PRODUCT OVERVIEW
StreaMaster™ CC-3 and CC-6 Receivers
Conversion of Digital
Cable to IP
The StreaMaster CC-6 receiver takes in up to two physical QAM RF inputs and outputs a unicast or multicast UDP or RTP
output per each channel desired. Each input has three tuners so each system can support up to 6 channels. The StreaMaster CC-3 receiver is a single input product with three demodulators that can support up to 3 channels. It can be wall
mounted if desired. Both of these products require a cable card that is supplied by your local cable service provider.
Input
> CC-6: 6 Demods, CC-3: 3 Demods
> Digital Cable/Cable card
(QAM256/64 Annex B)
> 44MHz to 1002MHz tuning range
> 6MHz channel bandwidth
> Up to +40dBmV single channel
IP Network support for Cable Channels
The StreaMaster CC-6 and CC-3 make life simple when
there is a need to take local cable channels and convert
them to an IP format that can be distributed over a Local Area Network.
Ideal Markets/Applications
> TV Broadcasters
> Government
> Enterprise
> Education
> TV Distribution over a LAN
> Off-air or Head-end Monitoring
> Digital Signage
Key Features
> UDP or RTP IP Streaming
> Unicast or Multicast
> Supports PC players, Media Servers and IP
Set Top Boxes
> RF Diagnostics
(Signal Level/Quality)
> Cost-effective
Simple to set up and manage
Install the management software, connect the RF inputs
and the Ethernet ports and within minutes you will have
the channels streaming over your network. We also have
a QuickTV client for Windows but support other players
such as VLC, media servers such as Adobe Media Server
or Wowza and IP Set Top Boxes such as Amino.
Sample User Interface
Delivering Video Whenever, Wherever
PHONE 925.399.7201 | FAX 925.399.7204 | www.niagara-video.com
N_CC3/6_2616
Loading...