately, taking care to avoid burns. Continued operation could result in injury. After removing or disconnecting the power source, take the equipment to a Nikon-authorized service representative for inspection.

Do not disassemble

Touching the internal parts of the camera or Charging AC Adapter could result in injury. Repairs should be performed only by qualified technicians. Should the camera or Charging AC Adapter break open as the result of a fall or other accident, take the product to a Nikon-authorized service representative for inspection, after unplugging the product and/or removing the battery.

Do not use the camera or Charging AC Adapter in the presence of flammable gas

Do not use electronic equipment in the presence of flammable gas, as this could result in explosion or fire.

Handle the camera strap with care

Never place the strap around the neck of an infant or child.

Keep out of reach of children

Particular care should be taken to prevent infants from putting the battery or other small parts into their mouths.

Do not remain in contact with the camera, Charging AC Adapter, or AC adapter for extended periods while the devices are on or in use

Parts of the devices become hot. Leaving the devices in direct contact with the skin for extended periods may result in low-temperature burns.

Do not leave the product where it will be exposed to extremely high temperatures, such as in an enclosed automobile or in direct sunlight

Failure to observe this precaution could cause damage or fire.

Observe caution when handling the battery

The battery may leak, overheat, or explode if improperly handled. Observe the following precautions when handling the battery for use in this product:

• Before replacing the battery, turn the product off. If you are using the Charging AC Adapter/AC adapter, be sure it is unplugged.

• Use only a Rechargeable Li-ion Battery EN-EL23 (included). Charge the battery by using a camera that supports battery charging. To perform this operation, use the Charging AC Adapter EH-71P/EH-71PCH (included) and USB Cable UC-E21 (included). The Battery Charger MH-67P (available separately) is also available to charge the battery without using a camera.

• When inserting the battery, do not attempt to insert it upside down or backwards.

• Do not short or disassemble the battery or attempt to remove or break the battery insulation or casing.

• Do not expose the battery to flame or to excessive heat.

• Do not immerse in or expose to water.

• Put the battery in a plastic bag, etc. in order to insulate it before transporting.

Do not transport or store with metal objects such as necklaces or hairpins.

• The battery is prone to leakage when fully discharged. To avoid damage to the product, be sure to remove the battery when no charge remains.

• Discontinue use immediately should you notice any change in the battery, such as discoloration or deformation.

• If liquid from the damaged battery comes in contact with clothing or skin, rinse immediately with plenty of water.

Observe the following precautions when handling the Charging AC Adapter

• Keep dry. Failure to observe this precaution could result in fire or electric

shock.

• Dust on or near the metal parts of the plug should be removed with a dry cloth. Continued use could result in fire.

• Do not handle the plug or go near the Charging AC Adapter during lightning storms. Failure to observe this precaution could result in electric shock.

Introduction

vii

• Do not damage, modify, forcibly tug or bend the USB cable, place it under heavy objects, or expose it to heat or flames. Should the insulation be damaged and the wires become exposed, take it to a Nikon-authorized service representative for inspection. Failure to observe these precautions could result in fire or electric shock.

• Do not handle the plug or Charging AC Adapter with wet hands. Failure to

Introduction

observe this precaution could result in electric shock.

• Do not use with travel converters or adapters designed to convert from one voltage to another or with DC-to-AC inverters. Failure to observe this precaution could damage the product or cause overheating or fire.

Use the appropriate power supply (battery, Charging AC Adapter, AC adapter, USB cable)

Using a power supply other than those provided or sold by Nikon could result in damage or malfunction.

Use appropriate cables

When connecting cables to the input and output jacks, use only the cables provided or sold by Nikon for the purpose, to maintain compliance with product regulations.

Do not touch the moving parts of the lens

Failure to observe this precaution could result in injury.

Handle moving parts with care

Be careful that your fingers or other objects are not pinched by the lens cover or other moving parts.

Using the flash close to your subject’s eyes could cause temporary visual impairment

The flash should be no less than 1 meter (3 ft 4 in.) from the subject. Particular care should be observed when photographing infants.

Do not operate the flash with the flash window touching a person or object

Failure to observe this precaution could result in burns or fire.

Avoid contact with liquid crystal

Should the monitor break, care should be taken to avoid injury caused by broken glass and to prevent liquid crystal from the monitor touching the skin or entering the eyes or mouth.

Follow the instructions of airline and hospital personnel

viii

Notices

Notices for Customers in the U.S.A.

IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS.

DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS

For connection to a supply not in the U.S.A., use an attachment plug adapter of the proper configuration for the power outlet if needed.

The power supply unit is intended to be correctly orientated in a vertical or floor mount position.

Federal Communications Commission (FCC) Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/television technician for help.

CAUTIONS

Modifications

The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Nikon Corporation may void the user’s authority to operate the equipment.

Interface Cables

Use the interface cables sold or provided by Nikon for your equipment. Using other interface cables may exceed the limits of Class B Part 15 of the FCC rules.

Introduction

Notice for Customers in the State of California

WARNING

Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm.

Wash hands after handling.

Introduction

Nikon Inc., 1300 Walt Whitman Road, Melville, New York 11747-3064, U.S.A. Tel: 631-547-4200

Notice for Customers in Canada

CAN ICES-3 B / NMB-3 B

Notices for Customers in Europe

CAUTIONS

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.

DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

This symbol indicates that electrical and electronic equipment is to be collected separately. The following apply only to users in European countries:

• This product is designated for separate collection at an appropriate collection point. Do not dispose of as household waste.

• Separate collection and recycling helps conserve natural resources and prevent negative consequences for human health and the environment that might result from incorrect disposal.

• For more information, contact the retailer or the local authorities in charge of waste management.

This symbol on the battery indicates that the battery is to be collected separately. The following apply only to users in European countries:

• All batteries, whether marked with this symbol or not, are designated for separate collection at an appropriate collection point. Do not dispose of as household waste.

• For more information, contact the retailer or the local authorities in charge of waste management.

<Important> Notes About Location Data Functions (GPS/GLONASS)

bLocation name data of this camera

Before using the location data functions, make sure to read “USER LICENSE AGREEMENT FOR LOCATION NAME DATA” (F22) and agree to the terms.

• The location name information (Points of Interest: POI) are as of April 2014. The location name information will not be updated.

• Use the location name information only as a guide.

• The location name information (Points of Interest: POI) of the People’s

Republic of China (“China”) and the Republic of Korea are not provided for the COOLPIX P610.

bNotes about record location data functions and log recording

• Use information measured by the camera as a guideline only.

This information cannot be used for navigation of an airplane, car, and person or land survey applications.

• When Record location data in Location data options of the location data options menu is set to On or during log recording, record location data functions and log recording function will continue to operate even after the camera is turned off (E40).

• An individual may be identified from still images or movies that have been recorded with location data. Observe caution when you transfer still images or movies recorded with location data, or log files to a third party or upload them to a network such as the Internet where the public can view them. Make sure to read “Disposing of Data Storage Devices” (Av).

bUsing the camera overseas

• Before taking the camera with location data functions overseas for travel,

consult your travel agency or embassy of the country you are visiting to confirm whether there is any restriction on use. For example, you cannot record location data logs without permission from the government in China. Set Record location data to Off.

• The location data may not function properly in China and on the borders between China and neighboring countries (as of December 2014).

Introduction

Wi-Fi (Wireless LAN Network)

This product is controlled by the United States Export Administration Regulations, and you are required to obtain permission from the United States government if you export or re-export this product to any country to which the

Introduction

United States embargoes goods. The following countries were subject to embargo: Cuba, Iran, North Korea, Sudan, and Syria. Since the target countries are subject to change, please contact the United States Department of Commerce for the latest information.

Restrictions on Wireless Devices

The wireless transceiver included in this product conforms to wireless regulations in the country of sale and is not for use in other countries (products purchased in the EU or EFTA can be used anywhere within the EU and EFTA). Nikon does not accept liability for use in other countries. Users who are unsure as to the original country of sale should consult with their local Nikon service center or Nikon-authorized service representative. This restriction applies to wireless operation only and not to any other use of the product.

Notice for Customers in the U.S.A. and Canada

Federal Communications Commission (FCC) and Industry of Canada (IC)

Declaration of Conformity

This device complies with Part 15 of FCC Rules and Industry Canada licenceexempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device.

FCC/IC RF Exposure Statement

This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure of low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by additional research.

xii

COOLPIX P610, which is equipped with a DW092 (FCC ID:EW4DW092/IC ID:4634A-3149EC) Wireless LAN Module, has been tested and found to comply with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. Please refer to the SAR test report that was uploaded to FCC website.

Declaration of Conformity (Europe)

Hereby, Nikon Corporation, declares that COOLPIX P610 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/ EC. The declaration of conformity may be consulted at

http://imaging.nikon.com/support/pdf/DoC_P610.pdf.

Notice for Customers in Jamaica

This product contains a Type Approved Module by Jamaica: “SMA – DW092”

Precautions when Using Radio Transmissions

Always keep in mind that radio transmission or reception of data is subject to interception by third parties. Note that Nikon is not responsible for data or information leaks that may occur during data transfer.

Personal Information Management and Disclaimer

• User information registered and configured on the product, including

wireless LAN connection settings and other personal information, is susceptible to alteration and loss resulting from operational error, static electricity, accident, malfunction, repair or other handling. Always keep separate copies of important information. Nikon is not responsible for any direct or indirect damages or lost profits resulting from alteration or loss of content that is not attributable to Nikon.

• Before discarding this product or transferring it to another owner, perform Reset all in the setup menu (A57) to delete all user information registered

and configured with the product, including wireless LAN connection settings and other personal information.

Introduction

xiii

Table of Contents

Introduction ................................................................................................................ ii

Read This First ............................................................................................................................ ii

Other Information........................................................................................................................................ ii

Information and Precautions ............................................................................................................... iii

For Your Safety ......................................................................................................................... vi

Table of Contents

WARNINGS ...................................................................................................................................................... vi

Notices......................................................................................................................................... ix

<Important> Notes About Location Data Functions (GPS/GLONASS) ................ xi

Wi-Fi (Wireless LAN Network)............................................................................................. xii

Parts of the Camera .................................................................................................. 1

The Camera Body...................................................................................................................... 1

The Monitor ................................................................................................................................ 3

Switching the Information Displayed in the Monitor (s Button).......................... 3

For Shooting ................................................................................................................................................... 4

For Playback..................................................................................................................................................... 7

Preparing for Shooting............................................................................................ 9

How to Attach the Camera Strap and Lens Cap ............................................................ 9

Insert the Battery and Memory Card ............................................................................... 10

Removing the Battery or Memory Card ...................................................................................... 10

Charge the Battery ................................................................................................................. 11

Opening and Adjusting the Angle of the Monitor ..................................................... 13

Turn the Camera On and Set the Display Language, Date, and Time ................. 14

Basic Shooting and Playback Operations....................................................... 16

Shooting with A (Auto) Mode.......................................................................................... 16

Using the Flash ........................................................................................................................................... 18

Switching Between the Monitor and Viewfinder.................................................................. 19

Using the Zoom......................................................................................................................................... 20

The Shutter-release Button ................................................................................................................. 21

Recording Movies ................................................................................................................... 21

Play Back Images..................................................................................................................... 22

Delete Images .......................................................................................................................... 23

Changing the Shooting Mode ........................................................................................... 24

Functions That Can Be Set Using the Multi Selector (for Shooting) ..................... 25

xiv

Shooting Features................................................................................................... 26

A (Auto) Mode ....................................................................................................................... 26

Scene Mode (Shooting Suited to Scenes)...................................................................... 27

Special Effects Mode (Applying Effects When Shooting)......................................... 28

j, k, l, m Modes (Setting the Exposure for Shooting) ......................................... 30

M (User Settings) Mode ........................................................................................................ 34

Saving Settings in M Mode (Save User Settings)................................................................... 35

Flash Mode ................................................................................................................................ 36

Self-timer ................................................................................................................................... 38

Smile Timer (Shooting Smiling Faces Automatically)................................................ 39

Focus Mode............................................................................................................................... 40

Using Manual Focus ................................................................................................................................ 42

Exposure Compensation (Adjusting Brightness) ........................................................ 44

Functions That Can Be Set with the Fn (Function) Button....................................... 45

Functions That Cannot Be Used Simultaneously When Shooting........................ 46

Functions That Can Be Set with the d (Menu) Button.......................... 49

The Shooting Menu ............................................................................................................... 51

Common Options..................................................................................................................................... 51

For j, k, l, m, M modes .................................................................................................................. 51

The Movie Menu ..................................................................................................................... 54

The Playback Menu ................................................................................................................ 55

The Image Selection Screen............................................................................................................... 56

The Setup Menu ...................................................................................................................... 57

Using Location Data Functions .......................................................................... 59

Using the Wi-Fi (Wireless LAN) Function ........................................................ 60

Installing the Software on the Smart Device ................................................................ 60

Connecting the Camera to a TV, Printer, or Computer.............................. 61

Table of Contents

Reference Section .............................................................................................. E1

Hints and Notes About the Scene Mode................................................................... E3

Shooting with Easy Panorama ................................................................................................. E10

Playback with Easy Panorama .................................................................................................. E12

Shooting Time-lapse Movies .................................................................................................... E13

Default Settings (Flash, Focus mode, Etc.)............................................................. E15

Table of Contents

Focusing............................................................................................................................. E18

Using Target Finding AF .............................................................................................................. E18

Using Face Detection .................................................................................................................... E19

Using Skin Softening...................................................................................................................... E20

Subjects Not Suitable for Autofocus .................................................................................... E20

Focus Lock............................................................................................................................................ E21

The Control Range of the Shutter Speed (j, k, l, m Modes)...................... E22

Playback Zoom ................................................................................................................ E23

Thumbnail Playback/Calendar Display................................................................... E24

Viewing and Deleting Images Captured Continuously (Sequence) ............. E25

Viewing Images in a Sequence ............................................................................................... E25

Deleting Images in a Sequence .............................................................................................. E26

Editing Images (Still Images) ...................................................................................... E26

Before Editing Images ................................................................................................................... E26

Quick Retouch: Enhancing Contrast and Saturation ................................................. E27

D-Lighting: Enhancing Brightness and Contrast ......................................................... E27

Skin Softening: Softening Skin Tones .................................................................................. E28

lter Effects: Applying Digital Filter Effects...................................................................... E29

Small Picture: Reducing the Size of an Image ............................................................... E30

Crop: Creating a Cropped Copy ............................................................................................. E31

Recording and Playing Back Movies........................................................................ E32

Capturing Still Images While Recording Movies ................................................. E35

Operations During Movie Playback ......................................................................... E36

Editing Movies ................................................................................................................. E37

Extracting Only the Desired Portion of a Movie............................................................ E37

Saving a Frame from a Movie as a Still Image ................................................................ E38

Recording the Location Data on the Image.......................................................... E39

Recording the Log of Movement Information ..................................................... E42

Ending Log to Save it on Memory Cards........................................................................... E44

Connecting to a Smart Device (Wi-Fi) ..................................................................... E45

Preselecting Images in the Camera That You Want to Transfer to a

Smart Device .................................................................................................................... E47

Connecting the Camera to a TV (Playback on a TV)........................................... E48

xvi

Connecting the Camera to a Printer (Direct Print).............................................. E49

Connecting the Camera to a Printer .................................................................................... E49

Printing Images One at a Time ................................................................................................ E50

Printing Multiple Images ............................................................................................................. E51

Using ViewNX 2 (Transferring Images to a Computer) ..................................... E53

Installing ViewNX 2 ......................................................................................................................... E53

Transferring Images to a Computer ..................................................................................... E53

The Shooting Menu (The Common Shooting Options).................................... E55

Image Quality ..................................................................................................................................... E55

Image Size............................................................................................................................................. E56

The Shooting Menu (j, k, l or m Mode) ........................................................... E57

Picture Control (COOLPIX Picture Control) ...................................................................... E57

Custom Picture Control (COOLPIX Custom Picture Control)................................ E61

White Balance (Adjusting Hue) ............................................................................................... E62

Metering ................................................................................................................................................ E65

Continuous Shooting .................................................................................................................... E66

ISO Sensitivity ..................................................................................................................................... E70

Exposure Bracketing....................................................................................................................... E71

AF Area Mode..................................................................................................................................... E72

Autofocus Mode............................................................................................................................... E75

Flash Exp. Comp. ............................................................................................................................. E75

Noise Reduction Filter ................................................................................................................... E76

Active D-Lighting ............................................................................................................................ E76

Multiple Exposure ............................................................................................................................ E77

Zoom

emory................................................................................................................................... E79

Startup Zoom Position.................................................................................................................. E80

M Exposure Preview ...................................................................................................................... E80

The Movie Menu ............................................................................................................. E81

Movie Options.................................................................................................................................... E81

Autofocus Mode............................................................................................................................... E84

Electronic VR ....................................................................................................................................... E85

Wind Noise Reduction ................................................................................................................. E85

Zoom Microphone.......................................................................................................................... E86

Frame Rate .......................................................................................................................................... E86

The Playback Menu ........................................................................................................ E87

Mark for Wi-Fi Upload .................................................................................................................. E87

Slide Show............................................................................................................................................ E88

Protect..................................................................................................................................................... E89

Rotate Image ..................................................................................................................................... E89

Sequence Display Options ......................................................................................................... E90

Choose Key Picture ........................................................................................................................ E90

Table of Contents

xvii

The Wi-Fi Options Menu............................................................................................... E91

Operating the Text Input Keyboard ..................................................................................... E92

The Location Data Options Menu............................................................................. E93

Location Data Options.................................................................................................................. E93

Updating the A-GPS File .............................................................................................................. E94

Points of Interest (POI) (Recording and Displaying Location Name

Information)......................................................................................................................................... E95

Set Clock from Satellite................................................................................................................. E96

The Setup Menu .............................................................................................................. E97

Table of Contents

Time Zone and Date ...................................................................................................................... E97

Slot Empty Release Lock .............................................................................................................. E99

Monitor Settings ............................................................................................................................ E100

EVF Auto Toggle (Automatically Switching the Display to the

Viewfinder) ........................................................................................................................................ E101

Date Stamp....................................................................................................................................... E102

Vibration Reduction..................................................................................................................... E103

AF Assist ............................................................................................................................................. E104

Digital Zoom ................................................................................................................................... E104

Assign Side Zoom Control....................................................................................................... E105

Sound Settings .............................................................................................................................. E105

Auto Off .............................................................................................................................................. E106

Format Card .................................................................................................................................... E106

Language .......................................................................................................................................... E106

Charge by Computer .................................................................................................................. E107

Toggle Av/Tv Selection ............................................................................................................. E108

Reset File Numbering ................................................................................................................ E108

Peaking ................................................................................................................................................ E109

Reset All ............................................................................................................................................. E109

Firmware Version ......................................................................................................................... E109

Error Me

File Names ....................................................................................................................... E114

Optional Accessories ................................................................................................... E115

Principle Functions of the Controls........................................................................ E116

s............................................................................................................... E110

ssage

xviii

Technical Notes and Index............................................................................... F1

Caring for the Product ...................................................................................................... F2

The Camera............................................................................................................................................... F2

The Battery ................................................................................................................................................ F3

The Charging AC Adapter................................................................................................................ F4

Memory Cards......................................................................................................................................... F5

Cleaning and Storage........................................................................................................ F6

Cleaning...................................................................................................................................................... F6

Storage ........................................................................................................................................................ F6

Troubleshooting ................................................................................................................. F7

Specifications ..................................................................................................................... F16

Approved Memory Cards.......................................................................................................... .... F20

USER LICENSE AGREEMENT FOR LOCATION NAME DATA ................................. F22

Index...................................................................................................................................... F28

Table of Contents

xix

Parts of the Camera

Flash raised

1 Eyelet for camera strap

....................... 9

Power switch/power-on lamp (charge lamp)

..........................11, 14, 18

3 w (function) button

... 45,

E117

4 Mode dial

.......................................... 16,

5 Microphone (stereo)

......... 54,

E32

6 Flash

.............................................................. 36

7 m (flash pop-up) button

.................. 36

8 Micro-USB connector

............... 11,

HDMI micro connector (Type D)

....................................................................... 61

Connector cover

..............................11,

11 N-Mark (NFC antenna)

.............

E46

Power connector cover (for optional AC adapter)

.............

E115

Shutter-release button

.........................................................17,

E117

Zoom control ........................................20

f : wide-angle ...................20

, 22

g : telephoto ......................20

, 22

h : thumbnail playback

..................................................... E24

i : playback zoom .........E23

Self-timer lamp

...................................... 38

Red-eye reduction lamp ................37

AF-assist illuminator..........................57

16 Lens

The Camera Body

1 4 1

15 1612

Parts of the Camera

1 p (snap-back zoom) button ......21

Side zoom control

...............................20

f : wide-angle ...........................20

g : telephoto.............................. 20

3 Speaker

.......................................57

, E36

4 Diopter adjustment control.........19

5 Positioning antenna................. E40

6 Electronic viewfinder........................19

7 Eye sensor ............................................... 19

8 x (monitor) button .......................19

9 s (display) button......................... 3

b (e movie-record) button

....................................................... 21, E32

Command dial

.........................30, 32, E117, E119

12 Monitor

.................................................. 4

, 13

13 q ( Wi-Fi) button ...............60, E45

14 c (playback) button ......................22

d (menu) button

........................................... 49, 51, 54, 55, 57

16 l (delete) button .............................. 23

k (apply selection) button

.................................50, E116, E119

Rotary multi selector (multi selector)*

.................................25, E116, E118

19 Tr ipod s ocket

Battery-chamber/memory card

slot cover ................................................. 10

3 65 87 11109

19 20

* Also referred to as the “multi selector” in this manual.

12 14

13 17 1815 16

The Monitor

1/25 0

F5.6

25m 0s

840

1/25 0

F5.6

25m 0s

840

4/13 2

0112 . JPG 15/1 1/201 5 1 5:30

The information that is displayed in the monitor during shooting and playback changes depending on the camera’s settings and state of use.

Switching the Information Displayed in the Monitor (s Button)

To switch the information displayed in the monitor during shooting and playback, press the s (display) button.

For Shooting

25m 0s

1/250

1/250 F5.6

F5.6

Show information

Display the image and

the shooting information.

840

Movie frame

Display the range of a

movie in a frame.

C Histogram and Framing Grid for Shooting

Each setting can be set using Monitor settings in the setup menu (A57).

• To display a histogram in j, k, l or m shooting mode, set AF area mode (A52)

to one of the manual options.

• The histogram cannot be displayed in A (auto) mode or some scene modes.

For Playback

1/250

1/250 F5.6

F5.6

25m 0s

840

Hide information

Display the image only.

Parts of the Camera

Display the image and

0112. JPG 15/11/2015 15:30

Show information

photo information.

4/132

Tone level information

Display a histogram,

tone level and shooting

information (A8).

1/250

100

F5.6

1.0

0112.JPG 15/11/2015

15:30:59

(except movies)

4/132

Hide information

Display the image only.

For Shooting

9999

1.0

F5.6

120

1/250

3200

1000

Shooting mode....................................24

Flash mode .............................................36

Focus mode............................................40

Zoom indicator.............................20, 41

Focus indicator.....................................17

Zoom memory .....................................53

Movie options (normal

speed movies).......................................54

Movie options (HS movies)...........54

Image quality.........................................51

Image size................................................51

Easy panorama ....................27, E10

Noise reduction filter........................52

Wind noise reduction....................... 54

Vibration reduction icon ................57

Electronic VR icon...............................54

Exposure indicator .............................32

Flash exp. comp...................................52

Exposure compensation value

...44

Remaining movie recording time

...............................................E32, E33

Ready light ..............................................36

Number of exposures remaining

(still images) .......................... 16, E55

Enable release icon (when no memory card is inserted)

........................................... 57, E99, F9

Parts of the Camera

1000

10 120

mmmmmm

3200

1/250

F5.6

9999

1.0

18 19

2021

99999999

10 10

0 0

1.0 +1.0

F5.6F5.6

120 120

1/2501/250

32003200

10 10

100010001000

mmmmmm

1.01.0

10 102 2

0.70.7

0.30.3

120 120

6060

2223

27 252829

3738

43 42

Aperture value ......................................30

Shutter speed........................................30

ISO sensitivity ........................................52

Charging AC adapter connection indicator

Battery level indicator ......................16

“Date not set” indicator...... 57, F8

Date stamp .............................................57

Travel destination icon ....................57

Location data reception .................59

Log display.....................................E42

Wi-Fi communication

indicator...................................60, E45

White balance .......................................51

COOLPIX Picture Control................51

Active D-Lighting................................52

Continuous shooting

mode............................................ 52, E8

Backlighting (HDR)...............27, E7

Noise reduction burst/single

shot.......................................... E4, E5

Time-lapse movie ..............27, E13

Exposure bracketing........................ 52

Hand-held/tripod .........................E3

Multiple exposure ..............................52

Self-timer indicator ............................38

Smile timer..............................................39

Pet portrait auto release ...38, E8

Parts of the Camera

F5.6F5.6

1/2501/250

12 4356

9999

F5.6

1/250

9999

F5.6

9999

F5.6

1/250

Focus area (target finding AF)

...............................................45, 52, E18

Focus area (center/manual)

............................... 27, 28, 45, 52, E21

Focus area (face detection, pet detection)

..........................39, 45, 52, E8, E19

Focus area (subject tracki ng)

...............................................45, 52, E74

Spot metering area............................52

Center-weighted area......................52

View/hide histograms

....................................................... 3, E100

Framing bord er (Moon or Birdwatching scene mode, or snap-

back zoom)............................... 21, E9

View/hide framing grid

....................................................... 3, E100

Location name information

(POI information)................ 59, E41

1/250

F5.6

9999

1/250

F5.6

9999

910

For Playback

15 /11 /20 15

15 :30

01 12. JPG

99 99/ 999 9

99 99 /9 99 9

1m 0s

Protect icon............................................ 55

Sequence display (when

Individual pictures

is selected)

........................................................56,

Skin softening icon............................ 55

Filter effects icon................................. 55

D-Lighting icon ................................... 55

Quick retouch icon............................ 55

Wi-Fi upload reservation icon

...............................................................E87

Current image number/ total number of images

Movie length or elapsed playback time

Volume indicator........................E36

Enable release icon (when no memory card is inserted)

.......................................................57, E99

Image quality ........................................ 51

Image size ............................................... 51

Movie options ...................................... 54

Easy panorama indicator....... E12

Small picture icon .............................. 55

Crop icon.........................................E23

Easy panorama playback guide

............................................E12, E119

Sequence playback guide

............................................E25, E119

Movie playback guide.............E32

Time of recording .............................. 14

Date of recording............................... 14

Charging AC adapter connection indicator

Battery level indicator ..................... 16

File number and type...........E114

Recorded location data indicator

...........................................

E93

Location name information

(POI information)........................E41

22 21

1234567

0112.JPG 15/11/2015

20 19 18

9999/9999

15:30

9999/9999

1m 0s

Demo mode

12 13

16 17

Parts of the Camera

14 15

Tone level information display

Current image number/ total number of images

Histogram

Ton e le vel

ISO sensitivity........................................ 52

COOLPIX Picture Control............... 51

Image quality/Image size.............. 51

White balance ...................................... 51

Time of recording .............................. 14

Date of recording............................... 14

File number and type...........E114

Exposure compensation value

... 44

Shooting mode ................................... 24

Shutter speed....................................... 30

Aperture value ..................................... 30

You can check for loss of contrast detail in highlights and shadows from the histogram that is displayed, or the flashing display for each tone level. These provide guidelines when adjusting the image brightness with functions such as exposure compensation.

4/132

Parts of the Camera

A histogram is a graph showing the distribution of tones in the image. The horizontal axis corresponds to pixel brightness, with dark tones to the left and bright tones to the right. The vertical axis shows the number of pixels.

The tone level indicates the brightness level. When the tone level to check is selected using the multi selector JK or rotating it, the area of the image that corresponds to the selected tone level flashes.

14 13 12

11 10

1/250

1.0

0112.JPG 15/11/2015

F5.6

15:30:59

100

879

3 4 5

Preparing for Shooting

Attach the strap at two places.

How to Attach the Camera Strap and Lens Cap

Attach the Lens Cap LC-CP29 to the strap, and then attach the strap to the camera.

B Lens Cap

• At times when you are not shooting images, attach the lens cap to the lens to protect it.

• Do not attach anything other than the lens cap to the lens.

Preparing for Shooting

Insert the Battery and Memory Card

Battery latch

Memory card slot

• With the battery’s positive and negative terminals oriented correctly, move

the orange battery latch (3), and fully insert the battery (4).

• Slide the memory card in until it clicks into place (5).

Preparing for Shooting

• Be careful not to insert the battery or memory card upside-down or

backward, as this could cause a malfunction.

B Formatting a Memory Card

The first time you insert a memory card that has been used in another device into this camera, make sure to format it with this camera. Insert the memory card into the camera, press the d button, and select Format card in the setup menu (A57).

Removing the Battery or Memory Card

Turn the camera off and make sure that the power-on lamp and monitor have turned off, and then open the battery-chamber/memory card slot cover.

• Move the battery latch to eject the battery.

• Gently push the memory card into the camera to partially eject the memory

card.

• Be careful when handling the camera, battery, and memory card

immediately after using the camera, as they may become hot.

Charge the Battery

Power-on lamp (charge lamp)

Electrical outlet

USB cable (included)

Charging AC Adapter

1 With the battery installed, connect the camera to an

electrical outlet.

If a plug adapter* is included with your camera, securely connect it to the Charging AC Adapter. Once the two are connected, attempting to forcibly remove the plug adapter could damage the product.

* The shape of the plug adapter varies according to the country or region in

which the camera was purchased. This step can be omitted if the plug adapter comes permanently bonded to the charging AC adapter.

• The power-on lamp (charge lamp) slowly flashes green to indicate that the battery is charging.

• When charging is complete, the power-on lamp turns off. It takes about 3 hours to charge a fully exhausted battery.

• The battery cannot be charged when the power-on lamp quickly flashes green, possibly due to one of the reasons described below.

- The ambient temperature is not suited to charging.

- The USB cable or Charging AC Adapter is not properly connected.

- The battery is damaged.

Preparing for Shooting

2 Disconnect the charging AC adapter from the electrical

outlet and then disconnect the USB cable.

B Notes About the USB Cable

• Do not use a USB cable other than the UC-E21. Using a USB cable other than the UC-E21 could result in overheating, fire or electric shock.

• Make sure that the plugs are properly oriented. Do not insert or remove the plugs at an angle when connecting or disconnecting them.

B Notes About Charging the Battery

Do not, under any circumstances, use another make or model of AC adapter other than Charging AC Adapter EH-71P/EH-71PCH, and do not use a commercially available USB-AC adapter or a battery charger for a mobile phone. Failure to observe this precaution could result in overheating or in damage to the camera.

C Charging Using a Computer or Battery Charger

• You can also charge the battery by connecting the camera to a computer.

• You can use the Battery Charger MH-67P (available separately) to charge the

Preparing for Shooting

battery without using the camera.

Opening and Adjusting the Angle of the Monitor

Changing the orientation of the monitor is useful when shooting with the camera in a high or a low position, or when taking selfies. For normal shooting, fold the monitor against the camera body with the screen facing out (3).

When you are not using or carrying the camera, fold the monitor against the camera body with the screen facing inward to prevent scratches or contamination.

B Notes About the Monitor

When moving the monitor, do not apply excessive force and turn slowly within the monitor’s adjustable range so that the connection will not be damaged.

Preparing for Shooting

Turn the Camera On and Set the Display Language, Date, and Time

When the camera is turned on for the first time, the language-selection screen and the date and time setting screen for the camera clock are displayed.

1 Press the power switch

to turn on the camera.

• The monitor turns on.

• To turn the camera off, press

the power switch again.

Preparing for Shooting

2 Use the multi selector

HI to select the desired language and press the k button.

Language

Български

Čeština

Dansk

Deutsch

English

Español

Cancel

3 Select Yes and press the k button.

4 Select your home time

zone and press the k button.

• Press H to display W

above the map and enable daylight saving time. Press I to disable it.

London, Casablanca

Back

5 Use HI to select the date format and press the k button.

6 Set the date and time, and press

Date and time

the k button.

• Use J K to select a field and then use HI

to set the date and time.

• Select the minute field and press the k

button to confirm the setting.

7 When the confirmation dialog is displayed, use HI to

select Ye s and press the k button.

• When settings are finished, the lens extends.

mhDM Y

15201515 11 10

Edit

C Changing the Language or the Date and Time Setting

• You can change these settings using the Language and Time zone and date settings in the z setup menu (A57).

• You can enable or disable daylight saving time in the z setup menu by selecting Time zone and date followed by Time zone. Enabling day light saving time

moves the clock forward one hour, and disabling it moves the clock back one hour.

C The Clock Battery

• The camera’s clock is powered by a built-in backup battery. The backup battery charges when the main battery is inserted into the camera or when the camera is connected to an optional AC adapter, and it can run the clock for several days after about 10 hours of charging.

• If the camera’s backup battery becomes exhausted, the date and time setting screen is displayed when the camera is turned on. Set the date and time again (A14).

Preparing for Shooting

Basic Shooting and Playback

1/2 50

F5. 6

840

25m 0s

Battery level indicator

Number of exposures remaining

Operations

Shooting with A (Auto) Mode

1 Rotate the mode dial to A.

Basic Shooting and Playback Operations

• The camera is set to A (auto) mode and

general shooting can be performed.

• Press the s (display) button to switch

the information displayed in the monitor during shooting and play back.

• Battery level indicator

b: The battery level is high. B: The battery level is low.

2 Hold the camera steady.

• Keep fingers and other objects away from the lens, flash, AF-assist illuminator,

microphone, and speaker.

1/250

F5.6

25m 0s

840

3 Frame the picture.

Zoom out

Zoom in

Zoom out

p button

1/2 50

F5. 6

Focus area

• Move the zoom control or the side zoom control to change the zoom lens position.

• When the subject is lost at the telephoto zoom position, press the p (snap- back zoom) button to temporarily widen the angle of view so that you can frame the subject more easily.

4 Press the shutter-release

button halfway.

• When the subject is in focus, the focus area or focus indicator is displayed in green.

• When you are using digital zoom, the camera focuses in the center of the frame and the focus area is not displayed.

• If the focus area or focus indicator flashes, the camera is unable to focus. Modify the composition and try pressing the shutterrelease button halfway again.

Basic Shooting and Playback Operations

5 Without lifting your finger, press

the shutter-release button the rest of the way down.

1/250

F5.6

B Notes About Saving Images or Movies

The indicator showing the number of exposures remaining or the indicator showing the remaining recording time flashes while images or movies are being saved. Do

not open the battery-chamber/memory card slot cover or remove the battery or memory card while an indicator is flashing. Doing this could result in

loss of data, or in damage to the camera or the memory card.

C The Auto Off Function

• When no operations are performed for about one minute, the monitor turns off, the camera enters standby mode, and then the power-on lamp flashes. The camera turns off after remaining in standby mode for about three minutes.

• To turn the monitor back on while the camera is in standby mode, perform an operation such as pressing the power switch or shutter-release button.

C When Using a Tripod

• We recommend using a tripod to stabilize the camera in the following situations:

- When shooting in dim lighting with the flash mode set to W (off)

- When the zoom is at a telephoto position

• When using a tripod to stabilize the camera during shooting, set Vibration

Basic Shooting and Playback Operations

reduction to Off in the setup menu (A57) to prevent potential errors caused by this function.

Using the Flash

In situations where a flash is needed, such as in dark locations or when the subject is backlit, press the m (flash pop-up) button to raise the flash.

• When not using the flash, gently push to

lower the flash until it clicks shut.

Switching Between the Monitor and Viewfinder

Viewfinder

x button

Diopter adjustment control

You can use the viewfinder when bright light under the open sky makes it difficult to see the monitor.

• When you bring your face close to the

viewfinder, the eye sensor responds to it and the viewfinder turns on while the monitor turns off (default setting).

• You can also press the x button to

switch the display between the monitor and viewfinder.

Diopter Adjustment of the Viewfinder

When the image in the viewfinder is difficult to see, adjust by rotating the diopter adjustment control while looking through the viewfinder.

• Take care not to scratch your eye with

your fingertips or nails.

B Notes About Checking and Adjusting Image Colors

Use the monitor on the back of the camera because the monitor has higher color reproducibility than the viewfinder.

Basic Shooting and Playback Operations

Using the Zoom

Zoom out Zoom in

Optical zoom

Digital zoom

When you move the zoom control, the zoom lens position changes.

• To zoom in: Move toward g

• To zoom out: Move toward f

• Rotating the zoom control all the way in either

direction adjusts the zoom quickly.

• The zoom can also be operated by moving the side

zoom control toward g or f. The function of the side zoom control can be set in the Assign side zoom control in the setup menu (A57).

• A zoom indicator is displayed on the shooting

screen when the zoom control is moved.

• Digital zoom, which allows you to further magnify

the subject up to approximately 4× the maximum optical zoom ratio, can be activated by moving and holding the zoom control toward g when the camera is zoomed in to the maximum optical zoom

Basic Shooting and Playback Operations

position.

C Digital Zoom

The zoom indicator changes to blue when the digital zoom is activated, and it changes to yellow when the zoom magnification is increased further.

• Zoom indicator is blue: Image quality is not noticeably reduced by using the Dynamic Fine Zoom.

• Zoom indicator is yellow: There may be cases in which image quality is noticeably reduced.

• The indicator remains blue across a wider area when the image size is smaller.

• The zoom indicator may not change to blue when using certain continuous

shooting settings or other settings.

Using the Snap-back Zoom

840

F5.6

1/250

Framing border

When the subject is lost at the telephoto zoom position, press the p (snap-back zoom) button to temporarily widen the angle of view so that you can frame the subject more easily.

• While pressing the p button, frame the

subject inside the framing border of the shooting screen. To widen the angle of view further, move the zoom control toward f while pressing the p button.

• Release the p button to return to the

original zoom position.

• Snap-back zoom is not available during

movie recording.

1/250

F5.6

840

The Shutter-release Button

To set focus and exposure (shutter speed and

Press halfway

aperture value), press the shutter-release button lightly until you feel a slight resistance. Focus and exposure remain locked while the shutter-release button is pressed halfway.

Press the shutter-release button all the way to

Press all the way

release the shutter and take a picture. Do not use force when pressing the shutterrelease button, as this may result in camera shake and blurred images. Press the button gently.

Recording Movies

Display the shooting screen and press the b (e movie-record) button to start recording a movie. Press the b (e) button again to end recording.

Basic Shooting and Playback Operations

Play Back Images

15/ 11/20 15 15:3 0

Display the previous image

Display the next image

1/1 32

1 Press the c (playback)

button to enter playback mode.

• If you press and hold down the

c button while the camera is turned off, the camera turns on in playback mode.

2 Use the multi selector to select

an image to display.

• Press and hold down HIJK to scroll

through the images quickly.

• Images can also be selected by rotating

Basic Shooting and Playback Operations

the multi selector.

• Press the s button to switch between

showing and hiding the photo information or shooting information that is displayed in the monitor.

• To play back a recorded movie, press the

k button.

• To return to shooting mode, press the c

button or shutter-release button.

• Move the zoom control toward

g (i) in full-frame playback mode to zoom in on an image.

0112. JPG

15/11/2015 15:30

4/132

• In full-frame playback mode, move the zoom control toward f (h) to switch to thumbnail playback mode and display multiple images on the screen.

1/132

Delete Images

1 Press the l (delete)

button to delete the image currently displayed in the monitor.

2 Use the multi selector HI to

select the desired deletion method and press the k button.

• To exit without deleting, press the d button.

• When Erase selected images is selected, see “The Image Selection Screen” (A56).

Delete

Current image

Erase selected images

All images

3 Select Yes and press the k

button.

• Deleted images cannot be recovered.

B Deleting Images Captured Continuously (Sequence)

• Images captured continuously are saved as a sequence, and only the first image of the sequence (the key picture) is displayed in playback mode (default setting).

• If you press the l button while a key picture is displayed for a sequence of images, all images in the sequence are deleted.

• To delete individual images in a sequence, pr ess the

k button to display them one at a time and press the l button.

C Deleting the Image Captured While in Shooting Mode

When using shooting mode, press the l button to delete the last image that was saved.

Erase 1 image?

Yes

0004. JPG

0004. JPG 15/11/2015 15:30

Basic Shooting and Playback Operations

4/132

Changing the Shooting Mode

You can change to the following shooting modes by rotating the mode dial.

• A (Auto) mode

Used for general shooting.

• y, X, s, c (Scene) modes

Camera settings are optimized according to the scene that you select.

Basic Shooting and Playback Operations

- y: Press the d button and select a scene. When using Scene

auto selector, the camera automatically recognizes the shooting scene

when you frame a picture, making it easier to take pictures in accordance with the scene. When using time-lapse movie, the camera automatically captures still images at a specified interval to create time-lapse movies that are approximately 10 seconds long.

- X (night landscape): Use this mode to shoot night landscapes.

- s (night portrait): Use this mode to shoot evening and night portraits that

include background scenery.

- c (landscape): Use this mode to shoot landscapes.

• u (Special effects) mode

Effects can be applied to images during shooting. Press the d button and select an effect.

• j, k, l, m modes

Select these modes for greater control over shutter speed and aperture value.

• M (User settings) mode

Setting combinations that are frequently used for shooting can be saved. The saved settings can be immediately retrieved for shooting simply by rotating the mode dial to M.

Functions That Can Be Set Using the Multi Selector (for Shooting)

When the shooting screen is displayed, you can press the multi selector H (m) J (n) I (p) K (o) to set the functions described below.

• m Flash mode

When the flash is raised, the flash mode can be set according to shooting conditions.

• n Self-timer/Smile timer

The self-timer can be selected from 10 seconds or 2 seconds. When smile timer is selected, the camera detects a smiling face and automatically releases the shutter.

• p Focus mode

According to the distance to the subject, A (autofocus), D (macro closeup) or B (infinity) can be set. When the shooting mode is j, k, l, m or M,

u, or Sports, Fireworks show, Bird-watching or Time-lapse movie (night sky, star trails) scene mode, E (manual focus) can be set.

• o Exposure compensation

You can adjust overall image brightness.

The functions that can be set vary depending on the shooting mode.

Basic Shooting and Playback Operations

Shooting Features

A (Auto) Mode

Used for general shooting.

• The camera detects the main subject and

focuses on it (target finding AF). If a human face is detected, the camera automatically sets focus priority on it.

• See “Focusing” (E18) for more information.

Functions Available in A (Auto) Mode

• Flash mode (A36)

• Self-timer (A38)

• Smile timer (A39)

• Focus mode (A40)

• Exposure compensation (A44)

• Shooting menu (A51)

Shooting Features

Scene Mode (Shooting Suited to Scenes)

X Night landscape (E3)

1, 2

, s Night portrait

(E3), c Landscape (E4)

1, 2

Rotate the mode dial to X, s or c and take pictures.

y (Scene)

Press the d button to display the scene menu and select one of the following scenes using the multi selector.

Scene auto selector (default setting)

(E4)

l Museum (E6)

b Portrait m Fireworks show (E6)

d Sports (E5)

n Black and white copy (E6)

f Party/indoor (E5)

o Backlighting (E7)

Z Beach

p Easy panorama (E10)

z Snow

O Pet portrait (E8)

h Sunset

1, 2, 3

g Moon (E9)

1, 2, 3

i Dusk/dawn

1, 2, 3

L Bird-watching (E9)

k Close-up (E5) i Time-lapse movie (E13)

3, 4

u Food (E6)

Sunset

Snow

Beach

Party/indoor

Sports

Portrait

Sunset

Snow

Beach

Party/indoor

Sports

Portrait

Scene auto selector

When a scene is selected, camera settings are automatically optimized for the selected scene.

The camera focuses on the area in the center of the frame. The position of the area cannot be moved.

The camera focuses at infinity.

Use of a tripod is recommended. Set Vibration reduction to Off in the setup menu (A57) when using a tripod to stabilize the camera during shooting.

The camera automatically captures still images at a specified interval to create time-lapse movies that are approximately 10 seconds long.

Shooting Features

Special Effects Mode (Applying Effects When

Special eects

Image size

Image quality

High ISO monochromeHigh ISO monochrome

Selective colorSelective color

Low keyLow key

High keyHigh key

High-contrast mono.High-contrast mono.

Nostalgic sepiaNostalgic sepia

Soft

Special eects

High ISO monochrome

Selective color

Low key

High key

High-contrast mono.

Nostalgic sepia

Shooting)

Effects can be applied to images during shooting.

Press the d (menu) button to display the special effects menu and select an

Shooting Features

effect using the multi selector.

Type Description

Soft

(default

setting)

Nostalgic sepia

High-contrast mono.

High key Gives the entire image a bright tone.

Low key Gives the entire image a dark tone.

Selective color

High ISO monochrome

Softens the image by adding a slight blur to the entire image.

Adds a sepia tone and reduces the contrast to simulate the

qualities of an old photograph.

Creates a black-and-white photograph with a clear contrast.

Keeps only a selected color and makes other colors blackand-white.

Creates monotone (black-and-white) images by intentionally taking pictures with high ISO sensitivity. This setting is effective when shooting subjects in low lighting conditions.

• The images captured may contain noise (randomlyspaced bright pixels, spots or lines).

Type Description

1/2501/250 F5.6F5.6

Save

Cross process

*Certain Movie options (A54) are not available.

Creates images with an unusual hue by converting a positive color image into negative or negative color image into positive.

• The camera focuses on the area in the center of the frame. The position of the area cannot be moved.

• When Selective color or Cross process is selected, rotate the command dial to select the desired color, and press the k button to apply the color. To change the color selection, press the k button again.

Functions Available in Special Effects Mode

• Flash mode (A36)

• Self-timer (A38)

• Focus mode (A40)

• Exposure compensation (A44)

• Shooting menu (A51)

Shooting Features

j, k, l, m

1/2 50

F5. 6

25m 0s

840

Multi selector

Command dial

Shutter speed

Aperture value

Modes (Setting the Exposure for

Shooting)

Images can be shot with greater control by setting the shooting menu (A51) items in addition to setting the shutter speed or aperture value manually according to shooting conditions and requirements.

• The focus area for autofocus differs depending on the setting of AF area mode (A52).

• When set to Target finding AF (default setting), the camera detects the main subject and focuses on it. If a human face is detected, the camera automatically sets focus priority on it.

Rotate the command dial or multi selector to set the shutter speed and aperture value.

Shooting Features

1/250

1/250 F5.6

F5.6

25m 0s

840

Exposure mode

Programmed auto

(A32)

Shutter-priority

auto (A32)

Aperture-priority

auto (A32)

m Manual (A32)

C More Information

See “Toggle Av/Tv selection” (A58) for more information.

Shutter speed

Automatically adjusted (flexible program is enabled by the command dial).

Adjusted by the command dial.

Automatically adjusted.

Adjusted by the command dial.

Aperture value

Automatically adjusted.

Adjusted by the multi selector.

Exposure

The procedure for shooting images at the desired brightness (exposure) by adjusting the shutter speed or aperture value is called “determine exposure.” The sense of dynamism and amount of background defocus in images to be shot vary depending on the combinations of shutter speed and aperture value even if the exposure is the same.

Adjusting the Shutter Speed

Faster 1/1000 s Slower 1/30 s

Adjusting the Aperture Value

Shooting Features

Larger aperture (Small f-number)

f/3.3

Smaller aperture (Large f-number)

f/7.6

C The Control Range of the Shutter Speed

The control range of the shutter speed differs depending on the zoom position, aperture, or ISO sensitivity setting.

C Aperture Value (F-number) and Zoom

Large apertures (expressed by small fnumbers) let more light into the camera, and small apertures (large f-numbers) let less light. The aperture value of this camera also changes depending on the zoom position.

j (Programmed auto)

1/2 50

F5. 6

25m 0s

840

1/2 50

F5. 6

25m 0s

840

1/2 50

F5. 6

25m 0s

840

1/2 50

F5. 6

840

25m 0s

Exposure indicator

Use for automatic control of the exposure by the camera.

•

Different combinations of shutter speed and aperture value can be selected without changing the exposure by rotating the

1/250

command dial (“flexible program”). While

1/250 F5.6

flexible program is in effect, a flexible program mark (A) is displayed next to the mode indicator (j) in the upper left of the monitor.

• To cancel flexible program, rotate the command dial until the flexible program mark (A) is no longer displayed. Changing the shooting mode, or turning off the camera, also cancels flexible program.

k (Shutter-priority auto)

Use to shoot fast-moving subjects at a fast shutter speed, or use to emphasize the movements of a moving subject at a slow shutter speed.

• The shutter speed can be adjusted by rotating the command dial.

Shooting Features

1/250

1/250 F5.6

l (Aperture-priority auto)

Use to bring subjects including both the foreground and background into focus or blur the subject’s background intentionally.

• The aperture value can be adjusted by rotating the multi selector.

1/250

1/250 F5.6

m (Manual)

Use to control the exposure according to shooting requirements.

• When adjusting the aperture value or shutter speed, the degree of deviation from the exposure value measured by the camera is displayed in the exposure indicator of the monitor. The degree of deviation in the exposure indicator is displayed in EVs (–2 to +2 EV in increments of 1/3 EV).

• The shutter speed can be adjusted by rotating the command dial and the aperture value can be adjusted by rotating the multi selector.

1/250

1/250 F5.6

F5.6

25m 0s

840

25m 0s

840

25m 0s

840

25m 0s

840

B Notes About Shooting

• When zooming is performed after the exposure is set, exposure combinations or

aperture value may be changed.

• When the subject is too dark or too bright, it may not be possible to obtain the

appropriate exposure. In such cases, the shutter speed indicator or aperture value indicator flashes when the shutter-release button is pressed halfway (except when the m mode is used). Change the shutter speed setting or aperture value.

B Notes About ISO Sensitivity

When ISO sensitivity (A52) is set to Auto (default setting) or Fixed range auto, the ISO sensitivity in m mode is fixed at ISO 100.

Functions Available in j, k, l, m Modes

• Flash mode (A36)

• Self-timer (A38)

• Smile timer (A39)

• Focus mode (A40)

• Exposure compensation (A44)

• Shooting menu (A51)

• Functions That Can Be Set Using the w (Function) Button (A45)

Shooting Features

M (User Settings) Mode

Setting combinations that are frequently used for shooting (User settings) can be saved in M. Shooting is possible in j (programmed auto), k (shutterpriority auto), l (aperture-priority auto) or m (manual).

Rotate the mode dial to M to retrieve the settings saved in Save user settings.

• Frame the subject and shoot with these settings, or change the settings as required.

• The setting combinations that are retrieved when the mode dial is rotated to M can be changed as many times as you want in Save user settings.

The following settings can be saved.

General Settings

• Shooting modes j, k, l, m (A30) • Focus mode (A40)

• Zoom position (A20) • Exposure compensation (A44)

Shooting Features

• Flash mode (A36) • Fn button (A45)

• Self-timer (A38)

Shooting menu

• Image quality (A51) • AF area mode (A52)

• Image size (A51) • Autofocus mode (A52)

• Picture Control (A51) • Flash exp. comp. (A52)

• Custom Picture Control (A51) • Noise reduction filter (A52)

• White balance (A51) • Active D-Lighting (A52)

• Metering (A52) • Multiple exposure (A52)

• Continuous (A52) • Zoom memory (A53)

• ISO sensitivity (A52) • Startup zoom position (A53)

• Exposure bracketing (A52) • M exposure preview (A53)

Saving Settings in M Mode (Save User Settings)

The frequently used settings for shooting can be changed and saved in M.

1 Rotate the mode dial to one of j, k, l or m shooting

mode that you want to save in M mode.

• You can also rotate the mode dial to M to save settings (at the time of purchase, the default setting of j shooting mode is saved).

2 Change to a frequently used combination of shooting

settings.

• See A34 for settings details.

• The flexible program (when set to j), shutter speed (when set to k or m), or

aperture value (when set to l or m) settings will also be saved.

3 Press the d (menu) button to

display the shooting menu.

4 Use the multi selector HI to

select Save user settings, and press the k button.

• The current settings are saved.

B The Clock Battery

If the internal clock battery (A15) is exhausted, the settings saved in M will be reset. Writing down any important setting is recommended.

Noise reduction lter

Active D-Lighting

Multiple exposure

Save user settings

Reset user settings

Zoom memory

Shooting Features

C Resetting M (User Settings) Mode

If Reset user settings is selected in the shooting menu, the settings that are saved in the user settings are restored to their default values. The shooting mode is set to j.

Flash Mode

1/2 50

F5. 6

25m 0s

840

Ready light

When the flash is raised, the flash mode can be set according to shooting conditions.

1 Press the m (flash pop-up) button

to raise the flash.

• When the flash is lowered, flash operation is disabled and S is displayed.

2 Press the multi selector H (m).

Shooting Features

3 Select the desired flash mode

(A37) and press the k button.

• If the setting is not applied by pressing the

k button within a few seconds, the selection will be canceled.

B The Ready Light

While the flash is charging, q flashes. The camera cannot shoot images. If charging is complete, q is displayed steadily when you press the shutter-release button halfway.

Auto

1/250

1/250 F5.6

F5.6

25m 0s

840

Available Flash Modes

Auto

The flash fires when necessary, such as in dim lighting.

• The flash mode indicator is only displayed immediately after setting in the shooting screen.

Auto with red-eye reduction/Red-eye reduction

Reduce red-eye in portraits caused by the flash (A37).

• When Red-eye reduction is selected, the flash fires whenever a picture is taken.

Fill flash/Standard flash

The flash fires whenever a picture is taken.

Slow sync

Suited to evening and night portraits that include background scenery. Fill flash fires to illuminate the main subject; slow shutter speeds are used to capture background at night or under dim lighting.

Rear-curtain sync

Fill flash fires just before the shutter closes, creating the effect of a stream of light behind moving subjects.

C The Flash Mode Setting

• The available flash modes differ depending on the shooting mode. The flash mode setting may not be available in some shooting modes.

• When the shooting mode is j, k, l, m or M, Auto cannot be selected.

• The setting applied in the following situations is saved in the camera’s memory

even after the camera is turned off.

- When shooting mode j, k, l or m is used

- When V (auto with red-eye reduction) is selected in A (auto) mode

C Auto with Red-eye Reduction/Red-eye Reduction

The red-eye reduction lamp glows before the main flash to reduce the red-eye effect. In addition, if the camera detects red-eye while saving an image, the affected area is processed to reduce red-eye before the image is saved. Note the following when shooting:

• Because the red-eye reduction lamp glows, more time than usual is required until

the shutter is released after you press the shutter-release button.

• More time than usual is required to save images.

• Red-eye reduction may not produce the desired results in some situations.

• In rare cases, red-eye reduction may be applied to areas of an image unnecessarily.

In these cases, select another flash mode and take the picture again.

Shooting Features

Self-timer

1/2 50

F5. 6

The camera is equipped with a self-timer that releases the shutter 10 seconds or 2 seconds after you press the shutter- release button. Set

Off

in t he set up men u (A57) when using a tripod to stabil ize the camera during

shooting.

Vibration reduction

1 Press the multi selector J (n).

2 Select the desired self-timer

mode, and press the k button.

• n10s (10 seconds): Use on important

occasions, such as weddings.

• n2s (2 seconds): Use to prevent camera

Shooting Features

shake.

• If the setting is not applied by pressing the

k button within a few seconds, the selection will be canceled.

• When the shooting mode is Pet portrait scene mode, Y (pet portrait auto

release) is displayed (E8). The self-timer cannot be used.

3 Frame the picture and press the shutter-release button

halfway.

• Focus and exposure are set.

4 Press the shutter-release

button the rest of the way down.

•

Countdown starts. The self-timer lamp flashes and then glows steadily about one second before the shutter is released.

• When the shutter is released, the

self-timer is set to OFF.

• To stop the countdown, press

the shutter-release button again.

1/250

1/250 F5.6

F5.6

Smile Timer (Shooting Smiling Faces

25m 0s

1/2 50

F5. 6

840

Automatically)

When the camera detects a smiling face, you can take a picture automatically without pressing the shutter-release button.

• This function can be used when the shooting mode is A (auto), j, k, l, m

or M, or Portrait or Night portrait scene mode.

1 Press the multi selector J (n).

• Change any flash mode, exposure, or

shooting menu settings before pressing J.

2 Select a (smile timer), and press

Smile timer

the k button.

• If the setting is not applied by pressing the

k button within a few seconds, the selection will be canceled.

3 Frame the picture and wait for the

subject to smile without pressing the shutter-release button.

• Point the camera at a human face.

• If the camera detects that the face framed

by the double border is smiling, the shutter is automatically released.

• Whenever the camera detects a smiling face, it automatically releases the shutter.

1/250

F5.6

4 End automatic shooting.

• To end automatic shooting with smile timer, return to step 1 and select OFF.

B Notes About Smile Timer

Under some shooting conditions, the camera may be unable to detect faces or detect smiles (E19). The shutter-release button can also be used for shooting.

C When the Self-timer Lamp Flashes

When using smile timer, the self-timer lamp flashes when the camera detects a face and flashes quickly immediately after the shutter is released.

25m 0s

840

Shooting Features

Focus Mode

Set the focus mode according to the distance to the subject.

1 Press the multi selector I (p).

2 Select the desired focus mode and

press the k button.

• If the setting is not applied by pressing the

k button within a few seconds, the selection will be canceled.

Shooting Features

Autofocus

Available Focus Modes

Autofocus

The camera automatically adjusts the focus according to the distance to the subject. Use when the distance from the subject to the lens is 50 cm (1 ft 8 in.) or more, or 2.0 m (6 ft 7 in.) or more at the maximum telephoto zoom position.

• The focus mode icon on the shooting screen is displayed only immediately after the setting is made.

Macro close-up

Set when taking close-up pictures. When the zoom ratio is set to a position where F and the zoom indicator is displayed in green, the camera can focus on subjects as close as approximately 10 cm (4 in.) from the lens. When the zoom is at the position where G is displayed, the camera can focus on subjects as close as approximately 1 cm (0.4 in.) from the lens.

Infinity

Use when shooting distant scenes through window glass or when shooting landscapes. The camera automatically adjusts the focus near infinity.

• The camera may not be able to focus on nearby objects.

Infinity

Use when shooting the sky and the fireworks show.

Manual focus

The focus can be adjusted on any subject at a distance from approximately 1 cm (0.4 in.) to infinity (∞) from the lens (A42). The closest distance at which the camera can focus varies depending on the zoom position.

B Notes About Shooting with the Flash

The flash may be unable to light the entire subject at distances of less than 50 cm (1 ft 8 in.).

C Focus Mode Setting

• The setting may not be available with some shooting modes (E15).

• For sh ooting mode s j, k, l and m, the setting is saved in the camera’s memory

even after the camera is turned off.

Shooting Features

Using Manual Focus

1/2 50

F5. 6

840

0.3

Peaking level

1/2 50

F5. 6

25m 0s

840

Available when the shooting mode is j, k, l, m or M, special effects mode, or Sports, Fireworks show, Bird-watching or Time-lapse movie (night sky, star trails) scene mode.

1 Press the multi

selector I (p), select E (manual focus), and then press the k button.

2 Use the multi selector to adjust

the focus while checking the enlarged view.

• An enlarged view of the center area of the

image is displayed. Press J to switch the view between 2× and 4×.

Shooting Features

• Rotate the multi selector clockwise to focus on near subjects, or counterclockwise to focus on far subjects. The focus can be adjusted in higher detail by rotating the multi selector slowly or rotating the command dial.

• When K is pressed, the camera focuses on the subject in the center of the frame with autofocus. The manual focus can be operated after the camera focuses with autofocus.

• Focusing is assisted by highlighting areas that are in focus in white (peaking) (A43). Press HI to adjust the peaking level.

• Press the shutter-release button halfway to confirm the composition of the picture. Press the shutter-release button all the way to take the picture.

3 Press the k button.

• The set focus is locked.

• Press the shutter-release button all the way

to take the picture.

• To readjust the focus, press the k button to display the screen in step 2.

Manual focus

×4×

1/250

F5.6

1/250

1/250 F5.6

F5.6

0.3

1AF

840

25m 0s

840

C E (Manual Focus)

• The digits displayed for the gauge on the right of the monitor in step 2 serve as a

guideline for the distance to a subject that is in focus when the gauge is near the center.

• The actual range at which the subject can be in focus varies depending on the aperture value and zoom position. To see whether the subject is in focus, check the image after shooting.

• Set Assign side zoom control in the setup menu (A57) to Manual focus to focus by using the side zoom control instead of the multi selector in step 2.

C Peaking

• The range of the contrast level considered to be in focus can be changed by adjusting the peaking level. It is effective to set the level low for high contrast subjects, and high for low contrast subjects.

• Peaking highlights high contrast areas of the image in white. Depending on the shooting conditions, highlighting may not work properly or areas that are not in focus may be highlighted.

• You can disable the peaking display using Peaking in the setup menu (A57).

Shooting Features

Exposure Compensation (Adjusting

Histogram

Guide

Brightness)

You can adjust overall image brightness.

1 Press the multi selector K (o).

2 Select a compensation value and

press the k button.

• To brighten the image, set a positive (+) value.

• To darken the image, set a negative (–) value.

Shooting Features

• The compensation value is applied, even without pressing the k button.

C Exposure Compensation Value

• If the setting is applied in j, k or l mode, it will remain saved in the camera’s

memory even after the camera is turned off.

• When the shooting mode is Fireworks show scene mode (E6) or m (manual) (A32), exposure compensation cannot be used.

• When the exposure compensation is set while using a flash, the compensation is applied to both the background exposure and to the flash output.

C Using the Histogram

A histogram is a graph showing the distribution of tones in the image. Use as a guide when using exposure compensation and shooting without the flash.

• The horizontal axis corresponds to pixel brightness, with dark tones to the left and bright tones to the right. The vertical axis shows the number of pixels.

• Increasing exposure compensation value shifts tone distribution to the right, and decreasing it shifts tone distribution to the left.

Exposure compensation

+2.0

-0.3

-2.0

Functions That Can Be Set with the Fn

Apply selection

(Function) Button

The following functions can be also set by pressing the w (function) button instead of displaying the corresponding menu by pressing the d (menu) button.

• This function can be used when the shooting mode is j, k, l, m or M.

Image quality (A51) Continuous (A52) Image size (A51) ISO sensitivity (A52) Picture Control (A51) AF area mode (A52) White balance (A51) Vibration reduction (A57) Metering (A52)

1 Press the w (function) button when the shooting screen

is displayed.

• The U Fn button function menu or the setting items of the function

(default setting is Continuous) that was last assigned to the w (function) button can be selected.

Single

2 Use the multi selector to select a

menu item.

• To assign another function, select the U

Fn button function menu and press the

k button. Then, select the desired function from the displayed menu.

3 After you finish assigning the function, press the k button

or w button.

• The camera returns to the shooting screen.

Shooting Features

Functions That Cannot Be Used Simultaneously When Shooting

Some functions cannot be used with other menu settings.

Flash mode

Self-timer/ Smile timer

Focus mode

Shooting Features

Image quality

Image size

Picture Control

White balance

Metering

Restricted

function

Setting Description

Focus mode (A40)

Continuous (A52)

Exposure bracketing (A52)

Focus mode (A40)

AF area mode (A52)

Smile timer (A39)

AF area mode (A52)

Continuous (A52)

AF area mode

)

(A52 Active D-Lighting

(A52) Picture Control

(A51)

Active D-Lighting (A52)

When B (infinity) or Q (infinity) is selected, the flash is not available.

The flash is not available (except for Intvl timer shooting).

The flash is not available.

When a setting other than A (autofocus) is selected, smile timer is set to OFF.

When Subject tracking is selected, the self-timer/smile timer is not available.

When smile timer is selected, the focus mode is fixed at A (autofocus).

When Subject tracking is selected, E (manual focus) is not available.

When Pre-shooting cache is selected,

Image quality is fixed at Normal.

Image size is set as follows depending on

the continuous shooting setting:

• Pre-shooting cache:

A (image size: 1280 × 960 pixels)

• Continuous H: 120 fps:

f (image size: 640 × 480 pixels)

• Continuous H: 60 fps:

O (image size: 1920 × 1080 pixels)

•Multi-shot 16:

D (image size: 2560 × 1920 pixels)

en Subject tracking is selected,

Wh Monochrome cannot be set.

When using Active D-Lighting, Contrast in manual adjustment cannot be adjusted.

When Monochrome is selected, White balance is fixed at Auto (normal).

When Active D-Lighting is set to any mode other than Off, Metering is reset to Matrix.

Restricted

function

Continuous/ Exposure bracketing

ISO sensitivity

AF area mode

Setting Description

Continuous (A52)/Exposure bracketing (A52)

Self-timer (A38)

Smile timer (A39)

Picture Control (A51)

Multiple exposure (A52)

Continuous (A52)

Smile timer (A39)

Focus mode (A40)

Picture Control (A51)

White balance (A51)

Continuous and Exposure bracketing are not available simultaneously.

• When self-timer is used, a single image is shot even if Continuous H, Continuous L, Pre-shooting cache, or BSS has been set. If Intvl timer shooting is set, shooting finishes automatically after one image is shot.

• Exposure bracketing is not available.

• When the camera detects smiling faces

and the shutter is released, only one image is shot. If Intvl timer shooting is set, shooting finishes automatically after one image is shot.

• Exposure bracketing is not available.

When Monochrome is selected, Exposure bracketing is not available.

Not available simultaneously.

When Pre-shooting cache, Multi-shot

16, Continuous H: 120 fps or Continuous H: 60 fps is selected, ISO sensitivity is fixed at Auto.

The camera captures images using face detection regardless of the applied AF area

mode option.

• When a setting other than Subje tracking is selected and B (infinity) is

selected as the focus mode for shooting, the camera focuses at infinity regardless of the applied AF area mode option.

• When set to E (manual focus), the AF area mode cannot be set.

When Monochrome is selected, Subject tracking cannot be set.

When Target finding AF is selected, and if the white balance is set to Preset manual,

Incandescent, Fluorescent or Choose color temp., or fine adjustment of white

balance is performed, the camera focuses on a face or selects one or more of the 9 focus areas containing the subject closest to the camera.

Shooting Features

Autofocus mode

Active DLighting

Multiple exposure

Monitor settings

Shooting Features

Date stamp

Digital zoom

Shutter sound

Restricted

function

Setting Description

Smile timer (A39)

Focus mode (A40)

ISO sensitivity

52)

(

Continuous (A52)

Exposure bracketing (

AF area mode (A52)

Continuous (A52)

Smile timer (A39)

Continuous (A52)

AF area mode (A52)

Zoom memory (A53)

Continuous (A52)

Exposure bracketing (

When smile timer is selected, the autofocus mode operates using the Single AF setting.

When the focus mode is set to B (infinity), the autofocus mode operates using the Single AF setting.

When ISO sensitivity is set to 1600, 3200, or 6400, Active D-Lighting is not available.

Not available simultaneously.

52)

• When Subject tracking is selected and after the subject has been registered (during subject tracking), the histogram is not displayed.

• The histogram is not displayed when Target finding AF is selected.

When

Pre-shooting cache, Continuous H:

120 fps

Continuous H: 60 fps

date and time cannot be stamped on images. When smile timer is selected, digital zoom

is not available.

When Multi-shot 16 is selected, digital zoom is not available.

When Subject tracking is selected, digital zoom is not available.

When Zoom memory is set to On, digital zoom is not available.

When Continuous H, Continuous L, Pre-

shooting cache, Continuous H: 120 fps, Continuous H: 60 fps, BSS, or Multi-shot 16 is selected, shutter sound is disabled.

Shutter sound is disabled.

52)

is selected,

B Notes About Digital Zoom

• Depending on the shooting mode or the current settings, digital zoom may not be

available (E104).

• When digital zoom is in effect, selectable options for AF area mode or metering mode are restricted.

Functions That Can Be Set with

F5.6

840

the d (Menu) Button

You can set the menus listed below by pressing the d (menu) button.

• A, y, X, s, c, u, j, k, l, m, M Shooting menu

Available by pressing the d button when the shooting screen is displayed. Allows you to change the settings for shooting such as the combination of the image size and image quality. Menu icons and options that can be set differ depending on the shooting mode.

• c Playback menu

Available by pressing the d button when viewing images in full-frame playback mode or thumbnail playback mode. Allows you to edit images, play slide shows, etc.

• e Movie menu

Available by pressing the d button when the shooting screen is displayed. Allows you to change movie recording settings.

• q Wi-Fi options menu

Allows you to configure Wi-Fi settings for connecting the camera and a smart device.

• z Location data options menu

Allows you to configure settings for the location data functions. When Record location data in Location data options is set to On, the camera starts receiving signals from the positioning satellites.

• z Setup menu

Allows you to adjust basic camera functions such as date and time, display language, etc.

1 Press the d (menu)

button.

• The menu is displayed.

25m 0s25m 0s

1/2501/250 F5.6

F5.6

840

Functions That Can Be Set with the d (Menu) Button

2 Press the multi selector

Menu icons

Vibration reduction

Date stamp

EVF auto toggle

Monitor settings

Slot empty release lock

Time zone and date

• The current menu icon is displayed in yellow.

Shooting menu

Image quality

Image size

Picture Control

Custom Picture Control

White balance

Metering

3 Select a menu icon and

press the k button.

• The menu options become selectable.

4 Select a menu option

and press the k button.

• Certain menu options

Functions That Can Be Set with the d (Menu) Button

cannot be set depending on the current shooting mode or the state of the camera.

• Items can also be selected by rotating the multi selector.

5 Select a setting and

press the k button.

• The setting you selected is applied.

• When you are finished using the menu, press the d button.

• When a menu is displayed, you can switch to shooting mode by pressing the shutter-release button or b (e) button.

Time zone and date

Slot empty release lock

Monitor settings

EVF auto toggle

Date stamp

Vibration reduction

Date stamp

Date

Date and time

O

Set up

The Shooting Menu

Enter shooting mode M d button

Image quality

Image size

Picture Control

Custom Picture Control

White balance

Metering

Common Options

Option Description A

Image quality

Image size

For j, k, l, m, M modes

Option Description A

Picture Control (COOLPIX Picture Control)

Custom Picture Control (COOLPIX Custom Picture Control)

White balance

Allows you to set the image quality (compression ratio) of images to be saved.

• Default setting: Normal

Allows you to set the image size of images to be saved.

• Default setting: i 4608×3456

Allows you to change the settings for image recording according to the shooting scene or your preferences.

• Default setting: Standard

Allows you to customize the settings of COOLPIX Picture Control and register them in Custom 1 or Custom 2 of Picture Control.

Allows you to adjust white balance to suit the weather conditions or light source in order to make the colors in images match what you see with your eyes.

• Default setting: Auto (normal)

E55

E56

Functions That Can Be Set with the d (Menu) Button

E57

E61

E62

Functions That Can Be Set with the d (Menu) Button

Option Description A

Metering

Continuous

ISO sensitivity

Exposure bracketing

AF area mode

Autofocus mode

Flash exp. comp.

Noise reduction filter

Active D-Lighting

Multiple exposure

Save user settings

Allows you to set the method that the camera uses to measure the brightness of the subject.

• Default setting: Matrix

Allows you to select single or continuous shooting.

• Default setting: Single

Allows you to control the camera’s sensitivity to light.

• Default setting: Auto

When Auto is selected, E is displayed in the monitor while shooting if ISO sensitivity increases.

• In m (manual) mode, when set to Auto or Fixed

range auto, the ISO sensitivity is fixed at ISO 100.

The exposure (brightness) can be changed automatically during continuous shooting.

• Default setting: Off

Allows you to change the method of how the camera selects the focus area for autofocus.

• Default setting: Target finding AF

Allows you to select either Single AF, which focuses only when the shutter-release button is pressed halfway, or Full-time AF, which continues focusing even when the shutter-release button is not pressed halfway.

• Default setting: Full-time AF

Allows you to adjust the flash output.

• Default setting: 0.0

Allows you to set the strength of the noise reduction function that is normally performed when saving images.

• Default setting: Normal

Allows you to prevent loss of contrast details in highlights and shadows to make the contrasts in images match what you see with your eyes.

• Default setting: Off

Allows you to combine two to three images and save them as a single image.

• Default setting:

- Multiple exposure mode: Off

-Auto gain: On

Allows you to save the current settings in mode dial

M (A34).

E65

E66

E70

E71

E72

E75

E76

E77

Option Description A

Reset user settings

Zoom memory

Startup zoom position

M exposure preview

Allows you to reset the settings saved to mode dial M.

When the zoom control is moved, the zoom position (equivalent to focal length/angle of view in 35mm [135] format) is switched to the positions that have been selected by setting the check box to on in this menu option.

• Default setting: Off

Allows you to set the zoom position (equivalent to focal length/angle of view in 35mm [135] format) for when the camera is turned on.

• Default setting: 24 mm

Allows you to set whether or not to reflect the brightness to the shooting screen when the exposure is changed in m (manual) mode.

• Default setting: Off

E79

E80

Functions That Can Be Set with the d (Menu) Button

The Movie Menu

Frame rate

Zoom microphone

Wind noise reduction

Electronic VR

Autofocus mode

Movie options

Enter shooting mode M d button M e menu icon M k button

Option Description A

Select the movie type.

Movie options

Autofocus mode

Functions That Can Be Set with the d (Menu) Button

Electronic VR

Wind noise reduction

Zoom microphone

Frame rate Select the frame rate used when recording movies. E86

Select normal speed to record movies at normal speed, or HS (high speed) to record movies that play in slow or fast motion.

Default setting: e

•

1080/30p

or p

1080/25p

Select either Single AF, which locks focus when movie recording begins, or Full-time AF, which continues focusing during movie recording.

• Default setting: Single AF

Set whether or not to perform electronic VR when recording movies.

• Default setting: On

Set whether or not to reduce wind noise during movie recording.

• Default setting: Off

In accordance with the angle of view, the camera records sounds over a wide area at the wide-angle zoom position, and records sounds in the limited area at the telephoto zoom position.

• Default setting: On

E81

E84

E85

E86

The Playback Menu

Press the c button (playback mode) M d button

Mark for Wi-Fi upload

Quick retouch

D-Lighting

Skin softening

Filter eects

Slide show

Option Description A

Mark for Wi-Fi

upload

Quick retouch

D-Lighting

Skin softening

Filter effects

Slide show

Protect

Rotate image

Small picture

Allows you to select images in the camera that you want to transfer to a smart device in advance before transferring them.

Allows you to create retouched copies in which

contrast and saturation have been enhanced.

Allows you to create copies with enhanced

brightness and contrast, brightening dark portions of an image.

Detects faces in images and allows you to create a

copy with softer facial skin tones.

Allows you to apply a variety of effects using digital

filters.

Allows you to view images in an automated slide show.

Allows you to protect selected images and movies from accidental deletion.

Allows you to rotate the displayed image to portrait

or landscape orientation.

Allows you to create a reduced-size copy of images. E30

E87

E27

Functions That Can Be Set with the d (Menu) Button

E28

E29

E88

E89

Option Description A

Allows you to select whether to display only the key picture for a sequence of images captured

Sequence display options

Choose key

picture

Select an image on the image selection screen. See “The Image Selection Screen” (A56) for more information.

Edited images are saved as separate files. Some images may not be edited.

continuously or to display the sequence as individual images.

• When only the key picture is displayed for a

sequence, press the k button to display each image in the sequence. Press the multi selector H to return to the key picture display.

Allows you to change the key picture for images captured in sequence.

The Image Selection Screen

When an image selection screen such as the one shown on the right is displayed while operating the camera, follow the procedures described below to select the images.

Erase selected images

Back

E90

Functions That Can Be Set with the d (Menu) Button

1 Use the multi selector JK or

rotate it to select the desired image.

• Move the zoom control (A1) toward g (i) to switch to full-frame playback, or f (h) to switch to thumbnail playback.

• Only one image can be selected for Rotate image and Choose key picture.

Proceed to step 3.

2 Use HI to select ON or OFF.

• When ON is selected, an icon is displayed

under the selected image. Repeat steps 1 and 2 to select additional images.

3 Press the k button to apply the image selection.

• When a confirmation dialog is displayed, follow the on-screen instructions to

operate.

Erase selected images

Back

Erase selected images

Back

The Setup Menu

Vibration reduction

Date stamp

EVF auto toggle

Monitor settings

Slot empty release lock

Time zone and date

Press the d button M z menu icon M k button

Option Description A

Time zone and date Allows you to set the camera clock. E97

Slot empty release lock

Monitor settings

EVF auto toggle

Date stamp

Vibration reduction

AF assist

Digital zoom

Assign side zoom control

Sound settings Allows you to adjust sound settings.

Auto off

Allows you to set the operation of the shutter button when the memory card is not inserted in the camera.

Allows you to adjust post-shooting image review, monitor brightness, and photo information display settings.

Allows you to set whether or not to automatically switch the display to the viewfinder when you bring your face close to the viewfinder.

Allows you to imprint the shooting date and time on images.

Allows you to select the vibration reduction setting used when shooting.

Allows you to enable or disable the AF-assist illuminator.

Allows you to set whether or not to use digital zoom.

Allows you to select the function to be performed during shooting when the side zoom control is moved.

Allows you to set the amount of time that passes before the monitor turns off to save power.

E99

E100

E101

E102

E103

E104

E105

E106

Functions That Can Be Set with the d (Menu) Button

Option Description A

Format card Allows you to format the memory card.

Language

Charge by computer

Toggle Av/Tv selection

Reset file numbering

Peaking

Reset all

Firmware version View the current camera firmware version.

Functions That Can Be Set with the d (Menu) Button

Allows you to change the camera’s display language.

Allows you to set whether or not the battery in the camera is charged when the camera is connected to a computer.

Allows you to switch the method for setting the flexible program, shutter speed or aperture value.

Allows you to reset the sequential numbering of file numbers when Yes is selected.

Allows you to set whether or not to highlight areas that are in focus in white on the image displayed in the monitor when operating manual focus.

Allows you to reset the camera’s settings to their default values.

E106

E107

E108

E109

Using Location Data Functions

F5.6

840

F5.6

1/250

F5.6

840

F5.6

1/250

When Record location data in Location data options of the z (location data options) menu (E93) is set to On, the camera starts receiving signals from the positioning satellites.

Location data reception can be checked on the shooting screen.

• n or o: Signals are being received

from four or more satellites, or from three satellites, and positioning is being performed.

• z: Signals are being received, but

positioning is not possible.

• y: Signals are not received.

Recording the Shooting Location Data on the Image

• When shooting while positioning is being performed, the obtained location

data (latitude and longitude) are recorded on the images to be shot.

• The recorded location data can be checked on a map with ViewNX 2 after

transferring the image to a computer (E53).

Recording the Log

• When selecting Start log in Create log in the location data options menu,

while positioning is being performed, the location data of places you visit with the camera is recorded at the certain interval.

• After the recorded log is saved to a memory card by using Save log in the location data options menu, view the log with software that can display log data.

• Log data is NMEA format-compliant. However, display in all NMEA formatcompliant software or on all NMEA format-compliant cameras is not guaranteed.

Displaying POI Information

• When Embed POI in Points of interest (POI) of the location data options

menu is set to On, the nearest location name information for the current position is also recorded on the images to be shot.

• When Display POI of the location data options menu is set to On, the nearest location name information for the current position is displayed on the shooting screen, and the location name information recorded on the image is displayed on the playback screen.

1/250

F5.6

840

Using Location Data Functions

840

Using the Wi-Fi (Wireless LAN) Function

You can perform the following functions if you install the dedicated software “Wireless Mobile Utility” on your smart device that runs on Android OS or iOS, and connect it to the camera.

Take Photos

You can save images to a smart device by pressing the shutter-release button of the camera or remotely releasing the camera shutter from the smart device.

• Operations cannot be performed on the camera during remote control operation. The shooting mode is set to A (auto) mode and the focus area is set to the center of the frame, regardless of the camera’s settings.

Using the Wi-Fi (Wireless LAN) Function

View Photos

Images that are saved in the camera’s memory card can be transferred and viewed on your smart device. You can also preselect the images in the camera that you want to transfer to your smart device.

B Notes About Security Settings

No security settings such as password are configured for the camera at the time of purchase. We strongly recommend performing the required security settings before using the Wi-Fi function. Use Options in the Wi-Fi options menu (A49) to perform the security settings.

Installing the Software on the Smart Device

1 Use your smart device to connect to the Google Play Store,

App Store or other online apps marketplace and search for “Wireless Mobile Utility.”

• Check the user’s manual provided with your smart device for further details.

2 Check the description and other information and install the

software.

C User’s Manual for Wireless Mobile Utility

Download the user’s manual from the website below.

• Android OS: http://nikonimglib.com/ManDL/WMAU/

• iOS: http://nikonimglib.com/ManDL/WMAU-ios/

To establish a connection with the camera, press the q (Wi-Fi) button on the camera, and turn on the Wi-Fi function of the smart device, and then start the “Wireless Mobile Utility” while Negotiating... Please wait. is displayed on the camera.

Connecting the Camera to a TV,

Open the connector cover.

HDMI micro connector (Type D)

Insert the plug straight.

Micro-USB connector

Printer, or Computer

You can enhance your enjoyment of images and movies by connecting the camera to a TV, printer, or computer.

• Before connecting the camera to an external device, make sure the remaining battery level is sufficient and turn the camera off. Before disconnecting, make sure to turn the camera off.

• If the AC Adapter EH-67A (available separately) is used, this camera can be powered from an electrical outlet. Do not use any other make or model of AC adapter as it may cause the camera to heat up or malfunction.

• For information about the connection methods and subsequent operations, refer to the documentation included with the device in addition to this document.

Connecting the Camera to a TV, Printer, or Computer

Viewing images on a TV

Images and movies captured with the camera can be viewed on a TV. Connection method: Connect a commercially available HDMI cable to the TV’s HDMI input jack.

Printing images without using a computer

If you connect the camera to a PictBridge-compatible printer, you can print images without using a computer. Connection method: Connect the camera directly to the printer’s USB port with the included USB cable.

Viewing and organizing images on a computer

Connecting the Camera to a TV, Printer, or Computer

You can transfer images to a computer to perform simple retouching and manage image data. Connection method: Connect the camera to the computer’s USB port with the USB cable.

• Before connecting to a computer, install ViewNX 2 on the computer.

• If any USB devices that draw the power from the computer are connected, disconnect them from the computer before you connect the camera to it. Connecting the camera and other USB-powered devices to the same computer simultaneously may cause a camera malfunction or excessive power supply from the computer, which could damage the camera or memory card.

Reference Section

The Reference Section provides detailed information and hints about using the camera.

Shooting

Hints and Notes About the Scene Mode.................................... E3

Default Settings (Flash, Focus mode, Etc.)...............................E15

Focusing ..............................................................................................E18

The Control Range of the Shutter Speed

(j, k, l, m Modes) ........................................................................E22

Playback

Playback Zoom ..................................................................................E23

Thumbnail Playback/Calendar Display.....................................E24

Viewing and Deleting Images Captured Continuously

(Sequence) ..........................................................................................E25

Editing Images (Still Images) ........................................................E26

Movie

Recording and Playing Back Movies..........................................E32

Capturing Still Images While Recording Movies ...................E35

Operations During Movie Playback ........................................... E36

Editing Movies ...................................................................................E37

Location Data Functions

Recording the Location Data on the Image............................E39

Recording the Log of Movement Information.......................E42

Connection

Connecting to a Smart Device (Wi-Fi) .......................................E45

Preselecting Images in the Camera That You Want to

Transfer to a Smart Device ............................................................ E47

Connecting the Camera to a TV (Playback on a TV)

Connecting the Camera to a Printer (Direct Print) ...............E49

Using ViewNX 2 (Transferring Images to a Computer) .......E53

.......................E48

The Shooting Menu (The Common Shooting Options) .....E55

The Shooting Menu (j, k, l or m Mode) .............................E57

The Movie Menu ...............................................................................E81

The Playback Menu..........................................................................E87

The Wi-Fi Options Menu ................................................................ E91

The Location Data Options Menu .............................................. E93

The Setup Menu................................................................................E97

Additional Information

Error Messages ............................................................................... E110

File Names........................................................................................ E114

Optional Accessories .................................................................... E115

Principle Functions of the Controls ........................................ E116

Hints and Notes About the Scene Mode

X Night landscape

• Press the d button to select u Hand-held or w Tri po d in Night

landscape.

• u Hand-held (default setting):

- Pr ess the shutter-release button all the way to capture a series of images which are combined into a single image and saved.

- Once the shutter-release button is pressed all the way, hold the camera still until a still image is displayed. After taking a picture, do not turn the camera off before the monitor switches to the shooting screen.

- The angle of view (i.e., the area visible in the frame) seen in the saved image is narrower than that seen in the monitor at the time of shooting.

• w Tripod:

- One image is captured at a slow shutter speed when the shutter-release button is pressed all the way.

- Vib ration reduction is disabled regardless of the Vibration reduction setting in the setup menu (A57).

s Night portrait

• Press the d button to select u Hand-held or w Tripod in Night portrait.

• One image is captured at a slow shutter speed. Compared to using w Tripod, when u Hand-held is selected, the camera sets a slightly faster

shutter speed in accordance with the shooting conditions to prevent camera shake.

• When w Tripod is selected, vibration reduction is disabled regardless of the Vibration reduction setting in the setup menu (A57).

• The flash always fires. Raise the flash before shooting.

Reference Section

c Landscape

e Portrait (for taking close-up portraits of one or two people)

Portrait (for taking portraits of large numbers of people, or images in which the background takes up a large portion of the frame)

f Landscape h Night portrait (for taking close-up portraits of one or two people)

Night portrait (for taking portraits of large numbers of people, or images in which the background takes up a large portion of the frame)

Night landscape

• The camera shoots images continuously and combines and saves

them as a single image in the same way as when Hand-held in X (night landscape) (E3) is selected.

i Close-up j Backlighting (for taking pictures of subjects other than people)

d Backlighting (for taking portrait pictures)

d Other shooting scenes

• Press the d button to select Noise reduction burst or Single shot in

Landscape.

• Noise reduction burst: This enables you to shoot a sharp landscape with a

minimum of noise.

- Press the shutter-release button all the way to capture a series of images which are combined into a single image and saved.

- The angle of view (i.e., the area visible in the frame) seen in the saved image is narrower than that seen in the monitor at the time of shooting.

•Single shot (default setting): Saves images with emphasized outlines and contrast.

- One image is captured when the shutter-release button is pressed all the way .

y M x Scene auto selector

• When you point the camera at the subject, the camera automatically recognizes the optimum scene mode from the list below and adjusts the shooting settings accordingly.

Reference Section

• Depending on shooting conditions, the camera may not select the desired scene mode. In this case, select another shooting mode (A24).

y M d Sports

• While the shutter-release button is held all the way down, the camera shoots up to about 7 images continuously at a rate of about 7 fps (when image quality is set to Normal and image size is set to i 4608×3456).

• The frame rate for continuous shooting may become slow depending on the current image quality setting, image size setting, the memory card used, or shooting condition.

• Focus, exposure, and hue are fixed at the values determined with the first image in each series.

y M f Party/indoor

• To avoid the effects of camera shake, hold the camera steady. Set Vibration reduction to Off in the setup menu (A57) when using a tripod to stabilize the

camera during shooting.

y M k Close-up

On the screen displayed when k Close-up is selected, select Noise reduction burst or Single shot.

•Noise reduction burst: This enables you to shoot a sharp image with a

minimum of noise.

- Press the shutter-release button all the way to capture a series of images

which are combined into a single image and saved.

- Once the shutter-release button is pressed all the way, hold the camera still

until a still image is displayed. After taking a picture, do not turn the camera off before the monitor switches to the shooting screen.

- If the subject moves or there is a significant camera shake during continuous

shooting, the image may be distorted, overlapped, or blurred.

- The angle of view (i.e., the area visible in the frame) seen in the saved image is

narrower than that seen in the monitor at the time of shooting.

•Single shot (default setting): Saves images with emphasized outlines and contrast.

- One image is captured when the shutter-release button is pressed all the way .

• The focus mode (A40) setting is changed to D (macro close-up) and the camera automatically zooms to the closest position at which it can focus.

• You can move the focus area. Press the k button, use the multi selector

HIJK or rotate it to move the focus area, and press the k button to apply

the setting.

Reference Section

y M u Food

1/2 50

F5. 6

840

10m 0s

• The focus mode (A40) setting is changed to D

(macro close-up) and the camera automatically zooms to the closest position at which it can focus.

• You can adjust hue by using the command dial.

The hue setting is saved in the camera’s memory even after the camera is turned off.

• You can move the focus area. Press the k

button, use the multi selector HIJK or rotate it to move the focus area, and press the k button to apply the setting.

y M l Museum

• The camera captures a series of up to 10 images while the shutter-release button is held all the way down, and the sharpest image in the series is automatically selected and saved (BSS (Best Shot Selector)).

• The flash does not fire.

y M m Fireworks show

• The shutter speed is fixed at about 4 seconds.

y M n Black and white copy

• Use together with D (macro close-up) focus mode (A40) when shooting subjects that are close to the camera.

Reference Section

1/250

F5.6

10m 0s

840

y M o Backlighting

• On the screen displayed when o Backlighting is selected, select On or Off to enable or disable the high dynamic range (HDR) function based on the type of image you want to capture.

•Off (default setting): The flash fires to prevent the subject from being hidden in shadow. Shoot images with the flash raised.

: Use when taking pictures with very bright and dark areas in the same frame.

•

B Notes About HDR

• Use of a tripod is recommended. Set Vibration reduction in the setup menu

(A57) to Off when using a tripod to stabilize the camera.

• When the shutter-release button is pressed all the way, the camera shoots images continuously and saves the following two images.

- A non-HDR composite image

- An HDR composite image in which the loss of details in highlights or shadows is

minimized

• If there is only enough memory to save one image, an image processed by DLighting (A55) at the time of shooting, in which dark areas of the image are corrected, is the only image saved.

• Once the shutter-release button is pressed all the way, hold the camera still until a still image is displayed. After taking a picture, do not turn the camera off before the monitor switches to the shooting screen.

• The angle of view (i.e., the area visible in the frame) seen in the saved image is narrower than that seen in the monitor at the time of shooting.

• Depending on the shooting conditions, dark shadows may appear around bright subjects and bright areas may appear around dark subjects.

Reference Section

y M O Pet portrait

• When you point the camera at a dog or cat, the camera detects the pet’s face and focuses on it. By default, the shutter is automatically released when a dog or cat face is detected (pet portrait auto release).

• On the screen displayed when O Pet portrait is selected, select U Single or V Continuous.

- U Single: Whenever a dog or cat face is detected, the camera captures 1

image.

- V Continuous: Whenever a dog or cat face is detected, the camera captures

3 images continuously.

B Pet Portrait Auto Release

• Press the multi selector J (n) to change the Pet portrait auto release setting.

- Y: The camera automatically releases the shutter when it detects a dog or cat

face.

- Off: The camera does not release the shutter automatically, even if a dog or cat face is detected. Press the shutter-release button. The camera also detects human faces when Off is selected.

• Pet portrait auto release is set to Off after 5 bursts have been taken.

• Shooting is also possible by pressing the shutter-release button, regardless of the Pet portrait auto release setting.

B Focus Area

• When the camera detects a face, the face is displayed inside a yellow border. When the camera acquires focus on a face displayed inside

Reference Section

a double border (focus area), the double border changes to green. If no faces are detected, the camera focuses on the area in the center of the frame.

• Under some shooting conditions, the pet face may not be detected and other subjects may be displayed inside a border.

1/250 F5.6

25m 0s25m 0s

840

y M g Moon

• You can adjust hue by using the command dial. The hue setting is saved in the camera’s memory even after the camera is turned off.

• Adjust the brightness with exposure compensation (A44) according to shooting conditions such as the waxing and waning of the moon and shooting requirements.

• At the wide-angle zoom position, the framin g border is displayed to indicate the angle of view equivalent to that of 1440 mm lens (in 35mm [135] format). The angle of view becomes equivalent to that of 1440 mm lens by pressing the k button.

y M L Bird-watching

• On the screen displayed when L Bird-watching is selected, select U Single

or V Continuous.

• U Single: One image is shot each time the shutter-release button is pressed.

• V Continuous: While the shutter-release button is held all the way down,

images are captured continuously.

- The frame rate for continuous shooting is about 7 fps and the maximum number of continuous shots is about 7 (when image quality is set to Normal and image size is set to i 4608×3456).

• At the wide-angle zoom position, the framin g border is displayed to indicate the angle of view equivalent to that of 800 mm lens (in 35mm [135] format). The angle of view becomes equivalent to that of 800 mm lens by pressing the k button.

Reference Section

Shooting with Easy Panorama

1/2 501/250 F5. 6

F5.6

840

25m 0s25 m 0s25m 0s

Rotate the mode dial to y M d button M p Easy panorama M k button

1 Select W Normal (180°) or X

Wide (360°) as the shooting

range and press the k button.

• When the camera is readied in the horizontal position, the image size (width × height) is as follows.

- W Normal (180°):

4800 × 920 when moved horizontally, 1536 × 4800 when moved vertically

- X Wide (360°):

9600 × 920 when moved horizontally, 1536 × 9600 when moved vertically

2 Frame the first edge of the

panorama scene, and then press the shutter-release button halfway to focus.

• The zoom position is fixed at wide-angle.

• The camera focuses in the center of the

Reference Section

frame.

3 Press the shutter-release button

all the way, and then remove your finger from the shutter-release button.

• KLJI are displayed to indicate the direction of camera movement.

Easy panorama

Normal (180°)

Wide (360°)

E10

4 Move the camera in one of the

Guide

four directions until the guide indicator reaches the end.

• When the camera detects which direction it is moving in, shooting begins.

• Shooting ends when the camera captures the specified shooting range.

• Focus and exposure are locked until shooting ends.

Example of Camera Movement

• Using your body as the axis of rotation,

move the camera slowly in an arc, in the direction of the marking (KLJI).

• Shooting stops if the guide does not reach the edge within about 15 seconds (when selected) or within about 30 seconds (when after shooting starts.

B Notes About Easy Panorama Shooting

• The range of the image seen in the saved image is narrower than that seen in the monitor at the time of shooting.

• If the camera is moved too quickly or shaken too much, or if the subject is too uniform (e.g. walls or darkness), an error may occur.

• If shooting is stopped before the camera reaches the half-way point in the panorama range, a panorama image is not saved.

• If more than half of the panorama range is captured but shooting ends before reaching the edge of the range, the range not captured is recorded and displayed in gray.

W Normal (180°) is

X Wide (360°) is selected)

Reference Section

E11

Playback with Easy Panorama

4/4/1321324/132

000 4. JP G

0004. JPG

201 4/05/ 15 15:3 0

15/11/2015 15:30

Switch to playback mode (A22), display an image captured using easy panorama in fullframe playback mode, and then press the k button to scroll the image in the direction that was used when shooting.

• Rotate the multi selector to scroll forward or

backward quickly.

Playback controls are displayed in the monitor during playback. Use the multi selector JK to select a control, and then press the k button to perform the operations described below.

Function Icon Description

Rewind A Hold down the k button to scroll backward quickly.* Advance B Hold down the k button to scroll forward quickly.*

Pause playback. The operations listed below can be performed while paused.

Pause E

Reference Section

End G Switch to full-frame playback mode.

* These operations can also be performed by rotating the multi selector.

C Hold down the k button to rewind.* D Hold down the k button to scroll.*

F Resume automatic scrolling.

B Notes About Easy Panorama Images

• The images cannot be edited on this camera.

• This camera may not be able to scroll the playback of, or zoom in on, easy

panorama images captured with another make or model of digital camera.

B Notes About Printing Panorama Images

The entire image may not be able to be printed depending on the printer’s settings. Additionally, printing may not be possible depending on the printer.

E12

Shooting Time-lapse Movies

The camera can automatically capture still images at a specified interval to create time-lapse movies that are approximately 10 seconds long.

• When the Frame rate setting of the movie menu is set to 30 fps (30p/

60p), 300 images are captured and saved with e 1080/30p. When set to 25 fps (25p/50p), 250 images are captured and saved with p 1080/ 25p.

Rotate the mode dial to y M d button M i Time-lapse movie M k button

Type (scene/required shooting time)

30 fps (30p/60p)

Interval time

U Cityscape (10 minutes)1 (default setting)

V Landscape (25 minutes) Y Sunset (50 minutes) X Night sky (150 minutes) W Star trails (150 minutes)

The camera focuses on the area in the center of the frame.

Suited for recording the movement of stars.

Star movement appears as lines of light due to image processing.

10 s 12 s

30 s 36 s

1 Use the multi selector HI to

select a type, and press the k button.

2 Select whether or not to fix

exposure (brightness), and press the k button. (except Night sky and Star trails)

• When AE-L on is selected, the exposure used for the first image is used for all images. When the brightness changes drastically like at dusk, AE-L off is recommended.

25 fps (25p/50p)

2 s 2.4 s

5 s 6 s

Time-lapse movie

Cityscape (10 minutes)

Landscape (25 minutes)

Sunset (50 minutes)

Night sky (150 minutes)

Star trails (150 minutes)

Landscape (25 minutes)

AE-L on

AE-L o

Reference Section

E13

3 Stabilize the camera by using a tool such as a tripod.

1/2 50

F5. 6

25m 0s

840

4 Press the shutter-release button to

25m 0s

capture the first image.

• Set exposure compensation (A44) before releasing the shutter for the first image. Exposure compensation cannot be changed after the first image is captured. Focus and hue are fixed when the first image is captured.

• The shutter is automatically released for the second and subsequent images.

• The monitor may turn off while the camera is not capturing images.

• Shooting ends automatically when 300 or 250 images are captured.

• Press the k button to end shooting before the required shooting time

elapses and create a time-lapse movie.

• Sound and still images cannot be saved.

B Notes About Time-lapse Movie

• Do not exchange the memory card until shooting is complete.

• Use a fully charged battery to prevent the camera from turning off unexpectedly.

• Time-lapse movies cannot be recorded by pressing the b (e) button.

• Do not rotate the mode dial to a different setting until shooting is complete.

• Vibration reduction is disabled regardless of the Vibration reduction setting in

the setup menu (A57).

Reference Section

25m 0s

1/250

1/250 F5.6

F5.6

25m 0s

840

E14

Default Settings (Flash, Focus mode, Etc.)

The default settings for each shooting mode are listed below.

Flash

mode

(A36)

A (auto) U OFF u (special effects) U

j, k, l, m X OFF M (user settings) X OFF

Self-timer

(A38)

OFF A 0.0

Scene

X (night landscape) W

s (night portrait) V c (landscape) W x (scene auto

selector)

b (portrait) V OFF d (sports) W

f (party/indoor) V

OFF B

OFF OFF B

OFF A

OFF OFF A

Z (beach) U OFF A z (snow) U OFF A

h (sunset) W i (dusk/dawn) W k (close-up) U u (food) W l (museum) W m (fireworks show) W n (black and white

copy) o (backlighting) X/W

OFF B OFF B OFF D OFF D OFF A

OFF

U OFF A

OFF A

Focus mode

compensation

(A40)

0.0

A 0.0 A 0.0

0.0

A A

0.0

Q110.0

0.0

Exposure

(A44)

Reference Section

E15

Flash

mode

(A36)

p (easy panorama) W O (pet portrait) W

g (moon) W L (bird-watching) W

i (time-lapse movie) W

Smile timer can also be selected.

E (manual focus) cannot be selected.

The flash is fixed at W (off) when High ISO monochrome is selected.

Cannot be changed.

Cannot be changed. The flash mode setting is fixed at fill flash with slow sync and red-eye reduction.

Canno t be chang ed. The camera automatically selects the flash mode appropriate for the scene it has selected.

A (autofocus) or E (manual focus) can be selected.

May switch to slow sync with red-eye reduction flash mode.

A (autofocus) or D (macro close-up) can be selected.

The flash is fixed at W (off) when using Noise reduction burst.

Q (infinity) or E (manual focus) can be selected.

When HDR is set to Off, the flash mode is fixed at X (fill flash). When HDR is set to On, the flash mode is fixed at W (off).

Pet portrait auto release (E8) can be set to on or off. Self-timer cannot be used.

Can be selected from A (autofocus), B (infinity) or E (manual focus).

Reference Section

The focus is fixed at A (autofocus) when using Cityscape (10 minutes), or B (infinity) when using Landscape (25 minutes) or Sunset (50 minutes). Q (infinity) or E (manual focus) can be selected when using Night sky (150

Self-timer

(A38)

OFF

n2s B OFF A

OFF

Focus mode

(A40)

A/B/

minutes) or Star trails (150 minutes).

Exposure

compensation

(A44)

0.0

E16

Nikon COOLPIX P610 Reference Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

Introduction

Read This First

Other Information

Information and Precautions

For Your Safety

WARNINGS

Notices

<Important> Notes About Location Data Functions (GPS/GLONASS)

Wi-Fi (Wireless LAN Network)

Parts of the Camera

The Camera Body

The Monitor

For Shooting

For Playback

Preparing for Shooting

How to Attach the Camera Strap and Lens Cap

Insert the Battery and Memory Card

Removing the Battery or Memory Card

Charge the Battery

Opening and Adjusting the Angle of the Monitor

Turn the Camera On and Set the Display Language, Date, and Time

Basic Shooting and Playback Operations

Using the Flash

Switching Between the Monitor and Viewfinder

Using the Zoom

The Shutter-release Button

Recording Movies

Play Back Images

Delete Images

Changing the Shooting Mode

Functions That Can Be Set Using the Multi Selector (for Shooting)

Shooting Features

Scene Mode (Shooting Suited to Scenes)

Flash Mode

Self-timer

Focus Mode

Using Manual Focus

Functions That Cannot Be Used Simultaneously When Shooting

The Shooting Menu

Common Options

The Movie Menu

The Playback Menu

The Image Selection Screen

The Setup Menu

Using Location Data Functions

Using the Wi-Fi (Wireless LAN) Function

Installing the Software on the Smart Device

Connecting the Camera to a TV, Printer, or Computer

Reference Section

Hints and Notes About the Scene Mode

Shooting with Easy Panorama

Playback with Easy Panorama

Shooting Time-lapse Movies

Default Settings (Flash, Focus mode, Etc.)