• Microsoft, Windows and Windows Vista are either registered trademarks or
trademarks of Microsoft Corporation in the United States and/or other countries.
• Macintosh, Mac OS, and QuickTime are trademarks of Apple Inc.
• Adobe and Acrobat are registered trademarks of Adobe Systems Inc.
• The SD logo is a trademark of the SD Card Association.
• PictBridge is a trademark.
• All other trade names mentioned in this manual or the other documentation
provided with your Nikon product are trademarks or registered trademarks of their
respective holders.
Page 3
Introduction
First Steps
Basic Photography and Playback: Auto Mode
A
Shooting Suited for the Scene
C
Automatic Shooting of a Smiling Face
a
More on Playback
c
Movies
D
Voice Recordings
E
Connecting to Televisions, Computers and Printers
d
Technical Notes
Shooting, Playback and Setup Menus
i
Page 4
For Your Safety
To prevent damage to your Nikon product or injury to yourself or to others, read
the following safety precautions in their entirety before using this equipment.
Keep these safety instructions where all those who use the product will read them.
The consequences that could result from failure to observe the precautions listed
in this section are indicated by the following symbol:
This icon marks warnings, information that should be read before using this Nikon
product, to prevent possible injury.
WARNINGS
Turn off in the event of
malfunction
Should you notice smoke or an
unusual smell coming from the
camera or AC adapter, unplug the AC
adapter and remove the battery
immediately, taking care to avoid
burns. Continued operation could
result in injury. After removing or
disconnecting the power source, take
the equipment to a Nikon-authorized
service representative for inspection.
Do not disassemble
Touching the internal parts of the
camera or AC adapter could result in
injury. Repairs should be performed
only by qualified technicians. Should
the camera or AC adapter break open
as the result of a fall or other accident,
take the product to a Nikon-authorized
service representative for inspection,
after unplugging the product and/or
removing the battery.
ii
Do not use the camera or AC
adapter in the presence of
flammable gas
Do not use electronic equipment in
the presence of flammable gas, as this
could result in explosion or fire.
Handle the camera strap with
care
Never place the strap around the neck
of an infant or child.
Keep out of reach of children
Particular care should be taken to
prevent infants from putting the
battery or other small parts into their
mouths.
Page 5
For Your Safety
Observe caution when
handling the battery
The battery may leak or explode if
improperly handled. Observe the
following precautions when handling
the battery for use in this product:
• Before replacing the battery, turn
the product off. If you are using the
AC adapter, be sure it is unplugged.
• Only use a Rechargeable Li-ion
Battery EN-EL10 (supplied). Charge
the battery by inserting it in a
Battery Charger MH-63 (supplied).
• When inserting the battery, do not
attempt to insert it upside down or
backwards.
• Do not short or disassemble the
battery or attempt to remove or
break the battery insulation or
casing.
• Do not expose the battery to flame
or to excessive heat.
• Do not immerse in or expose to
water.
• Return the battery to the battery
case for transportation. Do not
transport or store with metal objects
such as necklaces or hairpins.
• The battery is prone to leakage
when fully discharged. To avoid
damage to the product, be sure to
remove the battery when no charge
remains.
• Discontinue use immediately should
you notice any change in the
battery, such as discoloration or
deformation.
• If liquid from the damaged battery
comes in contact with clothing or
skin, rinse immediately with plenty
of water.
Observe the following
precautions when handling
the battery charger
• Keep dry. Failure to observe this
precaution could result in fire or
electric shock.
• Dust on or near the metal parts of
the plug should be removed with a
dry cloth. Continued use could
result in fire.
• Do not handle the power cable or
go near the battery charger during
lightning storms. Failure to observe
this precaution could result in
electric shock.
• Do not damage, modify, forcibly tug
or bend the power cable, place it
under heavy objects, or expose it to
heat or flames. Should the insulation
be damaged and the wires become
exposed, take it to a Nikonauthorized service representative for
inspection. Failure to observe these
precautions could result in fire or
electric shock.
• Do not handle the plug or battery
charger with wet hands. Failure to
observe this precaution could result
in electric shock.
• Do not use with travel converters or
adapters designed to convert from
one voltage to another or with DCto-AC inverters. Failure to observe
this precaution could damage the
product or cause overheating or fire.
iii
Page 6
For Your Safety
Use appropriate cables
When connecting cables to the input
and output jacks, use only the cables
provided or sold by Nikon for the
purpose, to maintain compliance with
product regulations.
Handle moving parts with
care
Be careful that your fingers or other
objects are not pinched by the lens
cover or other moving parts.
CD-ROMs
The CD-ROMs supplied with this
device should not be played back on
audio CD equipment. Playing CDROMs on an audio CD player could
cause hearing loss or damage the
equipment.
Observe caution when using
the flash
Using the flash close to your subject’s
eyes could cause temporary visual
impairment. Particular care should be
observed if photographing infants,
when the flash should be no less than
one meter (3 ft. 4 in.) from the subject.
Do not operate the flash with
the flash window touching a
person or object
Failure to observe this precaution
could result in burns or fire.
Avoid contact with liquid
crystal
Should the monitor break, care should
be taken to avoid injury caused by
broken glass and to prevent liquid
crystal from the monitor touching the
skin or entering the eyes or mouth.
iv
Page 7
Notices
Notice for Customers in the U.S.A.
Federal Communications
Commission (FCC) Radio
Frequency Interference Statement
This equipment has been tested and
found to comply with the limits for a
Class B digital device, pursuant to Part
15 of the FCC rules. These limits are
designed to provide reasonable
protection against harmful
interference in a residential installation.
This equipment generates, uses, and
can radiate radio frequency energy
and, if not installed and used in
accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no
guarantee that interference will not
occur in a particular installation. If this
equipment does cause harmful
interference to radio or television
reception, which can be determined
by turning the equipment off and on,
the user is encouraged to try to correct
the interference by one or more of the
following measures:
• Reorient or relocate the receiving
antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an
outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an
experienced radio/television
technician for help.
CAUTIONS
Modifications
The FCC requires the user to be
notified that any changes or
modifications made to this device that
are not expressly approved by Nikon
Corporation may void the user’s
authority to operate the equipment.
Interface Cables
Use the interface cables sold or
provided by Nikon for your equipment.
Using other interface cables may
exceed the limits of Class B Part 15 of
the FCC rules.
Notice for customers in the State of
California
WARNING
Handling the cord on this product will
expose you to lead, a chemical known
to the State of California to cause birth
defects or other reproductive harm.
Wash hands after handling.
Nikon Inc.,
1300 Walt Whitman Road
Melville, New York 11747-3064
USA
Tel: 631-547-4200
v
Page 8
Notices
Notice for customers in Canada
CAUTION
This Class B digital apparatus complies
with Canadian ICES-003.
ATTENTION
Cet appareil numérique de la classe B
est conforme à la norme NMB-003 du
Canada.
Notice for customers in Europe
This symbol indicates that
this product is to be
collected separately.
The following apply only to
users in European countries:
• This product is designated for
separate collection at an
appropriate collection point. Do not
dispose of as household waste.
• For more information, contact the
retailer or the local authorities in
charge of waste management.
This symbol on the battery
indicates that the battery is
to be collected separately.
The following apply only to
users in European countries:
• All batteries, whether marked with
this symbol or not, are designated
for separate collection at an
appropriate collection point. Do not
dispose of as household waste.
• For more information, contact the
retailer or the local authorities in
charge of waste management.
vi
Page 9
Table of Contents
For Your Safety........................................................................................................................................ ii
Notices ....................................................................................................................................................... v
About This Manual ................................................................................................................................1
Information and Precautions............................................................................................................. 2
Parts of the Camera...............................................................................................................................4
The Camera Body ...................................................................................................................................................4
The Monitor................................................................................................................................................................6
The A (Shooting Mode) Button...................................................................................................................8
The c (Playback) Button..................................................................................................................................8
The Multi Selector...................................................................................................................................................9
The d Button....................................................................................................................................................10
Switching Between Tabs.................................................................................................................................10
Help Displays..........................................................................................................................................................11
Attaching the Camera Strap.........................................................................................................................11
First Steps............................................................................................................................................. 12
Charging the Battery ..........................................................................................................................12
Inserting the Battery ...........................................................................................................................14
Removing the Battery.......................................................................................................................................15
Turning On and Off the Camera.................................................................................................................15
Setting Display Language, Date and Time .................................................................................16
A Basic Photography and Playback: Auto Mode .................................................................20
Step 1 Turn the Camera On and Select A (Auto) Mode.......................................................20
Indicators Displayed in A (Auto) Mode...............................................................................................21
Step 2 Frame a Picture .......................................................................................................................22
Using the Zoom....................................................................................................................................................23
Step 3 Focus and Shoot.....................................................................................................................24
Step 4 Playing Back and Deleting Pictures.................................................................................26
Playing Back Pictures (Playback Mode)..................................................................................................26
Using the Flash......................................................................................................................................28
Setting the Flash Mode....................................................................................................................................28
Taking Pictures with the Self-timer ...............................................................................................30
C Shooting Suited for the Scene................................................................................................ 33
Shooting in Scene Mode...................................................................................................................33
Setting the Scene Mode..................................................................................................................................33
Features .....................................................................................................................................................................34
Shooting in the Scene Mode Selected by the Camera (Scene Auto Selector).............40
Taking Pictures in Food Mode.....................................................................................................................41
Taking Pictures for a Panorama..................................................................................................................43
a Automatic Shooting of a Smiling Face................................................................................45
Shooting in Smile Mode....................................................................................................................45
Playing Voice Memos........................................................................................................................................56
Viewing Pictures by Date (List by Date Mode)..........................................................................57
Selecting a Date in List by Date Mode...................................................................................................57
Using List by Date Mode.................................................................................................................................58
List by Date Menu ...............................................................................................................................................59
Image Searching in Auto Sort Mode.............................................................................................60
Displaying Pictures in Auto Sort Mode..................................................................................................60
Using Auto Sort Mode......................................................................................................................................62
Auto Sort Menu ....................................................................................................................................................62
Sorting Pictures to a Favorites Folder.....................................................................................................65
Viewing the Pictures in Favorites Folder...............................................................................................66
Removing Pictures from Favorites............................................................................................................66
viii
Page 11
Table of Contents
Using Favorite Pictures Mode......................................................................................................................67
Favorite Pictures Menu ....................................................................................................................................68
D Movies .............................................................................................................................................70
Recording Movies ................................................................................................................................70
The Movie Menu...................................................................................................................................71
D Movie Options................................................................................................................................................71
w Electronic VR....................................................................................................................................................72
Movie Playback.....................................................................................................................................73
Deleting Movie Files...........................................................................................................................................73
E Voice Recordings........................................................................................................................... 74
Making Voice Recordings..................................................................................................................74
Playing Voice Recordings..................................................................................................................76
Creating a DPOF Print Order: Print Set.........................................................................................90
d Shooting, Playback and Setup Menus .............................................................................92
Shooting Options: The Shooting Menu.......................................................................................92
Displaying the Shooting Menu ..................................................................................................................92
A Image Mode...................................................................................................................................................93
B White Balance................................................................................................................................................95
C Continuous .....................................................................................................................................................97
E ISO Sensitivity ................................................................................................................................................99
F Color Options ...............................................................................................................................................99
G AF Area Mode.............................................................................................................................................100
Q Distortion Control ...................................................................................................................................103
Functions that Cannot Be Applied Simultaneously....................................................................104
ix
Page 12
Table of Contents
Playback Options: The Playback Menu .....................................................................................105
Displaying the Playback Menu.................................................................................................................105
b Slide Show....................................................................................................................................................107
c Delete..............................................................................................................................................................108
d Protect ...........................................................................................................................................................108
f Rotate Image...............................................................................................................................................109
h Copy ................................................................................................................................................................109
Basic Camera Setup: The Setup Menu.......................................................................................111
Displaying the Setup Menu........................................................................................................................112
w Electronic VR ...............................................................................................................................................113
a Menus..............................................................................................................................................................114
c Welcome Screen .....................................................................................................................................114
d Date ..................................................................................................................................................................115
e Monitor Settings.......................................................................................................................................118
f Date Imprint................................................................................................................................................119
U Motion Detection ....................................................................................................................................120
u Digital Zoom...............................................................................................................................................121
i Sound Settings .........................................................................................................................................121
k Auto Off..........................................................................................................................................................122
l Format Memory/m Format Card...................................................................................................123
n Language......................................................................................................................................................124
o Video Mode ................................................................................................................................................124
d Blink Warning ............................................................................................................................................124
p Reset All..........................................................................................................................................................126
r Firmware Version ....................................................................................................................................128
Thank you for your purchase of a Nikon COOLPIX S220/S225 digital camera. This
manual was written to help you enjoy taking pictures with your Nikon digital
camera. Read this manual thoroughly before use, and keep it where all those who
use the product will read it.
Symbols and Conventions
To make it easier to find the information you need, the following symbols and
conventions are used:
This icon marks cautions,
information that should be read
B
before use, to prevent damage to
the camera.
This icon marks notes, information
that should be read before using
C
the camera.
Notations
• A Secure Digital (SD) memory card is referred to as a “memory card.”
• The setting at the time of purchase is referred to as the “default setting.”
• The names of menu items displayed in the camera monitor, and the names of
buttons or messages displayed in the computer monitor appear in bold.
Screen Samples
In this manual, images are sometimes omitted from monitor display samples so
that monitor indicators can be more clearly shown.
Illustrations and Screen Display
Illustrations and text displays shown in this manual may differ from actual display.
This icon marks tips, additional
information that may be helpful
D
when using the camera.
This icon indicates that more
information is available elsewhere
A
in this manual or in the Quick Start
Guide.
Introduction
C Internal Memory and Memory Cards
Pictures taken with this camera can be stored in the camera’s internal memory or on removable
memory cards. If a memory card is inserted, all new pictures will be stored on the memory card and
delete, playback and format operations will apply only to the pictures on the memory card. The
memory card must be removed before the internal memory can be formatted or used to store
pictures to, or delete, or view pictures.
1
Page 14
Information and Precautions
Life-Long Learning
As part of Nikon’s “Life-Long Learning” commitment to ongoing product support and education,
continually updated information is available online at the following sites:
Introduction
• For users in the U.S.A.: http://www.nikonusa.com/
• For users in Europe and Africa: http://www.europe-nikon.com/support/
• For users in Asia, Oceania, and the Middle East: http://www.nikon-asia.com/
Visit these sites to keep up-to-date with the latest product information, tips, answers to frequently
asked questions (FAQs), and general advice on digital imaging and photography. Additional
information may be available from the Nikon representative in your area. See the URL below for
contact information:
http://imaging.nikon.com/
Use Only Nikon Brand Electronic Accessories
Nikon COOLPIX cameras are designed to the highest standards and include complex electronic
circuitry. Only Nikon brand electronic accessories (including battery chargers, batteries and AC
adapters) certified by Nikon specifically for use with this Nikon digital camera are engineered and
proven to operate within the operational and safety requirements of this electronic circuitry.
THE USE OF NON-NIKON ELECTRONIC ACCESSORIES COULD DAMAGE THE CAMERA AND MAY
VOID YOUR
The use of third-party rechargeable Li-ion batteries not bearing the
Nikon holographic seal could interfere with normal operation of the
camera or result in the batteries overheating, igniting, rupturing, or
leaking.
For more information about Nikon brand accessories, contact a local
authorized Nikon dealer.
Before Taking Important Pictures
Before taking pictures on important occasions (such as at weddings or before taking the camera on
a trip), take a test shot to ensure that the camera is functioning normally. Nikon will not be held liable
for damages or lost profits that may result from product malfunction.
About the Manuals
• No part of the manuals included with this product may be reproduced, transmitted, transcribed,
• Nikon reserves the right to change the specifications of the hardware and software described in
• Nikon will not be held liable for any damages resulting from the use of this product.
• While every effort was made to ensure that the information in these manuals is accurate and
NIKON WARRANTY.
Holographic seal:
Identifies this device as an
authentic Nikon product.
stored in a retrieval system, or translated into any language in any form, by any means, without
Nikon’s prior written permission.
these manuals at any time and without prior notice.
complete, we would appreciate it were you to bring any errors or omissions to the attention of the
Nikon representative in your area (address provided separately).
2
Page 15
Information and Precautions
Notice Concerning Prohibition of Copying or Reproduction
Note that simply being in possession of material that was digitally copied or reproduced by means
of a scanner, digital camera or other device may be punishable by law.
• Items prohibited by law from being copied or reproduced
Do not copy or reproduce paper money, coins, securities, government bonds or local government
bonds, even if such copies or reproductions are stamped “Sample.” The copying or reproduction
of paper money, coins, or securities which are circulated in a foreign country is prohibited. Unless
the prior permission of the government was obtained, the copying or reproduction of unused
postage stamps or post cards issued by the government is prohibited. The copying or
reproduction of stamps issued by the government and of certified documents stipulated by law is
prohibited.
• Cautions on certain copies and reproductions
The government has issued cautions on copies or reproductions of securities issued by private
companies (shares, bills, checks, gift certificates, etc.), commuter passes or coupon tickets, except
when a minimum of necessary copies are to be provided for business use by a company. Also, do
not copy or reproduce passports issued by the government, licenses issued by public agencies
and private groups, ID cards and tickets, such as passes and meal coupons.
• Comply with copyright notices
The copying or reproduction of copyrighted creative works such as books, music, paintings,
woodcut prints, maps, drawings, movies and photographs is governed by national and
international copyright laws. Do not use this product for the purpose of making i llegal cop ies or to
infringe copyright laws.
Disposing of Data Storage Devices
Please note that deleting images or formatting data storage devices such as memory cards or builtin camera memory does not completely erase the original image data. Deleted files can sometimes
be recovered from discarded storage devices using commercially available software, potentially
resulting in the malicious use of personal image data. Ensuring the privacy of such data is the user’s
responsibility.
Before discarding a data storage device or transferring ownership to another person, erase all data
using commercial deletion software, or format the device and then completely refill it with images
containing no private information (for example, pictures of empty sky). Be sure to also replace any
pictures selected for the welcome screen (A 114). Care should be taken to avoid injury or damage
to property when physically destroying data storage devices.
17 File number and type.............................130
7
Page 20
Basic Operations
The A (Shooting Mode) Button
Introduction
The Shooting-mode Selection Menu
In the shooting-mode selection menu, use the multi selector to change the
shooting mode.
1
2
3
4
Auto mode
To return to the shooting mode while the shooting-mode selection menu is
displayed, press the A button again.
The c (Playback) Button
The Playback-mode Selection Menu
In the playback-mode selection menu, use the multi selector to change the
playback mode.
1
2
3
4
Play
• Press the A button in playback mode to enter
shooting mode.
• Press the A button in shooting mode to display
the shooting-mode selection menu.
1. A (auto) mode (A 20)
2. x Scene mode* (A 33)
3. a Smile mode (A 45)
4. D Movie mode (A 70)
* The icon displayed differs depending upon the last
scene mode selected.
• Press the c button in shooting mode to enter
playback mode.
• Press the c button in playback mode to display
the playback-mode selection menu.
• If the camera is turned off, hold down the c
button to turn the camera on in playback mode.
1. c Playback mode (A 26)
2. h Favorite pictures mode (A 63)
3. F Auto sort mode (A 60)
4. C List by date mode (A 57)
To return to the playback mode while the playback-mode selection menu is
displayed, press the c button again.
8
Page 21
Basic Operations
15/05/2009 15:30
0004.JPG
44
The Multi Selector
This section describes standard uses of the multi selector to select modes, select
menu options and to apply selection.
For Shooting
Display m (flash mode) (A 28) menu or move cursor up
Display o
Display n (self-timer)
(A 30) menu
Display p (macro mode) (A 31) menu or move cursor down
For Playback
Select previous
picture
For the Menu Screen
Move cursor up
Move cursor left
or return to
previous screen
Move cursor down
(exposure compensation)
(A 32) guide
Apply selection
Select next picture
Move cursor right or go
to next screen (apply
selection)
Apply selection (go to
next screen)
Flash mode
15/05/2009 15:30
15/05/2009 15:30
0004.JPG
0004.JPG
Beach/snow
Shooting menu
Image mode
White balance
Continuous
ISO sensitivity
Color options
Exit
Introduction
44
C Note on the Multi Selector
In the manual, the button indicating up, down, left and right of the multi selector is shown as H, I,
J and K.
9
Page 22
Basic Operations
The d Button
Press the d button to display the menu for the selected mode.
• Use the multi selector to navigate the menus (A 9).
Introduction
• Choose the z tab on the left to display the setup menu.
• Press the d button again to exit the menu.
• Top tab: Display the available
• Bottom tab: Display the setup
Displayed when there
are more previous
menu items
menus in the current
mode
menu
Displayed when there are one
or more menu items to follow
Shooting menu
AF
area mode
Distortion control
Exit
Press the k button or the
multi selector K to
proceed to the next set of
options
Displayed when the menu
contains two or more pages
Shooting menu
Image mode
White balance
Continuous
ISO sensitivity
Color options
Exit
The selected option
AF area mode
Face priority
Auto
Manual
Center
Exit
Press the k button or the
multi selector K to apply
selection
Switching Between Tabs
Shooting menu
Image mode
White balance
Continuous
ISO sensitivity
Color options
Exit
Press the multi selector
J to highlight the tab
10
Shooting menu
Image mode
White balance
Continuous
ISO sensitivity
Color options
Exit
Press the multi selector
H or I to select the
tab, and press either the
k button or K
Set up
Electronic VR
Menus
Welcome screen
Date
Monitor settings
Exit
The selected menu is
displayed
Page 23
Basic Operations
Help Displays
Rotate the zoom control to g (j) when M/L is displayed at the lower right of
the menu screen to view a description of the currently selected menu option.
To return to the original menu, rotate the zoom control to g (j) again.
White balance
For accurate color reproduction,
choose a setting that matches
the light source.
Introduction
Exit
Back
Shutter-release Button
The camera features a two-stage shutter-release button. To set focus and
exposure, press the shutter-release button halfway, stopping when you feel
resistance. Focus and exposure lock while the shutter-release button is held in this
position. To release the shutter and take a picture, press the shutter-release button
the rest of the way down. Do not use force when pressing the shutter-release
button, as this may result in camera shake and blurred pictures.
Press the
shutter-release
button halfway
to set focus and
exposure
Press the
shutter-release
button the rest
of the way down
to take picture
Attaching the Camera Strap
11
Page 24
First Steps
Charging the Battery
The camera uses a Rechargeable Li-ion Battery EN-EL10 (supplied).
Charge the battery with the Battery Charger MH-63 (supplied) before first use or
when the battery is running low.
1 Connect the power cable.
First Steps
Connect the power cable to the battery charger 1 and insert the wall plug into a power
outlet 2. The CHARGE lamp will light to show that the charger is on 3.
2
3
1
2 Charge the battery.
Insert the battery at an angle as
shown 1, and set it in the battery
charger 2.
CHARGE lamp starts blinking when
battery is inserted 3. Charging is
complete when lamp stops blinking 4.
About 100 minutes are required to
charge a fully depleted battery.
12
3
1
4
2
Page 25
Charging the Battery
The following chart explains CHARGE lamp status.
CHARGE lampDescription
BlinksBattery charging.
OnBattery fully charged.
• The battery is not inserted correctly. Remove the battery and
reinsert it into the battery charger so that the battery is lying
flat.
Flickers
• Charge the battery indoors with an ambient temperature of
5 °C to 35 °C (41 °F to 95 °F) before use.
• The battery is faulty. Stop charging immediately, unplug the
charger, and take both the battery and charger to your retailer
or Nikon service representative.
3 Remove the battery and unplug the charger when charging is
complete.
B Notes on the Battery Charger
• The supplied battery charger is for use only with the Rechargeable Li-ion Battery EN-EL10. Be sure
to use only genuine Nikon brand rechargeable batteries.
• Be sure to read and follow the warnings for the battery charger on pages iii before using the
battery charger.
First Steps
B Notes on the Battery
• Be sure to read and follow the warnings for the battery on page iii and the section, “The Battery”
(A 132), before using the battery.
• If the battery is not used for an extended period, recharge it at least once every six months and run
it flat before returning it to storage.
C AC Power Supply
To power the camera continuously for extended periods, use an AC Adapter EH-62D (available
separately from Nikon) (A 129). Do not, under any circumstances, use another make or model of
AC adapter. Failure to observe this precaution could result in overheating or in damage to the
camera.
13
Page 26
Inserting the Battery
Insert a Rechargeable Li-ion Battery EN-EL10 (supplied) into your camera.
• Charge the battery before the first use or when the battery is running low
(A 12).
1 Open the battery-chamber/memory card slot
First Steps
cover.
2 Insert the battery.
Confirm that the positive (+) and negative (–) terminals
are oriented correctly as described on the label at the
entrance of the battery chamber, and insert the battery.
Use the battery to push the orange battery latch in the
direction indicated by the arrow 1 and fully insert the
battery 2. When the battery is fully inserted, the battery
latch will lock it in place.
B Inserting the Battery
Inserting the battery upside down or backwards could
damage the camera. Be sure to check the battery is in the
correct orientation.
3 Close the battery-chamber/memory card slot
cover.
14
Page 27
Inserting the Battery
Removing the Battery
Turn the camera off and make sure that the power-on
lamp and the monitor have gone out before opening
the battery-chamber/memory card slot cover.
To eject the battery, open the battery-chamber/
memory card slot cover and slide the orange battery
latch in the direction indicated by the arrow
battery can then be removed by hand
1. The
2.
• Note that the battery may become hot during use;
observe due caution when removing the battery.
Turning On and Off the Camera
To turn on the camera, press the power switch. The
power-on lamp (green) will light for a moment and the
monitor will turn on.
To turn off the camera, press the power switch again.
When the camera is turned off, both the power-on
lamp and monitor will turn off.
• If the camera is turned off, hold down the c button to turn the camera on in
playback mode.
First Steps
C Auto Power Off in Shooting Mode (Standby Mode)
If no operations are performed for about a minute (default setting), the monitor will turn off
automatically and the camera will enter standby mode. If no operations are performed for another
three minutes, the camera will turn off automatically (the auto off function).
Pressing the power switch, or the shutter-release button, while the monitor is off in standby mode
will reactivate the monitor.
The time allowed to elapse from before the camera enters standby mode can be changed from the
Auto off option (A 122) in the setup menu (A 111).
15
Page 28
Setting Display Language, Date and Time
A language-selection dialog is displayed the first time the camera is turned on.
1 Press the power switch to turn on the camera.
The power-on lamp (green) will light for a moment and
the monitor will turn on.
First Steps
2 Use the multi selector to choose
the desired language and press
the k button.
For information on using the multi selector,
see “The Multi Selector” (A 9).
3 Choose Yes and press the k button.
If No is selected, the date and time will not be set.
4 Press the multi selector J or K to select your
home time zone (A 117) and press the k
button.
D Daylight Saving Time
If daylight saving time is in effect, press the multi selector H in the
time zone selection screen displayed in step 4 to turn on the
daylight saving time option.
When the daylight saving time option is enabled, W is displayed at
the top of the monitor. To turn off the daylight saving time option,
press I.
16
Date
Set time and date?
No
Ye s
Cancel
London
Casablanca
Back
London
Casablanca
Back
Page 29
Setting Display Language, Date and Time
5 Edit the date and time.
Press H or I to edit the highlighted item.
Press K to move the highlight in the following order.
D (day) ➝ M (month) ➝ Y (year) ➝ hour ➝ minute ➝
DMY (the order in which the day, month, and year are
displayed)
Press J to return to the previous item.
6 Choose the order in which the day, month and
year are displayed and press the k button or
K.
press
The settings are applied and monitor display exits to
shooting mode.
Date
DYM
01200901
Date
DYM
15200905
0000
1430
Edit
Edit
First Steps
D Changing the Date and Time
• Select Date from the Date item (A 115) in the setup menu (A 111) to change the current date
and time and follow the procedure described in step 5 above.
• Select Time zone from the Date item in the setup menu to change the time zone and daylight
saving time settings (A 115).
17
Page 30
Inserting Memory Cards
Image, sound, and movie files are stored in the camera’s internal memory
(approximately 44 MB) or on removable Secure Digital (SD) memory cards
(available separately) (A 129).
If a memory card is inserted in the camera, data are automatically stored on
the memory card and data recorded to the memory card can be played back,
deleted or transferred. Remove the memory card to store data in the internal
First Steps
memory, or play back, delete or transfer data from the internal memory.
1 Confirm the power-on lamp and the monitor
are off and open the battery-chamber/
memory card slot cover.
Be sure to turn off the camera before opening the
battery-chamber/memory card slot cover.
2 Insert the memory card.
Slide the memory card in correctly until it clicks into
place.
Close the battery-chamber/memory card slot cover.
B Inserting Memory Cards
Inserting the memory card upside down or backwards
could damage the camera or the memory card. Be sure to
check the memory card is in the correct orientation.
Removing Memory Cards
Before removing memory cards, turn the camera off
and confirm that the power-on lamp and monitor are
off. Open the battery-chamber/memory card slot cover
and press the card in 1 to partially eject the card. The
card can then be removed by hand. Do not attempt to
remove the card at an angle 2.
18
Page 31
Inserting Memory Cards
B Formatting Memory Cards
If the message at right is displayed, the memory card must be
formatted before use (A 123). Note that f ormatting permanently deletes all pictures and other data on the memory card. Be sure
to make copies of any pictures you wish to keep before formatting
the memory card.
Use the multi selector to choose Yes and press the k button. The
confirmation dialog will be displayed. To start formatting, choose
Format and press the k button.
• Do not turn the camera off or open the battery-chamber/memory card slot cover until formatting
is complete.
• The first time you insert the memory cards used in other devices into the COOLPIX S220/S225, be
sure to format them using this camera (A 123).
Card is not formatted.
Format card?
No
Ye s
B The Write Protect Switch
Memory cards are equipped with a write p rotect switch. When
this switch is in the “lock” position, data cannot be written to,
or deleted from, the memory card. If the switch is in the “lock”
position, unlock it by sliding the switch to the “write” position
to record or delete pictures, or to format the memory card.
Write protect switch
B Memory Cards
• Use only Secure Digital memory cards.
• Do not perform the following during formatting, while data is being written to or deleted from the
memory card, or during data transfer to a computer. Failure to observe this precaution could result
in the loss of data or in damage to the camera or memory card:
- Take out the battery or memory card
-Turn off the camera
- Disconnect the AC adapter
• Do not format the memory card using a computer.
• Do not disassemble or modify.
• Do not drop, bend, or expose to water or strong physical shocks.
• Do not touch the metal terminals with your fingers or metal objects.
• Do not affix labels or stickers to the memory card.
• Do not leave in direct sunlight, closed vehicles or areas exposed to high temperatures.
• Do not expose to humidity, dust, or to corrosive gases.
First Steps
19
Page 32
Basic Photography and Playback: Auto Mode
Step 1 Turn the Camera On and Select A (Auto) Mode
This section describes how to take pictures in A (auto) mode, an automatic,
“point-and-shoot” mode recommended for first-time users of digital cameras.
1 Press the power switch to turn on the camera.
The power-on lamp (green) will light for a moment and
the monitor will turn on. The lens will also extend.
Proceed to step 4 when A is displayed.
Basic Photography and Playback: Auto Mode
2 Press the A button.
3 Press the multi selector H or I to choose A
and press the k button.
The camera enters A (auto) mode.
4 Check the battery level and the number of
exposures remaining.
Battery Level
MonitorDescription
NO INDICATORBattery fully charged.
B
N
Battery
exhausted.
Number of Exposures Remaining
The number of pictures that can be stored depends on the capacity of the internal
memory or memory card and image mode setting (A 94).
20
Battery low. Prepare to charge or
replace the battery.
Cannot take pictures. Recharge or
replace with a fully charged
battery.
Auto mode
Battery level indicator
181818
Number of exposures
remaining
Page 33
Step 1 Turn the Camera On and Select A (Auto) Mode
Indicators Displayed in A (Auto) Mode
Shooting mode
A displayed in A
(auto) mode.
Internal memory indicator
Indicates that images will be stored on the
camera’s internal memory (approximately 44 MB).
When a memory card is inserted in the camera,
C does not appear and images will be stored on
the memory card.
Motion detection icon
The effects of the subject
movement and camera shake
are reduced.
181818
Image mode
The combination of image
size and image quality
(compression) is displayed.
The default setting is i
Normal (3,648 × 2,736).
The indicators and photo info displayed during shooting and playback will turn off
after a few seconds (A 118). When the monitor has turned off in standby mode
to save power, press the power switch or the shutter-release button to reactivate it
(A 122).
D Functions Available in A (Auto) Mode
In A (auto) mode, macro mode (A 31) and exposure compensation (A 32) can be applied and
pictures can be taken using the flash mode (A 28) and self-timer (A 30). Pressing the d button
in A (auto) mode allows you to specify settings for all shooting menu items (A 92) depending
upon the shooting situations.
D Motion Detection
When Auto (default setting) is selected for the Motion detection option (A 120) in the setup
menu and the camera detects camera shake and subject movement, the camera increases shutter
speed to reduce blurring.
When the camera detects camera shake or subject movement and increases shutter speed, the
motion detection icon will turn green.
D Electronic Vibration Reduction
When the flash mode (A 28) is set to W (off) or Y (slow sync) with Electronic VR (A 113) in the
setup menu set to Auto, the R icon may appear in the monitor. The appearance of R indicates
shooting conditions in which the effects of camera shake can be pronounced. In these situations,
the camera reduces the effects of camera shake in pictures before recording them.
Basic Photography and Playback: Auto Mode
21
Page 34
Step 2 Frame a Picture
1 Ready the camera.
Hold the camera steadily in both hands, keeping your
fingers and other objects away from the lens, flash,
microphone, and speaker.
When taking pictures in “tall” orientation, turn the camera
so that the built-in flash is above the lens.
Basic Photography and Playback: Auto Mode
2 Frame the picture.
When the camera recognizes a face looking toward the
camera, that face will be framed by a yellow double
border (default setting). If more than one face is
recognized, the face nearest to the camera will be framed
by a double border and the rest by a single border.
AF area will not appear when shooting pictures of subjects other than people, or
framing a subject with which no face is recognized
181818
.
22
Page 35
Using the Zoom
Use the zoom control to activate optical zoom. Rotate
the zoom control to g to zoom in so that the subject
fills a larger area of the frame, or f to zoom out, thus
increasing the area visible in the frame.
A zoom indicator is displayed at the top of the monitor
when the zoom control is rotated.
Step 2 Frame a Picture
Zoom out
Zoom in
Basic Photography and Playback: Auto Mode
Optical
zoom
Digital
zoom
Digital Zoom
When the camera is zoomed in to the maximum optical zoom position, rotating
and holding the zoom control at g triggers digital zoom. The subject is magnified
up to 4× the maximum optical zoom ratio.
Focus will be on the center of the screen (without active focus area display) when
digital zoom is in effect.
Maximum optical zoomDigital zoom is
in effect.
C Digital Zoom and Interpolation
Unlike optical zoom, digital zoom uses a digital imaging process known as interpolation to magnify
images, resulting in slight deterioration of picture quality.
Interpolation is applied at zoom positions beyond V. When zoom is increased beyond the V
position, interpolation is initiated and the zoom indicator turns yellow to indicate that interpolation
is being applied. The position of V moves to the right as image size decreases, allowing for
confirmation of the zoom positions at which shooting without interpolation is possible at the
current image mode setting.
When an image size is small
Digital zoom can be disabled from the Digital zoom option (A 121) in the setup menu (A 111).
23
Page 36
Step 3 Focus and Shoot
F3.1
1/125
F3.1
1/125
1 Press the shutter-release button halfway.
When a face looking toward the camera is recognized:
Camera will focus on the face surrounded by the double
border active focus area. When the subject is in focus, the
double border glows green.
Basic Photography and Playback: Auto Mode
When shooting pictures of subjects other than people or
framing a subject with which no face is recognized:
Camera automatically selects the focus area (one of nine)
containing the subject closest to the camera. When the
subject is in focus, the active focus area glows green.
When digital zoom is used, the focus area is not displayed
and the camera focuses at the center of the frame. Once focus has been acquired, the
focus indicator (A 6) will glow green.
When you press the shutter-release button halfway, the shutter speed and aperture
values also appear.
Focus and exposure remain locked while the shutter-release button is pressed halfway.
While the shutter-release button is pressed halfway, the double border for face
recognition may blink, or the focus area or focus indicator may blink red. All of these
cases indicate that the camera does not focus. Change the composition and press the
shutter-release button halfway again.
See “AF Area Mode” (A 100) or “Face Priority” (A 102) for more information about
Face Priority.
2 Press the shutter-release button the rest of
the way down.
The shutter is released and the picture will be recorded to
the memory card or internal memory.
F3.1
F3.11/125
1/125
Shutter speed Aperture
F3.1
F3.11/125
1/125
Shutter speed Aperture
24
Page 37
Step 3 Focus and Shoot
Exi t
B During Recording
While pictures are being recorded, the number of exposures remaining will blink. Do not open the
battery-chamber/memory card slot cover while pictures are being recorded. Cutting power or
removing the memory card in these circumstances could result in loss of data or in damage to the
camera or card.
B Autofocus
Autofocus may not perform as expected in the following situations. In some rare cases, the subject
may not be in focus despite the fact that the active focus area and the focus indicator glow green:
• Subject is very dark
• Objects of sharply differing brightness are included in the scene (e.g. the sun is behind the subject
and is in deep shadow)
• No contrast between the subject and surroundings (e.g. when the subject is standing in front of a
white wall, wearing a white shirt)
• Several objects are at different distances from the camera (e.g. the subject is inside a cage)
• Subject is moving rapidly
In the situations noted above, try pressing the shutter-release button halfway to refocus several
times, or focus on another subject and use focus lock (A 101). When using focus lock, be sure that
the distance between the camera and the subject with which focus was locked is the same as that
for the actual subject.
C Blink Warning
If the blink warning screen is displayed shortly after a picture is
taken in face priority mode, the eyes of human subjects may have
been closed when the picture was taken. Check the picture and
decide whether or not another picture should be taken.
• The portrait subject, whose eyes may have been closed when the
picture was taken, will be framed by a yellow border in the blink
warning screen.
• Press the k button, or press the shutter-release button, to return
to shooting mode.
See “Blink Warning” (A 124) or “Operating the Blink Warning Screen” (A 125) for more
information.
Did someone blink?
Exit
Exit
Basic Photography and Playback: Auto Mode
D Flash
If the subject is poorly lit, the flash may fire by pressing the shutter-release button all the way down
(A 28).
25
Page 38
Step 4 Playing Back and Deleting Pictures
15/05/2009 15:30
0004.JPG
44
Playing Back Pictures (Playback Mode)
Press the c button.
The last picture taken will be displayed in fullframe playback mode.
Press the multi selector H, I, J or K to view
additional pictures.
Pictures may be displayed briefly at low
Basic Photography and Playback: Auto Mode
resolution while being read from the memory
card or internal memory.
Press the A button or the shutter-release button to switch to shooting mode.
When playing back pictures stored on the camera’s internal
memory, C appears. When a memory card is inserted in the
camera, C does not appear and images stored on the
memory card are played back.
Deleting Pictures
1 Press the l button to delete the
picture currently displayed in the
monitor.
A button
15/05/2009 15:30
15/05/2009 15:30
0004.JPG
0004.JPG
Internal memory
indicator
44
2 Use the multi selector
to select Yes and press
the k button.
26
To exit without deleting the
picture, choose No and press
the k button.
Erase 1 image?
No
Ye s
Done
Page 39
Step 4 Playing Back and Deleting Pictures
C Options Available in Playback Mode
The following options are available in full-frame playback mode.
OptionUseDescriptionA
Rotate the zoom control to g to enlarge
Playback zoom
View thumbnails/
apply calendar display
Add favorite pictures
Change playback mode
Switch to shooting mode
g (i)
f (h)
k
c
A
the picture up to 10×.
Press the k button to return to full-frame
playback mode.
Rotate the zoom control to f to display
4, 9 or 16 picture thumbnails or to apply
the calendar display.
Add the picture currently displayed to
favorite pictures.
Press the c button to display the
playback-mode selection menu and
change to list by date, auto sort, or
favorite pictures mode.
Press the A button or the shutter-release
button to switch to the shooting mode
selected in the shooting-mode selection
menu.
49
47
65
57, 60,
66
26
C Pressing the c Button to Turn On the Camera
When the camera is off, holding down the c button will turn the camera on in playback mode. The
lens will not extend.
C Viewing Pictures
• Pictures stored in the internal memory can only be viewed if no memory card is inserted.
• When pictures in which a face was detected during shooting are displayed in full-frame playback,
the pictures may be automatically rotated for playback display, depending upon the orientation of
the detected face.
• When the monitor has turned off in standby mode to save power, press the c button or the
power switch to reactivate it (A 122).
C Deleting the Last Picture Taken While in Shooting Mode
In shooting mode, press the l button to delete the last picture
taken.
Erase 1 image?
Basic Photography and Playback: Auto Mode
No
Ye s
D Deleting Multiple Pictures
Multiple pictures can be deleted from the Delete option (A 108) in the playback menu (A 105),
the list by date menu (A 59), the auto sort menu (A 62), or the favorite pictures menu (A 68).
27
Page 40
Using the Flash
The flash has a range of 0.6-4.6 m (2-15 ft.) when the camera is zoomed out all the
way. With maximum optical zoom applied, the range is 0.6-2.5 m (2-8 ft.) (when
ISO sensitivity is set to Auto). The following flash modes are available.
U Auto
Flash fires automatically when lighting is poor.
VAuto with red-eye reduction
Reduce “red-eye” in portraits (A 29).
Basic Photography and Playback: Auto Mode
WOff
Flash will not fire even when lighting is poor.
XFill flash
Flash fires when a picture is taken. Use to “fill-in” (illuminate) shadows and backlit
subjects.
YSlow sync
U (auto) is combined with slow shutter speed.
Flash illuminates main subject; slow shutter speeds are used to capture
background at night or under dim light.
Setting the Flash Mode
1 Press m (flash mode).
The flash menu is displayed.
2 Use the multi selector to choose the desired
flash mode and press the k button.
The icon for the selected flash mode is displayed at the
top of the monitor.
When U (auto) is applied, D is only displayed for a
few seconds, regardless of Photo info settings (A 118).
If a setting is not applied by pressing the k button
within a few seconds, the selection will be cancelled.
28
Flash mode
Page 41
Using the Flash
B Shooting When Lighting is Poor and the Flash is Disabled (W)
• Use of a tripod is recommended to stabilize the camera during shooting and avoid the effects of
camera shake.
• The E indicator is displayed when the camera automatically increases sensitivity. Pictures taken
when E is displayed may be slightly mottled.
B Note on Using the Flash
When using the flash, reflections from dust particles in the air may appear as bright spots in pictures.
To reduce these reflections, set the flash to W (Off).
C The Flash Lamp
The flash lamp indicates flash status when the shutterrelease button is pressed halfway.
• On: Flash will fire when picture is taken.
• Blinks: Flash charging. Wait a few seconds and try
again.
• Off: Flash will not fire when picture is taken.
If the battery is low, the monitor display will turn off, and remain off, until the flash is fully charged.
C The Flash Mode Setting
The default flash mode setting varies with shooting mode.
• A (auto): U (auto)
• C (scene): varies with the selected scene mode (A 34)
• a (smile): fixed at W (off) when On is selected for Blink proof, U (auto) when Off is selected
for Blink proof (A 46)
The flash mode setting applied in A (auto) mode is stored in the camera’s memory even after the
camera is turned off, and reapplied the next time A (auto) mode is selected.
C Red-eye Reduction
This camera uses advanced red-eye reduction (“In-Camera Red-Eye Fix”). The flash fires several times
at low intensity (pre-flash) before the main flash, reducing “red eye.” The camera then analyzes the
picture; if red-eye is detected, the affected area will be processed to further reduce red-eye before
the picture is saved. Note that because there is a slight lag between the shutter-release button being
pressed and the picture being shot, this mode is not recommended when a quick shutter response
is required. The time before the next picture can be shot also increases slightly. Advanced red-eye
reduction may not produce the desired results in all situations. In extremely rare instances, areas not
subject to red-eye may be affected by advanced red-eye reduction processing; in these cases,
choose another mode and try again.
Basic Photography and Playback: Auto Mode
29
Page 42
Taking Pictures with the Self-timer
F3.1
1/125
The camera is equipped with a ten-second and two-second timer for self-portraits.
This feature is useful for reducing the effects of camera shake that occurs when
pressing the shutter-release button. When using the self-timer, use of a tripod is
recommended.
1 Press n (self-timer).
The self-timer menu is displayed.
Basic Photography and Playback: Auto Mode
2 Use the multi selector to choose 10 s or 2 s
and press the k button.
10 s (ten seconds): Suited for important occasions
2 s (two seconds): Suited for preventing camera shake
The mode selected for self-timer is displayed.
If a setting is not applied by pressing the k button within a few seconds, the selection
will be cancelled.
(such as weddings)
Self-timer
3 Frame the picture and press the
shutter-release button halfway.
Focus and exposure will be set.
1/125
F3.1
F3.11/125
4 Press the shutter-release button the
rest of the way down.
The self-timer starts, and the number of
seconds remaining before the shutter is
released is displayed in the monitor. The selftimer lamp blinks while the timer is counting
down. About one second before the shutter is
released, the lamp remains lit and stops
blinking.
When the shutter is released, the self-timer will
be set to k.
To stop the timer before a picture is taken, press
30
the shutter-release button again.
Page 43
Macro Mode
Macro mode is used for taking pictures of objects as close as 10 cm (4 in.). Note
that the flash may be unable to light entire subject at distances of less than 60 cm
(2 ft.).
1 Press p (macro mode).
The macro menu is displayed.
2 Use the multi selector to choose ON and press
the k button.
The macro mode icon (F) is displayed.
If a setting is not applied by pressing the k button
within a few seconds, the selection will be cancelled.
Macro mode
3 Rotate the zoom control to frame the picture.
The camera can focus at a distance of 10 cm (4 in.) at the
zoom position at which F glows green (the zoom
indicator is positioned before K).
Basic Photography and Playback: Auto Mode
C Macro Mode
In macro mode, the camera focuses continuously until the shutter-release button is pressed halfway
to lock focus and exposure.
C The Macro Mode Setting
The macro mode setting applied in A (auto) mode is stored in the camera’s memory even after the
camera is turned off, and reapplied the next time A (auto) mode is selected.
31
Page 44
Exposure Compensation
Exposure compensation is used to alter exposure from the value suggested by the
camera to make pictures brighter or darker.
1 Press o (exposure compensation).
The exposure compensation guide is displayed.
Basic Photography and Playback: Auto Mode
2 Use the multi selector to adjust exposure and
press the k button.
When the picture is too dark: adjust the exposure
compensation to “+” side.
When the picture is too bright: adjust the exposure
compensation to “–” side.
Exposure compensation can be set to values between
-2.0 and +2.0 EV.
If a setting is not applied by pressing the k button within a few seconds, the selection
will be cancelled.
Exposure compensation
3 The setting is applied.
The value is displayed with the H icon in the monitor.
181818
C Exposure Compensation Value
The exposure compensation value applied in A (auto) mode is stored in the camera’s memory even
after the camera is turned off, and reapplied the next time A (auto) mode is selected.
D Using Exposure Compensation
The camera tends to lower exposure when the frame is dominated by brightly lit objects and to
increase exposure when the frame is mostly dark. Positive compensation may therefore be required
to capture the brilliancy of very bright objects that fill the frame (for example, sunlit expanses of
water, sand, or snow) or when the background is much brighter than the main subject. Negative
compensation may be called for when large areas of the frame contain very dark objects (for
example, a swath of dark green leaves) or when the background is much darker than the main
subject.
32
Page 45
Shooting Suited for the Scene
F3.1
1/125
Shooting in Scene Mode
Camera settings are automatically optimized for the selected subject type. The
following scene modes are available.
x
Scene auto selector
f Party/indoor g Beach/snow h Sunseti Dusk/dawn j
k Close-upu Foodl Museumm
o Backlightp
* See “Voice Recordings” (A 74) for details.
Setting the Scene Mode
b Portraitc Landscaped Sportse Night portrait
Night landscape
Fireworks show
Panorama assistEVoice recording*
n Copy
1 Press the A button in shooting
mode to display the shooting-mode
selection menu and press the multi
selector H or I to select a scene
icon.
The icon for the last scene mode selected is
displayed. The default setting is x (Scene
auto selector).
2 Press the multi selector K and press
H, I, J, or K to choose the
desired scene, and then press the
k button.
3 Frame the subject and shoot.
D Image Mode
When the d button is pressed in scene mode, Image mode
(A 93) can be adjusted. Change made to this setting applies to all
shooting modes (except for movie menu).
Scene auto selector
1/125
Image mode
High (3648 )
Normal (3648)
Normal (2592)
Normal (2048)
PC screen (1024)
Exit
Beach/snow
F3.1
F3.11/125
Shooting Suited for the Scene
33
Page 46
Shooting in Scene Mode
Features
x Scene auto selector
By simply framing a picture, the camera automatically selects the optimum scene mode.
See “Shooting in the Scene Mode Selected by the Camera (Scene Auto Selector)” (A 40)
for more information.
mU
1
The camera automatically selects the optimum flash mode setting for the scene mode it
has selected. Can be changed to W.
2
Other settings can be selected.
3
Changed to On when the camera selects Close-up scene mode.
Shooting Suited for the Scene
b Portrait
1
nOff
Use this mode for portraits in which the main subject stands
out clearly. Portrait subjects exhibit smooth, natural-looking
skin tones.
• The camera detects and focuses on a face looking toward
the camera. See “Face Priority” (A 102) for more
information.
• If the camera detects a smiling face of the subject, the smile
indicator increases or decreases.
• If more than one face is recognized, focus will be on the face
nearest to the camera.
• If no faces are recognized, focus will be on the center of the
screen.
• Digital zoom is not available.
mV*nOff*pOffo0.0*
* Other settings can be selected.
2
pOff
3
o0.0
Smile indicator
2
181818
O: For those scene modes with O, use of a tripod is recommended.
Q: For those scene modes with Q, noise reduction is carried out automatically so the time taken to
save an image will be longer than usual.
C Icons Used for Descriptions
The following icons are used for descriptions in this section: m, flash mode (A 28); n, self-timer
(A 30); p, macro mode (A 31); o, exposure compensation (A 32).
34
Page 47
Shooting in Scene Mode
c Landscape
Use this mode for vivid landscapes and cityscapes.
• Camera focuses at infinity. The focus area or focus indicator
(A 6) always glows green when the shutter-release button
is pressed halfway. Note, however, that objects in the
foreground may not always be in focus.
mWnOff*pOffo0.0*
* Other settings can be selected.
d Sports
Use this mode for dynamic action shots that freeze the action
in a single shot and record motion in a series of pictures.
• The camera focuses continuously until focus is locked by
pressing the shutter-release button halfway.
• While the shutter-release button is held down, pictures are
taken at rate of up to about 1.2 frames per second (fps)
when image mode is set to i Normal (3648). This rate is
maintained for up to 6 pictures.
• The maximum frame rate with continuous shooting may
vary depending upon the current image mode setting and
the memory card used.
• Motion detection (A 120) is not activated.
mWnOffpOffo0.0*
* Other settings can be selected.
e Night portrait
OQ
Use this mode to achieve a natural balance between the main
subject and background lighting in portraits taken at night.
• The camera detects and focuses on a face looking toward the
camera. See “Face Priority” (A 102) for more information.
• If more than one face is recognized, focus will be on the face
nearest to the camera.
• If no faces are recognized, focus will be on the center of the
screen.
• Digital zoom is not available.
• Motion detection (A 120) is not activated.
mV
1
Fill flash with slow sync and red-eye reduction.
2
Other settings can be selected.
1
nOff
2
pOffo0.0
Shooting Suited for the Scene
2
35
Page 48
Shooting in Scene Mode
f Party/indoor
Captures the effects of candlelight and other indoor
background lighting.
• Camera focuses on subject in the center of the frame.
• As pictures are easily affected by camera shake, hold the
camera steadily. Use of a tripod is recommended for dark
locations.
mV
1
The flash may change to slow sync with red-eye reduction. Other settings can be selected.
2
Other settings can be selected.
g Beach/snow
Shooting Suited for the Scene
1
nOff
2
pOffo0.0
Captures the brightness of such subjects as snowfields,
beaches, or sunlit expanses of water.
• Camera focuses on subject in the center of the frame.
mU*nOff*pOffo0.0*
* Other settings can be selected.
2
h Sunset
O
Preserves the deep hues seen in sunsets and sunrises.
• Camera focuses on subject in the center of the frame.
mW*nOff*pOffo0.0*
* Other settings can be selected.
O: For those scene modes with O, use of a tripod is recommended.
Q: For those scene modes with Q, noise reduction is carried out automatically so the time taken to
save an image will be longer than usual.
36
Page 49
Shooting in Scene Mode
i Dusk/dawn
Preserves the colors seen in the weak natural light before
sunrise or after sunset.
• Camera focuses at infinity. The focus area or focus indicator
(A 6) always glows green when the shutter-release button
is pressed halfway. Note, however, that objects in the
foreground may not always be in focus.
• Motion detection (A 120) is not activated.
mWnOff*pOffo0.0*
* Other settings can be selected.
j Night landscape
Slow shutter speeds are used to produce stunning night
landscapes.
• Camera focuses at infinity. The focus area or focus indicator
(A 6) always glows green when the shutter-release button
is pressed halfway. Note, however, that objects in the
foreground may not always be in focus.
• Motion detection (A 120) is not activated.
mWnOff*pOffo0.0*
* Other settings can be selected.
k Close-up
Photograph flowers, insects and other small objects at close
range.
• Macro mode (A 31) will be turned on and the camera
automatically zooms to the position at the closest distance
at which the camera can focus.
• The camera can focus at a distance of 10 cm (4 in.) at the
zoom position at which F glows green (the zoom indicator is positioned before K).
The closest possible shooting position may vary according to the zoom position.
• AF area mode is set to Manual (A 100). Press the k button to choose the focus area
in which focus is acquired.
• The camera focuses continuously until focus is locked by pressing the shutter-release
button halfway.
OQ
OQ
Shooting Suited for the Scene
mU*nOff*pOno0.0*
* Other settings can be selected. Note that the flash may be unable to light entire subject at
distances of less than 60 cm (2 ft.).
37
Page 50
Shooting in Scene Mode
u Food
Use when taking pictures of food. See “Taking Pictures in Food
Mode” (A 41) for details.
• AF area mode is set to Manual (A 100). Press the k
button to choose the focus area in which focus is acquired.
XWnOff*pOno0.0*
* Other settings can be selected.
l Museum
Shooting Suited for the Scene
Use indoors where flash photography is prohibited (for
example, in museums and art galleries) or in other settings in
which you do not want to use the flash.
• Camera focuses on subject in the center of the frame.
• BSS (best shot selector) can be used to shoot (A 97).
• Motion detection (A 120) is not activated.
mWnOff*pOff*o0.0*
* Other settings can be selected.
m Fireworks show
Slow shutter speeds are used to capture the expanding burst
of light from a firework.
• Camera focuses at infinity. The focus indicator (A 6) always
glows green when the shutter-release button is pressed
halfway. Note, however, that objects in the foreground may
not always be in focus.
• Motion detection (A 120) is not activated.
mWnOffpOffo0.0
O: For those scene modes with O, use of a tripod is recommended.
38
O
Page 51
Shooting in Scene Mode
n Copy
Provides clear pictures of text or drawings on a white board or
in print.
• Camera focuses on subject in the center of the frame.
• Use macro mode (A 31) to focus at short ranges.
• Colored text and drawings may not show up well.
mW*nOff*pOff*o0.0*
* Other settings can be selected.
o Backlight
Use when light is coming from behind subject, throwing
features or details into shadow. The flash fires automatically to
“fill in” (illuminate) shadows.
• Camera focuses on subject in the center of the frame.
• Motion detection (A 120) is not activated.
mmnOff*pOffo0.0*
* Other settings can be selected.
p Panorama assist
Shooting Suited for the Scene
Use when taking a series of pictures that will later be joined to form a single panorama using
the supplied Panorama Maker software. See “Taking Pictures for a Panorama” (A 43) for
details.
mW*nOff*pOff*o0.0*
* Other settings can be selected.
39
Page 52
Shooting in Scene Mode
Shooting in the Scene Mode Selected by the Camera
(Scene Auto Selector)
By simply framing a picture, the camera automatically selects the optimum scene
mode for simpler shooting.
When the camera is aimed at a subject in x scene auto selector scene mode, the
camera automatically selects one of the following scene modes:
• Auto (A 20) • Portrait (A 34) • Landscape (A35)
• Night portrait (A 35)• Night landscape (A 37)• Close-up (A 37)
• Backlight (A 39)
1 Press the A button in shooting
Shooting Suited for the Scene
mode to display the shooting-mode
selection menu and use the multi
selector to select x (Scene auto
selector) (A 33).
The camera enters scene auto selector scene
mode.
Scene auto selector
2 Frame the subject and take the picture.
When the camera automatically selects a scene mode,
the shooting mode icon changes to that for the scene
mode currently enabled.
d: Autog: Night landscape
e: Portraiti: Close-up
f: Landscapej: Backlight
h: Night portrait
Press the shutter-release button halfway to set focus and exposure.
Press the shutter-release button the rest of the way down to take the picture.
B Note on Scene Auto Selector Scene Mode
Depending upon shooting conditions, the camera may not select the desired scene mode. Should
this occur, switch to A (auto) mode (A 20) or select the desired scene mode manually (A 33).
C Flash Mode in Scene Auto Selector Scene Mode
U (Auto) (default setting) and W (Off) flash mode settings can be applied (A 28).
• When U (Auto) is applied, the camera automatically selects the optimum flash mode setting
for the scene mode it has selected.
• When W (Off) is applied, the flash does not fire, regardless of shooting conditions.
C Functions Restricted in Scene Auto Selector Scene Mode
• Digital zoom is not available.
• The macro mode button on the multi selector (A 9, 31) is disabled.
• AF area mode (A 100) is set to Auto in i (Close-up) mode.
40
181818
Page 53
Taking Pictures in Food Mode
F3.1
1/125
Use this mode to take pictures of food.
1 Press the A button in shooting
mode to display the shooting-mode
selection menu and use the multi
selector to select u (Food) (A 33).
Macro mode (A 31) will be turned on and
the camera automatically zooms to the
position at the closest distance at which the
camera can focus.
Shooting in Scene Mode
Food
2 Press the multi selector H or I to choose
white balance.
Press H to increase the amount of red, or I to increase
the amount of blue.
3 Frame the picture.
The camera can focus at distances as close as 10 cm (4 in.)
at the wide-angle zoom position at which F and the
zoom indicator glow green (the zoom indicator is before
G). The closest distance at which the camera can focus
varies depending upon zoom position.
AF area mode is set to Manual (A 100). Press the k
button to move the focus area. Press the multi selector
H, I, J, or K to select a focus area and press the k
button again to activate the selected focus area.
Self-timer (A 30) and exposure compensation (A 32)
settings can be adjusted while the focus area is locked.
4 Press the shutter-release button to take the
picture.
Focus is locked when the shutter-release button is
pressed halfway, and a picture is taken when the shutterrelease button is pressed the rest of the way down.
When the camera is unable to focus, the focus area blinks
red. Change the composition and press the shutterrelease button halfway again.
1/125
F3.1
F3.11/125
Shooting Suited for the Scene
181818
181818
41
Page 54
Shooting in Scene Mode
B Note on Food Mode
Flash mode is disabled. Macro mode setting (A 31) is fixed at ON.
C White Balance Setting in Food Mode
• Increasing the amount of red or blue will decrease illumination effects.
• Cha nging whit e balance in food mode will n ot affect white balan ce in the sh ooting men u (A 95).
• The white balance setting applied in food mode is stored in the camera’s memory even after the
camera is turned off, and reapplied the next time food mode is selected.
Shooting Suited for the Scene
42
Page 55
Shooting in Scene Mode
18
18
End
Taking Pictures for a Panorama
The camera focuses on the subject in the center of the frame. Use a tripod for the
best results.
1 Press the A button in shooting
mode to display the shooting-mode
selection menu and use the multi
selector to select p (Panorama
assist) (A 33).
Panorama direction icons (I) are displayed
to show the direction in which pictures will
be joined.
Panorama assist
2 Use the multi selector to choose the direction
and press the k
Select how pictures will be joined together in the
completed panorama; right (I), left (J), up (K) or down
(L).
The yellow panorama direction icon (I I) will move to
the direction pressed and press the k button to choose
the direction. A white panorama direction icon (I) will be displayed in the chosen
direction.
Apply flash mode (A 28), self-timer (A 30), macro mode (A 31) and exposure
compensation (A 32) settings with this step, if necessary.
Press the k button again to reselect the direction.
button.
18
18
3 Take the first picture.
One third of the last picture taken will be
displayed partially transparent.
Shooting Suited for the Scene
4 Take the next picture.
Compose the next picture so that one-third of
the frame overlaps the previous picture.
Repeat until you have taken the necessary
number of pictures to complete the scene.
End
End
18
18
171717
43
Page 56
Shooting in Scene Mode
End
End
5 Press the k button when shooting is
complete.
The camera returns to step 2.
End
End
Shooting Suited for the Scene
B Panorama Assist
Flash mode, self-timer, macro mode and exposure compensation settings cannot be adjusted after
the first picture is taken. Pictures cannot be deleted, nor can zoom or image mode setting (A 93)
be adjusted until all pictures in the series have been taken.
Shooting for the panorama series is terminated if the auto off function (A 122) initiates standby
mode during shooting. Setting the time allowed to elapse before the auto off function is enabled to
a longer setting is recommended.
D R Indicator
R is displayed to indicate that exposure, white balance, and
focus have been locked at the values set with the first shot. All
pictures taken in a panorama series have the same exposure, white
balance, and focus settings.
141414
D Panorama Maker
Install Panorama Maker from the supplied Software Suite CD. Transfer pictures to a computer
(A 80) and use Panorama Maker (A 83) to join them in a single panorama.
D More Information
See “Image/Sound File and Folder Names” (A 130) for more information.
44
End
End
171717
Page 57
Automatic Shooting of a Smiling Face
Shooting in Smile Mode
The camera detects that a face recognized with face priority is smiling and shoots
automatically.
1 Enter smile mode by pressing the
A button in shooting mode and
selecting a (press the multi
selector H or I), and then
Smile
pressing the k button.
2 Frame a picture.
Point the camera at the subject.
When the camera detects a face looking toward the
camera, the focus area containing the face will be
displayed with a yellow double border. The camera
focuses on the face framed by the double border. The
double border will glow green and focus will be locked.
Up to three faces can be detected. When the camera detects more than one face, the
face closest to the center of the frame is framed by a double border and the others by
single borders.
181818
3 The shutter is automatically released.
If the camera detects that the face framed by the double border is smiling, the shutter is
automatically released.
When the camera detects a face, the self-timer lamp (A 4) blinks. Immediately after the
shutter is released with detection of a smiling face, the self-timer lamp flickers.
Each time the shutter is released, the camera automatically take pictures using the
recognizing face and the detecting smiling face features repeatedly.
At default settings, the blink proof function is activated (A 46).
Automatic Shooting of a Smiling Face
4 Exit smile mode by pressing the A button.
Change to another shooting mode.
C Face Priority and Smiling Face Detection Features
When the camera is pointed at a face looking toward the camera in smile mode, the face is
automatically recognized and the smiling face of the recognized one is detected.
• In some shooting conditions, face recognition does not work and faces cannot be detected.
• See “Face Priority” (A 102) for more information.
45
Page 58
Shooting in Smile Mode
Blink Proof Function
The blink proof function is available in smile mode.
Each time a picture is taken, the camera automatically takes two consecutive
shots. Of the two shots, the shot in which the subject’s eyes are open takes priority
and is saved.
• If the camera detects that it has saved a picture in
which the subject’s eyes may have closed, the
warning shown at right is displayed for a few
seconds.
One or more subjects may have
closed their eyes.
• To enable or disable the blink proof function, press
the d button in smile mode to display the smile
menu and select Blink proof.
• The current setting is displayed in the monitor (A 6).
Automatic Shooting of a Smiling Face
C Operation of Shutter-Release Button
Press the shutter-release button to take pictures.
• When the Face priority takes effect, the shutter can be released with the focus locked on the
recognized face even before the camera detects the subject is smiling.
• When the Face priority doesn’t take effect, the camera focuses on subject in the center of the
frame.
C Functions Available in Smile Mode
• Flash is disabled when On is selected for the Blink proof option. When Off is selected for the
Blink proof option, flash mode (A 28) is set to U (auto). Other flash modes can be selected.
• Exposure compensation (A 32) is available.
• Digital zoom is not available.
• When the d button is pressed, the smile menu is displayed and Image mode (A 93) can be
adjusted. Change made to the image mode setting applies to all shooting modes (except the
movie menu).
C Auto Power Off in Smile Mode
In smile mode, the auto power off function (A 122) is activated and the camera turns off when
either of the situations indicated below persists and no other operations are performed.
• The camera does not recognize any faces
• The camera recognized the face but cannot detect a smiling face
D More Information
See “Autofocus” (A 25) for more information.
46
Page 59
More on Playback
Viewing Multiple Pictures: Thumbnail Playback
Rotate the zoom control to f (h) in full-frame
playback mode (A 26) to display pictures in “contact
sheets” of thumbnail images. The following operations
are available while thumbnails are displayed.
ToUseDescriptionA
Choose picturesPress the multi selector H, I, J
Increase the
number of
pictures
displayed/apply
the calendar
display
Decrease the
number of
pictures
displayed
Cancel thumbnail
playback
f (h)
Rotate the zoom control to f (h) to increase
the number of picture thumbnails displayed: 4
➝ 9 ➝ 16. Rotate the zoom control to f (h)
in the 16-picture thumbnail display to apply the
calendar display (A 48), and pictures can be
found by the date on which they were taken.
Rotate the zoom control to g (i) to return to
thumbnail display.
Rotate the zoom control to g (i) to decrease
the number of picture thumbnails displayed: 16
g (i)
➝ 9 ➝ 4. Rotate the zoom control to g (i) in
4-picture thumbnail display to return to fullframe playback mode.
Press the k button.26
k
, or
A
Switch to
shooting mode
Press the A button or the shutter-release
button to return to the last shooting mode
selected.
1/ 10
K.9
–
More on Playback
–
26
C Thumbnail Playback Mode Display
When pictures for which Print set (A 90) and
Protect (A 108) settings have been configured
are selected, the icons in the illustration to the
right appear.
Movies are displayed as film frames.
Film frames
Print set icon
1/ 10
Protect icon
47
Page 60
Viewing Multiple Pictures: Thumbnail Playback
C Thumbnail Display in Auto Sort and Favorite
Pictures Mode
• When thumbnails are displayed in auto sort mode (A 60), the
category icon of the pictures will appear at the right top of the
screen.
• When thumbnails are displayed in favorite pictures mode (A 63),
the favorite pictures icon will appear at the right top of the screen.
Calendar Display
Rotate the zoom control to f (h) when the pictures
are displayed in 16-thumbnail (A 47) in playback mode
to apply the calendar display.
Selecting a date displays the first picture taken on that
date in full-frame playback mode. The dates on which
the pictures were taken are underlined in yellow.
The following operations are available in calendar display.
More on Playback
ToUseDescriptionA
1/ 3
18
Select a datePress the multi selector H, I, J
Return to fullframe playback
Return to
thumbnail display
The first picture taken on the selected date is
k
displayed full frame.
g (i)Rotate the zoom control to g (i).47
, or
K.9
B Notes on Calendar Display
• Pictures taken before the date and time have been set are recognized as having been taken on 01/
01/2009 in the calendar display.
• The l button and d button are not available in calendar display.
D List by Date Mode
Only the pictures taken on the same date can be played back in list by date mode (A 57). The
playback menu operations (A 59) are also available only for the pictures taken on the selected
dates.
48
26
Page 61
Taking a Closer Look: Playback Zoom
Rotating the zoom control to g (i) during full-frame
playback mode (A 26) zooms the current picture, with
the center of the picture displayed in the monitor.
The guide at lower right shows which portion of the
picture is enlarged.
The following operations are available while pictures are
zoomed in.
ToUseDescriptionA
Zoom ing (i)
Zoom outf (h)
Zoom increases each time the zoom control is
rotated to g (i), to a maximum of 10×.
Zoom decreases each time the zoom control is
rotated to f (h). When the magnification ratio
reaches 1×, the display returns to full-frame
playback mode.
–
–
View other areas
of picture
Switch to fullframe playback
Crop picture
Press the multi selector H, I, J, or K to move
the display area to other areas of the picture.
k
Press the k button.26
Press the d button to crop current picture to
d
contain only the portion visible in the monitor.
9
53
A
Switch to
shooting mode
Press the A button or the shutter-release
button to return to the last shooting mode
selected.
26
Pictures Taken in Face Priority
When zooming in (playback zoom) on a picture taken
using the face-priority function (A 102) by rotating
the zoom control to g (i), the picture will be enlarged
with the face detected with shooting at the center of
the monitor.
• If more than one face was detected, the picture will
be enlarged with the face on which focus was
acquired at the center of the monitor. Press the
rotary multi selector H, I, J, or K to display other faces that were detected.
• When the zoom control is rotated to g (i) or f (h) to adjust the zoom ratio,
the center of the picture (normal playback zoom display), rather than the face, is
displayed at the center of the monitor.
More on Playback
49
Page 62
Editing Pictures
Use the COOLPIX S220/S225 to edit pictures in-camera and store them as separate
files (A 130). The editing features described below are available.
Editing functionDescription
Quick retouch (A 51)
D-Lighting (A 52)
Crop (A 53)
Small picture (A 54)
C Picture Editing
• Pictures taken at an Image mode setting of P 16:9 (3584) (A 93) cannot be edited.
• The COOLPIX S220/S225 editing functions are not available for pictures taken with non-
COOLPIX S220/S225 digital cameras.
More on Playback
• If a copy created using the COOLPIX S220/S225 is viewed on a different digital camera, the picture
may not be displayed or may not be transferred to a computer.
• Editing functions are not available when there is not enough free space in the internal memory or
on the memory card.
C Restrictions on Picture Editing(✔: available, –: not available)
• Pictures cannot be edited twice with the same editing function.
• When pictures will be edited with both the quick retouch or D-lighting option and the crop or
small picture option, the quick retouch or D-lighting option should be applied first.
Easily create retouched copies in which contrast and saturation
have been enhanced.
Create a copy of the current picture with enhanced brightness
and contrast, brightening dark portions of the picture.
Enlarge the image or refine the composition and create a copy
containing only the portion visible in the monitor.
Create a small copy of pictures suitable for use on web pages or
as e-mail attachments.
2nd editing
✔✔
✔✔
D Original Pictures and Edited
• Copies created with editing functions are not deleted if the original pictures are deleted. The
original pictures are not deleted if copies created with editing functions are deleted.
• Edited copies are stored with the same recording date and time as the original.
• Print set (A 90) and Protect (A 108) settings configured for original pictures are not reflected
in their edited copies.
50
Page 63
Editing Pictures
05/15/2009 15:30
0004.JPG
44
Quick Retouch
Quick retouch can be used to easily create retouched copies in which contrast and
saturation have been enhanced. Copies created with the quick retouch option are
stored as separate files.
1 Select the desired picture from full-frame
(A 26) or thumbnail (A 47) playback mode
and press the d button.
The playback menu is displayed.
2 Use the multi selector to choose k Quick
retouch and press the k button.
The original version is displayed on the left and the edited
version is displayed on the right.
3 Press the multi selector H or I to choose the
amount of enhancement performed and
press the k button.
A new copy with enhanced contrast and saturation is
created (the time taken to create a copy might be long).
To cancel retouching, press the d button.
Copies created with the quick retouch option can be
recognized by the s icon displayed during playback.
D More Information
See “Image/Sound File and Folder Names” (A 130) for more information
Playback menu
Quick retouch
D-Lighting
Print set
Slide show
Delete
Exit
Quick retouch
Normal
BackAmount
05/15/2009 15:30
05/15/2009 15:30
0004.JPG
0004.JPG
More on Playback
44
51
Page 64
Editing Pictures
15/05/2009 15:30
0005.JPG
55
Enhancing Brightness and Contrast: D-Lighting
D-Lighting can be used to create copies with enhanced brightness and contrast,
brightening dark portions of a picture. Enhanced copies are stored as separate
files.
1 Select the desired picture from full-frame
(A 26) or thumbnail (A 47) playback mode
and press the d button.
The playback menu is displayed.
2 Use the multi selector to choose I D-Lighting
and press the k button.
The original version is displayed on the left and the edited
version is displayed on the right.
More on Playback
3 Choose OK and press the k button.
A new copy with enhanced brightness and contrast is
created.
To cancel D-Lighting, choose Cancel and press the k
button.
D-Lighting copies can be recognized by the c icon
displayed during playback.
D More Information
See “Image/Sound File and Folder Names” (A 130) for more information.
52
Playback menu
Quick retouch
D-Lighting
Print set
Slide show
Delete
Exit
D-Lighting
OK
Cancel
15/05/2009 15:30
15/05/2009 15:30
0005.JPG
0005.JPG
55
Page 65
Editing Pictures
Creating a Cropped Copy: Crop
Create a copy containing only the portion visible in the monitor when u is
displayed with playback zoom (A 49) enabled. Cropped copies are stored as
separate files.
1 Rotate the zoom control to g (i) in full-frame
playback mode to zoom in on the image.
To crop a picture displayed in “tall” (portrait) orientation,
zoom in on the picture until the black bars displayed on
the both sides of the monitor disappear. The cropped
picture will be displayed in landscape orientation.
To crop the picture in its current “tall” (portrait) orientation, first, use the Rotate image
option (A 109) to rotate the picture so that it is displayed in landscape orientation.
Next, enlarge the picture for cropping, crop the picture, and then rotate the cropped
picture back to “tall” (portrait) orientation.
2 Refine copy composition.
Rotate the zoom control to g (i) or f (h) to adjust the
zoom ratio.
Press the multi selector H, I, J or K to scroll the picture
until only the portion you want to copy is visible in the
monitor.
3 Press the d button.
More on Playback
4 Use the multi selector to choose Yes and
press the k button.
A new picture, containing only the portion visible in the
monitor, is created.
To cancel creating a cropped copy, choose No and press
the k button.
C Image Size
As the area to be saved is reduced, the image size (pixels) of the cropped copy is also reduced.
When the size of the cropped copy is 320 × 240 or 160 × 120, the small picture icon
displayed on the left of the screen in full-frame playback mode.
D More Information
See “Image/Sound File and Folder Names” (A 130) for more information.
Save this image as
displayed?
No
Ye s
B or C is
53
Page 66
Editing Pictures
Resizing Pictures: Small Picture
Create a small copy of the current picture. Small copies are stored as JPEG files with
a compression ratio of 1:16. The following sizes are available.
OptionDescription
l 640×480
m 320×240
n 160×120
Suited to television playback.
Suited to display on web pages.
Suited to e-mail attachments.
1 Select the desired picture from full-frame
(A 26) or thumbnail (A 47) playback mode
and press the d button.
The playback menu is displayed.
2 Use the multi selector to choose g Small
More on Playback
picture and press the k button.
To cancel creating a small copy and return to playback
mode, press the d button.
3 Choose the desired copy size and press the k
button.
4 Choose Yes and press the k button.
A new, smaller copy is created.
To cancel creating a copy at a smaller size, choose No
and press the k button.
The copy is displayed with a gray frame.
D More Information
See “Image/Sound File and Folder Names” (A 130) for more information.
54
Playback menu
Protect
Rotate image
Small picture
Voice memo
Copy
Exit
Small picture
640×480
320
×
240
160
×
120
Exit
Create small picture file?
No
Ye s
Page 67
Voice Memos: Recording and Playback
Bac k
17s
Use the camera’s built-in microphone to record voice memos for pictures.
Recording Voice Memos
1 Display the desired picture in full-frame
playback mode (A 26) and press the d
button.
The playback menu is displayed.
2 Use the multi selector to choose E Voice
memo and press the k button.
The screen for recording voice memos is displayed.
3 Press and hold the k button to record a voice
memo.
Recording ends after about 20 seconds or when the k
button is released.
Do not touch the built-in microphone during recording.
During recording, o and p blink in the monitor.
When recording ends, the voice memo playback screen is
displayed. Follow the instructions in step 3 of ”Playing
Voice Memos” (A 56) to play the voice memo.
Press the d button before or after recording a voice
memo to return to full-frame playback mode.
D More Information
See “Image/Sound File and Folder Names” (A 130) for more information.
Playback menu
Protect
Rotate image
Small picture
Voice memo
Copy
Exit
Back
Back
0s0s0s
17s
17s
More on Playback
55
Page 68
Voice Memos: Recording and Playback
444
0004.JPG
15/05/2009 15:30
Bac k
Playing Voice Memos
Pictures for which voice memos have been recorded are indicated by p in fullframe playback mode.
1 Display the desired picture in full-
frame playback mode (A 26) and
15/05/2009 15:30
15/05/2009 15:30
0004.JPG
0004.JPG
press the d button.
The playback menu is displayed.
4
///
2 Use the multi selector to choose E Voice
memo and press the k button.
The screen for playing voice memos is displayed.
More on Playback
Playback menu
3 Press the k button to listen to the voice
memo.
Playback ends when the voice memo ends or the k
button is pressed again.
Rotate the zoom control g or f to adjust the volume.
Press the d button before or after playing a voice
memo to return to full-frame playback mode.
Deleting Voice Memos
Select a picture with a voice memo and press the l
button. Use the multi selector to choose w and press
the k button. Only the voice memo will be deleted.
B Voice Memos
• When a picture with a voice memo attached is deleted, both the picture and its voice memo are
deleted.
• If a voice memo already exists for the current picture, it must be de leted before a new voice memo
can be recorded.
• The COOLPIX S220/S225 is not able to attach a voice memo to pictures recorded by other
cameras.
56
Back
Back
Erase 1 image?
Protect
Rotate image
Small picture
Voice memo
Copy
Exit
No
Ye s
6s6s6s
Page 69
Viewing Pictures by Date (List by Date Mode)
15/05/2009 15:30
0003.JPG
33
In C list by date mode, playback of only pictures taken on a specified date is
possible. In full-frame playback mode, just as with normal playback mode, picture
display can be enlarged, pictures can be edited, and voice memos can be
recorded and played back, movies can be played back, and still pictures can be
added to favorites folders. When the d button is pressed, the list by date menu
(A 59) is displayed, and all pictures taken on a specified date can be selected for
deletion, printing, and protection.
Selecting a Date in List by Date Mode
1 Press the c button in playback
mode to display the playback-mode
selection menu and press the multi
selector H or I to choose C, and
then press the k button.
Dates for which pictures exist will be listed.
List by date
2 Choose the desired date and press the k
List by date
button.
Camera lists up to 29 dates. If pictures exist for more than
29 dates, all pictures recorded earlier than most recent 29
dates will be listed together as Others.
The first picture taken on the selected date will be
displayed full-frame.
Pressing the k button sorts the displayed images to the
favorites folder (A 65).
Rotate the zoom control to f (h) in full-frame playback
mode to return to the list by date screen.
B Notes on List by Date Mode
• Up to 9,000 pictures can be displayed in list by date mode. If more pictures exist, “*” is displayed
next to the number.
• Pictures taken before the date and time have been set are recognized as having been taken on 01/
01/2009.
15/05/2009 15:30
15/05/2009 15:30
0003.JPG
0003.JPG
15/05/20093
10/05/20092
Others
More on Playback
40
33
57
Page 70
Viewing Pictures by Date (List by Date Mode)
Using List by Date Mode
The following operations are available in the list by date screen.
ToUseDescriptionA
Select datePress the multi selector H or I to select a date.9
Press the k button to display the first picture
Switch to fullframe playback
Delete picture
View list by date
menu
More on Playback
Change playback
mode
Switch to
shooting mode
taken on the selected date.
k
Rotate the zoom control to f (h) in full-frame
playback mode to return to the list by date
screen.
Press the l button to delete all pictures taken on
the selected date. Choose Yes on the
l
confirmation dialog to be displayed.
Press the d button to display the list by date
d
menu.
Press the c button to display the playback-
c
mode selection menu.
A
Press the A button or the shutter-release button
to return to the last shooting mode selected.
26
26
59
8
26
58
Page 71
Viewing Pictures by Date (List by Date Mode)
List by Date Menu
Press the d button in list by date mode to display the following menus for only
the pictures taken on the specified date.
Quick retouch*➝A 51
D-Lighting*➝A 52
Print set➝A 90
Slide show➝A 107
Delete➝A 108
Protect➝A 108
Rotate image*➝A 109
Small picture*➝A 54
Voice memo*➝A 55
* During full-frame playback only
When the d button is pressed in the list by date screen (A 57), options can be
applied to all pictures taken on the same date, or all pictures taken on the same
date can be deleted. To apply options to individual pictures, or to select individual
pictures for deletion, display a picture full-frame and press the d button.
B Print Set
When print marking already exists for pictures taken on dates other than that specified, a
confirmation dialog Save print marking for other dates? will be displayed.
• Yes: Add the previously marked pictures to the current print set.
• No: Remove print marking from the pictures previously marked.
More on Playback
59
Page 72
Image Searching in Auto Sort Mode
0004.JPG
41
15/05/2009 15:30
Pictures and movies will automatically be sorted in any of the following folders
during shooting. If F auto sort mode is selected, pictures and movies can be
viewed by selecting the folder to which they were sorted with shooting.
a SmileD Portraitsu Food
U LandscapeV Dusk to dawnD Close-ups
D MovieX Retouched copiesW Other scenes
In full-frame playback mode, just as with the normal playback mode, picture
display can be enlarged, pictures can be displayed in thumbnails, edited, and
voice memos can be recorded and played back, movies can be played back, and
still pictures can be added to favorites folders. When the d button is pressed,
the auto sort menu (A 62) is displayed, and all pictures sorted to the same
category can be selected for deletion, printing, and protection.
Displaying Pictures in Auto Sort Mode
1 Press the c button in playback
More on Playback
mode to display the playback-mode
selection menu and press the multi
selector H or I to choose F, and
then press the k button.
A list of categories appears. For details of
categories, see “Categories and the Contents”
(A 61).
The pictures in the folder are displayed.
Auto sort
2 Choose the desired folder icon and press the
k button.
The picture in the selected folder will be displayed in fullframe playback mode.
60
The icon of the category currently played back will be
displayed in the top right of the screen.
Pressing the k button sorts the displayed images to the
favorites folder (A 65).
Portraits
15/05/2009 15:30
15/05/2009 15:30
0004.JPG
0004.JPG
41
Page 73
Image Searching in Auto Sort Mode
Categories and the Contents
Folder nameDescription
a SmilePictures taken in smile mode (A 45) are displayed.
D Portraits
U LandscapePictures taken in Landscape* scene mode (A 33) are displayed.
V Dusk to dawn
D Close-ups
u FoodPictures taken in Food scene mode (A 41) are displayed.
D MovieMovies recorded in movie mode (A 70) are displayed.
X Retouched copies
W Other scenes
* The pictures taken in Scene auto selector scene mode (A 40) are included.
Pictures taken with Face Priority (A 102) in A (auto) mode
(A 20) or those taken in Portrait*, Night Portrait*, Party/indoor, or Backlight* scene mode (A 33) are displayed.
Pictures taken in Night landscape*, Sunset, Dusk/dawn or
Fireworks show scene mode (A 33) are displayed.
Pictures taken in Close-up* scene mode (A 33) or with macro
(A 31) in A (auto) mode are displayed.
Pictures created using quick retouch (A 51), D-Lighting (A 52),
crop (A 53) or small picture (A 54) are displayed.
All pictures that are not included in the other folders are displayed.
More on Playback
B Notes on Auto Sort Mode
• Up to 999 pictures and movie files can be added to each folder in auto sort mode. If the desired
folder already contains 999 pictures, new pictures or movies cannot be added or displayed in auto
sort mode. Display pictures and movies that could not be added to a folder in normal playback
mode (A 26) or list by date mode (A 57).
• Pictures or movies copied from the internal memory or the memory card (A 109) cannot be
displayed in auto sort mode.
• Pictures or movies recorded by a camera other than the COOLPIX S220/S225 cannot be displayed
in auto sort mode.
61
Page 74
Image Searching in Auto Sort Mode
Using Auto Sort Mode
The following operations are available in the category list screen.
ToUseDescriptionA
Select the folder
name
Switch to full-frame
playback
Delete picturel
Change playback
mode
Press the multi selector H, I, J, or K to select
the folder.
Press the k button to display the first picture in
k
the selected folder.
Press the l button after selecting a category,
and a confirmation dialogue will be displayed.
Choose Yes and press the k button to delete
all pictures sorted to that category.
Press the c button to display the playback-
c
mode selection menu.
A
Switch to shooting
More on Playback
mode
Press the A button or the shutter-release
button to return to the last shooting mode
selected.
Auto Sort Menu
Press the d button in full-frame playback mode in auto sort mode to display the
following menus.
When print marking already exists for pictures sorted to categories other than that specified, a
confirmation dialog Save print marking for other images? will be displayed.
• Yes: Add the previously marked pictures to the current print set.
• No: Remove print marking from the pictures previously marked.
Pictures can be added to the favorites folder sorted by each event such as travel or
wedding. Once pictures are added to the favorites folder, only pictures in the
selected folder can be played back. One picture can be added to multiple folders.
Sorting/Playback Procedure
Preparing favorites folder (A 64)
(Play back the desired pictures to add in playback mode (A 26),
Playing back the pictures
list by date mode (A 57), or auto sort mode; A 60)
Changing the display icons for favorites folders enables you to see which pictures
have been added to a favorites folder. The icons can be changed again after
pictures have been added to the folders.
1 Press the c button in playback
mode to display the playback-mode
selection menu and press the multi
selector H or I to choose h, and
then press the k button.
A list of favorite folders is displayed.
Favorite pictures
2 Choose the favorites folder and
press the d button.
Icon selection screen is displayed.
More on Playback
3 Use the multi selector J or K to choose an
icon color and press the k button.
4 Use the multi selector H, I, J, or K to
choose an icon and press the k button.
The icon will be changed and the monitor display will
return to the list of favorite folders screen as in step 2.
Favorite pictures
Choose icon
Choose icon
Back
Choose icon
Back
B Icons for Favorites Folder
Choose icons for favorites folders separately for the internal memory and for every memory card
used. When favorite pictures stored to the internal memory, or a memory card, are played back
without an icon having been selected, icons are displayed as numbers (default setting). Remove the
memory card from the camera to change icons for the internal memory.
Pictures can be displayed by selecting the favorites folder to which they were
added in h favorite pictures mode. In full-frame playback mode, just as with
normal playback mode, picture display can be enlarged or pictures can be
displayed in thumbnails, edited, or voice memos can be recorded or played back.
1 Press the c button in playback
mode to display the playback-mode
selection menu, press the multi
selector H or I to choose h, and
press the k button.
A list of favorites folders is displayed.
If the pictures have been added to the favorites folders, pictures in those favorites folders
are displayed.
2 Choose the desired favorite folder and press
the k button.
More on Playback
The pictures in the selected favorites folder will be
displayed in full-frame playback mode.
The icon of the favorites folder currently played back will
be displayed on the top right of the screen.
Removing Pictures from Favorites
Press the k button in the full-frame display in step 2
above and the removing favorites screen will be
displayed.
To remove the picture from favorites, choose Yes and
press the k button. To cancel removing, choose No
and press the k button.
B Difference between Removing and Deleting Favorites
In favorite pictures mode, pictures that have been added to the favorites folder are displayed
(A 69). Deleting a picture during playback will delete the original picture that has been added to
the favorites folder. To remove a picture from favorites without deleting it, just remove the desired
picture from favorites folder.
When print marking already exists for pictures sorted to folders other than that specified, a
confirmation dialog Save print marking for other images? will be displayed.
• Yes: Add the previously marked pictures to the current print set.
• No: Remove print marking from the pictures previously marked.
When pictures are added to a favorites folder, they are not physically copied to a favorites folder or
moved from the folder to which they were originally recorded (A 130). Only the file names of
pictures are added to favorites folders. In favorite pictures mode, pictures with file names that have
been added to the favorites folder are played back. Deleting a picture (A 26, 67, 108) during
playback will delete the original picture that has been added to favorites, so be careful when
deleting pictures.
Adding to Favorites
Internal memory and memory card
Favorites Folder 1
0001.JPG0002.JPG
0003.JPG0004.JPG
Favorites Picture Playback
Favorites Folder 1
0001.JPG
0002.JPG
0003.JPG
Calling a filePlaybackInternal
Adds a file name
Adds a file name
memory or
memory card
0001.JPG
0002.JPG
0003.JPG
Favorites Folder 2
0001.JPG
0004.JPG
0001.JPG
0002.JPG
0003.JPG
More on Playback
69
Page 82
Movies
25s
Recording Movies
To shoot movies with sound recorded via the built-in microphone, select shooting
mode and follow the steps below.
1 Enter movie mode by pressing the
A button in shooting mode and
selecting D (press the multi selector
H or I), and then pressing the k
button.
The maximum length of the movie that can
be recorded is displayed in the monitor.
2 Press the shutter-release button all
the way down to start recording.
Camera focuses on subject in the center of
the frame.
A progress bar at the bottom of the monitor
shows the amount of recording time
remaining.
To end recording, press the shutter-release button all the way down a second time.
Recording stops automatically when the internal memory or memory card becomes full,
Movies
or recording time reaches 25 minutes.
B Recording Movies
• Flash mode (A 28), self- timer (A 30), and exposure compensation (A 32) cannot be applied or
changed. Macro mode (A 31) is available.
• Macro mode setting cannot be applied or changed while movies are being recorded. Apply or
change setting as necessary before movie recording begins.
• Optical zoom cannot be adjusted once movie recording begins. Digital zoom cannot be applied
before movie recording begins. However, digital zoom (up to 2×) can be applied while movies are
being recorded.
• The angle of view (field of view) when recording movies is smaller than when taking still pictures.
Movie
25s
25s
B Note on Recording Movies
When the movie has been fully recorded to the internal memory or memory card, the monitor
display will revert to the normal shooting mode display. Do not open the ba ttery-chamber/memory card slot cover while movies are being recorded. Removing the memory card while
movies are being recorded could result in loss of data or in damage to the camera or card.
D Changing Movie Settings
Movie options (A 71) and Electronic VR (A 72) settings can be changed.
70
Page 83
The Movie Menu
Movie options and Electronic VR (A 72) settings can be changed from the
movie menu. Press the d button in movie mode to display the movie menu
and use the multi selector to modify and apply settings.
D Movie Options
Set to D (Movie) M d (Movie menu) M D Movie options
The movie menu offers the options shown below.
OptionImage size and frame rate
J TV movie 640P
(default setting)
I TV movie 640
L Small size 320P
S Small size 320
C Movie Options and Maximum Movie Length
Option
J TV movie 640P
(default setting)
I TV movie 6401 min 19 sApprox. 14 min 10 s
L Small size 320P1 min 19 sApprox. 14 min 10 s
S Small size 3202 min 36 sApprox. 25 min
* All figures are approximate. The maximum recording time may vary with make of memory card.
This camera can record movies up to 25 minutes in length. A maximum movie length of 25
minutes is displayed, regardless of memory card capacity.
Image size: 640 × 480 pixels
Frame rate: 30 frames per second
Image size: 640 × 480 pixels
Frame rate: 15 frames per second
Image size: 320 × 240 pixels
Frame rate: 30 frames per second
Image size: 320 × 240 pixels
Frame rate: 15 frames per second
Internal memory
(approx.44 MB)
40 sApprox. 7 min 10 s
Memory card
(512 MB)
Movies
D More Information
See “Image/Sound File and Folder Names” (A 130) for more information.
71
Page 84
The Movie Menu
w Electronic VR
Set to D (Movie) M d (Movie menu) M w Electronic VR
Choose whether to use electronic VR (vibration reduction) when shooting movies.
OptionDescription
w OnReduce the effects of camera shake in all movie modes.
k Off (default setting) Disable electronic VR.
At settings other than Off, the icon for the current setting is displayed in the
monitor (A 9).
Movies
72
Page 85
Movie Playback
0010.AVI
15/05/2009 15:30
10s
In full-frame playback mode (A 26), movies are
recognized by the Movie options icon (A 71). To play
15/05/2009 15:30
15/05/2009 15:30
0010.AVI
0010.AVI
a movie, display it in full-frame playback mode and
press the k button.
Rotate the zoom control to g or f to adjust playback
volume.
Playback controls appear at the top of the monitor.
Press the multi selector J or K to choose a control,
then press the k button to perform the selected
operation. The following operations are available.
During
playback
ToUseDescription
RewindK
AdvanceL
Pause
EndQEnd playback and return to full-frame playback.
Rewind movie. Playback resumes when the k button is
released.
Advance movie. Playback resumes when the k button is
released.
Pause playback.
While paused, use the controls to perform the following
operations.
Rewind movie by one frame. Rewind continues while the
M
O
k button is pressed.
Advance movie by one frame. Advance continues while
N
the k button is pressed.
Resume playback.
P
Pausing
Volume
indicator
10s
10s
4s4s4s
Movies
Deleting Movie Files
Press the l button when displayed in full-frame
playback mode (A 26), or when selected in thumbnail
playback mode (A 47). A confirmation dialog is
displayed. Choose Yes and press the k button to delete
the movie, or choose No and press the k button to
return to the normal playback display without deleting
the movie.
Erase 1 image?
No
Ye s
73
Page 86
Voice Recordings
Making Voice Recordings
Audio voice recordings can be recorded over the built-in microphone and played
back over the built-in speaker.
1 Press the A button in shooting
mode to display the shooting-mode
selection menu and press the multi
selector H or I to select a scene
icon.
The icon for the last scene mode selected is
displayed. The default setting is x (Scene
auto selector).
Scene auto selector
2 Press the multi selector K and press H, I, J,
or K to select E, and then press the k button.
The length of recording that can be made is displayed.
Voice recording
3 Press the multi selector J or K to choose k
and press the k button to start recording.
The indicator lamp lights during recording. After about 30
Voice Recordings
seconds, the camera’s auto off function is enabled and the
monitor turns off. Press the c button to reactivate the
monitor.
See “Operations During Recording” (A 75) for more
information.
Record
4 Press J or K to choose m and press the k button to end recording.
Recording will end automatically if the internal memory or memory card becomes full,
or after 120 minutes of recording on the memory card.
D More Information
See “Image/Sound File and Folder Names” (A 130) for more information.
74
02:00:00
Page 87
Operations During Recording
Making Voice Recordings
Recording indicator
Progress indicator
Record
01:36:22
Time remaining
Index number
01
Controls display
ToUseDescription
Press the multi selector J or K.
Select a control in
the controls
display
m : press the k button to end recording.
r : press the k button to pause playback. Select k
while paused and press the k button to resume
recording.
During recording, press the multi selector H or I to
create index. Camera can skip to any index during
Create index*
playback. Start of recording is index number 01; other
numbers are assigned in ascending order, to a maximum
of 98.
* The copied files can be played back using QuickTime or any other WAV-compatible audio
players. Note that index points created with the camera cannot be used when voice
recordings are played back on computers.
Voice Recordings
75
Page 88
Playing Voice Recordings
1 Press the A button in shooting
mode to display the shooting-mode
selection menu and press the multi
selector H or I to select a scene
icon.
2 Press the multi selector K and press H, I, J,
or K to select E, and then press the k button.
The voice recording screen is displayed.
Scene auto selector
Voice recording
3 Press the multi selector J or K to select l.
4 Press H or I to choose the desired file and
Voice Recordings
76
press the k button.
Playback starts.
For more information, see “Operations During Playback”
(A 77).
Playback
Playback
15/05/2009 17:30001
15/05/2009 18:30002
26/05/2009 13:00003
15/05/2009 17:30001
15/05/2009 18:30002
26/05/2009 13:00003
00:28:13
00:28:13
Page 89
Operations During Playback
Playing Voice Recordings
Index
Progress indicator
File number
Controls display
Playback
15/05/2009 17:30001
15/05/2009 18:30002
26/05/2009 13:00003
00:25:31
Playback time
Index number
03
Date and time of recording
Rotate the zoom control to g or f to adjust playback volume.
Playback controls appear at the bottom of the monitor. Press the multi selector J
or K to choose a control, then press the k button to perform the selected
operation. The following operations are available.
ToUseDescription
Rewindn
Advanceo
Rewind voice recording. Playback resumes when the k button
is released.
Advance voice recording. Playback resumes when the k
button is released.
Skip to
previous
pSkip to previous index.
index
Skip to next
index
Pause
qSkip to next index.
rlPause playback. r changes to l.
Resume playback. l changes to r.
EndmEnd playback and return to the voice recording screen.
Deleting Sound Files
Press the l button during playback or after selecting a
sound file in the voice recording screen (use the multi
selector). A confirmation dialog will be displayed. To
delete the file, choose Yes and press the k button. To
cancel deletion, choose No and press the k button.
Delete
File will be deleted. OK?
No
Ye s
Voice Recordings
77
Page 90
Copying Voice Recordings
Copy voice recordings between the internal memory and a memory card. This
option is available only when a memory card is inserted.
1 Press the multi selector J or K to select
s in the voice recording screen (A 76,
step 3) and press the k button.
2 Use the multi selector to choose the option
and press the k button.
q: Copy recordings from internal memory to
memory card.
r: Copy recordings from memory card to internal
memory.
3 Choose the copy option and press the k
button.
Selected files: Proceed to step 4.
Copy all files: Proceed to step 5.
Voice Recordings
4 Choose the desired file.
Press the multi selector K to select the file (y). Press the
multi selector K again to cancel the selection.
• Multiple files can be selected.
• Press the k button to finalize file selection.
Playback
15/05/2009 17:30001
15/05/2009 18:30002
26/05/2009 13:00003
Copy sound files
Exit
Camera to card
Selected files
Copy all files
Exit
Select sound files
001
15/05/2009
002
15/05/2009
003
26/05/2009
004
29/05/2009
005
03/06/2009
ExitSelect
5 When a confirmation dialog is displayed, choose Yes and press the k
button.
Copying starts.
00:34:18
01
17:30
18:30
13:00
16:40
08:00
C Voice Recordings
The COOLPIX S220/S225 may be unable to play or copy sound files created with another make of
camera.
78
Page 91
Connecting to Televisions, Computers and Printers
Connecting to a TV
Connect the camera to a television using the supplied audio/video cable (AV
cable) to play back pictures on the television.
1 Turn off the camera.
2 Connect the camera to the TV using the supplied AV cable.
Connect the yellow plug to the video-in jack on the TV, and the white plug to the audioin jack.
WhiteYellow
3 Tune the television to the video channel.
See the documentation provided with your television for details.
4 Hold down the c button to turn on the
camera.
The camera enters playback mode, and the pictures
taken will be displayed on the television.
While connected to the TV, the camera monitor will
remain off.
B Connecting an AV Cable
When connecting the AV cable, be sure that the camera connector is oriented correctly. Do not use
force when connecting the AV cable to the camera. When disconnecting the AV cable, do not pull
the connector at an angle.
B Video Mode
Be sure that the camera’s video mode setting conforms to the standard used by your television. The
video mode setting is an option set in the setup menu (A 111)>Video mode (A 124).
Connecting to Televisions, Computers and Printers
79
Page 92
Connecting to a Computer
Use the supplied USB cable to connect the camera to a computer, and copy
(transfer) pictures to a computer with the supplied Nikon Transfer software.
Before Connecting the Camera
Install the Software
Before connecting the camera to a computer, software, including Nikon Transfer
and Panorama Maker for creating panorama images, must be installed from the
Connecting to Televisions, Computers and Printers
supplied Software Suite CD. For more information on installing the software, refer
to the Quick Start Guide.
Compatible Operating Systems
Windows
Preinstalled versions of Windows Vista Service Pack 1 (32-bit Home Basic/Home
Premium/Business/Enterprise/Ultimate editions),
Windows XP Service Pack 3 (Home Edition/Professional)
Macintosh
Mac OS X (version 10.3.9, 10.4.11, 10.5.5)
Refer to the Nikon website for the latest information on operating system
compatibility.
B Notes on Power Source
• When connecting the camera to a computer or printer, use a fully charged battery to prevent the
camera from turning off unexpectedly.
• If the AC Adapter EH-62D (available separately) is used, COOLPIX S220/S225 can be powered from
a home electrical outlet. Do not use any other AC adapters as it will c ause the camera to heat up or
malfunction.
80
Page 93
Connecting to a Computer
Transferring Pictures from a Camera to a Computer
1 Start the computer to which Nikon Transfer was installed.
2 Turn off the camera.
3 Connect the camera to the computer using the supplied USB cable.
4 Turn on the camera.
The power-on lamp will light up.
Windows Vista
When the AutoPlay dialog is displayed, click Copy
pictures to a folder on my computer using Nikon
Transfer. Nikon Transfer will start.
To bypass this dialog in the future, check Always do this for this device.
Windows XP
When the action selection dialog is displayed, select Nikon Transfer Copy pictures to
a folder on my computer and click OK. Nikon Transfer will start.
To bypass this dialog in the future, check Always use this program for this action..
Mac OS X
Nikon Transfer will start automatically if Yes was selected in the Auto-Launch setting
dialog when Nikon Transfer was first installed.
Connecting to Televisions, Computers and Printers
B Connecting the USB Cable
• When connecting the USB cable, be sure that the connectors are oriented correctly.
Do not use force when connecting the USB cable. When disconnecting the USB cable, do not pull
the connector at an angle.
• Connection may not be recognized when the camera is connected to a computer via a USB hub.
81
Page 94
Connecting to a Computer
5 Transfer pictures when Nikon Transfer has finished loading.
Click Start Transfer in Nikon Transfer. At the default setting, all pictures are transferred
to the computer.
Connecting to Televisions, Computers and Printers
Start Transfer button
At the Nikon Transfer default setting, the folder to which the pictures were transferred
opens automatically when transfer ends.
If ViewNX has been installed, ViewNX will start automatically and transferred pictures can
be viewed.
For more information on using Nikon Transfer or ViewNX, refer to help information
contained in Nikon Transfer or ViewNX.
6 Disconnect the camera when transfer is complete.
Turn the camera off and disconnect the USB cable.
82
Page 95
Connecting to a Computer
D Using a Card Reader
The pictures stored on the memory card inserted into a card reader or similar device can also be
transferred to the computer using Nikon Transfer.
• If the memory card has a capacity greater than 2 GB, or is SDHC-compliant, the intended device
must support these features of the memory card.
• At the Nikon Transfer default settings, Nikon Transfer will start automatically when a memory card
is inserted into the card reader or similar device. See step 5 of “Transferring Pictures from a Camera
to a Computer” (A 82) and transfer pictures.
• To transfer pictures stored in the camera’s internal memory to the computer, the pictures must
first be copied to a memory card using the camera (A 78, 109).
D Using Standard OS Operations to Open Camera Files
• Navigate to the folder on the computer’s hard disk to which pictures were saved and open a
picture in the viewer supplied with your operating system.
• Sound files copied to the computer can be played back using QuickTime or any other WAV-
compatible audio player.
D Panorama Creation with Panorama Maker
• Use a series of pictures taken using the Panorama assist option in scene mode (A 39) to create
a single panorama photo with Panorama Maker.
• Panorama Maker can be installed to a computer using the supplied Software Suite CD.
• After installation is complete, follow the procedure described below to start Panorama Maker.
Windows
Choose Start menu>All Programs>ArcSoft Panorama Maker 4>Panorama Maker 4.
Macintosh
Open Applications by selecting Applications from the Go menu, and double-click the
Panorama Maker 4 icon.
• For more information on using Panorama Maker, refer to the on-screen instructions and help
information contained in Panorama Maker.
Connecting to Televisions, Computers and Printers
D Image File Names and Folder Names
See “Image/Sound File and Folder Names” (A 130) for more information.
83
Page 96
Connecting to a Printer
Users of PictBridge-compatible (A 147) printers can connect the camera directly
to the printer and print pictures without using a computer.
Take pictures
Select pictures for printing
Connecting to Televisions, Computers and Printers
Connect to printer (A 85)
using Print set option (A 90)
Print pictures one at a
time (A 86)
Turn camera off and disconnect USB cable
Print multiple pictures (A 87)
B Notes on Power Source
• When connecting the camera to a computer or printer, use a fully charged battery to prevent the
camera from turning off unexpectedly.
• If the AC Adapter EH-62D (available separately) is used, COOLPIX S220/S225 can be powered from
a home electrical outlet. Do not use any other AC adapters as it will c ause the camera to heat up or
malfunction.
D Printing Pictures
In addition to printing pictures transferred to a computer from your personal printer and printing
over a direct camera-to-printer connection, the following options are also available for printing
pictures:
• Insert a memory card into a DPOF-compatible printer’s card slot
• Take a memory card to a digital photo lab
For printing using these methods, specify the pictures and the number of prints each using your
camera’s Print set menu (A 90).
84
Page 97
Connecting the Camera and Printer
1 Turn off the camera.
Connecting to a Printer
2 Turn on the printer.
Check printer settings.
3 Connect the camera to the printer using the supplied USB cable.
4 Turn on the camera.
When connected correctly, the PictBridge startup screen
1 will be displayed in the camera monitor. Then the
print selection screen will be displayed 2.
12
Print selection
15/05
2009
NO. 4
[ 4]
Connecting to Televisions, Computers and Printers
B Connecting the USB Cable
When connecting the USB cable, be sure that the connectors are oriented correctly. Do not use force
when connecting the USB cable. Wh en disconnecting the USB cable, do not pull the connector at an
angle.
85
Page 98
Connecting to a Printer
Printing Pictures One at a Time
After connecting the camera to the printer correctly (A 85), print pictures by
following the procedures below.
1 Use the multi selector to choose the desired
picture and press the k button.
Rotate the zoom control to f (h) to switch to 12-
Connecting to Televisions, Computers and Printers
thumbnail display, and to g (i) to switch back to fullframe playback.
2 Choose Copies and press the k button.
3 Choose the number of copies (up to nine) and
press the k button.
4 Choose Paper size and press the k button.
5 Choose the desired Paper size and press the
k button.
To specify paper size using printer settings, choose
Default in the paper size menu.
86
Print selection
PictBridge
Start print
Copies
Paper size
Exit
Copies
Exit
PictBridge
Start print
Copies
Paper size
Exit
Paper size
Default
3.5×5 in.
5×7 in.
100×150 mm
4×6 in.
Exit
4
15/05
2009
NO. 4
[ 4]
Page 99
Connecting to a Printer
6 Choose Start print and press the k button.
PictBridge
Start print
Copies
Paper size
Exit
7 Printing starts.
Monitor display returns to the print selection screen (step 1)
when printing is complete.
To cancel before all copies have been printed, press the k
button.
Current print/
total number of prints
Printing Multiple Pictures
After connecting the camera to the printer correctly (A 85), print pictures by
following the procedures below.
Printing
002 / 004
Cancel
1 When the print selection screen is displayed,
press the d button.
The print menu is displayed.
2 Use the multi selector to choose Paper size
and press the k button.
To exit the print menu, press the d button.
Print menu
Print selection
Print all images
DPOF printing
Paper size
Exit
Connecting to Televisions, Computers and Printers
3 Choose the desired Paper size and press the
k button.
To specify paper size using printer settings, choose
Default in the paper size menu.
Paper size
Default
3.5×5 in.
5×7 in.
100×150 mm
4×6 in.
Exit
87
Page 100
Connecting to a Printer
1
1
1
4 Choose Print selection, Print all images or
DPOF printing and press the k button.
Connecting to Televisions, Computers and Printers
Print selection
Choose the pictures (up to 99) and the number
of copies (up to nine) of each.
Press the multi selector J or K to select
pictures, and press H or I to set the number of
copies for each.
Picture selected for printing can be recognized
by the check mark (y) and the numeral
indicating the number of copies to be printed.
Check marks are not displayed with pictures for
which no copies have been specified and these
pictures will not be printed.
Rotate the zoom control to g (i) to switch to
full-frame playback.
Rotate the zoom control to f (h) to switch
back to 12-thumbnail display.
Press the k button when setting is complete.
The menu shown at right will be displayed.
To print, choose Start print and press the k
button.
Choose Cancel and press the k button to
return to the print menu.
Print all images
All pictures stored in the internal memory, or on
the memory card, are printed one at a time.
The menu shown at right will be displayed.
To print, choose Start print and press the k
button.
Choose Cancel and press the k button to
return to the print menu.
Print menu
Print selection
Print all images
DPOF printing
Paper size
Exit
Print selection
1
1
Back
Print selection
prints
003
Start print
Cancel
Exit
Print all images
prints
004
Start print
Cancel
Exit
3
1
88
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.